ALBERT

Description: Size distributions of nebular solids in chondrites suggest an efficient sorting of these early forming objects within the protoplanetary disk. The effect of this sorting has been documented by investigations of modal abundances of CAIs (e.g., [1-4]) and chondrules (e.g., [5-8]). Evidence for aerodynamic sorting in the disk is largely qualitative, and needs to be carefully assessed. It may be a way of concentrating these materials into planetesimal-mass clumps, perhaps 100 fs of ka after they formed. A key parameter is size/density distributions of particles (i.e., chondrules, CAIs, and metal grains), and in particular, whether the radius-density product (rxp) is a better metric for defining the distribution than r alone [9]. There is no consensus between r versus rxp based models. Here we report our initial tests and preliminary results, which when expanded will be used to test the accuracy of current dynamical disk models.

Description: The occurrence of jarosite, other sulfates (e.g., Mg-and Ca-sulfates), and hematite along with silicic-lastic materials in outcrops of sedimentary materials at Meridiani Planum (MP) and detection of silica rich deposits in Gusev crater, Mars, are strong indicators of local acidic aqueous processes [1,2,3,4,5]. The formation of sediments at Meridiani Planum may have involved the evaporation of fluids derived from acid weathering of Martian basalts and subsequent diagenesis [6,7]. Also, our previous work on acid weathering of basaltic materials in a closed hydro-thermal system was focused on the mineralogy of the acid weathering products including the formation of jarosite and gray hematite spherules [8,9,10]. The object of this re-search is to extend our earlier qualitative work on acidic weathering of rocks to determine acidic dissolution rates of Mars analog basaltic materials at 80 C using a flow-thru reactor. We also characterized residual phases, including poorly crystalline or amorphous phases and precipitates, that remained after the treatments of olivine, siderite, and basalt which represent likely MP source rocks. This study is a stepping stone for a future simulation of the formation of MP rocks under a range of T and P.

Description: Basaltic shergottites such as Shergotty, Zagami and EET79001 contain impact melt glass pockets that are rich in Martian atmospheric gases [1] and are known as gas-rich impact-melt (GRIM) glasses. These glasses show evidence for the presence of a Martian regolith component based on Sm and Kr isotopic studies [2]. The GRIM glasses are sometimes embedded with clusters of innumerable micron-sized iron-sulfide blebs associated with minor amounts of iron sulfate particles [3, 4]. These sulfide blebs are secondary in origin and are not related to the primary igneous sulfides occurring in Martian meteorites. The material comprising these glasses arises from the highly oxidizing Martian surface and sulfur is unlikely to occur as sulfide in the Martian regoilith. Instead, sulfur is shown to occur as sulfate based on APXS and Mossbauer results obtained by the Opportunity and Spirit rovers at Meridiani and Gusev [5]. We have earlier suggested that the micron-sized iron sulfide globules in GRIM glasses were likely produced by shock-reduction of iron sulfate occurring in the regolith at the time when the GRIM glasses were produced by the meteoroid impact that launched the Martian meteorites into space [6]. As a result of high energy deposition by shock (approx. 40-60 GPa), the iron sulfate bearing phases are likely to melt along with other regolith components and will get reduced to immiscible sulfide fluid under reducing conditions. On quenching, this generates a dispersion of micron-scale sulfide blebs. The reducing agents in our case are likely to be H2 and CO which were shock-implanted from the Martian atmosphere into these glasses along with the noble gases. We conducted lab simulation experiments in the Lindhurst Laboratory of Experimental Geophysics at Caltech and the Experimental Impact Laboratory at JSC to test whether iron sulfide globules can be produced by impact-driven reduction of iron sulfate by subjecting Columbia River Basalt (CRB) and ferric sulfate mixtures to shock pressures between 40 and 50 GPa under reducing conditions. The experimental products from the recovered samples were analyzed by SEM and microprobe techniques at JSC.

Description: The assessment of indigenous organic matter in returned lunar samples was one of the primary scientific goals of the Apollo program. The levels of such organic material were expected to be and found to be small. Previous work on this topic includes Murphy et al. [1] who reported the presence of anthropogenic organics with sub-ppm concentrations in Apollo 11 fines. In Apollo 12 samples, Preti et al. [2] detected low levels, 〈 10 ppb or below, of more complex organic material that may have been synthesized by abrupt heating during analysis. Kvenvolden et al. [3] detected porphyrin-like pigments at the ng to pg level in an Apollo 11 bulk sample. Hodgson et al. [4] and Ponnamperuma et al. [5] suggested that most if not all porphyrins were synthesized from rocket fuel during module landing. Chang et al. [6] reported indigenous carbon ranging from 5-20 g/g in the form of metal carbides in Apollo 11 fines. Hare et al. [7] reported amino acids at he 50 ng/g level in Apollo 11 samples but suggested the results may be explained as contamination. More recently, Clemett et al. [8] reported simple polycyclic aromatic hydrocarbons at concentrations of 〈 1ppm in an Apollo 16 soil. Low concentrations of lunar organics may be a consequence not only of its paucity, but also its heterogeneous distribution. If the sample size required for a measurement is large relative to the localization of organics, detection is limited not by ultimate sensitivity but rather by the ability to distinguish an indigenous signature from background contamination [9].

Description: Recent remote sensing studies [e.g., 1-3] indicate that several un-sampled regions of the Moon have significantly higher concentrations of silicic material (also high in [K], [U], and [Th]) than sampled regions. Within these areas are morphological features that are best explained by the existence of chemically evolved volcanic rocks. Observations of silicic domes [e.g., 1-5] suggest that sizable networks of silicic melt were present during crust-formation. Because of these recent findings there is a renewed interest in the petrogenesis of lunar, felsic igneous rocks. Specific questions are: (1) when were these magmas generated?, and (2) what was the source material? The two main hypotheses for generating silicic melts on Earth are fractional crystallization or partial melting of preexisting crust. On the Moon silicic melts are thought to have been generated during extreme fractional crystallization involving end-stage silicate liquid immiscibility (SLI) [e.g. 6, 7]. However, SLI cannot account for the production of significant volumes of silicic melt and its wide distribution, as reported by the remote global surveys [1, 2, 3]. In addition, experimental and natural products of SLI show that U and Th, which are abundant in the lunar granites and seen in the remote sensing data of the domes, are preferentially partitioned into the depolymerized ferrobasaltic magma and not the silicic portion [8, 9]. If SLI is not the mechanism that generated silicic magmas on the Moon then alternative processes such as fractional crystallization (only crystal-liquid separation) or partial melting should be considered as viable possibilities to be tested.

Description: Immiscible sulfide melt spherules are locally very abundant in shergottite impact melts. These melts can also contain samples of Martian atmospheric gases [1], and cosmogenic nuclides [2] that are present in impact melt, but not in the host shergottite, indicating some components in the melt resided at the Martian surface. These observations show that some regolith components are, at least locally, present in the impact melts. This view also suggests that one source of the over-abundant sulfur in these impact melts could be sulfates that are major constituents of Martian regolith, and that the sulfates were reduced during shock heating to sulfide. An alternative view is that sulfide spherules in impact melts are produced solely by melting the crystalline sulfide minerals (dominantly pyrrhotite, Fe(1-x)S) that are present in shergottites [3]. In this abstract we report new analyses of the compositions of sulfide immiscible melt spherules and pyrrhotite in the shergottites Tissint, and EETA79001,507, and we use these data to investigate the possible origins of the immiscible sulfide melt spherules. In particular, we use the metal/S ratios determined in these blebs as potential diagnostic criteria for tracking the source material from which the numerous sulfide blebs were generated by shock in these melts.

Description: We have recently discovered the first well-preserved calcium aluminum-rich inclusion (CAI) in a CI1 chondrite (Ivuna). Previously, all CI1 chondrites were thought to be devoid of preserved CAI and chondrules due to the near total aqueous alteration to which their parent body (bodies) have been subjected. The CAI is roughly spherical, but with a slight teardrop geometry and a maximum diameter of 170 microns (fig. 1). It lacks any Wark-Lovering Rim. Incipient aqueous alteration, and probably shock, have rendered large portions of the CAI poorly crystalline. It is extremely fine-grained, with only a few grains exceeding 10 microns. We have performed electron microprobe analyses (EPMA), FEG-SEM imaging and element mapping, as well as electron back-scattered diffraction (EBSD) and synchrotron X-ray diffraction (SXRD) in order to determine the fundamental characteristics of this apparently unique object.

Description: Differentiated and partially differentiated asteroids preserve a glimpse of planet formation frozen in time from the early solar system and thus are attractive targets for future exploration. Samples of such asteroids arrive to Earth in the form of achondrite meteorites. Many achondrites, particularly those thought to be most representative of asteroidal regolith, contain a diverse assortment of materials both indigenous and exogenous to the original igneous parent body intermixed at microscopic scales. Remote sensing spacecraft and landers would have difficulty deciphering individual components at these spatial scales, potentially leading to confusing results. Sample return would thus be much more informative than a robotic probe. In this and a companion abstract [1] we consider two regolithic achondrite types, howardites and (polymict) ureilites, in order to evaluate what materials might occur in samples returned from surfaces of differentiated asteroids and what sampling strategies might be prudent.