ALBERT

Description: Multibeam sonar surveys have been conducted since their invention in the 1970s; however, mainly reflections from the seafloor were considered so far. More recently, water column imaging with multibeam is becoming of increasing interest for fisheries, buoy, mooring, or gas detection in the water column. Using ELAC SEABEAM 1000 data, we propose a technique to detect gas bubbles (flares) although this system is originally not designed to record water column data. The described data processing represents a case study and can be easily adapted to other multibeam systems. Multibeam data sets from the Black Sea and the North Sea show reflections of gas bubbles that form flares in the water column. At least for reasonably intense gas escape the detection of bubbles is feasible. The multibeam technique yields exact determination of the source position and information about the dimension of the gas cloud in the water. Compared to conventional flare imaging by single-beam echo sounders, the wide swath angle of multibeam systems allows the mapping of large areas in much shorter time.

Description: By comparison of the methane mixing ratio and the carbon isotope ratio (δ13CCH4) in Arctic air with regional background, the incremental input of CH4 in an air parcel and the source δ13CCH4 signature can be determined. Using this technique the bulk Arctic CH4 source signature of air arriving at Spitsbergen in late summer 2008 and 2009 was found to be −68‰, indicative of the dominance of a biogenic CH4 source. This is close to the source signature of CH4 emissions from boreal wetlands. In spring, when wetland was frozen, the CH4 source signature was more enriched in 13C at −53 ± 6‰ with air mass back trajectories indicating a large influence from gas field emissions in the Ob River region. Emissions of CH4 to the water column from the seabed on the Spitsbergen continental slope are occurring but none has yet been detected reaching the atmosphere. The measurements illustrate the significance of wetland emissions. Potentially, these may respond quickly and powerfully to meteorological variations and to sustained climate warming.

Description: Large internal wave breaking is observed exceeding a vertical array of 61 high-resolution temperature sensors at 1 m intervals between 7 and 67 m above the bottom. The array was moored for 5 days at 969 m of Opouawe Bank, New Zealand, a known methane seep area. As breaking internal waves dominate sediment resuspension above sloping topography in other ocean areas, they are expected to also influence methane transport. Despite being visible in single beam echosounder data, indications for turbulence due to rising gas bubbles are not found in the present 1 Hz sampled temperature records. Likely, the mooring was too far away from the very localized bubble release spot. Instead, the temperature sensors show detailed internal wave-turbulence transitions. Every tidal cycle, a solibore (a frontal turbulent bore with a train of trailing solitary waves) changes shape and intensity. These solibores are highly turbulent and they restratify the bottom boundary layer, thereby maintaining efficient mixing. Details of different turbulent bore developments are discussed. Averaged over a few tidal cycles and over the sensors range, mean vertical eddy diffusivity amounts to 3 ± 1 × 10−3 m2 s−1 and mean turbulent kinetic energy dissipation to 1.6 ± 0.7 × 10−7 W kg−1, with variations over 4 orders of magnitude. Such turbulence will affect the distribution of dissolved methane and other geochemical species in the lower 100–150 m above the bottom and their release from the bottom. The above mean values are remarkably similar to those found at various other sites in the NE Atlantic Ocean.

Description: Bubbles evolving from active gas seeps can be traced by hydroacoustic imaging up to 1000 m high in the Black Sea water column. Although methane concentrations are not distinguishable between the water column above the deep seep and reference sites, atmospheric noble gas measurements clearly show the constant input of gases (mainly methane) via seepage into the Black Sea. Archaea (ANME-1, ANME-2) and methanotrophic bacteria detected with specific 16S rRNA-targeted oligonucleotide probes are related to active gas seeps in the oxic and anoxic water column. It is suggested that methane seeps have a much greater influence on the Black Sea methane budget than previously acknowledged and that ANME-1 and ANME-2 are injected via gas bubbles from the sediment into the anoxic water column mediating methane oxidation. Our results show further that only minor amounts of methane evolving from Black Sea gas seeps reach the atmosphere due to the very effective microbial barrier. Hence only major thermodynamically and/or tectonically triggered gas hydrate dissociation has the potential to induce rapid climate changes as suggested by the “clathrate gun hypothesis.”

Description: There is growing concern about the transfer of methane originating from water bodies to the atmosphere. Methane from sediments can reach the atmosphere directly via bubbles or indirectly via vertical turbulent transport. This work quantifies methane gas bubble dissolution using a combination of bubble modeling and acoustic observations of rising bubbles to determine what fraction of the methane transported by bubbles will reach the atmosphere. The bubble model predicts the evolving bubble size, gas composition, and rise distance and is suitable for almost all aquatic environments. The model was validated using methane and argon bubble dissolution measurements obtained from the literature for deep, oxic, saline water with excellent results. Methane bubbles from within the hydrate stability zone (typically below ∼500 m water depth in the ocean) are believed to form an outer hydrate rim. To explain the subsequent slow dissolution, a model calibration was performed using bubble dissolution data from the literature measured within the hydrate stability zone. The calibrated model explains the impressively tall flares (〉1300 m) observed in the hydrate stability zone of the Black Sea. This study suggests that only a small amount of methane reaches the surface at active seep sites in the Black Sea, and this only from very shallow water areas (〈100 m). Clearly, the Black Sea and the ocean are rather effective barriers against the transfer of bubble methane to the atmosphere, although substantial amounts of methane may reach the surface in shallow lakes and reservoirs.

Description: Submarine high‐intensity methane seeps have been surveyed in the Sorokin Trough and Paleo Dnepr Area in the Black Sea from May to June, 2003 to estimate the sea‐air methane flux. The Sorokin Trough mud volcano area in around 2080 m water depth shows no direct effects on the methane concentration in the surface water and the atmosphere (average methane saturation ratios (SR) of 143%). The average sea‐air methane flux can be determined as 0.2–0.57 nmol m−2 s−1, using two different sea‐air gas exchange models; mean wind speed were extraordinary low throughout the cruise (1.16 m s−1). The investigations in the Paleo Dnepr Area (60 to 800 m water depth) reflects a more diverse pattern. Spots of high methane concentrations in the surface water have been recorded above a seep location in around 90 m water depth (SR up to 294%). The air‐sea methane flux above this seep site (0.96–2.32 nmol m−2 s−1) is 3 times higher than calculated for the surrounding shelf (0.32–0.77 nmol m−2 s−1) and 5 times higher than assessed for open Black Sea waters (water depth 〉 200 m, 0.19–0.47 nmol m−2 s−1).

Description: Bubble transport of methane from shallow seep sites in the Black Sea west of the Crimea Peninsula between 70 and 112 m water depth has been studied by extrapolation of results gained through different hydroacoustic methods and direct sampling. Ship-based hydroacoustic echo sounders can locate bubble releasing seep sites very precisely and facilitate their correlation with geological or other features at the seafloor. Here, the backscatter strength of a multibeam system was integrated with single-beam data to estimate the amount of seeps/m2 for different backscatter intensities, resulting in 2709 vents in total. Direct flux measurements by submersible revealed methane fluxes from individual vents of 0.32–0.85 l/min or 14.5–37.8 mmol/min at ambient pressure and temperature conditions. A conservative estimate of 30 mmol/min per site was used to estimate the flux into the water to be 1219–1355 mmol/s. The flux to the atmosphere was calculated by applying a bubble dissolution model taking release depth, temperature, gas composition, and bubble size spectra into account. The flux into the atmosphere (3930–4533 mol/d) or into the mixed layer (6186–6899 mol/d) from the 21.8 km2 large study area is three times higher than independently measured fluxes of dissolved methane for the same area using geochemical methods (1030–2495 mol/d). The amount of methane dissolving in the mixed layer is 2256–2366 mol/d. This close match shows that the hydroacoustic approach for extrapolating the number of seeps/m2 and the applied bubble dissolution model are suitable to extrapolate methane fluxes over larger areas.

Description: In marine sedimentary environments, microbial methanotrophy represents an important sink for methane before it leaves the seafloor and enters the water column. Using benthic observatories in conjunction with numerical modeling of pore water gradients, we investigated seabed methane emission rates at cold seep sites with underlying gas hydrates at Hydrate Ridge, Cascadia margin. Measurements were conducted at three characteristic sites which have variable fluid flow and sulfide flux and sustain distinct chemosynthetic communities. In sediments covered with microbial mats of Beggiatoa, seabed methane efflux ranges from 1.9 to 11.5 mmol m−2 d−1. At these sites of relatively high advective flow, total oxygen uptake was very fast, yielding rates of up to 53.4 mmol m−2 d−1. In sediments populated by colonies with clams of the genus Calyptogena and characterized by low advective flow, seabed methane emission was 0.6 mmol m−2 d−1, whereas average total oxygen uptake amounted to only 3.7 mmol m−2 d−1. The efficiency of methane consumption at microbial mat and clam field sites was 66 and 83%, respectively. Our measurements indicate a high potential capacity of aerobic methane oxidation in the benthic boundary layer. This layer potentially restrains seabed methane emission when anaerobic methane oxidation in the sediment becomes saturated or when methane is bypassing the sediment matrix along fractures and channels.

Description: We use new gas-hydrate geochemistry analyses, echosounder data, and three-dimensional P-Cable seismic data to study a gas-hydrate and free-gas system in 1200 m water depth at the Vestnesa Ridge offshore NW Svalbard. Geochemical measurements of gas from hydrates collected at the ridge revealed a thermogenic source. The presence of thermogenic gas and temperatures of similar to 3.3 degrees C result in a shallow top of the hydrate stability zone (THSZ) at similar to 340 m below sea level (mbsl). Therefore, hydrate-skinned gas bubbles, which inhibit gas-dissolution processes, are thermodynamically stable to this shallow water depth. This was confirmed by hydroacoustic observations of flares in 2010 and 2012 reaching water depths between 210 and 480 mbsl. At the seafloor, bubbles are released from acoustically transparent zones in the seismic data, which we interpret as regions where free gas is migrating through the hydrate stability zone (HSZ). These intrusions result in vertical variations in the base of the HSZ (BHSZ) of up to similar to 150 m, possibly making the shallow hydrate reservoir more susceptible to warming. Such Arctic gas-hydrate and free-gas systems are important because of their potential role in climate change and in fueling marine life, but remain largely understudied due to limited data coverage in seasonally ice-covered Arctic environments.