ISSN:
1573-4803
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract Notched impact fracture experiments have been conducted on specimens of polycarbonate in three different conditions, (a) as received, (b) annealed at 125° C, and (c) electron beam irradiated to reduce the molecular weight. By consideration of the behaviour of a wide range of notch geometries four different failure modes were identified which were present in different proportions for each material. (1) Razor notched specimens failed in a completely brittle manner, well described by linear elastic fracture mechanics. (2) Small notch tip radii specimens failed in an apparently brittle manner through the formation of a single craze. (3) Some intermediate notch tip radii specimens failed in a predominantly brittle manner with small shear lips indicative of plane stress yielding. A fracture mechanics approach was used here, the measured toughness correlating with the extent of plane stress yielding. (4) Fully ductile failure was observed for large notch tip radii for all materials. It has been established that the embrittlement of polycarbonate caused by annealing is due to an increase in the yield stress, whereas that caused by reducing the molecular weight is due to a reduction of the crazing stress. In both cases, more specimens of intermediate notch tip radius are caused to fail in the low energy brittle mode designated (2) above. By varying the yield stress and crazing stress independently we have thus been able to distinguish clearly how both influence the brittle-ductile transition.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF00541662
Permalink
