ALBERT

Description: The last several years in southern Germany brought below average precipitation and high temperatures, leading to considerable challenges in water resource management. Deriving a plausible baseflow estimate is important as it affects aspects of integrated water resource management such as water usage and low flow predictions. The aim of this study is to estimate baseflow in a representative catchment in the German low mountain range and identify suitable baseflow estimation methods for this region. Several different baseflow separation methods, including digital filters, a mass balance filter (MBF) and non-continuous estimation methods were applied and compared to estimate baseflow. Using electric conductivity (EC) for the MBF, June to September and November to May were found to be suitable to estimate the EC of the baseflow and runoff component, respectively. Both weekly and continuous EC monitoring can derive similar EC value component estimates. However, EC estimation of the runoff component requires more careful consideration. The baseflow index (BFI) is estimated to be in the range of 0.4 to 0.5. The Chapman and Maxwell filter, Kille method and the Q90/Q50 ratio are recommended for baseflow estimation in the German low mountain range as they give similar results to the MBF. The Eckhardt filter requires further calibration before application.

Description: A large number of 2D models were originally developed as 1a models for the calculation of water levels along the main course of a river. Due to their development as 2D distributed models, the majority have added precipitation as a source term. The models can now be used as quasi-2D hydrodynamic rainfall–runoff models (‘HDRRM’). Within the direct rainfall method (‘DRM’), there is an approach, referred to as ‘rain-on-grid’, in which input precipitation is applied to the entire catchment area. The study contains a systematic analysis of the model behavior of HEC-RAS (‘Hydrologic Engineering Center—River Analysis System’) with a special focus on spatial resolution. The rain-on-grid approach is applied in a small, ungauged, low-mountain-range study area (Messbach catchment, 2.13 km2) in Central Germany. Suitable model settings and recommendations on model discretization and parametrization are derived therefrom. The sensitivity analysis focuses on the influence of the mesh resolution’s interaction with the spatial resolution of the underlying terrain model (‘subgrid’). Furthermore, the sensitivity of the parameters interplaying with spatial resolution, like the height of the laminar depth, surface roughness, model specific filter-settings and the precipitation input-data temporal distribution, is analyzed. The results are evaluated against a high-resolution benchmark run, and further criteria, such as 1. Nash–Sutcliffe efficiency, 2. water-surface elevation, 3. flooded area, 4. volume deficit, 5. volume balance and 6. computational time. The investigation showed that, based on the chosen criteria for this size and type of catchment, a mesh resolution between 3 m to 5 m, in combination with a DEM resolution from 0.25 m to 1 m, are recommendable. Furthermore, we show considerable scale effects on flooded areas for coarser meshing, due to low water levels in relation to topographic height.