ALBERT

Description: In this study, dynamic hardness tests on solid and engineered wood flooring specimens of Eucalyptus globulus Labill. and Eucalyptus grandis W. Hill ex Maiden hardwoods were performed because nowadays, these fast-growing hardwoods are still scarcely employed for this use. Furthermore, another two examples of hardwood commonly applied on wood flooring, Quercus robur L. and Hymenaea courbaril L., were also tested. To compare their properties, a dynamic impact hardness test based on the impact of steel balls, with several diameters, and drop heights was developed. Accordingly, 120 solid wood flooring specimens and 120 engineering wood flooring specimens were producing with these four hardwood species. Dynamic impact tests were made with three steel balls of different diameters (30–40–50 mm), and they were carried out from five different drop heights (0.60–0.75–0.90–1.05–1.20 m). The impact of the steel ball drew the size of the footprint on the surface and this mark was measured with a digital caliper for both dimensions, diameter and depth, as footprint diameter (FD) and indentation depth (ID). Data from 3000 samples, corresponding to 120 different individual groups (4 species × 3 ball diameters × 5 drop height × 2 floor type) were analyzed. Results indicated that the variability of ID (CV between 19.25–25.61%) is much greater than the values achieved for FD (CV between 6.72–7.91%). Regarding the fast-growing hardwood species tested, E. globulus showed a similar behavior to traditional hardwood applied on wood flooring in Europe, Q. robur, and it could be a promising growth in the flooring industry. However, E. grandis showed the worst values compared to traditional hardwood in all test configurations.

Description: We carried out morphological and dimensional analysis of the detritic elements deposited in the galleries of two termite species of the Kalotermitidae family present in Spain known as drywood termites (Cryptotermes brevis (Walker, 1853) and Kalotermes flavicollis (Fabricius, 1793)). This was in order to gauge the possibility of differentiating the species only on the basis of debris observation and analysis. Ten samples from six different geographical sources were analyzed and measured. Significant statistical differences were found between these two termite species in all measured parameters, and multivariate statistical models, able to predict species on the basis of dimensional measurements, were developed, with a degree of success higher than 75%. The most important dimensional differences were length and width, as well as the variable hexagonal shape of the cross-section of the detritic elements. The detritic elements of both species had a variable form of a hexagonal prism with slightly concave faces, and with pointed or rounded ends. Those of the Cryptotermes brevis species were significantly larger, less elongated, and had a smaller concavity on the faces of the prism. Color was found to be particularly variable in both species, and was not useful. Nevertheless, the debris of Kalotermes flavicollis was markedly “dirty” (mixed with other wood remains).

Description: The novelty of this study is the development of an accurate wood moisture content (MC) estimation method based on a relatively brand-new, non-destructive testing technique (drilling chips extraction). The method is especially important in the assessment of existing timber structures, where non-destructive testing (NDT) results are affected by wood MC and should be adjusted to a reference MC, usually 12%. In the assessment of timber structures, it is not possible to determine MC by oven drying method and this should be estimated. Electrical resistance and capacitance are the conventional methods used for MC estimation. This research work aims to present an accurate MC estimation method based on the drilling chips extraction technique. For that, 99 specimens (90 × 65 × 38 mm3) from three softwood and hardwood species covering a wide range of densities (from 355 to 978 kg m−3) were tested after conditioning at five different MCs (5%, 10%, 15%, 20%, 25%). The Wood Extractor device based on the drilling chips extraction technique was used. The mass of the chips collected (drilling residue) from each drill was recorded. The results show that the MC of the chips extracted was statistically significantly different than the MC of the specimen and cannot be directly used as MC determination. However, the chips MC can be used as an estimator of specimen MC with high determination coefficients (R2 from 71% to 86%). As the main result, models to estimate density directly adjusted to a reference 12% MC from the wet and dry mass of chips extracted were developed with an R2 of 98%. In sum, the drilling chips extractor is a dependable and straightforward method to estimate MC and density from only one measurement. Density adjusted to a reference 12% MC can be directly estimated from a single model.

Description: (1) The overall energy requirement of a building may be impacted by the building design, the selection of materials, the construction methods, and lifecycle management. To achieve an optimum energy-efficiency level when dealing with a new building or renovation project, it is important to improve the entire construction process as it is not enough to merely focus on the operational phase. If conventional construction practices do not evolve, compromise, or adapt to necessary changes, then it becomes challenging to deliver an ultimate low energy building. (2) This paper demonstrates the trend of off-site prefabrication and its production principles and the notions of open-building design and Design for X, as well as offering an overview of the development of automation in construction, which provides both insights and evaluations based on the context of the research. (3) Three European Union Horizon 2020 research projects were evaluated, and the outcome of the projects served as the backbone for the research and inspired the design of the proposed integrated façade system. Two design scenarios were proposed to demonstrate the potential improvements that could be achieved in a new build as well as in renovation projects. (4) The research lays a foundation for establishing a larger cross-disciplinary collaboration in the future.

Description: Research Highlights: The novelty of this study is the deep analysis of the morphologic, geometric and mechanical performance of longhorn beetle larvae mouthparts. Furthermore, a metal nano identification of jaw reinforced parts was made. Background and Objectives: Analysis of insect mechanical properties has shown an important application in the develop of bionic technologies such as new materials, industrial machines and structural concepts. This study aims to determine the mechanical and geometric properties of longhorn beetle (Stromatium unicolor Olivier 1795) larvae mouthparts to improve the development of innovative cutting tools. In addition, this study obtains a nano identification of metals in the cuticle of the mouthparts, which will enable the development of new nontoxic and sustainable preservation agents against xylophagous insects based on nanoparticles. Materials and Methods: five third-larval-stage samples of Stromatium unicolor were used to study its mandible morphologic, geometric and mechanical properties. To this end, mouthparts were analyzed by several microscopic techniques using a scanning electron microscope, a stereomicroscope and an optical microscope. Composition analysis was performed using with two Analytical-Inca X-ray detectors, dispersive energy spectroscopy and dispersive wavelength spectroscopy. Results: The main geometric parameters of the insect jaw are the edge angle (β = 77.3°), maximum path depth of the insect (120 μm), length (800 µm) and mouthpart movement, which were identified and measured. The chemical analysis results of the jaw tissues shows the presence of zinc and manganese. Conclusions: The geometry and angles of the mouthparts can be applied in the fabrication of bionic self-sharpening cutting tools. Molecular compounds that form the reinforcing elements in the jaws can be used to develop wood preservatives based on nanometals and metal absorption and metabolism inhibitors.

Description: A Tepary bean lectin fraction (TBLF) has been studied because it exhibits differential cytotoxic and anticancer effects on colon cancer. The present work focuses on the evaluation of the apoptotic mechanism of action on colon cancer cells. Initially, lethal concentrations (LC50) were obtained for the three studied cell lines (HT-29, RKO and SW-480). HT-29 showed the highest LC50, 10 and 100 times higher than that of RKO and SW-480 cells, respectively. Apoptosis was evaluated by flow cytometry, where HT-29 cells showed the highest levels of early and total apoptosis, caspases activity was confirmed and necrosis was discarded. The effect on cell cycle arrest was shown in the G0/G1 phase. Specific apoptosis-related gene expression was determined, where an increase in p53 and a decrease in Bcl-2 were observed. Expression of p53 gene showed the maximum level at 8 h with an important decrease at 12 and 24 h, also the phosphorylated p53(ser46) increased at 8 h. Our results show that TBLF induces apoptosis in colon cancer cells by p-p53(ser46) involvement. Further studies will focus on studying the specific signal transduction pathway.

Description: Desert aquatic systems are widely separated, lack hydrologic connections, and are subject to drought. However, they provide unique settings to investigate distributional patterns of micrometazoans, including rotifers. Thus, to understand rotifer biodiversity we sampled 236 sites across an array of habitats including rock pools, springs, tanks, flowing waters, playas, lakes, and reservoirs in the Chihuahuan Desert of the USA (n = 202) and Mexico (n = 34) over a period of 〉20 years. This allowed us to calculate diversity indices and examine geographic patterns in rotifer community composition. Of ~1850 recognized rotifer species, we recorded 246 taxa (~13%), with greatest diversity in springs (n = 175), lakes (n = 112), and rock pools (n = 72). Sampling effort was positively related to observed richness in springs, lakes, rivers, and tanks. Nestedness analyses indicated that rotifers in these sites, and most subsets thereof, were highly nested (support from 4 null models). Distance was positively correlated with species composition dissimilarity on small spatial scales. We predicted species richness for unsampled locations using empirical Bayesian kriging. These findings provide a better understanding of regional rotifer diversity in aridlands and provide information on potential biodiversity hotspots for aquatic scientists and resource managers.

Description: Paracoccidioides brasiliensis complex and P. lutzii are the etiological agents of paracoccidioidomycosis. The geographic distribution of these species in South America is still poorly comprehended. Fifty samples of Paracoccidioides spp. were genotyped, with 46 clinical isolates predominantly isolated in the geographic area of Ribeirão Preto, SP, and four environmental isolates collected in Ibiá, MG, southeastern Brazil. These isolates were evaluated by PCR-RFLP (Restriction Fragment Length Polymorphism) of the tub1 gene and the sequencing of the gp43 exon 2 loci. The species P. lutzii was confirmed by sequencing the internal transcribed spacer (ITS) region of the ribosomal DNA. P. brasiliensis sensu stricto S1b (n = 42) and S1a (n = 5), P. americana (n = 1), P. restrepiensis (n = 1), and P. lutzii (n = 1) were identified among the clinical isolates. All the environmental isolates were characterized as P. brasiliensis sensu stricto S1b. The patient infection by P. lutzii, P. americana (PS2), and one isolate of P. brasiliensis sensu stricto S1b most likely occurred in a geographic area far from the fungal isolation site. No association was found between the infecting genotype and the disease form. These results expand the knowledge of the Paracoccidioides species distribution and emphasize that human migration must also be considered to pinpoint the genotypes in the endemic area.

Description: Epizootic rabbit enteropathy (ERE) affects young rabbits and represents 32% of the enteropathies in rabbit production farms in Mexico. The etiology of this syndrome has not been clarified yet. A metataxonomic and histopathology study of ERE was carried out to compare the gastrointestinal microbiota and histopathological lesions of healthy and positive-ERE rabbits. The metataxonomic study was done using an Illumina MiSeq (MiSeq® system, Illumina, San Diego California, USA) massive segmentation platform, and a Divisive Amplicon Denoising Algorithm 2 (DADA2 algorithm) was used to obtain Shannon and Simpson diversity indices as well as the relative abundance of the identified communities. For the histopathological study, paraffin sections of the cecum, ileo-cecal valve, and colon were stained with eosin and hematoxylin. AxioVision 4.9 software (Carl Zeiss MicroImaging GmbH, Jena, Germany) was used to measure the crypt depths. Statistical analysis was done using PERMANOVA analysis for the metataxonomic study and ANOVA for the histopathology study. Histopathologic analysis showed smaller sizes of crypts in the colon of ERE rabbits. Differences were observed in the diversity and abundance of the gastrointestinal microbiota between the analyzed groups. The genus Clostridium and the species Cloacibacillus porcorum and Akkermansia muciniphila were associated with ERE. The results obtained from this study can provide information for future clarification of the etiology and proposals of effective treatments.