ALBERT

Description: The Atlantic Meridional Overturning Circulation (AMOC) is a key mechanism of heat, freshwater, and carbon redistribution in the climate system. The precept that the AMOC has changed abruptly in the past, notably during and at the end of the last ice age, and that it is “very likely” to weaken in the coming century due to anthropogenic climate change is a key motivation for sustained observations of the AMOC. This paper reviews the methodology and technology used to observe the AMOC and assesses these ideas and systems for accuracy, shortcomings, potential improvements, and sustainability. We review hydrographic techniques and look at how these traditional techniques can meet modern requirements. Transport mooring arrays (TMAs) provide the “gold standard” for sustained AMOC observing, utilizing dynamic height, current meter, and other instrumentation and techniques to produce continuous observations of the AMOC. We consider the principle of these systems and how they can be sustained and improved into the future. Techniques utilizing indirect measurements, such as satellite altimetry, coupled with in situ measurements, such as the Argo float array, are also discussed. Existing technologies that perhaps have not been fully exploited for estimating AMOC are reviewed and considered for this purpose. Technology is constantly evolving, and we look to the future of technology and how it can be deployed for sustained and expanded AMOC measurements. Finally, all of these methodologies and technologies are considered with a view to a sustained and sustainable future for AMOC observation.

Description: 〈jats:title〉Abstract〈/jats:title〉〈jats:p〉 〈jats:list〉 〈jats:list-item〉〈jats:p〉Herbivory is a key process on coral reefs, which, through grazing of algae, can help sustain coral‐dominated states on frequently disturbed reefs and reverse macroalgal regime shifts on degraded ones.〈/jats:p〉〈/jats:list-item〉 〈jats:list-item〉〈jats:p〉Our understanding of herbivory on reefs is largely founded on feeding observations at small spatial scales, yet the biomass and structure of herbivore populations is more closely linked to processes which can be highly variable across large areas, such as benthic habitat turnover and fishing pressure. Though our understanding of spatiotemporal variation in grazer biomass is well developed, equivalent macroscale approaches to understanding bottom‐up and top‐down controls on herbivory are lacking.〈/jats:p〉〈/jats:list-item〉 〈jats:list-item〉〈jats:p〉Here, we integrate underwater survey data of fish abundances from four Indo‐Pacific island regions with herbivore feeding observations to estimate grazing rates for two herbivore functions, cropping (which controls turf algae) and scraping (which promotes coral settlement by clearing benthic substrate), for 72 coral reefs. By including a range of reef states, from coral to algal dominance and heavily fished to remote wilderness areas, we evaluate the influences of benthic habitat and fishing on the grazing rates of fish assemblages.〈/jats:p〉〈/jats:list-item〉 〈jats:list-item〉〈jats:p〉Cropping rates were primarily influenced by benthic condition, with cropping maximized on structurally complex reefs with high substratum availability and low macroalgal cover. Fishing was the primary driver of scraping function, with scraping rates depleted at most reefs relative to remote, unfished reefs, though scraping did increase with substratum availability and structural complexity.〈/jats:p〉〈/jats:list-item〉 〈jats:list-item〉〈jats:p〉Ultimately, benthic and fishing conditions influenced herbivore functioning through their effect on grazer biomass, which was tightly correlated to grazing rates. For a given level of biomass, we show that grazing rates are higher on reefs dominated by small‐bodied fishes, suggesting that grazing pressure is greatest when grazer size structure is truncated.〈/jats:p〉〈/jats:list-item〉 〈jats:list-item〉〈jats:p〉Stressors which cause coral declines and clear substrate for turf algae will likely stimulate increases in cropping rates, in both fished and protected areas. In contrast, scraping functions are already impaired at reefs inhabited by people, particularly where structural complexity has collapsed, indicating that restoration of these key processes will require scraper biomass to be rebuilt towards wilderness levels.〈/jats:p〉〈/jats:list-item〉 〈/jats:list〉 〈/jats:p〉〈jats:p〉A free 〈jats:ext-link xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="http://onlinelibrary.wiley.com/doi/10.1111/1365-2435.13457/suppinfo"〉Plain Language Summary〈/jats:ext-link〉 can be found within the Supporting Information of this article.〈/jats:p〉

Description: Key Points Calibration of XRF core scanning data highlights the need for careful examination of sediment properties such as porosity/water Grain size and water content in the sediment trigger systematic artifacts in the signal intensity of light elements (e.g. Si and Al) Known terrigenous flux proxies (e.g Ti/Ca, Fe/Ca) are influenced by sea level variations X‐ray fluorescence (XRF) core scanning of marine and lake sediments has been extensively used to study changes in past environmental and climatic processes over a range of timescales. The interpretation of XRF‐derived element ratios in paleoclimatic and paleoceanographic studies primarily considers differences in the relative abundances of particular elements. Here we present new XRF core scanning data from two long sediment cores in the Andaman Sea in the northern Indian Ocean and show that sea level related processes influence terrigenous inputs based proxies such as Ti/Ca, Fe/Ca, and elemental concentrations of the transition metals (e.g. Mn). Zr/Rb ratios are mainly a function of changes in median grain size of lithogenic particles and often covary with changes in Ca concentrations that reflect changes in biogenic calcium carbonate production. This suggests that a common process (i.e. sea level) influences both records. The interpretation of lighter element data (e.g. Si and Al) based on low XRF counts is complicated as variations in mean grain size and water content result in systematic artifacts and signal intensities not related to the Al or Si content of the sediments. This highlights the need for calibration of XRF core scanning data based on discrete sample analyses and careful examination of sediment properties such as porosity/water content for reliably disentangling environmental signals from other physical properties. In the case of the Andaman Sea, reliable extraction of a monsoon signal will require accounting for the sea level influence on the XRF data.

Description: Back‐arc basins open in response to subduction processes, which cause extension in the upper plate, usually along trench‐parallel spreading axes. However, global seismic databases reveal that the majority of seismic events in the Lau Basin occur along transcurrent (strike‐slip) rather than extensional faults. To better characterize active deformation in this region we compared Centroid Moment Tensors (CMTs), calculated for large (Mw 〉5), shallow (〈30 km) seismic events to the orientations of seafloor lineaments mapped throughout the Lau Basin. Ship‐based multibeam was combined with vertical gravity gradient data to provide comprehensive coverage to create the lineament map. By comparing the possible focal planes of the CMTs to the orientations of the lineaments, the most likely fault plane solutions were selected, thus classifying the faults and establishing the nature of the highly variable stress regimes in the basin. We resolved the strike, dip and dip direction of 308 faults, and classified 258 additional structures by fault type. The analysis highlights a stress regime that is dominated by a combination of left‐lateral and right‐lateral strike‐slip faults, large‐scale transcurrent motion along rigid crustal‐scale fault zones, and non‐rigid diffuse deformation along pre‐existing seafloor structures, with extension mainly limited to the tips of propagating rifts and spreading centers. By resolving many of the uncertain motions on the mapped lineaments of the Lau Basin, the CMT analysis addresses a number of questions concerning basin‐scale stress regimes and microplate development, complementing GPS measurements and providing a more complete picture of the complexities of back‐arc basin development.

Description: Key Points: - Fluid flow is focused along Nootka Fault traces resulting in shallow bright spots - Two seafloor mounds are the result of basaltic intrusions in the Nootka Fault zone - Gas hydrates occur at the Nootka Slope and are imaged seismically as bottom- simulating reflectors suggesting a regional heat-flow of ~80 mW/m2 along the slope Abstract Geophysical and geochemical data indicate there is abundant fluid expulsion in the Nootka fault zone (NFZ) between the Juan de Fuca and Explorer plates and the Nootka continental slope. Here we combine observations from 〉 20 years of investigations to demonstrate the nature of fluid‐flow along the NFZ, which is the seismically most active region off Vancouver Island. Seismicity reaching down to the upper mantle is linked to near‐seafloor manifestation of fluid flow through a network of faults. Along the two main fault traces, seismic reflection data imaged bright spots 100 – 300 m below seafloor that lie above changes in basement topography. The bright spots are conformable to sediment layering, show opposite‐to‐seafloor reflection polarity, and are associated with frequency‐reduction and velocity push‐down indicating the presence of gas in the sediments. Two seafloor mounds ~15 km seaward of the Nootka slope are underlain by deep, non‐conformable high amplitude reflective zones. Measurements in the water column above one mound revealed a plume of warm water, and bottom‐video observations imaged hydrothermal vent system biota. Pore fluids from a core at this mound contain predominately microbial methane (C1) with a high proportion of ethane (C2) yielding C1/C2 ratios 〈 500 indicating a possible slight contribution from a deep source. We infer the reflective zones beneath the two mounds are basaltic intrusions that create hydrothermal circulation within the overlying sediments. Across the Nootka continental slope, gas hydrate related bottom‐simulating reflectors are widespread and occur at depths indicating heat‐flow values of 80 – 90 mW/m2.

Description: The modern history of North Atlantic sea surface temperature shows variability coinciding with changes in air temperature and rainfall over the Northern Hemisphere. There is a debate about this variability and, in particular, whether it is internal to the ocean‐atmosphere system or is forced by external factors (natural and anthropogenic). Here we present a temperature record, obtained using the Sr/Ca ratio measured in a skeleton of a sclerosponge, that shows agreement with the instrumental record over the past 150 years as well as multidecadal temperature variability over the last 600 years. Comparison with climate simulations of the last millennium shows that large cooling events recorded, in the sclerosponge, are consistent with natural (primarily volcanic activity) and anthropogenic forcings. There are, however, multidecadal periods not connected to current estimates of external forcing over the last millennium allowing for alternative explanations, such as internally driven changes in ocean and atmospheric circulation.

Description: Ice nucleating particles (INPs) affect the radiative properties of cold clouds. Knowledge concerning their concentration above ground level and their potential sources is scarce. Here we present the first highly temperature resolved ice nucleation spectra of airborne samples from an aircraft campaign during late winter in 2018. Most INP spectra featured low concentration levels (〈3 · 10−4 L−1 at −15°C). However, we also found INP concentrations of up to 1.8·10−2 L−1 at −15°C and freezing onsets as high as −7.5°C for samples mainly from the marine boundary layer. Shape and onset temperature of the ice nucleation spectra of those samples as well as heat sensitivity hint at biogenic INP. Colocated measurements additionally indicate a local marine influence rather than long-range transport. Our results suggest that even in late winter above 80°N a local marine source for biogenic INP, which can efficiently nucleate ice at high temperatures, is present.

Description: Aerosols interact with radiation and clouds. Substantial progress made over the past 40 years in observing, understanding, and modeling these processes helped quantify the imbalance in the Earth's radiation budget caused by anthropogenic aerosols, called aerosol radiative forcing, but uncertainties remain large. This review provides a new range of aerosol radiative forcing over the industrial era based on multiple, traceable, and arguable lines of evidence, including modeling approaches, theoretical considerations, and observations. Improved understanding of aerosol absorption and the causes of trends in surface radiative fluxes constrain the forcing from aerosol-radiation interactions. A robust theoretical foundation and convincing evidence constrain the forcing caused by aerosol-driven increases in liquid cloud droplet number concentration. However, the influence of anthropogenic aerosols on cloud liquid water content and cloud fraction is less clear, and the influence on mixed-phase and ice clouds remains poorly constrained. Observed changes in surface temperature and radiative fluxes provide additional constraints. These multiple lines of evidence lead to a 68% confidence interval for the total aerosol effective radiative forcing of -1.6 to -0.6 W m−2, or -2.0 to -0.4 W m−2 with a 90% likelihood. Those intervals are of similar width to the last Intergovernmental Panel on Climate Change assessment but shifted toward more negative values. The uncertainty will narrow in the future by continuing to critically combine multiple lines of evidence, especially those addressing industrial-era changes in aerosol sources and aerosol effects on liquid cloud amount and on ice clouds. Key Points: - An assessment of multiple lines of evidence supported by a conceptual model provides ranges for aerosol radiative forcing of climate change - Aerosol effective radiative forcing is assessed to be between -1.6 and -0.6 W m−2 at the 16–84% confidence level - Although key uncertainties remain, new ways of using observations provide stronger constraints for models