ALBERT

Description: This paper pays attention to magnetic flux linkage optimization of a direct-driven surface-mounted permanent magnet synchronous generator (D-SPMSG). A new compact representation of the D-SPMSG nonlinear dynamic differential equations to reduce system parameters is established. Furthermore, the nonlinear dynamic characteristics of new D-SPMSG equations in the process of varying magnetic flux linkage are considered, which are illustrated by Lyapunov exponent spectrums, phase orbits, Poincaré maps, time waveforms and bifurcation diagrams, and the magnetic flux linkage stable region of D-SPMSG is acquired concurrently. Based on the above modeling and analyses, a novel method of magnetic flux linkage optimization is presented. In addition, a 2 MW D-SPMSG 2D/3D model is designed by ANSYS software according to the practical design requirements. Finally, five cases of D-SPMSG models with different magnetic flux linkages are simulated by using the finite element analysis (FEA) method. The nephograms of magnetic flux density are agreement with theoretical analysis, which both confirm the correctness and effectiveness of the proposed approach.

Description: Quantifying the variability and changes in phenology and gross primary production (GPP) of alpine wetlands in the Qinghai–Tibetan Plateau under climate change is essential for assessing carbon (C) balance dynamics at regional and global scales. In this study, in situ eddy covariance (EC) flux tower observations and remote sensing data were integrated with a modified, satellite-based vegetation photosynthesis model (VPM) to investigate the variability in climate change, phenology, and GPP of an alpine wetland ecosystem, located in Zoige, southwestern China. Two-year EC data and remote sensing vegetation indices showed that warmer temperatures corresponded to an earlier start date of the growing season, increased GPP, and ecosystem respiration, and hence increased the C sink strength of the alpine wetlands. Twelve-year long-term simulations (2000–2011) showed that: (1) there were significantly increasing trends for the mean annual enhanced vegetation index (EVI), land surface water index (LSWI), and growing season GPP (R2 ≥ 0.59, p 〈 0.01) at rates of 0.002, 0.11 year−1 and 16.32 g·C·m−2·year−1, respectively, which was in line with the observed warming trend (R2 = 0.54, p = 0.006); (2) the start and end of the vegetation growing season (SOS and EOS) experienced a continuous advancing trend at a rate of 1.61 days·year−1 and a delaying trend at a rate of 1.57 days·year−1 from 2000 to 2011 (p ≤ 0.04), respectively; and (3) with increasing temperature, the advanced SOS and delayed EOS prolonged the wetland’s phenological and photosynthetically active period and, thereby, increased wetland productivity by about 3.7–4.2 g·C·m−2·year−1 per day. Furthermore, our results indicated that warming and the extension of the growing season had positive effects on carbon uptake in this alpine wetland ecosystem.

Description: Generally, the phase structure change of Pb(B′ B″)O 3 –PZT solid solutions near a morphotropic phase boundary (MPB) can be originated from composition variations. Here our results show that the excess PbO and the sintering temperature can also result in the ferroelectric phase structure change in the Pb(Ni 1/3 Nb 2/3 )O 3 –Pb(Zr,Ti)O 3 (PNN–PZT)-based ceramics near the MPB. The dielectric, piezoelectric, and ferroelectric properties are dependent on the tetragonal phase content ( TP ) which is closely associated with the excess PbO and the sintering temperature. The temperature dependence of the polarization ( P )–electric field ( E ) hysteresis loops reveals that the tetragonal phase in the PNN–PZT-based ceramics has a lower activation energy ( E a ) for domain wall movement than that of the rhombohedral phase, thus resulting in easier polarization rotation. This is responsible for the phase structure–electrical property relationships in the PNN–PZT-based ceramics, exhibiting the dependence of the tetragonal phase content ( TP ) on the electrical properties.

Description: Dual-wavelength laser emission is achieved by using an active/inactive/active sandwich-like structure, which can be conveniently fabricated using spin coating technique. Poly [(9, 9-dioctylfluorenyl-2, 7-diyl)-alt-co-(1, 4-benzo-(2, 1′, 3) -thiadiazole)] and polyvinyl alcohol are employed as the active and the inactive materials, respectively. Two laser wavelengths are simultaneously observed, which are attributed to the difference of the surrounding refractive index of two active waveguides in the sandwich-like structure. Each wavelength is controlled by the respective waveguide structure, meaning that multi-wavelength laser can be designed by stacking the active/inactive layer pair. These results provide more flexibility to design compact laser sources.

Description: Sensors, Vol. 18, Pages 2562: A Real-Time Imaging Algorithm Based on Sub-Aperture CS-Dechirp for GF3-SAR Data Sensors doi: 10.3390/s18082562 Authors: Guang-Cai Sun Yanbin Liu Mengdao Xing Shiyu Wang Liang Guo Jun Yang Conventional synthetic aperture radar (SAR) imaging algorithms usually require a period of time to process data that is longer than the time it takes to record one synthetic aperture or that corresponding to an adequate azimuth resolution. That is to say, the real-time processing system is idle during the long data recording time and the utilization of computational resources is low. To deal with this problem, a real-time imaging algorithm based on sub-aperture chirp scaling dechirp (CS-dechirp) is proposed in this paper. With CS-dechirp, the sub-aperture data could be processed to form an image with relatively low resolution. Subsequently, a few low-resolution images are generated as longer azimuth data are recorded. At the stage of full-resolution image generation, a coherent combination method for the low-resolution complex-value images is developed. As the low-resolution complex-value images are coherently combined one by one, the resolution is gradually improved and the full-resolution image is finally obtained. The results of a simulation and real data from the GF3-SAR validate the effectiveness of the proposed algorithm.

Description: IJERPH, Vol. 15, Pages 1808: Labor Off-Farm Employment and Cropland Abandonment in Rural China: Spatial Distribution and Empirical Analysis International Journal of Environmental Research and Public Health doi: 10.3390/ijerph15091808 Authors: Xin Deng Dingde Xu Yanbin Qi Miao Zeng Alleviating cropland misallocation is helpful for the sustainable development of agriculture. Does off-farm employment inevitably result in cropland misallocation (e.g., cropland abandonment) and threaten the sustainable development of agriculture? This study differs from prior studies in its view that off-farm employment does not necessarily result in cropland abandonment. Specifically, the study employs survey data from 8031 peasant households from 27 provinces in rural China and spatial statistics to analyze the distribution of off-farm employment and cropland abandonment. Empirical models (i.e., IV-Probit and IV-Tobit) are used to examine the quantitative relation between off-farm employment and cropland abandonment. The results are as follows. (1) The spatial distribution of off-farm employment or cropland abandonment differs among regions. Regions with a higher rate of off-farm employment show more cropland abandonment but a lower average area of cropland abandonment. (2) Off-farm employment has a significant and positive correlation with cropland abandonment. However, its square has a significant and negative correlation with cropland abandonment; i.e., there is an inverted U-shaped relationship between off-farm employment and cropland abandonment, with the turning point occurring at 46.00% off-farm employment. (3) Off-farm employment has a significant and positive correlation with the area of cropland abandonment. However, its square has a significant and negative correlation with the area; i.e., there is an inverted U-shaped relationship between off-farm employment and area, with the turning point occurring at 44.50% off-farm employment. This study reveals the relationship between off-farm employment and cropland abandonment and provides policymakers with references for use in developing sustainable agriculture.

Description: In this paper, an innovative inertial navigation system (INS) mechanization and the associated Kalman filter (KF) are developed to implement a fine alignment for the strapdown INS (SINS) on stationary base. The improved mechanization is established in the pseudo-geographic frame, which is rebuilt based on the initial position. The new mechanization eliminates the effects of linear movement errors on the heading by decoupling. Compared with the traditional local-level mechanization, it has more advantages. The proposed algorithm requires lower coarse alignment accuracy in both the open-loop and closed-loop KFs and hence can improve the system reliability and decrease the total alignment time. Moreover, for the closed-loop KF, it can decrease oscillation caused by the system errors and improve the closed-loop system stability. In addition, the proposed algorithm can also be applied to polar alignment. The performance of the proposed algorithm is verified by both simulations and experiments and the results exhibit the superior performance of the proposed approach.

Description: The study of hexagonal boron nitride (hBN) in microfluidic and nanofluidic applications at the atomic level requires accurate force field parameters to describe the water-hBN interaction. In this work, we begin with benchmark quality first principles quantum Monte Carlo calculations on the interaction energy between water and hBN, which are used to validate random phase approximation (RPA) calculations. We then proceed with RPA to derive force field parameters, which are used to simulate water contact angle on bulk hBN, attaining a value within the experimental uncertainties. This paper demonstrates that end-to-end multiscale modeling, starting at detailed many-body quantum mechanics and ending with macroscopic properties, with the approximations controlled along the way, is feasible for these systems.

Description: Sensors, Vol. 18, Pages 2952: An Autonomous Vehicle Navigation System Based on Inertial and Visual Sensors Sensors doi: 10.3390/s18092952 Authors: Xingxing Guang Yanbin Gao Henry Leung Pan Liu Guangchun Li The strapdown inertial navigation system (SINS) is widely used in autonomous vehicles. However, the random drift error of gyroscope leads to serious accumulated navigation errors during long continuous operation of SINS alone. In this paper, we propose to combine the Inertial Measurement Unit (IMU) data with the line feature parameters from a camera to improve the navigation accuracy. The proposed method can also maintain the autonomy of the navigation system. Experimental results show that the proposed inertial-visual navigation system can mitigate the SINS drift and improve the accuracy, stability, and reliability of the navigation system.

Description: Sustainability, Vol. 10, Pages 1469: Exploration of the Industrial Spatial Linkages in Urban Agglomerations: A Case of Urban Agglomeration in the Middle Reaches of the Yangtze River, China Sustainability doi: 10.3390/su10051469 Authors: Yan Yu Qianwen Han Wenwu Tang Yanbin Yuan Yan Tong The study of industrial spatial linkages of urban agglomerations is crucial to recognizing spatial structure and optimizing regional division and cooperation. The existing studies often focus on external spatial interaction at the inter-city level, but few have considered complex internal economic linkages at the inter-sector level. In this study, we established an integrated framework by combining the wave effect gradient field with the gravity model. The wave effect gradient field was used to analyze the inter-sector relation, while the gravity model was adopted to explore the spatial interactions of industry at the inter-city level. The Urban Agglomeration in the Middle Reaches of the Yangtze River (UAMRYR) was taken as a case study, which demonstrates the applicability of the proposed framework. The results indicate that there exists an imbalanced development in the network of industrial linkages in the study region. Each subgroup has presented a self-organized spatial linkage network, but the linkages between subgroups are immature. Compared with other sectors, the high-tech and internet industrial sectors contribute most to economic linkages among cities. Thus, policymakers should take actions to strengthen the inter-subgroup spatial linkages and give priority to the high-tech industries, which is necessary for the integrated and sustainable development of UAMRYR.