ALBERT

Description: In this work, we present a simple algorithm to calculate automatically the Fourier spectrum of a Sinusoidal Pulse Width Modulation Signal (SPWM). Modulated voltage signals of this kind are used in industry by speed drives to vary the speed of alternating current motors while maintaining a smooth torque. Nevertheless, the SPWM technique produces undesired harmonics, which yield stator heating and power losses. By monitoring these signals without human interaction, it is possible to identify the harmonic content of SPWM signals in a fast and continuous manner. The algorithm is based in the autocorrelation function, commonly used in radar and voice signal processing. Taking advantage of the symmetry properties of the autocorrelation, the algorithm is capable of estimating half of the period of the fundamental frequency; thus, allowing one to estimate the necessary number of samples to produce an accurate Fourier spectrum. To deal with the loss of samples, i.e., the scan backlog, the algorithm iteratively acquires and trims the discrete sequence of samples until the required number of samples reaches a stable value. The simulation shows that the algorithm is not affected by either the magnitude of the switching pulses or the acquisition noise.

Description: Along with being a dynamic process that affects large areas, desertification is also one of the most serious problems in many countries. The effects of this phenomenon threaten the sustainability of natural resources, namely water resources, agricultural production and major basic infrastructure, specifically roads and habitations. Several factors exacerbate this phenomenon such as the climate dryness, the geological and morphological characteristics of the terrain, the irrational use of space, population growth and the over-exploitation of vegetation and water resources. This work aims to evaluate the desertification index in the Oued-El-Maleh watershed, through the integration of key factors involved in the MEDALUS model (Mediterranean Desertification and Land Use) within a GIS. The model includes among its indexes: climate, vegetation, soil and management. Each index was obtained by the combination of sub-indexes. All the factors, measured and integrated into a geographic information system, enabled us to spatialize, on a synthetic map, the degree of the desertification effect throughout the watershed. This map is a managing tool available for decision-making regarding the selection of priority areas in the fight against desertification. High sensitivity to desertification class represents only 35% of the watershed. This class is concentrated in the north of the study area that corresponds to plains and low altitude. This could be explained by the dominance of agro-pastoral activity and the presence of a big population pressure.

Description: We described the occult bacteremia (OB) and bacteremia with diagnosed focus (BwF) picture among children managed as outpatients at the pediatric emergency room (PER) in southern Israel, before and after the introduction of pneumococcal conjugate vaccines (PCVs) introduction in a retrospective study enrolling all three- to 36-month-old patients with fever >38.0 °C during 2005–2014. Of 511 (0.82% of all febrile patients) true bacteremias, 230 (45%) were managed as outpatients; 96 of 230 (41.7%) had OB and 134 (3.59%) had BwF. OB and BwF rates were 0.22% and 3.02%, respectively. A significant decrease was noted in OB and BwF rates (p = 0.0008 and p = 0.02, respectively). S. pneumoniae (SP, 37.5%), K. kingae (11.4%) and Brucella spp. (8.7%) were the most common OB pathogens and SP (29.8%), S. viridans (13.4%), and Brucella spp. (12.7%) were the most common in BwF patients. PCV13 serotypes were not found among the serotypes isolated post-PCV13 introduction. During 2010–2014 there was an increase in non-PCV13 serotype isolation (p = 0.005). SP was the main pathogen isolated among patients with pneumonia, acute otitis media (AOM) and periorbital cellulitis (62.5%, 33.3% and 60%, respectively). OB and BwF decreased following the introduction of PCVs and SP was the main pathogen in both conditions. Vaccine-SP serotypes were not isolated in OB after PCV13 introduction and non-vaccine serotypes increased significantly.

Description: We present the first comparison between new fAPAR and LAI products derived from the GlobAlbedo dataset and the widely-used MODIS fAPAR and LAI products. The GlobAlbedo-derived products are produced using a 1D two-stream radiative transfer (RT) scheme designed explicitly for global parameter retrieval from albedo, with consistency between RT model assumptions and observations, as well as with typical large-scale land surface model RT schemes. The approach does not require biome-specific structural assumptions (e.g., cover, clumping, understory), unlike more detailed 3D RT model approaches. GlobAlbedo-derived values of fAPAR and LAI are compared with MODIS values over 2002–2011 at multiple flux tower sites within selected biomes, over 1200 × 1200 km regions and globally. GlobAlbedo-derived fAPAR and LAI values are temporally more stable than the MODIS values due to the smoothness of the underlying albedo, derived via optimal estimation (assimilation) using an a priori estimate of albedo derived from an albedo “climatology” (composited multi-year albedo observations). Parameters agree closely in timing but with GlobAlbedo values consistently lower than MODIS, particularly for LAI. Larger differences occur in winter (when values are lower) and in the Southern hemisphere. Globally, we find that: GlobAlbedo-derived fAPAR is ~0.9–1.01 × MODIS fAPAR with an intercept of ~0.03; GlobAlbedo-derived LAI is ~0.6 × MODIS LAI with an intercept of ~0.2. Differences arise due to the RT model assumptions underlying the products, meaning care is required in interpreting either set of values, particularly when comparing to fine-scale ground-based estimates. We present global transformations between GlobAlbedo-derived and MODIS products.

Description: The Riemannian geometry of the space Pm, of m × m symmetric positive definite matrices, has provided effective tools to the fields of medical imaging, computer vision and radar signal processing. Still, an open challenge remains, which consists of extending these tools to correctly handle the presence of outliers (or abnormal data), arising from excessive noise or faulty measurements. The present paper tackles this challenge by introducing new probability distributions, called Riemannian Laplace distributions on the space Pm. First, it shows that these distributions provide a statistical foundation for the concept of the Riemannian median, which offers improved robustness in dealing with outliers (in comparison to the more popular concept of the Riemannian center of mass). Second, it describes an original expectation-maximization algorithm, for estimating mixtures of Riemannian Laplace distributions. This algorithm is applied to the problem of texture classification, in computer vision, which is considered in the presence of outliers. It is shown to give significantly better performance with respect to other recently-proposed approaches.

Description: CAR (Cloud Absorption Radiometer) is a multi-angular and multi-spectral airborne radiometer instrument, whose radiometric and geometric characteristics are well calibrated and adjusted before and after each flight campaign. CAR was built by NASA (National Aeronautics and Space Administration) in 1984. On 16 May 2008, a CAR flight campaign took place over the well-known calibration and validation site of Railroad Valley in Nevada, USA (38.504°N, 115.692°W). The campaign coincided with the overpasses of several key EO (Earth Observation) satellites such as Landsat-7, Envisat and Terra. Thus, there are nearly simultaneous measurements from these satellites and the CAR airborne sensor over the same calibration site. The CAR spectral bands are close to those of most EO satellites. CAR has the ability to cover the whole range of azimuth view angles and a variety of zenith angles depending on altitude and, as a consequence, the biases seen between satellite and CAR measurements due to both unmatched spectral bands and unmatched angles can be significantly reduced. A comparison is presented here between CAR’s land surface reflectance (BRF or Bidirectional Reflectance Factor) with those derived from Terra/MODIS (MOD09 and MAIAC), Terra/MISR, Envisat/MERIS and Landsat-7. In this study, we utilized CAR data from low altitude flights (approx. 180 m above the surface) in order to minimize the effects of the atmosphere on these measurements and then obtain a valuable ground-truth data set of surface reflectance. Furthermore, this study shows that differences between measurements caused by surface heterogeneity can be tolerated, thanks to the high homogeneity of the study site on the one hand, and on the other hand, to the spatial sampling and the large number of CAR samples. These results demonstrate that satellite BRF measurements over this site are in good agreement with CAR with variable biases across different spectral bands. This is most likely due to residual aerosol effects in the EO derived reflectances.

Description: Sensors, Vol. 17, Pages 2771: Silver Nanoparticle Modified Electrode Covered by Graphene Oxide for the Enhanced Electrochemical Detection of Dopamine Sensors doi: 10.3390/s17122771 Authors: Jae-Wook Shin Kyeong-Jun Kim Jinho Yoon Jinhee Jo Waleed Ahmed El-Said Jeong-Woo Choi Several neurological disorders such as Alzheimer’s disease and Parkinson’s disease have become a serious impediment to aging people nowadays. One of the efficient methods used to monitor these neurological disorders is the detection of neurotransmitters such as dopamine. Metal materials, such as gold and platinum, are widely used in this electrochemical detection method; however, low sensitivity and linearity at low dopamine concentrations limit the use of these materials. To overcome these limitations, a silver nanoparticle (SNP) modified electrode covered by graphene oxide for the detection of dopamine was newly developed in this study. For the first time, the surface of an indium tin oxide (ITO) electrode was modified using SNPs and graphene oxide sequentially through the electrochemical deposition method. The developed biosensor provided electrochemical signal enhancement at low dopamine concentrations in comparison with previous biosensors. Therefore, our newly developed SNP modified electrode covered by graphene oxide can be used to monitor neurological diseases through electrochemical signal enhancement at low dopamine concentrations.

Description: Sensors, Vol. 17, Pages 2428: Comparison between Random Forests, Artificial Neural Networks and Gradient Boosted Machines Methods of On-Line Vis-NIR Spectroscopy Measurements of Soil Total Nitrogen and Total Carbon Sensors doi: 10.3390/s17102428 Authors: Said Nawar Abdul Mouazen Accurate and detailed spatial soil information about within-field variability is essential for variable-rate applications of farm resources. Soil total nitrogen (TN) and total carbon (TC) are important fertility parameters that can be measured with on-line (mobile) visible and near infrared (vis-NIR) spectroscopy. This study compares the performance of local farm scale calibrations with those based on the spiking of selected local samples from both fields into an European dataset for TN and TC estimation using three modelling techniques, namely gradient boosted machines (GBM), artificial neural networks (ANNs) and random forests (RF). The on-line measurements were carried out using a mobile, fiber type, vis-NIR spectrophotometer (305–2200 nm) (AgroSpec from tec5, Germany), during which soil spectra were recorded in diffuse reflectance mode from two fields in the UK. After spectra pre-processing, the entire datasets were then divided into calibration (75%) and prediction (25%) sets, and calibration models for TN and TC were developed using GBM, ANN and RF with leave-one-out cross-validation. Results of cross-validation showed that the effect of spiking of local samples collected from a field into an European dataset when combined with RF has resulted in the highest coefficients of determination (R2) values of 0.97 and 0.98, the lowest root mean square error (RMSE) of 0.01% and 0.10%, and the highest residual prediction deviations (RPD) of 5.58 and 7.54, for TN and TC, respectively. Results for laboratory and on-line predictions generally followed the same trend as for cross-validation in one field, where the spiked European dataset-based RF calibration models outperformed the corresponding GBM and ANN models. In the second field ANN has replaced RF in being the best performing. However, the local field calibrations provided lower R2 and RPD in most cases. Therefore, from a cost-effective point of view, it is recommended to adopt the spiked European dataset-based RF/ANN calibration models for successful prediction of TN and TC under on-line measurement conditions.