ALBERT

Description: In many practical applications snow depth is known, but snow water equivalent (SWE) is needed as well. Measuring SWE takes ∼20 times as long as measuring depth, which in part is why depth measurements outnumber SWE measurements worldwide. Here a method of estimating snow bulk density is presented and then used to convert snow depth to SWE. The method is grounded in the fact that depth varies over a range that is many times greater than that of bulk density. Consequently, estimates derived from measured depths and modeled densities generally fall close to measured values of SWE. Knowledge of snow climate classes is used to improve the accuracy of the estimation procedure. A statistical model based on a Bayesian analysis of a set of 25 688 depth–density–SWE data collected in the United States, Canada, and Switzerland takes snow depth, day of the year, and the climate class of snow at a selected location from which it produces a local bulk density estimate. When converted to SWE and tested against two continental-scale datasets, 90% of the computed SWE values fell within ±8 cm of the measured values, with most estimates falling much closer.

Description: Deposition of snow from precipitation and wind events creates layering within seasonal snowpacks. The thickness and horizontal continuity of layers within seasonal snowpacks can be highly variable, due to snow blowing around topography and vegetation, and this has important implications for hydrology, remote sensing and avalanche forecasting. In this paper, we present practical field and post-processing protocols for recording lateral variations in snow stratigraphy using near-infrared (NIR) photography. A Fuji S9100 digital camera, modified to be sensitive to NIR wavelengths, was mounted on a rail system that allowed for rapid imaging of a 10 m long snow trench excavated on the north side of Toolik Lake, Alaska (68°38′ N, 149°36′ W). Post-processing of the images included removal of lens distortion and vignetting. A tape measure running along the base of the trench provided known locations (control points) that permitted scaling and georeferencing. Snow layer heights estimated from the NIR images compared well with manual stratigraphic measurements made at 0.2 m intervals along the trench (n = 357, R2 = 0.97). Considerably greater stratigraphic detail was captured by the NIR images than in the manually recorded profiles. NIR imaging of snow trenches using the described protocols is an efficient tool for quantifying continuous microscale variations in snow layers and associated properties.

Description: Snow cover plays a major role in the climate, hydrological and ecological systems of the Arctic and other regions through its influence on the surface energy balance (e.g. reflectivity), water balance (e.g. water storage and release), thermal regimes (e.g. insulation), vegetation and trace gas fluxes. Feedbacks to the climate system have global consequences. The livelihoods and well-being of Arctic residents and many services for the wider population depend on snow conditions so changes have important consequences. Already, changing snow conditions, particularly reduced summer soil moisture, winter thaw events and rain-on-snow conditions have negatively affected commercial forestry, reindeer herding, some wild animal populations and vegetation. Reductions in snow cover are also adversely impacting indigenous peoples’ access to traditional foods with negative impacts on human health and well-being. However, there are likely to be some benefits from a changing Arctic snow regime such as more even run-off from melting snow that favours hydropower operations. ©2012 Royal Swedish Academy of Sciences

Description: Part of the Earth Observing System Aqua Advanced Microwave Scanning Radiometer (AMSR-E) Arctic sea ice validation campaign in March 2003 was dedicated to the validation of snow depth on sea ice and ice temperature products. The difficulty with validating these two variables is that neither can currently be measured other than in situ. For this reason, two aircraft flights on March 13 and 19,2003, were dedicated to these products, and flight lines were coordinated with in situ measurements of snow and sea ice physical properties. One flight was in the vicinity of Barrow, AK, covering Elson Lagoon and the adjacent Chukchi and Beaufort Seas. The other flight was farther north in the Beaufort Sea (about 73 N, 147.5 W) and was coordinated with a Navy ice camp. The results confirm the AMSR-E snow depth algorithm and its coefficients for first-year ice when it is relatively smooth. For rough first-year ice and for multiyear ice, there is still a relationship between the spectral gradient ratio of 19 and 37 GHz, but a different set of algorithm coefficients is necessary. Comparisons using other AMSR-E channels did not provide a clear signature of sea ice characteristics and, hence, could not provide guidance for the choice of algorithm coefficients. The limited comparison of in situ snow-ice interface and surface temperatures with 6-GHz brightness temperatures, which are used for the retrieval of ice temperature, shows that the 6-GHz temperature is correlated with the snow-ice interface temperature to only a limited extent. For strong temperature gradients within the snow layer, it is clear that the 6-GHz temperature is a weighted average of the entire snow layer.

Description: An overview of the March 2003 coordinated sea ice field campaign in the Alaskan Arctic is presented with reference to the papers in this special section. This campaign is part of the program to validate the Aqua Advanced Microwave Scanning Radiometer for Earth Observing System (AMSR-E) sea ice products. Standard AMSR-E sea ice products include sea ice concentration, sea ice temperature, and snow depth on sea ice. The validation program consists of three elements, namely: 1) satellite data comparisons; 2) coordinated satellite/aircraft surface measurements; and 3) modeling and sensitivity analyses. Landsat-7 and RADARSAT observations were used in comparative studies with the retrieved AMSR-E sea ice concentrations. The aircraft sensors provided high-resolution microwave imagery of the surface, atmospheric profiles of temperature and humidity, and digital records of sea ice conditions. When combined with in situ measurements, aircraft data were used to validate the AMSR-E sea ice temperature and snow-depth products. The modeling studies helped interpret the field-data comparisons, provided insight on the limitations of the AMSR-E sea ice algorithms, and suggested potential improvements to the AMSR-E retrieval algorithms.

Description: This paper examines the sensitivity of Advanced Microwave Scanning Radiometer (AMSR-E) brightness temperatures (Tbs) to surface roughness by a using radiative transfer model to simulate AMSR-E Tbs as a function of incidence angle at which the surface is viewed. The simulated Tbs are then used to examine the influence that surface roughness has on two operational sea ice algorithms, namely: 1) the National Aeronautics and Space Administration Team (NT) algorithm and 2) the enhanced NT algorithm, as well as the impact of roughness on the AMSR-E snow depth algorithm. Surface snow and ice data collected during the AMSR-Ice03 field campaign held in March 2003 near Barrow, AK, were used to force the radiative transfer model, and resultant modeled Tbs are compared with airborne passive microwave observations from the Polarimetric Scanning Radiometer. Results indicate that passive microwave Tbs are very sensitive even to small variations in incidence angle, which can cause either an over or underestimation of the true amount of sea ice in the pixel area viewed. For example, this paper showed that if the sea ice areas modeled in this paper mere assumed to be completely smooth, sea ice concentrations were underestimated by nearly 14% using the NT sea ice algorithm and by 7% using the enhanced NT algorithm. A comparison of polarization ratios (PRs) at 10.7,18.7, and 37 GHz indicates that each channel responds to different degrees of surface roughness and suggests that the PR at 10.7 GHz can be useful for identifying locations of heavily ridged or rubbled ice. Using the PR at 10.7 GHz to derive an "effective" viewing angle, which is used as a proxy for surface roughness, resulted in more accurate retrievals of sea ice concentration for both algorithms. The AMSR-E snow depth algorithm was found to be extremely sensitive to instrument calibration and sensor viewing angle, and it is concluded that more work is needed to investigate the sensitivity of the gradient ratio at 37 and 18.7 GHz to these factors to improve snow depth retrievals from spaceborne passive microwave sensors.