ISSN:
1573-2738
Keywords:
accuracy tests
;
Laser Doppler Velocimetry
;
polyethylene melts
;
slit die
;
velocity profiles
;
viscosity function
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract The flow behaviour of a low-density polyethylene melt is investigated in a specifically developed flow channel by means of Laser Doppler Velocimetry (LDV). The used flow channel is a slit die with a planar contraction of 14:1. The investigation of the velocity fields was performed in the steady state of flow. The optics of the LDV system as well as the used frequency analyser proved to be reliable for measurements of velocities down to 250μm/s. By adding TiO2 tracer particles to the pellets the signal quality as well as the signal frequency were improved. It is demonstrated that the Laser Doppler Velocimeter is suited to detect velocities of polymer melts with an error of a few per cent by comparing the measured volume flow rate to the directly determined mass flow rate. Using simple fluid mechanics the viscosity function is obtained by measuring only one velocity profile within the fully developed flow in the slit die. Over a wide range of shear rates the viscosity function obtained via LDV measurement corresponds with the viscosity function which was determined by the classical mass-flow-rate method. Both resulting viscosity functions were additionally checked by performing measurements with a capillary rheometer. The LDV setup described in this paper is a powerful experimental tool to investigate the flow behaviour of polymer melts. Its accuracy and the high spatial and temporal resolution opens a way to get more quantitative insight into the flow of polymer melts and to check the validity of model calculations.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1023/A:1009820500869
Permalink
