ISSN:
1572-8986
Keywords:
Spectroscopy
;
volatilization
;
iron
;
nickel
;
chromium
;
waste vitrification
Source:
Springer Online Journal Archives 1860-2000
Topics:
Chemistry and Pharmacology
,
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
,
Technology
Notes:
Abstract Atomic emission spectroscopy (AES) is used to monitor volatilization during waste vitrification with thermal plasmas. Model baste specimens consist of am alumino-silicate clay spiked with 10 wt. % Fe, Ni, or Cr. Specimens are vitrified in processing atmospheres with 0, 8.5, and 17 vol. % oxygen/argon concentrations. Particulate generated from condensation of the volatilized materials is collected following each specimen run and analyzed by energy dispersive X-ray analysis to determine composition. Spectra are collected from the ultraviolet range 240–380 nm in where the presence of metal vapor is readily detected. Correlation between line emission intensities and volatilization rates allows the establishment of provisional detection limits for the volatilization of Ni, Cr, Si, and Fe, of 1 × 103 g/s, 4 × 104 g/s, 2 × 104 g/s, and 5 × 105 g/s, respectively. The results of this investigation support the concept of using AES as an in-situ process monitor for feedback to optimize plasma processing of hazardous metal-containing waste.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF01447155
Permalink
