ISSN:
1089-7550
Source:
AIP Digital Archive
Topics:
Physics
Notes:
Ohmic contacts comprised of the layer sequence of W/WC/TaC/SiC showed excellent thermal stability after testing at 600 °C for 1000 h. No degradation of the specific contact resistance nor a reaction of the film with the SiC substrate was observed. From Auger electron spectroscopy depth profiles, it was found that W and WC reacted to form W2C on TaC after annealing. After annealing for several hundred hours at 1000 °C, the specific contact resistance of the W/WC/TaC/SiC contacts displayed noticeable degradation. According to secondary ion mass spectrometry (SIMS) analysis, after annealing at 1000 °C for 600 h, small but measurable changes in the electrical characteristics were associated with O incorporation at the interface between TaC and SiC. Investigation of the W/WC/TaC/SiC interface by transmission electron microscopy (TEM) indicated that a reaction between the W and WC had occurred, but there was no observed reaction with the SiC substrate. After annealing for 1000 h, substantial changes in the chemistry, the microstructure, the specific contact resistance, and the spreading resistance of the contacts were observed. To understand the mechanisms associated with the degradation of the electrical properties, SIMS and TEM analyses were performed on samples annealed for 600, 700, 800, 900, and 1000 h at 1000 °C. These findings indicated that both oxidation and metallurgical reactions played important roles in the degradation of the electrical properties. © 2001 American Institute of Physics.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1063/1.1407316
Permalink