ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

feed icon rss

Ihre E-Mail wurde erfolgreich gesendet. Bitte prüfen Sie Ihren Maileingang.

Leider ist ein Fehler beim E-Mail-Versand aufgetreten. Bitte versuchen Sie es erneut.

Vorgang fortführen?

Exportieren
Filter
  • Chemical Engineering  (98)
  • Wiley-Blackwell  (98)
  • Blackwell Publishing Ltd
  • National Academy of Sciences
  • 1980-1984  (66)
  • 1960-1964  (32)
  • 1945-1949
  • 1982  (66)
  • 1961  (21)
  • 1960  (11)
  • 1949
Sammlung
Verlag/Herausgeber
  • Wiley-Blackwell  (98)
  • Blackwell Publishing Ltd
  • National Academy of Sciences
Erscheinungszeitraum
  • 1980-1984  (66)
  • 1960-1964  (32)
  • 1945-1949
Jahr
  • 1
    Digitale Medien
    Digitale Medien
    Hoboken, NJ : Wiley-Blackwell
    AIChE Journal 28 (1982), S. 514-515 
    ISSN: 0001-1541
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Werkstoffwissenschaften, Fertigungsverfahren, Fertigung
    Zusätzliches Material: 1 Tab.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 2
    Digitale Medien
    Digitale Medien
    Hoboken, NJ : Wiley-Blackwell
    AIChE Journal 28 (1982), S. 765-772 
    ISSN: 0001-1541
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Werkstoffwissenschaften, Fertigungsverfahren, Fertigung
    Notizen: A generalized mathematical model is developed to describe the process of multicomponent adsorption on activated carbon in fixed beds. Numerical, finite difference, solutions for the adsorption of binary, and ternary organic mixtures are shown to satisfactorily match previously published experimental data.
    Zusätzliches Material: 9 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 3
    Digitale Medien
    Digitale Medien
    Hoboken, NJ : Wiley-Blackwell
    AIChE Journal 28 (1982), S. 199-207 
    ISSN: 0001-1541
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Werkstoffwissenschaften, Fertigungsverfahren, Fertigung
    Notizen: A series of seven coals of different ranks and from various locations were heated in an inert atmosphere under relatively mild conditions to measure the rates of gas evaporation. Samples crushed to various fractions in the particle size range -6+50 U.S. mesh were studied at temperatures in the range of 150 to 300°C. The results show that: (1) most water is released at 100°C, evidently an evaporation process, (2) CO2 is evolved at 150°C and above, and (3) CO is evolved at 250°C and above. An interpretive model was developed to fit the CO2 production rate and kinetic constants were obtained. Gas evolution rates are independent of particle size for the most porous coals, but vary among coals, depending on both chemical composition and physical structure. A 15% loss in heating value was incurred during drying and subsequent oxidation when the pretreatment temperature was increased from 150 to 225°C.
    Zusätzliches Material: 12 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 4
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 1 (1961), S. 40-46 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The non-Newtonian flow behavior of polyethylene has been investigated with respect to the effects of molecular weight and molecular weight distribution. Effects of die geometry on melt fracture as well as preliminary extrudate orientation studies are discussed.
    Zusätzliches Material: 16 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 5
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 22 (1982), S. 329-344 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: A new method of optimizing the fiber drawing process involving the feed roll, the heated elements and the take-up roll is presented. In this method, the process is described in terms of the filament temperature and filament extension in the drawing zone. This is in contrast to the conventional approach in which the machine control variables such as the heated element temperature, fiber feed velocity and the total draw ratio were used to describe the process. It is shown that the drawing process seldom proceeds by a simple yielding mechanism and that a one-step drawing process usually involves a yield draw followed by a post-yield stretching. Using the drawing of nylon 6 fibers as an example, it is shown that the most critical factors related to achieving the highest fiber strength in drawing from a given precursor are the yarn temperature and yarn extension at yielding and during the post-yield drawing.
    Zusätzliches Material: 17 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 6
    Digitale Medien
    Digitale Medien
    Hoboken, NJ : Wiley-Blackwell
    AIChE Journal 6 (1960), S. 619-624 
    ISSN: 0001-1541
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Werkstoffwissenschaften, Fertigungsverfahren, Fertigung
    Notizen: Liquid-liquid extraction of acetic acid from the methyl isobutyl ketone-water system was studied as a function of plate wetting characteristics and other variables in a pulsed perforated-plate extraction column.Various combinations of stainless steel plates and polyethylene plates were used with different directions of solute transfer at a constant throughput of 82.6 lb. total flow/(min.) (sq. ft. column area) and with other operating variables in the following range:Frequency  -  16 to 117.1 c./min.Amplitude  -  0.492 and 0.973 in.W/K flow ratio  -  0.46 to 2.8 lb. water/lb. ketoneThe plate wetting characteristics were found to affect the column extraction efficiency when the solute transfer was from the continuous ketone phase to water. An all polyethylene plate arrangement provided the best efficiency (H. T. U.oc = 4.1 in.) while an all stainless steel plate arrangement was less efficient (H. T. U.oc = 6.1 in.) under the most favorable operating conditions. A combination of these two arrangements in the column produced efficiencies midway between the all-plastic plate arrangement and the all-stainless steel plate arrangement.Within the column flooding limits the extraction efficiency did not seem to be affected by the plate wetting characteristics when the solute transfer was from water to the continuous ketone phase.
    Zusätzliches Material: 5 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 7
    Digitale Medien
    Digitale Medien
    Hoboken, NJ : Wiley-Blackwell
    AIChE Journal 6 (1960), S. 631-639 
    ISSN: 0001-1541
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Werkstoffwissenschaften, Fertigungsverfahren, Fertigung
    Notizen: Heat transfer and pressure-drop measurements were made with non-Newtonian aqueous thorium oxide suspensions. A comparison of the results of the two different kinds of measurement allowed the general features of non-Newtonian thorium oxide suspension heat transfer to be readily identified, thus leading to a clear understanding of anomalies observed in previous suspension heat transfer studies.Data were obtained at suspension concentrations up to 0.10 volume fraction solids, (1,000 g. of thorium/kg. of water) in systems having tube diameters of 0.318 and 1.030 in. In addition laminar-flow data were taken with a capillary-tube viscometer with a tube diameter of 1/8 in. and an L/D of 1,000. It was shown that laminar flow physical properties determined with the 1/8 in. diameter tube were satisfactory for correlating data taken with tubes up to 1.030 in. in diameter.Until the present study information was not available which would permit a choice between two different viscosities for use in correlating non-Newtonian turbulent heat transfer and flow data. The limiting viscosity at very high shear rates is shown to give a unique correlation of turbulent data for tube diameters from 0.124 to 1.030 in., whereas the use of the effective viscosity (that is the viscosity evaluated at the point value of the wall shear stress corresponding to each given flow condition) gives a pronounced diameter effect in turbulent-flow correlations.The data show that the onset of turbulence for both the pressure-drop and heat transfer measurements occurs at the same Reynolds number and is approximated by the value predicted by the Hedstrom criterion (II). The heat transfer transition region extends to Reynolds numbers a factor of four times greater than the critical, as is also the case with Newtonian materials. Heat transfer to thorium oxide slurries in fully developed turbulent flow is the same as that predicted by the usual correlations for Newtonian fluids to within the precision of the experimental data, provided that the Reynolds and Prandtl numbers are calculated with the limiting viscosity at high rates of shear, η, for this viscosity. An approximate form of Martinelli's momentum heat transfer analogy correlates the experimental results within +17 and -36%.
    Zusätzliches Material: 12 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 8
    Digitale Medien
    Digitale Medien
    Hoboken, NJ : Wiley-Blackwell
    AIChE Journal 7 (1961), S. 352-352 
    ISSN: 0001-1541
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Werkstoffwissenschaften, Fertigungsverfahren, Fertigung
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 9
    Digitale Medien
    Digitale Medien
    Hoboken, NJ : Wiley-Blackwell
    AIChE Journal 6 (1960), S. 602-605 
    ISSN: 0001-1541
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Werkstoffwissenschaften, Fertigungsverfahren, Fertigung
    Notizen: Experimental data are presented to show the points of incipient hydrate formation in the methane-propylene-water system. The addition of 1.4% propylene to methane lowered the equilibrium pressure 400 lb./sq. in. at 50°F. The locus of the four-phase equilibrium consisting of hydrate, vapor, water-rich liquid, and hydrocarbon-rich liquid was determined. This was terminated by the appearance of a critical condition at 1,370 lb./sq. in. abs. and 69.3°F., where the vapor phase contained 34.8% propylene on a dry basis. Below this pressure the hydrate, vapor, water-rich liquid equilibrium does not exist for solutions containing more than about 25% propylene. Solid-vapor equilibrium ratios were estimated for propylene hydrates. The significant features of the phase diagrams for the system are discussed in some detail.
    Zusätzliches Material: 5 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 10
    ISSN: 0001-1541
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Werkstoffwissenschaften, Fertigungsverfahren, Fertigung
    Zusätzliches Material: 1 Ill.
    Materialart: Digitale Medien
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
Schließen ⊗
Diese Webseite nutzt Cookies und das Analyse-Tool Matomo. Weitere Informationen finden Sie hier...