ALBERT

Description: We performed a teleseismic P wave tomography study using seismic events at both teleseismic and regional distances, recorded by a temporary seismic array in the Argentine Puna Plateau and adjacent regions. The tomographic images show the presence of a number of positive and negative anomalies in a depth range of 20–300 km beneath the array. The most prominent of these anomalies corresponds to a low-velocity body, located in the crust, most clearly seen in the center of the array (27°S, 67°W) between the Cerro Peinado volcano, the Cerro Blanco caldera and the Farallon Negro in the east. This anomaly (southern Puna Magmatic Body) extends from the northern most part of the array and follows the line with the highest density of stations towards the south where it becomes smaller. It is flanked by high velocities on the west and the east respectively. On the west, the high velocities might be related to the subducted Nazca plate. On the northeast the high velocity block coincides with the position of the Hombre Muerto basin in the crust and could be indicating an area of lithospheric delamination where we detected a high velocity block at 100 km depth on the eastern border of the Puna plateau, north of Galan. This block might be related to a delamination event in an area with a thick crust of Paleozoic metamorphic rocks at the border between Puna and Eastern Cordillera. In the center of the array the Southern Puna magmatic body is also flanked by high velocities but the most prominent region is located on the east and is interpreted as part of the Sierras Pampeanas lithosphere with high velocities. The position of the Sierras Pampeanas geological province is key in this area as it appears to limit the extension of the plateau towards the south.

Description: The Maule earthquake of 27th February 2010 (Mw=8.8) affected ~500 km of the Nazca-South America plate boundary in south-central Chile producing spectacular crustal deformation. Here, we present a detailed estimate of static coseismic surface offsets as measured by survey and continuous GPS, both in near- and farfield regions. Earthquake slip along the megathrust has been inferred from a joint inversion of our new data together with published GPS, InSAR, and land-level changes data using Green's functions generated by a spherical finite-element model with realistic subduction zone geometry. The combination of the data sets provided a good resolution, indicating that most of the slip was well resolved. Coseismic slip was concentrated north of the epicenter with up to 16 m of slip, whereas to the south it reached over 10m within two minor patches. A comparison of coseismic slip with the slip deficit accumulated since the last great earthquake in 1835 suggests that the 2010 event closed a mature seismic gap. Slip deficit distribution shows an apparent local overshoot that highlight cycle-to-cycle variability,which has to be taken into accountwhen anticipating future events from interseismic observations. Rupture propagation was obviously not affected by bathymetric features of the incoming plate. Instead, splay faults in the upper plate seem to have limited rupture propagation in the updip and along-strike directions. Additionally, we found that along-strike gradients in slip are spatially correlated with geometrical inflections of the megathrust. Our study suggests that persistent tectonic features may control strain accumulation and release along subduction megathrusts.

Description: On 12 September 2007, an Mw 8.4 earthquake occurred within the southern section of the Mentawai segment of the Sumatra subduction zone, where the subduction thrust had previously ruptured in 1833 and 1797. Traveltime data obtained from a temporary local seismic network, deployed between December 2007 and October 2008 to record the aftershocks of the 2007 event, was used to determine two-dimensional (2-D) and three-dimensional (3-D) velocity models of the Mentawai segment. The seismicity distribution reveals significant activity along the subduction interface and within two clusters in the overriding plate either side of the forearc basin. The downgoing slab is clearly distinguished by a dipping region of high Vp (8.0 km/s), which can be a traced to ∼50 km depth, with an increased Vp/Vs ratio (1.75 to 1.90) beneath the islands and the western side of the forearc basin, suggesting hydrated oceanic crust. Above the slab, a shallow continental Moho of less than 30 km depth can be inferred, suggesting that the intersection of the continental mantle with the subducting slab is much shallower than the downdip limit of the seismogenic zone despite localized serpentinization being present at the toe of the mantle wedge. The outer arc islands are characterized by low Vp (4.5–5.8 km/s) and high Vp/Vs (greater than 2.0), suggesting that they consist of fluid saturated sediments. The very low rigidity of the outer forearc contributed to the slow rupture of the Mw 7.7 Mentawai tsunami earthquake on 25 October 2010.

Description: We analyse data from seismic stations surrounding the Alboran Sea between Spain and North Africa to constrain variations of the lithosphere–asthenosphere boundary (LAB) in the region. The technique used is the receiver function technique, which uses S-to-P converted teleseismic waves at the LAB below the seismic stations. We confirm previous data suggesting a shallow (60–90 km) LAB beneath the Iberian Peninsula and we observe a similarly shallow LAB beneath the Alboran Sea where the lithosphere becomes progressively thinner towards the east. A deeper LAB (90–100 km) is observed beneath the Betics, the south of Portugal and Morocco. The structure of the LAB in the entire region does not seem to show any indication of subduction related features. We also observe good P receiver function signals from the seismic discontinuities at 410 and 660 km depth which do not indicate any upper-mantle anomaly beneath the entire region. This is in agreement with the sparse seismic activity in the mantle transition zone suggesting the presence of only weak and regionally confined anomalies.

Description: Frequent landsliding is one of the greatest natural hazards facing the inhabitants of Central Asia's Fergana Basin and the surrounding mountain ranges. Active tectonics in the region is rapidly building the Tien Shan, one of the highest mountain ranges on Earth, and the extreme topographic relief promotes frequent landslide activity, which causes major losses of life and property. In southwestern Kyrgyzstan alone, on average 10 people die and seven houses are destroyed each year in these sudden and rapidly moving landslides.

Description: Detailed images of the lithosphere beneath the western Bohemian Massif were obtained by analysis of more than 8500 P receiver functions. At the intersection of Regensburg-Leipzig-Rostock zone and Eger Rift, crustal thickness decreases to 26 km from approx. 31 km in the surroundings. The receiver functions display a positive phase at about 6 s delay time and a strong negative phase at 7 to 8 s, which coincides with an area of Moho updoming, CO2 mantle-derived degassing and earthquake swarm activity. These phases can be modeled by a velocity increase at 50 km and a velocity decrease at 65 km depth. The velocity decrease, observed over an area of 5300 km2, gives evidence for local asthenospheric updoming and/or a confined body of partial melt, which might be the cause for high CO2 mantle fluid flow and earthquake swarm activity in this recently nonvolcanic, intracontinental rift area.

Description: In this study we present the new tomographic code ANITA which provides 3-D anisotropic P and isotropic S velocity distribution based on P and S traveltimes from local seismicity. For the P anisotropic model, we determine four parameters for each parameterization cell. This represents an orthorhombic anisotropy with one predefined direction oriented vertically. Three of the parameters describe slowness variations along three horizontal orientations with azimuths of 0°, 60°, and 120°, and one is a perturbation along the vertical axis. The nonlinear iterative inversion procedure is similar to that used in the LOTOS code. We have implemented this algorithm for the updated data set of central Java, part of which was previously used for the isotropic inversion. It was obtained that the crustal and uppermost mantle velocity structure beneath central Java is strongly anisotropic with 7–10% of maximal difference between slow and fast velocity in different directions. In the forearc (area between southern coast and volcanoes), the structure of both isotropic and anisotropic structure is strongly heterogeneous. Variety of anisotropy orientations and highly contrasted velocity patterns can be explained by a complex block structure of the crust. Beneath volcanoes we observe faster velocities in vertical direction, which is probably an indicator for vertically oriented structures (channels, dykes). In the crust beneath the middle part of central Java, north to Merapi and Lawu volcanoes, we observe a large and very intense anomaly with a velocity decrease of up to 30% and 35% for P and S models, respectively. Inside this anomaly E-W orientation of fast velocity takes place, probably caused by regional extension stress regime. In a vertical section we observe faster horizontal velocities inside this anomaly that might be explained by layering of sediments and/or penetration of quasi-horizontal lenses with molten magma. In the mantle, trench parallel anisotropy is observed throughout the study area. Such anisotropy in the slab entrained corner flow may be due to presence of B-type olivine having predominant axis parallel to the shear direction, which appears in conditions of high water or/and melting content.

Description: As part of the South American Geodynamic Activities project we observed the present day deformation field in the territories of Chile and Argentina using the Global Positioning System. The results clearly show that the earthquake cycle dominates the contemporary surface deformation of the central and southern Andes. Compared to geological timescales, the transient elastic deformation related to subduction earthquakes presents a short-term signal which can be explained by interseismic, coseismic, and postseismic phases of interplate thrust earthquakes. We constructed the Andean Elastic Dislocation Model (AEDM) in order to subtract the interseismic loading from the observed velocities. The estimated parameters of the AEDM, and the amount and depth of coupling between the subducting Nazca and overriding South American Plates, represent long-term features and show that the seismogenic interface between both plates is fully locked and that the depth of coupling increases from north to south. The prominent signals in the residual velocity field (i.e. observed velocities minus AEDM) are obviously due to postseismic relaxation processes; they are visible in the area of the 1995 Mw 8.0 Antofagasta earthquake and in the area of the 1960 Mw 9.5 Valdivia earthquake. Although postseismic deformations, compared to geologic timescales, are short-term signals, those signals are valuable constraints on important long-term features of Andean evolution, i.e., the viscosity of the upper mantle and lower crust. The observed surface data are best fitted with a three-dimensional finite element model in which we incorporate a mantle viscosity of 4 × 1019 Pa s. The most obvious long-term deformation signal is manifested in the back-arc of the subduction zone where the Brazilian Shield thrusts beneath the Subandean zone. The style and amount of backarc shortening changes along strike of the orogen, increasing from zero in the south (latitude 〈 −38° S) to values in the order of 10 mm yr−1 close to the Bolivian Orocline. In the fore-arc, whilst we see indications for long-term E-W extension, we did not find any apparent slip partitioning. In addition to this long-term signal, we suggest that the asymmetry of interseismic and coseismic deformation may lead to tectonic structures in the fore-arc. If the coseismic deformation does not release all of the accumulated deformation, then, over many earthquake cycles, part of the interseismic deformation may be transformed into permanent long-term plastic deformation.