ALBERT

Description: Currently, society is facing a great environmental problem, due to the large amount of plastic waste generated, most of which is not subjected to any type of treatment. In this work, polyethylene film waste from the non-selectively collected fraction was catalytically pyrolyzed at 500 °C, 20 °C/min for 2 h, in a discontinuous reactor using nitrogen as an inert gas stream. The main objective of this paper is to find catalysts that decrease the viscosity of the liquid fraction, since this property is quite meaningful in thermal pyrolysis. For this purpose, the three products of catalytic pyrolysis, the gaseous fraction, the solid fraction and the liquid fraction, were separated, obtaining the yield values. After that, the aspect of the liquid fraction was studied, differentiating which catalysts produced a larger quantity of waxy fraction and which ones did not. The viscosity of these samples was measured in order to confirm the catalysts that helped to obtain a less waxy fraction. The results showed that the zeolites Y and the zeolites β used in this study favor the obtaining of a compound with a smaller amount of waxes than for example catalysts such as FCC, ZSM-5 or SnCl2.

Description: Environmental considerations have called for new developments in building technologies to bridge the gap between this need for lower impacts on the environment and ever increasing comfort. These developments were generally directed at the reduction of the energy consumption during operations. While this was indeed a mandatory first step, complete environmental life cycle analysis raises new questions. For instance, for a typical low thermal energy consumption building, the embodied energy of construction materials now becomes an important component of the environmental footprint. In addition, the usual practice in life cycle analysis now appears to call for some adaptation—due to variable parameters in time—to be implemented successfully in building analysis. These issues bring new challenges to reach the goal of integrated design, construction, commissioning, operation, maintenance, and decommissioning of sustainable buildings.

Description: Fusiform rust resistance can involve gene-for-gene interactions where resistance (Fr) genes in the host interact with corresponding avirulence genes in the pathogen, Cronartium quercuum f.sp. fusiforme (Cqf). Here, we identify trees with Fr genes in a loblolly pine population derived from a complex mating design challenged with two Cqf inocula (one gall and 10 gall mixtures). We used single nucleotide polymorphism (SNP) genotypes at sufficient density to ensure linkage between segregating markers and Fr genes identifying SNPs that explained high proportions of variance in disease incidence using BayesCp, that also were significant using Bayesian Association with Missing Data (BAMD) software. Two SNPs mapped near Fr1 and generated significant LOD scores in single marker regression analyses for Fr1/fr1 parent 17 as well as four other parents. One SNP mapped near Fr8 and was significant for parent 28. Two SNPs mapped to linkage groups not previously shown to contain Fr genes and were significant for three parents. Parent 2 showed evidence of Fr gene stacking. Our results suggest that it is feasible to identify trees segregating for Fr genes, and to map Fr genes, based on parental analysis of SNPs that cosegregate with disease incidence in designed resistance screening trials.

Description: Integrated coastal management (ICM) has been considered worldwide to be a suitable approach to realizing comprehensive schemes to protect or develop coastal regions. A complex regulatory system stretching from international to local levels provides a framework for ICM practices. This raises the question whether and to what extent ICM practices have been supported by legal and policy frameworks at the international and national levels in different settings in both developed and developing countries. This paper examines four case studies in Germany, Costa Rica, Mexico and South Africa. Two research methods were used. First, a document-based analysis was conducted in two parts: a literature review of the content of ICM, and a policy and law analysis of the jurisdictions of the four case studies and at the international level (i.e., treaties and declarations). Second, a qualitative analysis was conducted based on in-depth interviews involving 21 decision-makers representing all the case studies. With a view to enhance the effective use of international and national legal and policy instruments and their implementation in a more local site specific context, this study considers four principles currently guiding ICM practices: (i) incorporation of international instruments’ principles in national legal and policy frameworks, (ii) participation, (iii) sustainable development and (iv) monitoring. An I-P-S ((I) incorporation of international instruments’ principles in national frameworks, (P) participation (S) sustainable development) diagram is used for an integrative assessment of ICM and indicates directions for further improvements at the case study sites. The embeddedness of ICM into national legal and policy frameworks is a success factor for ICM, however, it is often limited due to a lack of implementation. Furthermore, ICM can easily be jeopardized if ICM is allocated a marginalized position.

Description: A variety of commercial instruments are available for sampling and quantifying microscopic airborne organisms from the environment. Although most samplers are highly sensitive, they are also expensive, costing thousands of dollars per unit, a price that is out of reach for many researchers, especially those looking to design experiments with replication. While looking at options to monitor pine stands for the presence of Fusarium circinatum, the causal agent of pitch canker disease, on multiple sites with several units per site, we developed a simple, low-cost spore trap that allows surveying spore abundance in outdoor environments. The trap consists of a rotating motor that holds a metal rod and two petroleum jelly-coated microscope slides. As the motor rotates, the slides collect airborne particles. To test whether the traps allowed detection of F. circinatum spores, we placed six traps on three sites: an actively-managed slash pine commercial stand located in Lake Butler, FL, a semi-managed loblolly and slash pine stand near Gainesville, FL, and a site with little perturbance at Goethe State Forest, FL, consisting of mainly slash pine trees. The slides were replaced weekly, and F. circinatum was detected by quantitative PCR using species-specific primers. Results show detection of low levels ( X ¯ = 1.7–77.1 picograms ± SE = 0.3–39.7) of the pathogen spores with high reproducibility. These traps offer a low-cost solution to spore, pollen, or small insect trapping experiments for initial or general assessment of a pathogen or species population. Their low cost has the added benefit that multiple traps can be deployed per experiment, thus increasing statistical power by using multiple replications.

Description: With future global temperatures predicted to increase, the relationship between a host, pathogen, and environment, becomes less predictable and epidemics may pose a greater risk to forests worldwide. Resistance breeding is an important disease management tool, but because tree species require long breeding times, it is necessary to develop techniques for testing current pathogen isolates against their hosts. Pitch canker disease of pines, caused by the pathogen Fusarium circinatum, is no exception and represents a threat to pine forests and commercial plantations worldwide, as it thrives at warm temperatures and high humidity. We tested growth of 15 F. circinatum isolates in culture at three temperatures: 25, 27, and 31 °C. We also evaluated the sporulation and pathogenicity of eight of the isolates on two susceptible Pinus elliotti (slash pine) open-pollinated families and one tolerant open-pollinated Pinus taeda (loblolly pine) family. Our results showed significant differences among isolates in the temperature and pathogenicity tests. All isolates showed a significant decrease in growth at 31 °C, although some showed similar growth at 25 and 27 °C. Several of the new isolates tested were more pathogenic than the isolates that the USDA Forest Service Resistance Screening Center (RSC) had been using. The new isolates have now been incorporated into their operational screening program.

Description: Sustainability, Vol. 9, Pages 1917: Land-Surface Characteristics and Climate in West Africa: Models’ Biases and Impacts of Historical Anthropogenically-Induced Deforestation Sustainability doi: 10.3390/su9101917 Authors: Souleymane Sy Nathalie Noblet-Ducoudré Benjamin Quesada Ibrahima Sy Amadou Dieye Amadou Gaye Benjamin Sultan Land Use Land-Cover Change (LULCC), such as deforestation, affects the climate system and land-atmosphere interactions. Using simulations carried out within the LUCID (Land Use and Climate, IDentification of robust Impacts) project framework, we first quantify the role of historical land-cover change induced by human activities on surface climate in West Africa. Focusing on two contrasted African regions, we find that climate responses of land-use changes are small but they are still statistically significant. In Western Sahel, a statistically significant near-surface atmospheric cooling and a decrease in water recycling are simulated in summer in response to LULCC. Over the Guinean zone, models simulate a significant decrease in precipitation and water recycling in autumn in response to LULCC. This signal is comparable in magnitude with the effect induced by the increase in greenhouse gases. Simulated climate changes due to historical LULCC could however be underestimated because: (i) the prescribed LULCC can be underestimated in those regions; (ii) the climate models underestimate the coupling strength between West African surface climate and leaf area index (LAI) and (iii) the lack of interactive LAI in some models. Finally, our study reveals indirect atmospheric processes triggered by LULCC. Over the Western Sahel, models reveal that a significant decrease in solar reflection tend to cool down the surface and thus counteract the atmospheric feedback. Conversely, over the Guinea zone, models reveal that the indirect atmospheric processes and turbulent heat fluxes dominate the climatic responses over the direct effects of LULCC.

Description: Forests, Vol. 9, Pages 586: A Low-Cost Spore Trap Allows Collection and Real-Time PCR Quantification of Airborne Fusarium circinatum Spores Forests doi: 10.3390/f9100586 Authors: Tania Quesada Jennifer Hughes Katherine Smith Keumchul Shin Patrick James Jason Smith A variety of commercial instruments are available for sampling and quantifying microscopic airborne organisms from the environment. Although most samplers are highly sensitive, they are also expensive, costing thousands of dollars per unit, a price that is out of reach for many researchers, especially those looking to design experiments with replication. While looking at options to monitor pine stands for the presence of Fusarium circinatum, the causal agent of pitch canker disease, on multiple sites with several units per site, we developed a simple, low-cost spore trap that allows surveying spore abundance in outdoor environments. The trap consists of a rotating motor that holds a metal rod and two petroleum jelly-coated microscope slides. As the motor rotates, the slides collect airborne particles. To test whether the traps allowed detection of F. circinatum spores, we placed six traps on three sites: an actively-managed slash pine commercial stand located in Lake Butler, FL, a semi-managed loblolly and slash pine stand near Gainesville, FL, and a site with little perturbance at Goethe State Forest, FL, consisting of mainly slash pine trees. The slides were replaced weekly, and F. circinatum was detected by quantitative PCR using species-specific primers. Results show detection of low levels ( X ¯ = 1.7–77.1 picograms ± SE = 0.3–39.7) of the pathogen spores with high reproducibility. These traps offer a low-cost solution to spore, pollen, or small insect trapping experiments for initial or general assessment of a pathogen or species population. Their low cost has the added benefit that multiple traps can be deployed per experiment, thus increasing statistical power by using multiple replications.

Description: This paper presents the results of three academic courses in which Entrepreneurship Promotion Programs (EPP) have been developed for engineering students at the University of Jaén. This study describes the activities and how they have been promoted using the social networks Facebook and Twitter. Grytics for Analytics software was used for monitoring Facebook activity. The use of these tools has also allowed the collaborative development of the Engineering degree competencies related to sustainability and entrepreneurship through the Materials Science disciplines. The study is based on questionnaires before and after the EPP which involved a sample of 459 engineering students. The Kaiser–Meyer–Olkin test, Kolmogorov–Smirnov test and Pearson’s correlation were used. The questionnaires show which factors have the strongest influence on the intention to undertake entrepreneurial activity. Motivation (MO), personal requirements (PR), perception of the environment (PE) and the background requirements (BR) were the factors considered. The statistical study shows that PE and PR have a strong influence on MO. Finally, through the study before and after the EPP, the success of the activities and the use of social networks have been demonstrated. The results indicate that the activities of the EPP influence the perception of the environment and the motivation of the engineering students. However, the personal requirements are not affected by the activities.

Description: Pine forests in the southern United States are a major contributor to the global economy. Through the last three decades, however, there have been concerns about the decline of pine forests attributed mostly to pests and pathogens. A combination of biotic agents and environmental factors and their interaction often influences outbreaks and the resultant damage in the forests. Southern pines experience periodic mortality from bark beetles and root rot fungi and losses from fusiform rust and pitch canker have long been important for management. In recent years, there is also growing evidence of increasing damage from foliar disease in southern pines. Early detection of diseases following changes in foliar characteristics and assessment of potential risks will help us better utilize our resources and manage these forests sustainably. In this study, we used Forest Inventory and Analysis (FIA) data to explore the intensity of foliar disease in three common pines: loblolly (Pinus taeda L.), longleaf (Pinus palustris Mill.), and slash (Pinus elliottii Engelm.) in spatial and temporal terms using tree-level and climatic variables. Results from a tree-level model suggests that crown ratio may be an important factor in pine foliar disease (p 〈 0.1). We applied the MaxEnt model, a presence-only species distribution model (SDM), to explore any association of foliar disease incidences with the climatic variables at a landscape level. Results indicate that mean dew point temperature, maximum vapor pressure deficit, and precipitation during cold months had more influence over disease incidences than other climatic variables. While the sample size is limited as this is an emerging disease in the region, our study provides a basis for further exploration of disease detection methods, disease etiology studies, and hazard mapping.