ALBERT

Notizen: The ion thermal diffusivities (χi) in DIII-D [J. L. Luxon and L. G. Davis, Fusion Technol. 8, 441 (1985)] discharges exhibit a strong nonlinear dependence on the measured temperature gradients. In low confinement mode (L-mode) discharges with low toroidal rotation, the ion thermal diffusivity, χi, has an approximately Heaviside function dependence on the major radius divided by the radial scale length of the ion temperature, R/LTi. When R/LTi is less than a critical value, the χi's are very small. When R/LTi is about equal to the critical value, χi increases rapidly. Although the gradient profiles for high confinement (H-mode) have a different shape, they still show a critical gradient type of behavior. This type of dependence is consistent with the predictions for transport, which is dominated by ion temperature gradient modes and is a strong indicator that these modes are the main contributors toward L-mode transport in DIII-D and a major contributor to transport in a certain region of DIII-D H-mode discharges. When strong rotational shear is present, the thermal confinement is improved in regions of the plasma. In these regions, the dependence of the diffusivities on the gradients is changed. The type of change is consistent with the physical picture that when the E×B shearing frequency is greater than the maximum linear growth rate of the modes as calculated without shear, then the modes are stabilized and the transport is reduced. © 2001 American Institute of Physics.

Notizen: In this article we investigate the partial closure of diagnostic holes in Z-pinch driven hohlraums. These hohlraums differ from current laser-driven hohlraums in a number of ways such as their larger size, greater x-ray drive energy, and lower temperature. Although the diameter of the diagnostic holes on these Z-pinch driven hohlraums can be much greater than their laser-driven counterparts, 4 mm in diameter or larger, radiation impinges on the wall material surrounding the hole for the duration of the Z pinch, nearly 100 ns. This incident radiation causes plasma to ablate from the hohlraum walls surrounding the diagnostic hole and partially obscure this diagnostic hole. This partial obscuration reduces the effective area over which diagnostics view the hohlraum's radiation. This reduction in area can lead to an underestimation of the wall temperature when nonimaging diagnostics such as x-ray diodes and bolometers are used to determine power and later to infer a wall temperature. In this article we describe the techniques used to characterize the hole-closure in these hohlraums and present the experimental measurements of this process. © 2000 American Institute of Physics.

Notizen: The magnetic properties of Fe nanostructured films have been studied using magnetic linear and circular dichroism in x-ray photoemission spectroscopy. The samples were prepared by the deposition of nanoscale Fe clusters, size 1–4 nm, onto thin Cu films. The linear dichroism, which is used to measure the in-plane magnetization, increases with increasing film thickness, with a sharp increase between 1 and 1.5 ML coverage. The circular dichroism, which measures the out-of-plane magnetization, is zero within the experimental error at all thicknesses studied. Capping an Fe film with an ultrathin Pd layer results in a factor of 3 decrease of the linear dichroism response. © 2000 American Institute of Physics.

Notizen: The design and operation of a gas aggregation source is described. The source combines the attributes of high-temperature operation (enabling preparation of transition metal clusters), mass selection, ultrahigh vacuum compatibility, and transportability. This makes it ideally suited to in situ studies such as scanning tunneling microscope or synchrotron radiation experiments. Data are presented to illustrate the performance of the source; recent results obtained in synchrotron radiation studies are highlighted. © 2000 American Institute of Physics.

Notizen: The design, construction and operation of a tomographic imaging system on the Compact Toroid Injection Experiment is described. The system measures the total radiated power over energies from visible light up into the extreme ultraviolet. It then reconstructs two dimensional profiles from the data. The reconstruction routine is based on a method known as second order regularization which finds a compromise between smoothness and fit to the data. This method was found to have the best overall fidelity to test images. The hardware and overall reconstruction were calibrated using two different sources. First results from the system under real experimental conditions are presented. © 2000 American Institute of Physics.

Notizen: The object of this study was to determine the effect of closing date and date of harvest for conservation (accumulation period), on dry-matter (DM) yield and forage quality of annual pasture in Western Australia. The field study comprised 48 plots, 2 m × 2 m, sown with either annual ryegrass (Lolium rigidum Gaud.) or Italian ryegrass (L. multiflorum Lam.), and mixed with subterranean clover (Trifolium subterraneum L.). Defoliation of swards until the end of winter was at the three leaves tiller–1 stage. In spring, once stem nodal development had commenced, swards were defoliated every 3–4 weeks. Swards were defoliated either twice with three leaves tiller–1 (accumulation period 1 commenced on 15 August); twice with three leaves tiller–1 and then once after 4 weeks (accumulation period 2 commenced on 11 September); twice with three leaves tiller–1 and then twice after 4-week intervals (accumulation period 3 commenced on 9 October) or; twice with 3 leaves tiller–1 and then twice after 4-week intervals and then once after 3 weeks (accumulation period 4 commenced on 30 October). From the commencement of the accumulation period, tiller density, DM yield and forage quality were determined weekly for up to 10 weeks.There was a positive quadratic association between DM yield and days after the commencement of the accumulation period. Yields were maximized from accumulation period 1 with 5·3, 6·6 and 9·5 t DM ha–1, and growth rates were 140, 128 and 145 kg DM ha–1 d–1, for Wimmera annual ryegrass and Richmond and Concord cultivars of Italian ryegrass respectively. In contrast, in vitro dry-matter digestibility (IVDMD) and crude protein (CP) content were negatively associated with days after the commencement of the accumulation period, and initial values were greater than 0·80 and 180 g kg DM–1 for IVDMD and CP content respectively. The rate of decline in IVDMD d–1 for Wimmera annual ryegrass was 0·005, 0·019 and 0·012 d–1 for accumulation periods 1, 2 and 3, respectively, while for Italian ryegrass cultivars Richmond was 0·015, 0·011, 0·02 and 0·012 d–1 and Concord was 0·014, 0·009, 0·013 and 0·01 d–1, for the 4 accumulation periods respectively.It is recommended that annual and Italian ryegrass pastures be harvested between 10% and 20% inflorescence emergence when IVDMD will exceed 0·70 regardless of cultivar and/or defoliation practice prior to the commencement of the accumulation period.

Notizen: The effect of defoliation on the vegetative, early reproductive and inflorescence stages of tiller development, changes in the dry-matter yield of leaf, stem and inflorescence and the associated changes in forage quality was determined on plants of annual ryegrass (Lolium rigidum Gaud.) and Italian ryegrass (L. multiflorum Lam.). The field study comprised seventy-two plots of 1 m × 2 m, sown with one annual ryegrass and seven Italian ryegrass cultivars with a range of heading dates from early to late; defoliation commenced 6 weeks after germination. During the vegetative stage of growth, plots were defoliated when the tillers had three fully expanded leaves (three-leaf stage). During the early reproductive stage of growth, to simulate a cut for silage, plots were defoliated 6–7 weeks after 0·10 of the tillers displayed nodal development. The subsequent regrowth was defoliated every 3 weeks.Assessments of changes in tiller density, yield and quality were made in the growth cycle that followed three contrasting cutting treatments during the winter–spring period (from 10 July). In treatment 1, this growth cycle (following closing-up before a subsequent conservation cut) commenced on 7 August following two defoliations each taken when the tillers were at the three-leaf stage. In treatment 2, the growth cycle commenced on 16 October following: for early-maturing cultivars, two cuts at the three-leaf stage, a cut for silage and an additional regrowth cut; for medium-maturing cultivars three cuts at the three-leaf stage and a cut for silage; and late-maturing cultivars, five cuts at the three-leaf stage. In treatment 3, defoliation up to 16 October was as for treatment 2, but the growth cycle studied started on 27 November following two additional regrowth cuts for early- and medium-maturing cultivars and cut for silage for the late-maturing cultivars.Tiller development for all cultivars was classified into three stages; vegetative, early reproductive and inflorescence. In treatment 1, in vitro dry-matter digestibility (IVDMD) and crude protein (CP) content were negatively associated with maturation of tillers. IVDMD ranged from 0·85 to 0·60 and CP ranged from 200 to less than 100 g kg–1 dry matter (DM) during the vegetative and inflorescence stages respectively. This large reduction in forage quality was due to an increase in the proportion of stem, inflorescence and dead material, combined with a reduction in the IVDMD and CP content of the stem. A high level of forage quality was retained for longer with later-maturing cultivars, and/or when vegetative tillers were initiated from the defoliation of early reproductive tillers (treatments 2 and 3). However, 15 weeks after the closing-up date in treatment 1, defoliation significantly reduced the density of inflorescences with means (±pooled s.e_m.) of 1560, 1178 and 299 ± 108 tillers m–2, and DM yield of inflorescence with means of 3·0, 0·6 and 0·1 ± 0·15 t ha–1 for treatments 1, 2 and 3 respectively.This study supports the recommendation that annual and Italian ryegrass cultivars should be classified according to maturity date based on the onset of inflorescence emergence, and that the judicious defoliation of early reproductive tillers can be used to promote the initiation of new vegetative tillers which in turn will retain forage quality for longer.

Notizen: The development of a nearly defect-free reticle blank is an important challenge facing extreme ultraviolet lithography (EUVL). The core element of an EUVL reticle blank is the reflective Mo/Si multilayer film, and deposition of Mo/Si on very small substrate defects can result in critical Mo/Si phase defects. In this article we present a method for repairing Mo/Si multilayer film phase defects in EUVL reticle blanks. An electron beam is used to deposit energy in the immediate vicinity of the defect, producing a small local contraction of the layer thicknesses due to silicide formation at the Mo/Si interfaces. We show in simulations that this contraction can significantly reduce the original structural deformation. We also present experimental results showing that it is possible to use an electron beam to controllably produce depressions in Mo/Si with nanometer-scale depths, and that this can be achieved without significantly impairing the reflective properties of the Mo/Si multilayer films. © 2002 American Institute of Physics.