ALBERT

Description: Tajikistan is often affected by atmospheric mineral dust. The direct and indirect radiative effects of dust play a sensitive role in the climate system in Central Asia. The Central Asian Dust Experiment (CADEX) provides first lidar measurements in Tajikistan. The autonomous multiwavelength polarization Raman lidar PollyXT was operated for 1.5 years (2015/16) in Dushanbe. In spring, lofted layers of long-range transported dust and in summer/ autumn, lower laying dust from local or regional sources with large optical thicknesses occurred.

Description: For the first time, continuous vertically resolved aerosol measurements were performed by lidar in Tajikistan, Central Asia. Observations with the multiwavelength polarization Raman lidar PollyXT were conducted during CADEX (Central Asian Dust EXperiment) in Dushanbe, Tajikistan, from March 2015 to August 2016. Co-located with the lidar, a sun photometer was also operated. The goal of CADEX is to provide an unprecedented data set on vertically resolved aerosol optical properties in Central Asia, an area highly affected by climate change but largely missing vertically resolved aerosol measurements. During the 18-month measurement campaign, mineral dust was detected frequently from ground to the cirrus level height. In this study, an overview of the measurement period is given and four typical but different example measurement cases are discussed in detail. Three of them are dust cases and one is a contrasting pollution aerosol case. Vertical profiles of the measured optical properties and the calculated dust and non-dust mass concentrations are presented. Dust source regions were identified by means of backward trajectory analyses. A lofted layer of Middle Eastern dust with an aerosol optical thickness (AOT) of 0.4 and an extinction-related Ångström exponent of 0.41 was measured. In comparison, two near-ground dust cases have Central Asian sources. One is an extreme dust event with an AOT of 1.5 and Ångström exponent of 0.12 and the other one is a most extreme dust event with an AOT of above 4 (measured by sun photometer) and an Ångström exponent of −0.08. The observed lidar ratios (and particle linear depolarization ratios) in the presented dust cases range from 40.3 to 46.9 sr (and 0.18–0.29) at 355 nm and from 35.7 to 42.9 sr (0.31–0.35) at 532 nm wavelength. The particle linear depolarization ratios indicate almost unpolluted dust in the case of a lofted dust layer and pure dust in the near-ground dust cases. The lidar ratio values are lower than typical lidar ratio values for Saharan dust (50–60 sr) and comparable to Middle Eastern or west-Asian dust lidar ratios (35–45 sr). In contrast, the presented case of pollution aerosol of local origin has an Ångström exponent of 2.07 and a lidar ratio (particle linear depolarization ratio) of 55.8 sr (0.03) at 355 nm and 32.8 sr (0.08) at 532 nm wavelength.

Description: The interdisciplinary project “Integrity of nuclear waste repository systems – Cross-scale system understanding and analysis (iCROSS)” combines research competencies of Helmholtz scientists related to the topics of nuclear, geosciences, biosciences and environmental simulations in collaborations overarching the research fields energy and earth and environment. The focus is to understand and analyze close-to-real long-term evolutionary pathways of radioactive waste repositories across nanoscales to repository scales. The project is subdivided into work packages dealing with laboratory studies, field experiments in underground research laboratories (URLs), advanced modelling studies and the integration and alignment of data and information using virtual reality methods. In this sense, the project structure aims at a holistic view on relevant processes across scales in order to comprehensively simulate potential repository evolutions. Within the multi-barrier system of a repository for heat-generating radioactive waste, a number of complex reactions proceed, including dissolution, redox processes, biochemical reactions, gas evolution and solid/liquid interface and (co)precipitation reactions. At the same time, thermal and external mechanical stress has an impact on the conditions in a deep geological repository. All those processes are highly coupled, with multiple interdependencies on various scales and have a strong impact on radionuclide mobility and retention. In recent years, substantial progress was achieved in describing coupled thermal-hydro-mechanical-chemical-biological (THM/CB) processes in numerical simulations. A realistic and concise description of these coupled processes on different time and spatial scales is, at present, a largely unresolved scientific and computational challenge. The close interaction of experimental and simulation teams aims at a more accurate quantification and assessment of processes and thus, the reduction of uncertainties and of conservative assumptions and eventually to a close-to-real perception of the repository evolution. One focus of iCROSS is directed to relevant processes in a clay rock repository. In this context, the iCROSS team became a full member of the international Mont Terri consortium and worked in close collaboration with international and German institutions in URL projects. Respective experiments specifically deal with coupled processes at the reactive interfaces in a repository near field (e.g. the steel/bentonite and bentonite/concrete interfaces). Within iCROSS, the impact of secondary phase formation on radionuclide transport is investigated. At Mont Terri, experiments are in preparation to study radionuclide transport phenomena in clay rock formations within temperature gradients and in facies exhibiting significant heterogeneities on different scales (nm to cm). Beside those studies, high resolution exploration methods for rock characterization are developed and tested and the effect of temperature and other boundary conditions on the strength, creep properties and healing of faults within Opalinus clay are quantified. Multiphysics models coupled to reactive transport simulation have been further developed and applied to laboratory and field experiments. Results are digitally analyzed and illustrated in a visualization center, in order to enhance the comprehension of coupled processes in repository systems across scales. The present contribution provides an overview on the project and reports selected results. The impact of considering complex coupled processes in repository subsystems for the assessment of the integrity of a given (generic) repository arrangement is discussed.

Description: The Norwegian Water Resources and Energy Directorate (NVE) operates the Norwegian Snow Avalanche, Lake Ice, Landslide, and Flood Warning Services and has been using Copernicus satellite data since 2014 to improve these services, enhance safety management, and support research. The NVE Copernicus Services project, launched in 2022, aims to provide operational monitoring of snow avalanches, snow cover, lake ice, glaciers, floods, and other potential hazards using Sentinel data. In addition, the services make a baseline for future studies quantifying the climatic effects on snow avalanches, snow, and glaciers.New neural network-based detection algorithms have been implemented to improve monitoring of snow avalanches and snow cover. In addition, the project seeks to enhance monitoring of glacier lake outburst floods, snow and firn lines on glaciers, lake ice phenology, and flooded areas among others. The project also explores new applications for the Copernicus data, such as mapping and monitoring landslides and slushflows and using soil moisture data for hydrological models. Furthermore, the project investigates the potential use of Sentinel data for energy purposes. To ensure the efficient and safe delivery of these services, the project focuses on upgrading the IT infrastructure at NVE. The project not only generates new products from satellite data but also combines satellite data with modelled data and will use in situ data from the "Varsom" mobile app for validation. Visualization of products derived from optical and radar satellite images will be published in NVEs warning and preparedness tools xGeo and seNorge, among others.