ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
The Protection of Steel Constructional Work from CorrosionDependence of the formation of rust on climate, presence of electrolytes and the type of steel used - Mill scale diminishes the life of protective coatings and should therefore be removed - Chipping and other manual methods of scale removal are usually insufficient and should not be used on new constructional work - Sand blasting with coarse sand leaves points on the surface of the metal which facilitate the formation of rust, hence, only relatively fine sand should be used for this purpose - Flame descaling with a primer applied to the warm surface is advantageous - Removal or conversion of rust by chemical means has not proved successful in the case of steel constructional work - Wash primer and spray galvanizing - Effect of moisture and the chemical action of the ambient atmosphere on the application of protective coatings - Importance of the thickness of the film of the coating - Summary of the more important binders for use with anti-corrosive paints (oil binders, linseed varnish, hot linseed oil, wood oil) - Action and effect of pigments - Red lead and lead - cyanamide primary colours - Alkyd resin paints and oil-alkyd paints - Chlorinated rubber paints, chlorinated rubber-oil combinations and chlorinated rubber-alkyd combinations - Bituminous anti-corrosive paints on primers of asphalt, bituminous and coal tar pitch - Tar pitch emulsions - Suggestions for the choice of suitable anti-corrosive paints.
Notes:
Abhängigkeit der Rostbildung vom Klima, der Anwesenheit von Elektrolyten und der Art des Eisens - Walzzunder verringert die Haltbarkeit von Schutzanstrichen und sollte entfernt werden - Handentrostung ist meist unzureichend und sollte bei Neukonstruktionen nicht angewandt werden. - Grobe Sandstrahlung hinterlässt Spitzen, welche Ansatz zur Rostbildung geben, deshalb relativ fein strahlen - Flammentrostung in Verbindung mit Grundanstrich auf noch warme Eisen ist vorteilhaft - Chemische Entrostung und Rostumwandlung bei Stahlbauten nicht bewährt - Washprimer und Spritzverzinkung - Wirkung der Feuchtigkeit und aggressiver Atmosphäre bei der Ausführung von Anstrichen - Bedeutung der Filmdicke - Schema der wichtigsten Bindemittel für Rostschutzfarben - Die Ölbindemittel, Leinöfirnis, Standöl, Holzöl - Art und Wirkung der Pigmente - Bleimennige und Bleicyanamidgrundfarben - Alkydharzfarben und Öl-Alkyd-Kombindationsfarben - Chlorkautschukfarben, Chlorkautschuk-Öl-Kombinationen und Chlorkautschuk-Alkyd-Kombinationen - Bituminöse Rostschutzfarben auf der Grundlage von Asphalt - Bitumen und Steinkohlenteerpech - Teerpech-Emulsionen - Vorschläge fü die Wahl der je nach Anwendungsgebiet geeigneten Rostschutzfarben.
Additional Material:
15 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19540051105