ALBERT

Beschreibung: Microwave radar and radiometer measurements of grasslands indicate a substantial reduction in sensor sensitivity to soil moisture in the presence of a thatch layer. When this layer is wet it masks changes in the underlying soil, making the canopy appear warm in the case of passive sensors (radiometer) and decreasing backscatter in the active case (scatterometer). A model for a grass canopy with thatch will be presented in this paper to explain this behavior and to compare with observations. The canopy model consists of three layers: grass, thatch, and the underlying soil. The grass blades are modeled by elongated elliptical discs and the thatch is modeled as a collection of disk shaped water droplets (i.e., the dry matter is neglected). The ground is homogeneous and flat. The distorted Born approximation is used to compute the radar cross section of this three layer canopy and the emissivity is computed from the radar cross section using the Peake formulation for the passive problem. Results are computed at L-band (1.4 GHz) and C-band (4.75 GHz) using canopy parameters (i.e., plant geometry, soil moisture, plant moisture, etc.) representative of Konza Prairie grasslands. The results are compared to C-band scatterometer measurements and L-band radiometer measurements at these grasslands.

Beschreibung: We develop a new technique for extracting three-dimensional information from multiday solar Very Large Array (VLA) observations. While standard stereoscopic methods provide a three-dimensional view of an object by combining simultaneous observations from two different aspect angles, we relax the condition of simultaneity and exploit solar rotation to vary the aspect angle. The solar radio images are decomposed into Gaussian source components, which are then cross-correlated in maps from preceding and following days. This provides measurements of the three-dimensional position of correlated source centroids. In this first paper, we describe the stereoscopic method and perform tests with simulated and real radio maps (from the VLA at 20 cm), in order to study the accuracy of altitude measurements, and the limitations introduced by (i) source confusion, (ii) source motion, and (iii) the assumed differential rotation rate. The tests demonstrate that (i) the information content of a VLA map relevant for stereoscopic correlation can be conveniently represented in terms of a small number of Gaussian components; (ii) the fitting of the three-dimensional source position is stable within a numerical accuracy of less than or approximately equal to 0.02 map pixels, (iii) the relative accuracy of the altitude determination is uniform over the solar disk, and (iv) source confusion does not affect the accuracy of stereoscopic position measurements for sources with a signal-to-noise ratio of greater than or approximately equal to 36.

Beschreibung: We have obtained 3.2-3.6 micron spectra, with a resolution lambda/delta-lambda approximately 750, of the protostar Mon R2/IRS-3 and of Elias 16, a background K giant behind the Taurus molecular cloud. A feature at 3,482 microns (2872/cm), with a full width at half-maximum of 0.09 microns (76/cm), is clearly seen in Mon R2/IRS-3. This feature is not detected in Elias 16. The 3.482 micron feature in Mon R2/IRS-3 is similar to a feature at 3.466-3.478 microns (2875-2885/cm) detected by Allamandola et al. in four protostars and attributed by these authors to a CH stretch in hydrocarbons dominated by sp3-bonded carbon. Neither Mon R2/IRS-3 nor Elias 16 shows absorption at 3.540 microns (2825/cm), which has been detected in two of the four protostars observed by Allamandola et al. and attributed by them to CH3OH ice. Our limit on CH3OH ice toward Elias 16 is compared to models of gas-grain chemistry in dark clouds. Our results confirm those of Allamandola et al. that at this resolution the 3.4 micron absorption due to dust in molecular clouds has very different spectral structure than that due to dust in the diffuse interstellar medium.

Beschreibung: ASCA observations of the gravitational lens and Butcher-Oemler cluster Abell 370 (z = 0.37) give kT = 8.8 +/- 0.8 keV and A = 0.5 +/- 0.1 cosmic. If the gas were isothermal the implied cluster mass would be M(sub vir) = (1.5 +/- 0.4) x 10(exp 15) solar masses, a value consistent with the optically-determined virial mass. We detect iron K line emission with high confidence. This measurement increases, by a large factor, the lookback time at which the presence of iron in the intracluster medium has been established. The iron abundance is marginally higher than that of low-redshift clusters of similar temperature, so our results are consistent with models in which all enrichment occurs before the epoch corresponding to z = 0.37.

Beschreibung: We have conducted timing observations of the eclipsing millisecond binary pulsar PSR B1957+20, extending the span of data on this pulsar to more than five years. During this time the orbital period of the system has varied by roughly Delta P(sub b)/P(sub b) = 1.6 x 10(exp -7), changing quardratically with time and displaying with time and displaying an orbital period second derivative of P(sub b) = (1.43 +/- 0.08) x 10(exp -18)/sec. The previous measurement of a large negative orbital period derivative reflected only the short-term behavior of the system during the early observations; the orbital period derivative is now positive. If, as we suspect, the PSR B1957+20 system is undergoing quasi-cyclic orbital period variations similar to those found in other close binaries such as Algol and RS CVn, then the 0.025 solar mass companion to PSR B1957+20 is most likely non-degenerate, convective, and magnetically active.

Beschreibung: This Letter describes the results of an initial study of Galactic extinction and the colors of Galactic stellar populations in the near-IR using the Diffuse Infrared Background Experiment (DIRBE) aboard the Cosmic Background Explorer (COBE) spacecraft. The near-IR reddening observed by DIRBE is consistent with the extinction law tabulated by Rieke & Lebofsky (1985). The distribution of dust and stars in most of the first and fourth quadrants of the Galactic plane (0 deg less than l less than 90 deg, and 270 deg less than l less than 360 deg, respectively) can be modeled as a stellar background source seen through up to approximately 4 mag of extinction at 1.25 micrometers. The unreddened near-IR colors of the Galactic disk are similar to those of late-K and M giants. The Galactic bulge exhibits slightly bluer colors in the 2.2-3.5 micrometers range, as noted by Terndrup et al. (1991). Star-forming regions exhibit colors that indicate the presence of a approximately 900 K continuum produced by hot dust or polycyclic aromatic hydrocarbons (PAHs) contributing at wavelengths as short as 3.5 micrometers.

Beschreibung: An Advanced Satellite for Cosmology and Astrophysics (ASCA) observation of Cygnus X-3 on 1993 June 11, in its X-ray high intensity state, has for the first time resolved the broad iron K line emission into three components: a He-like line at 6.67 +/- 0.01 keV, a H-like line at 6.96 +/- 0.02 keV, and a neutral line at 6.37 +/- 0.03 keV. The line intensities of the 6.67 keV and 6.96 keV lines are modulated with the 4.8 hr orbital period and are maximum when the continuum intensity is minimum. There is a sharp minimum of the line intensity on the rising phase of the continuum intensity. An iron absorption edge is observed at 7.19 +/- 0.02 keV. The optical depth of the absorption edge varies from 0.3 to 0.5 and is in anti-phase with the overall X-ray continuum modulation. The observed complexity of the iron K line region is greater than that had been assumed in previous spectral modeling based on observations with lower resolution detectors.

Beschreibung: We have observed the intermediate polar EX Hya with Advanced Satellite for Cosmology and Astrophysics (ASCA), and have clearly detected He-like and H-like K alpha emission lines from Mg to Fe. The intensity ratios of these pairs of lines are not compatible with an isothermal plasma, and a temperature distribution can no longer be parameterized by the conventional two emission component model. We have successfully decomposed iron line emission into thermal plasma component and flourescent component. The equivalent width of the flourescent component is approximately 80 eV.

Beschreibung: With the high sensitivity and spectral resolution of the Advanced Satellite for Cosmology and Astrophysics (ASCA) satellite, we have discovered strong emission lines from the H-like and/or He-like ions of Ne, Mg, Si, and S as well as Fe L and confirmed the complex structure of Fe K line emission in the Seyfert II galaxy NGC 1068. The continuum emission above 3 keV exhibits rather flat shape with no evidence of low energy absorption. The overall X-ray spectrum can be well explained with a model involving starburst activity plus an obscured active galactic nucleus.

Beschreibung: The symbiotic star EG Andromedae has recently been the subject of several studies investigating its wind properties. Late-type giants are usually considered to have winds driven by radiation pressure on dust. Indeed, the derived wind velocity for EG Andromedae is consistent with this model. We point out here that there is no appreciable dust opacity in the wind of EG Andromedae using constraints on extinction limits from International Ultraviolet Explorer (IUE) and far infrared fluxes from Infrared Astronomy Satellite (IRAS). An alternate mechanism must operate in this star. We suggest that the wind can be driven by radiation pressure on molecular lines.

Beschreibung: This atlas contains sample spectra from the far-ultraviolet observations of 32 symbiotic stars obtained with the International Ultraviolet Explorer (IUE) satellite. In all, 394 low-resolution spectra from the short-wavelength primary (SWP) camera covering the range 1200-2000 A have been extracted from the IUE archive, calibrated, and measured. Absolute line fluxes and wavelengths for the prominent emission lines have been tabulated. Tables of both the general properties of these symbiotics and of features specific to the spectrum of each are included. The spectra shown are representative of the different classes of symbiotic stars that are currently in the IUE archive. These include known eclipsing systems and those that have been observed in outburst (as well as quiescence).

Beschreibung: The displacement of a radio-emitting star around the barycenter of a possible planetary system can be measured by astrometric very long baseline interferometry (VLBI) observations. We have observed the radio-emitting star sigma(sup 2) CrB at 8 epochs over 5 years by VLBI and fitted its 5 astrometric parameters to the observed coordinates. The post-fit coordinate residuals have and rms scatter of 0.22 milliarcseconds and show no systematic behavior. We use this result to set a limit on the presence of planets around sigma(sup 2) CrB and conclude that our present VLBI astrometric precision corresponds to the threshold to detect a Jupiter-like planet around this star. We also discuss the astrometric monitoring program of 11 radio-emitting stars that we are conducting for the Hipparcos space mission and its possible contribution to a long-term planet search program.

Beschreibung: We investigate the question of disk formation during the protostar phase. We build on the results of Keene and Masson (1990) whose analysis of L1551 showed the millimeter continuum emission comes from both an unresolved circumstellar component, i.e., a disk and an extended cloud core. We model the dust continuum emission from the cloud core and show how it is important at 1.3 mm but negligible at 2.7 mm. Combining new 2.7 mm Owens Valley Interferometer data of IRAS-Dense cores with data from the literature we conclude that massive disks are also seen toward a number of other sources. However, 1.3 mm data from the IRAM 30 m telescope for a larger sample shows that massive disks are relatively rare, occurring around perhaps 5% of young embedded stars. This implies that either massive disks occur briefly during the embedded phase or that relatively few young stars form massive disks. At 1.3 mm the median flux of IRAS-Dense cores is nearly the same as T Tauri stars in the sample of Beckwith et al. (1990). We conclude that the typical disk mass during the embedded phase is nearly the same or less than the typical disk mass during the T Tauri phase.

Beschreibung: The accomplishments of the Space Shuttle Endeavor's mission to repair the Hubble Space Telescope (HST) are discussed. Images are presented that were taken with the HST Faint Object Camera before and after the installation of the Corrective Optics Space Telescope and Axial Replacement. Images are also presented that were taken with the old Wide Field and Planetary Camera (WFPC) and its replacement, WFPC 2. Comparisons between before-repair and after-repair images clearly indicate that the mission was a success.

Beschreibung: There have been many significant improvements in the public access to the Space Shuttle Earth Observations Photography Database. New information is provided for the user community on the recently released videodisc of this database. Topics covered included the following: earlier attempts; our first laser videodisc in 1992; the new laser videodisc in 1994; and electronic database access.

Beschreibung: This paper presents the results of the correlation analysis of the Skylab S-193 13.9 GHz Radiometer/Scatterometer data. Computer analysis of the S-193 data shows more than 50 percent of the radiometer and scatterometer data are uncorrelated. The correlation coefficients computed for the data gathered over various ground scenes indicates the desirability of using both active and passive sensors for the determination of various Earth phenomena.

Beschreibung: The Challenge Awards are designed to provide a unique perspective to students gifted in the arts and humanities from which to understand scientific endeavor by giving students an opportunity to participate in an ongoing research project. In the graduate program, seven students who had participated in previous Challenge Awards programs were selected to help develop the tools for Earth observations for the astronauts on the Space Radar Laboratory (SRL) missions. The goal of the Challenge Awards program was to prepare a training manual for the astronauts on the SRL missions. This paper describes the observations to be made by the astronauts on the SRL missions. The emphasis is on the dynamic seasonal features of the Earth's surface and atmosphere which justify the need for more than one flight of the SRL. Complete notebooks of the sites, global seasonal patterns, examples of radar and the Measurement of Air Pollution from Satellites data, and shuttle photographs have been given to each of the SRL crews.

Beschreibung: We have analyzed two data sets of Jupiter's limb darkening taken before (March 1990) and after (March 1991) a South Equatorial Belt (SEB) disturbance. The vertical aerosol structure has been determined for the SEB, the Equatorial Zone (EZ), and the North Equatorial Belt (NEB). We find that all regions can be well represented with a two-cloud layer model, with slightly higher NH3-cloud top altitude in the EZ than in the two belts. The cloud single-scattering albedos tilda-omega(sub cl) (determined within plus or minus 0.003) show little difference in the EZ (from 0.9956 to 0.9952) and the NEB (from 0.9925 to 0.9926) during a 1-year period, while a relatively larger decrease is found in the SEB from 0.9975 to 0.9957, indicating the recovery of the belt through the disturbance. The NH3-cloud top altitude in the SEB shows the most prominent change, lower in 1990 and higher in 1991. We suggest that the brightening and the darkening of the SEB may originate not only from the changes of tilda-omega(sub cl) but also from changes of the ammonia condensation level in the atmosphere, probably due to a decrease of the tropospheric temperature and/or an increase of the ammonia vapor.

Beschreibung: MacSigma0 is an interactive tool for the Macintosh which allows you to display and make computations from radar data collected by the following sensors: the JPL AIRSAR, ERS-1, JERS-1, and Magellan. The JPL AIRSAR system is a multi-polarimetric airborne synthetic aperture radar developed and operated by the Jet Propulsion Laboratory. It includes the single-frequency L-band sensor mounted on the NASA CV990 aircraft and its replacement, the multi-frequency P-, L-, and C-band sensors mounted on the NASA DC-8. MacSigma0 works with data in the standard JPL AIRSAR output product format, the compressed Stokes matrix format. ERS-1 and JERS-1 are single-frequency, single-polarization spaceborne synthetic aperture radars launched by the European Space Agency and NASDA respectively. To be usable by MacSigma0, The data must have been processed at the Alaska SAR Facility and must be in the "low-resolution" format. Magellan is a spacecraft mission to map the surface of Venus with imaging radar. The project is managed by the Jet Propulsion Laboratory. The spacecraft carries a single-frequency, single-polarization synthetic aperture radar. MacSigma0 works with framelets of the standard MIDR CD-ROM data products. MacSigma0 provides four basic functions: synthesis of images (if necessary), statistical analysis of selected areas, analysis of corner reflectors as a calibration measure (if appropriate and possible), and informative mouse tracking. For instance, the JPL AIRSAR data can be used to synthesize a variety of images such as a total power image. The total power image displays the sum of the polarized and unpolarized components of the backscatter for each pixel. Other images which can be synthesized are HH, HV, VV, RL, RR, HHVV*, HHHV*, HVVV*, HHVV* phase and correlation coefficient images. For the complex and phase images, phase is displayed using color and magnitude is displayed using intensity. MacSigma0 can also be used to compute statistics from within a selected area. The statistics computed depend on the image type. For JPL AIRSAR data, the HH, HV, VV, HHVV* phase, and correlation coefficient means and standard deviation measures are calculated. The mean, relative standard deviation, minimum, and maximum values are calculated for all other data types. A histogram of the selected area is also calculated and displayed. The selected area can be rectangular, linear, or polygonal in shape. The user is allowed to select multiple rectangular areas, but not multiple linear or polygonal areas. The statistics and histogram are displayed to the user and can either be printed or saved as a text file. MacSigma0 can also be used to analyze corner reflectors as a measure of the calibration for JPL AIRSAR, ERS-1, and JERS-1 data types. It computes a theoretical radar cross section and the actual radar cross section for a selected trihedral corner reflector. The theoretical cross section, measured cross section, their ratio in dBs, and other information are displayed to the user and can be saved into a text file. For ERS-1, JERS-1, and Magellan data, MacSigma0 simultaneously displays pixel location in data coordinates and in latitude, longitude coordinates. It also displays sigma0, the incidence angle (for Magellan data), the original pixel value (for Magellan data), and the noise power value (for ERS-1 and JERS-1 data). Grey scale computed images can be saved in a byte format (a headerless format which saves the image as a string of byte values) or a PICT format (a standard format readable by other image processing programs for the Macintosh). Images can also be printed. MacSigma0 is written in C-language for use on Macintosh series computers. The minimum configuration requirements for MacSigma0 are System 6.0, Finder 6.1, 1Mb of RAM, and at least a 4-bit color or grey-scale graphics display. MacSigma0 is also System 7 compatible. To compile the source code, Apple's Macintosh Programmers Workbench (MPW) 3.2 and the MPW C language compiler version 3.2 are required. The source code will not compile with a later version of the compiler; however, the compiled application which will run under the minimum hardware configuration is provided on the distribution medium. In addition, the distribution media includes an executable which runs significantly faster but requires a 68881 compatible math coprocessor and a 68020 compatible CPU. Since JPL AIRSAR data files can be very large, it is often desirable to reduce the size of a data file before transferring it to the Macintosh for use in MacSigma0. A small FORTRAN program which can be used for this purpose is included on the distribution media. MacSigma0 will print statistics on any output device which supports QuickDraw, and it will print images on any device which supports QuickDraw or PostScript. The standard distribution medium for MacSigma0 is a set of five 1.4Mb Macintosh format diskettes. This program was developed in 1992 and is a copyrighted work with all copyright vested in NASA. Version 4.2 of MacSigma0 was released in 1993.

Beschreibung: VICAR (Video Image Communication and Retrieval) is a general purpose image processing software system that has been under continuous development since the late 1960's. Originally intended for data from the NASA Jet Propulsion Laboratory's unmanned planetary spacecraft, VICAR is now used for a variety of other applications including biomedical image processing, cartography, earth resources, and geological exploration. The development of this newest version of VICAR emphasized a standardized, easily-understood user interface, a shield between the user and the host operating system, and a comprehensive array of image processing capabilities. Structurally, VICAR can be divided into roughly two parts; a suite of applications programs and an executive which serves as the interfaces between the applications, the operating system, and the user. There are several hundred applications programs ranging in function from interactive image editing, data compression/decompression, and map projection, to blemish, noise, and artifact removal, mosaic generation, and pattern recognition and location. An information management system designed specifically for handling image related data can merge image data with other types of data files. The user accesses these programs through the VICAR executive, which consists of a supervisor and a run-time library. From the viewpoint of the user and the applications programs, the executive is an environment that is independent of the operating system. VICAR does not replace the host computer's operating system; instead, it overlays the host resources. The core of the executive is the VICAR Supervisor, which is based on NASA Goddard Space Flight Center's Transportable Applications Executive (TAE). Various modifications and extensions have been made to optimize TAE for image processing applications, resulting in a user friendly environment. The rest of the executive consists of the VICAR Run-Time Library, which provides a set of subroutines (image I/O, label I/O, parameter I/O, etc.) to facilitate image processing and provide the fastest I/O possible while maintaining a wide variety of capabilities. The run-time library also includes the Virtual Raster Display Interface (VRDI) which allows display oriented applications programs to be written for a variety of display devices using a set of common routines. (A display device can be any frame-buffer type device which is attached to the host computer and has memory planes for the display and manipulation of images. A display device may have any number of separate 8-bit image memory planes (IMPs), a graphics overlay plane, pseudo-color capabilities, hardware zoom and pan, and other features). The VRDI supports the following display devices: VICOM (Gould/Deanza) IP8500, RAMTEK RM-9465, ADAGE (Ikonas) IK3000 and the International Imaging Systems IVAS. VRDI's purpose is to provide a uniform operating environment not only for an application programmer, but for the user as well. The programmer is able to write programs without being concerned with the specifics of the device for which the application is intended. The VICAR Interactive Display Subsystem (VIDS) is a collection of utilities for easy interactive display and manipulation of images on a display device. VIDS has characteristics of both the executive and an application program, and offers a wide menu of image manipulation options. VIDS uses the VRDI to communicate with display devices. The first step in using VIDS to analyze and enhance an image (one simple example of VICAR's numerous capabilities) is to examine the histogram of the image. The histogram is a plot of frequency of occurrence for each pixel value (0 - 255) loaded in the image plane. If, for example, the histogram shows that there are no pixel values below 64 or above 192, the histogram can be "stretched" so that the value of 64 is mapped to zero and 192 is mapped to 255. Now the user can use the full dynamic range of the display device to display the data and better see its contents. Another example of a VIDS procedure is the JMOVIE command, which allows the user to run animations interactively on the display device. JMOVIE uses the concept of "frames", which are the individual frames which comprise the animation to be viewed. The user loads images into the frames after the size and number of frames has been selected. VICAR's source languages are primarily FORTRAN and C, with some VAX Assembler and array processor code. The VICAR run-time library is designed to work equally easily from either FORTRAN or C. The program was implemented on a DEC VAX series computer operating under VMS 4.7. The virtual memory required is 1.5MB. Approximately 180,000 blocks of storage are needed for the saveset. VICAR (version 2.3A/3G/13H) is a copyrighted work with all copyright vested in NASA and is available by license for a period of ten (10) years to approved licensees. This program was developed in 1989.

Beschreibung: The Interactive Image Display Program (IMDISP) is an interactive image display utility for the IBM Personal Computer (PC, XT and AT) and compatibles. Until recently, efforts to utilize small computer systems for display and analysis of scientific data have been hampered by the lack of sufficient data storage capacity to accomodate large image arrays. Most planetary images, for example, require nearly a megabyte of storage. The recent development of the "CDROM" (Compact Disk Read-Only Memory) storage technology makes possible the storage of up to 680 megabytes of data on a single 4.72-inch disk. IMDISP was developed for use with the CDROM storage system which is currently being evaluated by the Planetary Data System. The latest disks to be produced by the Planetary Data System are a set of three disks containing all of the images of Uranus acquired by the Voyager spacecraft. The images are in both compressed and uncompressed format. IMDISP can read the uncompressed images directly, but special software is provided to decompress the compressed images, which can not be processed directly. IMDISP can also display images stored on floppy or hard disks. A digital image is a picture converted to numerical form so that it can be stored and used in a computer. The image is divided into a matrix of small regions called picture elements, or pixels. The rows and columns of pixels are called "lines" and "samples", respectively. Each pixel has a numerical value, or DN (data number) value, quantifying the darkness or brightness of the image at that spot. In total, each pixel has an address (line number, sample number) and a DN value, which is all that the computer needs for processing. DISPLAY commands allow the IMDISP user to display all or part of an image at various positions on the display screen. The user may also zoom in and out from a point on the image defined by the cursor, and may pan around the image. To enable more or all of the original image to be displayed on the screen at once, the image can be "subsampled." For example, if the image were subsampled by a factor of 2, every other pixel from every other line would be displayed, starting from the upper left corner of the image. Any positive integer may be used for subsampling. The user may produce a histogram of an image file, which is a graph showing the number of pixels per DN value, or per range of DN values, for the entire image. IMDISP can also plot the DN value versus pixels along a line between two points on the image. The user can "stretch" or increase the contrast of an image by specifying low and high DN values; all pixels with values lower than the specified "low" will then become black, and all pixels higher than the specified "high" value will become white. Pixels between the low and high values will be evenly shaded between black and white. IMDISP is written in a modular form to make it easy to change it to work with different display devices or on other computers. The code can also be adapted for use in other application programs. There are device dependent image display modules, general image display subroutines, image I/O routines, and image label and command line parsing routines. The IMDISP system is written in C-language (94%) and Assembler (6%). It was implemented on an IBM PC with the MS DOS 3.21 operating system. IMDISP has a memory requirement of about 142k bytes. IMDISP was developed in 1989 and is a copyrighted work with all copyright vested in NASA. Additional planetary images can be obtained from the National Space Science Data Center at (301) 286-6695.

Beschreibung: PC-SEAPAK is a user-interactive satellite data analysis software package specifically developed for oceanographic research. The program is used to process and interpret data obtained from the Nimbus-7/Coastal Zone Color Scanner (CZCS), and the NOAA Advanced Very High Resolution Radiometer (AVHRR). PC-SEAPAK is a set of independent microcomputer-based image analysis programs that provide the user with a flexible, user-friendly, standardized interface, and facilitates relatively low-cost analysis of oceanographic satellite data. Version 4.0 includes 114 programs. PC-SEAPAK programs are organized into categories which include CZCS and AVHRR level-1 ingest, level-2 analyses, statistical analyses, data extraction, remapping to standard projections, graphics manipulation, image board memory manipulation, hardcopy output support and general utilities. Most programs allow user interaction through menu and command modes and also by the use of a mouse. Most programs also provide for ASCII file generation for further analysis in spreadsheets, graphics packages, etc. The CZCS scanning radiometer aboard the NIMBUS-7 satellite was designed to measure the concentration of photosynthetic pigments and their degradation products in the ocean. AVHRR data is used to compute sea surface temperatures and is supported for the NOAA 6, 7, 8, 9, 10, 11, and 12 satellites. The CZCS operated from November 1978 to June 1986. CZCS data may be obtained free of charge from the CZCS archive at NASA/Goddard Space Flight Center. AVHRR data may be purchased through NOAA's Satellite Data Service Division. Ordering information is included in the PC-SEAPAK documentation. Although PC-SEAPAK was developed on a COMPAQ Deskpro 386/20, it can be run on most 386-compatible computers with an AT bus, EGA controller, Intel 80387 coprocessor, and MS-DOS 3.3 or higher. A Matrox MVP-AT image board with appropriate monitor and cables is also required. Note that the authors have received some reports of incompatibilities between the MVP-AT image board and ZENITH computers. Also, the MVP-AT image board is not necessarily compatible with 486-based systems; users of 486-based systems should consult with Matrox about compatibility concerns. Other PC-SEAPAK requirements include a Microsoft mouse (serial version), 2Mb RAM, and 100Mb hard disk space. For data ingest and backup, 9-track tape, 8mm tape and optical disks are supported and recommended. PC-SEAPAK has been under development since 1988. Version 4.0 was updated in 1992, and is distributed without source code. It is available only as a set of 36 1.2Mb 5.25 inch IBM MS-DOS format diskettes. PC-SEAPAK is a copyrighted product with all copyright vested in the National Aeronautics and Space Administration. Phar Lap's DOS_Extender run-time version is integrated into several of the programs; therefore, the PC-SEAPAK programs may not be duplicated. Three of the distribution diskettes contain DOS_Extender files. One of the distribution diskettes contains Media Cybernetics' HALO88 font files, also licensed by NASA for dissemination but not duplication. IBM is a registered trademark of International Business Machines. MS-DOS is a registered trademark of Microsoft Corporation. HALO88 is a registered trademark of Media Cybernetics, but the product was discontinued in 1991.

Beschreibung: The Land Analysis System (LAS) is an image analysis system designed to manipulate and analyze digital data in raster format and provide the user with a wide spectrum of functions and statistical tools for analysis. LAS offers these features under VMS with optional image display capabilities for IVAS and other display devices as well as the X-Windows environment. LAS provides a flexible framework for algorithm development as well as for the processing and analysis of image data. Users may choose between mouse-driven commands or the traditional command line input mode. LAS functions include supervised and unsupervised image classification, film product generation, geometric registration, image repair, radiometric correction and image statistical analysis. Data files accepted by LAS include formats such as Multi-Spectral Scanner (MSS), Thematic Mapper (TM) and Advanced Very High Resolution Radiometer (AVHRR). The enhanced geometric registration package now includes both image to image and map to map transformations. The over 200 LAS functions fall into image processing scenario categories which include: arithmetic and logical functions, data transformations, fourier transforms, geometric registration, hard copy output, image restoration, intensity transformation, multispectral and statistical analysis, file transfer, tape profiling and file management among others. Internal improvements to the LAS code have eliminated the VAX VMS dependencies and improved overall system performance. The maximum LAS image size has been increased to 20,000 lines by 20,000 samples with a maximum of 256 bands per image. The catalog management system used in earlier versions of LAS has been replaced by a more streamlined and maintenance-free method of file management. This system is not dependent on VAX/VMS and relies on file naming conventions alone to allow the use of identical LAS file names on different operating systems. While the LAS code has been improved, the original capabilities of the system have been preserved. These include maintaining associated image history, session logging, and batch, asynchronous and interactive mode of operation. The LAS application programs are integrated under version 4.1 of an interface called the Transportable Applications Executive (TAE). TAE 4.1 has four modes of user interaction: menu, direct command, tutor (or help), and dynamic tutor. In addition TAE 4.1 allows the operation of LAS functions using mouse-driven commands under the TAE-Facelift environment provided with TAE 4.1. These modes of operation allow users, from the beginner to the expert, to exercise specific application options. LAS is written in C-language and FORTRAN 77 for use with DEC VAX computers running VMS with approximately 16Mb of physical memory. This program runs under TAE 4.1. Since TAE 4.1 is not a current version of TAE, TAE 4.1 is included within the LAS distribution. Approximately 130,000 blocks (65Mb) of disk storage space are necessary to store the source code and files generated by the installation procedure for LAS and 44,000 blocks (22Mb) of disk storage space are necessary for TAE 4.1 installation. The only other dependencies for LAS are the subroutine libraries for the specific display device(s) that will be used with LAS/DMS (e.g. X-Windows and/or IVAS). The standard distribution medium for LAS is a set of two 9~track 6250 BPI magnetic tapes in DEC VAX BACKUP format. It is also available on a set of two TK50 tape cartridges in DEC VAX BACKUP format. This program was developed in 1986 and last updated in 1992.

Beschreibung: Spaceborne Synthetic Aperture Radar (SAR) images are useful for planetary mapping and Earth sciences investigations. However, swath widths rarely exceed 100 Kilometers, and images must be patched together to create a mosaic in order to analyze larger areas. The primary function of this program is to generate large digital mosaics of SAR imagery without manually marked tiepoints. MOSK can produce multiframe mosaics by combining images in the along-track, adjacent cross-track swaths, or ascending and descending passes. Geocoded map registered images, such as the ones produced by MAPJTC (NPO-17718), are required as input. The output is a geocoded mosaic on a standard map grid which permits easy registration with other geocoded data sets. Mosaicking of geocoded SAR imagery involves three steps. First, a match point is selected at the center of the overlapping area, then an image patch around the match point is extracted from both images and cross-correlation is done on this area. Then, images with their refined match points are merged together to form a mosaic. To handle the large data volume of overlapping intermediate stages, large mosaics are divided into equal size quadrants with each quadrant cut from an intermediate mosaic. The full mosaic can then be assembled from the individual quadrants. Finally, radiometric disparities at the image seams are smoothed by a "feathering" technique. The automatic mosaic system generates output with minimal operator interaction. However, manual tiepointing is required in cases of a large registration error or two images with smooth surfaces such as ocean images. MOSK is implemented on a DEC VAX 11/785 running VMS 4.5. Most subroutines are in FORTRAN, but three are in MAXL and one is in APAL. The program requires 1 Mb of memory and a Floating Point Systems AP-5210 array processor. The system memory usage is approximately 1000 pages and the requirement of page file size is 2000 blocks. MOSK was developed in 1988.

Beschreibung: MAPJTC was designed to rectify and transform the standard image output of the digital Synthetic Aperture Radar (SAR) correlator into a geocoded map registered image without operator interaction or manual tiepointing. This is accomplished by modeling the distortions and predicting the pixel displacements based on platform and radar parameters. The map projection implemented in MAPJTC is the Universal Transverse Mercator. Since the re-sampling operation is independent of the transformation data generation, other cartographic projections can be implemented with few software modifications. MAPJTC makes a precise determination of the geodetic location of an arbitrary pixel within the image frame based on the simultaneous solution of a set of earth model equations, SAR Doppler equations, and SAR range equations that identify the slant range from the sensor to the target at a specific image pixel. Based on a table of geodetic coordinates of the image pixels, the image is then mapped onto the desired cartographic projection by applying the appropriate transformation equations. Typically, mapping involves a two-dimensional re-sampling and is very computationally intensive. MAPJTC reduces the procedure to two one-dimensional passes, which saves computer time. Geocoding transforms the rectified image into a grid defined by a specific map projection. (The image is rotated and rectified to match the map projection.) Again, the two dimensional re-sampling process can be separated into two one-dimensional re-sampling processes. Optionally, MAPJTC can correct terrain-induced distortions in SAR imagery when a digital elevation map is available. MAPJTC was developed on a DEC VAX 11/785 under VMS 4.5. The program is written in FORTRAN (84%), APAL (2%), and MAXL (14%). It requires 6Mb of memory and a Floating Point Systems AP-5210 Array Processor equipped with 1Mb of memory. MAPJTC can run interactively or as a batch job. MAPJTC was developed in 1987.

Beschreibung: The Multimission Interactive Picture Planner, MIP, is a scientifically accurate and fast, 3D animation program for deep space. MIP is also versatile, reasonably comprehensive, portable, and will run on microcomputers. New techniques were developed to rapidly perform the calculations and transformations necessary to animate scientifically accurate 3D space. At the same time, portability is maintained, as the transformations and clipping have been written in FORTRAN 77 code. MIP was primarily designed to handle Voyager, Galileo, and the Space Telescope. It can, however, be adapted to handle other missions. The space simulation consists of a rotating body (usually a planet), any natural satellites, a spacecraft, the sun, stars, descriptive labelling, and field of view boxes. The central body and natural satellites are tri-axial wireframe representations with terminators, limbs, and landmarks. Hidden lines are removed for the central body and natural satellites, but not for the scene as a whole so that bodies may be seen behind one another. The program has considerable flexibility in its step time, observer position, viewed object, field of view, etc. Most parameters may be changed from the keyboard while the simulation is running. When MIP is executed it will ask the user for a control file, which should be prepared before execution. The control file identifies which mission MIP should simulate, the star catalog files, the ephemerides files to be used, the central body, planets, asteroids, and comets, and solar system landmarks and constants such as planets, asteroids, and comets. The control file also describes the fields of view. Control files are included to simulate the Voyager 1 encounter at Jupiter and the Giotto spacecraft's flyby of Halley's comet. Data is included for Voyager 1 and 2 (all 6 planetary encounters) and Giotto. MIP was written for an IBM PC or compatibles. It requires 512K of RAM, a CGA or compatible graphics adapter, and DOS 2.0 or higher. Users must supply their own graphics primitives to clear the screen, change the color, and connect 2D points with straight lines. Also, the users must tie in the graphics primitives along with their ephemeris readers. (MIP does everything else including clipping.) MIP was developed in 1988.

Beschreibung: The Spectral Analysis Manager (SPAM) was developed to allow easy qualitative analysis of multi-dimensional imaging spectrometer data. Imaging spectrometers provide sufficient spectral sampling to define unique spectral signatures on a per pixel basis. Thus direct material identification becomes possible for geologic studies. SPAM provides a variety of capabilities for carrying out interactive analysis of the massive and complex datasets associated with multispectral remote sensing observations. In addition to normal image processing functions, SPAM provides multiple levels of on-line help, a flexible command interpretation, graceful error recovery, and a program structure which can be implemented in a variety of environments. SPAM was designed to be visually oriented and user friendly with the liberal employment of graphics for rapid and efficient exploratory analysis of imaging spectrometry data. SPAM provides functions to enable arithmetic manipulations of the data, such as normalization, linear mixing, band ratio discrimination, and low-pass filtering. SPAM can be used to examine the spectra of an individual pixel or the average spectra over a number of pixels. SPAM also supports image segmentation, fast spectral signature matching, spectral library usage, mixture analysis, and feature extraction. High speed spectral signature matching is performed by using a binary spectral encoding algorithm to separate and identify mineral components present in the scene. The same binary encoding allows automatic spectral clustering. Spectral data may be entered from a digitizing tablet, stored in a user library, compared to the master library containing mineral standards, and then displayed as a timesequence spectral movie. The output plots, histograms, and stretched histograms produced by SPAM can be sent to a lineprinter, stored as separate RGB disk files, or sent to a Quick Color Recorder. SPAM is written in C for interactive execution and is available for two different machine environments. There is a DEC VAX/VMS version with a central memory requirement of approximately 242K of 8 bit bytes and a machine independent UNIX 4.2 version. The display device currently supported is the Raster Technologies display processor. Other 512 x 512 resolution color display devices, such as De Anza, may be added with minor code modifications. This program was developed in 1986.

Beschreibung: The Spectral Analysis Manager (SPAM) was developed to allow easy qualitative analysis of multi-dimensional imaging spectrometer data. Imaging spectrometers provide sufficient spectral sampling to define unique spectral signatures on a per pixel basis. Thus direct material identification becomes possible for geologic studies. SPAM provides a variety of capabilities for carrying out interactive analysis of the massive and complex datasets associated with multispectral remote sensing observations. In addition to normal image processing functions, SPAM provides multiple levels of on-line help, a flexible command interpretation, graceful error recovery, and a program structure which can be implemented in a variety of environments. SPAM was designed to be visually oriented and user friendly with the liberal employment of graphics for rapid and efficient exploratory analysis of imaging spectrometry data. SPAM provides functions to enable arithmetic manipulations of the data, such as normalization, linear mixing, band ratio discrimination, and low-pass filtering. SPAM can be used to examine the spectra of an individual pixel or the average spectra over a number of pixels. SPAM also supports image segmentation, fast spectral signature matching, spectral library usage, mixture analysis, and feature extraction. High speed spectral signature matching is performed by using a binary spectral encoding algorithm to separate and identify mineral components present in the scene. The same binary encoding allows automatic spectral clustering. Spectral data may be entered from a digitizing tablet, stored in a user library, compared to the master library containing mineral standards, and then displayed as a timesequence spectral movie. The output plots, histograms, and stretched histograms produced by SPAM can be sent to a lineprinter, stored as separate RGB disk files, or sent to a Quick Color Recorder. SPAM is written in C for interactive execution and is available for two different machine environments. There is a DEC VAX/VMS version with a central memory requirement of approximately 242K of 8 bit bytes and a machine independent UNIX 4.2 version. The display device currently supported is the Raster Technologies display processor. Other 512 x 512 resolution color display devices, such as De Anza, may be added with minor code modifications. This program was developed in 1986.

Beschreibung: SUNTRACKER computes the azimuth and elevation angles of the sun over a user defined period of time for a given position on the moon. The program gets the selenographic (moon centered) position of the sun at a given Julian date, then converts the selenographic position of the sun into azimuth and elevation at a given position on the moon. The selenographic coordinate system is based on the equatorial plane of the moon. The origin of this system is referenced to the mean center of the apparent lunar disk. This is the point of the surface of the moon intersected by the lunar radius directed towards the center of the earth when the moon is at its mean ascending node. Selenographic longitudes are measured positive in the direction towards Mare Crisium from the lunar meridian passing through the origin. Selenographic latitudes are measured positive towards the northern hemisphere containing Mare Serenitatis, from the lunar equator. The selenographic co-longitude is obtained by subtracting the selenographic longitude from either 90 or 450 degrees. SUNTRACKER performs two main operations. The first handles the Julian and calendar date calculations. The second operation calculates the right ascension and declination of the sun and moon on the Earth's equatorial coordinate system from the adjusted Julian date. These coordinates are then transferred into the ecliptic coordinate system. From here the moon's position is configured to the heliocentric ecliptic coordinate system. It is from this system that the sun's selenographic position is determined. Algorithms are then used to compute both the physical and optical librations of the moon's motion. The limitations, restrictions and assumptions for SUNTRACKER are as follows: 1) The orbital elements used in this program do not account for nutation, aberration and precession. 2) The selenographic coordinates computed by this program are based on the 1961 Astronomical Ephemeris algorithms. In 1981, a new analytic theory on the librations of the moon was adopted by The Astronomical Almanac. This improved the method of calculating selenographic coordinates. The selenographic coordinates computed by SUNTRACKER are identical to the pre-1981 Astronomical Almanac values. A comparison between the program's values and the 1993 Astronomical Almanac's values found the maximum deviations in longitude and latitude to be .030 deg. and .034 deg. respectively. The average deviations were .013 deg. in selenographic co-longitude and .017 deg. in selenographic latitude. SUNTRACKER is written in FORTRAN 77 for IBM PC compatible computers running MS-DOS. The sample executable included on the media requires 64K of RAM and the Lahey FORTRAN 77 run time library for execution. The standard distribution medium for this program is a 5.25 inch 360K MS-DOS format diskette.

Beschreibung: QUIKVIS computes the times during an Earth orbit when geometric requirements are satisfied for observing celestial objects. The observed objects may be fixed (stars, etc.) or moving (sun, moon, planets). QUIKVIS is useful for preflight analysis by those needing information on the availability of celestial objects to be observed. Two types of analyses are performed by QUIKVIS. One is used when specific objects are known, the other when targets are unknown and potentially useful regions of the sky must be identified. The results are useful in selecting candidate targets, examining the effects of observation requirements, and doing gross assessments of the effects of the orbit's right ascension of the ascending node (RAAN). The results are not appropriate when high accuracy is needed (e.g. for scheduling actual mission operations). The observation duration is calculated as a function of date, orbit node, and geometric requirements. The orbit right ascension of the ascending node can be varied to account for the effects of an uncertain launch time of day. The orbit semimajor axis and inclination are constant throughout the run. A circular orbit is assumed, but a simple program modification will allow eccentric orbits. The geometric requirements that can be processed are: 1) minimum separation angle between the line of sight to the object and the earth's horizon; 2) minimum separation angle between the line of sight to the object and the spacecraft velocity vector; 3) maximum separation angle between the line of sight to the object and the zenith direction; and 4) presence of the spacecraft in the earth's shadow. The user must supply a date or date range, the spacecraft orbit and inclination, up to 700 observation targets, and any geometric requirements to be met. The primary output is the time per orbit that conditions are satisfied, with options for sky survey maps, time since a user-specified orbit event, and bar graphs illustrating overlapping requirements. The output is printed in visually convenient lineprinter form but is also available on data files for use by postprocessors such as external XY plotters. QUIKVIS is written in FORTRAN 77 for batch or interactive execution and has been implemented on a DEC VAX 11/780 operating under VMS with a central memory requirement of approximately 500K of 8 bit bytes. QUIKVIS was developed in 1986 and revised in 1987.

Beschreibung: The Science and Technology Laboratory Applications Software (ELAS) was originally designed to analyze and process digital imagery data, specifically remotely-sensed scanner data. This capability includes the processing of Landsat multispectral data; aircraft-acquired scanner data; digitized topographic data; and numerous other ancillary data, such as soil types and rainfall information, that can be stored in digitized form. ELAS has the subsequent capability to geographically reference this data to dozens of standard, as well as user created projections. As an integrated image processing system, ELAS offers the user of remotely-sensed data a wide range of capabilities in the areas of land cover analysis and general purpose image analysis. ELAS is designed for flexible use and operation and includes its own FORTRAN operating subsystem and an expandable set of FORTRAN application modules. Because all of ELAS resides in one "logical" FORTRAN program, data inputs and outputs, directives, and module switching are convenient for the user. There are over 230 modules presently available to aid the user in performing a wide range of land cover analyses and manipulation. The file management modules enable the user to allocate, define, access, and specify usage for all types of files (ELAS files, subfiles, external files etc.). Various other modules convert specific types of satellite, aircraft, and vector-polygon data into files that can be used by other ELAS modules. The user also has many module options which aid in displaying image data, such as magnification/reduction of the display; true color display; and several memory functions. Additional modules allow for the building and manipulation of polygonal areas of the image data. Finally, there are modules which allow the user to select and classify the image data. An important feature of the ELAS subsystem is that its structure allows new applications modules to be easily integrated in the future. ELAS has as a standard the flexibility to process data elements exceeding 8 bits in length, including floating point (noninteger) elements and 16 or 32 bit integers. Thus it is able to analyze and process "non-standard" nonimage data. The VAX (ERL-10017) and Concurrent (ERL-10013) versions of ELAS 9.0 are written in FORTRAN and ASSEMBLER for DEC VAX series computers running VMS and Concurrent computers running MTM. The Sun (SSC-00019), Masscomp (SSC-00020), and Silicon Graphics (SSC-00021) versions of ELAS 9.0 are written in FORTRAN 77 and C-LANGUAGE for Sun4 series computers running SunOS, Masscomp computers running UNIX, and Silicon Graphics IRIS computers running IRIX. The Concurrent version requires at least 15 bit addressing and a direct memory access channel. The VAX and Concurrent versions of ELAS both require floating-point hardware, at least 1Mb of RAM, and approximately 70Mb of disk space. Both versions also require a COMTAL display device in order to display images. For the Sun, Masscomp, and Silicon Graphics versions of ELAS, the disk storage required is approximately 115Mb, and a minimum of 8Mb of RAM is required for execution. The Sun version of ELAS requires either the X-Window System Version 11 Revision 4 or Sun OpenWindows Version 2. The Masscomp version requires a GA1000 display device and the associated "gp" library. The Silicon Graphics version requires Silicon Graphics' GL library. ELAS display functions will not work with a monochrome monitor. The standard distribution medium for the VAX version (ERL~10017) is a set of two 9-track 1600 BPI magnetic tapes in DEC VAX BACKUP format. This version is also available on a TK50 tape cartridge in DEC VAX BACKUP format. The standard distribution medium for the Concurrent version (ERL-10013) is a set of two 9-track 1600 BPI magnetic tapes in Concurrent BACKUP format. The standard distribution medium for the Sun version (SSC-00019) is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the Masscomp version, (SSC-00020) is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the Silicon Graphics version (SSC-00021) is a .25 inch streaming magnetic IRIS tape cartridge in UNIX tar format. Version 9.0 was released in 1991. Sun4, SunOS, and Open Windows are trademarks of Sun Microsystems, Inc. MIT X Window System is licensed by Massachusetts Institute of Technology.

Beschreibung: The Science and Technology Laboratory Applications Software (ELAS) was originally designed to analyze and process digital imagery data, specifically remotely-sensed scanner data. This capability includes the processing of Landsat multispectral data; aircraft-acquired scanner data; digitized topographic data; and numerous other ancillary data, such as soil types and rainfall information, that can be stored in digitized form. ELAS has the subsequent capability to geographically reference this data to dozens of standard, as well as user created projections. As an integrated image processing system, ELAS offers the user of remotely-sensed data a wide range of capabilities in the areas of land cover analysis and general purpose image analysis. ELAS is designed for flexible use and operation and includes its own FORTRAN operating subsystem and an expandable set of FORTRAN application modules. Because all of ELAS resides in one "logical" FORTRAN program, data inputs and outputs, directives, and module switching are convenient for the user. There are over 230 modules presently available to aid the user in performing a wide range of land cover analyses and manipulation. The file management modules enable the user to allocate, define, access, and specify usage for all types of files (ELAS files, subfiles, external files etc.). Various other modules convert specific types of satellite, aircraft, and vector-polygon data into files that can be used by other ELAS modules. The user also has many module options which aid in displaying image data, such as magnification/reduction of the display; true color display; and several memory functions. Additional modules allow for the building and manipulation of polygonal areas of the image data. Finally, there are modules which allow the user to select and classify the image data. An important feature of the ELAS subsystem is that its structure allows new applications modules to be easily integrated in the future. ELAS has as a standard the flexibility to process data elements exceeding 8 bits in length, including floating point (noninteger) elements and 16 or 32 bit integers. Thus it is able to analyze and process "non-standard" nonimage data. The VAX (ERL-10017) and Concurrent (ERL-10013) versions of ELAS 9.0 are written in FORTRAN and ASSEMBLER for DEC VAX series computers running VMS and Concurrent computers running MTM. The Sun (SSC-00019), Masscomp (SSC-00020), and Silicon Graphics (SSC-00021) versions of ELAS 9.0 are written in FORTRAN 77 and C-LANGUAGE for Sun4 series computers running SunOS, Masscomp computers running UNIX, and Silicon Graphics IRIS computers running IRIX. The Concurrent version requires at least 15 bit addressing and a direct memory access channel. The VAX and Concurrent versions of ELAS both require floating-point hardware, at least 1Mb of RAM, and approximately 70Mb of disk space. Both versions also require a COMTAL display device in order to display images. For the Sun, Masscomp, and Silicon Graphics versions of ELAS, the disk storage required is approximately 115Mb, and a minimum of 8Mb of RAM is required for execution. The Sun version of ELAS requires either the X-Window System Version 11 Revision 4 or Sun OpenWindows Version 2. The Masscomp version requires a GA1000 display device and the associated "gp" library. The Silicon Graphics version requires Silicon Graphics' GL library. ELAS display functions will not work with a monochrome monitor. The standard distribution medium for the VAX version (ERL~10017) is a set of two 9-track 1600 BPI magnetic tapes in DEC VAX BACKUP format. This version is also available on a TK50 tape cartridge in DEC VAX BACKUP format. The standard distribution medium for the Concurrent version (ERL-10013) is a set of two 9-track 1600 BPI magnetic tapes in Concurrent BACKUP format. The standard distribution medium for the Sun version (SSC-00019) is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the Masscomp version, (SSC-00020) is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the Silicon Graphics version (SSC-00021) is a .25 inch streaming magnetic IRIS tape cartridge in UNIX tar format. Version 9.0 was released in 1991. Sun4, SunOS, and Open Windows are trademarks of Sun Microsystems, Inc. MIT X Window System is licensed by Massachusetts Institute of Technology.

Beschreibung: IMAGEP is a FORTRAN computer algorithm containing various image processing, analysis, and enhancement functions. It is a keyboard-driven program organized into nine subroutines. Within the subroutines are other routines, also, selected via keyboard. Some of the functions performed by IMAGEP include digitization, storage and retrieval of images; image enhancement by contrast expansion, addition and subtraction, magnification, inversion, and bit shifting; display and movement of cursor; display of grey level histogram of image; and display of the variation of grey level intensity as a function of image position. This algorithm has possible scientific, industrial, and biomedical applications in material flaw studies, steel and ore analysis, and pathology, respectively. IMAGEP is written in VAX FORTRAN for DEC VAX series computers running VMS. The program requires the use of a Grinnell 274 image processor which can be obtained from Mark McCloud Associates, Campbell, CA. An object library of the required GMR series software is included on the distribution media. IMAGEP requires 1Mb of RAM for execution. The standard distribution medium for this program is a 1600 BPI 9~track magnetic tape in VAX FILES-11 format. It is also available on a TK50 tape cartridge in VAX FILES-11 format. This program was developed in 1991. DEC, VAX, VMS, and TK50 are trademarks of Digital Equipment Corporation.

Beschreibung: The recent discovery of an object bound to the sun by gravity but situated beyond the orbit of Pluto is discussed. The discovery of this object, designated 1992 QB1, may confirm the existence of the Kuiper belt, envisioned to be a disk of far-flung comets left over from the origin of the solar system. The implications of the new discovery for the future search for distant comets beyond Pluto are examined.

Beschreibung: Flaws of the depth analysis technique of distinguishing photographic plate defects are discussed. The method is shown to be unreliable in confirming or disproving the astrophysical nature of optical transients. The arguments of Greiner and of Zytkow to the contrary are criticized.

Beschreibung: This paper discusses the biophysical stratification of the FIFE site, implementation of the stratification utilizing geographic information system methods, and validation of the stratification with respect to field measurements of biomass, Bowen ratio, soil moisture, and the greenness vegetation index (GVI) derived from TM satellite data. Maps of burning and topographic position were significantly associated with variation in GVI, biomass, and Bowen ratio. The stratified design did not significantly alter the estimated site-wide means for surface climate parameters but accounted for between 25 and 45 percent of the sample variance depending on the variable.

Beschreibung: During the intensive field campaigns of the First International Satellite Land Surface Climatology Project (ISLSCP) Field Experiment (FIFE) in May-October of 1987, several nearly simultaneous measurements were made with low-altitude flights of the L-band radiometer and C- and X-band scatterometers over two transects in the Konza Prairie Natural Research Area, some 8 km south of Manhattan, Kansas. These measurements showed that although the scatterometers were sensitive to soil moisture variations in most regions under the flight path, the L-band radiometer lost most of its sensitivity in regions unburned for many years. The correlation coefficient derived from the regression between the radar backscattering coefficient and the soil moisture was found to improve with the increase in antenna incidence angle. This is attributed to a steeper falloff of the backscattering coefficient as a function of local incidence at angles near nadir than at angles greater than 30 deg.

Beschreibung: Four radiometric correction methods for the reduction of slope-aspect effects in a Landsat TM data set are tested in a mountainous test site with regard to their physical soundness and their influence on forest classification, as well as on the visual appearance of the scene. Excellent ground reference information and a fine-resolution DEM allowed precise assessment of the applicability of the methods under investigation. The results of the study presented here demonstrate the weakness of the classical cosine correction method for radiometric correction in rugged terrain. The statistical, Minnaert and C-correction approaches, however, yielded an improvement of the forest classification and an impressive reduction of the visual topography effect.

Beschreibung: Development of a first-order radiative transfer model for predicting backscatter from tree canopies has been underway at the University of Michigan Radiation Laboratory for some time. This model is known as the Michigan Microwave Canopy Scattering (MIMICS) model. This article presents the second-generation MIMICS model (MIMICS II) which accounts for canopies with discontinuous (open) crown layer geometries. MIMICS II models open crown layers by treating the location, size, and shape of the individual tree crowns as random variables. The backscattering coefficients for the canopy are then determined by introducing statistics derived from these parameters into the radiative transfer solution. Application of the radiative transfer equations to the discontinuous canopy geometry is presented. The resulting model is a robust fully polarimetric solution that is applicable over a wide variety of canopy architectures. Model simulations are compared to results generated with the continuous canopy model. The effect of the open crown geometry is found to be most significant at shallow incidence angles and at high frequencies for trees with well-developed crowns. Under these conditions, the gaps in the crown layer give rise to a notable increase in crown layer transmissivity which allows the radar to see through to the lower layers of the canopy more easily, thereby directly affecting the backscatter contribution of the trunks and ground.

Beschreibung: Experimental studies are performed on some coniferous trees (Austrian pine, Nordmann spruce, and Norway spruce) to investigate the relation between the tree architecture and radar signal at X-band. For a single tree, the RCS is measured as a function of the scatterer location at 90 deg incidence. It is found that the main scatterers are the leafy branches and the difference between sigma(vv) and sigma(hh) is significant at the upper portion of the tree. At the lower portion of the tree, sigma(vv) and sigma(hh) have almost the same level. For a group of trees the angular trends of sigma(vv) and sigma(hh) are measured. It is found that the levels of sigma(vv) and sigma(hh) are of the same order, but their angular trends vary from one tree species to the other depending on the tree species structure. The interpretation of these experimental results is carried out with the help of a theoretical model which accounts for the structure of the tree. According to this theoretical study, the major scattering trend is due to the leaves, while the perturbation to the angular trend and the level difference between sigma(vv) and sigma(hh) are due to the branch orientation distributions (i.e., the tree architecture).

Beschreibung: A radar system based on a network analyzer has been developed to study the backscatter from vegetation. The radar is operated at L-band. Radar measurements of a grass field were made in 1991. The radar returns from the grass were measured at three incidence angles. Ground truth and canopy parameters such as blade and stem dimensions, moisture content of the grass and the soil, and blade and stem density, were measured. These parameters are used in a distorted Born approximation model to compute the backscatter coefficients from the grass layer. The model results are compared with the radar data.

Beschreibung: The direction angle sensitivity of agricultural field backscatter is studied. The direction angle is defined as the angle between the incident plane and the perpendicular to the row direction. Maximum backscatter power from an angricultural field is expected to occur when the furrow induced slopes are oriented towards the radar, i.e., for a 0 deg direction angle. This effect is known as the cardinal effect. Because of the way the looks are formed in the NASA/JPL airborne synthetic aperture radar (AIRSAR) processor, each look corresponds to a slightly different squint angle. This provides a unique data set to analyze the cardinal effect, as it allows simultaneous observations of the backscatter of a field for sixteen different direction angles. The backscatter variations of the agricultural fields with direction angle at P-, L-, and C-bands is described. The observed variations in backscatter are compared with model predictions. The model predicts that the maximum backscatter occurs for a 0 deg direction angle, but underestimates the backscatter variations with direction angle by more than 10 dB.

Beschreibung: C-, L-, and P-band polarimetric signatures of wet snow surfaces have been analyzed, based on airborne synthetic aperture radar (AIRSAR) surveys of an Alpine test site. The importance of surface roughness is evident in the C- and L-band signatures, whereas the diffuse scattering contribution by internal inhomogeneities in the snowpack increases from the C- to the P-band at incidence angles below 50 deg due to increasing penetration.

Beschreibung: The Jet Propulsion Laboratory (JPL) airborne synthetic aperture radar (AIRSAR) L-band along-track interferometer images currents and waves on the ocean surface. By modifying the operating procedure of this two antenna interferometer, a technique has been developed to enable interferometric measurements to be made simultaneously at two different baselines. The availability of such data allows measurement of the decorrelation process of the ocean in greater detail. The coherence time of the ocean surface can be measured at high resolution over large areas. In addition to the L-band interferometer, a C-band along-track interferometer has been developed. It allows C-band dual-baseline measurements to be made simultaneous with the L-band measurements. The dual-baseline technique and AIRSAR implementation are described, and some example data are presented.

Beschreibung: The authors discuss the feasibility of determining the surface flux of sensible heat from forests with surface temperatures measured by satellites together with temperature soundings in the unstable atmospheric boundary layer (ABL). The latent heat flux is derived from the sensible heat flux by means of the energy budget. The study makes use of data collected during HAPEX-MOBILHY (Hydrologic Atmospheric Pilot Experiment-Modelization du Bilan Hydrique). The methodology is based on turbulence similarity for the unstable ABL. The surface temperature data were derived from measurements by the advanced very high resolution radiometer (AVHRR) aboard the NOAA-9 satellite; the atmospheric profiles were obtained by radiosondes.

Beschreibung: The authors examine the hypothesis that some part of the ecosystem-dependent variability of the vegetation indices is attributable to the effects of specular reflection of sunlight by leaves. A new class of vegetation indices, or 'minus specular' vegetation indices, is defined to account for the effects of specularly reflected light. Results show that the 'minus specular' indices, when compared to the traditional vegetation indices, potentially provide better estimates of the photosynthetic activity of a canopy than the traditional vegetation indices, particularly as a function of sun and view angles.

Beschreibung: The field experiment described took place in the Sayani Mountains of Siberia. The purpose of the joint field campaign was to observe and exchange methodologies with Russian scientists with regard to the development of remote sensing techniques for the early detection and assessment of forest decline damage believed to be associated with atmospheric deposition and/or insect and disease infestations. Several types of passive and active remote sensing measurements were made in conjunction with biophysical measurements on vegetative samples collected from four study sites representing a strong elevational gradient. Relatively cloud-free SPOT data were also acquired over the study area. Moderate canopy damage was recorded at the mid-elevation site (3400 ft/1037 m). The lowest levels of damage were recorded at the lowest elevation site (2300 ft/701 m.) At all sites, east versus west flagging of the canopy was noted (i.e., full canopy on the west-facing side of the canopy, significantly less foliage on the east-facing side).

Beschreibung: Earth photography from the Space Shuttle is used to examine the ice cover on Lake Baikal and correlate the patterns of weakened and melting ice with known hydrothermal areas in the Siberian lake. Particular zones of melted and broken ice may be surface expressions of elevated heat flow in Lake Baikal. The possibility is explored that hydrothermal vents can introduce local convective upwelling and disrupt a stable water column to the extent that the melt zones which are observed in the lake's ice cover are produced. A heat flow map and photographs of the lake are overlaid to compare specific areas of thinned or broken ice with the hot spots. The regions of known hydrothermal activity and high heat flow correlate extremely well with circular regions of thinned ice, and zones of broken and recrystallized ice. Local and regional climate data and other sources of warm water, such as river inlets, are considered.

Beschreibung: A new method is presented for estimating the aerodynamic roughness length of heterogeneous land surfaces and complex landscapes using elevation measurements performed with an airborne laser altimeter and the Seasat radar altimeter. Land surface structure is characterized at increasing length scales by considering three basic landscape elements: (1) partial to complete canopies of herbaceous vegetation; (2) sparse obstacles (e.g., shrubs and trees); and (3) local relief. Measured parameters of land surface geometry are combined to obtain an effective aerodynamic roughness length which parameterizes the total atmosphere-land surface stress.

Beschreibung: An iterative parallel region growing (IPRG) algorithm previously developed by Tilton (1989) produces hierarchical segmentations of images from finer to coarser resolution. An ideal segmentation does not always correspond to one single iteration but to several different ones, each one producing the 'best' result for a separate part of the image. With the goal of finding this ideal segmentation, the results of the IPRG algorithm are refined by utilizing some additional information, such as edge features, and by interpreting the tree of hierarchical regions.

Beschreibung: Radar backscatter measurements over the Konza Prairie were obtained by means of C- and X-band scatterometers as a part of the first ISLSCP Field Experiment (FIFE) to determine soil moisture. Nearly simultaneous radar and radiometer data sets were collected along two transects that coincided with direct soil-moisture measurements. The results show that radars can be used for soil-moisture estimation over the complete transect, whereas radiometer sensitivity to soil moisture is drastically reduced over regions left unburned for many years. A combined rough-surface/volume scatter model was formulated. Calculated and measured scattering data are compared to determine the sensitivity of the scattering coefficient to different surface treatments.

Beschreibung: The synthetic aperture radar (SAR) data processing algorithm used by the Alaska SAR Facility (ASF) for the European Space Agency's first Remote-Sensing Satellite (E-ERS-1) SAR data are examined. Preprocessing highlights two features: signal measurement, which includes signal-to-noise ratio, replica measurement, and noise measurement; and Doppler measurement, which includes clutter lock and autofocus. The custom pipeline architecture performs the main processing with controls at the input interface, range correlator, corner-turn memory, azimuth correlator, and multi-look memory. The control software employs a flexible control scheme. The Committee on Earth Observation Satellites (CEOS) format encapsulates the ASF products. System performance for SAR image processing of E-ERS-1 data is reviewed.

Beschreibung: Narrow-angle astrometry has many astrophysical applications, from the measurement of parallaxes to the search for planets around nearby stars. Ground-based long-focus telescopes with photoelectric detectors have achieved accuracies of about 2-3 milliarcsec in 1 h. This accuracy is limited primarily by the atmosphere, and is consistent with models of atmospheric turbulence. However, applying these turbulence models to observations with long-baseline interferometers yields astrometric errors that are far smaller than can be achieved with long-focus telescopes. The predictions for the ultimate accuracy of ground-based narrow-angle astrometry using long-baseline IR (2.2 micron) stellar interferometers are very promising. With the excellent seeing at a high altitude site like Mauna Kea, the atmospheric limit for a 1 h astrometric measurement is expected to be of the order of 10 microarcsec for 1 h of integration. This two-order-of-magnitude improvement over conventional measurements is due to two effects. One is that a long-baseline IR interferometer can find useful reference stars very near an arbitrary target star, so that the atmospherically-induced motions of both stars are highly correlated. The second is that the baseline length can be much larger than the separation of the stellar beams in the turbulent atmosphere, resulting in a reduction in astrometric error with increasing baseline length.

Beschreibung: Prospects for lunar-based astronomy and the development of the required technologies are briefly reviewed. A systematic approach to lunar-based astronomy includes a progression in capability from small automated telescopes to the 16-meter reflector on the moon. A next step beyond the 16-meter reflector will be a Lunar Optical/Ultraviolet/Infrared Synthesis Array. Intermediate steps are represented by the Lunar Transit Telescope and the Lunar Cluster Telescope Experiment. Priorities for the required technology development are identified.

Beschreibung: The Lunar Telescope Working Group of the Marshall Space Flight Center, NASA, has conducted conceptual studies of an evolutionary family of UV/ optical/IR telescopes to be based on the lunar surface. Included are: (1) the 16-m aperture Large Lunar Telescope; (2) the 4-m aperture precursor Lunar Cluster Telescope Experiment; and (3) the 2-m Lunar Transit Telescope proposed by John McGraw of the Steward Observatory. Development and emplacement of these advanced astronomical facilities would parallel the buildup of an initial lunar exploration site, an early lunar outpost, and a permanent lunar base. The Working Group has examined the feasibility of constructing such telescopes and assessed technology, subsystem, system, transportation, and operations requirements for their development and emplacement. Influences of the lunar environment and site selection on telescope design and operation were also evaluated.

Beschreibung: Plot-scale hydrologic field studies were initiated at NASA Marshall Space Flight Center to a) investigate the spatial and temporal variability of surface and subsurface hydrologic processes, particularly as affected by vegetation, and b) develop experimental techniques and associated instrumentation methodology to study hydrologic processes at increasingly large spatial scales. About 150 instruments, most of which are remotely operated, have been installed at the field site to monitor ground atmospheric conditions, precipitation, interception, soil-water status, and energy flux. This paper describes the nature of the field experiment, instrumentation and sampling rationale, and presents preliminary findings.

Beschreibung: A minute displacement of the radio source in Algol was measured by VLBI during two consecutive orbital revolutions of the close binary. The magnitude of the displacement unambiguously indicates that the less massive star of the close binary, a K subgiant, is the star responsible for the nonthermal radio emission of the system. This is consistent with the idea that the radio emission in Algol is related to the strong magnetic activity of the subgiant. The orientation and sense of the displacement on the sky that are directly deduced from our astrometric VLBI observations imply: (1) that the orbital plane of the close binary is at P.A. = +52 deg +/- 5 deg; and (2) that the sense of circulation of the close binary is clockwise, as seen on the sky. Thus, the long-period and close binary orbital motions are almost orthogonal and counterrevolving and this is relevant for evolution and dynamical studies.

Beschreibung: The feasibility of using imaging spectrometry in studies of playa evaporites is demonstrated by mapping efflorescent salt crusts in Death Valley (California), using Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data and a recently developed least-squares spectral band-fitting algorithm. It is shown that it was possible to remotely identify eight different saline minerals, including three borates that have not been previously reported for the Death Valley efflorescent crusts: hydroboracite, pinnoite, and rivadavite. The three borates are locally important phases in the crusts; at least one of them, rivadavite, appears to be forming directly from brine.

Beschreibung: Data on chlorophyll content and bathymetry of Lake Tahoe obtained on August 9, 1990 by the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) are compared to concurrent in situ surface and in-water measurements. Measured parameters included profiles of percent transmission of monochromatic light, stimulated chlorophyll fluorescence, photosynthetically available radiation, spectral upwelling and downwelling irradiance, and upwelling radiance. Several analyses were performed illustrating the utility of the AVIRIS over a dark water scene. Image-derived chlorophyll concentration compared extremely well with that measured with bottle samples. A bathymetry map of the shallow parts of the lake was constructed which compares favorably with published lake soundings.

Beschreibung: The Burst and Transient Source Experiment (BATSE) detects any gamma-ray burst not obscured by the earth and intense enough to produce a sufficiently strong signal in at least two of its eight large area NaI detectors (LADs). For a given intensity, a LAD records a stronger signal from a source which directly faces it than from a source to its side. Thus, BATSE's detection of a gamma-ray burst may depend upon the burst's direction. We discuss the effect of this uneven exposure to the sky on the instrument's measurement of the distribution of gamma-ray burst directions and intensities, and we describe our method of accounting for the effect.

Beschreibung: The goal of the Germanium GAlactic Plane Patrol mission (GGAPP) is to provide a continuous monitor of the Galactic Plane (GP) for variable sources of gamma-ray lines. Potentially interesting sources include black hole candidates, X-ray binary systems, pulsars, gamma-ray bursts, and solar flares. The GGAPP instrument is an array of Ge detectors cooled by a mechanical refrigerator to achieve a spectral resolution of 2 keV at 1 MeV (1/500). A bismuth germanate (BGO) shield will restrict the field-of-view (FOV) to within 20 deg of the GP, and a modulation collimator system will locate strong sources to less than 0.3 deg in galactic longitude, provide a direct means of subtracting background, and mapping the diffuse emission from the GP. The spacecraft will be rotationally stabilized with the spin axis perpendicular to the GP such that the modulator scans in galactic longitude. A HEO or L1 orbit will keep GGAPP far away from the strong background produced by the Earth. GGAPP will provide a natural bridge between GRO and future missions such as INTEGRAL/NAE.

Beschreibung: The effect of varying BATSE trigger parameters on the modeled BATSE detection rate is investigated numerically. Quantitative estimates are obtained of the systematic effects generated by the complex interplay of trigger times, variations in the signal-to-noise ratio for burst detection as well as the time scale over which backgrounds are determined, and the number of required detections above threshold. It is found, in particular that employing a third detection, at a reduced signal-to-noise ratio, to resolve a burst does not increase the detection rate. It is also shown that the BATSE detection rate is insensitive to variations in the time scale over which the background is determined.

Beschreibung: The Burst and Transient Source Experiment (BATSE) consists of eight anisotropic gamma-ray spectrometers at the corners of the Compton Gamma Ray Observatory. BATSE monitors the full sky from a fixed orientation and determines the direction of gamma-ray bursts with an accuracy appropriate for studying the bursts' celestial distribution. We describe the calculation of gamma-ray burst directions from measurements made by BATSE. We present a sample of calculated directions from BATSE's measurement of solar flaxes and compare the calculated directions with the solar direction. We describe the systematic errors apparent in these data and discuss ongoing efforts to correct them.

Beschreibung: This status report presents some details on the project 'Search for time-correlated optical counterparts of gamma-ray bursters'. The photographic sky patrol of the three observatories Sonneberg (FRG), Ondrejov (CSFR), and Odessa (USSR) is used to look for patrol plates which have been exposed simultaneously with a gamma-ray burst detected by GRO. Our expectations and the very first results are presented.

Beschreibung: We have developed seven compact soft X-ray/EUV (XUV) multilayer coated and two compact FUV interference film coated Cassegrain and Ritchey-Chretien telescopes for a rocket borne observatory, the Multi-Spectral Solar Telescope Array. We report here on extensive measurements of the efficiency and spectral bandpass of the XUV telescopes carried out at the Stanford Synchrotron Radiation Laboratory.

Beschreibung: A major component of the Advanced Solar Observatory is the High Resolution Telescope Cluster (HRTC) for investigations of the solar atmosphere at soft X-ray, XUV, EUV, and VUV wavelengths, via high resolution spectroheliograms in lines and continuum emitted over the full, (4500 to 100,000,000 K) range of temperatures of the outer solar atmosphere; angular resolution may be as high as 0.03 arcsec. An analysis is conducted of a model HRTC instrument complement encompassing a 60-90 cm aperture VUV telescope, a 40-50 cm aperture EUV telescope, three 40-50 cm aperture XUV telescopes, and a 40-cm aperture soft X-ray telescope, as well as flare spectrometers and polarimeters and four coronagraph/spectrographs.

Beschreibung: The Solar/Stellar Coronal Explorer (SSCE) carries six identical Ritchey-Chretien Telescopes of 127 mm aperture each; their images will be recorded by multianode microchannel-array detectors. The mirrors of five of the telescopes are coated with multilayer reflecting structures that select narrow XUV wavelength bands corresponding to strong emission lines emitted by solar or stellar coronal plasmas. Also noted here is a larger explorer mission concept, that of the Solar/Stellar Coronal Observatory, which will undertake more extensive spectroscopic observations.

Beschreibung: The Ultra-High Resolution XUV Spectroheliograph (UHRXS) is a comprehensive solar observatory capable of studying solar phenomena at soft X-ray, XUV, EUV, and VUV wavelengths with normal incidence imaging multilayer telescopes capable of very high angular resolution (about 0.1 arcsec), and spectrographs able to achieve high spectral resolution. This instrument has been selected by NASA for flight as an attached payload on the Space Station Freedom. Recent developments have made it clear that accommodations for attached payloads on Freedom will not become available during the initial operations of Freedom and may never be available. We have studied the changes that must be made to place the UHRXS instrument on a Free Flying Plafform such as the Delta Launched Explorer Bus. We report on the configuration, performance, and accommodation on a free flying platform of the revised UHRXS concept.

Beschreibung: The Multi-Spectral Solar Telescope Array (MSSTA) is a sounding rocket-borne solar observatory which was succesfully launched on May 13, 1991, from the White Sands Missile Range, NM. Ultrahigh resolution, full-disk solar X-ray, EUV, and FUV images were obtained with the MSSTA Herschelian, Cassegrain, and Ritchey-Chretien telescopes. We describe the payload and provide some preliminary scientific results from the flight.

Beschreibung: The Broad-Band X-Ray Telescope (BBXRT) was designed to carry out moderate resolution spectrophotometry of cosmic X-ray sources in the 0.3-12 keV band from the Space Shuttle. It consists of a pair of coaligned conical foil telescopes, with cryogenically cooled Si(Li) spectrometers as focal instruments. It was flown as part of the Astro-1 mission in December, 1990. The in-flight performance of the instrument was essentially as predicted on the basis of ground calibration and modelling. We discuss the performance of the system, with emphasis on the conical mirror systems, and present some preliminary scientific results which illustrate the power of broad band, high sensitivity X-ray spectrophotometry.

Beschreibung: We review the scientific objectives, configuration, and initial flight results of the Multi-Spectral Solar Telescope Array (MSSTA). The MSSTA is a comprehensive solar rocket-borne observatory which utilizes multilayer coated optics to achieve high resolution thermally resolved images of the sun at FUV, EUV and soft X-ray wavelengths. The MSSTA was successfully flown on May 13, 1991, obtaining high resolution images of chromospheric and coronal structures, including loops, filaments, polar plumes, and coronal holes. We also discuss plans to expand the capabilities of the MSSTA for future flights.

Beschreibung: The X-ray test of the largest pair of nearly cylindrical mirrors for the Advanced X-ray Astrophysics Facility (AXAF) was completed in October 1991 at Marshall Space Flight Center. The test assembly was named the Verification Engineering Test Article I (VETA-I). The ring-focus portion of the test measured the imaging quality of azimuthal sections of VETA-I. This gives information about the core of the on-orbit image. The finite source distance, VETA-I mirror spacing, and VETA-I structural deformation caused the core of the image to be spread over a diameter of nearly 4 arc seconds at the VETA-I overall focus. The results of a preliminary analysis of the ring-focus data and the implications for the on-orbit image of the telescope are discussed. An upper limit for the on-orbit encircled-energy fraction at 1 arc second diameter was determined to be 0.82 at 0.277 keV X-ray energy. This assumes that the bottoms of the mirrors in the VETA-I arrangement are representative of the mirror surfaces and that the on-orbit system would be aligned using a combination of preliminary measurements and predictions for the mirror surface shapes.

Beschreibung: Detecting and imaging small wildfires with an Airborne Scanner is done against generally high background levels. The Airborne Scanner System used is a two-channel thermal IR scanner, with one channel selected for imaging the terrain and the other channel sensitive to hotter targets. If a relationship can be determined between the two channels that quantifies the background signal for hotter targets, then an algorithm can be determined that removes the background signal in that channel leaving only the fire signal. The relationship can be determined anywhere between various points in the signal processing of the radiometric data from the radiometric input to the quantized output of the system. As long as only linear operations are performed on the signal, the relationship will only depend on the system gain and offsets within the range of interest. The algorithm can be implemented either by using a look-up table or performing the calculation in the system computer. The current presentation will describe the algorithm, its derivation, and its implementation in the Firefly Wildfire Detection System by means of an off-the-shelf commercial scanner. Improvement over the previous algorithm used and the margin gained for improving the imaging of the terrain will be demonstrated.

Beschreibung: The potential of active structures technology for future IR and sub-mm telescopes deployed in space is discussed. A space infrared telescope with an aperture of at least 8 m, operating at about 50 k with surface precision better that 0.5 microns is required for future work in space IR and sub-mm astronomy. Telescope parameters, noise, and sensitivity are discussed. The effects of large scale figure errors are examined and conceptual designs of future space IR and sub-mm telescopes are presented. Possible uses of active structures technology and feedback control in future IR and sub-mm space observatories are suggested.

Beschreibung: Remotely sensed optical and microwave data can be synergistically used to infer land surface properties. Optical data can be used to estimate surface albedo, radiation absorption by vegetation canopies and their photosynthetic efficiencies. Vegetation canopy reflectance at red and near-infrared wavelengths can be used to correct for vegetation effect on microwave emissivities at low frequencies for estimating soil moisture. Optical data can also provide information about surface and air temperatures, precipitable water vapor, cloud top temperature and its water content. This information can be utilized to correct microwave data for atmospheric effects. These points are illustrated with theoretical analyses and by application to satellite data. The basic physical mechanisms operative at the various wavelengths are also discussed.

Beschreibung: Quantitative use of remote multispectral measurements to study and map land surface evapotranspiration has been a challenging issue for the past 20 years. Past work is reviewed against process physics. A simple two-layer combination-type model is used which is applicable to both vegetation and bare soil. The theoretic analysis is done to show which land surface properties are implicitly defined by such evaporation models and to assess whether they are measurable as a matter of principle. Conceptual implications of the spatial correlation of land surface properties, as observed by means of remote multispectral measurements, are illustrated with results of work done in arid zones. A normalization of spatial variability of land surface evaporation is proposed by defining a location-dependent potential evaporation and surface temperature range. Examples of the application of remote based estimates of evaporation to hydrological modeling studies in Egypt and Argentina are presented.

Beschreibung: Examples are presented of applications of a fast Fourier transform algorithm to analyze time series of images of Normalized Difference Vegetation Index values. The results obtained for a case study on Zambia indicated that differences in vegetation development among map units of an existing agroclimatic map were not significant, while reliable differences were observed among the map units obtained using the Fourier analysis.

Beschreibung: This paper discusses a multisensor satellite approach for the study of hydrological applications. Spectral as well as spatial and temporal characteristics of specific operational and planned instruments applicable to hydrology are presented. A hydrology specific series of sensors are proposed to fill the gaps not covered by the current and planned systems. We have called this hypothetical platform HYDROSAT. In addition, the trade-offs between a geostationary satellite and a polar orbiter are explored.

Beschreibung: Decorrelation of the radar signals with time, which is indicative of changes in the surface occurring during the period of time spanned by the images, is examined. It is concluded that the decorrelation effects due to thermal noise can be easily evaluated and removed, while those due to slight angular changes between flight tracks are negligible. Spatial baseline and rotation-induced decorrelation can be derived using the Fourier transform of the impulse response intensity, and increases linearly with baseline or rotation in an ideal system. Empirical results confirm that as the baseline increases, the overall correlation decreases due to spatial baseline noise.

Beschreibung: A number of approaches for calibrating SAR imaging data including data from multipolarization and multifrequency systems developed at the Jet Propulsion Laboratory are discussed. It is shown how calibrated SAR data can be used to improve the understanding of the physical properties of the earth's surface layer and how calibration uncertainties and system noise should be handled by the SAR data user. Examples of calibrated SAR data from the NASA/JPL DC-8 SAR are used to demonstrate use of calibrated data to monitor temporal change and to improve the classification of land cover type.

Beschreibung: Observational data on novae in outburst are reviewed, focusing on the information gained from ultraviolet spectroscopy. Topics discussed include a brief taxonomy of novae, the theoretical framework, observational diagnostics of the outburst, IUE satellite observations, and future trends in novae observations at many wavelengths using space-based observatories to augment the work of ground-based observers.

Beschreibung: The size and complexity of AVIRIS data sets makes analysis difficult. We present a technique that allows the researcher to rapidly scan the full data set in image form in order to empirically find significant spatial patterns anywhere across the spectrum. Our approach takes advantage of the speed and power of computer graphics workstations to allow real-time, interactive data manipulation and display. Empirical data selection avoids the bias inherent in theoretical selection criteria, and allows discovery of unexpected relationships within the data set. Link Winds, a prototype data analysis system under development, provides the visualization tools used in this study. We are applying this approach to geological studies in the eastern Mojave Desert.

Beschreibung: Current atmospheric correction models applied to imaging spectroscopy data include such methods as residual or scene average, flat field correction, regression method or empirical line algorithm, the continuum interpolated band ratio (CIBR) derivation and the LOWTRAN 7 method. Due to the limitations of using residual and flat field corrections on vegetated scenes, three methods will be compared: regression, CIBR derivation and LOWTRAN 7. Field-measured bright and dark targets taken at the time of the 13 April, 1989 AVIRIS overflight of Jasper Ridge, California were used to formulate the regression method atmospheric correction. Using this corrected scene as 'ground truth', the CIBR derivation and the LOWTRAN 7 method with both input models are compared on the vegetated Jasper Ridge scene. Although representing a qualitative approach, this is a first approximation and shows the need for more quantitative analysis.

Beschreibung: This paper provides a guide for the acquisition, processing, and interpretation of Landsat Thematic Mapper (TM) imagery of desert terrains for use in regional exploration. Sun angle considerations, data quality cautions, noise suppression routines, band selections, data calibration, spectral enhancements, perceptual considerations of displays, and general interpretation guidelines are all discussed as components of an image-information extraction procedure.

Beschreibung: The AXAF is a meter-class telescope that is planned to be the third of NASA's Great Observatories, joining the Hubble Space Telescope and the Compton Gamma Ray Observatory in orbit before the end of this decade. The telescope will approach tenth-arc-second resolution over a dynamic range of 100 (0.1-10 keV). An assortment of gratings and focal plane detectors will be utilized to provide unprecedented imaging and spectroscopic capabilities in a long-lived facility. In particular, the AXAF is unique in its high resolution imaging, and in the hard X-ray spectroscopy that can be performed with both high resolution and high throughput.

Beschreibung: The XTE will address a number of fundamental questions about the nature of the cosmos. The large effective area (about 0.8 sq m total) and broad band of sensitivity (2-200 keV) of its three instruments make it especially valuable for timing of intensity variations and for the determination of broadband spectra from high-energy sources. For the first time, studies of variability ranging from about 1 microsecond to several years will be carried out. XTE's design and flexibility of operations will allow it to respond rapidly to changes in the X-ray sky (within hours) and will facilitate multifrequency observations. It is scheduled for launch on a Delta II vehicle prior to April 1996.

Beschreibung: The BATSE large-area detectors on the Compton Observatory can be used to monitor the variability of X-ray and gamma-ray sources on timescales longer than a few hours using the earth occultation technique. Spectral information is collected in 16 channels covering the energy range from about 25 to 2000 keV. Approximately 20 of the strongest sources are currently being monitored on a daily basis as part of standard BATSE operations. We discuss observations of the Crab Nebula, Cen A, and the Galactic center as examples of the current BATSE capabilities.

Beschreibung: The Arthur Holly Compton Gamma Ray Observatory (Compton) was launched by the Space Shuttle Atlantis on 5 April 1991. The spacecraft and instruments are in good health and returning exciting results. The mission provides nearly six orders of magnitude in spectral coverage, from 30 keV to 30 GeV, with sensitivity over the entire range an order of magnitude better than that of previous observations. The 16,000 kilogram observatory contains four instruments on a stabilized platform. The mission began normal operations on 16 May 1991 and is now over half-way through a full-sky survey. The mission duration is expected to be from six to ten years. A Science Support Center has been established at Goddard Space Flight Center for the purpose of supporting a vigorous Guest Investigator Program. New scientific results to date include: (1) the establishment of the isotropy, combined with spatial inhomogeneity, of the distribution of gamma-ray bursts in the sky; (2) the discovery of intense high energy (100 MeV) gamma-ray emission from 3C 279 and other quasars and BL Lac objects, making these the most distant and luminous gamma-ray sources ever detected; (3) one of the first images of a gamma-ray burst; (4) the observation of intense nuclear and position-annihilation gamma-ray lines and neutrons from several large solar flares; and (5) the detection of a third gamma-ray pulsar, plus several other transient and pulsing hard X-ray sources.

Beschreibung: We are conducting a search for emission-line objects at large redshifts, ostensibly young and forming galaxies. Our method is to search for strong line emission, in particular Ly-alpha, using two techniques: a direct, narrow-band imaging search using a Fabry-Perot interferometer; and a serendipitous long-slit spectroscopic search. Assuming that none of the faint candidates found so far are actually primeval galaxies, we can set the strongest limits to date on the surface density of Ly-alpha-luminous primeval galaxies on the sky. Some of the faint emission line galaxies detected in our survey at z roughly 0.5 - 1 may be representative of the faint blue galaxy population detected in deep continuum imaging surveys.

Beschreibung: The use of SAR data to study geologic processes for better understanding of recent tectonic activity and climate change as well as the mitigation of geologic hazards and exploration for nonrenewable resources is discussed. The geologic processes that are particularly amenable to SAR-based data include volcanism; soil erosion, degradation, and redistribution; coastal erosion and inundation; glacier fluctuations; permafrost; and crustal motions. When SAR data are combined with data from other planned spaceborne sensors including ESA ERS, the Japanese Earth Resources Satellite, and the Canadian Radarsat, it will be possible to build a time-series view of temporal changes over many regions of earth.

Beschreibung: SPOT panchromatic imagery is used to measure subresolution horizontal terrain displacements that are associated with earthquakes, sand dune migration, coastal processes, and glacial motion. The approach is aimed at detecting and measuring surface processes by statistically matching the radiometric patterns in the data that differ spatially in a consistent direction over many pixels. Data obtained from the satellite-derived imagery can facilitate the understanding of natural hazards and the determination of the rates of many environmental processes worldwide.

Beschreibung: Discussed is a key element in the processing of topographic radar maps acquired by the NASA/JPL airborne synthetic aperture radar configured as an across-track interferometer (TOPSAR). TOPSAR utilizes a single transmit and two receive antennas; the three-dimensional target location is determined by triangulation based on a known baseline and two measured slant ranges. The slant range difference is determined very accurately from the phase difference between the signals received by the two antennas. This phase is measured modulo 2pi, whereas it is the absolute phase which relates directly to the difference in slant range. It is shown that splitting the range bandwidth into two subbands in the processor and processing each individually allows for the absolute phase. The underlying principles and system errors which must be considered are discussed, together with the implementation and results from processing data acquired during the summer of 1991.

Beschreibung: In the central Namib Desert, dune-free surfaces are separated abruptly from a sea of yellow and red sand dunes at the Kuiseb River canyon. The off-white hues of the dune-free area result from anomalously high surficial gypsum enrichment. Satellite imagery indicates that the gypsum surfaces are associated with lower surface maximum temperatures than those of the darker dune surfaces to the south. One of various sources of sulfate for the gypsum bodies is oceanic H2S, supplied to desert land-surfaces by regular fog incursions. Since fog events are widespread along the coast, the question of anomalous gypsum accumulations north of the dune sea arises. Satellite imagery, in conjunction with more detailed handheld photography from the space shuttle, indicates that the penetration of fog inland is significantly greater over the gypsum surfaces than it is over the dunes. It is postulated that the thermal gradient between these surfaces generates a heat low centered over the northern part of dune sea and that this enhances fog and H2S advection on its north side onto the nearby dune-free zone. In such a system, gypsum/caliche surfaces reinforce advection of fog over themselves in a positive feedback mode.

Beschreibung: A method for using congruent aircraft-satellite observations to calibrate a satellite sensor is presented. A calibrated spectroradiometer at an altitude of 19 km above White Sands, NM, is oriented to view White Sands at the satellite overpass time along the same view vector as the satellite sensor. Collected data are transformed into corresponding estimates of sensor band radiance at the satellite (derived from the aircraft measurements), and average count (from the sensor measurements). These are both averaged across the footprint of the spectroradiometer. Results are presented for the evolution of NOAA-11 Advanced Very High Resolution Radiometer (AVHRR) (Bands 1 and 2) gain between November 1988 and October 1990, and for GOES-6 and GOES-7 VISSR/VAS visible bands during the same period. Estimates of uncertainty in the results are presented, as well as ideas for their reduction in future flights.

Beschreibung: The inversion of the leaf area index (LAI) canopy parameter from optical spectral reflectance measurements is obtained using a backpropagation artificial neural network trained using input-output pairs generated by a multiple scattering reflectance model. The problem of LAI estimation over sparse canopies (LAI 〈 1.0) with varying soil reflectance backgrounds is particularly difficult. Standard multiple regression methods applied to canopies within a single homogeneous soil type yield good results but perform unacceptably when applied across soil boundaries, resulting in absolute percentage errors of 〉1000 percent for low LAI. Minimization methods applied to merit functions constructed from differences between measured reflectances and predicted reflectances using multiple-scattering models are unacceptably sensitive to a good initial guess for the desired parameter. In contrast, the neural network reported generally yields absolute percentage errors of 〈30 percent when weighting coefficients trained on one soil type were applied to predicted canopy reflectance at a different soil background.

Beschreibung: The fraction of photosynthetically active radiation (PAR) absorbed by a vegetated canopy (APARc) or landscape (APARs) is a critical parameter in climate processes. A grassland study examined: 1) whether APARs can be estimated from PAR bidirectional exitance fractions; and 2) whether APARs is correlated with spectral vegetation indices (SVIs). Data were acquired with a high resolution continuous spectroradiometer at 4 sun angles on grassland sites. APARs was computed from the scattered surface PAR exitance fractions. The nadir APARs value was the most variable diurnally; it provided a good estimate of the average surface APARs at ~95 percent. APARc was best represented by exitance factors between 30-60* forward.

Beschreibung: The NASA/Jet Propulsion Laboratory Airborne Synthetic Aperture Radar (JPL AIRSAR) system has now completed four flight campaigns. The authors describe the current state of this system and provide insight into how flight seasons are planned for this instrument. The data processors and data products are described. A table containing relevant system parameters is provided.

Beschreibung: Preliminary results from an analysis of the multitemporal radar backscatter signatures of tree species acquired by European Remote Sensing Satellite (ERS-1) synthetic aperture radar (SAR) data are presented. Significant changes in radar backscatter are detected. Correlation of these differences with ground truth observations indicate that these are due to changes in soil and liquid water content as a result of freeze/thaw events. C-band observations acquired by the NASA/Jet Propulsion Laboratory Airborne SAR (JPL AIRSAR) instrument demonstrate the potential of a C-band radar instrument to monitor drought/flood events. The potential of ERS-1 for monitoring phenologic changes in the forest and for classifying tree species is less promising.

Beschreibung: An experiment that has been performed to verify the relationship between the dielectric constant of several tree species and their respective water potentials is described. The water potential, xylem flow and dielectric properties of five tree species were continuously monitored while simultaneously manipulating canopy transpiration and water status. An analysis of the data recorded during these manipulations is presented. Results of this analysis demonstrate a clear coincidence of change in dielectric constant and water status. The implication of this relationship for the utilization of remotely sensed data to study canopy water relations is explored. Preliminary backscatter modeling results demonstrate that the changes in dielectric constant that occur as a result of changes in water status are significant enough to be observable with microwave radar.