ALBERT

Notes: The paper traces the history of the Wild series of rectifiers, paying particular attention to the mechanical solutions of the Newton and Scheimpflug conditions.

Notes: This paper gives a summary of the methods that have been used for independent model aerial triangulation. A modification of one of the methods is proposed and the paper concludes with a comparison of the independent model with the classical method of triangulation.

Notes: The camera is a further development of an existing type with greatly improved photogrammetric performance so that the photography can be used with first-order plotting machines. A new lens provides minimal distortion, high resolution and greatly improved marginal illumination. An entirely new shutter provides high speeds and efficiency. Laboratory results and preliminary survey trials indicate image quality and location standards of the same order as established existing cameras.

Notes: Book reviews in this article:INTERNATIONAL YEAR BOOK OF CARTOGRAPHY (Vol. IV, 1964). Editor, Eduard Imhof.JUBILEE VOLUME DEDICATED TO WILLEM SCHERMERHORN ON HIS SEVENTIETH ANNIVERSARY: ESSAYS ON THE DEVELOPMENT OF PHOTOGRAMMETRY. Published by I.T.C., Delft.

Notes: The geologist's use of air photographs and the characteristics studied by photogeologists are briefly described. The influence of photographic factors such as scale, season, time of day, film type, processing, overlap and dimensional accuracy are considered from the geologist's viewpoint.

Notes: This paper modifies the well-known formula that corrects x-parallaxes for tilt. It shows how we can make significant improvements in accuracy with a no more complicated formula, in which the effects of ground relief are completely removed; and how we can reduce the second-order errors due to lateral (w) tilts by very large factors in favourable cases.

Notes: Land systems are patterns of landscape recognised on aerial photographs and mapped to define areas of similar terrain with a similar environment. Breaks of slope often form the major boundaries both between and within land systems. They can be usefully mapped from aerial photographs even if their significance can only be deduced after ground investigation. Many of the characteristics of land systems can be appreciated from aerial photographs and measurements made on the photographs can improve their quantitative description.

Notes: A method of slotted templet triangulation is described in which the authors have used photographs printed on a stable base as the templets. The advantages, disadvantages and possibilities of the method are discussed.

Notes: The paper gives, for a large number of cases, numerical errors due to using approximate, first-order, formulae for correcting x-parallaxes for tilt. The figures show that the errors are considerably smaller than might be expected. It is also shown that the root mean square of the four tilts of a pair of pictures is a reliable measure from which the effect of tilt on heights can be estimated with some confidence.

Notes: Research work is being undertaken by the Department of Orthodontics at Addenbrooke's Hospital, Cambridge, which involves studying the growth of children's faces in three dimensions. In evaluating the morphology of soft tissues, the advantages offered by photogrammetry have been recognised and this paper describes how the technique has been put into practice at the hospital where a stereometric instrument, equally suitable for use as a camera or as a projection plotter, has been constructed.

Notes: The history of the Argentine-Chile frontier is briefly reviewed. The paper then describes the photogrammetric and land-surveying work that formed part of the recent settlement of a section of the frontier, that was referred to the British Government for arbitration.

Notes: Topics of immediate practical interest formed the basis of the Address. Particular emphasis was placed upon problems of point transfer, pre-marking of ground control points, aerial triangulation by observation of independent models, and the status of photogrammetric operators.

Notes: The article describes a method of strip aerial triangulation using the Wild B8 plotter. The principal feature of the method is the transfer of exterior orientation of a camera by measurement of outer orientation parallel to successive airbases.

Notes: After a brief review of the history of the orthophoto mapping process and its methods, the paper describes the automatic production of orthophotographs in the BS-Stereomat. Technical details, especially of the electronics of the instrument, are given. The range of applications of an orthophoto is discussed, as well as the method's limitations.

Notes: Equipment manufactured in connexion with the special applications of photogrammetry has developed from very early designs, often with remarkably few changes. The first section of the paper traces this evolution up to the present time.Architectural photogrammetry has been, since Meydenbauer, one of the most important of these special applications and the second part describes some recent work of this type in England and Jordan.

Notes: The problem of incorporating airborne auxiliary data into an aerial triangulation block adjustment is considered. The conclusion is reached that this problem can be most readily solved by the use of a fully rigorous adjustment method. The first order adjustment equations for all types of airborne auxiliary control are developed and the method of incorporating these equations into the block solution is demonstrated. The general computing problems of the aerial triangulation block adjustment are briefly discussed and a method outlined for the incorporation of tie strips, at any angle across the block, into the adjustment without unduly increasing the storage requirements for the solution. The problem of correctly weighting the different types of available data is discussed. The paper concludes with a demonstration of the improved accuracy possible if precise aerial triangulation data are combined with apparently crude absolute airborne data.

Notes: The author explains one of the chief problems, the composition of a survey aircraft navigation system, facing Commission I of the International Society for Photogrammetry. The tasks to be accomplished by such a system are outlined, and some of the alternative equipment available to carry out the various aspects of this work are discussed.

Notes: It is well known that there exists a “danger cylinder” for space resection, analogous to the “danger circle” in the plane, on which the resection is unstable. This paper shows how the existence of this surface may be detected and draws attention to the way in which the instability differs from that in the plane.

Notes: A successful attempt has been made to produce design plans of large chemical plant using photogrammetric techniques, and involving the development and modification of cameras and plotting equipment. Photogrammetry has provided a solution to a problem which could not easily be solved by direct methods.

Notes: Book reviews in this article:PROCEEDINGS OF THE SECOND NATIONAL CONFERENCE OF SOUTH AFRICAN SURVEYORS, FEBRUARY 1964. Edited by G. H. Menzies et al.

Notes: Four authors review the activities of the seven Commissions of the I.S.P. at the Xth International Congress, Lisbon, 1964.

Notes: This paper discusses a simple method of computing independent strips under certain reasonable approximations. It is shown that, if the method is regarded as if it were computation by polynomials, the order of the polynomial is decided by the nature of the control provided and not by the number of controlled models. This conclusion should throw some light on the vexed (and perennial) problem of the choice of orders for polynomials.

Notes: An attempt is made to review the factors affecting the use of colour photography in photogrammetry and photo-interpretation. Examples of current practice and results of comparative tests are quoted, as well as the advantages and deficiencies of the various materials available.

Notes: During the summer of 1965, colour, false colour, infra-red and panchromatic photography was flown of the Breidamerkur Glacier area in south-east Iceland. Subsequent comparative interpretation studies of the film types have indicated that colour photography is superior for the interpretation of glacierized† areas. This is attributed to brightness qualities and a continuous colour tone range, which, in this instance, closely matched visual representation of ground objects.The false colour film, due to the striking tonal qualities of vegetation and moisture, is considered best for studies involving the delimitation of these features. Panchromatic film appears to be satisfactory for general interpretation work, particularly where the utmost in definition is called for. The infra-red film, because of the dark tones produced by gravels and the subsequent high contrasts between ice and gravel debris on the ice surface, is considered a poor choice for the interpretation of glacierized areas.

Notes: This paper gives convenient formulae for numerical relative orientation for use with instruments in which the Y-parallax may be accurately measured.

Notes: Rather than rely on laboratory calibration, test fields have been established in Sweden to enable photography from a tower or aircraft, and so simulate as nearly as possible actual operational conditions. Repeated experiments, followed by analysis of photography, and the application of statistical tests, have allowed the geometrical quality of the aerial photograph to be assessed, and systematic and irregular errors to be distinguished.

Notes: It does not seem to be widely recognised that the solution of the space resection problem from measurements made on a single photograph of three ground control points is not unique. There are, in general, four solutions, so that either the camera orientation must be approximately known (as is the case for near vertical photography) or extra control must be used to discriminate between these solutions. The iterative solution commonly used will only yield one solution, which will be correct if the photography is nearly vertical, but which is liable to be wrong in the general case. An explicit solution is therefore preferred since all solutions may be examined in the light of such extra control as is available. This paper gives a method for such a solution and shows how the discrimination should be used. The paper goes on to derive a method of adjusting the result to redundant control by least squares.

Notes: New sanitary landfills are being opened each day to accommodate the rising volume of solid wastes. Selection of proper sites is a very major part of the disposal problem, particularly as they might affect the surrounding surface and ground water.Leachate production is inevitable in the humid East and throughout most of the country. Several alternatives are suggested that would result in the assimilation of migrating leachate into, the environment at tolerable limits or for its renovation prior to final discharge: Alternative 1—knowledge of existing hydrogeologic conditions which would favorably control the rate and direction of leachate migration; Alternative 2—engineering the landfill by construction of low-cost facilities to collect and treat leachate; and Alternative 3—construction of limited collection facilities to supplement natural conditions.It is suggested that more emphasis be given to hydrogeologic factors in the selection of refuse disposal sites to insure protection of surrounding surface and ground water. It is time to approach the waste disposal problem on a more sophisticated level by requiring test drilling, monitoring, and by giving consideration to the engineering of, landfills so that man's health and' environment are not jeopardized.

Notes: A simple and rapid method of determining casing length and permeable zones in wells tapping bedrock can be useful to well drillers and hydrologists. A device consisting of a galvanometer, a reel of insulated wire, and a copper electrode locates the casing depth, changes of lithology, and permeable zones. The small-diameter electrode permits measurement through well-seal access ports avoiding the expensive and time-consuming procedure of removing the seal and drop pipes to measure casing depth with a magnet. The measured electromotive force changes rapidly when the electrode passes the end of casing. Thus, the depth of casing is easily determined from the length of wire payed out. Changes in electromotive force measured within the uncased part of a well frequently indicate permeable zones, thereby aiding in choice of the most efficient drop-pipe length, and also yielding useful information for hydrogeologic studies.

Notes: The best features of analog and digital computers were combined to make a management model of a stream-aquifer system. The analog model provides a means for synthesizing, verifying, and summarizing aquifer properties; the digital model permits rapid calculation of the effects of water-management practices. Given specific management alternatives, a digital program can be written that will optimize operation plans of stream-aquifer systems. The techniques are demonstrated by application to a study of the Arkansas River valley in southeastern Colorado.

Notes: Underground detonations may produce observable effects in surrounding aquifers and wells. The nature and the duration of the effect at any observation point seem to depend on several factors such as the amount of energy released by the detonation, the geologic environment, the position of the buried explosive device in relation to the saturated zone, aquifer characteristics, and the distance from point of detonation. Precise measurement of these effects in wells presented numerous technical problems and resulted in the development of specialized techniques. Initially, these effects were observed by measuring the fluctuation of the free water surface in wells. The current technique employs high-resolution pressure transducers deep in the water column. Pneumatic packers may be used to restrict the movement of water into the well. Data are recorded on high-speed oscillographs.

Notes: Present ground-water use in Ohio, approximately 650mgd (million gallons per day) amounts to about 5 percent of the water that enters the ground-water reservoirs. The largest ground-water supplies are developed where natural concentrations of water occur, chiefly in the watercourse aquifers, which consist of sand and gravel of glacial origin (outwash) in the valleys of the major streams. Other important aquifers are glacial outwash in upland areas and in the buried Teays Valley system, the limestone and dolomite aquifers in western Ohio, and sandstone and shale aquifers in the eastern half of the State.Future outlook is that more of the increasing water demand will be met from ground-water sources. Ground-water supplies will be developed at many new sites, and aquifers in areas already heavily pumped will be made to yield more water by the drilling of additional wells and recharging the aquifers artificially. Large quantities of ground water in storage, virtually unexploited, could be used for temporary low-flow augmentation of streams. Management of ground-water resources will be needed to help solve supply and distribution problems, and to resolve conflicts between users. Among future problems will be those arising from underground disposal of wastes, a practice which is expected to grow substantially from enforcement of water-quality standards for streams, set under the Federal Water Quality Act of 1965.

Notes: Pumping test data from a single well were used to estimate aquifer volume affecting drawdown. After four days of pumping from a 240 feet thick welded tuff aquifer in southern Nevada, the volume of the wedge-shaped mass tested was estimated to be about 15.6 billion cubic feet (440 million cubic meters). The field coefficient of permeability of the aquifer is 275 gallons per day per square foot.

Notes: In Southern California's San Bernardino Valley a unique experiment is being performed by a local water district, the State government, and a private industry. Both the experiment and the organizational arrangements for getting the job done are the subject of this paper. The experiment is the application of systems analysis technology to water resource management. The organization is formed by a combination of contracts and cooperative agreement between private and government agencies. The result is a favorable environment for the development of effective water resource management strategies.The San Bernardino Valley is similar Co many areas in the world where water resource management reduces to the allocation of locally available ground water and potential imported water resources. This paper outlines in detail the analysis tools and long-range planning needs of effective ground-water management strategies.

Notes: Coal mining in Appalachia has degraded both the surface and ground water. During mining, ground water is drained from the rocks and the pyrite associated with the coal beds is exposed to air. Oxidation of the pyrite produces high iron ana sulfate concentration and a low pH in the water. Some of this polluted water flows directly into nearby streams and some moves into the ground-water system. When the latter occurs, the iron concentration can increase up to several hundred mg/1 and the sulfates to over one thousand mg/1. Unfortunately, in most cases the cessation of mining does not stop the ground-water pollution, and it can take many decades before the ground water again becomes usable.A detailed study of the effects of coal mining on ground water was conducted in the Toms Run drainage basin in northwestern Pennsylvania where coal mining and oil and gas well drilling have occurred for almost 100 years. The rocks of Mississippian and Pennsylvanian Age produce a multiaquifer system–three major aquifers separated by siltstone and shale beds (aquitatdes). The oil and gas wells act as a conduit system permitting acid mine drainage to move downward from the strip mines to underlying aquifers. It then moves laterally down dip and discharges as springs. The acid mine drainage adversely affects the ground-water quality by increasing the iron and sulfate content of the water especially in the vicinity of the strip mines.

Notes: The measure of earth resistivity is a possible means of detecting and outlining zones of ground-water contamination where a resistivity contrast exists between contaminated and unconcaminated ground water.As a preliminary evaluation of the use of electrical resistivity for defining zones of contaminated ground water, five sites on Long Island and three sites in western Texas were examined. The surveys at three of the Long Island sites and at one of the western Texas sites were at least partially successful in their objectives. The lack of success at the other sites is attributed to the particular physical conditions that existed.Further effort toward developing electrical resistivity as a method for evaluating variations in ground-water quality is encouraged.

Notes: An aquifer test and analyses of water samples, showed that the anomalous water quality of a municipal well was caused by leakage from a nearby abandoned well tapping another aquifer.

Notes: Electric-analog or digital-computer models are used to compute the effect of ground-water withdrawal or recharge on streamflow. The results can be generalized on a map showing lines of equal elapsed time. The lines indicate the time of recharging or discharging that is needed to affect the streamflow by a given fraction of the amount pumped or injected. The generalization is based on the similarity in shape of the relations between pumping time and stream depletion for (1) semi-infinite homogeneous aquifers drained by a straight, fully penetrating stream, and (2) complex heterogeneous aquifers. Response curves from a model reflect the combined effect of stream sinuosity, irregular impermeable boundaries, areal variation in aquifer properties, and imperfect hydraulic connection between the stream and aquifer. The elapsed-cime lines are identified by sdf (stream depletion factor) values. These values can be calculated from observations made on an electric-analog model and then may be used in a digital-computer program for determining the effects of ground-water pumping or recharge on streamflow.

Notes: Hydrologic systems in arid lands normally include a recharge area in mountains and a discharge area in lowlands often with an intermediate area of lateral flow between recharge and discharge areas. This system is often modified by local geologic, climatic, and physiographic factors. Most water-supply, contamination and disposal problems arise from a combination of features superimposed on this system by concentration of population and agricultural activity in the discharge areas. Also most of our data on the system comes from the lowlands and little data is available from the recharge areas.In the Great Basin two general categories of ground-water flow systems are recognized: (1) local flow systems where drainage areas are usually small, flow paths are relatively short, interbasin flow is uncommon, springs have large fluctuations in discharge, water temperature is low, and concentration of Na, K, Cl, and SO4 is low, and (2) regional flow systems, where drainage areas are large, flow paths long, interbasin flow common, springs have large discharge, and the water is characteristically of higher temperature and contains higher concentrations of K, Na, Cl, and SO4. Hydrologic approaches used, in addition to conventional methods, include hydrologic budget, water-potential, and water-chemistry studies. Although detailed delineation of most flow systems in Nevada has not been accomplished, integration of hydrologic, geologic, and chemical methods allow approximate portrayal of many systems, both local and regional.Adequate methods upon which to base planning for optimum development of water resources in desert basins are now available. A conceptual model of optimal ground-water reservoir development illustrates how to determine optimum use of storage and perennial yield provided the use to which the water is to be put and the time of withdrawal are known.

Notes: In 1965, a ground-water recharge facility was constructed and placed in operation to forestall an impending water shortage at Minot, North Dakota. The facility is unique in that the rate of recharge to a buried sand and gravel aquifer is augmented by perforating an overlying bed of clay using hydraulic connectors (gravel-filled bored holes) in conjunction with an open-pit excavation. The connectors were drilled by typical well-boring techniques and the open pit was excavated by common construction methods. The recharge technique made it possible to add about million gallons per day of water to underground storage with a total capital investment of about $200,000. The alternative originally proposed was a 50-mile long pipeline to Garrison Reservoir, at a 1959 estimated cost of $12,000,000. The recharge technique employed at Minot should have wide application in the ground-water industry in areas where natural recharge to permeable deposits is impeded by overlying beds of low permeability.

Notes: A two-dimensional, passive element electric analog model was used to determine the spatial distribution of natural ground-water recharge in the Santa Cruz River basin of southern Arizona. Existing records were used to draw a ground-water level contour map of the area in its undeveloped condition. The model was made to duplicate these contours by varying inputs from known locations of recharge. Recharge distribution as determined by the model was consistent with previous estimates, but no direct correlation was found with the contributing drainage area.

Notes: The tidal efficiencies of wells tapping the principal artesian aquifer in Glynn County, Georgia decrease with distance from the influencing tidal body and also decrease with well depth. Although the magnitude of water-level fluctuation of these wells is largely dependent upon the distance to a large tidal body, the time of a high or a low water level in the wells is mainly dependent upon the time of a high or a low tide in a small, nearby tidal body. A modified formula for computing tidal efficiency is developed:〈displayedItem type="mathematics" xml:id="mu1" numbered="no"〉〈mediaResource alt="image" href="urn:x-wiley:0017467X:GWAT24:GWAT_24_mu1"/〉 From this formula, tidal efficiency can be calculated rapidly and easily

Notes: A totally new concept, called the Deep Tunnel Plan for Flood and Pollution Control, is being implemented by the Metropolitan Sanitary District of Chicago. The plan envisions temporary storage of combined sewer overflows in a system of tunnels excavated in solid rock, deep under the City. After the end of a storm, the stored water would be pumped to the surface where it would be treated to remove pollution before being discharged into the waterways.Early planning studies indicate that the most favorable location for the tunnels is the Galena-Platteville Dolomite which is the uppermost member of the Cambrian-Ordovician aquifer. The protection of this highly-developed aquifer from any possible contamination is therefore mandatory for the feasibility of the Deep Tunnel Plan.Preliminary investigations using an electric analog model, constructed on the basis of available data, indicate that aquifer protection can be provided by a system of recharge wells which would maintain flow into the tunnels at all times. Further detailed studies are in progress to verify and refine those preliminary conclusions. These studies include (a) detailed exploratory drilling; (b) controlled aquifer tests in selected zones; (c) pumping tests for specific capacity in the zone to be tunneled; (d) recharge injection tests; and (e) analog model analysis for future effects of the tunnels and recharge operations.

Notes: The interdisciplinary graduate program in hydrogeology at the University of Idaho is described. The curriculum is structured to permit the design of individual study programs which are in keeping with multiple use concepts. Flexibility sufficient to permit courses to be taken in several fields which support the students' major area of research is provided. This flexibility is maximized by the offering of two degree options. Discussion of a number of the research projects at the University illustrates several of the types of problems now being studied.

Notes: The University of Connecticut well field is located in a sand and gravel ice-contact stratified drift aquifer which fills the Fenton River valley to a depth of about 60 feet. The water that supplies these wells consists of captured ground-water underflow which would normally discharge into the Fenton River, and water induced directly into the aquifer from river flow by pumping. Measurements of streamflow made at three weirs installed in the Fenton River adjacent to two of these pumped wells show the influence of wells on streamflow. Approximately 34 percent of the water pumped from the wells was stolen from the river via induced streambed infiltration, although this figure varies in accordance with pumping. Water-level measurements in 30 observation wells installed in the aquifer around the pumped wells show that the cones of depression spread underneath the river, following coarse-grained partially buried eskers. The fact that the water table is detached from the river and is below the streambed near the pumped wells is explained by the low vertical permeability of the streambed in contrast to the horizontal permeability of the rest of the aquifer. The streambed is unable to recharge the aquifer with as much water as the aquifer can carry away. Time-drawdown pumping test plots show no effect of the river.

Notes: A resistance network analogue is used to study the early stages of a pumping test in an unconfined aquifer. The results are compared with an alternative analysis due to Boulton (1965) and a good agreement is obtained.Unlike the theoretical analysis the analogue technique is versatile and can easily be used to study pumping tests with nonidealized boundary conditions, e.g., partially penetrating wells can be simulated. Thus the analogue method of analysis could prove to be a more realistic method for studying pumping tests than standard analytical techniques.

Notes: Coarse granular deposits in preglacial river valleys are an important source of ground water on the Canadian prairies. Such an aquifer can commonly be modeled by an infinite-strip leaky-artesian aquifer. Test results can be analyzed, future drawdowns predicted, and safe yields estimated by applying the standard leaky-artesian formula in conjunction with image-well theory, making due allowance for well-loss factors.This paper develops basic formulas required for safe yield estimation for an array of n wells located on the axis of an infinite-strip leaky-artesian aquifer. In general, determination of safe yield for each well depends on the solution of n simultaneous linear or nonlinear equations. For certain symmetrical arrays, however, the number of equations to be solved is approximately halved. A linear equation will apply for any well if flow adjacent to the well bore always obeys the Darcy law for all pumping rates of interest. If all n equations are linear, they may be solved by the methods of matrix algebra; if not, a trial-and-error solution must be adopted.The method is illustrated by an application to a 6-mile stretch of a buried-valley aquifer near Edson, Alberta. The numerical coefficients in the system of equations are first derived and the equations then solved to obtain estimated 20-year safe yields for well arrays containing up to 38 equally spaced wells.

Notes: In 1966 more than 50 billion gallons of water was pumped daily from an estimated 10 to 15 million water wells in the United States. This was more than one-sixth of the national withdrawal of water. On the basis of past rates of increase, a much greater future use of ground water is suggested. Our annual investment in water wells is one-half to three-quarter billion dollars, not including pumps and plumbing. In 1964 approximately 436,000 new wells were drilled; however, less than 1 percent of these wells were logged by any geophysical means. The application of _ge_o.phy.sical well logging to ground-water hydrology is comparable to its use in petroleum exploration in the 1930's; however, we can take advantage of equipment and interpretation techniques developed in the oil industry that are available now for use in ground-water investigations.Although most petroleum well logging techniques may be utilized in hydrology; modifications in equipment and interpretation are necessary because of basic economic and environmental differences between petroleum and ground-water evaluation. If logging is to be widely applied to ground-water exploration and evaluation, the expense of equipment and services must be reduced. Fortunately, this can be accomplished, because most water wells are not as deep as oil wells and the temperatures and pressures are lower.The Water Resources Division of the U. S. Geological Survey is conducting research on the application of borehole geophysics to ground-water hydrology. The following logging devices are utilized in the evaluation of ground-water environments: spontaneous potential, resistivity, gamma, gamma-gamma, neutron, radioactive tracer, flowmeter, caliper, fluid resistivity, gradient and differential temperature, and sonic velocity. Lightweight logging sondes and control modules are operated by one man, either on a vehicle-mounted 6,000-foot logger or on a suitcase-mounted 500-foot logger. An inexpensive magnetic tape system has been developed and is used routinely for log recording and playback.If commercial well logging service is to be widely used in ground-water exploration and development, water well contractors, and State and municipal agencies must be educated on the advantages of obtaining more information from each hole drilled. It will be necessary also to demonstrate how well logging can provide much of this information. In addition, the well logging industry must adapt their equipment and services to the requirements of ground-water hydrology. The need for additional logging capability in this field exists at the present time and is expected to increase. Hopefully industry will be able to fill the gap.

Notes: A shallow, wide spread perching layer was isolated in the alluvial profiles of western Fresno County, California. Geologic and hydrologic interpretations are given, based on field and laboratory measurements of the physical properties of this layer. Some of the approaches investigated included using existing electrical logs from irrigation wells, head loss observations in wells and piezometers, core drilling, and core analysis. Differences in alluvial profile permeabilities are shown which result in perched water under the existing field flow conditions. The quantity of vertical flow through the layer is estimated using core permeabilities and hydraulic gradients observed in the field.Hydraulic properties and descriptions for the perched zone are presened which can be used to delineate profile flow limitations at other locations in the San Joaquin Valley. The study may be used in estimating the rate at which this perched water table could rise If, in the future, imported water and changes in irrigation patterns cause a large quantity of water to flow vertically.

Notes: The most commonly practiced method of artificial recharge at present is through basins. This spreading method may not be physically feasible or practicable if land values are high or a shallow, densely compacted layer forms a barrier impeding the direct downward percolation of the ponded surface water.For the case of the latter condition, alternative methods of wells or trenches dug down to the pervious aquifer and backfilled with gravel have been investigated. These were explored from the standpoint of construction and operating cost and hydraulic efficiency as influenced by such factors as the depth to the aquifer, the thickness, depth of saturation, permeability and specific yield of the aquifer, interference of closely spaced wells and duration of continuous operation of the wells or trenches. Furthermore, effects of bacterial growth and chemical composition of the recharge water on the hydraulic performance of wells or trenches are discussed.An economic comparison based on field conditions in a prospective recharge site at Stockton, California, is used to illustrate the developed criteria for relative effectiveness of the two methods.As a general conclusion, it was found that while recharge through trenches would be more efficient hydraulically and economically for the case of very shallow subsurface barriers, wells would become more competitive as the thickness of an impervious top layer increases.

Notes: The horizontal viscous flow model with “infinite” areal extent can be used for almost any well flow problem whether two-dimensional or three-dimensional, steady or nonsteady, single aquifer or multiaquifer. This model can also be used in the field of soil mechanics for subsurface drainage problems. The design includes scale model analysis and the application of conformal mapping techniques in order to simulate an ideal aquifer. Construction, calibration, and test procedures for the model are described. The apparatus has proved to be both a valuable research tool and an excellent teaching aid.

Notes: Water-supply problems in Spain have become acute during the past decade owing to expansion of industry, construction of modern houses and apartments, and development of a tourist industry. A training program in ground-water hydrology and geology was established three years ago in Barcelona to help supply personnel who would be able to cope with these problems. Training is also given to foreign nationals, a total of nine countries having been represented to date. Part of the success of the school rests on the fact that a large variety of ground-water problems exist in the vicinity of Barcelona. Students obtain a firsthand knowledge of sea-water intrusion, aquifer-testing techniques, agricultural and municipal degradation of water quality, and drilling and exploration techniques within a wide variety of rock types.

Notes: A well-designed and calibrated orifice meter is an accurate and inexpensive measuring device for flow. Endline orifices can be calibrated at work sites by solving an equation that interrelates easily measured dimensions of the orifice and outflow.

Notes: Expanding water requirements during recent years have intensified development of the productive sedimentary aquifers of the North Carolina Coastal Plain. The effects of this development emphasize the local and regional limitations of the aquifer system and the need for an effective management program.Withdrawal of about 60 million gallons per day from the Castle Hayne limestone, the most productive unit of the principal artesian aquifer of the area, began in July 1965 at a phosphate mine adjacent to the Pamlico River in Beaufort County. Within a few months, the artesian head was lowered below sea level in an area of about 800 square miles, and to more than 100 feet below sea level in the immediate vicinity of pumping. Under these conditions the aquifer became vulnerable to encroachment of saline water from (1) areas of natural occurrence of brackish water in the limestone member of the aquifer; (2) leakage of brackish surface water through the confining beds; and (3) vertical movement of brackish water from the underlying sand member of the aquifer.The dramatic and “overnight” effects of the large withdrawals at the mine site and the threat of damage to the aquifer created sufficient public concern so that legislation was passed by the 1967 General Assembly, giving the Board of Water and Air Resources authority to regulate ground-water withdrawals as needed to protect the aquifers of the State. An adequate management program can be accomplished that will not only protect the aquifer but will improve the development potential. The development of such a management program requires a thorough knowledge of the hydrology of the aquifer system, the objective of studies in progress. The implementation of the program will require the support of an informed public.

Notes: The planned development of an individual water supply from a group of wells must take into consideration several controllable and uncontrollable factors. The uncontrollable factors may include aquifer coefficients of transmissibility and storage, aquifer boundaries, static water level, aquifer depth, recharge capabilities, and competing users. The controllable factors often include the acreage allocated to ground-water development, well locations, and pumping rates. Well-field design is oriented mainly toward proper selection of the controllable factors.Water requirements, the cost of water and the life of the well field are related to limitations of acreage, draw-down of water level, and investment in pumping and transmission facilities. All of these factors, in turn, are influenced by the location of individual wells with respect to one another.Well-field design calculations involve the combined interference of water level drawdown among the various wells in the field. Repeated computational trials for various numbers of wells and well spacings may be required. Calculations using conventional methods are, in most cases, rather time-consuming.The final design decision can be approached quickly if it is assumed that the wells have regular spacing. Through the use of a simple formula and table developed in this paper, a given well-field problem can be calculated in a few minutes with a slide rule. When well spacing deviates appreciably from the regular spacing assumed, the final design calculations should be made with computer techniques.

Notes: This article contains a summary of a few disease out-breaks caused by ground-water contamination, and the difficulties in designing and monitoring for effective quality control. There is a discussion of problems associated with large basin recharge with treated sewage. For instance, do we have adequate microbial indicators? Or will the nitrate concentration build up if there is a semiclosed circuit involved? Chlorination of well water withdrawn for domestic use is advocated as good insurance for microbial control.

Notes: A new design method for deep well dewatering systems is given. The method analyses three dimensional flow to the multiwell systems by considering the two end points to the initial fast phase of water table fall. The method is applied to a dewatering case history and proves to be successful.

Notes: A new method of determining aquifer storage coefficients has been developed for use in operations involving ground-water recharge through wells. This work evolved from a research project dealing with the fate of DDT and nitrate in the Ogallala Aquifer in the High Plains of Texas.A tritium tracer was used to determine the detention time of the recharge water passing through a saturated volume of the aquifer. Tracer behavior was formulated ‘mathematically and verified by model simulation. The formulations provide a graphical solution for the detention time from which the storage coefficient may be calculated.The method will have immediate value in establishing storage coefficients of aquifers, such as the Ogallala, where plans for importation and distribution of supplemental water involve utilization of underground storage. Regarding water-table conditions, this method promises to produce more reliable storage values than have been obtained from pumping tests.

Notes: Heavy development in certain areas of the United States and the growing shortage of additional, readily available water supplies therein have forced planners and hydrologists to resort progressively to more elaborate water-supply systems. Among the most elaborate and most expensive systems proposed to date are the various plans for. transferring water toward the south from northward flowing Arctic rivers. A considerable portion of this water would be utilized for the expansion of already heavily urbanized areas.Meanwhile, many of the densely populated areas experiencing water shortages are subjected to other, perhaps more complex problems which appear to be, at least in part, a product of their increasing size. Therefore, the expenditure of large sums to supply them with water for indefinite growth appears to merit scrutinous study.An alternative approach designed to minimize both water diversion costs and problems associated with over-populated areas is the stimulation of development in carefully selected regions well endowed with water and other natural resources. One such area and several of its attributes are discussed herein.

Notes: A gravity survey covering 250 square miles and including the Walnut Gulch watershed at Tombstone, Arizona has been conducted. The watershed is one of the experimental areas of the Southwest Watershed Research Center, Agricultural Research Service in Tucson, Arizona.The gravity survey method was selected as the geophysical method that would give a regional picture of the subsurface geology before making extensive surveys by the seismic. refraction method. Basically, the gravity survey method detects and measures variations in the earth's gravitational force. These variations are associated with changes in rock and alluvium density near the surface. Many geologic structures of interest in watershed ground-water hydrology cause disturbances in the normal density distribution which give rise to anomalies.The geology of the watershed is typical of Basin and Range province and contains deep basin fill deposits surrounded on the east, south, and southwest by igneous intrusives, volcanics, and sedimentary rocks. Concealed border faults may have a decided effect on the hydrology of the watershed.Four base stations were established and 360 gravity stations occupied by a Worden Educator* gravimeter loaned from the Geophysics Laboratory of the University of Arizona. Bench marks and large scale topographic maps served as control. Raw field data were reduced to the simple Bouguer anomaly values through the use of a computer program.The gravity survey reveals a 16-mgal. gravity low over the east-central portion of the watershed. This low is interpreted as indicating that about 3200 feet of low density alluvium underlies the area at this point. Gravity highs are associated with mountain ranges and igneous plugs where the more dense rocks occur.

Notes: Recent increased interest in subsurface disposal of industrial liquid wastes in Illinois has shown the need for both geohydrologic and engineering criteria and State regulatory policies for evaluating proposed installations, with the object of protecting other resources, chiefly potable ground water.Favorable geohydrologic conditions–specifically the presence of a variety of permeable formations that contain nonpotable water and are well confined from shallow to great depth–make waste disposal by wells feasible in much of the southern two-thirds of Illinois. Natural safeguards permit disposal wells to be planned with conventional engineering precautions and only a minimal program of preoperational testing.In much of the northern third of the State, the permeable rocks contain potable water to great depth, and there is moderate to high development of the ground-water resource because of urban and industrial concentration. Exhaustive testing, substantial proof of acceptable site conditions, and incorporation of optimum engineering safeguards are considered necessary before the State regulatory agency can authorize installation.

Notes: Comparative costs of ground water were needed for comprehensive planning of water resources development in the Susquehanna River basin in order to appraise the feasibility of alternative sources of water supply. Log-normal plots on logarithmic-probability paper that represented specific capacities adjusted to 180 days of pumping were used to estimate well yields and costs of obtaining the ground water from each of 65 potential aquifers. The 25, 50, and 75 percent probability of occurrence of the specific capacities of successful wells were used in the calculations. The estimated well yields at these probabilities of occurrence were obtained using hypothetical well designs and selected drawdowns. Ground-water costs for the estimated or design yields were calculated using amortized costs of well construction, electrical power costs, and maintenance costs, all obtained from standard sources.The calculated well yields and costs for the 25 to 75 percent probability interval range from 15 to 9,000 gpm (gallons per minute) and from $0.004 to $0.11 per thousand gallons of design yield. The yields and costs group according to aquifer rock type. The calculated costs decrease with increasing well yield and the available yield depends upon the aquifer rock type available. Representative costs per thousand gallons of design yield for selected yields from aquifers composed of different rock types analyzed are: 50 gpm −$0.060 for shale and interbedded sandstone and shale, and $0.050 for metamorphic rock; 100 gpm - $0.043 or shale and interbedded sandstone and shale, $0.037 for metamorphic rock, and $0.032 for carbonate rock; 500 gpm—$0.020 for sandstone, $0.015 for carbonate rock, and $0.012 for glacial sand and gravel; and 1,000 gpm —$0.009 for glacial sand and gravel. Differences in cost to obtain the same yield from different rock types are primarily due to differences in electrical power costs as determined by differences in pumping water levels.If used with caution, the generalized yield and cost estimates for aquifer rock types may have usefulness in estimating ground-water costs and yields in similar humid areas. They are primarily useful for planning and comparative purposes, but not for the actual design of engineering Projects.

Notes: Hazards to ground water may result from adding to water which may infiltrate the soil, or to the soil through which water percolates, wastes from man's life processes; his industrial and commercial activity; or his use of water, fertilizers and pesticides in agriculture. From experimental data it is evident that particulate matter, including bacteria and viruses, do not move far with percolating water in a soil system. The chemical products of biodegradation of organic wastes, however, with a few exceptions such as phosphates, move quite freely and hence reach ground water. Since they are no different than the compounds found in ground waters the effect of domestic use of water is generally to increase the concentration of salts normally present in such waters. From the vast spectrum of compounds produced by the chemical industry and used in industry and commerce comes hazards to ground-water quality such as metal ions, phenols, tar residues, brines, and exotic organics which may through accident, carelessness or waste-water discharge contaminate ground water. Mineralization with nutrients and soluble soil fractions, and possibly, pesticide residues are the hazards from agricultural use. Leaching from solid waste landfills is possible under poor long-term management and might involve chemicals, iron, and various earth minerals. It is concluded that the most serious hazard is the buildup of dissolved solids to levels inimical to beneficial use.

Notes: In this paper, basic design principles for disposal wells are set out and then exemplified by discussion of two recently constructed wells for disposal of very corrosive refinery waste. One well is designed for 700 gpm of waste containing 4200 ppm hydrogen sulfide. The other is designed for 50 gpm of waste containing 32 percent hydrochloric acid. Both wells are in the Gulf Coastal Plain and are completed in a deep, unconsolidated fine sand containing salt water. Screens fabricated from exotic metals were incorporated in the design. Unique combinations of materials were used for the casing.It is pointed out that oil field type completions are often used in disposal well construction, which usually results in low specific injection capacity, high operation and maintenance costs, and short useful life of the hydraulic structure.