ALBERT

Beschreibung: This contribution presents the state of the art of economy-wide material flow accounting. Starting from a brief recollection of the intellectual and policy history of this approach, we outline system definition, key methodological assumptions, and derived indicators. The next section makes an effort to establish data reliability and uncertainty for a number of existing multinational (European and global) material flow accounting (MFA) data compilations and discusses sources of inconsistencies and variations for some indicators and trends. The results show that the methodology has reached a certain maturity: Coefficients of variation between databases lie in the range of 10% to 20%, and correlations between databases across countries amount to an average R2 of 0.95. After discussing some of the research frontiers for further methodological development, we conclude that the material flow accounting framework and the data generated have reached a maturity that warrants material flow indicators to complement traditional economic and demographic information in providing a sound basis for discussing national and international policies for sustainable resource use.

Beschreibung: Managing solid waste is one of the biggest challenges in urban areas around the world. Technologically advanced economies generate vast amounts of organic waste materials, many of which are disposed to landfills. In the future, efficient use of carbon containing waste and all other waste materials has to be increased to reduce the need for virgin raw materials acquisition, including biomass, and reduce carbon being emitted to the atmosphere therefore mitigating climate change. At end-of-life, carbon-containing waste should not only be treated for energy recovery (e.g. via incineration) but technologies should be applied to recycle the carbon for use as material feedstocks. Thermochemical and biochemical conversion technologies offer the option to utilize organic waste for the production of chemical feedstock and subsequent polymers. The routes towards synthetic materials allow a more closed cycle of materials and can help to reduce dependence on either fossil or biobased raw materials. This chapter summarizes carbon-recycling routes available and investigates how in the long-term they could be applied to enhance waste management in both industrial countries as well as developing and emerging economies. We conclude with a case study looking at the system-wide global warming potential (GWP) and cumulative energy demand (CED) of producing high-density polyethylene (HDPE) from organic waste feedstock via gasification followed by Fischer–Tropsch synthesis (FTS). Results of the analysis indicate that the use of organic waste feedstock is beneficial if greenhouse gas (GHG) emissions associated with landfill diversion are considered.

Beschreibung: In rural areas, access to electricity is required for better living standard, enhance income options and reduce population migration. In last decades, steady progress has been made but the status of electrification significantly varies across countries. In developing countries, about 1.6 billion people live without electricity and another 2 billion have access but to an unreliable extent. Large population also live in remote areas where extension of grid is not feasible, where people continuing to live under distress conditions. International projections reveal that number of un-electrified people will remain same by the year 2030 if similar pace of electrification is continued in future.From this perspective, the study describes what bigger countries such as India, China and Brazil are doing and where rural electrification stands in priority in a poor country like Ethiopia. Is off-grid technologies show an option for such remote locations" The two case studies of Vietnam and South Africa reveal that work carried out through external support in the absence of national policies. As a result, people have experienced the benefits of technologies but unable to retain them in long term. Electricity has given various advantages but poor affordability of the people hinders the acceptance of technologies in rural areas.The study shows the need of a framework to achieve the long-term support for rural electrification. A framework that could direct the national priorities, understands social, economic and environmental aspects of off-grid technologies, identify key areas to be strengthen, allocates the roles and responsibilities at different working levels, maintains a consistent flow of adequate finance, pursue regular monitoring process and incorporate the monitoring results, or, critical success factors into the national policies to make them more effective. Both macro- as well as micro-level approaches have been suggested in this study.

Beschreibung: After considerable improvements of wastewater treatment, the loads of nutrients and plant protection agents, deriving from agriculture and heavy metals from urban drainages effluents as well as from erosion of agricultural soils are the main sources of nutrients and harmful substances in the loads of water bodies. The targets of the project were on the one hand the analysis of the political and legislative framework of both policy fields and on the other hand the evaluation of several, selected water protection measures with regard to their contribution to reduce water pollution, their economical effects as well as their political enforceability. The focus was laid on diffuse water pollution caused by agriculture. As main reasons for the diffuse water pollution stagnating at high level, the analysis of the political framework identified a lack of implementation discipline of water law, followed by the fragmented and insufficient water protection legislation itself and the previous design of the common agricultural policy slanted towards increasing productivity. For the future co-operation of agricultural and water authorities in implementation of their reforms and better definition of "Good Farming Practice" are recommended. The second investigation level focuses on the analysis and assessment of selected measures to reduce the input of nutrients and plant protection agents. This part was done with help of calculation models focussing on the specific cost/benefit ratios for water protection. In detail the following measures have been analysed: decoupling of direct payments, coupling of livestock farming to areas, tax on mineral nitrogen, pesticide levy, buffer stripes alongside of watercourses, all season crop cover on arable land, soil cultivation procedures, changing the use of arable land, optimisation of animal nutrition, optimisation of manure storage and application, co-operative agreements, education and training. Co-operations and water protection related education and training can be highly recommended, since they improve knowledge and freedom of action. As the results on county level show, the measure "Decoupling of direct payments" would not lead to appreciable changes as far as the nutrient surpluses on farmland is concerned. "Coupling livestock farming to areas" would decrease the surpluses substantially. For this measure and Tax on mineral nitrogen, varying adaptation reactions could be expected depending on the regional specialisation in cropping or livestock farming areas. On single farm level the measures, protein adapted feeding, optimisation of manure storage and application showed the best cost-efficiency to reduce nutrient surpluses. All season crop cover on arable land and conservation tillage are highly efficient, too, and should be included in farming practice. A stronger limitation of livestock density could mean a reduction of manure, but the implementation of this measure would lead to high losses of income for farmers specialised in animal production. For reduction of diffuse water pollution caused by urban drainage political approaches as well as detailed technical measures are examined. In the area of urban drainage storm water management (especially infiltration and constructed wetlands), unsealing of paved areas and small wastewater treatment structures (for phosphorus reduction) showed best cost-effectiveness.

Beschreibung: The paper analyzes a Bolivian region for possible cultivation of the oil plant Jatropha curcas for sustainable biodiesel production in order to replace in part Bolivia's diesel imports. The specific site for this study is located in the dry region of Gran Chaco in Santa Cruz. The aim of this work is to analyse the potential of useable land and resources for sustainable biodiesel production from Jatropha without competition with edibles production using economic, environmental and social criteria. In addition the article introduces Jatropha as one of the preferred oil plants for biodiesel production in several countries and indicates its different uses. The recommendation to cultivate Jatropha for biodiesel production is based on an exploration of the possibility of land use in the selected region and the benefits Jatropha production could offer. In this manner a sustainable cultivation of Jatropha in the region of Gran Chaco is recommended to produce biodiesel and to improve some of the environmental problems facing the region.

Beschreibung: Sustainability as defined by the Brundtland Commission, is a composite and thus ambitious policy target. It comprises environmental, economic, social, and institutional criteria with equal importance. Because of this complexity the first step of a (Local) Agenda 21 process should be to develop a vision of a sustainable society - a "leitbild" - useful as a compass, not a road map (or, even worse, a blueprint), attached by indicators that help to measure progress, distance to target, and failures of plans or their implementations. In the following article a model is proposed how local sustainability indicators can be developed and how they can help to reduce the complexity of sustainability and to concretize a program for the Local Agenda 21. To get a practical impression of the theoretical presentation an example is given in the last part of the article. It shows the experiences made while developing sustainability indicators in the City of Iserlohn.

Beschreibung: Economy-wide material flow analysis (MFA) and derived indicators have been developed to monitor and assess the metabolic performance of economies, that is, with respect to the internal economic flows and the exchange of materials with the environment and with other economies. Indicators such as direct material input (DMI) and direct material consumption (DMC) measure material use related to either production or consumption. Domestic hidden flows (HF) account for unused domestic extraction, and foreign HF represent the upstream primary resource requirements of the imports. DMI and domestic and foreign HF account for the total material requirement (TMR) of an economy. Subtracting the exports and their HF provides the total material consumption (TMC). DMI and TMR are used to measure the (de-) coupling of resource use and economic growth, providing the basis for resource efficiency indicators. Accounting for TMR allows detection of shifts from domestic to foreign resource requirements. Net addition to stock (NAS) measures the physical growth of an economy. It indicates the distance from flow equilibrium of inputs and outputs that may be regarded as a necessary condition of a sustainable mature metabolism. We discuss the extent to which MFA-based indicators can also be used to assess the environmental performance. For that purpose we consider different impacts of material flows, and different scales and perspectives of the analysis, and distinguish between turnover-based indicators of generic environmental pressure and impact-based indicators of specific environmental pressure. Indicators such as TMR and TMC are regarded as generic pressure indicators that may not be used to indicate specific environmental impacts. The TMR of industrial countries is discussed with respect to the question of whether volume and composition may be regarded as unsustainable.

Beschreibung: Resource flows constitute the materials basis of the economy. At the same time, they carry and induce an environmental burden associated with resource extraction and the subsequent material flows and stocks, which finally end up as waste and emissions. A reduction of this material throughput and the related impacts would require a reduction of resource inputs. And breaking the link between resource consumption and economicgrowth would require an increase in resource productivity. Material flow analysis (MFA) can be used to quantify resource flows and indicate resource productivity. In this article, we study the available empirical evidence on the actual (de-)linkage of material resource use and economic growth. We compare resource use with respect to total material requirement (TMR) and direct material input (DMI) for 11 and 26 countries, respectively, and the European Union (EU-15). The dynamics of TMR, as well as of the main components are analysed in relation to economic growth in order to show whether there is a decoupling (relative or absolute) from GDP and a change of the metabolic structure in the course of economicdevelopment. DMI/cap so far only decoupled from GDP/cap in relative terms; that is, in most countries, it reached a rather constant level but - with the exception of Czech Republic - showed no absolute decline yet. TMR/cap was reduced in two high-income countries and one low-income country due to political influence. Changes in TMR were more influenced by hidden flows (HF) than by DMI. We analyse the dynamics of the structure and composition of TMR in the course of economic development. In general, the economic development of industrial countries was accompanied by a shift from domestic to foreign resource extraction. Different relations can be discovered for the share of biomass, fossil fuel resources, construction resources and metals and industrial minerals.

Beschreibung: Within one decade a fundamental choice will have to be made: Should the energy system follow the historical trends of risky and unsustainable energy use patterns? Or should it take the course towards sustainable development and climate protection, giving top priority to energy efficiency and to a broad mix of renewable energies? Both roads are technically feasible. "Back-casting"-scenarios could help to answer the question, what technological options are available for climate protection and how societal goals can be achieved in a cost-effective way. Lessons learned from world energy scenarios and possible implementation options will be discussed. A case study of the German Parliament ́s Enquete Commission on Sustainable Energy Systems will be taken as illustration. The analysis shows that sustainable energy systems can be financed and that economic growth can be decoupled from absolute levels of non-renewable energy consumption by stepping up energy productivity.

Beschreibung: Scenarios for the future of renewable energy through 2050 are reviewed to explore how much renewable energy is considered possible or desirable and to inform policymaking. Existing policy targets for 2010 and 2020 are also reviewed for comparison. Common indicators are shares of primary energy, electricity, heat, and transport fuels from renewables. Global, Europe-wide, and country-specific scenarios show 10% to 50% shares of primary energy from renewables by 2050. By 2020, many targets and scenarios show 20% to 35% share of electricity from renewables, increasing to the range 50% to 80% by 2050 under the highest scenarios. Carbon-constrained scenarios for stabilization of emissions or atmospheric concentration depict trade-offs between renewables, nuclear power, and carbon capture and storage (CCS) from coal, most with high energy efficiency. Scenario outcomes differ depending on degree of future policy action, fuel prices, carbon prices, technology cost reductions, and aggregate energy demand, with resource constraints mainly for biomass and biofuels.

Beschreibung: The material stocks in the anthroposphere are growing faster than ever due to urbanization and growing per capita use. Owing to the growing potential insecurity of raw material supply the evaluation of resources gains increasing attention. Despite growing utilization of anthropogenic deposits, ‘urban mining’ has not yet sufficiently been supported by specific exploration methods. An exploration method for anthropogenic deposits is proposed and described by application to the copper stocks of Switzerland. The method combines material flow analysis with a bottom‐up analysis of material stocks. The stock composition and temporal characteristics are analysed by surveys and literature analysis. The stock amounts to 269±31 kg capita -1 for the year 2000. The retrospective data are used as parameters to construct a dynamic stock model, which is calibrated by historical trade statistics. The potential for drafting scenarios is discussed. The stock situation in Switzerland is reviewed and compared with that of other regions.

Beschreibung: In the discourse about sustainable development, "constant natural capital" is frequently referred to as a criterion for ecological sustainability. But what is "natural capital"? The concept will be analyzed by presenting arguments in favour of using the term and different versions of sustainability (strong and weak). Subsequently, a critique of the "natural capital" concept is brought forward, from an ecological as well as from an economic perspective. Following this critique, the use of material inputs and the material input per unit of service (MIPS) as a measure for the environmental impact potential is suggested. Dematerialisation is understood to be an alternative management rule for sustainability. In conclusion, a change of perspective is proposed. Due to the conceptual and measurement problems associated with the "constant-natural-capital" criterion (which refers to a stock), it seems more reasonable from a scientific as well as from a practical perspective to add flows (i.e. material inputs) to a decision criterion for whether a development is sustainable or not.

Beschreibung: The enhanced use of biomass for the production of energy, fuels, and materials is one of the key strategies towards sustainable production and consumption. Various life cycle assessment (LCA) studies demonstrate the great potential of bio-based products to reduce both the consumption of non-renewable energy resources and greenhouse gas emissions. However, the production of biomass requires agricultural land and is often associated with adverse environmental effects such as eutrophication of surface and ground water. Decision making in favor of or against bio-based and conventional fossil product alternatives therefore often requires weighing of environmental impacts. In this article, we apply distance-to-target weighing methodology to aggregate LCA results obtained in four different environmental impact categories (i.e., non-renewable energy consumption, global warming potential, eutrophication potential, and acidification potential) to one environmental index. We include 45 bio- and fossil-based product pairs in our analysis, which we conduct for Germany. The resulting environmental indices for all product pairs analyzed range from -19.7 to +0.2 with negative values indicating overall environmental benefits of bio-based products. Except for three options of packaging materials made from wheat and cornstarch, all bio-based products (including energy, fuels, and materials) score better than their fossil counterparts. Comparing the median values for the three options of biomass utilization reveals that bio-energy (-1.2) and bio-materials (-1.0) offer significantly higher environmental benefits than bio-fuels (-0.3). The results of this study reflect, however, subjective value judgments due to the weighing methodology applied. Given the uncertainties and controversies associated not only with distance-to-target methodologies in particular but also with weighing approaches in general, the authors strongly recommend using weighing for decision finding only as a supplementary tool separately from standardized LCA methodology.

Beschreibung: The European Commission has established the Eco Management and Auditing Scheme (EMAS) to promote and institutionalize corporate environmental management and environmental audits. This article summarizes a study primarily concerned with the execution of an ecoaudit in a medium-sized furniture enterprise according to the rules of EMAS. Material flow accounting was used to assess and analyze the "gate-to-gate" and "cradle-to-grave" environmental impacts related to the firm's products and activities. A resource management strategy was developed that permits the determination of methods for firm-specific material flow management, product management, and ecological product design to improve environmental performance as seen from the vantage point of resource efficiency.

Beschreibung: It is not the scarcity of resources that constitutes environmental problems, but their use, the physical throughput of our economies. Material flows are a proxy for the totality of the unspecific environmental risks from human activities. As a strategic goal, an increase of the life-cycle-wide resource productivity by a factor 10 is suggested, including the materials bought and sold and the not-valued materials: we have to take into account the product itself and its "ecological rucksack". Material flows are best measured at the input side of the economy, where their number as well as the number of entry gates is limited. Thus here regulation and economic incentives can work more efficiently and less bureaucratically than today. The material intensity of products and services can be expressed as MIPS, the material input per unit of service, and as TMR, the total material requirement on the macro level, an important element in physical input–output tables.

Beschreibung: The role of hydrogen in long run sustainable energy scenarios for the world and for the case of Germany is analysed, based on key criteria for sustainable energy systems. The possible range of hydrogen within long-term energy scenarios is broad and uncertain depending on assumptions on used primary energy, technology mix, rate of energy efficiency increase and costs degression ("learning effects"). In any case, sustainable energy strategies must give energy efficiency highest priority combined with an accelerated market introduction of renewables ("integrated strategy"). Under these conditions hydrogen will play a major role not before 2030 using natural gas as a bridge to renewable hydrogen. Against the background of an ambitious CO2-reduction goal which is under discussion in Germany the potentials for efficiency increase, the necessary structural change of the power plant system (corresponding to the decision to phase out nuclear energy, the transformation of the transportation sector and the market implementation order of renewable energies ("following efficiency guidelines first for electricity generation purposes, than for heat generation and than for the transportation sector")) are analysed based on latest sustainable energy scenarios.

Beschreibung: Approaches to address unsustainable ways of societal development constantly proliferate, but total consumption of resources and aggregate environmental impacts continue rising. This could partially be explained by weak attempts to develop comprehensive sustainability strategies that address the entire life cycle of products and especially resource extraction and use phases. This paper seeks to explore to what extent these life cycle stages and associated impacts are taken into account when various actors employ life cycle thinking and how these concerns can be better attended to in policy-making, business strategies and lifestyle choices. To accomplish this, we evaluate the efforts of the main stakeholders in reaching sustainable consumption and sustainable resource management, and impediments to further progress, and study whether and how deficits in these phases coincide and can potentially contribute to more holistic practical realization of life cycle thinking. We demonstrate that new approaches are needed to be able to tackle the international dimension of production and consumption.

Beschreibung: For the option of “carbon capture and storage”, an integrated assessment in the form of a life cycle analysis and a cost assessment combined with a systematic comparison with renewable energies regarding future conditions in the power plant market for the situation in Germany is done. The calculations along the whole process chain show that CCS technologies emit per kWh more than generally assumed in clean-coal concepts (total CO2 reduction by 72-90% and total greenhouse gas reduction by 65-79%) and considerable more if compared with renewable electricity. Nevertheless, CCS could lead to a significant absolute reduction of GHG-emissions within the electricity supply system. Furthermore, depending on the growth rates and the market development, renewables could develop faster and could be in the long term cheaper than CCS based plants. Especially, in Germany, CCS as a climate protection option is phasing a specific problem as a huge amount of fossil power plant has to be substituted in the next 15 years where CCS technologies might be not yet available. For a considerable contribution of CCS to climate protection, the energy structure in Germany requires the integration of capture ready plants into the current renewal programs. If CCS retrofit technologies could be applied at least from 2020, this would strongly decrease the expected CO2 emissions and would give a chance to reach the climate protection goal of minus 80% including the renewed fossil-fired power plants.