ALBERT

Description: Background: In 2012, a pilot health policy of contractual service relations between general practitioners and patients was implemented in China. Due to the decline in body and cognitive function, as well as the lack of family care and narrow social support networks, the demand of health services among the elderly is much higher than that among the general population. This study aims to probe into the empty nesters’ willingness-to-pay for general practitioners using a contractual service policy, investigating empty nesters’ payment levels for the service, and analyze the main factors affecting the willingness of empty-nesters’ general practitioners using contractual service supply cost. Methods: This cross-sectional study adopted a multistage stratified sampling method to survey 865, city empty nesters (six communities in three districts of one city) aged 60–85 years. A condition value method was used to infer the distribution of the willingness-to-pay; Cox’s proportional hazards regression model was used to analyze the influencing factors of willingness-to-pay. Results: More than seventy percent (76.6%) of the empty nesters in this city were willing to pay general practitioners using contract service in Chongqing. The level of willingness-to-pay for the surveyed empty nesters was 34.1 yuan per year. The median value was 22.1 yuan per year, which was below the Chongqing urban and rural cooperative medical insurance individual funding level (60 yuan per year) in 2013. Cox’s proportional hazards regression model analysis showed that the higher the education level was, the worse the self-reported health status would be, accompanied by higher family per capita income, higher satisfaction of community health service, and higher willingness-to-pay empty nesters using a contract service. Women had a higher willingness-to-pay than men. Conclusions: The willingness-to-pay for general practitioners by contractual service is high among city empty nesters in Chongqing, thus, individual financing is feasible. However, people are willing to pay less than half of the current personal financing of cooperative medical insurance of urban and rural residents. Education level, family per capita income, and self-reported health status are the main factors affecting the cost sharing intention for general practitioners using contract service supply. According to the existing situation of different empty nesters, it is important to perfect the design of general practitioners using a contractual service policy system, according to differentiated personal financing levels.

Description: In order to achieve process intensification for adsorption chillers and heat pumps, a new composite material was developed based on sintered aluminum fibers from a melt-extraction process and a dense layer of silico-aluminophosphate (SAPO-34) on the fiber surfaces. The SAPO-34 layer was obtained through a partial support transformation (PST) process. Preparation of a composite sample is described and its characteristic pore size distribution and heat conductivity are presented. Water adsorption data obtained under conditions of a large pressure jump are given. In the next step, preparation of the composite was scaled up to larger samples which were fixed on a small adsorption heat exchanger. Adsorption measurements on this heat exchanger element that confirm the achieved process intensification are presented. The specific cooling power for the adsorption step per volume of composite is found to exceed 500 kW/m3 under specified conditions.

Description: The relationship between soil fauna and different fertilizer management practices is of growing concern. The aim of this research was to investigate the response of soil fauna to fertilization regimes, to explore the relationships among the community of soil animals, soil moisture and crop yields. The application of organic fertilizers (i.e., sheep manure or crop residues) increased crop yields and promoted the number of individuals and species of soil fauna owing to the exogenous organic matter that fertilizers provided for the survival and development of soil fauna. Furthermore, the treatments that applied sheep manure (i.e., sheep manure only or nitrogen, phosphorus, potassium and sheep manure plus) were significantly beneficial for increasing crop yields and diversity of soil fauna compared to treatments with crop residues returned (i.e., crop residues returned only or nitrogen, phosphorus, potassium and crop residues returned to the field) (p 〈 0.05) due to the response of soil fauna to diverse exogenous nutrients and the effect of soil fertility. Therefore, the finding that soil fauna abundance is significantly positively correlated with soil moisture and crop yield may mean the effects of fertilizer applications on soil animals were partly masked by the soil moisture and crop yield.

Description: This paper provides an overview of the main manufacturing technologies of displays, focusing on those with low and ultra-low levels of power consumption, which make them suitable for current societal needs. Considering the typified value obtained from the manufacturer’s specifications, four technologies—Liquid Crystal Displays, electronic paper, Organic Light-Emitting Display and Electroluminescent Displays—were selected in a first iteration. For each of them, several features, including size and brightness, were assessed in order to ascertain possible proportional relationships with the rate of consumption. To normalize the comparison between different display types, relative units such as the surface power density and the display frontal intensity efficiency were proposed. Organic light-emitting display had the best results in terms of power density for small display sizes. For larger sizes, it performs less satisfactorily than Liquid Crystal Displays in terms of energy efficiency.

Description: Model selection is an integral, yet contentious, component of epidemiologic research. Unfortunately, there remains no consensus on how to identify a single, best model among multiple candidate models. Researchers may be prone to selecting the model that best supports their a priori, preferred result; a phenomenon referred to as “wish bias”. Directed acyclic graphs (DAGs), based on background causal and substantive knowledge, are a useful tool for specifying a subset of adjustment variables to obtain a causal effect estimate. In many cases, however, a DAG will support multiple, sufficient or minimally-sufficient adjustment sets. Even though all of these may theoretically produce unbiased effect estimates they may, in practice, yield somewhat distinct values, and the need to select between these models once again makes the research enterprise vulnerable to wish bias. In this work, we suggest combining adjustment sets with model averaging techniques to obtain causal estimates based on multiple, theoretically-unbiased models. We use three techniques for averaging the results among multiple candidate models: information criteria weighting, inverse variance weighting, and bootstrapping. We illustrate these approaches with an example from the Pregnancy, Infection, and Nutrition (PIN) study. We show that each averaging technique returns similar, model averaged causal estimates. An a priori strategy of model averaging provides a means of integrating uncertainty in selection among candidate, causal models, while also avoiding the temptation to report the most attractive estimate from a suite of equally valid alternatives.

Description: The widespread, intentional and increasingly frequent chemical emplacement in the troposphere has gone unidentified and unremarked in the scientific literature for years. The author presents evidence that toxic coal combustion fly ash is the most likely aerosolized particulate sprayed by tanker-jets for geoengineering, weather-modification and climate-modification purposes and describes some of the multifold consequences on public health. Two methods are employed: (1) Comparison of 8 elements analyzed in rainwater, leached from aerosolized particulates, with corresponding elements leached into water from coal fly ash in published laboratory experiments, and (2) Comparison of 14 elements analyzed in dust collected outdoors on a high-efficiency particulate air (HEPA) filter with corresponding elements analyzed in un-leached coal fly ash material. The results show: (1) the assemblage of elements in rainwater and in the corresponding experimental leachate are essentially identical. At a 99% confidence interval, they have identical means (T-test) and identical variances (F-test); and (2) the assemblage of elements in the HEPA dust and in the corresponding average un-leached coal fly ash are likewise essentially identical. The consequences on public health are profound, including exposure to a variety of toxic heavy metals, radioactive elements, and neurologically-implicated chemically mobile aluminum released by body moisture in situ after inhalation or through transdermal induction.

Description: The impacts of climate change on human health have been documented globally and in the United States. Numerous studies project greater morbidity and mortality as a result of extreme weather events and other climate-sensitive hazards. Public health impacts on the U.S. Gulf Coast may be severe as the region is expected to experience increases in extreme temperatures, sea level rise, and possibly fewer but more intense hurricanes. Through myriad pathways, climate change is likely to make the Gulf Coast less hospitable and more dangerous for its residents, and may prompt substantial migration from and into the region. Public health impacts may be further exacerbated by the concentration of people and infrastructure, as well as the region’s coastal geography. Vulnerable populations, including the very young, elderly, and socioeconomically disadvantaged may face particularly high threats to their health and well-being. This paper provides an overview of potential public health impacts of climate variability and change on the Gulf Coast, with a focus on the region’s unique vulnerabilities, and outlines recommendations for improving the region’s ability to minimize the impacts of climate-sensitive hazards. Public health adaptation aimed at improving individual, public health system, and infrastructure resilience is urgently needed to meet the challenges climate change may pose to the Gulf Coast in the coming decades.

Description: This study forecasts the liquidity gap in China’s pension scheme for urban workers in the context of an ageing population and the possible effects of recent governmental policies by constructing a basic pension model, including “old people”, “middle people” and “new people” and a simulation method. We find, firstly, that China’s liquidity gap of pension will reach its peak of approximately 13.11 trillion yuan in 2038. Subsequently, this gap will gradually decrease with growth in the mortality rate. Secondly, reasonable intervals for the replacement and contribution rates should be set at [0.417, 0.604] and [0.189, 0.262], respectively, to sustain China’s pension system. Thirdly, compared to increasing fiscal subsidies, an income doubling plan, raising the contribution rate, lowering the replacement rate and delaying the retirement age can significantly reduce the liquidity gap, although the policy costs are relatively high. A policy permitting families to have two children will increase the rate of reduction of the liquidity gap, but it cannot effectively narrow the gap at the peak moment.

Description: Understanding the relationship between land use and surface water quality is necessary for effective water management. We estimated the impacts of catchment-wide land use on water quality during the dry and rainy seasons in the Dongjiang River basin, using remote sensing, geographic information systems and multivariate statistical techniques. The results showed that the 83 sites can be divided into three groups representing different land use types: forest, agriculture and urban. Water quality parameters exhibited significant variations between the urban-dominated and forest-dominated sites. The proportion of forested land was positively associated with dissolved oxygen concentration but negatively associated with water temperature, electrical conductivity, permanganate index, total phosphorus, total nitrogen, ammonia nitrogen, nitrate nitrogen and chlorophyll-a. The proportion of urban land was strongly positively associated with total nitrogen and ammonia nitrogen concentrations. Forested and urban land use had stronger impacts on water quality in the dry season than in the rainy season. However, agricultural land use did not have a significant impact on water quality. Our study indicates that urban land use was the key factor affecting water quality change, and limiting point-source waste discharge in urban areas during the dry season would be critical for improving water quality in the study area.

Description: The morphological properties of kaolin flocs were investigated in a Couette-flow experiment at the steady state under seven shear flow conditions (shear rates of 5.36, 9.17, 14, 24, 31, 41 and 53 s−1). These properties include a one-dimensional (1-D) fractal dimension (D1), a two-dimensional (2-D) fractal dimension (D2), a perimeter-based fractal dimension (Dpf) and an aspect ratio (AR). They were calculated based on the projected area (A), equivalent size, perimeter (P) and length (L) of the major axis of the floc determined through sample observation and an image analysis system. The parameter D2, which characterizes the relationship between the projected area and the length of the major axis using a power function, , increased from 1.73 ± 0.03, 1.72 ± 0.03, and 1.75 ± 0.04 in the low shear rate group (G = 5.36, 9.17, and 14 s−1) to 1.92 ± 0.03, 1.82 ± 0.02, 1.85 ± 0.02, and 1.81 ± 0.02 in the high shear rate group (24, 31, 41 and 53 s−1), respectively. The parameter D1 characterizes the relationship between the perimeter and length of the major axis by the function  and decreased from 1.52 ± 0.02, 1.48 ± 0.02, 1.55 ± 0.02, and 1.63 ± 0.02 in the low shear group (5.36, 9.17, 14 and 24 s−1) to 1.45 ± 0.02, 1.39 ± 0.02, and 1.39 ± 0.02 in the high shear group (31, 41 and 53 s−1), respectively. The results indicate that with increasing shear rates, the flocs become less elongated and that their boundary lines become tighter and more regular, caused by more breakages and possible restructurings of the flocs. The parameter Dpf, which is related to the perimeter and the projected area through the function , decreased as the shear rate increased almost linearly. The parameter AR, which is the ratio of the length of the major axis and equivalent diameter, decreased from 1.56, 1.59, 1.53 and 1.51 in the low shear rate group to 1.43, 1.47 and 1.48 in the high shear rate group. These changes in Dpf and AR show that the flocs become less convoluted and more symmetrical and that their boundaries become smoother and more regular in the high shear rate group than in the low shear rate group due to breakage and possible restructuring processes. To assess the effects of electrolyte and sediment concentration, 0.1 mol/L calcium chloride (CaCl2) and initial sediment concentration from 7.87 × 10−5 to 1.57 × 10−5 were used in this preliminary study. The addition of electrolyte and increasing sediment concentration could produce more symmetrical flocs with less convoluted and simpler boundaries. In addition, some new information on the temporal variation of the median size of the flocs during the flocculation process is presented.

Description: The Saudi Arabia (SA) climate varies greatly, depending on the geography and the season. According to K ppen and Geiger, the climates of SA is “desert climate”. The analysis of the seasonal rainfall detects that spring and winter seasons have the highestrainfall incidence, respectively. Through the summer,small quantities of precipitation are observed, while autumn received more precipitation more than summer season considering the total annual rainfall. In all seasons, the SW area receives rainfall, with a maximum in spring, whereas in the summer season, the NE and NW areas receive very little quantities of precipitation. The Rub Al-Khali (the SE region) is almost totally dry. The maximum amount of annual rainfall does not always happen at the highest elevation. Therefore, the elevation is not the only factor in rainfall distribution.A great inter-annual change in the rainfall over the SA for the period (1978–2009) is observed. In addition, in the same period, a linear decreasing trend is found in the observed rainfall, whilst in the recent past (1994–2009) a statistically significant negative trend is observed. In the Southern part of the Arabian Peninsula (AP) and along the coast of the Red Sea, it is interesting to note that rainfall increased, whilst it decreased over most areas of SA during the 2000–2009 decade, compared to 1980–1989.Statistical and numerical models are used to predict rainfall over Saudi Arabia (SA). The statistical models based on stochastic models of ARIMA and numerical models based on Providing Regional Climates for Impact Studies of Hadley Centre (PRECIS). Climate and its qualitative character and quantified range of possible future changes are investigated. The annual total rainfall decreases in most regions of the SA and only increases in the south. The summertime precipitation will be the highest between other seasons over the southern, the southwestern provinces and Asir mountains, while the wintertime rainfall will remain the lowest.The climate in the SA is instructed by the El Niño Southern Oscillation (ENSO) and other circulations such as centers of high and low pressure, the North Atlantic Oscillation (NAO) and SOI. Strength and oscillation of subtropical jet stream play a big role in pulling hot, dry air masses of SA.

Description: Accurate state of charge (SoC) estimation of batteries plays an important role in promoting the commercialization of electric vehicles. The main work to be done in accurately determining battery SoC can be summarized in three parts. (1) In view of the model-based SoC estimation flow diagram, the n-order resistance-capacitance (RC) battery model is proposed and expected to accurately simulate the battery’s major time-variable, nonlinear characteristics. Then, the mathematical equations for model parameter identification and SoC estimation of this model are constructed. (2) The Akaike information criterion is used to determine an optimal tradeoff between battery model complexity and prediction precision for the n-order RC battery model. Results from a comparative analysis show that the first-order RC battery model is thought to be the best based on the Akaike information criterion (AIC) values. (3) The real-time joint estimator for the model parameter and SoC is constructed, and the application based on two battery types indicates that the proposed SoC estimator is a closed-loop identification system where the model parameter identification and SoC estimation are corrected mutually, adaptively and simultaneously according to the observer values. The maximum SoC estimation error is less than 1% for both battery types, even against the inaccurate initial SoC.

Description: This is the second part of a study conducted to model the aerothermodynamic impact of suction parameters and gas properties on a multi-stage centrifugal compressor’s performance. A new iterative method has been developed in the first part to derive the equivalent performance at various operating conditions. This approach has been validated to predict the compressor map at different suction pressures and temperatures using the design characteristics as reference values. A further case is included in this paper in order to emphasize the validity of the developed approach to obtain the performance characteristics at various gas compositions. The provided example shows that the performance parameters at different gas mixtures can be predicted to within ±1.34%. Furthermore, the conducted optimization in this paper reveals that the proposed method can be applied for the compressor design evaluation corresponding to the expected variation in suction conditions. Moreover, the examined case study demonstrates the effect of gas properties’ variation on the operating point and aerodynamic stability of the entire compression system. In order to achieve that, a simple approach has been established to assess the contribution of gas properties’ variation to the inefficient and unstable compressor performance based on the available operational data.

Description: The in-wheel electric vehicle is expected to be a popular next-generation vehicle because an in-wheel system can simplify the powertrain and improve driving performance. In addition, it also has an advantage in that it maximizes driving efficiency through independent torque control considering the motor efficiency. However, there is an instability problem if only the driving torque is controlled in consideration of only the motor efficiency. In this paper, integrated torque distribution strategies are proposed to overcome these problems. The control algorithm consists of various strategies for optimizing driving efficiency, satisfying driver demands, and considering tire slip and vehicle cornering. Fuzzy logic is used to determine the appropriate timing of intervention for each distribution strategy. A performance simulator for in-wheel electric vehicles was developed by using MATLAB/Simulink and CarSim to validate the control strategies. From simulation results under complex driving conditions, the proposed algorithm was verified to improve both the driving stability and fuel economy of the in-wheel vehicle.

Description: The knowledge of unsteady forces is necessary when designing vertical axis wind turbines (VAWTs). Measurement data for turbines operating at an open site are still very limited. The data obtained from wind tunnels or towing tanks can be used, but have limited applicability when designing large-scale VAWTs. This study presents experimental data on the normal forces of a 12-kW straight-bladed VAWT operated at an open site north of Uppsala, Sweden. The normal forces are measured with four single-axis load cells. The data are obtained for a wide range of tip speed ratios: from 1.7 to 4.6. The behavior of the normal forces is analyzed. The presented data can be used in validations of aerodynamic models and the mechanical design for VAWTs.

Description: This paper introduces a new iterative method to predict the equivalent centrifugal compressor performance at various operating conditions. The presented theoretical analysis and empirical correlations provide a novel approach to derive the entire compressor map corresponding to various suction conditions without a prior knowledge of the detailed geometry. The efficiency model was derived to reflect the impact of physical gas properties, Mach number, and flow and work coefficients. One of the main features of the developed technique is the fact that it considers the variation in the gas properties and stage efficiency which makes it appropriate with hydrocarbons. This method has been tested to predict the performance of two multistage centrifugal compressors and the estimated characteristics are compared with the measured data. The carried comparison revealed a good matching with the actual values, including the stable operation region limits. Furthermore, an optimization study was conducted to investigate the influences of suction conditions on the stage efficiency and surge margin. Moreover, a new sort of presentation has been generated to obtain the equivalent performance characteristics for a constant discharge pressure operation at variable suction pressure and temperature working conditions. A further validation is included in part two of this study in order to evaluate the prediction capability of the derived model at various gas compositions.

Description: This paper presents an investigation of sewage sludge gasification in a fixed bed gasifier. Experiments were conducted on a laboratory scale fixed bed gasifier. In the experiments, two types of dried sewage sludge were tested and their properties were analysed. Parameters such as air ratio λ = 0.12 to 0.27, gasification agent temperature t = 50 to 250 °C and gasification agent composition ( = 0.21 and  > 0.21) were found to influence on temperature distribution, syngas Lower Heating Value (LHV) and syngas composition. The results indicate that the syngas LHV was found to decrease with increased air ratio for all analyzed cases: cold and preheated air and cold enriched air. The increase in the percentage of the main combustible components was accompanied by a decrease in the concentration of carbon dioxide. Increasing oxygen concentration increased the temperature, which tended to favor the formation of smaller molecules in the gas mixture. Thus, the enriched air medium produced a gas with a higher LHV. In contrast to conventional gasification, gasification process with gasification agent preheating causes that the flux of heat necessary to support endothermic gasification reactions is producing more effective. Air preheating causes increases hydrogen and carbon monoxide production.

Description: Background and Purpose: The aim of the present study was to assess a relationship between readiness to quit and post-stroke smoking behavior. Methods: Eighty-six active smokers with first-ever ischemic stroke were recruited in a tertiary-care stroke unit. The question “Are you ready to quit smoking within the next month?” with yes/no responses and the 10-cm readiness visual analog scale (VAS) was administered during the anti-smoking intervention. Smoking status was verified at the 3- and 12-month follow-up. Results: The readiness VAS score at hospitalization was significantly lower in patients classified as smokers as compared to patients classified as non-smokers. The readiness score 〈5 cm was a significant predictor of smoking at the 3-month (OR, 7.3) and 12-month follow-up (OR, 4.9). Conclusions: The present results suggest that the readiness VAS can be used as a simple and inexpensive instrument for early identification of patients who continue to smoke after stroke.

Description: A model for simulating vertical water level fluctuations with coupled liquid and gas phases is presented. The Preissmann implicit scheme is used to linearize the governing equations for one-dimensional transient flow for both liquid and gas phases, and the linear system is solved using the chasing method. Some classical cases for single liquid and gas phase transients in pipelines and networks are studied to verify that the proposed methods are accurate and reliable. The implicit scheme is extended using a dynamic mesh to simulate the water level fluctuations in a U-tube and an open surge tank without consideration of the gas phase. Methods of coupling liquid and gas phases are presented and used for studying the transient process and interaction between the phases, for gas phase limited in a chamber and gas phase transported in a pipeline. In particular, two other simplified models, one neglecting the effect of the gas phase on the liquid phase and the other one coupling the liquid and gas phases asynchronously, are proposed. The numerical results indicate that the asynchronous model performs better, and are finally applied to a hydropower station with surge tanks and air shafts to simulate the water level fluctuations and air speed.

Description: Patients with a polyherbal prescription are more likely to receive duplicate medications and thus suffer from adverse drug reactions. We conducted a population-based retrospective study to examine the items of Chinese herbal medicine (CHM) per prescription in the ambulatory care of traditional Chinese medicine (TCM) in Taiwan. We retrieved complete TCM ambulatory visit datasets for 2010 from the National Health Insurance database in Taiwan. A total of 59,790 patients who received 313,482 CHM prescriptions were analyzed. Drug prescriptions containing more than five drugs were classified as polyherbal prescriptions; 41.6% of patients were given a polyherbal prescription. There were on average 5.2 ± 2.5 CHMs: 2.3 ± 1.1 compound herbal formula items, and 3.0 ± 2.5 single Chinese herb items in a single prescription. Approximately 4.6% of patients were prescribed 10 CHMs or more. Men had a lower odds ratio (OR) among polyherbal prescriptions (OR = 0.96, 95% confidence interval [CI] 0.92–0.99), and middle-aged patients (35–49 years) had the highest frequency of polyherbal prescription (OR = 1.19, 95% CI = 1.13–1.26). Patients with neoplasm, skin and subcutaneous tissue disease, or genitourinary system disease were more likely to have a polyherbal prescription; OR = 2.20 (1.81–2.67), 1.65 (1.50–1.80), and 1.52 (1.40–1.64), respectively. Polyherbal prescription is widespread in TCM in Taiwan. Potential herb interactions and iatrogenic risks associated with polyherbal prescriptions should be monitored.

Description: Atmospheric concentrations of carbon dioxide (CO2), a major cause of global warming, have been rising due to industrial development. Carbon capture and storage (CCS), which is regarded as the most effective way to reduce such atmospheric CO2 concentrations, has several environmental and technical disadvantages. Carbon capture and utilization (CCU), which has been introduced to cover such disadvantages, makes it possible to capture CO2, recycling byproducts as resources. However, CCU also requires large amounts of energy in order to induce reactions. Among existing CCU technologies, the process for converting CO2 into CaCO3 requires high temperature and high pressure as reaction conditions. This study proposes a method to fixate CaCO3 stably by using relatively less energy than existing methods. After forming NaOH absorbent solution through electrolysis of NaCl in seawater, CaCO3 was precipitated at room temperature and pressure. Following the experiment, the resulting product CaCO3 was analyzed with Fourier transform infrared spectroscopy (FT-IR); field emission scanning electron microscopy (FE-SEM) image and X-ray diffraction (XRD) patterns were also analyzed. The results showed that the CaCO3 crystal product was high-purity calcite. The study shows a successful method for fixating CO2 by reducing carbon dioxide released into the atmosphere while forming high-purity CaCO3.

Description: The effect of fuel composition on gasification process performance was investigated by performing mass and energy balances on a pre-pilot scale bubbling fluidized bed reactor fed with mixtures of plastic waste, wood, and coal. The fuels containing plastic waste produced less H2, CO, and CO2 and more light hydrocarbons than the fuels including biomass. The lower heating value (LHV) progressively increased from 5.1 to 7.9 MJ/Nm3 when the plastic waste fraction was moved from 0% to 100%. Higher carbonaceous fines production was associated with the fuel containing a large fraction of coal (60%), producing 87.5 g/kgFuel compared to only 1.0 g/kgFuel obtained during the gasification test with just plastic waste. Conversely, plastic waste gasification produced the highest tar yield, 161.9 g/kgFuel, while woody biomass generated only 13.4 g/kgFuel. Wood gasification showed a carbon conversion efficiency (CCE) of 0.93, while the tests with two fuels containing coal showed lowest CCE values (0.78 and 0.70, respectively). Plastic waste and wood gasification presented similar cold gas efficiency (CGE) values (0.75 and 0.76, respectively), while that obtained during the co-gasification tests varied from 0.53 to 0.73.

Description: Free acidity of aqueous solutions was initially defined in 1909 by Søren Peter Lauritz Sørensen as pH = −lgcH+ (c/mol·dm−3 or m/mol·kg−1 of the free hydrogen ions in solution, H+) soon (1910) was changed to pH = paH+ = −lgaH+, integrating the new concepts of activity, ai and activity coefficient γi, for the ionic species i under concern, H+ in this case; it is ai = −lg(miγi). Since individual ions do not exist alone in solution, primary pH values cannot be assigned solely by experimental measurements, requiring extra thermodynamic model assumptions for the activity coefficient, γH+, which has put pH in a unique situation of not being fully traceable to the International System of Units (SI). Also the concept of activity is often not felt to be as perceptible as that of concentration which may present difficulties, namely with the interpretation of data. pH measurements on unknown samples rely on calibration of the measuring setup with adequate reference pH buffers. In this work, the assignment of pH values to buffers closely matching the samples, e.g., seawater, is revisited. An approach is presented to assess the quantity pmH+ = −lgmH+ profiting from the fact that, contrary to single ion activity coefficients, mean activity coefficients,   can be assessed based on experimentally assessed quantities alone, γExp ±, thus ensuring traceability to the mole, the SI base unit for amount of substance. Compatibility between γExp ± and mean activity coefficient calculated by means of Pitzer model equations, γPtz ±, validates the model for its intended use.

Description: Drainage networks are essential compartments in an urban infrastructure system for the efficient collection and prompt drainage of flood water. In addition to the advances in numerical techniques on urban flood simulation, the topological characteristics of urban drainage networks and their impacts on flooding have not been investigated thoroughly despite their importance. This study evaluated the urban drainage networks in Seoul, South Korea, in terms of the network configuration and its implication for peak flows and flood mitigation. Gibbs’ model was used to analyze the network configuration of 31 urban catchments with various slope ranges. The results showed that urban drainage networks can be less efficient than river in nature in terms of the drainage time, which is counter-intuitive. On the other hand, the analysis showed that efficient networks have risks of flood concentration and, hence, increase potential flood risks. This study showed that efficient networks tend to have higher peak flows at the outlet and vice versa. Therefore, an alternative drainage network layout, which is less efficient and more sinuous, was introduced and it resulted in reduced peak flows and flooding. This result shows managing a proper drainage network layout can contribute to flood mitigation in urban catchments.

Description: Aquifers within the Columbia River Basalt Group (CRBG) provide a critical water supply throughout much of the Pacific Northwest of the United States. Increased pumping has resulted in water level declines in this region. Recharge into this aquifer system is generally not well understood. Recent suggestions of probable decades-long droughts in the 21st century add to this problem. We show that geophysical methods can provide useful parameters for improved modeling of aquifers in a primary CRBG aquifer located on the eastern edge of the Columbia Plateau. Groundwater models depend in part on the area, thickness, porosity, storativity, and nature of confinement of this aquifer, most of which are poorly constrained by existing well information and previous stress tests. We have made use of surface gravity measurements, borehole gravity measurements, barometric efficiency estimates, earth tidal response, and earthquake seismology observations to constrain these parameters. We show that the aquifer, despite its persistent drawdown, receives a great deal of recharge annually. Much of the recharge to the aquifer is due to leakage from overlying flows, ultimately tied to precipitation, an important result for future aquifer management in times of sustained drought.

Description: Low flows of the Ilmenau River (1434 km2) in northwest Germany have decreased by about 25% over the last 50 years. In the same period, moderate climate changes have taken place and annual groundwater abstractions for sprinkler irrigation have increased by up to 50 hm3 (million m3), with a strong variation due to the respective prevailing weather conditions. Time-series analyses with multiple regression analysis allow detecting and quantifying different influences on low flows. It is also shown that farmers allocate irrigation water volumes carefully according to seasonal precipitation and temperatures. Decline of groundwater levels in summer and the low flow situation are aggravated by the cumulative effect of higher irrigation in drier years. Groundwater recharge and recovery of the water table have been observed subsequently during the winter season.

Description: Cities’ energy usage accounts for two thirds of global primary energy consumption. Energy efficiency in urban areas is, therefore, one of the most important topics to consider when dealing with urban sustainability. This paper evaluates the goals for increasing energy efficiency and use of renewable energy sources in the areas of transportation, buildings and consumers’ awareness, as stated in the Climate action plan, for the municipality of Eskilstuna, Sweden. The efforts of the municipality to successfully reach their energy efficiency goals, are described in this paper including future perspectives. The results show that although the municipality counts with the advantage of owning and working together with the local housing company and energy provider, in order to reach the established goals, additional strategies need to be considered. For an increased use of renewable energy sources, analysis of rooftops suitable for photovoltaic (PV) installation should be carried out as well as the integration of goals for self-consumption. In the transport field, the city needs to prepare for large-scale electric vehicle (EV) market penetration and to consider different bike or car sharing options. Finally, more specific awareness campaigns are needed to engage the citizens in reducing their energy consumption and living a more sustainable life.

Description: The current accelerated growth in demand for energy globally is confronted by water-resource limitations and hydrologic variability linked to climate change. The global spatial and temporal trends in water requirements for energy development and policy alternatives to address these constraints are poorly understood. This article analyzes national-level energy demand trends from U.S. Energy Information Administration data in relation to newly available assessments of water consumption and life-cycle impacts of thermoelectric generation and biofuel production, and freshwater availability and sectoral allocations from the U.N. Food and Agriculture Organization and the World Bank. Emerging, energy-related water scarcity flashpoints include the world’s largest, most diversified economies (Brazil, India, China, and USA among others), while physical water scarcity continues to pose limits to energy development in the Middle East and small-island states. Findings include the following: (a) technological obstacles to alleviate water scarcity driven by energy demand are surmountable; (b) resource conservation is inevitable, driven by financial limitations and efficiency gains; and (c) institutional arrangements play a pivotal role in the virtuous water-energy-climate cycle. We conclude by making reference to coupled energy-water policy alternatives including water-conserving energy portfolios, intersectoral water transfers, virtual water for energy, hydropower tradeoffs, and use of impaired waters for energy development.

Description: In the last decades the increasing energy requirements along with the need to face the consequences of climate change have driven the search for renewable energy sources, in order to replace as much as possible the use of fossil fuels. In this context biomass has generated great interest as it can be converted into energy via several routes, including fermentation and anaerobic digestion. The former is the most common option to produce ethanol, which has been recognized as one of the leading candidates to substitute a large fraction of the liquid fuels produced from oil. As the economic competitiveness of bioethanol fermentation processes has to be enhanced in order to promote its wider implementation, the most recent trends are directed towards the use of fermentation by-products within anaerobic digestion. The integration of both fermentation and anaerobic digestion, in a biorefinery concept, would allow the production of ethanol along with that of biogas, which can be used to produce heat and electricity, thus improving the overall energy balance. This work aims at reviewing the main studies on the combination of both bioethanol and biogas production processes, in order to highlight the strength and weakness of the integrated treatment for industrial application.

Description: Objective: To assess the burden of regional environmental factors influencing the incidence of Melanoma in the Italian population and overcome the problem of partial population coverage by local cancer registries and thematic archives. Methods: We analyzed the Italian national hospitalization records from 2001 to 2008 provided by the Ministry of Health, excluding hospital re-admissions of the same patients, in order to assess the occurrence of Melanoma over a 8-year period. Data were presented by age groups (absolute number of cases from 20 to ≥80 years old) and per Region (rates per 100,000 inhabitants) for each year. Results: The overall number of new hospitalizations due to malignant Melanoma increased by 16.8% from 2001 (n = 4846) to 2008 (n = 5823), with the rate per 100,000 inhabitants passing from 10.5 to almost 12.0 at a national level. The majority of new diagnoses of malignant Melanoma was observed in two age groups: 61–70 years old (from 979 in 2001 up to 2109 in 2008, corresponding to 15.1 and 18.1 new cases per 100,000 inhabitants, respectively) and 71–80 years old (from 954 in 2001 up to 1141 in 2008, corresponding to 19.5 and 21.8 new cases per 100,000 inhabitants, respectively). The number of hospitalizations due to Melanoma increased in all age groups with the only exception of the youngest patients aged 20–30 years old. The highest increases over the 8-year period were observed in people aged ≥81 years old (+34%), 61–70 years old (+20%) and surprisingly in the age group 31–40 years old (+17%). Southern Regions showed lower hospitalization rates compared to Northern Italy and Region Lazio. The highest increases between 2001 and 2008 were observed in Trentino/Alto Adige, Friuli Venezia Giulia, Valla d’Aosta and Veneto Region. Conclusions: Hospitalizations due to malignant Melanoma in Italy seem to be influenced by environmental or population-related factors showing a decreasing incidence rate from the Northern to Southern Regions.

Description: During the last few years, the issues of energy efficiency and energy saving have dominated the buildings research field. New constructions are based on efficient design and, because of this, the real challenge is to retrofit existing buildings. Italian standards impose thermal transmittance limits for opaque and transparent surfaces, according to the climatic area. In order to understand buildings’ energy behavior, an accurate analysis, carried out by employing advanced calculation codes and instrumental diagnosis—provided by the use of heat flow meter, surface temperature probes and thermal imaging camera—is needed. In this paper, a structure built in the 50 s has been analyzed, by means of a measurement campaign, to investigate the building’s characteristics and its vulnerability. Finally, some retrofit hypotheses have been evaluated by means of a well-known dynamic code. All investments have to be analyzed under a financial point of view, considering materials and installation costs. For this reason, the payback time has been calculated in order to understand how quickly the energy upgrading can be repaid.

Description: The main aim of this research was to improve risk mapping of heavy metals by taking account of erosion effects. A new spatiotemporal index, namely the G2met index, is introduced, with integration of pre-existing methodologies (Hakanson, EPM, and G2). The G2met index is depicted as a series of risk maps for each heavy metal on a month-time step. The southern part of Cyprus Island was selected as a study area. Concentration of major heavy metals was extracted with soil sampling in a grid of 5350 sites. Rainfall, vegetation, soil, land use, topographic, and hydrologic data were collected from existing European or global databases (WorldClim, BioBar, REDES, ESDAC, CORINE, ASTER GDEM, and USGS). A large number of regional-scale risk maps (with 500-m cell size) were created: one for each heavy metal and totally per month and annually; in addition, choropleth maps in terms of statistics per river basin were produced for every metal. Generally, the G2met maps resulted in different spatial patterns in comparison to those depicted by the Hakanson index alone.

Description: Background: Second hand smoke (ETS)-associated particulate matter (PM) contributes considerably to indoor air contamination and constitutes a health risk for passive smokers. Easy to measure, PM is a useful parameter to estimate the dosage of ETS that passive smokers are exposed to. Apart from its suitability as a surrogate parameter for ETS-exposure, PM itself affects human morbidity and mortality in a dose-dependent manner. We think that ETS-associated PM should be considered an independent hazard factor, separately from the many other known harmful compounds of ETS. We believe that brand-specific and tobacco-product-specific differences in the release of PM matter and that these differences are of public interest. Methods: To generate ETS of cigarettes and cigarillos as standardized and reproducible as possible, an automatic second hand smoke emitter (AETSE) was developed and placed in a glass chamber. L&M cigarettes (“without additives”, “red label”, “blue label”), L&M filtered cigarillos (“red”) and 3R4F standard research cigarettes (as reference) were smoked automatically according to a self-developed, standardized protocol until the tobacco product was smoked down to 8 mm distance from the tipping paper of the filter. Results: Mean concentration (Cmean) and area under the curve (AUC) in a plot of PM2.5 against time were measured, and compared. CmeanPM2.5 were found to be 518 μg/m3 for 3R4F cigarettes, 576 μg/m3 for L&M “without additives” (“red”), 448 μg/m3 for L&M “blue label”, 547 μg/m3 for L&M “red label”, and 755 μg/m3 for L&M filtered cigarillos (“red”). AUCPM2.5-values were 208,214 μg/m3·s for 3R4F reference cigarettes, 204,629 μg/m3·s for L&M “without additives” (“red”), 152,718 μg/m3·s for L&M “blue label”, 238,098 μg/m3·s for L&M “red label” and 796,909 μg/m3·s for L&M filtered cigarillos (“red”). Conclusion: Considering the large and significant differences in particulate matter emissions between cigarettes and cigarillos, we think that a favorable taxation of cigarillos is not justifiable.

Description: Drought is a serious natural hazard with far-reaching impacts including soil damages, economic losses, and threatening the livelihood and health of local residents. The goal of the present work was to monitor the vegetation health across Lebanon in 2014 using remote sensing techniques. Landsat images datasets, with a spatial resolution of 30 m and from different platforms, were used to identify the VCI (Vegetation Condition Index) and TCI (Temperature Condition Index). The VCI was based on the Normalized Difference Vegetation Index (NDVI) datasets. The TCI used land surface temperature (LST) datasets. As a result, the VHI (Vegetation Health Index) was produced and classified into five categories: extreme, severe, moderate, mild, and no drought. The results show practically no extreme drought (~0.27 km2) in the vegetated area in Lebanon during 2014. Moderate to severe drought mainly occurred in the north of Lebanon (i.e., the Amioun region and the plain of Akkar). The Tyr region and the Bekaa valley experienced a low level of drought (mild drought). This approach allows decision makers to monitor, investigate and resolve drought conditions more effectively.

Description: We propose an optimal electric energy management of a cooperative multi-microgrid community with sequentially coordinated operations. The sequentially coordinated operations are suggested to distribute computational burden and yet to make the optimal 24 energy management of multi-microgrids possible. The sequential operations are mathematically modeled to find the optimal operation conditions and illustrated with physical interpretation of how to achieve optimal energy management in the cooperative multi-microgrid community. This global electric energy optimization of the cooperative community is realized by the ancillary internal trading between the microgrids in the cooperative community which reduces the extra cost from unnecessary external trading by adjusting the electric energy production amounts of combined heat and power (CHP) generators and amounts of both internal and external electric energy trading of the cooperative community. A simulation study is also conducted to validate the proposed mathematical energy management models.

Description: We wish to make the following changes to the published article [1], agreed upon by all authors. Claudia R. Binder has withdrawn her co-authorship. The corrected author list should therefore read: Camilo Lesmes-Fabian.[...]

Description: The cadmium (Cd) contaminated rice fields in Mae Sot District, Tak Province, Thailand has been one of the major environmental problems in Thailand for the last 10 years. We used disability adjusted life years (DALYs) to estimate the burden of disease attributable to Cd in terms of additional DALYs of Mae Sot residents. Cd exposure data included Cd and β2–microglobulin (β2-MG) in urine (as an internal exposure dose) and estimated cadmium daily intake (as an external exposure dose). Compared to the general Thai population, Mae Sot residents gained 10%–86% DALYs from nephrosis/nephritis, heart diseases, osteoporosis and cancer depending on their Cd exposure type and exposure level. The results for urinary Cd and dietary Cd intake varied according to the studies used for risk estimation. The ceiling effect was observed in results using dietary Cd intake because of the high Cd content in rice grown in the Mae Sot area. The results from β2-MG were more robust with additional DALYs ranging from 36%–86% for heart failure, cerebral infraction, and nephrosis/nephritis. Additional DALYs is a useful approach for assessing the magnitude of environmental Cd exposure. The Mae Sot population lost more healthy life compared to populations living in a non- or less Cd polluted area. This method should be applicable to various types of environmental contamination problems if exposure assessment information is available.

Description: Titanium dioxide nanoparticles (TiO2NPs) suspensions (concentration 1.0 g/L) in synthetic sweat solution were applied on Franz cells for 24 h using intact and needle-abraded human skin. Titanium content into skin and receiving phases was determined. Cytotoxicity (MTT, AlamarBlue® and propidium iodide, PI, uptake assays) was evaluated on HaCat keratinocytes after 24 h, 48 h, and seven days of exposure. After 24 h of exposure, no titanium was detectable in receiving solutions for both intact and damaged skin. Titanium was found in the epidermal layer after 24 h of exposure (0.47 ± 0.33 μg/cm2) while in the dermal layer, the concentration was below the limit of detection. Damaged skin, in its whole, has shown a similar concentration (0.53 ± 0.26 μg/cm2). Cytotoxicity studies on HaCaT cells demonstrated that TiO2NPs induced cytotoxic effects only at very high concentrations, reducing cell viability after seven days of exposure with EC50s of 8.8 × 10−4 M (MTT assay), 3.8 × 10−5 M (AlamarBlue® assay), and 7.6 × 10−4 M (PI uptake, index of a necrotic cell death). Our study demonstrated that TiO2NPs cannot permeate intact and damaged skin and can be found only in the stratum corneum and epidermis. Moreover, the low cytotoxic effect observed on human HaCaT keratinocytes suggests that these nano-compounds have a potential toxic effect at the skin level only after long-term exposure.

Description: The disposal of industrial paper mill sludge waste is a big issue and has a great importance all over the world. A study was conducted to determine the chemical properties of recycled paper mill sludge (RPMS) and assess its possibilities for land application. RPMS samples were collected from six different paper mills in Malaysia and analyzed for physical and chemical properties, heavy metals, polycyclic aromatic hydrocarbons, 13C-NMR spectra and for the presence of dioxins/furans. The RPMS was dewatered, sticky with a strong odour, an average moisture of 65.08%, pH 7.09, cation exchange capacity (CEC) 14.43 cmol (+) kg–1, N 1.45, P 0.18, K 0.12, Ca 0.82, Mg 0.73, Na 0.76 and Al, 1.38%. The polycyclic aromatic hydrocarbons (PAHs) and heavy metals levels were below the standard Class 2 limits. The dioxin and furan were in below the standard concentration of Class 1. The most prominent peak in the 13C-NMR spectra of RPMS was centered at 31 ppm, proving the presence of methylene (-CH2) groups in long aliphatic chains, with lipids and proteins. The signal at 89 ppm and highly shielded shoulder at 83 ppm were due to presence of cellulose carbon C-4, and the peak at 63 and 65 ppm was due to the cellulose carbon spectrum. The RPMS therefore contains significant amount of nutrients with safe levels of heavy metals and PAHs for environment and can be used as a fertilizer and soil amendment for land application.

Description: Doctor-shopping has caused an increase in medical expense, potential to receive duplicate medications, and suffer adverse drug reactions. We carried out a population-based retrospective study aimed at examining the user patterns of traditional Chinese medicine (TCM) ambulatory care in Taiwan. We retrieved complete TCM ambulatory visit datasets for the year 2007 from the National Health Insurance database in Taiwan. We defined the patients whose distribution of TCM physician numbers scored more than 97.5 percent (more than, or equal to, five TCM physicians) within one year as TCM doctor-shoppers. In total, 6,596,814 subjects (28.9%) paid TCM visits during that year. All 177,728 subjects (2.69%) who visited more than five (including) TCM physicians were classified as TCM shoppers. The most prevalent diagnostic grouping was upper respiratory infections (44.7%) and sprains and strains (44.0%). Men had a lower odds ratio (OR) among TCM shoppers than women (OR = 0.94, 95% confidence interval (CI) = 0.93–0.96). Younger people were less likely to be TCM shoppers than other people were. The ORs of TCM shoppers were higher among veterans and low-income patients (OR = 1.29 (1.23–1.35), and 1.33 (1.27–1.41)). In conclusion, health education on the potential of drug interactions and iatrogenic health risks incurred from doctor-shopping should be addressed to those high-risk patients.

Description: Day-to-day variability and stability of children’s physical activity levels across days of the week are not well understood. Our aims were to examine the day-to-day variability of moderate-to-vigorous physical activity (MVPA), to determine factors influencing the day-to-day variability of MVPA and to estimate stability of MVPA in children. The sample comprises 686 Portuguese children (10 years of age). MVPA was assessed with an accelerometer, and BMI was computed from measured height and weight. Daily changes in MVPA and their correlates (gender, BMI, and maturity) were modeled with a multilevel approach, and tracking was calculated using Foulkes & Davies γ. A total of 51.3% of boys and 26.2% of girls achieved 60 min/day of MVPA on average. Daily MVPA was lower during the weekend (23.6% of boys and 13.6% of girls comply with the recommended 60 min/day of MVPA) compared to weekdays (60.8% and 35.4%, boys and girls, respectively). Normal weight children were more active than obese children and no effect was found for biological maturation. Tracking is low in both boys (γ = 0.59 ± 0.01) and girls (γ = 0.56 ± 0.01). Children’s MVPA levels during a week are highly unstable. In summary, boys are more active than girls, maturation does not affect their MVPA, and obese children are less likely to meet 60 min/day of MVPA. These results highlight the importance of providing opportunities for increasing children’s daily MVPA on all days of week, especially on the weekend.

Description: Congestion pricing strategy has been recognized as an effective countermeasure in the practical field of urban traffic congestion mitigation. In this paper, a bi-level programming model considering carbon dioxide emission is proposed to mitigate traffic congestion and reduce carbon dioxide emissions. The objective function of the upper level model is to minimize the sum of travel costs and the carbon dioxide emissions costs. The lower level is a multi-modal transportation network equilibrium model. To solve the model, the method of successive averages (MSA) and the shuffled frog leaping algorithm (SFLA) are introduced. The proposed method and algorithm are tested through the numerical example. The results show that the proposed congestion pricing strategy can mitigate traffic congestion and reduce carbon emissions effectively.

Description: We investigated the synergetic effect between light-emitting diode (LED) lighting efficiency and building energy savings in heating and cooling using an alternative thermal operating system (ATOS) of indoor LED lighting integrated with the ventilation system of a building as an active cooling device. The heat generated from LED lighting and the indoor lighting illuminance were experimentally determined. The indoor heat gains in cooling and heating periods were determined using measurement data; the annual energy savings of an office building in heating and cooling were calculated through simulation. The LED lighting illuminance increased by approximately 40% and the lighting contribution for indoor heat gain was 7.8% in summer, while 69.8% in winter with the ATOS. Consequently, the annual total energy use of the office building could be reduced by 5.9%; the energy use in cooling and heating was reduced by 18.4% and 3.3%, respectively.

Description: The microbiological sanitary quality and safety of leafy greens and strawberries were assessed in the primary production in Belgium, Brazil, Egypt, Norway and Spain by enumeration of Escherichia coli and detection of Salmonella, Shiga toxin-producing E. coli (STEC) and Campylobacter. Water samples were more prone to containing pathogens (54 positives out of 950 analyses) than soil (16/1186) and produce on the field (18/977 for leafy greens and 5/402 for strawberries). The prevalence of pathogens also varied markedly according to the sampling region. Flooding of fields increased the risk considerably, with odds ratio (OR) 10.9 for Salmonella and 7.0 for STEC. A significant association between elevated numbers of generic E. coli and detection of pathogens (OR of 2.3 for STEC and 2.7 for Salmonella) was established. Generic E. coli was found to be a suitable index organism for Salmonella and STEC, but to a lesser extent for Campylobacter. Guidelines on frequency of sampling and threshold values for E. coli in irrigation water may differ from region to region.

Description: The objective of this research is to provide a standardized platform to monitor and predict indicators of people with traumatic brain injury using the International Classification of Functioning, Disability and Health, and analyze its potential benefits for people with disabilities, health centers and administrations. We developed a platform that allows automatic standardization and automatic graphical representations of indicators of the status of individuals and populations. We used data from 730 people with acquired brain injury performing periodic comprehensive evaluations in the years 2006–2013. Health professionals noted that the use of color-coded graphical representation is useful for quickly diagnose failures, limitations or restrictions in rehabilitation. The prognosis system achieves 41% of accuracy and sensitivity in the prediction of emotional functions, and 48% of accuracy and sensitivity in the prediction of executive functions. This monitoring and prognosis system has the potential to: (1) save costs and time, (2) provide more information to make decisions, (3) promote interoperability, (4) facilitate joint decision-making, and (5) improve policies of socioeconomic evaluation of the burden of disease. Professionals found the monitoring system useful because it generates a more comprehensive understanding of health oriented to the profile of the patients, instead of their diseases and injuries.

Description: Objectives: In 2005, China acceded to the World Health Organization Framework Convention on Tobacco Control (WHO FCTC), the foundation for the global fight against tobacco. Certain cities in China have established local regulations to control tobacco use ahead of national policy; however, without the enforcement of statutory law, some of these regulations are merely lip service. The aim of the study was to assess the effects of city policy on smoking prevalence and on second-hand smoke (SHS) exposure status among non-smokers in Changchun City. Methods: A cross-sectional survey covering a multiple-stage, representative sample of the urban population aged ≥15 years was conducted between 1 Dec 2013 and 31 Jan 2014. The WHO and the US Centers for Disease Control and Prevention developed the questionnaires used, which included demographic characteristics, smoking behaviors and SHS exposure status. Results: Overall cigarette smoking prevalence was 23.5%; daily cigarette smoking prevalence was 21.2%. Smoking prevalence and cigarettes consumed per day was higher among men (p 〈 0.05) and those aged 45–64 years (p 〈 0.05). Among current smokers, 8.1% planned to quit within 12 months; 53.4% had no intention of quitting. Overall SHS exposure prevalence was 41.9% (workplace) and 34.1% (at home) over the previous 30 days. The weighted workplace SHS exposure prevalence increased with age. Conclusions: The high proportion of smokers with no intention of quitting and the high level of SHS exposure may constitute one of the most significant barriers to successful smoking cessation in the city. A continued drive to promote full implementation of the WHO FCTC is still needed.

Description: Contemporary ecological models of health prominently feature the natural environment as fundamental to the ecosystem services that support human life, health, and well-being. The natural environment encompasses and permeates all other spheres of influence on health. Reviews of the natural environment and health literature have tended, at times intentionally, to focus on a limited subset of ecosystem services as well as health benefits stemming from the presence, and access and exposure to, green infrastructure. The sweeping influence of green infrastructure on the myriad ecosystem services essential to health has therefore often been underrepresented. This survey of the literature aims to provide a more comprehensive picture—in the form of a primer—of the many simultaneously acting health co-benefits of green infrastructure. It is hoped that a more accurately exhaustive list of benefits will not only instigate further research into the health co-benefits of green infrastructure but also promote consilience in the many fields, including public health, that must be involved in the landscape conservation necessary to protect and improve health and well-being.

Description: There is growing evidence of climate change affecting infectious disease risk in Western Europe. The call for effective adaptation to this challenge becomes increasingly stronger. This paper presents the results of a survey exploring Dutch expert perspectives on adaptation responses to climate change impacts on infectious disease risk in Western Europe. Additionally, the survey explores the expert sample’s prioritization of mitigation and adaptation, and expert views on the willingness and capacity of relevant actors to respond to climate change. An integrated view on the causation of infectious disease risk is employed, including multiple (climatic and non-climatic) factors. The results show that the experts consider some adaptation responses as relatively more cost-effective, like fostering interagency and community partnerships, or beneficial to health, such as outbreak investigation and response. Expert opinions converge and diverge for different adaptation responses. Regarding the prioritization of mitigation and adaptation responses expert perspectives converge towards a 50/50 budgetary allocation. The experts consider the national government/health authority as the most capable actor to respond to climate change-induced infectious disease risk. Divergence and consensus among expert opinions can influence adaptation policy processes. Further research is necessary to uncover prevailing expert perspectives and their roots, and compare these.

Description: Cigarette butts (tobacco product waste (TPW)) are the single most collected item in environmental trash cleanups worldwide. This brief descriptive study used an online survey tool (Survey Monkey) to assess knowledge, attitudes, and beliefs among individuals representing the Framework Convention Alliance (FCA) about this issue. The FCA has about 350 members, including mainly non-governmental tobacco control advocacy groups that support implementation of the World Health Organization’s (WHO) Framework Convention on Tobacco Control (FCTC). Although the response rate (28%) was low, respondents represented countries from all six WHO regions. The majority (62%) have heard the term TPW, and nearly all (99%) considered TPW as an environmental harm. Most (77%) indicated that the tobacco industry should be responsible for TPW mitigation, and 72% felt that smokers should also be held responsible. This baseline information may inform future international discussions by the FCTC Conference of the Parties (COP) regarding environmental policies that may be addressed within FCTC obligations. Additional research is planned regarding the entire lifecycle of tobacco’s impact on the environment.

Description: The aim of this study was to assess the correlation between blood lead levels and both serum uric acid and hyperuricemia in adult residents living within an area of China with lead pollution.  We conducted a cross-sectional analysis of 2120 subjects (1180 of whom were male) between the ages of 20 and 75 years who had undergone health examinations at the Centers for Disease Control and Prevention (CDC) in a lead-polluted area of China between January 2013 and August 2014. Blood lead was positively correlated with serum uric acid in both males (r = 0.095, p = 0.001) and females (r = 0.134, p 〈 0.001). Multivariate linear regression analysis demonstrated that for males, blood lead (p = 0.006), age (p = 0.001), current smoking (p = 0.012), education (p = 0.001), triglycerides (TG) (p 〈 0.001), and serum creatinine (p 〈 0.001) were independently associated with serum uric acid. For females, blood lead (p 〈 0.001), body mass index (BMI) (p = 0.009), and TG (p 〈 0.001) were independently associated with serum uric acid. After multiple adjustments, blood lead was significantly associated with a higher prevalence of hyperuricemia when female subjects were categorized into quartiles (for the highest quartile vs. the lowest quartile, odds ratio (OR) = 2.190; 95% confidence interval (CI): 1.106–4.338; p = 0.025); however, no such association was observed for male subjects. Continuous lead exposure has an independent impact on serum uric acid for both males and females, although this impact is more pronounced for females than for males. Lead exposure is significantly associated with hyperuricemia for females but not for males.

Description: The internet and associated Information and Communications Technologies (ICT) are diffusing at an astounding pace. As data centers (DCs) proliferate to accommodate this rising demand, their environmental impacts grow too. While the energy efficiency of DCs has been researched extensively, their water footprint (WF) has so far received little to no attention. This article conducts a preliminary WF accounting for cooling and energy consumption in DCs. The WF of DCs is estimated to be between 1047 and 151,061 m3/TJ. Outbound DC data traffic generates a WF of 1–205 liters per gigabyte (roughly equal to the WF of 1 kg of tomatos at the higher end). It is found that, typically, energy consumption constitues by far the greatest share of DC WF, but the level of uncertainty associated with the WF of different energy sources used by DCs makes a comprehensive assessment of DCs’ water use efficiency very challenging. Much better understanding of DC WF is urgently needed if a meaningful evaluation of this rapidly spreading service technology is to be gleaned and response measures are to be put into effect.

Description: This study investigated the capability of a biosurfactant produced by a novel strain of Bacillus salmalaya to enhance the biodegradation rates and bioavailability of organic contaminants. The biosurfactant produced by cultured strain 139SI showed high physicochemical properties and surface activity in the selected medium. The biosurfactant exhibited a high emulsification index and a positive result in the drop collapse test, with the results demonstrating the wetting activity of the biosurfactant and its potential to produce surface-active molecules. Strain 139SI can significantly reduce the surface tension (ST) from 70.5 to 27 mN/m, with a critical micelle concentration of 0.4%. Moreover, lubricating oil at 2% (v/v) was degraded on Day 20 (71.5). Furthermore, the biosurfactant demonstrated high stability at different ranges of salinity, pH, and temperature. Overall, the results indicated the potential use of B. salmalaya 139SI in environmental remediation processes.

Description: Objective: To evaluate the outcome of 80 pregnant women with systemic lupus erythematosus (SLE) and explore the risk factors for lupus flare, obstetric complications and fetal loss. Methods: 83 pregnancies in 80 women were divided into three groups. Group A: patients in remission for > 6 months before pregnancy, proteinuria 〈 0.5 g per day, without renal failure and discontinuation of cytotoxic drugs for > one year; Group B: patients with SLE disease activity in the six months before pregnancy; Group C: patients with new onset SLE during pregnancy. Results: In group A, 76.47% pregnancies achieved full-term deliveries and 80.39% achieved live born infants. In group B and C, the outcome was poor. Among 62 patients (64 pregnancies) diagnosed as SLE before pregnancy, SLE flares occurred in 27 (42.19%) pregnancies. SLE disease activity in the six months before pregnancy was significantly associated with lupus flare (OR 5.00, 95% CI 1.14–21.87, p = 0.03) and fetal loss. New onset lupus during pregnancy was independently associated with obstetric complications (OR 7.22, 95% CI 2.14–24.38, p = 0.001). Conclusions: The current study confirmed the previous report that SLE should be considered a high risk of pregnancy. If pregnancy is planned after remission for > 6 months, the favorable outcome can be achieved.

Description: Purpose: To determine the epidemiological characteristics of work-related eye injury in representative southwest region of China. Methods: Patients with eye injuries treated at the Ninth People’s Hospital of Chongqing from 1 January 2014 to 31 December 2014 were included in the current study. All patients completed a comprehensive examination and interview. Demographic characteristics and injury details were recorded. The International Classification of Diseases (ICD-10) and Birmingham Eye Trauma Terminology (BETT) were used. Results: The average age of eye injury patients was 37.52 years and the majority were male. Among the 1055 total patients, approximately 42.9% of the injuries were work-related. The highest proportion of occupational eye trauma was observed in the group between 36 and 45 years of age. Occupational ocular trauma occurred more frequently in summer, with most from 16:00 to 18:00. Metal was the most common injury cause. Foreign body on external eye was the most common diagnosis. Workers in the manufacturing industry without pre-work safety training or eye protection were far more likely to suffer from occupational ocular trauma than those with training and protection. Conclusions: This study provides insight into the epidemiological characteristics of occupational ocular trauma in southwest region of China. The current findings might be considered as a baseline for future research on regional work-related eye injuries. Our findings will provide valuable information for further development of preventive strategies.

Description: This paper reports on a study of the modelling, validation and analysis of an integrated 1 MW (electrical output) tri-generation system energized by solar energy. The impact of local climatic conditions in the Mediterranean region on the system performance was considered. The output of the system that comprised a parabolic trough collector (PTC), an organic Rankine cycle (ORC), single-effect desalination (SED), and single effect LiBr-H2O absorption chiller (ACH) was electrical power, distilled water, and refrigerant load. The electrical power was produced by the ORC which used cyclopentane as working fluid and Therminol VP-1 was specified as the heat transfer oil (HTO) in the collectors with thermal storage. The absorption chiller and the desalination unit were utilize the waste heat exiting from the steam turbine in the ORC to provide the necessary cooling energy and drinking water respectively. The modelling, which includes an exergetic analysis, focuses on the performance of the solar tri-generation system. The simulation results of the tri-generation system and its subsystems were produced using IPSEpro software and were validated against experimental data which showed good agreement. The tri-generation system was able to produce about 194 Ton of refrigeration, and 234 t/day distilled water.

Description: Battery energy storage systems (BESSs) have been widely used for microgrid control. Generally, BESS control systems are based on proportional-integral (PI) control techniques with the outer and inner control loops based on PI regulators. Recently, model predictive control (MPC) has attracted attention for application to future energy processing and control systems because it can easily deal with multivariable cases, system constraints, and nonlinearities. This study considers the application of MPC-based BESSs to microgrid control. Two types of MPC are presented in this study: MPC based on predictive power control (PPC) and MPC based on PI control in the outer and predictive current control (PCC) in the inner control loops. In particular, the effective application of MPC for microgrids with multiple BESSs should be considered because of the differences in their control performance. In this study, microgrids with two BESSs based on two MPC techniques are considered as an example. The control performance of the MPC used for the control microgrid is compared to that of the PI control. The proposed control strategy is investigated through simulations using MATLAB/Simulink software. The simulation results show that the response time, power and voltage ripples, and frequency spectrum could be improved significantly by using MPC.

Description: Soil water potential (Ψ) controls the dynamics of water in soils and can therefore affect greenhouse gas fluxes. We examined the relationship between soil moisture content (θ) at five different levels of water potential (Ψ = 0, −0.05, −0.1, −0.33 and −15 bar) and greenhouse gas (carbon dioxide, CO2; nitrous oxide, N2O and methane, CH4) fluxes. The study was conducted in 2011 in a silt loam soil at Freeman farm of Lincoln University. Soil samples were collected at two depths: 0–10 and 10–20 cm and their bulk densities were measured. Samples were later saturated then brought into a pressure plate for measurements of Ψ and θ. Soil air samples for greenhouse gas flux analyses were collected using static and vented chambers, 30 cm in height and 20 cm in diameter. Determination of CO2, CH4 and N2O concentrations from soil air samples were done using a Shimadzu Gas Chromatograph (GC-14). Results showed that there were significant correlations between greenhouse gas fluxes and θ held at various Ψ in the 0–10 cm depth of soil group. For instance, θ at Ψ = 0 positively correlated with measured CO2 (p = 0.0043, r = 0.49), N2O (p = 0.0020, r = 0.64) and negatively correlated with CH4 (p = 0.0125, r = −0.44) fluxes. Regression analysis showed that 24%, 41% and 19% of changes in CO2, N2O and CH4 fluxes, respectively, were due to θ at Ψ = 0 (p 〈 0.05). This study stresses the need to monitor soil water potential when monitoring greenhouse gas fluxes.

Description: A device (prototype) with a working volume of 200 L was used to deplete olive mill wastewater (OMW) of polyphenols. The OMW transformed into feedstock by means of the device was then used for feeding a lab-scale photobioreactor, just for testing the production of bioH2. The main novelty of this prototype consists in the combination of several adsorbent matrices and the exploitation of their synergic action. In this investigation, three matrices have been used: active carbon, Azolla and zeolite. The device was operated at an olive oil company located in the heart of the Chianti zone (Province of Florence, Italy). The efficiency of polyphenol removal obtained using the device was ≥96%. The multi-matrix effluent (MMeff) generated was then used to obtain three different culture broths containing 25%, 50% and 100% of MMeff, respectively. The diluted (with water) culture broths were suitable for hydrogen generation, with the highest hydrogen production rate (12.7 mL H2/Lculture/h) being obtained using 50% MMeff. The hydrogen yields were: 334 mL H2/L of MMeff, when feeding the photofermenter with pure effluent (100%); 1308 mL H2/L of MMeff, with the half-diluted effluent (50%, v/v); and 432 mL H2/L of MMeff, with the highest-diluted effluent (25%, v/v).

Description: Nutrient inputs from rivers play an important role in lake eutrophication. To compare the forms characteristics of phosphorus (P) and nitrogen (N) in rivers flowing through rural and urban areas, water samples were collected seasonally from five urban rivers and six rural rivers flowing to Lake Chaohu, China. Higher total phosphorus (TP), particulate phosphorus (PP), soluble reactive phosphorus (SRP), and dissolved nonreactive phosphorus (DNP) concentrations and SRP/TP percentages were observed in urban rivers than in rural rivers, and PP/TP and DNP/TP ratios were lower in urban rivers than in rural rivers. The concentrations of total nitrogen (TN) and all N forms other than dissolved organic nitrogen (DON) were significantly higher in urban rivers than in rural rivers. NH4+/TN levels were higher in urban rivers, whereas PN/TN and DON/TN ratios were significantly lower in urban rivers compared with rural rivers. NO3−/TN and NO2−/TN levels were similar between the two groups of rivers. TP, BD-P, and NaOH-P levels in urban river surface sediments were significantly higher than those in rural rivers. NaOH-P/TP ratios were significantly elevated in urban rivers, whereas HCl-P/TP and Res-P/TP ratios were significantly lower compared with rural rivers. Urban rivers have transferred large quantities of NH4+ and SRP into Lake Chaohu, resulting in higher TP and TN levels and NH4+/TN and SRP/TP ratios. Decreasing the input of NH4+ and SRP into urban rivers is a high priority for mitigating eutrophication and algal blooms in Lake Chaohu.

Description: Published evidence on the impact of the integration of International Board Certified Lactation Consultants (IBCLCs) for breastfeeding promotion is growing, but still relatively limited. Our study aims at evaluating the effects of adding an IBCLC for breastfeeding support in a mother and child hospital environment. We conducted a prospective study in the maternity ward of our maternal and child health Institute, recruiting 402 mothers of healthy term newborns soon after birth. The 18-month intervention of the IBCLC (Phase II) was preceded (Phase I) by data collection on breastfeeding rates and factors related to breastfeeding, both at hospital discharge and two weeks later. Data collection was replicated just before the end of the intervention (Phase III). In Phase III, a significantly higher percentage of mothers: (a) received help to breastfeed, and also received correct information on breastfeeding and community support, (b) started breastfeeding within two hours from delivery, (c) reported a good experience with the hospital staff. Moreover, the frequency of sore and/or cracked nipples was significantly lower in Phase III. However, no difference was found in exclusive breastfeeding rates at hospital discharge or at two weeks after birth.

Description: Currently, use and disposal of plastic by consumers through waste management activities in Ghana not only creates environmental problems, but also reinforces the notion of a wasteful society. The magnitude of this problem has led to increasing pressure from the public for efficient and practical measures to solve the waste problem. This paper analyses the impact of plastic use and disposal in Ghana. It emphasizes the need for commitment to proper management of the impacts of plastic waste and effective environmental management in the country. Sustainable Solid Waste Management (SSWM) is a critical problem for developing countries with regards to climate change and greenhouse gas emission, and also the general wellbeing of the populace. Key themes of this paper are producer responsibility and management of products at end of life. The paper proposes two theatrical recovery models that can be used to address the issue of sachet waste in Ghana.

Description: The determinations of heat collection rate and heat loss coefficient are crucial for the evaluation of in service water-in-glass evacuated tube solar water heaters. However, the direct determination requires complex detection devices and a series of standard experiments, which also wastes too much time and manpower. To address this problem, we propose machine learning models including artificial neural networks (ANNs) and support vector machines (SVM) to predict the heat collection rate and heat loss coefficient without a direct determination. Parameters that can be easily obtained by “portable test instruments” were set as independent variables, including tube length, number of tubes, tube center distance, heat water mass in tank, collector area, final temperature and angle between tubes and ground, while the heat collection rate and heat loss coefficient determined by the detection device were set as dependent variables respectively. Nine hundred fifteen samples from in-service water-in-glass evacuated tube solar water heaters were used for training and testing the models. Results show that the multilayer feed-forward neural network (MLFN) with 3 nodes is the best model for the prediction of heat collection rate and the general regression neural network (GRNN) is the best model for the prediction of heat loss coefficient due to their low root mean square (RMS) errors, short training times, and high prediction accuracies (under the tolerances of 30%, 20%, and 10%, respectively).

Description: The microbiological and chemical drinking water quality of 20 vulnerable Finnish small groundwater supplies was studied in relation to environmental risk factors associated with potential sources of contamination. The microbiological parameters analyzed included the following enteric pathogens: Giardia and Cryptosporidium, Campylobacter species, noroviruses, as well as indicator microbes (Escherichia coli, intestinal enterococci, coliform bacteria, Clostridium perfringens, Aeromonas spp. and heterotrophic bacteria). Chemical analyses included the determination of pH, conductivity, TOC, color, turbidity, and phosphorus, nitrate and nitrite nitrogen, iron, and manganese concentrations. Giardia intestinalis was detected from four of the water supplies, all of which had wastewater treatment activities in the neighborhood. Mesophilic Aeromonas salmonicida, coliform bacteria and E. coli were also detected. None of the samples were positive for both coliforms and Giardia. Low pH and high iron and manganese concentrations in some samples compromised the water quality. Giardia intestinalis was isolated for the first time in Finland in groundwater wells of public water works. In Europe, small water supplies are of great importance since they serve a significant sector of the population. In our study, the presence of fecal indicator bacteria, Aeromonas and Giardia revealed surface water access to the wells and health risks associated with small water supplies.

Description: According to the increasing worldwide attention to energy and the environmental performance of the building sector, building energy demand should be minimized by considering all energy uses. In this regard, the development of building components characterized by proper values of thermal transmittance, thermal capacity, and radiative properties is a key strategy to reduce the annual energy need for the microclimatic control. However, the design of the thermal characteristics of the building envelope is an arduous task, especially in temperate climates where the energy demands for space heating and cooling are balanced. This study presents a novel methodology for optimizing the thermo-physical properties of the building envelope and its coatings, in terms of thermal resistance, capacity, and radiative characteristics of exposed surfaces. A multi-objective approach is adopted in order to optimize energy performance and thermal comfort. The optimization problem is solved by means of a Genetic Algorithm implemented in MATLAB®, which is coupled with EnergyPlus for performing dynamic energy simulations. For demonstration, the methodology is applied to a residential building for two different Mediterranean climates: Naples and Istanbul. The results show that for Naples, because of the higher incidence of cooling demand, cool external coatings imply significant energy savings, whereas the insulation of walls should be high but not excessive (no more than 13–14 cm). The importance of high-reflective coating is clear also in colder Mediterranean climates, like Istanbul, although the optimal thicknesses of thermal insulation are higher (around 16–18 cm). In both climates, the thermal envelope should have a significant mass, obtainable by adopting dense and/or thick masonry layers. Globally, a careful design of the thermal envelope is always necessary in order to achieve high-efficiency buildings.

Description: In recent years, global climate change has altered precipitation patterns, causing uneven spatial and temporal distribution of precipitation that gradually induces precipitation polarization phenomena. Taiwan is located in the subtropical climate zone, with distinct wet and dry seasons, which makes the polarization phenomenon more obvious; this has also led to a large difference between river flows during the wet and dry seasons, which is significantly influenced by precipitation, resulting in hydrological drought. Therefore, to effectively address the growing issue of water shortages, it is necessary to explore and assess the drought characteristics of river systems. In this study, the drought characteristics of northern Taiwan were studied using the streamflow drought index (SDI) and Markov chains. Analysis results showed that the year 2002 was a turning point for drought severity in both the Lanyang River and Yilan River basins; the severity of rain events in the Lanyang River basin increased after 2002, and the severity of drought events in the Yilan River basin exhibited a gradual upward trend. In the study of drought severity, analysis results from periods of three months (November to January) and six months (November to April) have shown significant drought characteristics. In addition, analysis of drought occurrence probabilities using the method of Markov chains has shown that the occurrence probabilities of drought events are higher in the Lanyang River basin than in the Yilan River basin; particularly for extreme events, the occurrence probability of an extreme drought event is 20.6% during the dry season (November to April) in the Lanyang River basin, and 3.4% in the Yilan River basin. This study shows that for analysis of drought/wet occurrence probabilities, the results obtained for the drought frequency and occurrence probability using short-term data with the method of Markov chains can be used to predict the long-term occurrence probability of drought/wet events.

Description: Proper lighting is vital to improve, from an artistic point of view, the surface expanse and decorative detailing of architectural heritage buildings considered valuable. When properly lit, monumental buildings can become to onlookers an essential part of the city. Nowadays, for design planners dealing with the improvement of buildings, whose architectural design should be valorized, the real challenge is to combine the lighting artistic requirements with scrupulous economic management in order to limit the energy demand and to respect the environment. For these reasons, this case study examines the lighting of the monumental façade and the cloister of St. Peter in Chains situated in the Faculty of Engineering of Sapienza University of Rome. The present lighting installation, characterized by metal halides, compact fluorescent and halogen lamps, is compared with an alternative scenario presenting LED lamps and scenographic lighting of the monumental façade. Such comparison is based on the evaluation of the lighting levels for different visual tasks and on energy and maintenance issues; the first analysis was performed through the software DIALux Evo 4.0, whereas the second was performed using ecoCALC. This study leads to the conclusion that the lighting levels of the solution presenting LED lamps are better than those of the present solution, and they comply with current standards. Finally, the higher costs of LED lamp installations and the scenographic lighting of the monumental façade are balanced by lower maintenance costs, with a payback period of seven years.

Description: Customer expectations can be extremely nebulous. This research identifies the demographic segmentations and their respective expectations for the spa market. Interviews were conducted and a subsequent questionnaire was employed to gather the voice of the customer and assess the expectations of spa clientele. All of the data was collected from luxury spas in Hawaii, and consisted of respondents from all over the world. Results of the survey suggest that while men want more tangible benefits of a spa, women prefer the experiential qualities of peace and rejuvenation. Additionally, those of lower to middle income focus on the atmosphere more than wealthier clients, who are looking for more long term spa benefits, such as a more youthful appearance.

Description: Any World Heritage Cultural Landscape requires a clear boundary for administration. One of the administrative goals is sustainability. There is no widely identified way to demarcate the boundary of a World Heritage Cultural Landscape. This paper aims to explore a methodology framework to provide a holistic perspective for demarcating boundaries for a World Heritage Cultural Landscape. Honghe Hani Rice Terraces (HHRT) in Yunnan Province is a new World Heritage Cultural Landscape in China. We use it as a research area to illustrate the methodology framework. The framework of methodology is constructed based on four scales of a human-environment system identified by Anne Buttimer. It is used to describe the level of the sustainability of local economy, social organization, natural environment and people’s understanding of the human-environment. Four types of boundaries were investigated in this area. They are the boundary of Malizhai River Basin, the boundary of local water-allocation organization, the boundary of the economic network and the perceptual boundary of the human-environment system. With a comprehensive perspective, we integrated the four types of boundaries to judge the boundary of the core area of HHRT by three criteria, they are: Environmental sustainability, social justice, and the ability to create a new human-environment system. We conclude that some parts of the boundary of the core area of HHRT do not fit the criteria of sustainable development.

Description: A state-of-health (SOH) estimation method for electric vehicles (EVs) is presented with three main advantages: (1) it provides joint estimation of cell’s aging states in terms of power and energy (i.e., SOHP and SOHE)—because the determination of SOHP and SOHE can be reduced to the estimation of the ohmic resistance increase and capacity loss, respectively, the ohmic resistance at nominal temperature will be taken as a health indicator, and the capacity loss is estimated based on a mechanistic model that is developed to describe the correlation between resistance increase and capacity loss; (2) it has wide applicability to various ambient temperatures—to eliminate the effects of temperature on the resistance, another mechanistic model about the resistance against temperature is presented, which can normalize the resistance at various temperatures to its standard value at the nominal temperature; and (3) it needs low computational efforts for on-board application—based on a linear equation of cell’s dynamic behaviors, the recursive least-squares (RLS) algorithm is used for the resistance estimation. Based on the designed performance and validation experiments, respectively, the coefficients of the models are determined and the accuracy of the proposed method is verified. The results at different aging states and temperatures show good accuracy and reliability.

Description: Producing domestic hot water (DHW) with a ground source heat pump (GSHP) is challenging due to the high temperature (HT) of DHW. There are many studies proving the better performance of cascade heat pumps compared to single-stage heat pumps when the difference between the condensing and the evaporation temperature is large. In this system approach study, different GSHP arrangements are described and computationally compared. A two-stage heat pump arrangement is introduced in which water tanks of the heating system are utilized for warming up the DHW in two stages. It is shown that the electricity consumption with this two-stage system is approximately 31% less than with the single-stage heat pump and 12% less than with the cascade system. Further, both low temperature (LT) and HT heat pumps can run alone, which is not common in cascade or other two-stage heat pumps. This is advantageous because the high loads of the space heating and DHW production are not simultaneous. Proper insulation of the DHW and recirculation pipe network is essential, and drying towel rails or other heating coils should be avoided when aiming for a high efficiency. The refrigerants in the calculations are R407C for the LT heat pump and R134a for the HT heat pump. Investment costs are excluded from calculations.

Description: For 20 years, the number of resource policy approaches with direct and indirect relations to raw materials, resource and material efficiency has grown enormously at national and international level. This discussion paper makes an inventory of different political and regulatory approaches that contain a direct or indirect reference to resources such as construction materials, industrial minerals, or metals. They are examined and evaluated regarding foci and resource priorities as well as further categories such as target lines, governance levels, indicators used, integration into wider target systems, specification, and implementation. The aim is to provide an overview of the spectrum of resource objectives in international, European, and national strategies, programs, and initiatives. The closer analysis of raw material targets embedded in the policy programs and legal approaches reveals that most goals lack a time frame and a concrete vision, thus remain at a strategic level. To complement the overview, the state of research in the field of modeling and simulation is briefly discussed. Concluding remarks concerning their relation to the objectives identified and the task of target setting complete the discussion.

Description: The growth economy imposes multiple crises on humanity and the natural world. To challenge this economic growth imperative, the degrowth movement emerges as a dissident response. Although within an economic growth perspective, payments for ecosystem services (PES) have also been proposed to attenuate the negative impacts of capitalism, as a redistributive mechanism that is claimed to deliver equitable conservation and sustainability. Degrowth has notably similar concerns, although it is inclined to argue against PES traditional ideologies and practices, which lead conservation to perceive nature within economic growth and market ideologies, diminishing the relationship between humans and nature. In spite of that, PES are becoming a strong trend in environmental governance. This paper attempts to examine whether PES are, and how they could be suitable for degrowth, through the lens of its main sources. In order to integrate PES and degrowth, it could require a PES reconceptualization. Although we assert that PES are not the most appropriate instrument for conservation, we argue that maybe PES could contribute to degrowth as a transition instrument toward fostering better practices. However, it is important to elucidate how they can be used and under which circumstances they could be appropriate.

Description: This research paper aims at developing and applying a constructive weighting methodology for the elicitation of local stakeholders’ preferences regarding a set of sustainability evaluation criteria during the assessment of low-carbon energy technologies. The overall methodology has been applied and tested for the sustainability evaluation of selected low-carbon energy technologies in Europe from a local stakeholders’ perspective. The researchers applied a constructive weighting methodology based on different Multiple Criteria Analysis (MCA) techniques to test the consistency of stakeholders’ preferences. The methodology was piloted based on a small-scale European local stakeholders’ survey within the framework of Covenant CapaCITY, an Intelligent Energy Europe project that supports the development of Sustainable Energy Action Plans (SEAPs). It became evident that the local stakeholders who participated placed high priorities on aspects such as CO2eq emissions reduction, ecosystem damages reduction, and resilience to climate change during the evaluation of low-carbon energy technologies. Considering the overall energy technologies assessment, wind off-shore, solar PV, hydropower, and wind on-shore achieved the highest scores and better reflected the priorities of local stakeholders considering a large set of multiple sustainability criteria. The high number of criteria led to some inconsistencies of stakeholders’ preferences, confirming the need for consistency checks and/or combining different methods of preference elicitation.

Description: In this study, we allocate Greenhouse gas (GHG) emissions of electricity transmission to the consumers. As an allocation basis, we introduce energy distance. Energy distance takes the transmission load on the electricity energy system into account in addition to the amount of electricity consumption. As a case study, we estimate regional GHG emissions of electricity transmission loss in Chile. Life cycle assessment (LCA) is used to estimate the total GHG emissions of the Chilean electric power system. The regional GHG emission of transmission loss is calculated from the total GHG emissions. We construct the network model of Chilean electric power grid as an undirected network with 466 nodes and 543 edges holding the topology of the power grid based on the statistical record. We analyze the total annual GHG emissions of the Chilean electricity energy system as 23.07 Mt CO2-eq. and 1.61 Mt CO2-eq. for the transmission loss, respectively. The total energy distance for the electricity transmission accounts for 12,842.10 TWh km based on network analysis. We argue that when the GHG emission of electricity transmission loss is estimated, the electricity transmission load should be separately considered. We propose network theory as a useful complement to LCA analysis for the complex allocation. Energy distance is especially useful on a very large-scale electric power grid such as an intercontinental transmission network.

Description: Recently, as more people are concerned with the issues around environment protection, research about how to reduce carbon emissions has drawn increasing attention. Encouraging public transportation is an effective measure to reduce carbon emissions. However, overland public transportation does less to lower carbon because of the gradually increasing pressure of the urban road traffic. Therefore, the waterbus along the coast becomes a new direction of the urban public transport development. In order to optimize the operation plan of the waterbus, a bi-level model considering carbon emissions is proposed in this paper. In the upper-level model, a multiple objective model is established, which considers both the interests of the passengers and the operator while considering the carbon emissions. The lower-level model is a traffic model split by using a Nested Logit model. A NSGA-II (Non-dominated Sorting Genetic Algorithm-II) algorithm is proposed to solve the model. Finally, the city of Zhoushan is chosen as an example to prove the feasibility of the model and the algorithm. The result shows that the proposed model for waterbus operation optimization can efficiently reduce transportation carbon emissions and satisfy passenger demand at the same time.

Description: A person’s image, which is determined through physical appearance, considerably affects self-esteem developed from early childhood. Scoliosis causes multiple trunk deformations that can affect a person’s perception of the body. The aim of the study was to analyze the impact of scoliosis dimension and the degree of trunk deformation on the level of self-esteem and sexual functioning in women with idiopathic scoliosis. Thirty-six women diagnosed with idiopathic scoliosis were recruited to a prospective, double-blind, randomized controlled trial. The subjects were divided into two groups depending on the value of the Cobb angle. The level of self-esteem was determined by means of the Rosenberg Self-Esteem Scale (SES), whereas the sexual functioning was assessed via the Female Sexual Function Index (FSFI). The trunk deformations were specified with the Posterior Trunk Symmetry Index (POTSI). A statistically significant correlation was proved between the amount of points received in the Rosenberg scale evaluation and the POTSI index in Group A (R = −0.56, p = 0.04). Subjects with smaller deformations within the coronal plane had a higher level of self-confidence. The trunk asymmetries in the coronal plane may have a negative effect on women with scoliosis and their self-appraisal.

Description: Thermostatically controlled loads (TCLs), such as air conditioners (ACs), are important demand response resources—they have a certain heat storage capacity. A change in the operating status of an air conditioner in a small range will not noticeably affect the users’ comfort level. Load control of TCLs is considered to be equivalent to a power plant of the same capacity in effect, and it can significantly reduce the system pressure to peak load shift. The thermodynamic model of air conditioning can be used to study the aggregate power of a number of ACs that respond to the step signal of a temperature set point. This paper analyzes the influence of the parameters of each AC in the group to the indoor temperature and the total load, and derives a simplified control model based on the two order linear time invariant transfer function. Then, the stability of the model and designs its Proportional-Integral-Differential (PID) controller based on the particle swarm optimization (PSO) algorithm is also studied. The case study presented in this paper simulates both scenarios of constant ambient temperature and changing ambient temperature to verify the proposed transfer function model and control strategy can closely track the reference peak load shifting curves. The study also demonstrates minimal changes in the indoor temperature and the users’ comfort level.

Description: In room–corridor building geometry, the corridor smoke temperature is of great importance to fire protection engineering as indoor fires occur. Theoretical analysis and a set of reduced-scale model experiments were performed, and a virtual fire model was proposed, to investigate the correlations between the maximum smoke temperature in corridors and the smoke temperature in rooms. The results show that the dimensionless virtual fire heat release rate (HRR) is characterized by quadratic-polynomial of the dimensionless smoke temperature in fire rooms. The dimensionless distance from a virtual fire source to the corridor ceiling varies linearly with the dimensionless smoke temperature in a room. Results of multiple regression indicate that, at the impingement area of virtual fire, the dimensionless maximum smoke temperature in corridors is only related to the dimensionless virtual fire HRR; in the non-impingement area of a virtual fire, the dimensionless maximum smoke temperature in corridors is a function of the dimensionless virtual fire HRR and dimensionless longitude distance. The viscosity and conduction exhibit an insignificant impact on the maximum temperature in the corridor. Through replacing the parameters of virtual fire with the dimensionless smoke temperature in fire rooms, the correlations between dimensionless maximum temperature in corridors and the dimensionless smoke temperature in fire rooms were proposed.

Description: Changes in agriculture, including simultaneous intensification and abandonment, have significantly shaped the evolution of rural areas. The assessment of resilience in agricultural systems could provide insights into the ability of many rural areas to survive and regain competitiveness following disturbances. The aim of this study is to use the adaptive cycle heuristic as a diagnostic tool to study dynamics of change in two agricultural sectors (durum wheat/sheep and goat farming) in the Basilicata region of Southern Italy over the last seventy years. The heuristic was applied through a participatory approach in a community of stakeholders who have conceived, in collaboration with researchers, the Manifesto “Let’s Think Basilicata” as a regional instrument of analysis and a laboratory of ideas and development of proposals. Despite some methodological difficulties, the adaptive cycle heuristic proved useful to describe processes of change in the socio-ecological system and could have enormous potential in shaping policy instruments for rural areas. However, much greater research is needed, both in terms of theory and methodology, before policy impacts on resilience in socio-ecological systems can be fully understood.

Description: In developing countries, the drinking water supply is still an open issue. In sub-Saharan Africa, only 68% of the population has access to improved sources of drinking water. Moreover, some regions are affected by geogenic contaminants (e.g., fluoride and arsenic) and the lack of access to sanitation facilities and hygiene practices causes high microbiological contamination of drinking water in the supply chain. The Water Safety Plan (WSP) approach introduced by the World Health Organisation (WHO) in 2004 is now under development in several developing countries in order to face up to these issues. The WSP approach was elaborated within two cooperation projects implemented in rural areas of Burkina Faso and Senegal by two Italian NGOs (Non-Governmental Organisations). In order to evaluate its sustainability, a questionnaire based on five different sustainability elements and a cost and time consumption evaluation were carried out and applied in both the case studies. Results demonstrated that the questionnaire can provide a useful and interesting overview regarding the sustainability of the WSP; however, further surveys in the field are recommended for gathering more information. Time and costs related to the WSP elaboration, implementation, and management were demonstrated not to be negligible and above all strongly dependent on water quality and the water supply system complexity.

Description: The development of cities has always had a very close relation with water. However, cities directly impact land use patterns and greatly change natural landscapes, aggravating floods. Considering this situation, this paper intends to discuss lowland occupation and city sustainability in what regards urban stormwater management, fluvial space, and river restoration, aiming at minimizing flood risks and improving natural and built environment conditions. River plains tend to be attractive places for a city to grow. From ancient times, levees have been used to protect lowland areas along major watercourses to allow their occupation. However, urban rivers demand space for temporary flood storage. From a systemic point of view, levees along extensive river reaches act as canalization works, limiting river connectivity with flood plains, rising water levels, increasing overtopping risks and transferring floods downstream. Departing from this discussion, four case studies in the Iguaçu-Sarapuí River Basin, a lowland area of Rio de Janeiro State, Brazil, are used to compose a perspective in which the central point refers to the need of respecting watershed limits and giving space to rivers. Different aspects of low-lying city planning are discussed and analyzed concerning the integration of the built and natural environments.

Description: With the microgrid revolution, each house will have the ability to meet its own energy needs locally from renewable energy sources such as solar or wind. However, real-time data gathering, energy management and control of renewable energy systems will depend mainly on the performance of the communications infrastructure. This paper describes the design of a communication network architecture using both wired and wireless technologies for monitoring and controlling distributed energy systems involving small-scale wind turbines and photovoltaic systems. The proposed communication architecture consists of three layers: device layer, network layer, and application layer. Two scenarios are considered: a smart-house and a smart-building. Various types of sensor nodes and measurement devices are defined to monitor the condition of the renewable energy systems based on the international electrotechnical commission standard. The OPNET Modeler is used for performance evaluation in terms of end-to-end (ETE) delay. The network performance is compared in view of ETE delay, reliability and implementation cost for three different technologies: Ethernet-based, WiFi-based, and ZigBee-based.

Description: Heat flow of the sedimentary succession of the Eastern Canada Sedimentary Basins varies from 40 mW/m2 close to the exposed shield in the north to high 60–70 mW/m2 in the southwest–northeast St. Lawrence corridor. As high fluid flow rates are required for a successful geothermal application, the most important targets are deep existing permeable aquifers rather than hard rock, which would need to be fracked. Unfortunately, the ten most populated Québec urban centers are in the areas where the Grenville (Canadian Shield) is exposed or at shallow depths with sedimentary cover where temperatures are 30 °C or less. The city of Drummondville will be the exception, as the basement deepens sharply southwest, and higher temperatures reaching >120 °C are expected in the deep Cambrian sedimentary aquifers near a 4–5-km depth. Deep under the area where such sediments could be occurring under Appalachian nappes, temperatures significantly higher than 140 °C are predicted. In parts of the deep basin, temperatures as high as 80 °C–120 °C exist at depths of 3–4 km, mainly southeast of the major geological boundary: the Logan line. There is a large amount of heat resource at such depths to be considered in this area for district heating.

Description: This research looks at coupling desalination with renewable energy sources to create a high-value product (treated water) from two low value resources (brackish groundwater and intermittent solar energy). Desalination of brackish groundwater is already being considered as a potential new water supply in Texas. This research uses Texas as a testbed for spatially-resolved analysis techniques while considering depth to brackish groundwater, water quality, and solar radiation across Texas to determine the locations with the best potential for integrating solar energy with brackish groundwater desalination. The framework presented herein can be useful for policymakers, regional planners, and project developers as they consider where to site desalination facilities coupled with solar photovoltaics. Results suggest that the northwestern region of Texas—with abundant sunshine and groundwater at relatively shallow depths and low salinity in areas with freshwater scarcity—has the highest potential for solar powered desalination. The range in capacity for solar photovoltaic powered reverse osmosis desalination was found to be 1.56 × 10—6 to 2.93 × 10—5 cubic meters of water per second per square meter of solar panel (m3/s/m2).

Description: Ground source heat pump (GSHP) systems have been proven to have higher efficiency compared to conventional air source heat pump systems for space heating and cooling applications. While vertical ground heat exchangers (GHE) are favorable in GSHP installation, this type of configuration requires higher capital costs as opposed to horizontal configuration. Numerical simulation has been used to accurately predict the thermal performance of GHE. In this paper, numerical analysis of thermal performance for slinky horizontal GHE loops in different orientations and operation modes is discussed. It was found that the loop orientation is not so important due to the little effect it has on thermal performance. While the mean heat exchange rate of copper loop increases 48% compared to HDPE loop, the analysis supports the common claim that heat exchange rate is predominantly limited by the thermal conductivity of the ground. With the same amount of circulation work, the mean heat exchange rate increases by 83%–162% when operated in parallel loops operations. The performance in these operations can be further optimized to 10%–14% increase when spacing between adjacent loops was provided. The spacing helps to minimize interference of heat flow that would penalize the overall thermal performance.

Description: Small Island Developing States (SIDS) of the Pacific over the last decade have established some of the most ambitious renewable energy targets in the world. The promotion of renewable energy has been motivated by a desire to lessen dependence on fossil fuels, given the adverse economic impacts of high oil prices on these countries. Efforts to attract development assistance and to strengthen the position of Pacific SIDS in climate change negotiations have likely also played a role. This paper explores the development of renewable energy resources in the Pacific through a public policy lens. The ambitious renewable energy targets established by Pacific SIDS are argued to be appropriate in some cases, but in other cases are criticised on economic grounds. A potential trade-off is identified between the risk mitigation benefits and poverty alleviation benefits of different renewable technology investments, with questions raised about whether support for the former rather than the latter by development partners is appropriate. A number of institutional and financial challenges to the development of renewable energy resources in Pacific SIDS are also discussed.

Description: In this paper, we present the results of an economic feasibility study and propose a system structure to test and maintain electrical stability. In addition, we present real operation results after constructing a remote microgrid on an island in South Korea. To perform the economic feasibility study, a commercial tool called HOMER was used. The developed remote microgrid consists of a 400 kW wind turbine (WT) generator, 314 kW photovoltaic (PV) generator, 500 kVA × 2 grid forming inverter, 3 MWh lithium ion battery, and an energy management system (EMS). The predicted renewable energy fraction was 91% and real operation result was 82%. The frequency maintaining rate of the diesel power plants was 57% but the remote microgrid was 100%. To improve the operating efficiency of the remote microgrid, we investigated the output range of a diesel generator.

Description: Low energy X-ray fluorescence (XRF) and soft X-ray absorption (XAS) microspectroscopies at high space-resolution are employed for the investigation of the coelectrodeposition of composites consisting of a polypyrrole(PPy)-matrix and Mn-based ternary dispersoids, that have been proposed as promising electrocatalysts for oxygen-reduction electrodes. Specifically, we studied Mn–Co–Cu/PP, Mn–Co–Mg/PPy and Mn–Ni–Mg/PPy co-electrodeposits. The Mn–Co–Cu system features the best ORR electrocatalytic activity in terms of electron transfer number, onset potential, half-wave potential and current density. XRF maps and micro-XAS spectra yield compositional and chemical state distributions, contributing unique molecular-level information on the pulse-plating processes. Mn, Ni, Co and Mg exhibit a bimodal distribution consisting of mesoscopic aggregates of micrometric globuli, separated by polymer-rich ridges. Within this common qualitative scenario, the individual systems exhibit quantitatively different chemical distribution patterns, resulting from specific electrokinetic and electrosorption properties of the single components. The electrodeposits consist of Mn3+,4+-oxide particles, accompanied by combinations of Co0/Co2+, Ni0/Ni2+ and Cu0,+/Cu2+ resulting from the alternance of cathodic and anodic pulses. The formation of highly electroactive Mn3+,4+ in the as-fabricated material is a specific feature of the ternary systems, deriving from synergistic stabilisation brought about by two types of bivalent dopants as well as by galvanic contact to elemental metal; this result represents a considerable improvement in material quality with respect to previously studied Mn/PPy and Mn-based/PPy binaries.

Description: The countries of the Gulf Cooperation Council (GCC) have both large fossil fuel resources and vast renewable energy potentials. Here, we investigate in a literature meta-analysis and a survey, whether there is a need for renewables in the GCC, what barriers and risks presently deter investments, and what possible policy-solutions could be. We find that there is a long-term need for renewables, to diversify the economy and prepare for a post-fossil fuel era. In the short term, two main obstacles deter investments: inefficient bureaucracy, and the combination of fossil fuel/electricity subsidies and the absence of renewable energy support. Removing fossil fuel and consumption subsidies or introducing a support scheme could make investments in renewables profitable. Eliminating energy subsidies appears particularly beneficial to the economic outlook but this seems particularly difficult to implement, due to the political economy of rentier states. Increased bureaucratic transparency and efficiency is needed, so that potentially attractive investments can rapidly and predictably obtain the necessary permissions. Hence, the administrative and economic environment for renewable energy investments in the GCC is not right today, and no breakthrough is on the horizon, but there is a range of policy solutions to enable investments in the future.

Description: This study was conducted to develop an artificial neural network (ANN)-based prediction model that can calculate the amount of cooling energy during the setback period of accommodation buildings. By comparing the amount of energy needed for diverse setback temperatures, the most energy-efficient optimal setback temperature could be found and applied in the thermal control logic. Three major processes that used the numerical simulation method were conducted for the development and optimization of an ANN model and for the testing of its prediction performance, respectively. First, the structure and learning method of the initial ANN model was determined to predict the amount of cooling energy consumption during the setback period. Then, the initial structure and learning methods of the ANN model were optimized using parametrical analysis to compare its prediction accuracy levels. Finally, the performance tests of the optimized model proved its prediction accuracy with the lower coefficient of variation of the root mean square errors (CVRMSEs) of the simulated results and the predicted results under generally accepted levels. In conclusion, the proposed ANN model proved its potential to be applied to the thermal control logic for setting up the most energy-efficient setback temperature.

Description: The non-uniform surface temperature distribution of a battery cell results from complex reactions inside the cell and makes efficient thermal management a challenging task. This experimental work attempts to determine the evolution of surface temperature distribution of three pouch type commercial cells: Nickel Manganese Cobalt oxide (NMC)-based 20 Ah cell, Lithium Iron Phosphate (LFP) 14 Ah, and Lithium Titanate Oxide (LTO) 5 Ah battery cell by using contact thermistor and infrared (IR) thermography. High current (up to 100 A) continuous charge/discharge and high current (80 A) micro pulse cycling profile were applied on the cells. It was found that thermistor based temperature profile varied cell to cell, especially the LTO cell. Among the investigated cells, the NMC cell shows highest temperature rise and the LTO cell the lowest rise. IR (Infrared) images revealed the spatial distribution of surface temperature, in particular the location of the hottest region varies depending not only on the geometrical and material properties of the cell, but also the type of loads applied on the cells. Finally, a modeling perspective of the cell temperature non-uniformity is also discussed.

Description: A novel metal borohydride ammonia-borane complex Ca(BH4)2·NH3BH3 is characterized as the decomposition product of the recently reported perovskite-type metal borohydride NH4Ca(BH4)3, suggesting that ammonium-based metal borohydrides release hydrogen gas via ammonia-borane-complexes. For the first time the concept of proton-hydride interactions to promote hydrogen release is applied to a cation-anion pair in a complex metal hydride. NH4Ca(BH4)3 is prepared mechanochemically from Ca(BH4)2 and NH4Cl as well as NH4BH4 following two different protocols, where the synthesis procedures are modified in the latter to solvent-based ball-milling using diethyl ether to maximize the phase yield in chlorine-free samples. During decomposition of NH4Ca(BH4)3 pure H2 is released, prior to the decomposition of the complex to its constituents. As opposed to a previously reported adduct between Ca(BH4)2 and NH3BH3, the present complex is described as NH3BH3-stuffed α-Ca(BH4)2.

Description: To investigate the association of the hygiene index values of live fresh aquatic products and food-borne diarrhea in the population of the Ningbo area in China. Volatile basic nitrogen (VBN), histamine (HIS), indole, tetrodotoxin (TTX), and paralytic, neurotoxic, amnesic and diarrhetic shellfish poisons (PSP, NSP, ASP, and DSP, respectively) in the samples of live fresh aquatic products and food-borne diarrhea cases in six studied districts were analyzed. Results indicate that the incidence rate of food-borne diarrhea is related to the hygiene index values. Aside from VBN, the main risk factors related to food-borne diarrhea in edible aquatic products include DSP (in marine fish, shrimp, and other shellfishes), NSP, and ASP (in marine shrimp and crab). Hygiene index values among different species were significantly different. No significant difference in the monitoring index values was found among the six different studied districts. The reported cases of food-borne diarrhea were positively associated with VBN and DSP in aquatic products in Haishu, Jiangbei, Zhenhai, and Beilun, as well as VBN and NSP in aquatic products in Jiangdong and Yinzhou. In conclusion, VBN, DSP, NSP, and ASP are important risk factors for the occurring of food-borne diarrhea in the population of the Ningbo area in China.

Description: Background: The relationship between policy networks and policy development among local health departments (LHDs) is a growing area of interest to public health practitioners and researchers alike. In this study, we examine policy activity and ties between public health leadership across large urban health departments. Methods: This study uses data from a national profile of local health departments as well as responses from a survey sent to three staff members (local health official, chief of policy, chief science officer) in each of 16 urban health departments in the United States. Network questions related to frequency of contact with health department personnel in other cities. Using exponential random graph models, network density and centrality were examined, as were patterns of communication among those working on several policy areas using exponential random graph models. Results: All 16 LHDs were active in communicating about chronic disease as well as about use of alcohol, tobacco, and other drugs (ATOD). Connectedness was highest among local health officials (density = .55), and slightly lower for chief science officers (d = .33) and chiefs of policy (d = .29). After accounting for organizational characteristics, policy homophily (i.e., when two network members match on a single characteristic) and tenure were the most significant predictors of formation of network ties. Conclusion: Networking across health departments has the potential for accelerating the adoption of public health policies. This study suggests similar policy interests and formation of connections among senior leadership can potentially drive greater connectedness among other staff.

Description: In 2007, the EU established challenging goals for all Member States with the aim of obtaining 20% of their energy consumption from renewables, and offshore wind is expected to be among the renewable energy sources contributing highly towards achieving this target. Currently wind turbines are designed for a 25-year service life with the possibility of operational extension. Extending their efficient operation and increasing the overall electricity production will significantly increase the return on investment (ROI) and decrease the levelized cost of electricity (LCOE), considering that Capital Expenditure (CAPEX) will be distributed over a larger production output. The aim of this paper is to perform a detailed failure mode identification throughout the service life of offshore wind turbines and review the three most relevant end of life (EOL) scenarios: life extension, repowering and decommissioning. Life extension is considered the most desirable EOL scenario due to its profitability. It is believed that combining good inspection, operations and maintenance (O&M) strategies with the most up to date structural health monitoring and condition monitoring systems for detecting previously identified failure modes, will make life extension feasible. Nevertheless, for the cases where it is not feasible, other options such as repowering or decommissioning must be explored.

Description: Computer work is characterized by sedentary static workload with low-intensity energy metabolism. The aim of our study was to evaluate the dynamics of skin surface temperature in the hand during prolonged computer mouse work under different ergonomic setups. Digital infrared imaging of the right forearm and wrist was performed during three hours of continuous computer work (measured at the start and every 15 minutes thereafter) in a laboratory with controlled ambient conditions. Four people participated in the study. Three different ergonomic computer mouse setups were tested on three different days (horizontal computer mouse without mouse pad; horizontal computer mouse with mouse pad and padded wrist support; vertical computer mouse without mouse pad). The study revealed a significantly strong negative correlation between the temperature of the dorsal surface of the wrist and time spent working with a computer mouse. Hand skin temperature decreased markedly after one hour of continuous computer mouse work. Vertical computer mouse work preserved more stable and higher temperatures of the wrist (>30 °C), while continuous use of a horizontal mouse for more than two hours caused an extremely low temperature (〈28 °C) in distal parts of the hand. The preliminary observational findings indicate the significant effect of the duration and ergonomics of computer mouse work on the development of hand hypothermia.

Description: LDH-C4 is a lactate dehydrogenase that catalyzes the conversion of pyruvate to lactate. In mammals, ldh-c was originally thought to be expressed only in testis and spermatozoa. Plateau pika (Ochotona curzoniae), which belongs to the genus Ochotona of the Ochotonidea family, is a hypoxia tolerant mammal living 3000–5000 m above sea level on the Qinghai-Tibet Plateau, an environment which is strongly hypoxic. Ldh-c is expressed not only in testis and sperm but also in somatic tissues of plateau pika. In this study, the effects of N-propyl oxamate and N-isopropyl oxamate on LDH isozyme kinetics were compared to screens for a selective inhibitor of LDH-C4. To reveal the role and physiological mechanism of LDH-C4 in skeletal muscle of plateau pika, we investigated the effect of N-isopropyl oxamate on the pika exercise tolerance as well as the physiological mechanism. Our results show that Ki of N-propyl oxamate and N-isopropyl oxamate for LDH-A4, LDH-B4, and LDH-C4 were 0.094 mmol/L and 0.462 mmol/L, 0.119 mmol/L and 0.248 mmol/L, and 0.015 mmol/L and 0.013 mmol/L, respectively. N-isopropyl oxamate is a powerful selective inhibitor of plateau pika LDH-C4. In our exercise tolerance experiment, groups treated with inhibitors had significantly lower swimming times than the uninhibited control group. The inhibition rates of LDH, LD, and ATP were 37.12%, 66.27%, and 32.42%, respectively. Our results suggested that ldh-c is expressed in the skeletal muscle of plateau pika, and at least 32.42% of ATP in the skeletal muscle is catalyzed by LDH-C4 by anaerobic glycolysis. This suggests that pika has reduced dependence on oxygen and enhanced adaptation to hypoxic environment due to increased anaerobic glycolysis by LDH-C4 in skeletal muscle. LDH-C4 in plateau pika plays the crucial role in anaerobic glycolysis and generates ATP rapidly since this is the role of LDH-A4 in most species on plain land, which provide evidence that the native humans and animals in Qinghai-Tibet plateau can adapt to the hypoxia environment.

Description: Leukemias and hematopoietic disorders induced by benzene may arise from the toxicity of benzene to hematopoietic stem or progenitor cells (HS/PCs). Since there is a latency period between initial benzene exposure and the development of leukemia, subsequent impact of benzene on HS/PCs are crucial for a deeper understanding of the carcinogenicity and hematotoxicity in post-exposure stage. This study aims to explore the effects of benzene on HS/PCs and gene-expression in Wnt, Notch and Hh signaling pathways in post-exposure stage. The C3H/He mice were injected subcutaneously with benzene (0, 150, 300 mg/kg/day) for three months and were monitored for another 10 months post-exposure. The body weights were monitored, the relative organ weights, blood parameters and bone marrow smears were examined. Frequency of lineage- sca-1+ c-kit+ (LSK) cells, capability of colony forming and expression of genes in Wnt, Notch and Hedghog (Hh) signaling pathways were also analyzed. The colony formation of the progenitor cells for BFU-E, CFU-GEMM and CFU-GM was significantly decreased with increasing benzene exposure relative to controls, while no significant difference was observed in colonies for CFU-G and CFU-M. The mRNA level of cyclin D1 was increased and Notch 1 and p53 were decreased in LSK cells in mice exposed to benzene but with no statistical significance. These results suggest that subsequent toxic effects of benzene on LSK cells and gene expression in Wnt, Notch and Hh signaling pathways persist in post-exposure stage and may play roles in benzene-induced hematotoxicity.

Description: The distribution automation system (DAS) is vulnerable to cyber-attacks due to the widespread use of terminal devices and standard communication protocols. On account of the cost of defense, it is impossible to ensure the security of every device in the DAS. Given this background, a novel quantitative vulnerability assessment model of cyber security for DAS is developed in this paper. In the assessment model, the potential physical consequences of cyber-attacks are analyzed from two levels: terminal device level and control center server level. Then, the attack process is modeled based on game theory and the relationships among different vulnerabilities are analyzed by introducing a vulnerability adjacency matrix. Finally, the application process of the proposed methodology is illustrated through a case study based on bus 2 of the Roy Billinton Test System (RBTS). The results demonstrate the reasonability and effectiveness of the proposed methodology.

Description: We analysed the environmental impacts of three biogas systems based on dairy manure, sorghum and maize. The geographical scope of the analysis is the Po valley, in Italy. The anaerobic digestion of manure guarantees high GHG (Green House Gases) savings thanks to the avoided emissions from the traditional storage and management of raw manure as organic fertiliser. GHG emissions for maize and sorghum-based systems, on the other hand, are similar to those of the Italian electricity mix. In crop-based systems, the plants with open-tank storage of digestate emit 50% more GHG than those with gas-tight tanks. In all the environmental impact categories analysed (acidification, particulate matter emissions, and eutrophication), energy crops based systems have much higher impacts than the Italian electricity mix. Maize-based systems cause higher impacts than sorghum, due to more intensive cultivation. Manure-based pathways have always lower impacts than the energy crops based pathways, however, all biogas systems cause much higher impacts than the current Italian electricity mix. We conclude that manure digestion is the most efficient way to reduce GHG emissions; although there are trade-offs with other local environmental impacts. Biogas production from crops; although not providing environmental benefits per se; may be regarded as an option to facilitate the deployment of manure digestion.