ALBERT

Beschreibung: A deformed exponential family is a generalization of exponential families. Since the useful classes of power law tailed distributions are described by the deformed exponential families, they are important objects in the theory of complex systems. Though the deformed exponential families are defined by deformed exponential functions, these functions do not satisfy the law of exponents in general. The deformed algebras have been introduced based on the deformed exponential functions. In this paper, after summarizing such deformed algebraic structures, it is clarified how deformed algebras work on deformed exponential families. In fact, deformed algebras cause generalization of expectations. The three kinds of expectations for random variables are introduced in this paper, and it is discussed why these generalized expectations are natural from the viewpoint of information geometry. In addition, deformed algebras cause generalization of independences. Whereas it is difficult to check the well-definedness of deformed independence in general, the κ-independence is always well-defined on κ-exponential families. This is one of advantages of κ-exponential families in complex systems. Consequently, we can well generalize the maximum likelihood method for the κ-exponential family from the viewpoint of information geometry.

Beschreibung: We consider the problem of learning a Bayesian network structure given n examples and the prior probability based on maximizing the posterior probability. We propose an algorithm that runs in O(n log n) time and that addresses continuous variables and discrete variables without assuming any class of distribution. We prove that the decision is strongly consistent, i.e., correct with probability one as n ! 1. To date, consistency has only been obtained for discrete variables for this class of problem, and many authors have attempted to prove consistency when continuous variables are present. Furthermore, we prove that the “log n” term that appears in the penalty term of the description length can be replaced by 2(1+ε) log log n to obtain strong consistency, where ε > 0 is arbitrary, which implies that the Hannan–Quinn proposition holds.

Beschreibung: Postdisaster search and rescue is an important application of ultrawideband (UWB) radar systems, which mainly detect trapped victims by their respiratory-motion response. The development of a respiratory-motion detection (RMD) algorithm that can eliminate nonstationary clutter and noise is a challenging task for the application. A new algorithm is proposed to deal with the task in this letter. It uses the multichannel singular spectrum analysis (MSSA) technique to reconstruct the respiratory-motion response detected by a UWB radar. During the reconstruction, the periodicity and range interrelation characteristics of the response are exploited to adaptively identify signal subspaces. The performance of the algorithm is verified both by simulated and real data. The results show its improved performance over the reference algorithms, e.g., a singular-value-decomposition-based algorithm. The adaptive-MSSA-based RMD algorithm has great promise not only in practical use but also for future research of UWB-radar-based human being remote sensing.

Beschreibung: Land–sea contamination observed in Soil Moisture and Ocean Salinity (SMOS) brightness temperature images is found to have two main contributions: the floor error inherent of image reconstruction and a multiplicative error either in the antenna temperature or in the visibility samples measured by the correlator. The origin of this last one is traced down to SMOS calibration parameters to yield a simple correction scheme, which is validated against several geophysical scenarios. Autoconsistency rules in interferometric synthesis together with redundant and complementary calibration procedures provide a robust SMOS calibration scheme.

Beschreibung: This letter proposes a novel algorithm, which is based on the generalized method of moments (GMM), for the estimation and correction of phase errors induced in synthetic aperture radar (SAR) imagery. The GMM algorithm is used to replace the original phase-estimation kernel in the basic structure of the phase-gradient-autofocus algorithm. Since this novel algorithm does not require the observed signal to be a certain distribution model, it is able to estimate arbitrary phase errors. The GMM algorithm has the ability of estimating range-dependent phase errors, which makes it an efficient estimator. As a result, higher accuracy of the estimated phase errors and a better focused image can be achieved. Excellent results have been obtained in autofocusing and imaging experiments on real SAR data.

Beschreibung: Strong clutter reflections of terrain and marine surfaces obscure the contrast between the target-of-interest and clutter (terrain and marine surface reflections) in synthetic aperture radar (SAR) images and consequently hinder the efficiency of image interpretation and analysis. To overcome this problem, this letter proposes an efficient clutter suppression method in SAR images, which is named shedding irrelevant patterns (SIP). The essence is to construct a regression function that can suppress clutter and preserve the target patterns concurrently. We assume that the clutter is irrelevant to the target-of-interest and distinguishable in patterns in terms of image-pixel distribution and intensity (spatial information). Experimental results show the efficiency of the proposed method in both clutter suppression and target pattern preservation.

Beschreibung: A concern in hyperspectral image classification is the high number of required training samples. When traditional classifiers are applied, feature reduction (FR) techniques are the most common approaches to deal with this problem. Subspace-based classifiers, which are developed based on high-dimensional space characteristics, are another way to handle the high dimension of hyperspectral images. In this letter, a novel subspace-based classification approach is proposed and compared with basic and improved subspace-based classifiers. The proposed classifier is also compared with traditional classifiers that are accompanied by an FR technique and the well-known support vector machine classifier. Experimental results prove the efficiency of the proposed method, especially when a limited number of training samples are available. Furthermore, the proposed method has a very high level of automation and simplicity, as it has no parameters to be set.

Beschreibung: To improve the spatial density of measurement points of persistent-scatterer interferometry, distributed scatterer (DS) should be considered and processed. An important procedure in DS interferometry is the phase triangulation (PT). This letter introduces two modified PT algorithms (i.e., equal-weighted PT and coherence-weighted PT) and analyzes the mathematical relations between different published PT methods (i.e., the maximum-likelihood phase estimator, least squares estimator, and eigendecomposition-based phase estimators). The analysis shows that the above five PT methods share very similar mathematical forms with different weight values in the estimation procedure.

Beschreibung: Sparse representation-based classifier and its variants have been widely adopted for hyperspectral image (HSI) classification recently. However, sparse representation is unstable so that similar features might obtain significantly different sparse codes. Despite the instability, we find that the sparse codes follow a class-dependent distribution under the structured dictionary consisting of training samples from all classes. Based on this observation, a novel discriminative feature, sparse code histogram (SCH), is developed for HSI classification. By counting the SCH of each sample from the sparse codes of its spatial neighbors, we can statistically obtain the distribution pattern of sparse codes of the class to which the sample belongs, and then treat the SCH as a new feature for classification. To reduce the possible outliers among the neighbors, a shape-adaptive neighborhood extractor is also employed to enhance the stability of the histogram feature. Experimental results demonstrate that SCH enjoys a strong discriminative power, which can achieve notably better performance than several state-of-the-art methods for HSI classification with limited training samples.

Beschreibung: Several detection statistics have been proposed for detecting fine ground disturbances between two synthetic aperture radar (SAR) images, such as vehicle tracks. The standard method involves estimating a local correlation coefficient between images. Other methods have been proposed using various statistical hypothesis tests. One of these alternative methods is a generalized likelihood ratio test (GLRT), which compares a full-correlation image model to a no-correlation image model. In this letter, we expand the GLRT to polarimetric SAR data and derive the appropriate GLRT detection statistics. Additionally, we explore relaxing the equal variance/equal polarimetric covariance assumptions used in previous results and find improved performance on macroscopic scene changes.

Beschreibung: For downward-looking linear array 3-D synthetic aperture radar, the resolution in cross-track direction is much lower than the ones in range and azimuth. Hence, superresolution reconstruction algorithms are desired. Since the cross-track signal to be reconstructed is sparse in the object domain, compressive sensing algorithm has been used. However, the imaging processing on the 3-D scene brings large computational loads, which renders challenges in both data acquisition and processing. To cover this shortage, truncated singular value decomposition is utilized to reconstruct a reduced-redundancy spatial measurement matrix. The proposed algorithm provides advantages in terms of computational time while maintaining the quality of the scene reconstructions. Moreover, our results on uniform linear array are generally applicable to sparse nonuniform linear array. Superresolution properties and reconstruction accuracies are demonstrated using simulations under the noise and clutter scenarios.

Beschreibung: This letter proposes a signal processing method of passive bistatic radar (PBR) exploiting an uncooperative radar as an illuminator. Compared with other opportunity illuminators, the transmitting signal of a radar usually has a better ambiguity function, which leads to a higher range resolution. Two channels are needed in PBR system. The reference channel is used to estimate radar signal parameters and reconstruct directly propagated signal. The surveillance channel is used to receive scattered wave. An array antenna and a simultaneous multibeam algorithm are necessary in the surveillance channel due to the flexible beam scanning of the uncooperative radar. The procedure of the proposed method is explained in detail, which is then followed by a field experiment. Preliminary results from the field experiment show that the proposed method can be applied to target angle and bistatic range measurement successfully.

Beschreibung: In order to achieve 3-D imaging with an airborne down-looking linear-array synthetic aperture radar (LASAR), a uniform virtual antenna array may be obtained by aperture synthesis of the cross-track sparse multiple-input–multiple-output array. However, the actual 3-D imaging quality is unavoidably degraded by errors in the virtual element position. In this letter, we investigate the effects of these errors on the forms and the degrees of image quality degradation by decomposing the error-related stochastic processes via an orthogonal transform based on discrete Legendre polynomials. It should be noted that these analyses are helpful for designing a LASAR system and providing a reference for specifying the requisite precision of measurement devices and calibration methods. Finally, we briefly consider the use of calibration methods to eliminate the effects of errors.

Beschreibung: In problems where labeled data are scarce, semisupervised learning (SSL) techniques are an attractive framework that can exploit both labeled and unlabeled data. These approaches typically rely on a smoothness assumption such that examples that are similar in input space should also be similar in label space. In many domains, such as remotely sensed hyperspectral image (HSI) classification, the data violate this assumption. In response, we propose a general method by which a neighborhood graph used in SSL is learned using binary classifiers that are trained to predict whether a pair of pixels shares the same label. Working within the framework of semisupervised neural networks (SSNNs), we show that our approach improves on the performance of the SSNN on two HSI data sets.

Beschreibung: In this letter, new models for the spatial correlation of sea clutter texture and intensity are proposed as improved versions of current power law models or exponential decay model. The models for texture have three unknown parameters, and thus can be called triparametric models. The structure of the models is a weighted sum of two components, which can describe the decaying process of the correlation coefficient with spatial lags, as well as the periodic behavior due to the existence of transient coherent structures in sea clutter. Unknown parameters are optimized by the nonlinear least square fit method. Models for sea clutter intensity can be obtained through a linear transform for uncorrelated speckle based on the compound-Gaussian representation of sea clutter. The proposed models are validated and compared with current models using S- and C-band measured sea clutter data. Analysis results indicate the effectiveness of the proposed models in that they can describe the behavior of spatial correlation coefficients with higher accuracy.

Beschreibung: Terrestrial laser scanning (TLS) has become a popular tool for acquiring source data points which can be used to construct digital elevation models (DEMs) for a wide number of applications. A TLS point cloud often has a very fine spatial resolution, which can represent well the spatial variation of a terrain surface. However, the uncertainty in DEMs created from this relatively new type of source data is not well understood, which forms the focus of this letter. TLS survey data representing four terrain surfaces of different characteristics were used to explore the effects of surface complexity and typical TLS data density (in terms of data point spacing) on DEM accuracy. The spatial variation in TLS data can be decomposed into parts corresponding to the signal of spatial variation (of terrain surfaces) and noise due to measurement error. We found a linear relation between the DEM error and the typical TLS data spacings considered (30–100 mm) which arises as a function of the interpolation error, and a constant contribution from the propagated data noise. This letter quantifies these components for each of the four surfaces considered and shows that, for the interpolation method considered here, higher density sampling would not be beneficial.

Beschreibung: A novel way to estimate the live fuel moisture content (LFMC) was explored from the ratio of canopy water content (CWC) and foliage dry biomass (FDB). The CWC was estimated using the PROSAIL (PROSPECT + SAIL) radiative transfer model from the Landsat 8 product. A weak constraint 4-D variational data assimilation method was employed to assimilate the temporally estimated leaf area index into a soil-water-atmosphere-plant (SWAP) model for optimizing the model control variables. Then, the SWAP model was reinitialized with this optimum set of control variables, and better prediction of FDB was obtained. Results showed that a high accuracy level was achieved for the estimated CWC ( $R^{2}=0.91$ , $mbox{RMSE}=84.74 mbox{g/m}^2$ ) and FDB ( $R^2=0.88$ , $mbox{RMSE}=48.54 mbox{g/m} ^2$ ) when compared with in situ measured values. However, the accuracy level of estimated LFMC was poor ( $R^2=0.59$ , $mbox{RMSE} =30.85%$ ) . Further analyses find that the estimated LFMC is reliable for low LFMC but challenged for high LFMC, which indicates that the presented method still makes sense to the assessment of wildfire risk since the wildfire generally occurs when the vegetation is in low LFMC condition.

Beschreibung: In this letter, we present the use of experimental human micro-Doppler signature data gathered by a multistatic radar system to discriminate between unarmed and potentially armed personnel walking along different trajectories. Different ways of extracting suitable features from the spectrograms of the micro-Doppler signatures are discussed, particularly empirical features such as Doppler bandwidth, periodicity, and others, and features extracted from singular value decomposition (SVD) vectors. High classification accuracy of armed versus unarmed personnel (between 90% and 97% depending on the walking trajectory of the people) can be achieved with a single SVD-based feature, in comparison with using four empirical features. The impact on classification performance of different aspect angles and the benefit of combining multistatic information is also evaluated in this letter.

Beschreibung: Automatic urban area detection in remote sensing images is an important application in the field of earth observation. Most of the existing methods employ feature classifiers and thereby contain a data training process. Moreover, some methods cannot detect urban areas in complex scenes accurately. This letter proposes an automatic urban area detection method that uses multiple features that have different resolutions. First, a downsampled low-resolution image is used to segment the candidate area. After the corner points of the urban area are extracted, a weighted Gaussian voting matrix technique is employed to integrate the corner points into the candidate area. Then, the edge features and homogeneous region are extracted by using the original high-resolution image. Using these results as the input, the processes of guided filtering and contrast enhancement can finally detect accurately the urban areas. This method combines multiple features, such as corner, edge, and regional characteristics, to detect the urban areas. The experimental results show that the proposed method has better detection accuracy for urban areas than the existing algorithms.

Beschreibung: In marine sciences, time series are often nonlinear and nonstationary. Adequate and specific methods are needed to analyze such series. In this letter, an application of the empirical mode decomposition method (EMD) associated to the Hilbert spectral analysis (HSA) is presented. Furthermore, EMD-based time-dependent intrinsic correlation (TDIC) analysis is applied to consider the correlation between two nonstationary time series. Four temperature time series obtained from automatic measurements in nearshore waters of the Réunion island are considered, recorded every 10 min from July 2011 to January 2012. The application of the EMD on these series and the estimation of their power spectra using the HSA are illustrated. The authors identify low-frequency tidal waves and display the pattern of correlations at different scales and different locations. By TDIC analysis, it was concluded that the high-frequency modes have small correlation, whereas the trends are perfectly correlated.

Beschreibung: Detecting vehicles in aerial images provides important information for traffic management and urban planning. Detecting the cars in the images is challenging due to the relatively small size of the target objects and the complex background in man-made areas. It is particularly challenging if the goal is near-real-time detection, i.e., within few seconds, on large images without any additional information, e.g., road database and accurate target size. We present a method that can detect the vehicles on a 21-MPixel original frame image without accurate scale information within seconds on a laptop single threaded. In addition to the bounding box of the vehicles, we extract also orientation and type (car/truck) information. First, we apply a fast binary detector using integral channel features in a soft-cascade structure. In the next step, we apply a multiclass classifier on the output of the binary detector, which gives the orientation and type of the vehicles. We evaluate our method on a challenging data set of original aerial images over Munich and a data set captured from an unmanned aerial vehicle (UAV).

Beschreibung: We compare five slope correction methods developed by Walter et al. , Montes et al. , Schleppi et al. , España et al. , and Gonsamo et al. (referred to as WAL, MON, SCH, ESP, and GON, respectively) using artificial fisheye pictures simulated by graphics software and a lookup table (LUT) retrieval method. The LUT is built by simulating the directional gap fraction as a function of leaf area index (LAI) and average leaf inclination angle (ALIA) using the Poisson law. LAI and ALIA estimates correspond to the case of the LUT that provides the lowest root-mean-square error between the observed gap fractions after slope correction and the simulated ones. Three LAI values (1.5, 3.5, and 5.5), four ALIA values (26.8°, 45°, 57.5°, and 63.2°), and three slope angles (0°, 20°, and 50°) constituted 36 samples of random scenes. ESP is recommended because its results are accurate and independent on the leaf angle distribution (LAD), while GON only performs well for spherical LAD. The three other methods present less good performances with underestimation or overestimation of LAI and/or ALIA depending on the LAD, and the recommended order for them is MON, SCH, and WAL.

Beschreibung: In this letter, an improved phase correlation (PC) method based on 2-D plane fitting and the maximum kernel density estimator (MKDE) is proposed, which combines the idea of Stone's method and robust estimator MKDE. The proposed PC method first utilizes a vector filter to minimize the noise errors of the phase angle matrix and then unwraps the filtered phase angle matrix by the use of the minimum cost network flow unwrapping algorithm. Afterward, the unwrapped phase angle matrix is robustly fitted via MKDE, and the slope coefficients of the 2-D plane indicate the subpixel shifts between images. The experiments revealed that the improved method can effectively avoid the impact of outliers on the phase angle matrix during the plane fitting and is robust to aliasing and noise. The matching accuracy can reach 1/50th of a pixel using simulated data. The real image sequence tracking experiment was also undertaken to demonstrate the effectiveness of the proposed PC method with a registration accuracy of root-mean-square error better than 0.1 pixels.

Beschreibung: Accurately mapping forest carbon density by combining sample plots and remotely sensed images has become popular because this method provides spatially explicit estimates. However, mixed pixels often impede the improvement of the estimation. In this letter, regression modeling and spectral unmixing analysis were integrated to improve the estimation of forest carbon density for the You County of Hunan, China, using Landsat Thematic Mapper images. Linear spectral unmixing with and without a constraint (LSUWC and LSUWOC) and nonlinear spectral unmixing (NSU) were compared to derive the fractions of five endmembers, particularly forests. Stepwise regression, logistic regression, and polynomial regression (PR) with and without the forest fraction used as an independent variable and the product of the forest fraction image and the map from the best model without the forest fraction were compared. The models were developed using 56 sample plots, and their results were validated using 26 test plots. The decomposition of mixed pixels was assessed using higher spatial resolution SPOT images and a corresponding land cover map. The results showed that 1) LSUWC more accurately estimated the endmember fractions than LSUWOC and NSU, 2) PR had the greatest estimation accuracy of forest carbon, and 3) combining regression modeling and spectral unmixing increased the estimation accuracy by 31%–39%, and introducing the forest fraction into the regressions performed better than the product of forest fraction image and the results from PR without the fraction. This implied that the integrations provided great potential in reducing the impacts of mixed pixels in mapping forest carbon.

Beschreibung: This letter proposes a multiresolution technique to address the high computational cost in remote sensing image registration. The scale-invariant feature transform is applied to detect keypoints and descriptors, and then, global information combined with descriptors is utilized to establish keypoint mappings. Keypoints are first classified according to their octaves. Then, in the lowest resolution, the keypoints of the largest octave are mapped with descriptors and the global information, giving an initial affine transformation $T_0$ . In the next octave, the keypoints of the second largest octave are mapped by employing $T_0$ to narrow the space of matching keypoints. By this means, the process of establishing keypoint correspondences is conducted from one resolution (octave) to the next as the obtained transformation gets finer until we get to the highest resolution. Due to the high computational expense of computing global information, the proposed technique is important for aligning large-size remote sensing imagery. Experimental results show that the proposed method can achieve a comparable registration accuracy but with a less computational cost than directly building keypoint mappings on images of large size.

Beschreibung: Gold nanorods (GNRs) with surface plasmon resonance peak at 1063.8 nm were fabricated and experimentally exploited as the single and combined saturable absorber (SA) in a $Q$ -switched Nd:YAG laser for the first time. In the situation using GNRs as a single SA, the maximum pulse energy of 19 $muhbox{J} $ was achieved at a pulse repetition rate of 20 kHz. However, due to the small effective modulation depth of the GNRs, microsecond pulses were generated in such a GNRs-based passively $Q$ -switched laser. A novel configuration using GNRs as a combined SA in an acoustooptic $Q$ -switched Nd:YAG laser was proposed. The small nonlinear loss modulation induced by the GNRs played a distinctive role in flexibly manipulating the nanosecond pulse waveforms. Our study demonstrated the feasibility of generating high-energy pulses by singly using GNRs-based SA in all solid-state lasers. Meanwhile, a new application mode incorporating GNRs as a combined SA was studied, providing an alternative method to take advantage of the nanomaterial-based SA with a relatively small modulation depth.

Beschreibung: Presents corrections to the paper, "Estimation of forest biomass from two-level model inversion of single-pass InSAR data" (Soja, M.J., et al.,Trans. Geosci. Remote Sens., vol. 53, no. 9, pp. 5083???5099, Sep. 2015).

Beschreibung: In this letter, we present an efficient parallel implementation of composite kernels in support vector machines (SVMs) for hyperspectral image (HSI) classification. Our implementation makes effective use of commodity graphics processing units (GPUs). Specifically, we port the calculation of composite kernels to GPUs, perform intensive computations based on NVidia's compute unified device architecture, and execute the rest of the operations related with control and small data calculations in the CPU. Our experimental results, conducted using real hyperspectral data sets and NVidia GPU platforms, indicate significant improvements in terms of computational effectiveness, achieving near-real-time performance of spatial–spectral HSI classification for the first time in the literature.

Beschreibung: Compared with airborne laser scanning, terrestrial laser scanning (TLS) offers ground-based point cloud data of trees and provides greater potential to accurately estimate tree and stand parameters. However, there is a lack of effective methods to accurately identify locations of individual trees from TLS point cloud data. It is also unknown whether the estimation accuracy of the parameters, including tree height (H), diameter at breast height (DBH), and so on, using TLS can meet the requirement of forest management and planning. In this letter, a novel method to effectively process point cloud data and further determine the locations of individual trees in a stand based on the central coordinates of point cloud data on a defined grid according to the largest DBH was developed. Moreover, a point-cloud-data-based convex hull algorithm and the cylinder method were, respectively, used to estimate DBH and H of individual trees. This study was conducted in a pure Chinese fir plantation of 45 trees located in Huang-Feng-Qiao forest farm, You County of Hunan, China. The comparison of the estimated and observed values showed that the obtained tree locations had errors of less than 20 cm, and the relative root mean square errors for the estimates of both DBH and H were less than 5%. This implies that TLS is very promising for the retrieval of tree and stand parameters in forest stands. For the applications of these methods to mixed forests with a structure of multilayer canopies, further examination is needed.

Beschreibung: Commercial, industrial, and military aerospace designs are increasingly deploying MEMS micro inertial measurement unit (MIMU) for motion control, automation, and positioning applications, such as the unmanned aerial vehicle (UAV), robot, and smart phone. On the one hand, MIMU has the merit of low cost, small size, low-power consumption, and high shock resistance, but on the other hand, low-cost MIMU is affected by systematic error caused by the instability of the drift, scaling factors, and axes misalignment, which may lead to large errors in the position and attitude’s determination from time to time. That means calibration before use is an effective way to improve the practical precision of MIMU. However, many customers have no precise turntable to calibrate the MIMU before they use it. To address these problems, this paper presents an easy self-calibration method to implement calibration of the MIMU on a common table only with an inclined surface, no precise turntable is needed. The calibration method is based on the following principles. First, the module of the output vector of the orthogonal configured three-axis accelerometers is equal to unit gravity. Second, when IMU rotates to a known gesture with a stable axis, the angles can be calculated through integration. Third, when the accelerometers’ parameters are calculated, it can act as a level datum. Furthermore, the accelerometers on the inclined surface are used to determine the rotating heading datum. Finally, after a series static positions test and rotating test, the parameters can be extracted and estimated. To demonstrate the success and the convenience of the proposed method, comparison experiments with the precision turntable have been made on an ADI’s MIMU. The calibration results show that the accuracy and precision of this method is quite equivalent with the turntable-based calibration, and the scale factors error with an order of magnitude always equal or less than $10^{-5}$ . The observed static and dynamic yaw maximum angular error in a certain period is <0.8°, the pitch maximum angular error is <0.5°, and the roll maximum angular error is <0.3°.

Beschreibung: Time–frequency packing (TFP) transmission provides the highest achievable spectral efficiency with a constrained symbol alphabet and detector complexity. In this paper, the application of the TFP technique to fiber-optic systems is investigated and experimentally demonstrated. The main theoretical aspects, design guidelines, and implementation issues are discussed, focusing on those aspects which are peculiar to TFP systems. In particular, adaptive compensation of propagation impairments, matched filtering, and maximum a posteriori probability detection are obtained by a combination of a two-dimensional equalizer and four eight-state parallel Bahl–Cocke–Jelinek–Raviv (BCJR) detectors. A novel algorithm that ensures adaptive equalization, channel estimation, and a proper distribution of tasks between the equalizer and BCJR detectors is proposed. A set of irregular low-density parity-check codes with different rates is designed to operate at low error rates and approach the spectral efficiency limit achievable by TFP at different signal-to-noise ratios. An experimental demonstration of the designed system is finally provided with five dual-polarization QPSK-modulated optical carriers, densely packed in a 100-GHz bandwidth, employing a recirculating loop to test the performance of the system at different transmission distances.

Beschreibung: We investigated nonlinear optical characteristics of Tungsten disulfide (WS 2 ) films and experimentally demonstrated their high potential for application as nonlinear saturable absorbers in passively mode-locked fiber lasers. Side polished fiber (SPF) was fabricated and WS 2 film was overlaid to provide an efficient evanescent field interaction. The WS 2 film was prepared using two methods: liquid phase exfoliation to form few-layer nano-sheets, and chemical vapor deposition (CVD) to grow uniform multilayer WS 2 on a SiO 2 substrate. Two SPF saturable absorbers were prepared by either spin coating WS 2 solution or lifting off the multilayer CVD WS 2 on SPF. An all-fiber ring cavity was built and the WS 2 film overlaid on SPF was employed as a mode locker along with Er-doped fiber as a gain medium. Using the spin-coated WS 2 SPF, stable soliton-like pulses were generated with a spectral width of 5.6 nm and 467 fs pulse duration. The fiber laser cavity containing CVD WS2 SPF generated a transform-limited soliton pulse train with a spectral width of 8.23 nm and a pulse duration of 332 fs. Our study confirmed a high potential of WS 2 film as a novel 2-D nonlinear optical material for laser applications.

Beschreibung: We propose and experimentally demonstrate an on-chip all-optical differential-equation solver capable of solving second-order ordinary differential equations (ODEs) characterizing continuous-time linear time-invariant systems. The photonic device is implemented by a self-coupled microresonator on a silicon-on-insulator platform with mutual coupling between the cavity modes. Owing to the mutual mode coupling within the same resonant cavity, the resonance wavelengths induced by different cavity modes are self-aligned, thus avoiding precise wavelength alignment and unequal thermal wavelength drifts as in the case of cascaded resonators. By changing the mutual mode coupling strength, the proposed device can be used to solve second-order ODEs with tunable coefficients. System demonstration using the fabricated device is carried out for 10-Gb/s optical Gaussian and super-Gaussian input pulses. The experimental results are in good agreement with theoretical predictions of the solutions, which verify the feasibility of the fabricated device as a tunable second-order photonic ODE solver.

Beschreibung: We demonstrate a 100 Gb/s short reach system using a multicarrier transmitter based on a gain switched monolithically integrated laser. An optical comb source with 12.5-GHz free spectral range is achieved by gain-switching an integrated passive feedback laser. The 100 Gb/s wavelength division multiplexed, single sideband, direct detection, orthogonal frequency division multiplexed (WDM-SSB-DD-OFDM) system operates over 25 km standard single mode fiber exhibiting a spectral efficiency of 1.8 b/s/Hz. Receiver sensitivity of –14.2 dBm is achieved after 25 km transmission. Performance optimization with phase and amplitude precompensation is employed to improve the SSB OFDM modulation thereby reducing the interchannel interference and overcoming the power fading induced by the optical filter. We also present a theoretical analysis of the SSB-OFDM modulation.

Beschreibung: In this paper, narrow-band emission lines are generated by means of two random distributed feedback fiber laser schemes. Spectral line-widths as narrow as 3.2 pm have been measured, which significantly improves previous reported results. The laser is analyzed with the aim of obtaining a spectral line-width as narrow as possible. Additionally a variation of this setup for multi-wavelength operation is also validated. Both schemes present a simple topology that use a combination of phase-shifted fiber Bragg gratings and regular fiber Bragg gratings as filtering elements.

Beschreibung: We report on the fabrication and characterization of 19-cell hypocycloid-shape Kagome fibers with core size larger than 100 μm. These inhibited coupling fibers present low propagation loss (100 dB/km) over broad transmission range with low chromatic dispersion combined with ultra-low power overlap with silica surround, making them an efficient solution for ultra-high power laser handling, ultra-fast laser delivery, and plasma photonics applications.

Beschreibung: The iterative demodulation and decoding algorithm introduced in 2005 by Colavolpe, Barbieri, and Caire to cope with channels affected by phase noise needs pilot symbols to bootstrap. However, pilot symbols reduce the spectral efficiency of the system and, consequently, system's throughput. The aim of this paper is to show that trellis-based demodulation can be used to bootstrap the iterative process without the need of pilot symbols. Also, the complexity issue of trellis-based demodulation is addressed in this paper. The result is that the performance of iterative demodulation and decoding after the iterations is virtually unaffected by complexity reduction, provided that the reduced-complexity demodulator guarantees cycle-slip-free operation. From the numerical results presented in this paper, we show that cycle-slip-free operation can be achieved with substantial complexity reduction also for phase noise associated with linewidths of practical interest.

Beschreibung: The optical pulse evolution in a highly nonlinear normal dispersion-increasing fiber has been considered, both experimentally and theoretically. It was found that large spectral broadening in tapered waveguides could occur without temporal instabilities and impose the linear frequency modulation, i.e., chirp, required for high-quality pulse compression. The pedestal-free pulses have been demonstrated after dechirping in a standard single-mode fiber.

Beschreibung: This work proposes a novel localized surface plasmon resonance (LSPR) biochemical sensor featuring high sensitivity and a high resolution. The sensor was divided into two subcomponents according to their distinct functions; namely, single-mode fiber and metal array. Single-mode fibers located on the left and right sides of the sensors function as the input and output for optical fiber signals. A metal array comprising an arrangement of cylindrical nanometal particles served as the detection area of the sensor. To effectively reduce the memory capacity and calculation time, two innovative techniques (i.e., object meshing and boundary meshing) were integrated with the finite element method. With the area of the triangular elements used as a basis, the object boundary, small object, medium object, and large objects were meshed at a ratio of 1:8:160:1600. The improved numerical simulation methods and six design procedures were adopted to develop and analyze the proposed LSPR biochemical sensor. The results show that the novel LSPR biochemical sensor outperformed two current high-performance biochemical sensors and provided additional advantages such as short length (approximately 430 μm), high resolution (approximately –120 dB), and high sensitivity (approximately 127 604 nm/RIU).

Beschreibung: We propose an ultra-broadband super light absorber by integrating different-sized tapered hyperbolic metamaterial (HMM) waveguides, each of which has a different and wide absorption band due to broadband slow-light response, into a unit cell. We numerically demonstrate that such an absorber is superior to a single-sized HMM absorber in terms of absorption bandwidth, while maintaining a comparable absorption efficiency. A three different-sized HMM absorber presents the capability of working with an ultra-wide frequency band ranging from 1 to 30 THz, which is much larger than previously proposed absorbers working in the same spectral region. Such a design shows great promise for a broad range of applications such as thermal emitters, photovoltaics, optical-chemical energy harvesting, and stealth technology, where ultra-wideband absorption is in very high demand.

Beschreibung: This paper proposes a ring-based integrated wireless optical network architecture and an associated protocol that involves Ethernet passive optical network (EPON) and long term evolution (LTE) wireless network. The architecture along with the proposed protocol is instrumental toward the reduction of handover delay. The proposed ring-based EPON architecture facilitates the implementation of the X2 interface for LTE network by enabling the optical network units of the EPON backhaul to directly communicate with each other. The work further discusses about an open access network architecture where a single EPON can be used by multiple mobile service providers without compromising information security. Extensive simulations have been carried out to evaluate the performance of the proposed network. An analytical model has been introduced to calculate the queuing delay experienced by the X2 interface. The model has been validated with the simulations results.

Beschreibung: High spectrum efficiency and fast restoration speed are highly desired for survivable elastic optical networks (EONs). In this paper, we take the advantages of failure-independent path-protecting preconfigured cycles (FIPP p -cycles) and investigate how to realize spectrum efficient resilience design with them. We first study the problem of offline service provisioning with FIPP p -cycles. We formulate an integer linear programming model and prove that the problem is $mathcal{NP}$ hard. Then, several time-efficient heuristics are designed for FIPP p -cycle formulation and related routing, modulation format, and spectrum assignment. Extensive simulations on offline provisioning verify that the heuristics can obtain near-optimal solutions. Next, we consider online service provisioning with FIPP p -cycles in dynamic EONs. In order to overcome the decrease of protection efficiency during dynamic network operation, we propose a p -cycle reconfiguration scheme to reoptimize protection structures on-the-fly. Simulation results demonstrate that the proposed algorithms can improve spectrum efficiency and reduce bandwidth blocking probability simultaneously.

Beschreibung: Photo-thermo-refractive (PTR) glasses are the class of polyfunctional materials that combine the properties of several monofunctional materials such as photo-refractive, laser, luminescent, and plasmonic ones. Based on PTR glasses, various diffractive holographic elements and photonic devices were developed in both the volume and fiber versions. In this paper, the fabrication of optical planar waveguides on PTR glass by low-temperature ion exchange is reported for the first time. Planar waveguides were fabricated through substituting the sodium ions in glass by silver, potassium, rubidium, and cesium ones from the nitrate melts. The silver waveguides were shown to have the largest depth (27 μm) and reveal no birefringence. For the silver waveguides, an increase in the refractive index is caused by differences in the polarizabilities of cations exchanged. The maximum increment of the refractive index was observed in the cesium waveguides (0.0512). An increase in the refractive index and also appearing the birefringence in potassium, rubidium, and cesium waveguides are found to be due to the compressive mechanical stresses and their relaxation. The potentialities of the ion exchange technology for fabricating, in PTR glasses, planar gradient waveguides with low losses (0.5 dB/cm) are demonstrated, the potentialities extending the application field of PTR glasses in photonics.

Beschreibung: Background: In 2012, a pilot health policy of contractual service relations between general practitioners and patients was implemented in China. Due to the decline in body and cognitive function, as well as the lack of family care and narrow social support networks, the demand of health services among the elderly is much higher than that among the general population. This study aims to probe into the empty nesters’ willingness-to-pay for general practitioners using a contractual service policy, investigating empty nesters’ payment levels for the service, and analyze the main factors affecting the willingness of empty-nesters’ general practitioners using contractual service supply cost. Methods: This cross-sectional study adopted a multistage stratified sampling method to survey 865, city empty nesters (six communities in three districts of one city) aged 60–85 years. A condition value method was used to infer the distribution of the willingness-to-pay; Cox’s proportional hazards regression model was used to analyze the influencing factors of willingness-to-pay. Results: More than seventy percent (76.6%) of the empty nesters in this city were willing to pay general practitioners using contract service in Chongqing. The level of willingness-to-pay for the surveyed empty nesters was 34.1 yuan per year. The median value was 22.1 yuan per year, which was below the Chongqing urban and rural cooperative medical insurance individual funding level (60 yuan per year) in 2013. Cox’s proportional hazards regression model analysis showed that the higher the education level was, the worse the self-reported health status would be, accompanied by higher family per capita income, higher satisfaction of community health service, and higher willingness-to-pay empty nesters using a contract service. Women had a higher willingness-to-pay than men. Conclusions: The willingness-to-pay for general practitioners by contractual service is high among city empty nesters in Chongqing, thus, individual financing is feasible. However, people are willing to pay less than half of the current personal financing of cooperative medical insurance of urban and rural residents. Education level, family per capita income, and self-reported health status are the main factors affecting the cost sharing intention for general practitioners using contract service supply. According to the existing situation of different empty nesters, it is important to perfect the design of general practitioners using a contractual service policy system, according to differentiated personal financing levels.

Beschreibung: Lightweighting in the transportation industry is today recognized as one of the most important strategies to improve fuel efficiency and reduce anthropogenic climate-changing, environment-damaging, and human death-causing emissions. However, the structural applications of lightweight alloys are often limited by some inherent deficiencies such as low stiffness, high wear rate and inferior strength. These properties could be effectively enhanced by the addition of stronger and stiffer reinforcements, especially nano-sized particles, into metal matrix to form composites. In most cases three common strengthening mechanisms (load-bearing effect, mismatch of coefficients of thermal expansion, and Orowan strengthening) have been considered to predict the yield strength of metal matrix nanocomposites (MMNCs). This study was aimed at developing a unified model by taking into account the matrix grain size and porosity (which is unavoidable in the materials processing such as casting and powder metallurgy) in the prediction of the yield strength of MMNCs. The Zener pinning effect of grain boundaries by the nano-sized particles has also been integrated. The model was validated using the experimental data of magnesium- and titanium-based nanocomposites containing different types of nano-sized particles (namely, Al2O3, Y2O3, and carbon nanotubes). The predicted results were observed to be in good agreement with the experimental data reported in the literature.

Beschreibung: In order to achieve process intensification for adsorption chillers and heat pumps, a new composite material was developed based on sintered aluminum fibers from a melt-extraction process and a dense layer of silico-aluminophosphate (SAPO-34) on the fiber surfaces. The SAPO-34 layer was obtained through a partial support transformation (PST) process. Preparation of a composite sample is described and its characteristic pore size distribution and heat conductivity are presented. Water adsorption data obtained under conditions of a large pressure jump are given. In the next step, preparation of the composite was scaled up to larger samples which were fixed on a small adsorption heat exchanger. Adsorption measurements on this heat exchanger element that confirm the achieved process intensification are presented. The specific cooling power for the adsorption step per volume of composite is found to exceed 500 kW/m3 under specified conditions.

Beschreibung: In this letter, a novel algorithm for attitude measurement based on a 3-D electromagnetic model (3-D em-model) is proposed. The 3-D em-model is established offline based on the geometric structure of the target, and it can be used to predict the scattering features at different target attitudes. In order to measure the attitude of the air target, we design a bistatic step frequency radar system. The directions of the two radars' lines of sight (LOSs) relative to the target are acquired by matching the high-resolution range profiles (HRRPs) from the target echoes to the HRRPs generated from the 3-D em-model. Since the directions of two radars' LOSs relative to the Earth are already known, the absolute attitude of the target can be acquired. The innovative contributions of this letter are as follows: 1) A comprehensive theoretical analysis of air target attitude measurement based on its own 3-D em-model is proposed; 2) the method can be applied to different kinds of air targets such as aircraft, satellite, missile, etc.; 3) the proposed attitude measurement method does not require target motion model in advance; and 4) the proposed algorithm can be applied to any kind of step frequency waveforms. Experiments using both data predicted by a high-frequency electromagnetic code and data measured in the chamber verify the validity of the method.

Beschreibung: The Soil Moisture and Ocean Salinity (SMOS) and Soil Moisture Active Passive (SMAP) missions provide Level-1 brightness temperature (Tb) observations that are used for global soil moisture estimation. However, the nature of these Tb data differs: the SMOS Tb observations contain atmospheric and select reflected extraterrestrial (“Sky”) radiation, whereas the SMAP Tb data are corrected for these contributions, using auxiliary near-surface information. Furthermore, the SMOS Tb observations are multiangular, whereas the SMAP Tb is measured at 40° incidence angle only. This letter discusses how SMOS Tb, SMAP Tb, and radiative transfer modeling components can be aligned in order to enable a seamless exchange of SMOS and SMAP Tb data in soil moisture retrieval and assimilation systems. The aggregated contribution of the atmospheric and reflected Sky radiation is, on average, about 1 K for horizontally polarized Tb and 0.5 K for vertically polarized Tb at 40° incidence angle, but local and short-term values regularly exceed 5 K.

Beschreibung: An ultrasonic technique, invariant to temperature changes, for a density measurement of different liquids under in situ extreme conditions is presented. The influence of geometry and material parameters of the measurement system (transducer, waveguide, matching layer) on measurement accuracy and reliability is analyzed theoretically along with experimental results. The proposed method is based on measurement of the amplitude of the ultrasonic wave, reflected from the interface of the solid/liquid medium under investigation. In order to enhance sensitivity, the use of a quarter wavelength acoustic matching layer is proposed. Therefore, the sensitivity of the measurement system increases significantly. Density measurements quite often must be performed in extreme conditions at high temperature (up to 220 °C) and high pressure. In this case, metal waveguides between piezoelectric transducer and the measured liquid are used in order to protect the conventional transducer from the influence of high temperature and to avoid depolarization. The presented ultrasonic density measurement technique is suitable for density measurement in different materials, including liquids and polymer melts in extreme conditions. A new calibration algorithm was proposed. The metrological evaluation of the measurement method was performed. The expanded measurement uncertainty Uρ = 7.4 × 10−3 g/cm3 (1%).

Beschreibung: The relationship between soil fauna and different fertilizer management practices is of growing concern. The aim of this research was to investigate the response of soil fauna to fertilization regimes, to explore the relationships among the community of soil animals, soil moisture and crop yields. The application of organic fertilizers (i.e., sheep manure or crop residues) increased crop yields and promoted the number of individuals and species of soil fauna owing to the exogenous organic matter that fertilizers provided for the survival and development of soil fauna. Furthermore, the treatments that applied sheep manure (i.e., sheep manure only or nitrogen, phosphorus, potassium and sheep manure plus) were significantly beneficial for increasing crop yields and diversity of soil fauna compared to treatments with crop residues returned (i.e., crop residues returned only or nitrogen, phosphorus, potassium and crop residues returned to the field) (p 〈 0.05) due to the response of soil fauna to diverse exogenous nutrients and the effect of soil fertility. Therefore, the finding that soil fauna abundance is significantly positively correlated with soil moisture and crop yield may mean the effects of fertilizer applications on soil animals were partly masked by the soil moisture and crop yield.

Beschreibung: A multi-sensor addressing method for fiber Bragg grating aided fiber loop ringdown (FBG-FLRD) sensor array is proposed. It is capable of simultaneous measurement of temperature and force. Light from a wavelength-swept fiber laser (WSFL) is modulated into pulsed light to illuminate FBG-FLRD sensor array. Based on the time sequence of pulsed lights reflected by fiber Bragg grating array, each FBG-FLRD sensor can be distinguished. The time interval between the trigger signal of the WSFL and the pulsed light reflected by FBG offers temperature variation information. By measuring the ringdown time of each FBG-FLRD, the loss of fiber ring induced by temperature and force can be obtained. And then simultaneous measurement can be implemented in real time. To prove the validity of the proposed system, a six elements array is experimentally validated with interrogation frequency of 27.5 Hz.

Beschreibung: Urban areas are one of the most important components of human society. Their extents have been continuously growing during the last few decades. Accurate and timely measurements of the extents of urban areas can help in analyzing population densities and urban sprawls and in studying environmental issues related to urbanization. Urban extents detected from remotely sensed data are usually a by-product of land use classification results, and their interpretation requires a full understanding of land cover types. In this study, for the first time, we mapped urban extents in the continental United States using a novel one-class classification method, i.e., positive and unlabeled learning (PUL), with multi-temporal Moderate Resolution Imaging Spectroradiometer (MODIS) data for the year 2010. The Defense Meteorological Satellite Program Operational Linescan System (DMSP-OLS) night stable light data were used to calibrate the urban extents obtained from the one-class classification scheme. Our results demonstrated the effectiveness of the use of the PUL algorithm in mapping large-scale urban areas from coarse remote-sensing images, for the first time. The total accuracy of mapped urban areas was 92.9% and the kappa coefficient was 0.85. The use of DMSP-OLS night stable light data can significantly reduce false detection rates from bare land and cropland far from cities. Compared with traditional supervised classification methods, the one-class classification scheme can greatly reduce the effort involved in collecting training datasets, without losing predictive accuracy.

Beschreibung: The knowledge about impacts of changes in precipitation regimes on terrestrial ecosystems is fundamental to improve our understanding of global environment change, particularly in the context that heavy precipitation is expected to increase according to the 5th Intergovernmental Panel on Climate Change (IPCC) assessment. Based on observed climate data and the Advanced Very High Resolution Radiometer (AVHRR) Global Inventory Modeling and Mapping Studies (GIMMS) satellite-derived normalized difference vegetation index (NDVI), here we analyzed the spatio-temporal changes in grassland NDVI, covering 1.64 × 106 km2, in northern China and their linkages to changes in precipitation and temperature during the period 1982–2011. We found that mean growing season (April–October) grass NDVI is more sensitive to heavy precipitation than to moderate or light precipitation in both relatively arid areas (RAA) and relatively humid areas (RHA), whereas the sensitivities of grass NDVI to temperature are comparable to total precipitation in RHA. Heavy precipitation showed the strongest impacts in more than half of northern China (56%), whereas impacts of light precipitation on grass NDVI were stronger in some areas (21%), mainly distributed in northwestern China, a typical arid and semi-arid area. Our findings suggest that responses of grasslands are divergent with respect to changes in precipitation intensities.

Beschreibung: The worldwide Sensor Web comprises observation data from diverse sources. Each data provider may process and assess datasets differently before making them available online. This information is often invisible to end users. Therefore, publishing observation data with quality descriptions is vital as it helps users to assess the suitability of data for their applications. It is also important to capture contextual information concerning data quality such as provenance to trace back incorrect data to its origins. In the Open Geospatial Consortium (OGC)’s Sensor Web Enablement (SWE) framework, there is no sufficiently and practically applicable approach how these aspects can be systematically represented and made accessible. This paper presents Q-SOS—an extension of the OGC’s Sensor Observation Service (SOS) that supports retrieval of observation data together with quality descriptions. These descriptions are represented in an observation data model covering various aspects of data quality assessment. The service and the data model have been developed based on open standards and open source tools, and are productively being used to share observation data from the TERENO observatory infrastructure. We discuss the advantages of deploying the presented solutions from data provider and consumer viewpoints. Enhancements applied to the related open-source developments are also introduced.

Beschreibung: In recent years, IoT (Internet of Things) technologies have seen great advances, particularly, the IPv6 Routing Protocol for Low-power and Lossy Networks (RPL), which provides a powerful and flexible routing framework that can be applied in a variety of application scenarios. In this context, as an important role of IoT, Wireless Sensor Networks (WSNs) can utilize RPL to design efficient routing protocols for a specific application to increase the ubiquity of networks with resource-constrained WSN nodes that are low-cost and easy to deploy. In this article, our work starts with the description of Agricultural Low-power and Lossy Networks (A-LLNs) complying with the LLN framework, and to clarify the requirements of this application-oriented routing solution. After a brief review of existing optimization techniques for RPL, our contribution is dedicated to a Scalable Context-Aware Objective Function (SCAOF) that can adapt RPL to the environmental monitoring of A-LLNs, through combining energy-aware, reliability-aware, robustness-aware and resource-aware contexts according to the composite routing metrics approach. The correct behavior of this enhanced RPL version (RPAL) was verified by performance evaluations on both simulation and field tests. The obtained experimental results confirm that SCAOF can deliver the desired advantages on network lifetime extension, and high reliability and efficiency in different simulation scenarios and hardware testbeds.

Beschreibung: The aim of this randomized clinical trial was to evaluate whether a recently described multi-sensor approach called BIONOTE® is accurate enough to verify the efficacy of treatment of patients with halitosis. A treatment with Lactobacillus brevis (CD2)–containing lozenges, compared with placebo was tested. The BIONOTE® was compared with traditional techniques used to detect halitosis: OralChroma™ and two calibrated odor judges enrolled for the organoleptic assessments. Twenty patients (10 treated and 10 placebo), suffering from active phase halitosis were included in the study. Treatment consisted of Lactobacillus brevis (CD2)—containing lozenges or placebo, 4 tablets/day for 14 days. t0 was before the beginning of the study; t1 was day 7 and t2 was day 14. The effectiveness of treatment was assessed through: (1) Rosenberg score; (2) Winkel tongue coating index (WTCI) anterior and posterior; (2) OralChroma™; (3) the new developed multi-sensor approach, called BIONOTE® (test technique). Only the WTCI anterior revealed statistically significant changes between t0 and t2 data (p = 0.014) in the treated group. Except for the WTCI anterior, all diagnostic methods revealed the lack of effectiveness for halitosis of a 14-days treatment with Lactobacillus brevis (CD2)–containing lozenges. The BIONOTE® multisensor system seems accurate in addition to OralChroma™ to assess the initial condition of halitosis and its mitigation during treatment.

Beschreibung: We examine a distributed detection problem in a wireless sensor network, where sensor nodes collaborate to detect a Gaussian signal with an unknown change of power, i.e., a scale parameter. Due to power/bandwidth constraints, we consider the case where each sensor quantizes its observation into a binary digit. The binary data are then transmitted through error-prone wireless links to a fusion center, where a generalized likelihood ratio test (GLRT) detector is employed to perform a global decision. We study the design of a binary quantizer based on an asymptotic analysis of the GLRT. Interestingly, the quantization threshold of the quantizer is independent of the unknown scale parameter. Numerical results are included to illustrate the performance of the proposed quantizer and GLRT in binary symmetric channels (BSCs).

Beschreibung: This paper presents a multipurpose and low cost sensor for the simultaneous monitoring of temperature and ullage of wine in barrels in two of the most important stages of winemaking, that being fermentation and maturation. The distributed sensor subsystem is imbedded within the bung of the barrel and runs on battery for a period of at least 12 months and costs around $27 AUD for all parts. In addition, software was designed which allows for the remote transmission and easy visual interpretation of the data for the winemaker. Early warning signals can be sent when the temperature or ullage deviates from a winemakers expectations so remedial action can be taken, such as when topping is required or the movement of the barrels to a cooler cellar location. Such knowledge of a wine’s properties or storage conditions allows for a more precise control of the final wine quality.

Beschreibung: A fast and effective wound healing process would substantially decrease medical costs, wound care supplies, and hospitalization significantly improving the patients’ quality of life. The search for effective therapeutic approaches seems to be imperative in order to avoid the aggravation of chronic wounds. In spite of all the efforts that have been made during the recent years towards the development of artificial wound dressings, none of the currently available options combine all the requirements necessary for quick and optimal cutaneous regeneration. Therefore, technological advances in the area of temporary and permanent smart dressings for wound care are required. The development of nanoscience and nanotechnology can improve the materials and designs used in topical wound care in order to efficiently release antimicrobial, anti-inflammatory and regenerative compounds speeding up the endogenous healing process. Nanostructured dressings can overcome the limitations of the current coverings and, separately, natural origin components can also overcome the drawbacks of current antibiotics and antiseptics (mainly cytotoxicity, antibiotic resistance, and allergies). The combination of natural origin components with demonstrated antibiotic, regenerative, or anti-inflammatory properties together with nanostructured materials is a promising approach to fulfil all the requirements needed for the next generation of bioactive wound dressings. Microbially compromised wounds have been treated with different essential oils, honey, cationic peptides, aloe vera, plant extracts, and other natural origin occurring antimicrobial, anti-inflammatory, and regenerative components but the available evidence is limited and insufficient to be able to draw reliable conclusions and to extrapolate those findings to the clinical practice. The evidence and some promising preliminary results indicate that future comparative studies are justified but instead of talking about the beneficial or inert effects of those natural origin occurring materials, the scientific community leads towards the identification of the main active components involved and their mechanism of action during the corresponding healing, antimicrobial, or regenerative processes and in carrying out systematic and comparative controlled tests. Once those natural origin components have been identified and their efficacy validated through solid clinical trials, their combination within nanostructured dressings can open up new avenues in the fabrication of bioactive dressings with outstanding characteristics for wound care. The motivation of this work is to analyze the state of the art in the use of different essential oils, honey, cationic peptides, aloe vera, plant extracts, and other natural origin occurring materials as antimicrobial, anti-inflammatory and regenerative components with the aim of clarifying their potential clinical use in bioactive dressings. We conclude that, for those natural occurring materials, more clinical trials are needed to reach a sufficient level of evidence as therapeutic agents for wound healing management.

Beschreibung: Multiple stable states are established in coastal tidal wetlands (marshes, mangroves, deltas, seagrasses) by ecological, hydrological, and geomorphological feedbacks. Catastrophic shifts between states can be induced by gradual environmental change or by disturbance events. These feedbacks and outcomes are key to the sustainability and resilience of vegetated coastlines, especially as modulated by human activity, sea level rise, and climate change. Whereas multiple stable state theory has been invoked to model salt marsh responses to sediment supply and sea level change, there has been comparatively little empirical verification of the theory for salt marshes or other coastal wetlands. Especially lacking is long-term evidence documenting if or how stable states are established and maintained at ecosystem scales. Laboratory and field-plot studies are informative, but of necessarily limited spatial and temporal scope. For the purposes of long-term, coastal-scale monitoring, remote sensing is the best viable option. This review summarizes the above topics and highlights the emerging promise and challenges of using remote sensing-based analyses to validate coastal wetland dynamic state theories. This significant opportunity is further framed by a proposed list of scientific advances needed to more thoroughly develop the field.

Beschreibung: As internet technologies make their way into developing areas, so too does the possibility of education and training being delivered to the people living in those previously unserved areas. The growing catalogue of free, high quality courseware, when combined with the newly acquired means of delivery, creates the potential for millions of people in the developing world to acquire a good education. Yet a good education obviously requires more than simply delivering information; students must also receive high quality feedback on their assessments. They must be told how their performance compares with the ideal, and be shown how to close the gap between the two. However, delivering high quality feedback is labor-intensive, and therefore expensive, and has long been recognized as a problematic issue by educators. This paper outlines a case study that uses a Learning Management System (LMS) to efficiently deliver detailed feedback that is informed by the principles of best practice. We make the case that the efficiencies of this method allow for large-scale courses with thousands of enrolments that are accessible to developing and developed areas alike. We explore the question; is computer-mediated feedback delivery efficient and effective and might it be applied to large-scale courses at low-cost?

Beschreibung: This paper provides an overview of the main manufacturing technologies of displays, focusing on those with low and ultra-low levels of power consumption, which make them suitable for current societal needs. Considering the typified value obtained from the manufacturer’s specifications, four technologies—Liquid Crystal Displays, electronic paper, Organic Light-Emitting Display and Electroluminescent Displays—were selected in a first iteration. For each of them, several features, including size and brightness, were assessed in order to ascertain possible proportional relationships with the rate of consumption. To normalize the comparison between different display types, relative units such as the surface power density and the display frontal intensity efficiency were proposed. Organic light-emitting display had the best results in terms of power density for small display sizes. For larger sizes, it performs less satisfactorily than Liquid Crystal Displays in terms of energy efficiency.

Beschreibung: Model selection is an integral, yet contentious, component of epidemiologic research. Unfortunately, there remains no consensus on how to identify a single, best model among multiple candidate models. Researchers may be prone to selecting the model that best supports their a priori, preferred result; a phenomenon referred to as “wish bias”. Directed acyclic graphs (DAGs), based on background causal and substantive knowledge, are a useful tool for specifying a subset of adjustment variables to obtain a causal effect estimate. In many cases, however, a DAG will support multiple, sufficient or minimally-sufficient adjustment sets. Even though all of these may theoretically produce unbiased effect estimates they may, in practice, yield somewhat distinct values, and the need to select between these models once again makes the research enterprise vulnerable to wish bias. In this work, we suggest combining adjustment sets with model averaging techniques to obtain causal estimates based on multiple, theoretically-unbiased models. We use three techniques for averaging the results among multiple candidate models: information criteria weighting, inverse variance weighting, and bootstrapping. We illustrate these approaches with an example from the Pregnancy, Infection, and Nutrition (PIN) study. We show that each averaging technique returns similar, model averaged causal estimates. An a priori strategy of model averaging provides a means of integrating uncertainty in selection among candidate, causal models, while also avoiding the temptation to report the most attractive estimate from a suite of equally valid alternatives.

Beschreibung: The widespread, intentional and increasingly frequent chemical emplacement in the troposphere has gone unidentified and unremarked in the scientific literature for years. The author presents evidence that toxic coal combustion fly ash is the most likely aerosolized particulate sprayed by tanker-jets for geoengineering, weather-modification and climate-modification purposes and describes some of the multifold consequences on public health. Two methods are employed: (1) Comparison of 8 elements analyzed in rainwater, leached from aerosolized particulates, with corresponding elements leached into water from coal fly ash in published laboratory experiments, and (2) Comparison of 14 elements analyzed in dust collected outdoors on a high-efficiency particulate air (HEPA) filter with corresponding elements analyzed in un-leached coal fly ash material. The results show: (1) the assemblage of elements in rainwater and in the corresponding experimental leachate are essentially identical. At a 99% confidence interval, they have identical means (T-test) and identical variances (F-test); and (2) the assemblage of elements in the HEPA dust and in the corresponding average un-leached coal fly ash are likewise essentially identical. The consequences on public health are profound, including exposure to a variety of toxic heavy metals, radioactive elements, and neurologically-implicated chemically mobile aluminum released by body moisture in situ after inhalation or through transdermal induction.

Beschreibung: The impacts of climate change on human health have been documented globally and in the United States. Numerous studies project greater morbidity and mortality as a result of extreme weather events and other climate-sensitive hazards. Public health impacts on the U.S. Gulf Coast may be severe as the region is expected to experience increases in extreme temperatures, sea level rise, and possibly fewer but more intense hurricanes. Through myriad pathways, climate change is likely to make the Gulf Coast less hospitable and more dangerous for its residents, and may prompt substantial migration from and into the region. Public health impacts may be further exacerbated by the concentration of people and infrastructure, as well as the region’s coastal geography. Vulnerable populations, including the very young, elderly, and socioeconomically disadvantaged may face particularly high threats to their health and well-being. This paper provides an overview of potential public health impacts of climate variability and change on the Gulf Coast, with a focus on the region’s unique vulnerabilities, and outlines recommendations for improving the region’s ability to minimize the impacts of climate-sensitive hazards. Public health adaptation aimed at improving individual, public health system, and infrastructure resilience is urgently needed to meet the challenges climate change may pose to the Gulf Coast in the coming decades.

Beschreibung: This study forecasts the liquidity gap in China’s pension scheme for urban workers in the context of an ageing population and the possible effects of recent governmental policies by constructing a basic pension model, including “old people”, “middle people” and “new people” and a simulation method. We find, firstly, that China’s liquidity gap of pension will reach its peak of approximately 13.11 trillion yuan in 2038. Subsequently, this gap will gradually decrease with growth in the mortality rate. Secondly, reasonable intervals for the replacement and contribution rates should be set at [0.417, 0.604] and [0.189, 0.262], respectively, to sustain China’s pension system. Thirdly, compared to increasing fiscal subsidies, an income doubling plan, raising the contribution rate, lowering the replacement rate and delaying the retirement age can significantly reduce the liquidity gap, although the policy costs are relatively high. A policy permitting families to have two children will increase the rate of reduction of the liquidity gap, but it cannot effectively narrow the gap at the peak moment.

Beschreibung: More and more hybrid electric vehicles are driven since they offer such advantages as energy savings and better active safety performance. Hybrid vehicles have two or more power driving systems and frequently switch working condition, so controlling stability is very important. In this work, a two-stage Kalman algorithm method is used to fuse data in hybrid vehicle stability testing. First, the RT3102 navigation system and Dewetron system are introduced. Second, a modeling of data fusion is proposed based on the Kalman filter. Then, this modeling is simulated and tested on a sample vehicle, using Carsim and Simulink software to test the results. The results showed the merits of this modeling.

Beschreibung: The aim of this study was to investigate how atmospheric air pollutants and meteorological conditions affected atmospheric visibility in the largest Polish agglomeration. The correlation analysis, principal component analysis (PCA) and generalized regression models (GRMs) were used to accomplish this objective. The meteorological parameters (temperature, relative humidity, precipitation, wind speed and insolation) and concentrations of the air pollutants (PM10, SO2, NO2, CO and O3) were recorded in 2004–2013. The data came from the Ursynów-SGGW, MzWarszUrsynów and Okęcie monitoring stations, located in the south of Warsaw (Poland). It was shown that the PM10 concentration was the most important parameter affecting the visibility in Warsaw. The concentration, and indirectly the visibility, was mainly affected by the pollutant emission from the flat/building heating (combustion of various fuels). It changed intensively during the research period. There were also periods in which this emission type did not have a great influence on the pollutant concentrations (mainly PM10) and visibility. In such seasons, the research revealed the influence of the traffic emission and secondary aerosol formation processes on the visibility.

Beschreibung: Aquatic vegetation serves many important ecological and socioeconomic functions in lake ecosystems. The presence of floating algae poses difficulties for accurately estimating the distribution of aquatic vegetation in eutrophic lakes. We present an approach to map the distribution of aquatic vegetation in Lake Taihu (a large, shallow eutrophic lake in China) and reduce the influence of floating algae on aquatic vegetation mapping. Our approach involved a frequency analysis over a 2003–2013 time series of the floating algal index (FAI) based on moderate-resolution imaging spectroradiometer (MODIS) data. Three phenological periods were defined based on the vegetation presence frequency (VPF) and the growth of algae and aquatic vegetation: December and January composed the period of wintering aquatic vegetation; February and March composed the period of prolonged coexistence of algal blooms and wintering aquatic vegetation; and June to October was the peak period of the coexistence of algal blooms and aquatic vegetation. By comparing and analyzing the satellite-derived aquatic vegetation distribution and 244 in situ measurements made in 2013, we established a FAI threshold of −0.025 and VPF thresholds of 0.55, 0.45 and 0.85 for the three phenological periods. We validated the accuracy of our approach by comparing the results between the satellite-derived maps and the in situ results obtained from 2008–2012. The overall classification accuracy was 87%, 81%, 77%, 88% and 73% in the five years from 2008–2012, respectively. We then applied the approach to the MODIS images from 2003–2013 and obtained the total area of the aquatic vegetation, which varied from 265.94 km2 in 2007 to 503.38 km2 in 2008, with an average area of 359.62 ± 69.20 km2 over the 11 years. Our findings suggest that (1) the proposed approach can be used to map the distribution of aquatic vegetation in eutrophic algae-rich waters and (2) dramatic changes occurred in the distribution of aquatic vegetation in Lake Taihu during the 11-year study.

Beschreibung: Diffuse Correlation Spectroscopy (DCS) is a well-established optical technique that has been used for non-invasive measurement of blood flow in tissues. Instrumentation for DCS includes a correlation device that computes the temporal intensity autocorrelation of a coherent laser source after it has undergone diffuse scattering through a turbid medium. Typically, the signal acquisition and its autocorrelation are performed by a correlation board. These boards have dedicated hardware to acquire and compute intensity autocorrelations of rapidly varying input signal and usually are quite expensive. Here we show that a Raspberry Pi minicomputer can acquire and store a rapidly varying time-signal with high fidelity. We show that this signal collected by a Raspberry Pi device can be processed numerically to yield intensity autocorrelations well suited for DCS applications. DCS measurements made using the Raspberry Pi device were compared to those acquired using a commercial hardware autocorrelation board to investigate the stability, performance, and accuracy of the data acquired in controlled experiments. This paper represents a first step toward lowering the instrumentation cost of a DCS system and may offer the potential to make DCS become more widely used in biomedical applications.

Beschreibung: Wind tunnels are a key experimental tool for the analysis of airflow parameters in many fields of application. Despite their great potential impact on agricultural research, few contributions have dealt with the development of automatic control systems for wind tunnels in the field of greenhouse technology. The objective of this paper is to present an automatic control system that provides precision and speed of measurement, as well as efficient data processing in low-speed wind tunnel experiments for greenhouse engineering applications. The system is based on an algorithm that identifies the system model and calculates the optimum PI controller. The validation of the system was performed on a cellulose evaporative cooling pad and on insect-proof screens to assess its response to perturbations. The control system provided an accuracy of 〈0.06 m·s‾1 for airflow speed and 〈0.50 Pa for pressure drop, thus permitting the reproducibility and standardization of the tests. The proposed control system also incorporates a fully-integrated software unit that manages the tests in terms of airflow speed and pressure drop set points.

Beschreibung: A new application of utilizing ultra-wideband (UWB) technology to sense wind turbine blade deflections is introduced in this paper for wind energy cost reduction. The lower UWB band of 3.1–5.3 GHz is applied. On each blade, there will be one UWB blade deflection sensing system, which consists of two UWB antennas at the blade root and one UWB antenna at the blade tip. The detailed topology and challenges of this deflection sensing system are addressed. Due to the complexity of the problem, this paper will first realize the on-blade UWB radio link in the simplest case, where the tip antenna is situated outside (and on the surface of) a blade tip. To investigate this case, full-blade time-domain measurements are designed and conducted under different deflections. The detailed measurement setups and results are provided. If the root and tip antenna locations are properly selected, the first pulse is always of sufficient quality for accurate estimations under different deflections. The measured results reveal that the blade tip-root distance and blade deflection can be accurately estimated in the complicated and lossy wireless channels around a wind turbine blade. Some future research topics on this application are listed finally.

Beschreibung: A method for measuring shaft diameters is presented using structured light vision measurement. After calibrating a model of the structured light measurement, a virtual plane is established perpendicular to the measured shaft axis and the image of the light stripe on the shaft is projected to the virtual plane. On the virtual plane, the center of the measured shaft is determined by fitting the projected image under the geometrical constraints of the light stripe, and the shaft diameter is measured by the determined center and the projected image. Experiments evaluated the measuring accuracy of the method and the effects of some factors on the measurement are analyzed.

Beschreibung: Understanding the relationship between land use and surface water quality is necessary for effective water management. We estimated the impacts of catchment-wide land use on water quality during the dry and rainy seasons in the Dongjiang River basin, using remote sensing, geographic information systems and multivariate statistical techniques. The results showed that the 83 sites can be divided into three groups representing different land use types: forest, agriculture and urban. Water quality parameters exhibited significant variations between the urban-dominated and forest-dominated sites. The proportion of forested land was positively associated with dissolved oxygen concentration but negatively associated with water temperature, electrical conductivity, permanganate index, total phosphorus, total nitrogen, ammonia nitrogen, nitrate nitrogen and chlorophyll-a. The proportion of urban land was strongly positively associated with total nitrogen and ammonia nitrogen concentrations. Forested and urban land use had stronger impacts on water quality in the dry season than in the rainy season. However, agricultural land use did not have a significant impact on water quality. Our study indicates that urban land use was the key factor affecting water quality change, and limiting point-source waste discharge in urban areas during the dry season would be critical for improving water quality in the study area.

Beschreibung: The morphological properties of kaolin flocs were investigated in a Couette-flow experiment at the steady state under seven shear flow conditions (shear rates of 5.36, 9.17, 14, 24, 31, 41 and 53 s−1). These properties include a one-dimensional (1-D) fractal dimension (D1), a two-dimensional (2-D) fractal dimension (D2), a perimeter-based fractal dimension (Dpf) and an aspect ratio (AR). They were calculated based on the projected area (A), equivalent size, perimeter (P) and length (L) of the major axis of the floc determined through sample observation and an image analysis system. The parameter D2, which characterizes the relationship between the projected area and the length of the major axis using a power function, , increased from 1.73 ± 0.03, 1.72 ± 0.03, and 1.75 ± 0.04 in the low shear rate group (G = 5.36, 9.17, and 14 s−1) to 1.92 ± 0.03, 1.82 ± 0.02, 1.85 ± 0.02, and 1.81 ± 0.02 in the high shear rate group (24, 31, 41 and 53 s−1), respectively. The parameter D1 characterizes the relationship between the perimeter and length of the major axis by the function  and decreased from 1.52 ± 0.02, 1.48 ± 0.02, 1.55 ± 0.02, and 1.63 ± 0.02 in the low shear group (5.36, 9.17, 14 and 24 s−1) to 1.45 ± 0.02, 1.39 ± 0.02, and 1.39 ± 0.02 in the high shear group (31, 41 and 53 s−1), respectively. The results indicate that with increasing shear rates, the flocs become less elongated and that their boundary lines become tighter and more regular, caused by more breakages and possible restructurings of the flocs. The parameter Dpf, which is related to the perimeter and the projected area through the function , decreased as the shear rate increased almost linearly. The parameter AR, which is the ratio of the length of the major axis and equivalent diameter, decreased from 1.56, 1.59, 1.53 and 1.51 in the low shear rate group to 1.43, 1.47 and 1.48 in the high shear rate group. These changes in Dpf and AR show that the flocs become less convoluted and more symmetrical and that their boundaries become smoother and more regular in the high shear rate group than in the low shear rate group due to breakage and possible restructuring processes. To assess the effects of electrolyte and sediment concentration, 0.1 mol/L calcium chloride (CaCl2) and initial sediment concentration from 7.87 × 10−5 to 1.57 × 10−5 were used in this preliminary study. The addition of electrolyte and increasing sediment concentration could produce more symmetrical flocs with less convoluted and simpler boundaries. In addition, some new information on the temporal variation of the median size of the flocs during the flocculation process is presented.

Beschreibung: Accurate state of charge (SoC) estimation of batteries plays an important role in promoting the commercialization of electric vehicles. The main work to be done in accurately determining battery SoC can be summarized in three parts. (1) In view of the model-based SoC estimation flow diagram, the n-order resistance-capacitance (RC) battery model is proposed and expected to accurately simulate the battery’s major time-variable, nonlinear characteristics. Then, the mathematical equations for model parameter identification and SoC estimation of this model are constructed. (2) The Akaike information criterion is used to determine an optimal tradeoff between battery model complexity and prediction precision for the n-order RC battery model. Results from a comparative analysis show that the first-order RC battery model is thought to be the best based on the Akaike information criterion (AIC) values. (3) The real-time joint estimator for the model parameter and SoC is constructed, and the application based on two battery types indicates that the proposed SoC estimator is a closed-loop identification system where the model parameter identification and SoC estimation are corrected mutually, adaptively and simultaneously according to the observer values. The maximum SoC estimation error is less than 1% for both battery types, even against the inaccurate initial SoC.

Beschreibung: This is the second part of a study conducted to model the aerothermodynamic impact of suction parameters and gas properties on a multi-stage centrifugal compressor’s performance. A new iterative method has been developed in the first part to derive the equivalent performance at various operating conditions. This approach has been validated to predict the compressor map at different suction pressures and temperatures using the design characteristics as reference values. A further case is included in this paper in order to emphasize the validity of the developed approach to obtain the performance characteristics at various gas compositions. The provided example shows that the performance parameters at different gas mixtures can be predicted to within ±1.34%. Furthermore, the conducted optimization in this paper reveals that the proposed method can be applied for the compressor design evaluation corresponding to the expected variation in suction conditions. Moreover, the examined case study demonstrates the effect of gas properties’ variation on the operating point and aerodynamic stability of the entire compression system. In order to achieve that, a simple approach has been established to assess the contribution of gas properties’ variation to the inefficient and unstable compressor performance based on the available operational data.

Beschreibung: The in-wheel electric vehicle is expected to be a popular next-generation vehicle because an in-wheel system can simplify the powertrain and improve driving performance. In addition, it also has an advantage in that it maximizes driving efficiency through independent torque control considering the motor efficiency. However, there is an instability problem if only the driving torque is controlled in consideration of only the motor efficiency. In this paper, integrated torque distribution strategies are proposed to overcome these problems. The control algorithm consists of various strategies for optimizing driving efficiency, satisfying driver demands, and considering tire slip and vehicle cornering. Fuzzy logic is used to determine the appropriate timing of intervention for each distribution strategy. A performance simulator for in-wheel electric vehicles was developed by using MATLAB/Simulink and CarSim to validate the control strategies. From simulation results under complex driving conditions, the proposed algorithm was verified to improve both the driving stability and fuel economy of the in-wheel vehicle.

Beschreibung: The knowledge of unsteady forces is necessary when designing vertical axis wind turbines (VAWTs). Measurement data for turbines operating at an open site are still very limited. The data obtained from wind tunnels or towing tanks can be used, but have limited applicability when designing large-scale VAWTs. This study presents experimental data on the normal forces of a 12-kW straight-bladed VAWT operated at an open site north of Uppsala, Sweden. The normal forces are measured with four single-axis load cells. The data are obtained for a wide range of tip speed ratios: from 1.7 to 4.6. The behavior of the normal forces is analyzed. The presented data can be used in validations of aerodynamic models and the mechanical design for VAWTs.

Beschreibung: This paper introduces a new iterative method to predict the equivalent centrifugal compressor performance at various operating conditions. The presented theoretical analysis and empirical correlations provide a novel approach to derive the entire compressor map corresponding to various suction conditions without a prior knowledge of the detailed geometry. The efficiency model was derived to reflect the impact of physical gas properties, Mach number, and flow and work coefficients. One of the main features of the developed technique is the fact that it considers the variation in the gas properties and stage efficiency which makes it appropriate with hydrocarbons. This method has been tested to predict the performance of two multistage centrifugal compressors and the estimated characteristics are compared with the measured data. The carried comparison revealed a good matching with the actual values, including the stable operation region limits. Furthermore, an optimization study was conducted to investigate the influences of suction conditions on the stage efficiency and surge margin. Moreover, a new sort of presentation has been generated to obtain the equivalent performance characteristics for a constant discharge pressure operation at variable suction pressure and temperature working conditions. A further validation is included in part two of this study in order to evaluate the prediction capability of the derived model at various gas compositions.

Beschreibung: This paper presents an investigation of sewage sludge gasification in a fixed bed gasifier. Experiments were conducted on a laboratory scale fixed bed gasifier. In the experiments, two types of dried sewage sludge were tested and their properties were analysed. Parameters such as air ratio λ = 0.12 to 0.27, gasification agent temperature t = 50 to 250 °C and gasification agent composition ( = 0.21 and  &gt; 0.21) were found to influence on temperature distribution, syngas Lower Heating Value (LHV) and syngas composition. The results indicate that the syngas LHV was found to decrease with increased air ratio for all analyzed cases: cold and preheated air and cold enriched air. The increase in the percentage of the main combustible components was accompanied by a decrease in the concentration of carbon dioxide. Increasing oxygen concentration increased the temperature, which tended to favor the formation of smaller molecules in the gas mixture. Thus, the enriched air medium produced a gas with a higher LHV. In contrast to conventional gasification, gasification process with gasification agent preheating causes that the flux of heat necessary to support endothermic gasification reactions is producing more effective. Air preheating causes increases hydrogen and carbon monoxide production.

Beschreibung: Aiming at the combined power quality +disturbance recognition, an automated recognition method based on wavelet packet entropy (WPE) and modified incomplete S-transform (MIST) is proposed in this paper. By combining wavelet packet Tsallis singular entropy, energy entropy and MIST, a 13-dimension vector of different power quality (PQ) disturbances including single disturbances and combined disturbances is extracted. Then, a ruled decision tree is designed to recognize the combined disturbances. The proposed method is tested and evaluated using a large number of simulated PQ disturbances and some real-life signals, which include voltage sag, swell, interruption, oscillation transient, impulsive transient, harmonics, voltage fluctuation and their combinations. In addition, the comparison of the proposed recognition approach with some existing techniques is made. The experimental results show that the proposed method can effectively recognize the single and combined PQ disturbances.

Beschreibung: For general metric theories of gravity, we compare the approach that describes/derives the field equations of gravity as a thermodynamic identity with the one which looks at them from entropy bounds. The comparison is made through the consideration of the matter entropy flux across (Rindler) horizons, studied by making use of the notion of a limiting thermodynamic scale l* of matter, previously introduced in the context of entropy bounds. In doing this: (i) a bound for the entropy of any lump of matter with a given energy-momentum tensor Tab is considered, in terms of a quantity, which is independent of the theory of gravity that we use; this quantity is the variation of the Clausius entropy of a suitable horizon when the element of matter crosses it; (ii) by making use of the equations of motion of the theory, the same quantity is then expressed as the variation of Wald’s entropy of that horizon (and this leads to a generalized form of the generalized covariant entropy bound, applicable to general diffeomorphism-invariant theories of gravity); and (iii) a notion of l* for horizons, as well as an expression for it, is given.

Beschreibung: Controlling competing vegetation during early growth is one of the most important practices for the successful establishment of poplar plantations. Today, most poplar plantations in temperate regions are established on abandoned marginal agricultural land where competing vegetation is usually present during the first years after planting. Thus, the objective of this study was to examine how the growth of two kinds of poplar planting materials, un-rooted cuttings and bare-rooted seedlings was influenced by different vegetation control and soil preparation practices. Across treatments, un-rooted cuttings grew more rapidly than the bare-rooted seedlings. Our results also show that mulching with a degradable carpet or permanent polyethylene plastic increased seedling growth to a similar extent and more strongly in the cases of no treatment (in control plots). In addition, the results suggest that soil preparation in the mulched area favored seedling growth, but this effect was restricted to the first year after planting. These findings indicate that optimal practices for establishing poplar plantations on former agricultural land include planting un-rooted cuttings in prepared soil and mulching.

Beschreibung: In this paper, the classification via sprepresentation and multitask learning is presented for target recognition in SAR image. To capture the characteristics of SAR image, a multidimensional generalization of the analytic signal, namely the monogenic signal, is employed. The original signal can be then orthogonally decomposed into three components: 1) local amplitude; 2) local phase; and 3) local orientation. Since the components represent the different kinds of information, it is beneficial by jointly considering them in a unifying framework. However, these components are infeasible to be directly utilized due to the high dimension and redundancy. To solve the problem, an intuitive idea is to define an augmented feature vector by concatenating the components. This strategy usually produces some information loss. To cover the shortage, this paper considers three components into different learning tasks, in which some common information can be shared. Specifically, the component-specific feature descriptor for each monogenic component is produced first. Inspired by the recent success of multitask learning, the resulting features are then fed into a joint sparse representation model to exploit the intercorrelation among multiple tasks. The inference is reached in terms of the total reconstruction error accumulated from all tasks. The novelty of this paper includes 1) the development of three component-specific feature descriptors; 2) the introduction of multitask learning into sparse representation model; 3) the numerical implementation of proposed method; and 4) extensive comparative experimental studies on MSTAR SAR dataset, including target recognition under standard operating conditions, as well as extended operating conditions, and the capability of outliers rejection.

Beschreibung: Offsets of synthetic aperture radar (SAR) images have played an important role in deriving complete three-dimensional (3-D) surface displacement fields in geoscientific applications. However, offset maps often suffer from multiple outliers and patch-like artifacts, because the standard offset-measurement method is a regular moving-window operation that does not consider the scattering characteristics of the ground. Here, we show that by focusing the offset measurements on predetected strong reflectors, the reliability and accuracy of SAR offsets can be significantly improved. Application to the 2011 Van (Turkey) earthquake reveals a clear deformation signal from an otherwise decorrelated interferogram, making derivation of the 3-D coseismic displacement field possible. Our proposed method can improve mapping of coseismic deformation and other ground displacements, such as glacier flow and landslide movement when strong reflectors exist.

Beschreibung: We present an accelerated probabilistic learning concept and its prototype implementation for mining heterogeneous Earth observation images, e.g., multispectral images, synthetic aperture radar (SAR) images, image time series, or geographical information systems (GIS) maps. The system prototype combines, at pixel level, the unsupervised clustering results of different features, extracted from heterogeneous satellite images and geographical information resources, with user-defined semantic annotations in order to calculate the posterior probabilities that allow the final probabilistic searches. The system is able to learn different semantic labels based on a newly developed Bayesian networks algorithm and allows different probabilistic retrieval methods of all semantically related images with only a few user interactions. The new algorithm reduces the computational cost, overperforming existing conventional systems, under certain conditions, by several orders of magnitude. The achieved speed-up allows the introduction of new feature models improving the learning capabilities of knowledge-driven image information mining systems and opening them to Big Data environments.

Beschreibung: The mineralogy and environmental history of Mars are being extensively studied through remote sensing observations paired with laboratory and in situ experiments. A significant portion of these experiments is being devoted to the identification and mapping of different iron oxides present in the Martian terrains. Among these compounds, goethite has been an object of great interest since its occurrence can be interpreted as mineralogical evidence of past aqueous activity on those landscapes. Although such experiments can provide valuable information regarding the presence of these minerals, the scope of the resulting observations may be hindered by logistics and cost-related constraints. We believe that predictive computer simulations can be employed to mitigate some of these constraints and contribute to the generation and validation of hypotheses in this area. Accordingly, we propose the use of SPLITS ( Sp ectral Li ght T ransport Model for S and) in investigations involving the spectral signatures of iron-bearing regions of Mars. In this paper, we initially demonstrate the predictive capabilities of the SPLITS model in this context through qualitative comparisons of modeled results with actual observations and measured data. Using the resulting modeled reflectance curves as our baseline data, we then perform a series of controlled computational experiments to investigate how variations on goethite and hematite content affect the spectral responses of Martian sand-textured soils.

Beschreibung: Thermal infrared (TIR) time series are exploited by many methods based on Earth observation (EO), for such applications as agriculture, forest management, and meteorology. However, due to physical limitations, data acquired by a single sensor are often unsatisfactory in terms of spatial or temporal resolution. This issue can be tackled by using remotely sensed data acquired by multiple sensors with complementary features. When nonreal-time functioning or at least near real-time functioning is admitted, the measurements can be profitably fed to a sequential Bayesian algorithm, which allows to account for the correlation embedded in the successive acquisitions. In this work, we focus on applications that allow the batch processing of the whole data sequences acquired in a fixed time interval. In this case, multiple options for improving the final product are offered by the Bayesian framework, based on both sequential and smoothing techniques. We consider several such Bayesian strategies and comparatively assess their performances in practical applications and through real thermal data acquired by the SEVIRI and MODIS sensors, encompassing the presence of multiple disturbance source, e.g., the cloud coverage of the illuminated scene.

Beschreibung: Land surface albedo, qualifying the ratio of the radiant flux reflected from the land surface to the incident flux, is a key forcing parameter controlling the Earth’s energy budget. Previously, several BRDF archetypes were distilled from high-quality MODIS BRDF/Albedo products. In this study, we propose a method that largely relies on matching observed multiangular reflectances with the most appropriate of these prior BRDF archetypes to determine the amplitude and shape of the actual surface BRDFs, when directional signatures are insufficient. This method is first evaluated using an assortment of multisource BRDF data sets to demonstrate its viability for surface albedo estimates, and then is applied to airborne wide-angle infrared dual-mode line/area array scanner (WIDAS) from the Watershed Allied Telemetry Experimental Research (WATER) campaign in the Heihe River Basin of China in 2008. This algorithm makes use of the linear MODIS BRDF model to determine the BRDF archetypes needed as prior knowledge for intrinsic spectral albedo estimates. The intrinsic spectral albedos are then used to estimate actual spectral albedos by considering the proportion of direct and diffuse solar radiation. A spectral-to-broadband conversion is performed to generate the broadband albedo at shortwave regimes through the use of conversion coefficients derived from extensive radiative transfer simulations. A further validation confirms that the estimated albedos are consistent with in situ field measured albedos over available corn crop sites. This method provides a major advantage on utilizing generalized BRDF information derived from MODIS in conjunction with other instrument data that are acquired with less angular variation.

Beschreibung: Ocean current is highly related to the interaction between ocean and atmosphere. By measuring the speed and direction of the ocean current from space, we can investigate the ocean–atmosphere interaction on a global scale. The ocean–atmosphere interaction helps to maintain the balance that is essential for planet habitability. However, the conventional scatterometer is unable to measure the ocean current vector. To achieve this, a potentially feasible approach is to use a bigger antenna, a higher PRF, and measure the interferometric phase of two successive echoes. This paper derives four decorrelation factors, and provides the phase error model first. Then, an end-to-end simulation model is established, and it is used to analyze the feasibility of ocean surface current measurement from space. Based on the simulation model, the system parameters are optimized. The simulation results show that the current speed standard deviation (Std), which means the measurement accuracy, in along-track and cross-track direction is smaller than 0.1 m/s when the wind speed is larger than 4 m/s. The swath can be used for current vector inversion that is greater than 70% when the wind speed is larger than 7 m/s. Meanwhile, ${{bf K}_{{bf pc}}}$ of the modified scatterometer is computed and the results show that ${{bf K}_{{bf pc}}}$ is better than the traditional pencil-beam rotating scatterometer when the wind speed is larger than 6 m/s.

Beschreibung: High-resolution three-dimensional (3-D) radar imaging of space targets in micromotion plays a significant role in space target recognition and space situation awareness; thus, it has attracted extensive attention in recent years. Because of the fast rotation, some scattering centers are occluded by others, i.e., the scattering centers cannot be continuously illuminated by radar in the imaging interval, and their radar echoes are discontinuous. In this paper, a nonparametric 3-D imaging method based on scattering center trajectory association is proposed. It deals with target occlusion using the Riemannian manifold optimization and obtains focused imaging of targets in complex micromotion. The effectiveness of the proposed method is validated using simulated data.

Beschreibung: Recently, satellite-based systems have been introduced that utilize angle-of-arrival (AOA) measurements to geo-locate objects of interest. In the previous work, we considered the application of nonlinear optimization to AoA-based geolocation to these systems. This previous work, however, assumed that all noise sources were independent. In the case of fast-moving objects, however, there is a significant source of error due to the propagation time inherent in satellite-based observation of objects due to the difference between the location of the object when it is observed by a satellite, and the location of the object when it emitted the signal that is being measured. This introduces a systematic error into the system that cannot be resolved by the system proposed by Burchett et al. In this paper, we extend our prior work to account for the time-delay inherent in satellite-based geolocation systems, making this system accurate for fast-movers as well as fixed or slow-moving objects. Results demonstrating significant improvement in geolocation performance both in terms of accuracy and estimated error bounds are presented.

Beschreibung: Most of existing change detection methods could be classified into three groups, the traditional pixel-based change detection (PBCD), the object-based change detection (OBCD), and the hybrid change detection (HCD). Nevertheless, both PBCD and OBCD have disadvantages, and classical HCD methods belong to intuitive decision-level fusion schemes of PBCD and OBCD. There is no optimum HCD method as of yet. Analyzing the complementarities of PBCD and OBCD method, we propose a new unsupervised algorithm-level fusion scheme (UAFS-HCD) in this paper to improve the accuracy of PBCD using spatial context information through: 1) getting the preliminary change mask with PBCD at first to estimate some parameters for OBCD; 2) deriving the unchanged area mask to eliminate the areas without changes, reducing error amplification phenomenon of OBCD; and 3) obtaining the final change mask by means of OBCD method. Taking flood detection with multitemporal SAR data as an example, we compared the new scheme with some classical methods, including PBCD, OBCD, and HCD method and supervised manual trial-and-error procedure (MTEP). The experimental results of flood detection showed that the new scheme was efficient and robust, and its accuracy sometimes can even exceed MTEP.

Beschreibung: Low-energy technologies in the Internet of Things (IoTs) era are still unable to provide the reliability needed by the industrial world, particularly in terms of the wireless operation that pervasive deployments demand. While the industrial wireless performance has achieved an acceptable degree in communications, it is no easy task to determine an efficient energy-dimensioning of the device in order to meet the application requirements. This is especially true in the face of the uncertainty inherent in energy harvesting. Thus, it is of utmost importance to model and dimension the energy consumption of the IoT applications at the pre-deployment or pre-production stages, especially when considering critical factors, such as reduced cost, life-time, and available energy. This paper presents a comprehensive model for the power consumption of wireless sensor nodes. The model takes a system-level perspective to account for all energy expenditures: communications, acquisition and processing. Furthermore, it is based only on parameters that can empirically be quantified once the platform (i.e., technology) and the application (i.e., operating conditions) are defined. This results in a new framework for studying and analyzing the energy life-cycles in applications, and it is suitable for determining in advance the specific weight of application parameters, as well as for understanding the tolerance margins and tradeoffs in the system.

Beschreibung: With the development of Internet of Things (IoT), a large amount of machine-to-machine (M2M) devices produce the data from a huge number of M2M communications. A massive access congestion control scheme in M2M communication is important in a wireless M2M network, where a wireless M2M network is constituted by a large number of wireless M2M devices. In this paper, we developed a spiderweb-based massive access management protocol for M2M wireless networks. The wireless M2M network topology considered, in this paper, is a spiderweb-based topology, which belongs to a regular topology. The spiderweb-based topology is split into a number of sub-spiderweb, while each sub-spiderweb can be seen as a small reservoir. The main function of the small reservoir is to temporarily store the massive access if the congestion problem is occurred due to the massive assess has been suddenly happened from the M2M devices. When the congestion problem is alleviated gradually, the temporarily-stored massive assess can be digested from these small reservoirs. The contribution of the proposed scheme is to reduce the packet loss rate and prolong the wireless M2M network lifetime. In addition, a dynamically adjustment of the different sub-spiderweb size is developed based on the amount of different data traffics. Simulation result finally illustrates that the proposed mechanism significantly reduces the packet loss rate and keeps the maximum network lifetime.

Beschreibung: The paper presents the methodology including the deployment of a structure comprising of C-clamp magnetic stripes and a self-calibration scheme using a four-coil design to resolve the issues of the interference and misplacement problems existing in the flexible nonintrusive current sensor tag for the current detection of household two-wire power lines. Experimental results show that the stripe structure can effectively screen out the magnetic flux originating from the nearby power line for the reduction of sensing error caused by the electromagnetic field interference and the calibration scheme containing the correction of horizontal misplacement and the analysis of power cable thickness via the four-coil design can provide the information of sensor location for accurate current sensing. Less than 4% of sensing error indicates that the proposed methodology can indeed facilitate the flexible current sensor tag for practical use.

Beschreibung: Rapidly emerging batteryless sensors are creating tremendous opportunities for truly wearable sensors for activity recognition. However, data streams from such sensors are characterized by sparsity and noise, which make activity recognition a challenging task. In this paper, we study the feasibility of passive computational RFID sensors for ambulatory monitoring. In particular, we focus on recognizing transfers out of beds or chairs and walking. Ideally, all these activities need to be monitored by movement sensor alarm systems to alert caregivers to provide supervision during the ambulation of older people in hospitals and nursing homes to prevent a fall. Our novel approach to partition continuous sensor data on natural activity boundaries and to identify transfers out of beds or chairs and walking as transitions between sequences of movements overcomes issues posed by the sparsity and the noise. We demonstrate through in-depth experiments the high performance (F-score > 93%) and the responsiveness of our approach.