ALBERT

Description: This data set includes the results of high-resolution digital elevation models (DEM) and digital image correlation (DIC) analysis applied to analogue modelling experiments. Twenty generic analogue models are extended on top of a rubber sheet. Two benchmark experiments are also reported. Detailed descriptions of the experiments can be found in Liu et al. (submitted) to which this data set is supplement. The data presented here are visualized as topography and the horizontal cumulative surface strain (principal strain and slip rake).

Description: This publication provides the codes produced for the article "Temporally dynamic carbon dioxide and methane emission factors for rewetted peatlands. Nature Communications Earth and Environment" by Aram Kalhori, Christian Wille, Pia Gottschalk, Zhan Li, Josh Hashemi, Karl Kemper, and Torsten Sachs (https://doi.org/10.1038/s43247-024-01226-9). In the article, the authors estimate the cumulative GHG emissions of a rewetted peatland in Germany using the long-term ecosystem flux measurements. They observe a source-to-sink transition of annual carbon dioxide (CO2) fluxes and decreasing trend of methane (CH4) emissions. This software is written in R and MATLAB. Running the codes ([R files and .m files](Code)) and loading the data files ([CSV files and .mat files](Data)) requires the pre-installation of [R and RStudio] (https://posit.co/downloads/) and ([MATLAB]. The RStudio 2022.07.2 Build 576 version has been used for the R scripts. The land cover classification work was performed in QGIS, v.3.16.11-Hannover. Data were analyzed in both MATLAB and R and plots created with R (R Core Development Team 2020) in RStudio®.

Description: The data provided here is an exemplary dataset for the flux site Zarnekow from one year (2018). The complete dataset that is needed to run the codes for all the years can be obtained from the European Fluxes Database Cluster under site ID DE-Zrk (Sachs et al., 2016) or provided upon request. This repository is intended to provide the necessary MATLAB and R code to reproduce the results by Kalhori et al. (2024). The data are provided as zip folder containing (1) a csv file with associated definition of variables and units (file: 2023-004_Kalhori-et-al_README_2018_units.txt), (2) a shapefile (file: 2023-004_Kalhori-et-al_2018_LAiV_DOP.shp) and (3) a Geotiff (file: 2023-004_Kalhori-et-al_2018_LAiV_DOP.tiff).

Description: In near-Earth space, a large population of high-energy electrons are trapped by Earth’s magnetic field. These energetic electrons are trapped in the regions called Earth’s ring current and radiation belts. They are very dynamic and show a very strong dependence on solar wind and geomagnetic conditions. These energetic electrons can be dangerous to satellites in the near-Earth space. Therefore, it is very important to understand the mechanisms which drive the dynamics of these energetic electrons. Wave-particle interaction is one of the most important mechanisms. Among the waves that can be encountered by the energetic electrons when they move around our Earth, whistler mode chorus waves can cause both acceleration and the loss of energetic electrons in the Earth's radiation belts and ring current. Using more than 5 years of wave measurements from NASA’s Van Allen Probe mission, Wang et al (2019) developed chorus wave models which depend on magnetic local time (MLT), Magnetic Latitude (MLat), L-shell, and geomagnetic condition index Kp. To quantify the effect of chorus waves on energetic electrons, we calculated the bounce-averaged quasi-linear diffusion coefficients using the chorus wave model developed by Wang et al (2019) and extended to higher latitudes according to Wang and Shprits (2019). Using these diffusion coefficients, we calculated the lifetime of the electrons with an energy range from 1 keV to 2 MeV. In each MLT, we calculate the lifetime for each energy and L-shell using two different methods according to Shprits et al (2007) and Albert and Shprits (2009). We make the calculated electron lifetime database available here. Please notice that the chorus wave model by Wang et al (2019) is valid when Kp 〈= 6. If the user wants to use this lifetime database for Kp 〉6, please be careful and contact the authors.

Description: The META-WT project was designed to perform a 4-weeks seismic experiment in Germany with a dense seismic array of ~400 three-component geophones that covered (1) a 2.5km x 2.5km wind farm area in Brandenburg, Germany, with almost 200 wind turbines (WTs) and a well-studied subsurface structure and (2) a 20-km long radial line from the center of the wind farm with one geophone every half-kilometer. The objective was to capture the spatio-temporal seismic wave-field signature of the wind farm from continuous recordings of ambient noise. Due to the dense interstation distance and proposed geometry the experiment allowed for analyzing both small-scale wave field characteristics at an unprecedented spatial resolution and the longer distance radiation pattern of the wind farm. Waveform data is available from the GEOFON data centre, under network code XF, and is embargoed until Jan 2025.

Description: This data set contains the results from a 2023 GFZ Innovative Research Expedition project to explore for natural hydrogen gas (H2) occurrences in the NW Pyrenean foreland, near the town of Biarritz in France. The data represent in-situ measurements of soil and spring water gas, as well as in-situ spring water property measurements, complemented with laboratory analysis results of gas contents and noble gas isotopic compositions of gas and spring water samples collected during the expedition. This GFZ Innovative Research Expedition was inspired by previous exploration efforts in the region by Lefeuvre et al. (2021, 2022). These authors detected elevated concentrations of natural H2 gas in the soil and interpreted this natural H2 to be derived from serpentinizing mantle rocks below the Pyrenees. The main aims of this expedition were the following: (1) in-situ measuring soil gas contents and taking soil gas samples for laboratory analysis at a site near the town of Peyrehorade in the NW of the general study area of Lefeuvre et al. (2021), thus improving the soil gas data coverage along the NW end of the North Pyrenean Frontal Thrust (NPFT); (2) taking gas samples from degassing springs (or water samples from non-degassing springs to be degassed in the lab) in the general Lefeuvre et al. (2021) study area for additional laboratory analysis of gas contents and noble gas isotopic compositions, which may be indicative of (deep) gas origins; and (3) performing a detailed soil gas analysis by means of a portable mass spectrometer at Sauveterre-de-Béarn, a site along the NPFT where Lefeuvre et al. (2022) measured elevated concentrations of natural H2 in the soil. Furthermore, we also measured the properties of the visited springs (temperature, pH, conductivity) while on site, and performed additional in-situ soil gas measurements from manual drillholes. Details on the measurement and sampling methods, on the laboratory analyses, as well as the results of these measurements and analyses are provided in the data description file The expedition involved six field days in July 2023, during which a total of 26 sites were visited. These sites were selected for their vicinity near a major geological contact or fault zone that could have facilitated upward circulation of gas or (thermal) water from the (deep) subsurface (i.e., potentially from the mantle).

Description: Within the Inter-Wind project we study wind turbine (WT) emissions with ground motion and acoustic measurements which are accompanied by the acquisition of meteorological parameters as well as psychological surveys of residents living in the vicinity of the wind farms. Measurements are conducted on the Swabian Alb in Southern Germany at wind farms Tegelberg and Lauterstein in multiple interdisciplinary campaigns. Here we focus on measurements with line and ring layouts which are directed at improving the prediction of ground-motion emissions of WTs. This dataset contains recorder log files. Seismic data is stored at GEOFON, network 4C (2020 - 2024, Ritter and Gaßner 2022).

Description: The Gt BTrKoe 1/2021 borehole was drilled in the framework of a research project called GeoFern, funded by the German Ministry for Economic Affairs and Climate Action under the grant number 03EE4007. The overall objective of this research project was to support the development of the geothermal heat utilization for urban areas. Therefore, the integration of reservoir utilization concepts into heat supply systems need to be studied. The GeoFern project aimed to contribute to the knowledge on geological structure and the lithological composition of the subsurface to minimize the explorational risks for future site developments in SE Berlin, Germany. It focused on the exploration of possible Mesozoic aquifers, suitable for aquifer thermal energy storage (ATES) in depths of up to 500 m. As stopping criteria for drilling, the presence of terrestrial (arid) clayey Keuper sediments of the Exter Formation (Upper German Triassic) were defined. In this data publication we provide the results of the investigations and measurements conducted on site in the field laboratory as well as the open-hole geophysical well-logging data of the Gt BTrKoe 1/2021 borehole acquired by a commercial contractor. In addition, a temperature log of the borehole, measured by the GFZ about two months after the end of drilling activities, is part of this data publication. The drilling of the Gt BTrKoe 1/2021 borehole started at the 15th of November 2021 with the setting of the conductor pipe and reached its final depth of 456 m in Triassic sediments on the 19th of December 2021. The drilling was conducted in two main sections using two different technologies. For the upper section, covering Cenozoic sediments and reaching a depth of 211 m, reverse drilling technology was used. This section comprises the Quaternary to Tertiary groundwater system and the Tertiary “Rupelton” (Oligocene, Rupelian). The latter represents an about 100 m thick clayey succession that do act as a regional aquitard, separating the deeper saline groundwater systems from the upper utilized (freshwater) groundwater levels. After setting and cementing of the casing, the borehole was further deepened by using conventional Rotary drilling technology. Due to the lack of knowledge on the geological situation of the pre-Cenozoic strata before the drilling, this section represents the most relevant part for answering the research goals of the project. In order to allow the most accurate description and characterization of the drilled strata, this section was completely cored using wireline coring equipment with 3-m core barrels. In total, 90 core runs were conducted and 197.4 m of cores retrieved, showing a core recovery factor of 81%. The core show a mean core diameter of about 100 mm. The drilling was stopped after encountering the multicolored terrestrial playa sediments of the Upper Triassic in the last core run. While the token cutting samples were not assigned with International Generic Sample Numbers (IGSN), the borehole (Norden, 2022) and all taken cores were registered with IGSNs.

Description: This data set is a description of a novel analogue modelling method used to run lithospheric-scale tectonic models, and to uniquely monitor these models through X-Ray CT-scanning techniques at the Tectonic Modelling Lab of the University of Bern (Switzerland). It includes information on the model set-up and model materials, and includes a step-by-step description of the general modelling procedure. A first application of this novel procedure, for the simulation of lithospheric scale rifting processes can be found in Zwaan & Schreurs (2023a) in Tectonics, with supplementary data publicly available via GFZ Data Services (Zwaan & Schreurs 2023b). The results of this work prove the feasibility of the method, and opens the door to a broad variety of new tectonic modelling studies

Description: This dataset provides friction data from drained ring-shear tests on a wet (water saturated) silica powder-glass beads-PVC powder mixture (40:40:20 wt.%) “CM2”, used in analogue modelling of tectonic and erosion processes as a rock analogue for the earth’s upper crust (e.g. Conrad et al., 2023, Reitano et al., 2020, 2022. 2023). According to our analysis the materials show a Mohr-Coulomb behaviour characterized by a linear failure envelope. Peak, dynamic and reactivation friction coefficients of CM2 are µP = 0.66, µD = 0.58, and µR = 0.61, respectively. Cohesion of the material ranges between 60-230 Pa. The tested bulk material CM2 consists of a mixture of 40 wt. % silica powder, 40 wt.% glass beads and 20 wt.% PVC powder which has been saturated with water (Table 1). Specification of silica powder is “Ventilated Quartz VR16” (https://www.valligranulati.it/products-granules-quartz-marble-sands-premixed/sheet-m/ventilated-quartz) by the company Valli Granulati S.r.l. (Italy). Ventilated quartz is obtained by micronisation of quartz sands with a high content of SiO2 (around 96%), and used e.g. in paints and abrasives. It should be handled with care to omit generation of dust and a half mask (filter class FFA1P2 RD) should be worn because it can harm the human respiratory tract with the potential of causing silicosis. Glass beads used here have a size (diameter) of 700-110 µm and their individual properties are described in detail Pohlenz et al. (2020). The commercial name for the PVC powder is “PVC K.57 Inovyn 257RF” by the company TPV Compound (Italy). PVC powder is mainly used for cleaning industrial structures (as abrasives) or for the production of PVC tubing, plastic sheets etc. The composition of this PVC powder is the same of the common Polyvinyl chloride. According to the regulation CE n.1272/2008 (CLP), this type of PVC powder is classified as not dangerous for the supply, also thanks to its low value of density and round shape.