ALBERT

Beschreibung: Recent studies pointed to a high ice nucleating activity (INA) in the Arctic sea surface microlayer (SML). However, related chemical information is still sparse. In the present study, INA and free glucose concentrations were quantified in Arctic SML and bulk water samples from the marginal ice zone, the ice-free ocean, melt ponds, and open waters within the ice pack. T50 (defining INA) ranged from −17.4 to −26.8 °C. Glucose concentrations varied from 0.6 to 51 μg/L with highest values in the SML from the marginal ice zone and melt ponds (median 16.3 and 13.5 μg/L) and lower values in the SML from the ice pack and the ice-free ocean (median 3.9 and 4.0 μg/L). Enrichment factors between the SML and the bulk ranged from 0.4 to 17. A positive correlation was observed between free glucose concentration and INA in Arctic water samples (T50(°C) = (−25.6 ± 0.6) + (0.15 ± 0.04)·Glucose(μg/L), RP = 0.66, n = 74). Clustering water samples based on phytoplankton pigment composition resulted in robust but different correlations within the four clusters (RP between 0.67 and 0.96), indicating a strong link to phytoplankton-related processes. Since glucose did not show significant INA itself, free glucose may serve as a potential tracer for INA in Arctic water samples.

Beschreibung: Investigating the biogeochemistry of dissolved organic matter (DOM) requires the synthesis of data from several complementary analytical techniques. The traditional approach to data synthesis is to search for correlations between measurements made on the same sample using different instruments. In contrast, data fusion simultaneously decomposes data from multiple instruments into the underlying shared and unshared components. Here, Advanced Coupled Matrix and Tensor Factorization (ACMTF) was used to identify the molecular fingerprint of DOM fluorescence fractions in Arctic fjords. ACMTF explained 99.84% of the variability with six fully shared components. Individual molecular formulas were linked to multiple fluorescence components and vice versa. Molecular fingerprints differed in diversity and oceanographic patterns, suggesting a link to the biogeochemical sources and diagenetic state of DOM. The fingerprints obtained through ACMTF were more specific compared to traditional correlation analysis and yielded greater compositional insight. Multivariate data fusion aligns extremely complex, heterogeneous DOM data sets and thus facilitates a more holistic understanding of DOM biogeochemistry.

Beschreibung: There was a typographical error in [1, eq. (18)]. Instead of (Formula Presented). The equation describes the second-order statistics of the interferometric phases. Its significance lies in the fact that from it, one can derive the statistical properties of a wide range of quantities estimated from an interferometric stack, including the closure phases that we addressed in the paper. The other equations, numerical results, and the conclusions remain unaffected, because the error was of a purely typographical nature.

Beschreibung: Biochemistry DOI: 10.1021/acs.biochem.5b00313

Beschreibung: Postdisaster search and rescue is an important application of ultrawideband (UWB) radar systems, which mainly detect trapped victims by their respiratory-motion response. The development of a respiratory-motion detection (RMD) algorithm that can eliminate nonstationary clutter and noise is a challenging task for the application. A new algorithm is proposed to deal with the task in this letter. It uses the multichannel singular spectrum analysis (MSSA) technique to reconstruct the respiratory-motion response detected by a UWB radar. During the reconstruction, the periodicity and range interrelation characteristics of the response are exploited to adaptively identify signal subspaces. The performance of the algorithm is verified both by simulated and real data. The results show its improved performance over the reference algorithms, e.g., a singular-value-decomposition-based algorithm. The adaptive-MSSA-based RMD algorithm has great promise not only in practical use but also for future research of UWB-radar-based human being remote sensing.

Beschreibung: Land–sea contamination observed in Soil Moisture and Ocean Salinity (SMOS) brightness temperature images is found to have two main contributions: the floor error inherent of image reconstruction and a multiplicative error either in the antenna temperature or in the visibility samples measured by the correlator. The origin of this last one is traced down to SMOS calibration parameters to yield a simple correction scheme, which is validated against several geophysical scenarios. Autoconsistency rules in interferometric synthesis together with redundant and complementary calibration procedures provide a robust SMOS calibration scheme.

Beschreibung: This letter proposes a novel algorithm, which is based on the generalized method of moments (GMM), for the estimation and correction of phase errors induced in synthetic aperture radar (SAR) imagery. The GMM algorithm is used to replace the original phase-estimation kernel in the basic structure of the phase-gradient-autofocus algorithm. Since this novel algorithm does not require the observed signal to be a certain distribution model, it is able to estimate arbitrary phase errors. The GMM algorithm has the ability of estimating range-dependent phase errors, which makes it an efficient estimator. As a result, higher accuracy of the estimated phase errors and a better focused image can be achieved. Excellent results have been obtained in autofocusing and imaging experiments on real SAR data.

Beschreibung: Strong clutter reflections of terrain and marine surfaces obscure the contrast between the target-of-interest and clutter (terrain and marine surface reflections) in synthetic aperture radar (SAR) images and consequently hinder the efficiency of image interpretation and analysis. To overcome this problem, this letter proposes an efficient clutter suppression method in SAR images, which is named shedding irrelevant patterns (SIP). The essence is to construct a regression function that can suppress clutter and preserve the target patterns concurrently. We assume that the clutter is irrelevant to the target-of-interest and distinguishable in patterns in terms of image-pixel distribution and intensity (spatial information). Experimental results show the efficiency of the proposed method in both clutter suppression and target pattern preservation.

Beschreibung: A concern in hyperspectral image classification is the high number of required training samples. When traditional classifiers are applied, feature reduction (FR) techniques are the most common approaches to deal with this problem. Subspace-based classifiers, which are developed based on high-dimensional space characteristics, are another way to handle the high dimension of hyperspectral images. In this letter, a novel subspace-based classification approach is proposed and compared with basic and improved subspace-based classifiers. The proposed classifier is also compared with traditional classifiers that are accompanied by an FR technique and the well-known support vector machine classifier. Experimental results prove the efficiency of the proposed method, especially when a limited number of training samples are available. Furthermore, the proposed method has a very high level of automation and simplicity, as it has no parameters to be set.

Beschreibung: To improve the spatial density of measurement points of persistent-scatterer interferometry, distributed scatterer (DS) should be considered and processed. An important procedure in DS interferometry is the phase triangulation (PT). This letter introduces two modified PT algorithms (i.e., equal-weighted PT and coherence-weighted PT) and analyzes the mathematical relations between different published PT methods (i.e., the maximum-likelihood phase estimator, least squares estimator, and eigendecomposition-based phase estimators). The analysis shows that the above five PT methods share very similar mathematical forms with different weight values in the estimation procedure.

Beschreibung: Sparse representation-based classifier and its variants have been widely adopted for hyperspectral image (HSI) classification recently. However, sparse representation is unstable so that similar features might obtain significantly different sparse codes. Despite the instability, we find that the sparse codes follow a class-dependent distribution under the structured dictionary consisting of training samples from all classes. Based on this observation, a novel discriminative feature, sparse code histogram (SCH), is developed for HSI classification. By counting the SCH of each sample from the sparse codes of its spatial neighbors, we can statistically obtain the distribution pattern of sparse codes of the class to which the sample belongs, and then treat the SCH as a new feature for classification. To reduce the possible outliers among the neighbors, a shape-adaptive neighborhood extractor is also employed to enhance the stability of the histogram feature. Experimental results demonstrate that SCH enjoys a strong discriminative power, which can achieve notably better performance than several state-of-the-art methods for HSI classification with limited training samples.

Beschreibung: Several detection statistics have been proposed for detecting fine ground disturbances between two synthetic aperture radar (SAR) images, such as vehicle tracks. The standard method involves estimating a local correlation coefficient between images. Other methods have been proposed using various statistical hypothesis tests. One of these alternative methods is a generalized likelihood ratio test (GLRT), which compares a full-correlation image model to a no-correlation image model. In this letter, we expand the GLRT to polarimetric SAR data and derive the appropriate GLRT detection statistics. Additionally, we explore relaxing the equal variance/equal polarimetric covariance assumptions used in previous results and find improved performance on macroscopic scene changes.

Beschreibung: For downward-looking linear array 3-D synthetic aperture radar, the resolution in cross-track direction is much lower than the ones in range and azimuth. Hence, superresolution reconstruction algorithms are desired. Since the cross-track signal to be reconstructed is sparse in the object domain, compressive sensing algorithm has been used. However, the imaging processing on the 3-D scene brings large computational loads, which renders challenges in both data acquisition and processing. To cover this shortage, truncated singular value decomposition is utilized to reconstruct a reduced-redundancy spatial measurement matrix. The proposed algorithm provides advantages in terms of computational time while maintaining the quality of the scene reconstructions. Moreover, our results on uniform linear array are generally applicable to sparse nonuniform linear array. Superresolution properties and reconstruction accuracies are demonstrated using simulations under the noise and clutter scenarios.

Beschreibung: This letter proposes a signal processing method of passive bistatic radar (PBR) exploiting an uncooperative radar as an illuminator. Compared with other opportunity illuminators, the transmitting signal of a radar usually has a better ambiguity function, which leads to a higher range resolution. Two channels are needed in PBR system. The reference channel is used to estimate radar signal parameters and reconstruct directly propagated signal. The surveillance channel is used to receive scattered wave. An array antenna and a simultaneous multibeam algorithm are necessary in the surveillance channel due to the flexible beam scanning of the uncooperative radar. The procedure of the proposed method is explained in detail, which is then followed by a field experiment. Preliminary results from the field experiment show that the proposed method can be applied to target angle and bistatic range measurement successfully.

Beschreibung: In order to achieve 3-D imaging with an airborne down-looking linear-array synthetic aperture radar (LASAR), a uniform virtual antenna array may be obtained by aperture synthesis of the cross-track sparse multiple-input–multiple-output array. However, the actual 3-D imaging quality is unavoidably degraded by errors in the virtual element position. In this letter, we investigate the effects of these errors on the forms and the degrees of image quality degradation by decomposing the error-related stochastic processes via an orthogonal transform based on discrete Legendre polynomials. It should be noted that these analyses are helpful for designing a LASAR system and providing a reference for specifying the requisite precision of measurement devices and calibration methods. Finally, we briefly consider the use of calibration methods to eliminate the effects of errors.

Beschreibung: In problems where labeled data are scarce, semisupervised learning (SSL) techniques are an attractive framework that can exploit both labeled and unlabeled data. These approaches typically rely on a smoothness assumption such that examples that are similar in input space should also be similar in label space. In many domains, such as remotely sensed hyperspectral image (HSI) classification, the data violate this assumption. In response, we propose a general method by which a neighborhood graph used in SSL is learned using binary classifiers that are trained to predict whether a pair of pixels shares the same label. Working within the framework of semisupervised neural networks (SSNNs), we show that our approach improves on the performance of the SSNN on two HSI data sets.

Beschreibung: In this letter, new models for the spatial correlation of sea clutter texture and intensity are proposed as improved versions of current power law models or exponential decay model. The models for texture have three unknown parameters, and thus can be called triparametric models. The structure of the models is a weighted sum of two components, which can describe the decaying process of the correlation coefficient with spatial lags, as well as the periodic behavior due to the existence of transient coherent structures in sea clutter. Unknown parameters are optimized by the nonlinear least square fit method. Models for sea clutter intensity can be obtained through a linear transform for uncorrelated speckle based on the compound-Gaussian representation of sea clutter. The proposed models are validated and compared with current models using S- and C-band measured sea clutter data. Analysis results indicate the effectiveness of the proposed models in that they can describe the behavior of spatial correlation coefficients with higher accuracy.

Beschreibung: Terrestrial laser scanning (TLS) has become a popular tool for acquiring source data points which can be used to construct digital elevation models (DEMs) for a wide number of applications. A TLS point cloud often has a very fine spatial resolution, which can represent well the spatial variation of a terrain surface. However, the uncertainty in DEMs created from this relatively new type of source data is not well understood, which forms the focus of this letter. TLS survey data representing four terrain surfaces of different characteristics were used to explore the effects of surface complexity and typical TLS data density (in terms of data point spacing) on DEM accuracy. The spatial variation in TLS data can be decomposed into parts corresponding to the signal of spatial variation (of terrain surfaces) and noise due to measurement error. We found a linear relation between the DEM error and the typical TLS data spacings considered (30–100 mm) which arises as a function of the interpolation error, and a constant contribution from the propagated data noise. This letter quantifies these components for each of the four surfaces considered and shows that, for the interpolation method considered here, higher density sampling would not be beneficial.

Beschreibung: A novel way to estimate the live fuel moisture content (LFMC) was explored from the ratio of canopy water content (CWC) and foliage dry biomass (FDB). The CWC was estimated using the PROSAIL (PROSPECT + SAIL) radiative transfer model from the Landsat 8 product. A weak constraint 4-D variational data assimilation method was employed to assimilate the temporally estimated leaf area index into a soil-water-atmosphere-plant (SWAP) model for optimizing the model control variables. Then, the SWAP model was reinitialized with this optimum set of control variables, and better prediction of FDB was obtained. Results showed that a high accuracy level was achieved for the estimated CWC ( $R^{2}=0.91$ , $mbox{RMSE}=84.74 mbox{g/m}^2$ ) and FDB ( $R^2=0.88$ , $mbox{RMSE}=48.54 mbox{g/m} ^2$ ) when compared with in situ measured values. However, the accuracy level of estimated LFMC was poor ( $R^2=0.59$ , $mbox{RMSE} =30.85%$ ) . Further analyses find that the estimated LFMC is reliable for low LFMC but challenged for high LFMC, which indicates that the presented method still makes sense to the assessment of wildfire risk since the wildfire generally occurs when the vegetation is in low LFMC condition.

Beschreibung: In this letter, we present the use of experimental human micro-Doppler signature data gathered by a multistatic radar system to discriminate between unarmed and potentially armed personnel walking along different trajectories. Different ways of extracting suitable features from the spectrograms of the micro-Doppler signatures are discussed, particularly empirical features such as Doppler bandwidth, periodicity, and others, and features extracted from singular value decomposition (SVD) vectors. High classification accuracy of armed versus unarmed personnel (between 90% and 97% depending on the walking trajectory of the people) can be achieved with a single SVD-based feature, in comparison with using four empirical features. The impact on classification performance of different aspect angles and the benefit of combining multistatic information is also evaluated in this letter.

Beschreibung: Automatic urban area detection in remote sensing images is an important application in the field of earth observation. Most of the existing methods employ feature classifiers and thereby contain a data training process. Moreover, some methods cannot detect urban areas in complex scenes accurately. This letter proposes an automatic urban area detection method that uses multiple features that have different resolutions. First, a downsampled low-resolution image is used to segment the candidate area. After the corner points of the urban area are extracted, a weighted Gaussian voting matrix technique is employed to integrate the corner points into the candidate area. Then, the edge features and homogeneous region are extracted by using the original high-resolution image. Using these results as the input, the processes of guided filtering and contrast enhancement can finally detect accurately the urban areas. This method combines multiple features, such as corner, edge, and regional characteristics, to detect the urban areas. The experimental results show that the proposed method has better detection accuracy for urban areas than the existing algorithms.

Beschreibung: In marine sciences, time series are often nonlinear and nonstationary. Adequate and specific methods are needed to analyze such series. In this letter, an application of the empirical mode decomposition method (EMD) associated to the Hilbert spectral analysis (HSA) is presented. Furthermore, EMD-based time-dependent intrinsic correlation (TDIC) analysis is applied to consider the correlation between two nonstationary time series. Four temperature time series obtained from automatic measurements in nearshore waters of the Réunion island are considered, recorded every 10 min from July 2011 to January 2012. The application of the EMD on these series and the estimation of their power spectra using the HSA are illustrated. The authors identify low-frequency tidal waves and display the pattern of correlations at different scales and different locations. By TDIC analysis, it was concluded that the high-frequency modes have small correlation, whereas the trends are perfectly correlated.

Beschreibung: Detecting vehicles in aerial images provides important information for traffic management and urban planning. Detecting the cars in the images is challenging due to the relatively small size of the target objects and the complex background in man-made areas. It is particularly challenging if the goal is near-real-time detection, i.e., within few seconds, on large images without any additional information, e.g., road database and accurate target size. We present a method that can detect the vehicles on a 21-MPixel original frame image without accurate scale information within seconds on a laptop single threaded. In addition to the bounding box of the vehicles, we extract also orientation and type (car/truck) information. First, we apply a fast binary detector using integral channel features in a soft-cascade structure. In the next step, we apply a multiclass classifier on the output of the binary detector, which gives the orientation and type of the vehicles. We evaluate our method on a challenging data set of original aerial images over Munich and a data set captured from an unmanned aerial vehicle (UAV).

Beschreibung: We compare five slope correction methods developed by Walter et al. , Montes et al. , Schleppi et al. , España et al. , and Gonsamo et al. (referred to as WAL, MON, SCH, ESP, and GON, respectively) using artificial fisheye pictures simulated by graphics software and a lookup table (LUT) retrieval method. The LUT is built by simulating the directional gap fraction as a function of leaf area index (LAI) and average leaf inclination angle (ALIA) using the Poisson law. LAI and ALIA estimates correspond to the case of the LUT that provides the lowest root-mean-square error between the observed gap fractions after slope correction and the simulated ones. Three LAI values (1.5, 3.5, and 5.5), four ALIA values (26.8°, 45°, 57.5°, and 63.2°), and three slope angles (0°, 20°, and 50°) constituted 36 samples of random scenes. ESP is recommended because its results are accurate and independent on the leaf angle distribution (LAD), while GON only performs well for spherical LAD. The three other methods present less good performances with underestimation or overestimation of LAI and/or ALIA depending on the LAD, and the recommended order for them is MON, SCH, and WAL.

Beschreibung: In this letter, an improved phase correlation (PC) method based on 2-D plane fitting and the maximum kernel density estimator (MKDE) is proposed, which combines the idea of Stone's method and robust estimator MKDE. The proposed PC method first utilizes a vector filter to minimize the noise errors of the phase angle matrix and then unwraps the filtered phase angle matrix by the use of the minimum cost network flow unwrapping algorithm. Afterward, the unwrapped phase angle matrix is robustly fitted via MKDE, and the slope coefficients of the 2-D plane indicate the subpixel shifts between images. The experiments revealed that the improved method can effectively avoid the impact of outliers on the phase angle matrix during the plane fitting and is robust to aliasing and noise. The matching accuracy can reach 1/50th of a pixel using simulated data. The real image sequence tracking experiment was also undertaken to demonstrate the effectiveness of the proposed PC method with a registration accuracy of root-mean-square error better than 0.1 pixels.

Beschreibung: Accurately mapping forest carbon density by combining sample plots and remotely sensed images has become popular because this method provides spatially explicit estimates. However, mixed pixels often impede the improvement of the estimation. In this letter, regression modeling and spectral unmixing analysis were integrated to improve the estimation of forest carbon density for the You County of Hunan, China, using Landsat Thematic Mapper images. Linear spectral unmixing with and without a constraint (LSUWC and LSUWOC) and nonlinear spectral unmixing (NSU) were compared to derive the fractions of five endmembers, particularly forests. Stepwise regression, logistic regression, and polynomial regression (PR) with and without the forest fraction used as an independent variable and the product of the forest fraction image and the map from the best model without the forest fraction were compared. The models were developed using 56 sample plots, and their results were validated using 26 test plots. The decomposition of mixed pixels was assessed using higher spatial resolution SPOT images and a corresponding land cover map. The results showed that 1) LSUWC more accurately estimated the endmember fractions than LSUWOC and NSU, 2) PR had the greatest estimation accuracy of forest carbon, and 3) combining regression modeling and spectral unmixing increased the estimation accuracy by 31%–39%, and introducing the forest fraction into the regressions performed better than the product of forest fraction image and the results from PR without the fraction. This implied that the integrations provided great potential in reducing the impacts of mixed pixels in mapping forest carbon.

Beschreibung: This letter proposes a multiresolution technique to address the high computational cost in remote sensing image registration. The scale-invariant feature transform is applied to detect keypoints and descriptors, and then, global information combined with descriptors is utilized to establish keypoint mappings. Keypoints are first classified according to their octaves. Then, in the lowest resolution, the keypoints of the largest octave are mapped with descriptors and the global information, giving an initial affine transformation $T_0$ . In the next octave, the keypoints of the second largest octave are mapped by employing $T_0$ to narrow the space of matching keypoints. By this means, the process of establishing keypoint correspondences is conducted from one resolution (octave) to the next as the obtained transformation gets finer until we get to the highest resolution. Due to the high computational expense of computing global information, the proposed technique is important for aligning large-size remote sensing imagery. Experimental results show that the proposed method can achieve a comparable registration accuracy but with a less computational cost than directly building keypoint mappings on images of large size.

Beschreibung: Gold nanorods (GNRs) with surface plasmon resonance peak at 1063.8 nm were fabricated and experimentally exploited as the single and combined saturable absorber (SA) in a $Q$ -switched Nd:YAG laser for the first time. In the situation using GNRs as a single SA, the maximum pulse energy of 19 $muhbox{J} $ was achieved at a pulse repetition rate of 20 kHz. However, due to the small effective modulation depth of the GNRs, microsecond pulses were generated in such a GNRs-based passively $Q$ -switched laser. A novel configuration using GNRs as a combined SA in an acoustooptic $Q$ -switched Nd:YAG laser was proposed. The small nonlinear loss modulation induced by the GNRs played a distinctive role in flexibly manipulating the nanosecond pulse waveforms. Our study demonstrated the feasibility of generating high-energy pulses by singly using GNRs-based SA in all solid-state lasers. Meanwhile, a new application mode incorporating GNRs as a combined SA was studied, providing an alternative method to take advantage of the nanomaterial-based SA with a relatively small modulation depth.

Beschreibung: Presents corrections to the paper, "Estimation of forest biomass from two-level model inversion of single-pass InSAR data" (Soja, M.J., et al.,Trans. Geosci. Remote Sens., vol. 53, no. 9, pp. 5083???5099, Sep. 2015).

Beschreibung: In this letter, we present an efficient parallel implementation of composite kernels in support vector machines (SVMs) for hyperspectral image (HSI) classification. Our implementation makes effective use of commodity graphics processing units (GPUs). Specifically, we port the calculation of composite kernels to GPUs, perform intensive computations based on NVidia's compute unified device architecture, and execute the rest of the operations related with control and small data calculations in the CPU. Our experimental results, conducted using real hyperspectral data sets and NVidia GPU platforms, indicate significant improvements in terms of computational effectiveness, achieving near-real-time performance of spatial–spectral HSI classification for the first time in the literature.

Beschreibung: Compared with airborne laser scanning, terrestrial laser scanning (TLS) offers ground-based point cloud data of trees and provides greater potential to accurately estimate tree and stand parameters. However, there is a lack of effective methods to accurately identify locations of individual trees from TLS point cloud data. It is also unknown whether the estimation accuracy of the parameters, including tree height (H), diameter at breast height (DBH), and so on, using TLS can meet the requirement of forest management and planning. In this letter, a novel method to effectively process point cloud data and further determine the locations of individual trees in a stand based on the central coordinates of point cloud data on a defined grid according to the largest DBH was developed. Moreover, a point-cloud-data-based convex hull algorithm and the cylinder method were, respectively, used to estimate DBH and H of individual trees. This study was conducted in a pure Chinese fir plantation of 45 trees located in Huang-Feng-Qiao forest farm, You County of Hunan, China. The comparison of the estimated and observed values showed that the obtained tree locations had errors of less than 20 cm, and the relative root mean square errors for the estimates of both DBH and H were less than 5%. This implies that TLS is very promising for the retrieval of tree and stand parameters in forest stands. For the applications of these methods to mixed forests with a structure of multilayer canopies, further examination is needed.

Beschreibung: Commercial, industrial, and military aerospace designs are increasingly deploying MEMS micro inertial measurement unit (MIMU) for motion control, automation, and positioning applications, such as the unmanned aerial vehicle (UAV), robot, and smart phone. On the one hand, MIMU has the merit of low cost, small size, low-power consumption, and high shock resistance, but on the other hand, low-cost MIMU is affected by systematic error caused by the instability of the drift, scaling factors, and axes misalignment, which may lead to large errors in the position and attitude’s determination from time to time. That means calibration before use is an effective way to improve the practical precision of MIMU. However, many customers have no precise turntable to calibrate the MIMU before they use it. To address these problems, this paper presents an easy self-calibration method to implement calibration of the MIMU on a common table only with an inclined surface, no precise turntable is needed. The calibration method is based on the following principles. First, the module of the output vector of the orthogonal configured three-axis accelerometers is equal to unit gravity. Second, when IMU rotates to a known gesture with a stable axis, the angles can be calculated through integration. Third, when the accelerometers’ parameters are calculated, it can act as a level datum. Furthermore, the accelerometers on the inclined surface are used to determine the rotating heading datum. Finally, after a series static positions test and rotating test, the parameters can be extracted and estimated. To demonstrate the success and the convenience of the proposed method, comparison experiments with the precision turntable have been made on an ADI’s MIMU. The calibration results show that the accuracy and precision of this method is quite equivalent with the turntable-based calibration, and the scale factors error with an order of magnitude always equal or less than $10^{-5}$ . The observed static and dynamic yaw maximum angular error in a certain period is <0.8°, the pitch maximum angular error is <0.5°, and the roll maximum angular error is <0.3°.

Beschreibung: Time–frequency packing (TFP) transmission provides the highest achievable spectral efficiency with a constrained symbol alphabet and detector complexity. In this paper, the application of the TFP technique to fiber-optic systems is investigated and experimentally demonstrated. The main theoretical aspects, design guidelines, and implementation issues are discussed, focusing on those aspects which are peculiar to TFP systems. In particular, adaptive compensation of propagation impairments, matched filtering, and maximum a posteriori probability detection are obtained by a combination of a two-dimensional equalizer and four eight-state parallel Bahl–Cocke–Jelinek–Raviv (BCJR) detectors. A novel algorithm that ensures adaptive equalization, channel estimation, and a proper distribution of tasks between the equalizer and BCJR detectors is proposed. A set of irregular low-density parity-check codes with different rates is designed to operate at low error rates and approach the spectral efficiency limit achievable by TFP at different signal-to-noise ratios. An experimental demonstration of the designed system is finally provided with five dual-polarization QPSK-modulated optical carriers, densely packed in a 100-GHz bandwidth, employing a recirculating loop to test the performance of the system at different transmission distances.

Beschreibung: We investigated nonlinear optical characteristics of Tungsten disulfide (WS 2 ) films and experimentally demonstrated their high potential for application as nonlinear saturable absorbers in passively mode-locked fiber lasers. Side polished fiber (SPF) was fabricated and WS 2 film was overlaid to provide an efficient evanescent field interaction. The WS 2 film was prepared using two methods: liquid phase exfoliation to form few-layer nano-sheets, and chemical vapor deposition (CVD) to grow uniform multilayer WS 2 on a SiO 2 substrate. Two SPF saturable absorbers were prepared by either spin coating WS 2 solution or lifting off the multilayer CVD WS 2 on SPF. An all-fiber ring cavity was built and the WS 2 film overlaid on SPF was employed as a mode locker along with Er-doped fiber as a gain medium. Using the spin-coated WS 2 SPF, stable soliton-like pulses were generated with a spectral width of 5.6 nm and 467 fs pulse duration. The fiber laser cavity containing CVD WS2 SPF generated a transform-limited soliton pulse train with a spectral width of 8.23 nm and a pulse duration of 332 fs. Our study confirmed a high potential of WS 2 film as a novel 2-D nonlinear optical material for laser applications.

Beschreibung: We propose and experimentally demonstrate an on-chip all-optical differential-equation solver capable of solving second-order ordinary differential equations (ODEs) characterizing continuous-time linear time-invariant systems. The photonic device is implemented by a self-coupled microresonator on a silicon-on-insulator platform with mutual coupling between the cavity modes. Owing to the mutual mode coupling within the same resonant cavity, the resonance wavelengths induced by different cavity modes are self-aligned, thus avoiding precise wavelength alignment and unequal thermal wavelength drifts as in the case of cascaded resonators. By changing the mutual mode coupling strength, the proposed device can be used to solve second-order ODEs with tunable coefficients. System demonstration using the fabricated device is carried out for 10-Gb/s optical Gaussian and super-Gaussian input pulses. The experimental results are in good agreement with theoretical predictions of the solutions, which verify the feasibility of the fabricated device as a tunable second-order photonic ODE solver.

Beschreibung: We demonstrate a 100 Gb/s short reach system using a multicarrier transmitter based on a gain switched monolithically integrated laser. An optical comb source with 12.5-GHz free spectral range is achieved by gain-switching an integrated passive feedback laser. The 100 Gb/s wavelength division multiplexed, single sideband, direct detection, orthogonal frequency division multiplexed (WDM-SSB-DD-OFDM) system operates over 25 km standard single mode fiber exhibiting a spectral efficiency of 1.8 b/s/Hz. Receiver sensitivity of –14.2 dBm is achieved after 25 km transmission. Performance optimization with phase and amplitude precompensation is employed to improve the SSB OFDM modulation thereby reducing the interchannel interference and overcoming the power fading induced by the optical filter. We also present a theoretical analysis of the SSB-OFDM modulation.

Beschreibung: In this paper, narrow-band emission lines are generated by means of two random distributed feedback fiber laser schemes. Spectral line-widths as narrow as 3.2 pm have been measured, which significantly improves previous reported results. The laser is analyzed with the aim of obtaining a spectral line-width as narrow as possible. Additionally a variation of this setup for multi-wavelength operation is also validated. Both schemes present a simple topology that use a combination of phase-shifted fiber Bragg gratings and regular fiber Bragg gratings as filtering elements.

Beschreibung: We report on the fabrication and characterization of 19-cell hypocycloid-shape Kagome fibers with core size larger than 100 μm. These inhibited coupling fibers present low propagation loss (100 dB/km) over broad transmission range with low chromatic dispersion combined with ultra-low power overlap with silica surround, making them an efficient solution for ultra-high power laser handling, ultra-fast laser delivery, and plasma photonics applications.

Beschreibung: The iterative demodulation and decoding algorithm introduced in 2005 by Colavolpe, Barbieri, and Caire to cope with channels affected by phase noise needs pilot symbols to bootstrap. However, pilot symbols reduce the spectral efficiency of the system and, consequently, system's throughput. The aim of this paper is to show that trellis-based demodulation can be used to bootstrap the iterative process without the need of pilot symbols. Also, the complexity issue of trellis-based demodulation is addressed in this paper. The result is that the performance of iterative demodulation and decoding after the iterations is virtually unaffected by complexity reduction, provided that the reduced-complexity demodulator guarantees cycle-slip-free operation. From the numerical results presented in this paper, we show that cycle-slip-free operation can be achieved with substantial complexity reduction also for phase noise associated with linewidths of practical interest.

Beschreibung: The optical pulse evolution in a highly nonlinear normal dispersion-increasing fiber has been considered, both experimentally and theoretically. It was found that large spectral broadening in tapered waveguides could occur without temporal instabilities and impose the linear frequency modulation, i.e., chirp, required for high-quality pulse compression. The pedestal-free pulses have been demonstrated after dechirping in a standard single-mode fiber.

Beschreibung: This work proposes a novel localized surface plasmon resonance (LSPR) biochemical sensor featuring high sensitivity and a high resolution. The sensor was divided into two subcomponents according to their distinct functions; namely, single-mode fiber and metal array. Single-mode fibers located on the left and right sides of the sensors function as the input and output for optical fiber signals. A metal array comprising an arrangement of cylindrical nanometal particles served as the detection area of the sensor. To effectively reduce the memory capacity and calculation time, two innovative techniques (i.e., object meshing and boundary meshing) were integrated with the finite element method. With the area of the triangular elements used as a basis, the object boundary, small object, medium object, and large objects were meshed at a ratio of 1:8:160:1600. The improved numerical simulation methods and six design procedures were adopted to develop and analyze the proposed LSPR biochemical sensor. The results show that the novel LSPR biochemical sensor outperformed two current high-performance biochemical sensors and provided additional advantages such as short length (approximately 430 μm), high resolution (approximately –120 dB), and high sensitivity (approximately 127 604 nm/RIU).

Beschreibung: We propose an ultra-broadband super light absorber by integrating different-sized tapered hyperbolic metamaterial (HMM) waveguides, each of which has a different and wide absorption band due to broadband slow-light response, into a unit cell. We numerically demonstrate that such an absorber is superior to a single-sized HMM absorber in terms of absorption bandwidth, while maintaining a comparable absorption efficiency. A three different-sized HMM absorber presents the capability of working with an ultra-wide frequency band ranging from 1 to 30 THz, which is much larger than previously proposed absorbers working in the same spectral region. Such a design shows great promise for a broad range of applications such as thermal emitters, photovoltaics, optical-chemical energy harvesting, and stealth technology, where ultra-wideband absorption is in very high demand.

Beschreibung: This paper proposes a ring-based integrated wireless optical network architecture and an associated protocol that involves Ethernet passive optical network (EPON) and long term evolution (LTE) wireless network. The architecture along with the proposed protocol is instrumental toward the reduction of handover delay. The proposed ring-based EPON architecture facilitates the implementation of the X2 interface for LTE network by enabling the optical network units of the EPON backhaul to directly communicate with each other. The work further discusses about an open access network architecture where a single EPON can be used by multiple mobile service providers without compromising information security. Extensive simulations have been carried out to evaluate the performance of the proposed network. An analytical model has been introduced to calculate the queuing delay experienced by the X2 interface. The model has been validated with the simulations results.

Beschreibung: High spectrum efficiency and fast restoration speed are highly desired for survivable elastic optical networks (EONs). In this paper, we take the advantages of failure-independent path-protecting preconfigured cycles (FIPP p -cycles) and investigate how to realize spectrum efficient resilience design with them. We first study the problem of offline service provisioning with FIPP p -cycles. We formulate an integer linear programming model and prove that the problem is $mathcal{NP}$ hard. Then, several time-efficient heuristics are designed for FIPP p -cycle formulation and related routing, modulation format, and spectrum assignment. Extensive simulations on offline provisioning verify that the heuristics can obtain near-optimal solutions. Next, we consider online service provisioning with FIPP p -cycles in dynamic EONs. In order to overcome the decrease of protection efficiency during dynamic network operation, we propose a p -cycle reconfiguration scheme to reoptimize protection structures on-the-fly. Simulation results demonstrate that the proposed algorithms can improve spectrum efficiency and reduce bandwidth blocking probability simultaneously.

Beschreibung: Photo-thermo-refractive (PTR) glasses are the class of polyfunctional materials that combine the properties of several monofunctional materials such as photo-refractive, laser, luminescent, and plasmonic ones. Based on PTR glasses, various diffractive holographic elements and photonic devices were developed in both the volume and fiber versions. In this paper, the fabrication of optical planar waveguides on PTR glass by low-temperature ion exchange is reported for the first time. Planar waveguides were fabricated through substituting the sodium ions in glass by silver, potassium, rubidium, and cesium ones from the nitrate melts. The silver waveguides were shown to have the largest depth (27 μm) and reveal no birefringence. For the silver waveguides, an increase in the refractive index is caused by differences in the polarizabilities of cations exchanged. The maximum increment of the refractive index was observed in the cesium waveguides (0.0512). An increase in the refractive index and also appearing the birefringence in potassium, rubidium, and cesium waveguides are found to be due to the compressive mechanical stresses and their relaxation. The potentialities of the ion exchange technology for fabricating, in PTR glasses, planar gradient waveguides with low losses (0.5 dB/cm) are demonstrated, the potentialities extending the application field of PTR glasses in photonics.

Beschreibung: Journal of Chemical & Engineering Data DOI: 10.1021/acs.jced.5b00398

Beschreibung: Journal of Chemical & Engineering Data DOI: 10.1021/acs.jced.5b00593

Beschreibung: The Journal of Organic Chemistry DOI: 10.1021/acs.joc.5b00940

Beschreibung: The Journal of Organic Chemistry DOI: 10.1021/acs.joc.5b01304

Beschreibung: The Journal of Physical Chemistry B DOI: 10.1021/acs.jpcb.5b05831

Beschreibung: The Journal of Physical Chemistry B DOI: 10.1021/acs.jpcb.5b05645

Beschreibung: The Journal of Physical Chemistry B DOI: 10.1021/acs.jpcb.5b04144

Beschreibung: The Journal of Physical Chemistry B DOI: 10.1021/acs.jpcb.5b04172

Beschreibung: The Journal of Physical Chemistry B DOI: 10.1021/acs.jpcb.5b07078

Beschreibung: The Journal of Physical Chemistry B DOI: 10.1021/acs.jpcb.5b05557

Beschreibung: The Journal of Physical Chemistry B DOI: 10.1021/acs.jpcb.5b04553

Beschreibung: Journal of Proteome Research DOI: 10.1021/acs.jproteome.5b00416

Beschreibung: Journal of Proteome Research DOI: 10.1021/acs.jproteome.5b00333

Beschreibung: Journal of Proteome Research DOI: 10.1021/acs.jproteome.5b00432

Beschreibung: Journal of Proteome Research DOI: 10.1021/acs.jproteome.5b00329

Beschreibung: Journal of Proteome Research DOI: 10.1021/acs.jproteome.5b00440

Beschreibung: Journal of the American Chemical Society DOI: 10.1021/jacs.5b06982

Beschreibung: Journal of the American Chemical Society DOI: 10.1021/jacs.5b04413

Beschreibung: Journal of the American Chemical Society DOI: 10.1021/jacs.5b05854

Beschreibung: Journal of the American Chemical Society DOI: 10.1021/jacs.5b05482

Beschreibung: Journal of the American Chemical Society DOI: 10.1021/jacs.5b04344

Beschreibung: Journal of the American Chemical Society DOI: 10.1021/jacs.5b05952

Beschreibung: Journal of the American Chemical Society DOI: 10.1021/jacs.5b06480

Beschreibung: Journal of the American Chemical Society DOI: 10.1021/jacs.5b06710

Beschreibung: Journal of the American Chemical Society DOI: 10.1021/jacs.5b05600

Beschreibung: Journal of the American Chemical Society DOI: 10.1021/jacs.5b04086

Beschreibung: Journal of the American Chemical Society DOI: 10.1021/jacs.5b06794

Beschreibung: Journal of the American Chemical Society DOI: 10.1021/jacs.5b06546

Beschreibung: Analytical Chemistry DOI: 10.1021/acs.analchem.5b02043

Beschreibung: Journal of the American Chemical Society DOI: 10.1021/jacs.5b06687

Beschreibung: Environmental Science & Technology DOI: 10.1021/acs.est.5b00385

Beschreibung: In this letter, a novel algorithm for attitude measurement based on a 3-D electromagnetic model (3-D em-model) is proposed. The 3-D em-model is established offline based on the geometric structure of the target, and it can be used to predict the scattering features at different target attitudes. In order to measure the attitude of the air target, we design a bistatic step frequency radar system. The directions of the two radars' lines of sight (LOSs) relative to the target are acquired by matching the high-resolution range profiles (HRRPs) from the target echoes to the HRRPs generated from the 3-D em-model. Since the directions of two radars' LOSs relative to the Earth are already known, the absolute attitude of the target can be acquired. The innovative contributions of this letter are as follows: 1) A comprehensive theoretical analysis of air target attitude measurement based on its own 3-D em-model is proposed; 2) the method can be applied to different kinds of air targets such as aircraft, satellite, missile, etc.; 3) the proposed attitude measurement method does not require target motion model in advance; and 4) the proposed algorithm can be applied to any kind of step frequency waveforms. Experiments using both data predicted by a high-frequency electromagnetic code and data measured in the chamber verify the validity of the method.

Beschreibung: The Soil Moisture and Ocean Salinity (SMOS) and Soil Moisture Active Passive (SMAP) missions provide Level-1 brightness temperature (Tb) observations that are used for global soil moisture estimation. However, the nature of these Tb data differs: the SMOS Tb observations contain atmospheric and select reflected extraterrestrial (“Sky”) radiation, whereas the SMAP Tb data are corrected for these contributions, using auxiliary near-surface information. Furthermore, the SMOS Tb observations are multiangular, whereas the SMAP Tb is measured at 40° incidence angle only. This letter discusses how SMOS Tb, SMAP Tb, and radiative transfer modeling components can be aligned in order to enable a seamless exchange of SMOS and SMAP Tb data in soil moisture retrieval and assimilation systems. The aggregated contribution of the atmospheric and reflected Sky radiation is, on average, about 1 K for horizontally polarized Tb and 0.5 K for vertically polarized Tb at 40° incidence angle, but local and short-term values regularly exceed 5 K.

Beschreibung: A multi-sensor addressing method for fiber Bragg grating aided fiber loop ringdown (FBG-FLRD) sensor array is proposed. It is capable of simultaneous measurement of temperature and force. Light from a wavelength-swept fiber laser (WSFL) is modulated into pulsed light to illuminate FBG-FLRD sensor array. Based on the time sequence of pulsed lights reflected by fiber Bragg grating array, each FBG-FLRD sensor can be distinguished. The time interval between the trigger signal of the WSFL and the pulsed light reflected by FBG offers temperature variation information. By measuring the ringdown time of each FBG-FLRD, the loss of fiber ring induced by temperature and force can be obtained. And then simultaneous measurement can be implemented in real time. To prove the validity of the proposed system, a six elements array is experimentally validated with interrogation frequency of 27.5 Hz.

Beschreibung: ACS Sustainable Chemistry & Engineering DOI: 10.1021/acssuschemeng.5b00580

Beschreibung: ACS Sustainable Chemistry & Engineering DOI: 10.1021/acssuschemeng.5b00538

Beschreibung: Analytical Chemistry DOI: 10.1021/acs.analchem.5b02230

Beschreibung: Analytical Chemistry DOI: 10.1021/acs.analchem.5b01969

Beschreibung: Analytical Chemistry DOI: 10.1021/acs.analchem.5b02385

Beschreibung: Analytical Chemistry DOI: 10.1021/acs.analchem.5b02337

Beschreibung: Analytical Chemistry DOI: 10.1021/acs.analchem.5b01701

Beschreibung: Analytical Chemistry DOI: 10.1021/acs.analchem.5b01895

Beschreibung: Analytical Chemistry DOI: 10.1021/acs.analchem.5b01943

Beschreibung: Analytical Chemistry DOI: 10.1021/acs.analchem.5b02384

Beschreibung: The Journal of Organic Chemistry DOI: 10.1021/acs.joc.5b01343

Beschreibung: The Journal of Organic Chemistry DOI: 10.1021/acs.joc.5b01204

Beschreibung: The Journal of Physical Chemistry B DOI: 10.1021/acs.jpcb.5b07365

Beschreibung: The Journal of Physical Chemistry B DOI: 10.1021/acs.jpcb.5b02459

Beschreibung: The Journal of Physical Chemistry B DOI: 10.1021/acs.jpcb.5b03254

Beschreibung: The Journal of Physical Chemistry B DOI: 10.1021/acs.jpcb.5b07283

Beschreibung: Journal of the American Chemical Society DOI: 10.1021/jacs.5b06745

Beschreibung: Journal of Proteome Research DOI: 10.1021/acs.jproteome.5b00277

Beschreibung: Journal of the American Chemical Society DOI: 10.1021/jacs.5b03275

Beschreibung: Environmental Science & Technology DOI: 10.1021/acs.est.5b01884

Beschreibung: Environmental Science & Technology DOI: 10.1021/acs.est.5b02227