ALBERT

Description: In the present study, we employ fluorescence spectroscopy, dynamic light scattering, and molecular docking methods. Binding of anticancer drug anastrozole with human lysozyme (HL) is studied. Binding of anastrozole to HL is moderate but spontaneous. There is anastrozole persuaded hydrodynamic change in HL, leading to molecular compaction. Binding of anastrozole to HL also decreased in vitro lytic activity of HL. Molecular docking results suggest the electrostatic interactions and van der Waals forces played key role in binding interaction of anastrozole near the catalytic site. Binding interaction of anastrozole to proteins other than major transport proteins in blood can significantly affect pharmacokinetics of this molecule. Hence, rationalizing drug dosage is important. This study also points to unrelated effects that small molecules bring in the body that are considerable and need thorough investigation.

Description: Background. Young people are challenged with sexual and reproductive health (SRH) problems due to limited access to services and information. It contributes a high burden of sexually transmitted disease, unsafe abortion, and premature mortality, especially in low-income countries like Ethiopia. Hence, this study aimed at assessing the SRH service utilization and associated factors among college students at West Arsi Zone in Oromia region, Ethiopia. Methods. Institutional-based cross-sectional study was conducted among 519 randomly selected college students from January 01, 2019, up to April 30, 2019. Data were collected through self-administered pretested questionnaires. Data entry and analysis for descriptive and logistic regression models were performed by using SPSS (version 23). The result was declared as statistically significant at p 

Description: The article addresses the extended Graetz–Nusselt problem in finite-length microchannels for prescribed wall heat flux boundary conditions, including the effects of rarefaction, streamwise conduction, and viscous dissipation. The analytical solution proposed, valid for low-intermediate Peclet values, takes into account the presence of the thermal development region. The influence of all transport parameters (Peclet Pe, Knudsen Kn, and Brinkman Br) and geometrical parameters (entry length and microchannel aspect ratio) is investigated. Performances of different wall heat flux functions have been analyzed in terms of the averaged Nusselt number. In the absence of viscous dissipation Br=0, the best heating protocol is a decreasing wall heat flux function. In the presence of dissipation Br〉0, the best heating protocol is a uniform wall heat flux.

Description: At present, there are two main standards, ISO 23828 : 2013 and SAE J 2572–2014, which prescribe the hydrogen consumption test using the pressure method, gravimetric method, and flow method. However, these methods do not meet the test requirements for electric energy consumption and the range of plug-in hybrid fuel cell vehicles (FCVs) which are the main technical considerations in China and Europe. In this paper, a new test method for the hydrogen consumption, electric energy consumption, and range of FCVs is proposed without the use of additional hydrogen supply, measurement instruments, or energy consumption correction, which can improve the operability of the test and avoid the conversion between electric energy and hydrogen. One plug-in hybrid FCV and one nonplug-in hybrid FCV were tested using the proposed method. The results show that the new method meets the requirements of fuel economy test for FCVs with hydrogen consumption rate, electric energy consumption rate, the range for plug-in hybrid FCVs, hydrogen consumption rate, and the range for nonplug-in FCVs.

Description: The unstoppable quest for low-cost reinforcing agent gingered the enthusiasm towards developing and utilising the agro-based waste product as reinforcement since they are promptly accessible, sustainable, and inexpensive to purchase. In this study, AA6061/rice husk ash matrix composites were produced through metallurgical stir casting techniques. Different weight percentages of reinforcement in the range of 2%, 4%, 6%, and 8% were used to fabricate the composites. The reinforced composites were characterized by SEM/EDS for microstructural study. The mechanical behaviour was examined for all the produced samples. SEM/EDS analysis revealed the presence of silica, a major constituent of rice husk ash in the produced composites. The results of the mechanical behaviour show that upgrading the weight percentage of reinforcing agent increases the mechanical properties. AA6061/8% rice hush ash generated a consistent rise with filler concentration in comparison with the aluminium alloy in all operating functions.

Description: The flavonoids are compounds synthesized by plants, and they have properties such as antioxidant, anticancer, anti-inflammatory, and antibacterial, among others. One of the most important bioactive properties of flavonoids is their antioxidant effect. Synthetic antioxidants have side toxic effects whilst natural antioxidants, such as flavonoids from natural sources, have relatively low toxicity. Therefore, it is important to incorporate flavonoids derived from natural sources in several products such as foods, cosmetics, and drugs. For this reason, there is currently a need to extract flavonoids from plant resources. In this review are described the most important parameters involved in the extraction of flavonoids by unconventional methods such as ultrasound, pressurized liquid extraction, mechanochemical, high hydrostatic pressure, supercritical fluid, negative pressure cavitation, intensification of vaporization by decompression to the vacuum, microwave, infrared, pulsed electric field, high-voltage electrical discharges, and enzyme-assisted extraction. There are no unified operation conditions to achieve high yields and purity. Notwithstanding, progress has been achieved in the development of more advanced and environmentally friendly methods of extraction. Although in literature are found important advances, a complete understanding of the extraction process in each of the unconventional techniques is needed to determine the thermodynamic and kinetic mechanisms that govern each of the techniques.

Description: Background. The rational use of drugs requires that patients receive medications appropriate to their clinical needs, in doses that meet their own individual requirements, for an adequate period of time, and at the lowest cost to them and their community with full information and with the lowest possible cost. If one of these is not met, it is referred to as irrational drug use. Many drugs have been sold or prescribed inappropriately in the world, and a significant part of the world population lacks access to essential medicine. The aim of this study was to assess practice towards rational drug use at Finoteselam and Asirade Zewudie hospitals. Methods. A cross-sectional study design was used for this study, and the study was conducted from October 11 to November 30, 2019. A total of 770 prescriptions were selected as per WHO criteria by using systematic random sampling and reviewed with the help of an observational checklist. The data were entered and processed with SPSS version 25 and evaluated using the WHO criteria. Result. The average number of drugs per prescription was 1.8 and 2.05, antibiotics encountered were 77.7% and 72.5%, injections encountered were 5.97% and 7.01%, percentage of drugs prescribed by generic names was 97% and 93.4%, counseling time was 1.6 minutes and 2.25 minutes, and dispensing time was 51.3 seconds and 62.72 seconds at Finoteselam and Asirade Zewudie hospitals, respectively. Conclusion. The majority of WHO core drug use indicators were not met in the two hospitals. The average number of drugs encountered in Asirade Zewudie hospital was slightly higher than the WHO recommended range, whereas the average number of drugs encountered in Finoteselam hospital was exactly equal. The percentage of antibiotics encountered was very high compared with WHO recommendation, but the percentage of injections encountered was below the WHO recommended range and time spent on counseling and dispensing was too short when compared with WHO recommendation. In addition to this, both hospitals had no essential drug list or formulary as well as a key drug list.

Description: Rice husk biochars were prepared by carbonization at 400–600°C. The products were analyzed by FTIR, SEM-EDS, BET, and approximate analysis in order to find final products with the best properties and the lowest carbonization temperature. It has been found that the biochar prepared at 500°C, which has 37.86 ± 0.11% yield, 341.0776 m2/g of BET surface area, and 0.136639 cm3/g of micropore volume, is suitable for use as a root supplement in the aquaponic system. The aquaponic systems consist of aquaculture and a hydroponic system with and without biochar supplement. The control experiment consists of an aquaculture and planting panel with biochar supplement disconnected from each other. Tilapia and Chinese morning glory were used for growth studies. The water quality from all aquaculture ponds has also been analyzed at an interval of 10 days for 47 days. The results showed that the growth rates of Tilapia and Chinese morning glory in the aquaponic system with biochar were clearly higher than in the control experiment, which is in accordance with the water quality in each aquaculture pond. However, the growth rates of Tilapia (23.5 g/body vs. 22.7 g/body) and morning glory (3.907 g/stem vs. 2.609 g/stem) in supplemented biochar system tend to be higher than the nonsupplemented biochar system. It has been shown that rice husk biochar can help in treating water in the aquaponic system by increasing the amount of dissolved oxygen in the aquaculture water and conversion of toxic compounds to those beneficial for plant growth.

Description: Despite the achievements reported from using rainwater harvesting systems, the contribution and drawbacks that affect their usage in mountainous landscapes have received little attention. The uptake and usage of domestic rooftop rainwater harvesting systems (RRWHS) in developing countries is on the increase due to increasing water scarcities. We explored the effect of rainfall variability on water supply and the downsides of using the systems by rural households in Uganda. The objectives were to assess the variability of rainfall (1985–2018), categorise RRWHS used, and examine the influence of slope ranges on the placement of systems and also to quantify the harvested and saved rainwater and establish the factors that affected system usage. Rainfall variability was assessed using a Mann–Kendall test, while system contributions and drawbacks were examined using socioeconomic data. A representative of 444 households were selected using a multicluster sampling procedure and interviewed using semistructured questionnaires. Findings revealed that the months of March, April, September, August, and October experienced an upward trend of rainfall with a monthly coefficient of variation between 41 and 126%. With this, households responded by employing fixed (reinforced concrete tanks, corrugated iron tanks, and plastic tanks) and mobile RRWHS (saucepans, metallic drums/plastic drums, jerrycans, and clay pots). At the high altitude, households deployed mostly plastic jerrycans and industrial plastic/metallic drums to harvest and save water. Overall, the mean annual volume of rainwater harvested on the slopes of Mt. Elgon was 163,063 m3/yr, while the potential to save water ranged from 4% to 7% of the annual household water demand. The factors that hindered the deployment of RRWHS to harvest and save water were high operational costs, price fluctuations, unreliable rainfall pattern, inadequate funds, and limited accessibility. The rainfall received if well-harvested and saved can redeem households of water insecurity, though there is an urgent need of subsidies from the government to increase accessibility of the systems.