ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Articles  (42,711)
  • Periodicals Archive Online (PAO)  (40,900)
  • Blackwell Publishing Ltd
  • Political Science  (41,100)
  • Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics  (1,611)
Collection
  • Articles  (42,711)
Years
Topic
  • 1
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The changes in porosity and elastic moduli of YSZ-containing nickel-based anode materials for solid oxide fuel cells were studied as a function of the fraction of reduced NiO. Anode samples were reduced in a gas mixture of 4% hydrogen and 96% argon for different periods of time at 800°C and their Young's and shear moduli were determined afterward at room temperature using resonant ultrasound spectroscopy and impulse excitation. It was found that the magnitude of Young's and shear moduli decreased significantly with increasing fraction of reduced NiO and that the magnitude of the elastic moduli of a fully reduced Ni–YSZ anode was ∼45% lower than that of unreduced NiO–YSZ. Because the elastic moduli of NiO are close to those of Ni, the observed decrease in the magnitude of the elastic moduli was found to be caused mainly by the significant increase in the porosity of the sample as a result of NiO reduction. Expressions are presented for the amount of porosity and the magnitude of the elastic moduli as a function of the fraction of reduced NiO.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 2
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Two- and three-dimensional SiCr/SiC composites have been prepared starting from Tyranno SA(tm) fiber preforms. Preform densification has been performed by a modified preceramic polymer impregnation and pyrolysis (PIP) process consisting of filling the preform large interbundle voids with SiC powder before the PIP process. This step was accomplished by low-pressure infiltration of a SiC powder dilute slurry through the preform thickness. Specimens were further processed with polymer impregnation and pyrolysis to determine the effects on structural, thermal, and mechanical properties of the obtained composites. High-temperature pyrolysis treatment, which promoted polymer derived SiC matrix crystallization, markedly increased thermal diffusivity.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 3
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Carbon is commonly added to sulfate-fined silicate-glass batches to enhance the fining process. Reactions between carbon and Na2SO4 modify the SOx emissions from Na2SO4 decomposition. Fourier-transform infrared (FTIR) spectrometry is used to analyze the emission of air pollutants from the isothermal decomposition of Na2SO4 + C undertaken using thermogravimetric analysis (TGA). The FTIR spectrometer is calibrated using standard gas mixtures containing CO, CO2, SO2, NO, and NO2. The collected spectra are quantified using the classical least-squares (CLS) approximation. The TGA-FTIR system provides SOx, and COx, concentrations versus time data from the isothermal decomposition of Na2SO4, in the presence of a carbon black. Mass spectrometry (MS) complements FTIR by being able to detect SO(g).
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 4
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Different ratios of the precursor phases of SrFeO3–x (SFO) and SrMoO4 (SMO) were used to prepare Sr2FeMoO6 (SFMO) by a solid-state reaction. X-ray diffraction was used to identify the phases. A residual SMO was observed to exist in the sample with an SFO/SMO ratio of 0.9:1. The sample with a residual SMO phase had higher resistivity, lower magnetization, but higher low-field magnetoresistance (LFMR). High-resolution transmission electron microscopy was used to identify the compositions and phases. Nanometer-sized amorphous-like clusters of SMO phase were located inside the grains rather than at grain boundaries; however, some boundaries were rich in the strontium ion. The possible mechanisms for the conduction and the increase of LFMR of SFMO are discussed.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 5
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Submicro- and nano-sized liquid-phase-sintered SiC ceramics were mechanically tested by nanoindentation in the peak load range 5–400 mN. The submicro-sized sample showed a marked indentation size effect which the nano-sized samples did not exhibit. The relevance of indentation depth with respect to the microstructural scale has been outlined. In the investigated grain-size range, the hardness dependence on the grain size could be described by a load-dependent inverse Hall–Petch relation. Young's modulus was less microstructure- and load-dependent. Because of the very fine microstructure, the nano-sized SiC materials gave lower elastic values than the submicro-sized SiC ceramic.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 6
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Samples of composition Ba1−xLaxTi1−x/4O3, x= 0, 0.003, 0.03, and 0.10, were prepared by an alkoxide sol–gel route with final firing of ceramics at 1100°C, 2 h in air. All samples showed bulk insulating behavior with no evidence of semiconductivity caused by either direct donor doping or oxygen loss.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 7
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 8
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: We have studied the rheological property evolution and hydration behavior of white and ordinary portland cement (type I) pastes and concentrated cement–polyelectrolyte suspensions. Cement composition had a marked effect on the elastic property evolution (G′(t)) and hydration behavior of these suspensions in the presence of poly(acrylic acid)/poly(ethylene oxide) copolymer (PAA/PEO), even though their affinity to adsorb such species was nearly identical. Both white and ordinary portland cement pastes exhibited G′0 values of ∼104 Pa and fully reversible G′(t) behavior until the onset of the acceleratory period (t= 2 h), where the pastes stiffened irreversibly. In contrast, cement–PAA/PEO suspensions exhibited G′0 values of ∼1 Pa and G′(t) behavior comprised of both reversible and irreversible features. Interestingly, ordinary portland cement–PAA/PEO suspensions experienced a gel-to-fluid transition on high shear mixing at short hydration times (〈1 h), and the particle network did not rebuild until ∼24 h of hydration. In sharp contrast, white portland cement–PAA/PEO suspensions remained weakly gelled throughout the initial stage of hydration even after high shear mixing. At longer hydration times (〉1 h), both cement–PAA/PEO suspensions exhibited G′i(t) ∼ exp(t/τc) with τc values of 5.6 and 1.3 h for ordinary and white portland cement, respectively. Our observations suggest that hydration phenomena impact interparticle forces during early stage hydration and, ultimately, lead to initial setting through the formation of solid bridges at the contact points between particles within the gelled network.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 9
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: A new ceramic freeze-casting technique capable of manufacturing near room temperature with a sublimable vehicle was accomplished. Fluid-concentrated slurries of Al2O3 powder in molten camphene (C10H16) were prepared at 55°C. These slurries were quickly solidified (frozen) at room temperature to yield rigid solid green bodies, followed by frozen camphene removal by sublimation (freeze-drying) with negligible shrinkage. Sintering without any special binder burnout process yielded sintered bodies with over 98% theoretical density. The proposed advantages include (1) elimination of extremely cold temperatures, (2) elimination of troublesome binder burnout process, and (3) fast manufacturing cycle due to quick solidification.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 10
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Dense composites in the Ti-B-N system have been produced by reactive hot pressing of titanium and BN powders. The effect of the addition of a small amount of nickel (1–3 wt%) on the reaction kinetics and densification of TiN–TiB2 (40 vol%) composite has been studied. Composites of ∼99% of theoretical density have been produced at 1600°C under 40 MPa for 30 min with 1% nickel. The hardness and fracture toughness of these composites are 24.5 ± 0.97 GPa and 6.53 ± 0.27 MPa·m1/2, respectively. The microstructural studies on samples produced at lower temperatures indicate the formation of a transient liquid phase, which enhances the kinetics of the reaction and densification of the composite.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 11
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: This paper presents new findings on ultrasonic spray pyrolysis of zirconium hydroxyl acetate precursor drops whose sizes were precisely measured using laser light diffraction technique. Precursor concentration plays a predominant role in determination of product particle size. At 0.01 wt% precursor concentration, conventional spray pyrolysis at 750°C using precursor drops 5–8 μm in diameter, generated by an ultrasonic nebulizer at 2.66 MHz, yielded uniform spherical yttria-stabilized zirconia (YSZ) particles 73 nm in diameter measured by scanning electron microscopy. The YSZ particle diameters were much smaller than those predicted by the one-particle-per-drop mechanism. Under similar reaction conditions, the high-throughput ultrasound-modulated two-fluid (UMTF) spray pyrolysis of larger precursor drops (28-μm peak diameter) also yielded spherical dense particles; they were significantly smaller in size than those produced by the low-throughput conventional ultrasonic spray pyrolysis of smaller drops (6.8-μm peak diameter).
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 12
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Thermoelectric elements consisting of the layered polycrystalline materials of Al-doped ZnO and NaCo2O4 were prepared using the pulse electric-current sintering (PECS) method at 900°C for 3 min. Direct contact between the polycrystalline Al-doped ZnO and the NaCo2O4 was obtained in a single-step process for the stacked powders. The electrical conductivities of the polycrystalline materials prepared by PECS were higher than those of materials prepared by conventional sintering, despite their porous structure. The thermoelectric voltage of the 1-mol%-Al-doped ZnO and NaCo2O4 polycrystalline element (measuring ∼6 mm × 3 mm × 15 mm) was 83 mV at dT= 500 K, when the junction of the elements was at 800°C.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 13
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Pb(Zr,Ti)O3–Pb(Mn1/3 Nb2/3)O3 (PZT–PMnN) system has been studied for high-power piezoelectric applications. This study investigates this system to find out the composition with high-power density piezoelectric characteristics and low tem-perature coefficient of resonance frequency (TCF). It was found that the composition 0.9PZT–0.1PMnN (Zr/Ti = 0.51/0.49) modified with 6 mol% Sr exhibits a TCF of −8 ppm/°C (−20 to +80°C). Further, the dielectric and piezoelectric properties of this composition are as follows: kp= 0.53; Qm= 800; d33= 274; ε33/ε0= 1290 and tan δ=1.1%, which shows the suitability of this composition for ultrasonic devices used under fluctuating thermal environment.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 14
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Beam bending is an excellent method for measuring low permeabilities (≤10−18 m2) in homogeneous materials, because it is fast, requires no high pressure, and provides a concurrent measurement of the modulus of the material. The method was previously analyzed and substantiated for cylindrical or square beams. Recently, the analysis was extended to include isotropic and transversely isotropic rectangular beams. In this paper, the analysis is applied to measurements performed on cement paste, and it is shown that the solution for isotropic rectangular beams accounts for changes in the hydrodynamic behavior caused by changing the aspect ratio of the sample. The permeability and elastic modulus results are verified through comparison to previous measurements on cylindrical beams.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 15
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The deformation behavior of boron- and carbon-doped β-silicon carbide (B,C-SiC) with an average grain size of 260 ± 18 nm containing 1 wt% boron was investigated by compression testing at elevated temperatures. Extensive grain growth during deformation was observed. The stress–strain curves were compensated for grain growth by assuming power-law type of dependence on grain size and strain rate. The stress exponent n was ∼1.3 and the grain size exponent p was ∼2.7 at temperatures ranging from 1593° to 1758°C. The apparent activation energy of deformation Qd was ∼760 kJ/mol, which was lower than the activation energy for lattice diffusion of silicon and carbon in SiC and higher than that for grain-boundary diffusion of carbon in SiC. These results suggest that the deformation mechanism of the fine-grained B,C-SiC is grain-boundary sliding accommodated by the grain-boundary diffusion.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 16
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Chromium-containing stainless steel (SS) is a prospective material for use as an interconnect in solid oxide fuel cells (SOFCs). However, during operations at high temperatures, the growth of oxide scales causes the performance of the interconnect and SOFC as a whole to deteriorate. The coating of SS 446 with a conducting perovskite is a potential method of slowing the growth of oxide scale and, therefore, improving overall SOFC performance. In the present research, the structural characterization of a pure LaCrO3 thin film on the SS 446 substrates has been performed as a model material that can be used as a barrier coating for the metallic interconnect. The deposition of an amorphous La-Cr-O thin film on SS 446 was performed using radio-frequency (rf) magnetron sputtering. The deposited amorphous film was annealed in air to form the desired perovskite phase. The film underwent an amorphous to LaCrO4 phase transition during annealing at 500°C with further transformation to LaCrO3 orthorhombic phase during annealing at 700°C. A self-organized dendritic structure was reported as a result of the perovskite-phase formation. Although formation of various oxides, such as Fe2O3 and Fe3O4, was observed during the annealing of uncoated SS 446 in air, the coating of SS 446 surface with LaCrO3 film prevented formation of various oxide phases at the interconnect surface. The structural characterization of the films and SS 446 surfaces was accomplished using scanning electron microscopy with energy-dispersive X-ray analysis, X-ray diffractometry, micro-Raman spectroscopy, and nanoindentation.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 17
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The density, surface tension, and viscosity of the melts from the PbO-B2O3-SiO2 system have been measured at temperatures in the range 1073–1473 K. The effect of composition on these properties was also investigated. The density of the melt was found to increase linearly with increasing PbO content. Molar volume was derived from the density data, and its deviation from the additivity of partial molar volumes was calculated. These deviations in molar volume from those obtained from additivity rules have been used along with the ratio of various coordination numbers of boron (as reported by Bray) to discuss the structure of the melts. The surface tension was found to decrease with decreasing SiO2/B2O3 ratio, and to increase in the range of the PbO content between 30 and 60 mol%, showing a maximum at ∼60 mol% PbO, and then decreased with further additions. This result suggested that the surface tension would be affected primarily by the B2O3 content in the range of the PbO content between 30–60 mol%, and mainly by the PbO content in the range of the PbO content 〉60 mol%, respectively. The viscosity of the melt was found to decrease linearly with increasing PbO content. The results obtained indicate that the increase in viscosity with B2O3 was half that of SiO2 (on a molar basis), and an empirical equation has been proposed for the viscosity as a function of mole fraction.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 18
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Core/shell structures have been prepared via a mechanofusion system by employing several kinds of spherical polymers as a core material and Al2O3 powder or a mixture of Al2O3 and SiO2 powders as a shell material. The effect of the kind of core polymers on the quality of the resulting hollow alumina microspheres has been discussed on the basis of the thermal decomposition behavior of spherical polymers used as a core material. A large fraction of hollow alumina microspheres reflecting the shape and the particle size distribution of the core polymer could be fabricated after sintering at 1600°3C for 3 h, when highly cross-linked poly(methyl methacrylate) (PMMA) microspheres with a gel fraction of 99.03% were used as a core polymer, and abrupt firing at temperatures higher than 500°3C was adopted to remove the PMMA microspheres. The addition of 5 mass% SiO2 to the Al2O3 shell layer was found to be useful for maintaining the spherical shell structure during the firing process and for fabricating a large fraction of hollow alumina microspheres after the sintering.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 19
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Well-defined and stoichiometric spherical particles of BaTiO3 of narrow size distribution were produced at 82° and 92°3C by precipitation from chloride solutions in a strong alkaline environment. The size of the particles can be tailored in the range from ≅103 to 70–80 nm by increasing the barium concentration from ≅0.07 to 0.7 mol/L. The particles are composed of tight aggregates resulting from the assembly of several nanocrystals. The size of the nanocrystals decreases from 200–300 to 30–40 nm by increasing reactant concentration. At low barium concentration (≤0.07 mol/L at 82°3C, ≤0.06 mol/L at 92°3C), formation of BaTiO3 is strongly slowed down and nonstoichiometric, Ti-rich powders are produced. Under these conditions, the particles have the tendency to develop a dendritic-like morphology.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 20
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Crystals of δ-Y2Si2O7 (space group P121/c1) were examined using high-temperature powder X-ray diffractometry to determine their unit-cell dimensions from 296 to 1473 K. The lattice deformation induced by thermal expansion was investigated using matrix algebra analysis to determine the directions and magnitudes of the principal distortions (Λi, i= 1,2, and 3). The directions of Λ1 and Λ3 were defined by the acute angle Λ1c, which linearly decreased from 5(2)° to —5.5(3)° with increased temperature from 504 to 1473 K. The Λ2-axis invariably coincided with the crystallographic b-axis. The magnitudes of Λ1 and Λ2 steadily increased to, respectively, 1.0061(1) and 1.0068(1) during heating to 1473 K, while Λ3 remained almost constant for the entire temperature range. The mean principal distortion, Λm (= (Λ1+Λ2+Λ3)/3), steadily increased to 1.0044(1) with increased temperature to 1473 K. The coefficient of mean linear thermal expansion (α) was derived from the mean principal strain (Λm - 1) as α= (Λm - 1)/ΔT. The temperature dependence was determined to be α= 2.03 times 103+ 1.36(T - 296) (10-9 K-1). Provided that the rule-of-mixtures holds for the Y2Si2O7/Y2SiO5 composites as protective coating on SiC substrates, the volume fractions of 0.72-0.77 (70–75 mass%) would be necessary for the Y2Si2O7 component to match the α-values of both materials.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 21
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Microcellular silicon oxycarbide open cell ceramic foams were fabricated from a silicone resin. Microcellular foams, with a cell size ranging from ∼1–80 μm, were fabricated using poly(methyl methacrylate) microbeads as sacrificial templates. The compression strength of the foams decreased with increasing cell size.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 22
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Electroconductive zirconia-toughened mullite (TiN/ZTM) intragranular nanocomposite was fabricated by hot-pressing a powder mixture of nano-sized TiN, ZrO2(2Y), and mullite gel. The material showed a good sinterability and could be highly densified at a low temperature of 1300°3C. Sintering temperature strongly influenced the microstructure and electrical resistivity of the material. The electrical resistivity increased monotonously from 20 Ω-cm to 1.5 times 106°3Cm, as the sintering temperature was increased from 1300° to 1500°3C. TEM results indicated that such a phenomenon could be ascribed to the changes in the microstructure of the material, which led to a decrease in the connectivity of the TiN network in the sample as the sintering temperature was increased.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 23
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Effects of fluids on material removal rate, chipping damage, and surface roughness in the simulated clinical-dental machining of a dental-type glass ceramic were investigated. Significant differences in removal rate were obtained among the fluids investigated, but only a 4 wt% boric acid solution gave a higher removal rate than conventionally used water. Chipping damage was substantially lower for the boric acid and an oil-emulsion coolant compared with other fluids tested. Surface roughness was independent of the fluids used. The results indicate that improvement can be achieved in both material removal rate and machining damage by the appropriate selection of coolant chemistry.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 24
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: This paper reviews the structures and properties of 10 binary, ternary, and quaternary crystals within the equilibrium phase diagram of the SiO2–Y2O3–Si3N4 system. They are binary compounds SiO2, Y2O3, Si3N4; ternary compounds Si2N2O, Y2Si2O7, and YSi2O5; and quaternary crystals Y2Si3N4O3 (M-melilite), Y4Si2O7N2, (N-YAM), YSiO2N (wallastonite), and Y10(SiO4)6N2 (N-apatite, N-APT). Although the binary compounds are well-known and extensively studied, the ternary and the quaternary crystals are not. Most of the ternary and the quaternary crystals simply have been referenced as secondary phases in the processing of nitrogen ceramics. Their crystal structures are complex and not precisely determined. In the quaternary crystals, there exists O/N disorder in that the exact atomic positions of the anions cannot be uniquely determined. It is envisioned that a variety of cation–anion bonding configurations exist in these complex crystals. The electronic structure and bonding in these crystals are, therefore, of great interest and are indispensable for a fundamental understanding of structural ceramics. We have used ab initio methods to study the structure and bonding properties of these 10 crystals. For crystals with unknown or incomplete structural information, we use an accurate total energy relaxation scheme to obtain the most likely atomic positions. Based on the theoretically modeled structures, the electronic structure and bonding in these crystals are investigated and related to various local cation–anion bonding configurations. These results are presented in the form of atom-resolved partial density of states, Mulliken effective charges, and bond order values. It is shown that Y–O and Y–N bonding are not negligible and should be a part of the discussion of the overall bonding schemes in these crystals. Spectroscopic properties in the form of complex, frequency-dependent dielectric functions, X-ray absorption near-edge structure (XANES), and the electron energy-loss near-edge structure (ELNES) spectra in these crystals also are calculated and compared. These results are discussed in the context of specific bonding configurations between cations (silicon and yttrium) and anions (oxygen and nitrogen) and their implications on intergranular thin films in polycrystalline Si3N4 containing rare-earth elements.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 25
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Simultaneous synthesis and sintering of hexagonal α-Ti1−x-Alx(N) (0 ≤x≤ 0.08) solid solutions, which contain a small amount of nitrogen, have been performed by a self-propagating high-temperature combustion method under a nitrogen pressure of 4 MPa. Dense materials (∼99% of theoretical) prepared directly from a mixture of elemental (Ti and Al) powders reveal homogeneous microstructure composed of fine grains (12–16 μm). α-Ti1−xAlx(N) (x= 0.02; Ti0.98Al0.02N0.26) exhibits a three-point bending strength σb of 390 MPa, a Vickers hardness Hv of 9.24 GPa, and a fracture toughness KIC of 4.89 MPa·m1/2; their mechanical properties are much improved by doping Al into α-Ti(N), in comparison with those (σb= 245 MPa, Hv= 9.02 GPa, and KIC= 3.77 MPa·m1/2) of α-Ti(N) fabricated under the same conditions.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 26
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Electrophoretic deposition has been used to synthesize nickel–alumina, functionally graded materials from NiO and alumina suspensions in ethanol. Suspension stability and the kinetics of deposition were studied to determine optimum conditions. Deposition starts with an alumina suspension into which a stream of NiO suspension is injected at various flow rates to obtain the desired profiles. The latter were controlled by varying the deposition current density and component flow rate. The green bodies obtained were sintered in Ar/H2 atmosphere to reduce the NiO to nickel. Various gradation profiles were obtained illustrating the facility of EPD to synthesize continuously graded materials. NiO was used as the precursor for nickel to alleviate settling and rough columnar deposit problems.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 27
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 80 (1997), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: X-ray diffraction (XRD) patterns from nominally β-SiC specimens often differ from those expected for the cubic crystal structure. These differences include the presence of additional peaks, enhanced background intensities, peak broadening, changes in relative peak heights, and shifts in peak positions. It has long been recognized that they are due to the presence of stacking faults, and models relating the experimental observations to stacking fault population have continued to evolve. The presence and relative magnitude of these features vary among different β-SiC specimens. In this work, computer simulations were used to show that the variations are closely related to differences in the type and spatial distribution of stacking faults in each specimen. In these simulations, stacking sequences were generated using a selectively activated 1-D Ising model with a Boltzmann-type probability function for specifying errors, which allows a wide variety of fault configurations to be generated. Direct correlations between different features in the XRD data to the underlying fault population are demonstrated, which are discussed in this paper. It is also shown that this computer model is general, in the sense that many of the models presented in prior work can be interpreted as limiting cases of it.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 28
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 4 (1996), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: This note discusses a number of key issues developed by the Corporate Governance Project of the American Law Institute (ALI) and published in its report, The Principles of Corporate Governance: Analysis and Recommendations. This examination will focus on the socially and ethically important elements regarding the objective and conduct of the business corporation, and the twin fiduciary duties of care and fair dealing.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 29
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 3 (1995), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 30
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 3 (1995), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: The stakeholder co-operatives formed around the town of Mondragón in the Basque region of Spain have been outstandingly successful on a number of measures in comparison with other forms of firms. The control architecture within and between Mondragón firms contains a number of innovations and lessons for developing the theory and practice of corporate governance. This paper outlines the 38 year evolution of Mondragón structures.The control and incentive architecture of Mondragón firms was custom designed according to the nature of both their activities and their principal stakeholders. The resulting unique control arrangements and outstanding performance supports the hypothesis that the structure of governance is a determinant of sustainable competitive advantages. The evolution of Mondragón firms also illustrates the need to consider corporate architecture as a variable at any one time or over time. The Mondragón experience illustrates how the social research approach of ‘action science’ can be used to create competitive enterprises. The paper recommends this approach for developing the theory and practice of corporate governance.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 31
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 3 (1995), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: This article is based on the IMD Case Study of the same name written by Professor Fred Neubauer and Dr. Marika Taishoff.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 32
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 3 (1995), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 33
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 3 (1995), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 34
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 3 (1995), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 35
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 3 (1995), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: Thomas Clarke and Elaine Monkhouse (eds), 1994 hardback, Rethinking the Company, London: Finance Times/Pitman Publishing.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 36
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 2 (1994), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 37
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 1 (1993), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 38
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 1 (1993), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 39
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 1 (1993), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: This article examines a case of fraud – the Maxwell case – to assess the implications for corporate governance in Britain. The analysis of the case shows how Robert Maxwell was able to avoid the established network of regulations and controls. The authors then make a number of recommendations which suggest how this kind of fraud may be prevented in the future.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 40
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 1 (1993), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 41
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 1 (1993), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 42
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 1 (1993), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 43
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Public administration 81 (2003), S. 0 
    ISSN: 1467-9299
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: This paper presents empirical and theoretical analysis of the enactment of New Public Management (NPM) within the UK police service. It draws on empirical material gathered in a two-year study that explores the ways in which individual policing professionals have responded to, and received, the NPM discourse. Theoretically informed by a discursive approach to organizational analysis, the paper focuses on the new subject positions promoted within NPM that serve to challenge traditional understandings of policing organization and identities. The paper examines the implications of this for policies that promote community orientated policing (COP) and increased inter-agency partnership. The paper argues that the promotion of a more progressive form of policing, based on community orientation and equality principles, may struggle to gain legitimacy within the current performance regime that legitimizes a competitive masculine subjectivity, with its emphasis on crime fighting.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 44
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Public administration 81 (2003), S. 0 
    ISSN: 1467-9299
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: Greater fiscal transparency is seen by its advocates as a means of improving economic governance arrangements in ways which, by promoting fiscal stability, will in turn improve the functioning of the government sector and facilitate improvements in the economic environment for the private sector. ‘Fiscal transparency’ is much acclaimed by policy-makers, not only in the UK Treasury but also by the IMF and OECD. Fiscal transparency can have substance or can just be voguish incantation. This article explores the meaning of fiscal transparency, by examining its structure and evaluating criteria for assessing the degree of fiscal transparency attached to particular sets of circumstances. It explores the link between transparency and accountability, developing the distinction between event and process transparency. Consideration is given to the trade-off between the value of sunlight (to employ an analogy) and the danger of over-exposure. The performance of the United Kingdom against emerging international best practice is examined, with regard to both public expenditure and taxation. By international standards, UK fiscal transparency is high. Nevertheless, there is a major gap between UK rhetoric and practice, indicating a  divergence between nominal and effective transparency. This is evidenced by: frequent changes in public expenditure definitions; the non-publication of important analyses; the location of certain liabilities ‘off-balance sheet’; and a lack of candour about tax policy.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 45
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Public administration 81 (2003), S. 0 
    ISSN: 1467-9299
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: How are government policy commitments converted into legislation and what happens in the conversion? The role of civil servants in preparing legislation is far more important than is generally assumed. By looking at the work of four recent bill  teams in Britain – teams of civil servants given the task of developing Acts of Parliament – their crucial roles in initiating policies, placing them on the political agenda (even helping secure their place in a party manifesto), developing them, making sure they pass through parliament and enacting them once they have reached the statute books are assessed. The article explores the composition and working methods of bill teams. These teams work with considerable autonomy in developing legislation, but it cannot be assumed that they operate outside ministerial control. Teams see themselves as reflecting the priorities of the government in general and their ministers in particular. Yet ministers typically know relatively little about the law they are bringing in until they receive the submissions and briefings from their officials. Perhaps the biggest danger for democracy is not a civil service putting forward proposals which a minister feels forced to accept, but rather that ministers do not notice or fully appreciate what is being proposed in their name despite having the political authority to change it and a civil service which bends over backwards to consult and accommodate them.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 46
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Public administration 81 (2003), S. 0 
    ISSN: 1467-9299
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: This article will explore the proposition that cabinet government is dead by examining the different ways in which cabinet government is conceptualized and by suggesting that the lack of precision in the debates has undermined much of the criticism. It will seek to draw the strands of research together in a way that can emphasize how cabinet government has evolved while remaining at the core of government. The article will draw evidence from three countries, Australia, Canada and Britain, in each of which, despite the common heritage, cabinet has evolved in different ways.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 47
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Public administration 81 (2003), S. 0 
    ISSN: 1467-9299
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: Since the 1990s there has been a long-standing concern in government towards public sector accountability, management, efficiency and service delivery. A number of studies have attempted to analyse the multitude of individual changes and their manifestations through analyses based on a variety of institutional, policy and governmental distinctions. This paper attempts to specify the changes with particular reference to planning, and to consider the evolution of the public service ethic in planning towards more openness, scrutiny, transparency and efficiency with particular reference to the changing ethos of the professional employee. We first explore the  main impacts upon local government, the public service ethic and professional planning as a consequence of the Modernization agenda and freedoms and flexibilities initiative. We then look at how such changes have impacted upon the ethos and values in public service and planning. We draw on some evidence of Ombudsman cases to highlight issues of professional values in planning practice over the past decade before finally drawing these strands together in some conclusions. Our principal findings indicate that the much-trumpeted decline of services and standards may not have been as apparent as is sometimes portrayed and that internal professional attitudes and values towards the external changes may not have significantly altered over the same period.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 48
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Public administration 81 (2003), S. 0 
    ISSN: 1467-9299
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: Inspired by New Public Management, many countries have changed their central public apparatus from an integrated to a more segregated structural model. A central element in this process is structural devolution and the establishment of new or reorganized state-owned companies with increased business autonomy and new formal control systems. This paper focuses on how this development, as exemplified by the case of Norway, is affecting the role of central executive political and administrative leaders. The study, based on elite interviews, shows that corporatization has made the role of central leaders more complex and ambiguous and undermined traditional political control. We interpret this development from a transformative perspective, underlining how structural devolution is filtered through the dynamic context of environmental pressure and internal structural and cultural factors; in addition, experiences from New Zealand are used to contrast the Norwegian case.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 49
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Public administration 81 (2003), S. 0 
    ISSN: 1467-9299
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 50
    Electronic Resource
    Electronic Resource
    Oxford, UK and Boston, USA : Blackwell Publishing Ltd
    Public administration 81 (2003), S. 0 
    ISSN: 1467-9299
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: Public management reforms at the local (community) and regional (canton) level in Switzerland almost all embrace elements of the new public management. In addition, in Switzerland, the merging of small communities as well as new developments such as electronic government are becoming apparent. The new public management model has been adapted for Swiss needs according to the perception of decision makers on problems that require solution in a Swiss context. NPM has developed, therefore, into rather different models in practice, aimed at the solution of these diverse problems. Foreign examples, such as the Dutch Tilburg Model and the German Neues Steuerungsmodell, played a major role at the start of this process, but have continuously lost their influence as actual models to be emulated. The most outstanding peculiarities of the Swiss reforms are an early and subsequent outcome focus together with the strong influence of direct democracy.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 51
    Electronic Resource
    Electronic Resource
    Oxford, UK and Boston, USA : Blackwell Publishing Ltd
    Public administration 81 (2003), S. 0 
    ISSN: 1467-9299
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: This article, part of a sequence of comparative articles on local government reforms in The Netherlands, Switzerland and Germany, describes and analyses the recent public management reforms at the local level of Germany. After an overview about the constitutional framework of local self government and the reform waves of the last decades, the paper concentrates on the ‘new steering model’ as the German variant of NPM. The article shows the short history of this reform movement, describes the main elements of the reform concept and explains some of the causes, forces and actors of implementation. It goes on to discuss the present status of implementation, explains several shortcomings of the concept, and presents the – very limited – empirical evidence of achieved results. Finally, the paper draws some conclusions from a comparative view on the similarities and differences of local management reforms in Germany and the two other countries.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 52
    Electronic Resource
    Electronic Resource
    Oxford, UK and Boston, USA : Blackwell Publishing Ltd
    Public administration 81 (2003), S. 0 
    ISSN: 1467-9299
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: Books reviewed in this article:B. Guy Peters and Jon Pierre (eds.), Politicians, bureaucrats and administrative reformHugh Atkinson and Stuart Wilks-Heeg, Local government from Thatcher to Blair: the politics of creative autonomyAlex Wright (ed.), Scotland: the challenge of devolutionChristopher Hood, Henry Rothstein and Robert Baldwin, The government of risk: understanding risk regulation regimesAlison Young, The politics of regulation: privatized utilities in Britain
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 53
    Electronic Resource
    Electronic Resource
    Oxford, UK and Boston, USA : Blackwell Publishing Ltd
    Public administration 81 (2003), S. 0 
    ISSN: 1467-9299
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: The United States is commonly referred to as the last global superpower, exercising unrivalled political, economic, military and social influence. Yet, paradoxically, unlike any other nation, Americans were – and remain – radically antistatist. Until roughly the twentieth century the United States did not want, need, nor create a powerful administrative state to govern itself, let alone others abroad. This essay explores that peculiar paradox, namely how Americans govern as the last global superpower today, yet retain an inherently fierce hostility to government. The thesis that is developed argues that it is a deep–rooted reformist faith which ultimately shapes US statecraft as a unique style of reformcraft, with both benign and not–sobenign consequences.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 54
    Electronic Resource
    Electronic Resource
    Oxford, UK and Boston, USA : Blackwell Publishing Ltd
    Public administration 81 (2003), S. 0 
    ISSN: 1467-9299
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: To understand governance, we ask who is telling the story from within which tradition. We argue there is no essentialist notion of governance but at least four conceptions each rooted in a distinctive tradition. The first section of the paper describes the relevant traditions: Tory, Liberal, Whig and Socialist. The second section describes the different notions of governance associated with each tradition; intermediate institutions, marketizing public services, reinventing the constitution and trust and negotiation. We explain these distinct conceptions of governance as responses to the dilemmas of inflation and state overload. In the conclusion, we summarize how and why traditions change, concluding, there is no such thing as governance, but only the differing constructions of the several traditions.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 55
    Electronic Resource
    Electronic Resource
    Oxford, UK and Boston, USA : Blackwell Publishing Ltd
    Public administration 81 (2003), S. 0 
    ISSN: 1467-9299
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: The article explores the evolution of competing views on state, administration and governance in Germany from an historical perspective, with an emphasis on the last five decades. To understand the governance discourse in Germany one has to start from different notions of the state. The first part therefore offers a brief, somewhat polemic, overview about different state traditions in Germany in the twentieth and twenty–first centuries. The second part looks at how discourses about the proper role, the appropriate structures and processes of the public sector and its interactions with its environment have changed during the history of the Federal Republic. The analytic focus is on the different narratives about administrative policies, understood as the various scenarios, assumptions and arguments on which competing policy–suggestions for the public sector have been based. The article argues that it is not sufficient to interpret the ups and downs of different discourses and Leitbilder as more or less erratic, post–modern fashions and fads. Instead, the line up of the central catch–phrases, from democratic via active and lean to the activating state, reflect learning processes, driven above all by the political competition creating a continuous demand for ‘better’, more appropriate narratives to guide and explain current policies.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 56
    Electronic Resource
    Electronic Resource
    Oxford, UK and Boston, USA : Blackwell Publishing Ltd
    Public administration 81 (2003), S. 0 
    ISSN: 1467-9299
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: This article explores the basic traditions of governance in contemporary France and the narratives of public sector reform associated with them. It should be stressed right from the outset that this article does not aim to describe the set of public sector reforms that have been implemented in France in the last ten years or so. Instead, the aim is to demonstrate the similarities and differences between the narratives of the left and the right with regard to these reforms and to show how these narratives help to explain the types of reform that have been enacted. The basic argument is that there is a certain commonality to both the left and the right with regard to their narratives of public sector reform. At the same time, though, there are differences of emphasis both within each tradition and between the two main traditions themselves. Except where indicated, all translations are the author's own.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 57
    Electronic Resource
    Electronic Resource
    Oxford, UK and Boston, USA : Blackwell Publishing Ltd
    Public administration 81 (2003), S. 0 
    ISSN: 1467-9299
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: This article revisits the country case studies and seeks to answer two questions. What are the strengths and weaknesses of an interpretive approach? What lessons can we draw from our analysis of public sector reform? To assess an interpretive approach, we discuss: the issues raised in identifying beliefs; the meaning of explanation; how to select traditions; the shift from prediction to informed conjecture and policy advice as storytelling. To assess the lessons, we outline our preferred story of public sector reform. We seek to show that an interpretive approach produces insights for students of public administration. We argue it remains feasible to give policy advice to public sector managers by telling them stories and providing rules of thumb (proverbs) to guide managerial practices.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 58
    Electronic Resource
    Electronic Resource
    Oxford, UK and Boston, USA : Blackwell Publishing Ltd
    Public administration 81 (2003), S. 0 
    ISSN: 1467-9299
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: Compared to other continental European countries, especially Germany and Switzerland, which have experimented with New Public Management (NPM) in local government, The Netherlands has been relatively quick in following trends stemming from Anglo-Saxon management thinking, but also relatively quick in redressing its course. The rise of the New Public Management in Dutch local government has been relatively swift and strong but also relatively superficial and non-committal. The dominant picture that emerges is one of an administrative system that, while responsive to the latest trends, is also surprisingly stable. Management reforms, forcefully advocated in the 1980s, were decisively revised and redressed in the 1990s, with the city of Tilburg, celebrated for its ‘Tilburg Model’, a case in point. The Werdegang of NPM (that is, how things developed) in Dutch local government, detailed in this article, can be understood only partially as a result of changing economic and budgetary constraints. The article shows that endogenous features of the Dutch politico-administrative system – more specifically: the compact, dense and decentralized pattern of the intergovernmental network, the administrative tradition of pragmatism, dynamic conservatism and the comparatively technocratic character of local government – have also strongly influenced the reception, effect and correction of NPM in Dutch local government.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 59
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Fatigue & fracture of engineering materials & structures 20 (1997), S. 0 
    ISSN: 1460-2695
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract— This paper examines the application of the Jk, L and M integrals, in complex-variable form, to the Boussinesq wedge. The wedge is symmetrical and subjected to a point couple and point forces at the apex of the wedge. In the case of a point couple acting at the wedge apex the Jy, L and M integrals are found to vanish for all wedge angles whereas Jx displays a 1/r3 path-dependence; where r is a radial dimension measured from the wedge apex. When the wedge is subjected to point forces at the wedge apex then Jx and Jy are 1/r path-dependent whereas L and M are path-independent.The property that the L and M integrals are path-independent for the Boussinesq wedge is applied to the problem of determining the modes I and II stress intensity factors for a corner-loaded edge crack in a half-plane subjected to both normal and parallel point forces to the free surface of the half-plane.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 60
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Fatigue & fracture of engineering materials & structures 20 (1997), S. 0 
    ISSN: 1460-2695
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract— Fatigue tests were performed on thin-walled tubular specimens of S45C steel under tension-compression, pure torsion, in-phase and out-of-phase axial-torsional loadings. The relationship between cracking behaviour and stress components on the crack plane was investigated. Measurement of microcrack density showed that microcracking was governed predominantly by the shear stress amplitude acting on the crack plane for all loading conditions. The failure crack was formed by coalescence of many cracks initiated near the maximum shear planes. The cracks grew turning their orientation to the direction perpendicular to the maximum normal stress. The transition of crack orientation occurred at relatively longer crack lengths at a higher stress ratio. The crack growth behaviour for all loading modes can be correlated using an equivalent strain intensity parameter based on shear and normal strains on the crack plane.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 61
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Fatigue & fracture of engineering materials & structures 20 (1997), S. 0 
    ISSN: 1460-2695
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract— A ductile medium strength steel has been modelled by means of the Gurson model, and been used to investigate the effect of crack tip constraint in several fracture mechanics specimens. Both numerical and experimental results have been obtained, in the course of the crack extension process, for single edge notch bending specimens with different crack length-to-width ratios. The geometries with the shorter cracks always exhibited higher J values at initiation and steeper J crack growth resistance curves, and these results have been explained in terms of the stress and strain fields and damage development in the region ahead of the crack tip.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 62
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Fatigue & fracture of engineering materials & structures 20 (1997), S. 0 
    ISSN: 1460-2695
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract— It is shown that autofrettage at low temperatures is superior to autofrettage at room temperature in enhancing the fatigue resistance of thick-walled tubes against pulsating internal pressure. The physical reason is based on the well-known temperature dependence of the mechanical behaviour of metals and alloys which generally exhibit an enhancement of both the yield stress and strain hardening behaviour at lower temperatures. As a consequence, significantly larger compressive residual hoop stresses can be introduced during pressurization at low temperatures than at room temperature. Experimental data obtained on thick-walled tubes of the metastable austenitic stainless steel AISI 304 L which were subjected to pulsating internal pressure at room temperature after autofrettage at temperatures between-110°C and room temperature are presented. These data demonstrate convincingly the advantages offered by low-temperature autofrettage in enhancing both the fatigue life in the finite-life region and the fatigue endurance limit in comparison with autofrettage at room temperature. In conclusion, some specific materials requirements for optimum low-temperature autofrettage performance are discussed.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 63
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Fatigue & fracture of engineering materials & structures 20 (1997), S. 0 
    ISSN: 1460-2695
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract— A new single-specimen testing method, the normalization method with the so-called LMN calibration function, based on the load separation principle and function calibrations from an individual test record, was used to construct J-R curves directly from load versus load-line displacement records without any additional on-line crack-length monitoring equipment. The research was done on CT-specimens of a glassy polymer PVC at different crosshead speeds ranging from 0.01 to 50 mm/min. The J-R curves evaluated from the normalization method are in good agreement with those from the conventional multiple-specimen testing method in the whole range of the tested crosshead speeds. The results demonstrated the applicability of the normalization method for developing J-R curves at different crosshead speeds in PVC. The crack initiation J-integral values, J0.2, showed a two-regime dependence on the crosshead speeds in the tested crosshead speed range.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 64
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Fatigue & fracture of engineering materials & structures 20 (1997), S. 0 
    ISSN: 1460-2695
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract— Biaxial fatigue tests were conducted on a high strength spring steel using hour-glass shaped smooth specimens. Four types of loading system were employed, i.e. (a) fully reversed cyclic torsion, (b) uniaxial push—pull, (c) fully reversed torsion with a superimposed axial static tension or compression stress, and (d) uniaxial push—pull with a superimposed static torque, to evaluate the effects of mean stress on the cyclic stress—strain response and short fatigue crack growth behaviour. Experimental results indicate that a biaxial mean stress has no apparent influence on the stress—strain response in torsion, however a superimposed tensile mean stress was detrimental to torsional fatigue strength. Similarly a superimposed static shear stress reduced the push—pull fatigue lifetime. A compressive mean stress was seen to be beneficial to torsion fatigue life. The role of mean stress on fatigue lifetime, under mixed mode loading, was investigated through experimental observations and theoretical analyses of short crack initiation and propagation. Using a plastic replication technique the effects of biaxial mean stress on both Stage I (mode II) and Stage II (mode I) short cracks were evaluated and analysed in detail. A two stage biaxial short fatigue crack growth model incorporating the influence of mean stress was subsequently developed and applied to correlate data of crack growth rate and fatigue life.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 65
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Fatigue & fracture of engineering materials & structures 20 (1997), S. 0 
    ISSN: 1460-2695
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract— The development of fatigue damage in Co45Ni specimens during push—pull and reversed torsion tests, performed inside a scanning electron microscope, was observed and the different stress states compared. It appeared that transgranular crack initiation and development is delayed and intergranular crack initiation promoted under torsional loading. This was explained in terms of reduced surface distortion at the emergence of persistent slip bands (PSBs) and smaller compatibility stresses at the PSB-matrix interfaces. The influence of the mechanical strength of grain boundaries on the difference between tensile and torsional fatigue lives is discussed.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 66
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Fatigue & fracture of engineering materials & structures 20 (1997), S. 0 
    ISSN: 1460-2695
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract— A Fourier series approach is proposed to calculate stress intensity factors using weight functions for semi-elliptical surface cracks in flat plates subjected to two-dimensional stress distributions. The weight functions were derived from reference stress intensity factors obtained by three-dimensional finite element analyses. The close form weight functions derived are suitable for the calculation of stress intensity factors for semi-elliptical surface cracks in flat plates under two-dimensional stress distributions with the crack aspect ratio in the range of 0.1 ≤a/c≤ 1 and relative depth in the range of 0 ≤a/t≤ 0.8. Solutions were verified using several two-dimensional non-linear stress distributions; the maximum difference being 6%.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 67
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Fatigue & fracture of engineering materials & structures 20 (1997), S. 0 
    ISSN: 1460-2695
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract— A conventional finite element method may show a weakness when determining the hot spot stress distributions in the brace/chord intersection region of offshore tubular joints. This is because the chosen element displacement functions do not implicitly satisfy the conditions which prevail on the free surfaces. A procedure has been proposed to modify the conventional finite element method so as to allow the hot spot stresses, which occur at the free boundary of the weld toe of tubular joints, to be determined with improved accuracy. The results obtained by this modified method are compared with both an experimental and a traditional finite element solution. The comparison shows that the modified solution is in better agreement with the experimental data as compared with the traditional solution.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 68
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Fatigue & fracture of engineering materials & structures 20 (1997), S. 0 
    ISSN: 1460-2695
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 69
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Fatigue & fracture of engineering materials & structures 20 (1997), S. 0 
    ISSN: 1460-2695
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract— Simple extensions to the standard deep notch bend test procedure are suggested to allow the collection of data relevant to the energy dissipation rate, D, crack opening angle, COA, and J, all for arbitrarily large amounts of growth in extensive plasticity. The methods of analysis are detailed for real elastic-plastic behaviour of a high strength low-hardening type metal with a view to encouraging use on a wider range of materials. A proposal is made, and equations given, that the particular version of J used for an R-curve derived from the area under the loading diagram, should correspond to the value of the far-field integral, Jff.The relationship between the global measure of COA that emerges from D and the local crack tip opening angle, CTOA, as used in computational studies, is established. Transferability of CTOA data is examined in the light of effects of size and configuration. An explicit rule of the form CTOA √G =f (material and configuration) is proposed for the modelling of ductile growth in finite element studies. It is applied to a set of data in the literature, for the variation of CTOA with size in the deep notch bend test and for the configurations, bending, double edge and centre cracked tension.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 70
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Fatigue & fracture of engineering materials & structures 20 (1997), S. 0 
    ISSN: 1460-2695
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract— In this investigation the Electron Channelling Contrast (ECC) technique in scanning electron microscopy (SEM) was applied to reveal the dislocation structures in the vicinity of surface fatigue cracks in comparison to those of cyclically-deformed recrystallized polycrystalline copper. The plastic zone around a fatigue crack was found to consist of an innermost region containing cells, followed by a region containing dense veins and PSBs, surrounded by a structure of loose veins, bundles and loop patches typical of the cyclically deformed matrix. A relation between plastic strain amplitude values deduced from cyclic stress-strain investigations and the dislocation structures near fatigue cracks are given. Typical regions of damage accumulation were identified and plastic strain contours for surface fatigue cracks established. The essentially non-destructive ECC technique is particularly suited to identify the changes in mesoscopic dislocation structures from surface layers to the interior of specimens over large specimen areas.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 71
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Fatigue & fracture of engineering materials & structures 20 (1997), S. 0 
    ISSN: 1460-2695
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 72
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Fatigue & fracture of engineering materials & structures 20 (1997), S. 0 
    ISSN: 1460-2695
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract— The propagation behaviour of fatigue cracks emanating from pre-cracks was numerically simulated to evaluate the development of crack closure with crack growth. The crack opening stress intensity factor at the threshold was approximated as a function of the applied stress and the amount of crack extension. Pre-cracked specimens of a medium-carbon steel with a small surface crack and a single-edge crack were fatigued to investigate experimentally the initiation and propagation of cracks from pre-cracks. Crack closure was dynamically measured by using an interferometric strain/displacement gauge. The threshold condition of crack initiation from pre-cracks was given by a constant value of the effective stress intensity range which was equal to the threshold value for long cracks. The cyclic R-curve was constructed in terms of the threshold value of the maximum stress intensity factor as a function of crack extension approximated on the basis of the experimental and numerical results. The cyclic R-curve method was used to predict the fatigue thresholds of pre-cracked specimens. The predicted values of the fatigue limits for crack initiation and fracture, and the length of non-propagating cracks agreed very well with the experimental results.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 73
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Fatigue & fracture of engineering materials & structures 20 (1997), S. 0 
    ISSN: 1460-2695
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract— A basic study was performed on the evolution of three-dimensional shapes of small surface fatigue cracks during fatigue, and the effect of this evolution on small-crack growth behavior of a titanium-base alloy. Specifically, the nature and the magnitude of variations in crack aspect ratio, a/c (a is the crack depth and c is the half-surface crack length), during cyclic crack growth and its impact on growth rates have been studied. Experiments were performed on naturally initiated micro-cracks in a microstructure consisting of equiaxed primary-α2 phase in a Widmanstätten (transformed β) matrix. Several cracks under stress ratio (R) levels of 0.1 and −1, were studied. A specialized experimental system, consisting of a laser interferometer (to measure precisely the small-crack surface displacements), and a photo microscope (to automatically and continuously photograph the fatigue micro-cracks) was employed in the study. Apparent aspect ratios of surface cracks were calculated from the compliance response and the surface crack length data as a function of fatigue cycles. These data enabled accurate calculations of growth rates at the surface crack tip as well as the tip at depth in the bulk over the entire crack growth period, thus giving an insight into the crack growth process. Measurements of closure levels of small cracks were also performed and were used to partly account for the differences in growth rates. In the comparisons of small-crack growth data with the large-crack data, surface growth rates correlated relatively well with the large-crack data. Growth rates at depth exhibited large variations due to the irregularity of crack fronts at this location, and these rates deviated significantly from the large-crack behavior. Additionally, these growth rates varied between different cracks. An attempt was made to rationalize these observations in terms of the effects of inhomogeneities present in the microstructure.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 74
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Fatigue & fracture of engineering materials & structures 20 (1997), S. 0 
    ISSN: 1460-2695
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract— A new technique, known as crack modelling, is used here to predict fatigue failure in a crankshaft component. The technique uses a linear elastic finite element (FE) analysis to derive a stress intensity factor (K) for the component under load. The novel feature of the technique is that K is calculated without introducing a crack into a component; the stress field around the maximum stress point is examined and compared to that for a standard centre-cracked plate. The fatigue limit for a crankshaft was successfully predicted, when compared to experimental data. The only material parameter required for this prediction was the threshold stress intensity range, ΔKth.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 75
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Fatigue & fracture of engineering materials & structures 20 (1997), S. 0 
    ISSN: 1460-2695
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract— The effects of bluing, associated with drawing strain, on the fatigue strength of eutectoid steel wires have been investigated. The fatigue limit increases by bluing and the increase is more significant with higher drawing strain. The peak in the fatigue limit with regard to the drawing strain in the wires, at a strain of 2.5, disappears after bluing. On the other hand, in the ferritic steel wires investigated for comparison, the fatigue limit gradually increases with the drawing strain up to 7.7. Furthermore, no appreciable change in the fatigue limit due to bluing is found. Based on the results of hardness tests on fatigue specimens with- and without-bluing, it is deduced that the decrease of the fatigue limit beyond the peak drawing strain in the eutectoid steel wire can partly be attributed to insufficient locking of the high-density dislocations by solute atoms. The effect of relaxation of residual stress during bluing is also briefly discussed.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 76
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Fatigue & fracture of engineering materials & structures 20 (1997), S. 0 
    ISSN: 1460-2695
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract— It is well known that for very short cracks the stress intensity factor K is not a suitable parameter to estimate the stress level over the small but finite Stage II process zone activation region of size rs near the crack tip, within which crack growth events take place. A critical appreciation of the reasons for the limitations on the applicability of ΔK as a fatigue crack propagation (FCP) parameter, when the crack length a is of the same order of magnitude or smaller than the size of the ‘fatigue-fracture activation region’, rs is presented. As an alternative to ΔK the range Δσs of the cyclic normal stress at a point situated at the fixed distance s=rs/2, ahead of the crack tip, inside the fatigue-fracture activation region, is proposed. It is observed that the limitation on the use of ΔK when the crack is short, is mathematical (and not physical) but this inconvenience is easily circumvented if the stress Δσs at the prescribed distance is used instead of ΔK since nowadays Δσs can be obtained numerically by using finite element methods (FEM). It follows that the parameter Δσs is not restricted by the mathematical limitations on ΔK and so it would seem that there is, a priori, no reason why the validity of the parameter Δσs cannot be extended to short cracks. It is shown that if the Paris law is expressed in terms of Δσs (πrrs)½ instead of ΔK the validity of the modified Paris law can be extended to short cracks.A coherent estimate of the value of the fatigue-fracture activation region rs is derived in terms of the fatigue limit ΔσFL obtained from S-N tests and of the threshold value ΔKth obtained from tests on long cracks where both relate to Stage II crack growth that ends in failure, namely, rs= (ΔKth/ΔσFL)2/π. An overall, threshold diagram is presented based on the simple criterion that, for sustained Stage II FCP, Δσs must be greater than ΔσFL. The study is based on a simple continuum mechanics approach and its purpose is the investigation of the suitability of both ΔK and Δσs to characterise the crack driving force that activates complex fracture processes at the microstructure's scale. The investigation pertains to conditions that lead to the ultimate failure of the component at values of Δσs 〉 ΔσFL.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 77
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Fatigue & fracture of engineering materials & structures 20 (1997), S. 0 
    ISSN: 1460-2695
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract— The boundary value problem for an arbitrarily shaped plane crack embedded in a 3D linear elastic solid can be reduced to a governing hyper-singular integral equation. A discretizing procedure based on a triangulation of the crack area has been offered in Part I of this work. The main goal of Part I is to introduce the analytical results for the 18 resulting finite-part integrals defined over a triangular mesh area. The finite-part integrals occur in those triangles where the source point coincides with one of the element nodes. Mostly the source point lies outside of the considered triangle. In these cases the occurring area integrals are regular.The aim of Part II is, therefore, the derivation of the closed form expressions for the relevant 18 regular area integrals. The resulting relations are of algebraic form which can easily be coded in compact form. Their numerical proof by two different methods shows the highest accuracy and, therefore, the correctness of the final solutions. The relevant numerical results are offered in Appendix I.With the formulae provided in Part I and Part II of the paper the determination of the coefficient matrix, necessary for the calculation of COD values from a linear equation system, is precise and needs only minimum computer time.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 78
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Fatigue & fracture of engineering materials & structures 20 (1997), S. 0 
    ISSN: 1460-2695
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract— Circumferentially notched cylindrical specimens are tested in torsion to obtain critical J values from crack resistance curves. The specimens are explosion cladded, half ferrite, half austenite, with the interface perpendicular to the cylinder axis and the circumferential notch at, or parallel to, the interface. Critical J values for crack extension in mode III were found to be a factor 1.1 to 2.1 higher than under comparable mode I loading.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 79
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Fatigue & fracture of engineering materials & structures 20 (1997), S. 0 
    ISSN: 1460-2695
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract— Strength measurements are becoming increasingly important for electroceramics. Bending of specimens small enough to be cut out of small electroceramic components may be one possibility. Therefore the miniaturisation of the 4-point bend-test for ceramic specimens is now being attempted. In this paper the errors in determining the flexural strength arising from the test principle itself, plus the geometry and measuring inaccuracies are calculated and expressed as a function of the outer span length. Contact pressure and a tolerable total measuring inaccuracy determines the dimensions of miniature specimens and fixtures. The possibilities of appropriate specimen preparation are also investigated.Ceramic materials show a volume (i.e. a specimen size) dependence of strength which is described by Weibull's statistical theory. The applicability of the miniature bend-fixtures is demonstrated by measuring this volume effect.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 80
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Fatigue & fracture of engineering materials & structures 20 (1997), S. 0 
    ISSN: 1460-2695
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract— This paper describes a versatile technique for simulating the fatigue growth of a wide range of planar cracks of practical significance. Crack growth is predicted on a step-by-step basis from the Paris law using stress intensity factors calculated by the finite element method. The crack front is defined by a cubic spline curve from a set of nodes. Both the 1/4-node crack opening displacement and the three-dimensional J-integral (energy release rate) methods are used to calculate the stress intensity factors. Automatic remeshing of the finite element model to a new position which defines the new crack front enables the crack propagation to be followed. The accuracy and capability of this finite element simulation technique are demonstrated in this paper by the investigation of various problems of both theoretical and practical interest. These include the shape growth trend of an embedded initially penny-shaped defect and an embedded initially elliptical defect in an infinite body, the growth of a semi-elliptical surface crack in a finite thickness plate under tension and bending, the propagation of an internal crack in a round bar and the shape change of an external surface crack in a pressure vessel.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 81
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Fatigue & fracture of engineering materials & structures 20 (1997), S. 0 
    ISSN: 1460-2695
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract— Cold-expansion of fastener holes is now commonly used within the aerospace industry to increase the fatigue endurance of airframes. Although a number of methods of cold expansion are possible, the split-sleeve cold-expansion process is the most widely accepted and is frequently used in the repair and manufacture stages of both military and civil aircraft. In the present work, the redistribution of residual hoop stresses due to the application of constant amplitude fatigue loading at 4% cold-expanded holes has been studied. A modified Sachs method was adopted to evaluate the residual stress profiles and a replication technique was used to quantify crack growth. It was found that the decay of the residual hoop stress profile near the bore of the hole was due to the initiation and growth of small fatigue cracks. Cracks were found to initiate both near and below the fatigue limit, but subsequently arrested so stabilising the overall residual stress profile.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 82
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Fatigue & fracture of engineering materials & structures 20 (1997), S. 0 
    ISSN: 1460-2695
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract— The factors affecting the fatigue strength of nitrided titanium were clarified. The fatigue strength depended strongly on the fracture strength of the compound layer formed on the surface by nitriding. We found a Hall-Petch relationship between the fatigue strength of nitrided titanium and the grain size. The findings indicated that the reduction in the fatigue strength by nitriding results from both the formation of the compound layer possessing low fracture strength and grain growth occurring from ordinary nitriding. Furthermore, low-temperature nitriding (620°C, 24 h) was proposed to suppress grain growth. This treatment method improved not only the wear resistance and the corrosion resistance but also the fatigue strength of titanium.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 83
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 4 (1996), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: Boards of directors of large American corporations are marked by a surprising degree of overlap in their memberships. The median Fortune 500 firm interlocked (shared directors) with seven other large firms during the mid-1980s, although this prevalence dropped slightly by the mid-1990s. In contrast to Japan, interlocks among American firms are rarely linked to banking relationships or vertical (buyer-supplier) relationships; rather, they reflect the embeddedness of corporate governance in social structures (e.g., friendship or other ties). Recent empirical research has linked interlocks to almost every important aspect of corporate governance, from executive compensation to strategies for takeovers and defending against takeovers. These findings suggest that proposals for reforming boards of directors through changing incentive structures (e.g., paying directors in equity rather than cash) are likely to have little effect because they misconstrue the role of the board as a social institution.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 84
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 4 (1996), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: This study examines the associations between the characteristics of initial public offering (IPO) firms and the voluntary use of outside directors. Five firm characteristics are examined: inside share ownership, variance of aftermarket returns, operating history, leverage, and firm size. Based on a sample of 110 New Zealand firms which made initial public offerings of equity securities over the period 1983 to 1987, the study finds that greater variance of after-market returns and a lower inside share ownership are associated with a greater proportion of outside directors. In addition, firms without operating histories are likely to use relatively more outside directors. However, leverage and firm size are not significantly related to the proportion of outside directors. Overall, the findings from the study are generally consistent with arguments that firms with greater agency problems are likely to use relatively more outside directors because these directors are perceived to be more effective in mitigating agency problems.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 85
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 4 (1996), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: This paper seeks to identify the determinants of corporate ownership and control that emerge in regulatory environments which do not inhibit the issue of shares with differential voting rights and/or the establishment of pyramid holding companies (which serve exactly the same purpose). [Methodologically, the paper follows the seminal study of the US corporate structure by Demsetz & Lehn (1985).] Such settings tend to produce very concentrated control structures, which contrast sharply with those of the USA, the UK and Australia, where the distribution of shareholder votes in the large public corporations is relatively diffuse. Relatively lenient listing regulations have produced in South Africa a corporate landscape dominated by pyramid holding companies and multilayered diversified corporate groupings. These structures have effectively concentrated the control of most of the large public companies in the hands of a few entrepreneurial families (as well as the two large life insurance mutuals). This setting has enabled us to advance and test hypotheses about control and ownership which would be more difficult to test in a US, UK or Australian setting. Almost all the companies in our sample were found to be under the absolute control of a single identifiable shareholder coalition (usually one or two families) but the underlying percentage shareholding of the controlling group in each company was found to vary dramatically and systematically. We sought to explain that variation and to identify the role of the market as a constraint on the ability of controlling shareholders who wish to dilute their equity stake without surrendering control for the purpose of expanding their companies (without incurring additional debt) and/or diversifying their personal wealth. Demsetz & Lehn had already identified the factors that determine the demand by shareholders for equity dilution but not those constraining their ability to do so. This paper, therefore, attempts to shed light on the way in which principal/agent problems affecting shareholders and managers are resolved when one-share-one-vote is neither enforced nor encouraged by the regulatory environment.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 86
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 4 (1996), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 87
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 4 (1996), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 88
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 3 (1995), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 89
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 3 (1995), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 90
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 3 (1995), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 91
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 4 (1996), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: Executive compensation has recently become the subject of extensive scrutiny by the popular press. However, compensation for corporate directors is one area which has only received little attention or research. The present study combined resource dependence and agency theories with previous research on executive salaries to develop an explanatory model of director compensation. Data were collected from US firms at two points in time to assess the stability of these predictors. Four variables were found to have a significant relationship with director compensation: firm size, firm profitability, equity ownership by directors, and resource richness of the board. However, the explanatory power of these variables appear to decline over time. Practical implications of these results are discussed.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 92
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 4 (1996), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 93
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 4 (1996), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 94
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 4 (1996), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 95
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 1 (1993), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: This article is reproduced from NRI Quarterly Volume 1 No. 3 Winter 1992 and is reprinted by special permission of Nomura Research Institute, Ltd.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 96
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 2 (1994), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: Book Reviwes in The Article:Hilmer, Frederick G.; Strictly Boardroom – the report of an Independent Working Party into Cornorate Governance; Information Australia, Melbourne and The Sydney Institute, Sydney, AustraliaHumphrey, Christopher, Peter Moizer and Stuart Turley; The Audit Expectations Gap in the United Kingdom; The Auditing Research Foundation of the Institute of Chartered Accountants in England and Wales; LondonBosch, Henry; Bosch on Business, Information Australia, Melbourne, Australia, 1992.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 97
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 1 (1993), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 98
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 3 (1995), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Notes: This article examines the structure of boards and its effects on the performance of significant board functions. Composition of boards is measured by size, outside director representation and cognitive, as well as demographic diversity. A firm's environment, strategy, structure and culture, and factors attributed to personal characteristics of board members were viewed as important determinants affecting effectiveness of boards. Most important, decisions on board size and composition involve a trade-off between benefits of diversity and enhanced costs of group development and group decision processes.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 99
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 1 (1993), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 100
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Corporate governance 1 (1993), S. 0 
    ISSN: 1467-8683
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Political Science , Economics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...