ALBERT

Notes: Abstract An (R)-trans-2,3-enoylacyl-CoA hydratase was purified to near-homogeneity from Rhodospirillum rubrum. Protein sequencing of enriched protein fractions allowed the construction of a degenerate oligonucleotide. The gene encoding the (R)-specific hydratase activity was cloned following three rounds of colony hybridization using the oligonucleotide, and overexpression of the gene in E. coli led to the purification of the enzyme to homogeneity. The purified enzyme used crotonyl-CoA, trans-2,3-pentenoyl-CoA, and trans-2,3-hexenoyl-CoA with approximately equal specificity as substrates in the hydration reaction. However, no activity was observed using trans-2,3-octenoyl-CoA as a substrate, but this compound did partially inhibit crotonyl-CoA hydration. Based on the nucleotide sequence, the protein has a monomeric molecular weight of 15.4 kDa and is a homotetramer in its native form as determined by gel filtration chromatography and native PAGE. The hydratase was expressed together with the PHA synthase from Thiocapsa pfennigii in E. coli strain DH5α. Growth of these strains on oleic acid resulted in the production of the terpolyester poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-3-hydroxyhexanoate).

Notes: Abstract We have previously described the isolation of the new bacterial species, Ralstonia/Burkholderia sp. strain DSM 6920, which grows with 6-methylnicotinate and regioselectively hydroxylates this substrate in the C2 position by the action of 6-methylnicotinate-2-oxidoreductase to yield 2-hydroxy-6-methylnicotinate (Tinschert et al. 1997). In the present study we show that this enzymatic activity can be used for the preparation of a series of hydroxylated heterocyclic carboxylic acid derivatives. The following products were obtained from the unhydroxylated educts by biotransformation using resting cells: 2-hydroxynicotinic acid, 2-hydroxy-6-methylnicotinic acid, 2-hydroxy-6-chloronicotinic acid, 2-hydroxy-5,6-dichloronicotinic acid, 3-hydroxypyrazine-2-carboxylic acid, 3-hydroxy-5-methylpyrazine-2-carboxylic acid and 3-hydroxy-5-chloropyrazine-2-carboxylic acid. Thus the respective educts were all regioselectively mono-hydroxylated at the carbon atom between the ring-nitrogen and the ring-carbon atom carrying the carboxyl group. In contrast to its relatively broad biotransformation abilities, the strain shows a limited heterocyclic nutritional spectrum. It could grow only with three of the seven transformed educts: 6-methylnicotinate, 2-hydroxy-6-methylnicotinate and 5-methylpyrazine-2-carboxylate. 2-Hydroxynicotinate, 2-hydroxy-6-chloronicotinate, 2-hydroxy-5,6-dichloronicotinate, 3-hydroxypyrazine-2-carboxylate and 3-hydroxy-5-chloropyrazine-2-carboxylate were not degraded by the strain. Therefore, unlike 6-methylnicotinate-2-oxidoreductase, which has a broad substrate spectrum, the second enzyme of the 6-methylnicotinate pathway seems to have a much more limited substrate range. Among 28 aromatic heterocyclic compounds tested as the sole source of carbon and energy, only pyridine-2,5-dicarboxylate was found as a further growth substrate, and this was degraded by a pathway which did not involve 6-methylnicotinate-2-oxidoreductase. To the best of our knowledge the microbial production of 2-hydroxy-6-chloronicotinic acid, 2-hydroxy-5,6-dichloronicotinic acid and 3-hydroxy-5-methylpyrazine-2-carboxylic acid have not been reported before. Strain DSM 6920 is so far the only known strain which allows the microbial production of both these compounds and 3-hydroxypyrazine-2-carboxylic acid and 3-hydroxy-5-chloroypyrazine-2-carboxylic acid.

Notes: Abstract An industrial strain of Penicillium chrysogenum was subjected to carbon or nitrogen limitation in a chemostat and the response monitored in terms of the “classical” indicators of autolysis (biomass decline and ammonia release), culture degradation (as measured by image analysis) and by obtaining profiles for three classes of proteases implicated in autolysis. Under both sets of conditions (carbon or nitrogen limitation), once started, autolysis involved a succession of different protease activities. The first stages of the process of autolysis in starved chemostat cultures was associated with peaks in the activities of both serine and aspartyl proteases, coinciding with the mobilisation of endogenous energy reserves. Conversely, a peak in the activity of metalloproteases was associated with the later stages of autolysis, perhaps occurring in response to depletion of endogenous energy reserves; the activity of these enzymes led to gross culture degradation, disintegration of ordered mycelial structures and signalled the end of metabolic activity (respiration) within the culture. These findings indicate that strategies intended to control/regulate autolysis in large-scale industrial fungal cultures might profitably be focused on regulation of the activity of key classes of proteases involved in the series of events leading to culture degradation.

Notes: Abstract A large-scale production system of cytidine 5′-monophospho-N-acetylneuraminic acid (CMP-NeuAc) and sialyloligosaccharides was established by a whole-cell reaction through the combination of recombinant Escherichia coli strains and Corynebacterium ammoniagenes. For the production of CMP-NeuAc, two recombinant E. coli strains were generated that overexpressed the genes of CMP-NeuAc synthetase and CTP synthetase, respectively. C. ammoniagenes contributed to the formation of UTP from orotic acid. CMP-NeuAc was accumulated at 27 mM (17 g/l) after a 27-h reaction starting with orotic acid and N-acetylneuraminic acid. When E. coli cells that overexpressed the α-(2 → 3)-sialyltransferase gene of Neisseria gonorrhoeae were put into the CMP-NeuAc production system, 3′-sialyllactose was accumulated at 52 mM (33 g/l) after an 11-h reaction starting with orotic acid, N-acetylneuraminic acid, and lactose. Almost no oligosaccharide byproducts other than 3′-sialyllactose were observed after the reaction. The production of 3′-sialyllactose at a 5-l jar fermenter scale was almost the same as that at a beaker scale, which indicated the high potential of the 3′-sialyllactose production on an industrial scale.

Notes: Abstract The influence of the nitrogen source on the α-amylase productivity of Aspergillus oryzae was quantified in continuous cultivations. Both inorganic and complex nitrogen sources were investigated and glucose was used as the carbon and energy sources. For production of α-amylase, nitrate was shown to be inferior to ammonia as a nitrogen source. A mixture of ammonia and complex nitrogen sources, such as yeast extract or casein hydrolysate, was better than with ammonia as the sole nitrogen source. Even a low concentration of casein hydrolysate (0.05 g l−1) resulted in a 35% increase in the α-amylase productivity. The higher α-amylase productivity during growth on casein hydrolysate was not caused by increased transcription of the α-amylase genes but was caused by a faster secretion of α-amylase or by a lower binding of α-amylase to the biomass.

Notes: Abstract Biohydroxylation of 2-cyclopentyl-1,3-benzoxazole with the filamentous fungus Cunninghamella blakesleeana DSMZ 1906 was studied in a 15-l stirred tank reactor. The aim of the work was to avoid substrate limitation through sub-optimal mixing by formation of pellets with a uniform pellet size distribution of 250–500 μm, obtained at an inoculum concentration of 107 spores ml−1 and an agitation rate of 390 rpm. Due to the high toxicity of the educt, 2-cyclopentyl-1,3-benz- oxazole, on the fungus, the medium composition, the time of educt addition, and the educt starting concentration were optimized to reach high educt tolerance and hydroxylation activity. A good maintenance of biotransformation capacity was obtained without excessive loss of activity of the biocatalyst by addition of 30 mg 2-cyclopentyl-1,3-benzoxazole/g biomass (cell dry mass) during the stationary phase in a medium which was optimized in batch fermentations with experimental designs. An increase in product yield and quality (enantiomeric excess) was achieved by developing feeding strategies combining the educt and medium components. The resulting fermentation broth contained 450 mg l−1 of the product (1S,3S)-3-(benz-1,3-oxazol- 2-yl)cyclopentan-1-ol with an enantiomeric excess of 95%, which represents a 48% increase over former reported results.

Notes: Abstract The sensitivity of industrial strains Acetobacter aceti, Gluconobacter frateurii, and Propionibacterium acidipropionici to osmotic stress was studied. Growth of A. aceti and G. frateurii was totally inhibited at 0.4 M NaCl concentration, but P. acidipropionici was able to grow on a medium containing 1.2 M NaCl. Addition of glycine betaine to the medium had no detectable osmoprotective effect on A. aceti and G. frateurii cultivations in elevated NaCl concentrations, but it enabled cells of P. acidipropionici to achieve faster the maximum specific growth rate after the prolonged lag phase and therefore to gain faster the final biomass and product concentrations. The final concentrations of biomass and product of P. acidipropionici were the same as for the cultivations of the bacterium without NaCl and glycine betaine present in the medium. Intracellular accumulation of glycine betaine was detected in P. acidipropionici cells cultivated in the medium containing glycine betaine. The amount accumulated increased with NaCl concentration, suggesting that glycine betaine plays an important role in the osmoadaptation.

Notes: Abstract The active efflux system contributing to the solvent tolerance of Pseudomonas putida S12 was characterized physiologically. The mutant P. putida JK1, which lacks the active efflux system, was compared with the wild-type organism. None of 20 known substrates of common multi-drug-resistant pumps had a stronger growth-inhibiting effect on the mutant than on the wild type. The amount of [14C]toluene accumulating in P. putida S12 increased in the presence of the solvent xylene and in the presence of uncouplers. The effect of uncouplers confirms the proton dependency of the efflux system in P. putida S12. Other compounds, potential substrates for the solvent pump, did not affect the accumulation of [14C]toluene. These results show that the efflux system in P. putida S12 is specific for organic solvents and does not export antibiotics or other known substrates of multi-drug-resistant pumps.

Notes: Abstract A model predicting the acidifying activity of mixed cultures of lactic acid bacteria and based on the lack of interaction between the strains has been investigated to identify interacting cultures. Three mixed cultures with Streptococcus thermophilus TH3 and ST7 and Lactobacillus delbrueckii ssp. bulgaricus LB10 were grown on milk. The acidifying activities of the two mixed cultures TH3/LB10 and TH3/ST7 were predicted accurately by the model, with mean prediction errors of 7.7% and 14.1%, respectively. However, the model underestimated the acidifying activity of the mixed culture ST7/LB10, with a mean prediction error of 43.5%, which provides evidence of positive interaction between the strains ST7 and LB10 during acidification.

Notes: Abstract Our previous study showed that an activated-sludge process broke down at the phenol-loading rate of 1.5 g l−1 day−1, when non-flocculating bacteria (called R6T and R10) overgrew the sludge, resulting in a sludge washout. In this study, we attempted to circumvent this breakdown problem by reclaiming the consortium structure. Activated sludge was fed phenol, and the phenol-loading rate was increased stepwise from 0.5 g l−1 day−1 to 1.0 g l−1 day−1 and then to 1.5 g l−1 day−1. Either galactose or glucose (at 0.5 g l−1 day−1) was also supplied to the activated sludge from the phenol-loading rate of 1.0 g l−1 day−1. Pure culture experiments have suggested galactose to be a preferential substrate for a floc-forming bacterium (R6F) that predominantly degrades phenol under low phenol-loading conditions. Supplying galactose allowed sustainment of the R6F population and suppression of the overgrowth of R6T and R10 at the phenol-loading rate of 1.5 g l−1 day−1. This measure allowed the activated-sludge process to treat phenol at a phenol-loading rate up to 1.5 g l−1 day−1, although it broke down at 2.0 g l−1 day−1. In contrast, supplying glucose reduced the R6F population and allowed the activated-sludge process to break down at the phenol-loading rate of 1.0 g l−1 day−1. This study demonstrated that reclamation of the activated-sludge consortium by selective biostimulation of the floc-forming population improved the phenol-treating ability of the process.

Notes: Abstract The biological upgrading of wheat straw with Streptomyces cyaneus was examined through the analysis of chemical and structural changes of the transformed substrate during solid-state fermentation. Analysis of enzymes produced during the growth of S. cyaneus showed that phenol oxidase was the predominant enzyme. The reduction in Klason lignin content (16.4%) in the transformed substrate indicated the ability of this strain to delignify lignocellulose residues and suggests a role for phenol oxidase in the bacterial delignification process. Microscopic examination of the transformed substrate showed that the initial attack occurred at the less lignified cell walls (phloem and parenchyma), while xylem and sclerenchyma were slowly degraded. The pattern of degradation of sclerenchymatic tissues by S. cyaneus showed delamination between primary and secondary walls and between S1 and S2 due to partial removal of lignin. In the later stages of the decay a disorganization of the secondary walls was detected on account of fibrillation of this layer. A comparison of the properties of the pulp from wheat straw transformed by S. cyaneus with untreated wheat straw showed that pretreatment improved the characteristics that determine the quality of pulp. This was indicated by an increase in pulp brightness and by a decrease in the kappa number. These changes occurred without significantly affecting the viscosity, a measure of the quality of the cellulose fibres. These results support the potential application of this organism or its oxidative enzymes in biopulping.

Notes: Abstract The facultative methylotrophic yeasts Candida boidinii, Pichia methanolica, Pichia pastoris and Hansenula polymorpha have been developed as systems for heterologous gene expression. They are based on strong and regulatable promoters for expression control derived from methanol metabolism pathway genes. An increasing number of biotechnological applications attest to their status as preferred options among the various gene expression hosts. The well-established P. pastoris and H. polymorpha systems have been utilized in especially competitive and consistent industrial-scale production processes. Pharmaceuticals and technical enzymes produced in these methylotrophs have either already entered the market or are expected to do so in the near future. The article describes the present status of the methylotrophic yeasts as expression systems, focusing on applied examples of the recent past.

Notes: Abstract Pyranose oxidases are widespread among lignin-degrading white rot fungi and are localized in the hyphal periplasmic space. They are relatively large flavoproteins which oxidize a number of common monosaccharides on carbon-2 in the presence of oxygen to yield the corresponding 2-keto sugars and hydrogen peroxide. The preferred substrate of pyranose oxidases is d-glucose which is converted to 2-keto-d-glucose. While hydrogen peroxide is a cosubstrate in ligninolytic reactions, 2-keto-d-glucose is the key intermediate of a secondary metabolic pathway leading to the antibiotic cortalcerone. The finding that 2-keto-d-glucose can serve as an intermediate in an industrial process for the conversion of d-glucose into d-fructose has stimulated research on the use of pyranose oxidases in biotechnical applications. Unique catalytic potentials of pyranose oxidases have been discovered which make these enzymes efficient tools in carbohydrate chemistry. Converting common sugars and sugar derivatives with pyranose oxidases provides a pool of sugar-derived intermediates for the synthesis of a variety of rare sugars, fine chemicals and drugs.

Notes: Abstract The archetypal white-rot fungus Phanerochaete chrysosporium has been shown to degrade a variety of persistent environmental pollutants. Many of the enzymes responsible for pollutant degradation, which are normally involved in the degradation of wood, are extracellular. Thus, P. chrysosporium is able to degrade toxic or insoluble chemicals more efficiently than other microorganisms. P. chrysosporium has a range of oxidative and reductive mechanisms and uses highly reactive, nonspecific redox mediators which increase the number of chemicals that can be effectively degraded. This review gives an overview of the enzymes that are believed to be important for bioremediation and briefly discusses the degradation of some individual chemicals.

Notes: Abstract A gene encoding the sweet-tasting protein thaumatin (tha) with optimized codon usage was expressed in Aspergillus awamori. Mutants of A. awamori with reduced proteolytic activity were isolated. One of these mutants, named lpr66, contained an insertion of about 200 bp in the pepA gene, resulting in an inactive aspergillopepsin A. In vitro thaumatin degradation tests confirmed that culture broths of mutant lpr66 showed only a small thaumatin-degrading activity. A. awamori lpr66 has been used as host strain for thaumatin expression cassettes containing the tha gene under the control of either the cahB (cephalosporin acetylhydrolase) promoter of Acremonium chrysogenum or the gdhA (glutamate dehydrogenase) promoter of Aspergillus awamori. Residual proteolytic activities were repressed by using a mixture of glucose and sucrose as carbon sources and l-asparagine as nitrogen source. Degradation of thaumatin by acidic proteases was prevented by maintaining the pH value at 6.2 in the fermentor. Expression of cassettes containing the gdhA promoter was optimal in ammonium sulfate as nitrogen source, whereas transformants expressing the tha gene from the cahB promoter yielded higher thaumatin levels using l-asparagine as nitrogen source. Under optimal fermentation conditions, yields of 105 mg thaumatin/l were obtained, thus making this fermentation a process of industrial interest.

Notes: Abstract The nucleotide sequence of a 3240-bp genomic fragment including the γ-actin-encoding gene from Acremonium chrysogenum has been determined, showing an open reading frame of 1691 bp, interrupted by five introns with fungal consensus splice-site junctions. The untranslated regions of the actA gene contain a consensus TATA box, a CCAAT motif, pyrimidine stretches and the polyadenylation sequence AATAA. The predicted protein (375 amino acids) revealed high identity to γ-actins from fungi (〉90%). Gene phylogenies constructed using DNA and protein sequences support the grouping of A. chrysogenum actin close to those from the majority of the filamentous fungi. The actA gene is present as a single copy in the genome of A. chrysogenum; and its expression level, opposite to pcbC and cefEF cephalosporin biosynthetic genes, was steady during cephalosporin fermentation, showing a single 1.4-kb transcript.

Notes: Abstract The dicarboxylic acid fumarate is an important intermediate in cellular processes and also serves as a precursor for the commercial production of fine chemicals such as l-malate. Yeast species differ remarkably in their ability to degrade extracellular dicarboxylic acids and to utilise them as their only source of carbon. In this study we have shown that the yeast Candida utilis effectively degraded extracellular fumarate and l-malate, but glucose or other assimilable carbon sources repressed the transport and degradation of these dicarboxylic acids. The transport of both dicarboxylic acids was shown to be strongly inducible by either fumarate or l-malate while kinetic studies suggest that the two dicarboxylic acids are transported by the same transporter protein. In contrast, Schizosaccharomyces pombe effectively degraded extracellular l-malate, but not fumarate, in the presence of glucose or other assimilable carbon sources. The Sch. pombe malate transporter was unable to transport fumarate, although fumarate inhibited the uptake of l-malate.

Notes: Abstract Growth parameters, ligninolytic enzyme activities and ability to degrade polycyclic aromatic hydrocarbons by the fungus Irpex lacteus were characterized and compared with those of other white rot fungi capable of rapid decolorization of poly R-478 and Remazol Brilliant Blue R dyes. I. lacteus was able to grow on mineral and complex media and efficiently colonized sterile and non-sterile soil by exploratory mycelium growing from a wheat straw inoculum. In shallow stationary cultures growing on high nitrogen mineral medium containing 45 mM ammonium as nitrogen source, the fungus produced lignin peroxidase (LIP), Mn-dependent peroxidase (MnP) and laccase simultaneously, the respective maximal activities of 70, 970 and 36 U/l being attained around day 18. Growing in nitrogen-limited medium (2.4 mM ammonium), no LIP was formed and levels of MnP and laccase decreased significantly. During growth in sterile soil, the fungus synthesized LIP and laccase but not MnP. I. lacteus efficiently removed three- and four-ringed PAHs from liquid media and artificially spiked soil. The variety of ligninolytic enzymes, robust growth, capability of soil colonization and resistance to inhibitory action of soil bacteria make I. lacteus a suitable fungal organism for use in bioremediation.

Notes: Abstract The efficiency of surfactant application to improve or inhibit metal solubilization and sulfur oxidation kinetics during the bioleaching of heavy metal-contaminated sediments was studied in suspension-leaching experiments. The river sediment used contained large amounts of fine particles and organic matter. Three types of surfactants were tested: sodium dodecylsulfate (SDS), a C12/14-alkanolethoxylate (Präwozell F1214/5N), and a wettable sulfur (Netz- schwefel 80 WP). Adding 10 mmol SDS/l led to transient inhibition of acidification, metal solubilization and sulfur oxidation. Inhibiting bioleaching for just 14 days required about ten times more SDS than the amount used for mine waste mitigation. The use of Präwozell resulted in poor inhibition; and using of wettable sulfur did not improve leaching efficiency. The bulk of these surfactants was sorbed onto the solid particles immediately on application, while the remainder in the aqueous phase disappeared within a few days.

Notes: Abstract Growth of Streptomyces hygroscopicus under conditions of simulated microgravity in a rotating-wall bioreactor resulted in a pellet form of growth, lowered dry cell weight, and inhibition of rapamycin production. With the addition of Teflon beads to the bioreactor, growth became much less pelleted, dry cell weight increased but rapamycin production was still markedly inhibited. Growth under simulated microgravity favored extracellular production of rapamycin, in contrast to a greater percentage of cell-bound rapamycin observed under normal gravity conditions.

Notes: Abstract The entomopathogenic nematode–bacterium complex Heterorhabditis megidis–Photorhabdus luminescens was cultured in 10-l internal loop bioreactors with marine impellers at aeration rates of 0.3 vvm and 0.7 vvm. Process parameters like impeller velocity and oxygen saturation were controlled at equal set points. The bacterial density was assessed at 24 h. Nematode dauer juveniles (DJ) were then inoculated and the development to adults after 8 days and final DJ yields after 16 days were recorded. The bacterial population density and the nematode inoculum development was variable and was not influenced by the aeration rate. A significant effect on the yield was recorded at the highest aeration rate. This result was confirmed by a direct comparison in two 5-l internal loop glass bioreactors at 0.3 vvm and 1.0 vvm, which were inoculated with nematode and bacterium pre-cultures from the same flask culture. Possible reasons for the positive correlation between aeration rate and DJ yield are discussed.

Notes: Abstract  Homocitrate synthase activity (encoded by the lys1 gene) catalyzes the first step of the lysine and penicillin pathway and is highly sensitive to feedback regulation by l-lysine. The transcript levels of the lys1 gene and the homocitrate synthase activity are high during the growth phase and decrease during the antibiotic production phase, except in the high penicillin producer strain AS-P-99 which maintained high levels of homocitrate synthase activity in cultures at 96 h and 120 h. The lys1 gene was overexpressed in Penicillium chrysogenum using additional copies of lys1 with its own promoter or under the control of the pcbC promoter in either autonomously replicating or integrative vectors. Transformants containing 3 to 32 additional copies of the lys1 gene were selected. Some of these transformants, particularly Ti-c4 (integrative) and Tar-l9 (with autonomously replicating plasmids) showed very high levels of lys1 transcript and, in the case of Tar-l9, high levels of homocitrate synthase activity in cultures of 120 h. However, these transformants did not show increased α-aminoadipate or lysine pools. A mutant P. chrysogenum L−G− disrupted in the lys2 gene (therefore lacking the lysine branch of the pathway) showed increased α-aminoadipate levels and produced higher levels of penicillin than non-disrupted control strains. Overexpression of the lys1 gene in the L−G− mutant resulted in high homocitrate synthase levels but no additional increase of the α-aminoadipate pool or penicillin production levels. These results suggest that after amplification of the homocitrate synthase levels there are other limiting steps in the common stem of the lysine and penicillin pathways.

Notes: Abstract  Organophosphorus hydrolase (OPH) is capable of degrading a variety of pesticides and nerve agents. We have developed a versatile monitoring technique for detecting the amount of OPH during the expression and purification steps. This involves fusion of the gene for green fluorescent protein (GFP) to the 5′ end of the OPH gene and subsequent expression in Escherichia coli. The synthesized fusion protein was directly visualized due to the optical properties of GFP. Western blot analyses showed that the correct fusion protein was expressed after IPTG-induction. Also, the in vivo GFP fluorescence intensity was proportional to the OPH enzyme activity. Moreover, the OPH, which forms a dimer in its active state, retained activity while fused to GFP. Enterokinase digestion experiments showed that OPH was separated from the GFP reporter after purification via immobilized metal affinity chromatography, which in turn was monitored by fluorescence. The strategy of linking GFP to OPH has enormous potential for improving enzyme production efficiency, as well as enhancing field use, as it can be monitored at low concentrations with inexpensive instrumentation based on detecting green fluorescence.

Notes: Abstract One way of improving heterologous protein production is to use high cell density systems, one of the most attractive being the flocculating yeast production system. Also, lactose is available in large amounts as a waste product from cheese production processes. The construction of flocculent and non-flocculent brewer's yeast strains secreting β-galactosidase and growing on lactose is presented. A plasmid was constructed coding for an extracellular β-galactosidase of Aspergillus niger and having, as selective marker, the yeast CUP1 gene conferring resistance to copper. This selective marker allows for the transformation of wild-type yeasts. This work represents an important step towards the study of heterologous protein secretion by flocculent cells.

Notes: Abstract  Lignin-degrading manganese (II) peroxidase (MnP) purified from the culture of a wood-rotting basidiomycete, Bjerkandera adusta, was used in the polymerization of guaiacol. MnP was found to catalyze polymerization of guaiacol in 50% aqueous acetone, dimethyl formamide, methanol, ethanol, dioxane, acetonitrile, ethylene glycol and methylcellosolve. Maximum yield of polyguaiacol was achieved in 50% aqueous acetone. The weight average molecular weight (M w) of the polymer was estimated to be 30 300 by gel permeation chromatography. However, matrix-assisted laser desorption ionization time of flight mass spectroscopy (MALDI-TOF-MS) analysis gave a more reliable M w of 1690. IR, 13C-NMR, MALDI-TOF-MS and pyrolysis GC-MS analyses showed the presence of C–C and C–O linkages and quinone structure in polyguaiacol. It was also indicated that polyguaiacol has a methoxy-phenyl group as the terminal moiety. This suggests that polyguaiacol is a branched polymer in which guaiacol units are cross-linked at the phenolic group. Thermal gravimetric and differential scanning calorimetric analyses were also carried out. MnP also catalyzed the polymerization of o-cresol, 2,6-dimethoxyphenol and other phenolic compounds and aromatic amines. M w of these polymers ranged from around 1000 to 1500.

Notes: Abstract Limited feeding of nitrate during culture of Nannochloris sp. UTEX LB1999 for intracellular lipid and triglyceride accumulation was investigated with the aim of obtaining cells superior for liquefaction into a fuel oil. The intracellular lipid contents and the percentage of triglycerides in the lipids of cells grown in a nitrogen-limited medium (0.9 mM KNO3) were 1.3 times as high as those grown in a modified NORO medium containing 2.0–9.9 mM KNO3. However, the cell concentration was too low for the practical production of fuel oil by high-pressure liquefaction of the cell mass. A single feeding of 0.9 mM nitrate after nitrate depletion during cultivation in a nitrate-limited medium increased the cell concentration to twice that obtained without such feeding, and the lipid content was maintained at a high level. The timing of nitrate feeding, i.e., whether it was given during the log phase (before nitrate depletion), the constant growth phase (just after the depletion), or the stationary phase (after the depletion), had negligible effect on the intracellular lipid content and percentage of triglycerides in the lipids. When 0.9 mM nitrate was intermittently fed ten times during the log phase in addition to the initial nitrate feed (0.9 mM), the cell concentration reached almost the same (2.16 g/l) and the intracellular lipid content and the percentage of triglycerides in the lipids increased from 31.0 to 50.9% and 26.0 to 47.6%, respectively, compared with those of cells cultured in a modified NORO medium containing 9.9 mM KNO3 without additional nitrate feeding.

Notes: Abstract Pollutant degradation in biotrickling filters for waste air treatment is generally thought to occur only in the biofilm. In two experiments with toluene degrading biotrickling filters, we show that suspended microorganisms in the recycle liquid may substantially contribute to the overall pollutant removal. Two days after reactor start up, the overall toluene elimination capacity reached a maximum of 125 g m−3 h−1, which was twice that found during prolonged operation. High biodegradation activity in the recycle liquid fully accounted for this short-term peak of pollutant elimination. During steady-state operation, the toluene degradation in the recycle liquid was 21% of the overall elimination capacity, although the amount of suspended biomass was only 1% of the amount of immobilized biomass. The results suggest that biotrickling filter performance may be improved by selecting operating conditions allowing for the development of an actively growing suspended culture.

Notes: Abstract Several bacterial species can serve as biological ice nuclei. The best characterized of these is Pseudomonas syringae, a widely distributed bacterial epiphyte of plants. These biological ice nuclei find various applications in different fields, but an optimized production method was required in order to obtain the highly active cells which may be exploited as ice nucleators. The results presented here show that P. syringae cells reduce supercooling of liquid or solid media and enhance ice crystal formation at sub-zero temperatures, thus leading to a remarkable control of the crystallization phenomenon and a potential for energy savings. Our discussion focuses on recent and future applications of these ice nucleators in freezing operations, spray-ice technology and biotechnological processes.

Notes: Abstract The aim of the study was to investigate whether toxic fine chemical production can be improved using the solvent-tolerant Pseudomonas putida S12 in a two-liquid-phase system consisting of aqueous media and a water-immiscible octanol phase with production of 3-methylcatechol from toluene as the model conversion. For this purpose the genes involved in this conversion, todC1C2BAD from P. putida F1, were introduced into P. putida S12 with high stable expression. Production of 3-methylcatechol was monitored in batch incubations with different media using a single medium and a two-liquid medium–octanol system. The maximum concentration of 3-methylcatechol increased two-fold using the two-liquid medium–octanol system, irrespective of the selected medium.

Notes: Abstract A mixed microbial culture was immobilized by entrapment into silica gel (SG) and entrapment/ adsorption on polyurethane foam (PU) and ceramic foam. The phenol degradation performance of the SG biocatalyst was studied in a packed-bed reactor (PBR), packed-bed reactor with ceramic foam (PBRC) and fluidized-bed reactor (FBR). In continuous experiments the maximum degradation rate of phenol (q s max) decreased in the order: PBRC (598 mg l−1 h−1) 〉 PBR (PU, 471 mg l−1 h−1) 〉 PBR (SG, 394 mg l−1 h−1) 〉 FBR (PU, 161 mg l−1 h−1) 〉 FBR (SG, 91 mg l−1 h−1). The long-term use of the SG biocatalyst in continuous phenol degradation resulted in the formation of a 100–200 μm thick layer with a high cell density on the surface of the gel particles. The abrasion of the surface layer in the FBR contributed to the poor degradation performance of this reactor configuration. Coating the ceramic foam with a layer of cells immobilized in colloidal SiO2 enhanced the phenol degradation efficiency during the first 3 days of the PBRC operation, in comparison with untreated ceramic packing.

Notes: Abstract The xynB gene encoding the Bacillus pumilusβ-xylosidase was expressed separately and jointly with the Trichoderma reeseiβ-xylanase (xyn2) gene in the yeast Saccharomyces cerevisiae. Both genes were placed under the transcriptional control of the glucose-derepressible alcohol dehydrogenase 2 promoter (ADH2 P ) and terminator (ADH2 T ) sequences. The xynB gene was fused in frame to the yeast mating factor α1 secretion sequence (MFα1 S ) to effect secretion in S. cerevisiae. The fusion protein was designated Xlo1. Xlo1 produced in S. cerevisiae exhibited low affinity for xylobiose, but eventually hydrolyzed xylobiose and xylotriose to the monomeric constituent, d-xylose. Coproduction of Xyn2 and Xlo1 by S. cerevisiae led to a 25% increase in the amount of reducing sugars released from birchwood xylan compared to S. cerevisiae producing only the Xyn2 β-xylanase. However, no d-xylose was produced from birchwood xylan, presumably due to very low Xlo1 β-xylosidase activity and its low affinity for xylobiose.

Notes: Abstract In Penicillium chrysogenum, key enzymes involved in the production of penicillin reside in peroxisomes. As a first step to understand the role of these organelles in penicillin biosynthesis, we set out to isolate the genes involved in peroxisome biogenesis. Here we report the cloning and characterization of P. chrysogenum PEX1 and PEX6, which encode proteins of the AAA family of ATPases. The second AAA module, which is essential for the function of Pex1p and Pex6p in peroxisome biogenesis, is highly conserved in both PcPex1p and PcPex6p. PcPEX1 and PcPEX6 contain three and two introns, respectively.

Notes: Abstract A synthetic fluorinated humic acid (FHA) was prepared by the spontaneous oxidative polymerization of 3-fluorocatechol. The 13C-solid-state NMR spectrum showed signals in the region for aromatic carbons with different substituents (aryl-H, aryl-C, aryl-O carbons) and for carboxyl-carbon. The latter indicated the formation of carboxylic groups, probably caused by ring cleavages during the polymerization process. An indication of the formation of carboxylic groups was also found in the infrared spectrum (band at 1715 cm−1). The dissolved FHA was degraded with active mycelium of the agaric white-rot fungus Nematoloma frowardii as well as with its isolated manganese peroxidase. In both cases, decolorization of the brownish FHA solution and partial defluorination (45–60%) took place. Degradation proceeded via formation of lower-molecular-mass fulvic acid-like substances. The results demonstrate that halogenated humic substances, e.g., resulting from the humification of xenobiotic compounds (bound residues), can in principle be eliminated by ligninolytic fungi (e.g., soil colonizing litter decomposers) and their manganese peroxidase system.

Notes: Abstract A 3.0-kb genomic fragment has been isolated from Rhodospirillum rubrum (ATCC 25903) that contains an open reading frame (ORF) with strong homology to other known polyhydroxyalkanoate (PHA) synthase genes. This ORF has lower homology to the R. rubrum strain Ha PHA synthase than would be expected within the same species. We have conducted a series of heterologous expression studies evaluating the in vivo substrate specificity of PHA synthase genes from Rhodobacter sphaeroides, Ralstonia eutropha (formerly Alcaligenes eutrophus), Thiocystis violacea, and Nocardia corrallina, within the PHA-synthase-negative hosts, Ralstonia eutropha DSM541 and Pseudomonas putida GpP104. The N. corrallina PHA synthase incorporated the highest percentage of C5 monomers in the polymer when fermented in medium supplemented with 0.1% heptanoate as the sole carbon source. When the T. violacea and R. sphaeroides were expressed in the PHA-negative host DSM541, a greater percentage of C5 monomer was observed in the polymer as compared to the expression of the PHA synthase of R. eutropha, when the transconjugants were fermented in medium supplemented with 0.4% propionate. Evaluation for preference of medium-chain-length monomers demonstrated the flexibility of the N. corrallina, T. violacea, and R. eutropha synthase genes to polymerize a copolyester composed of short- and medium-chain-length monomers when the respective transconjugants were fermented in medium supplemented with 0.5% octanoate. These studies demonstrate that the PHA synthase from N. corrallina, T. violacea, and R. eutropha are able to polymerize a copolyester composed of short- and medium-chain-length monomers, while the PHA synthase from R. sphaeroides lacks this ability and only produces a short-chain-length polymer. These observations suggest that the composition of the PHA from the PHA-producing organisms does not necessarily reflect the inherent specificity of the PHA synthase.

Notes: Abstract A competitive immunosensor using a monoclonal antibody has been developed for the enumeration of Nitrobacter in activated sludge and other environmental samples. Its cross-reactivity was tested against a number of bacterial strains and isolates. All strains of the nitrite-oxidising genera Nitrobacter and Nitrococcus reacted strongly with the monoclonal antibody. The nitrite-oxidising Nitrospira moscoviensis, as well as the ammonia oxidising bacteria and the heterotrophic bacteria tested, did not show any affinity towards the antibody in the immunosensor. The numbers of Nitrobacter were analysed in sludge samples from several wastewater treatment plants in Sweden. Detectable amounts were found in all samples. This study shows the adequacy of using this immunosensor for the enumeration of Nitrobacter in natural environments.

Notes: Abstract Highly oil-absorbent polyurethane foam (PUF) materials were obtained by polymerizing polyether polyol mixture and carbodiimide-modified d-methyl diisocyanate in a weight ratio of 10:2. The foam materials were prepared to contain inorganic nutrients (slow-release fertilizer; SRF) and oil-degrading yeast cells, Yarrowia lipolytica 180, to be applied for removal of oil films on surface waters through absorption and biodegradation after oil spills. PUFs absorbed 7–9 times their own weight of Arabian light crude oil and the oil absorbency appeared to improve as the ratio of surface area to foam weight increased. PUFs showed excellent floatability which was maintained for more than 6 months in sea water, and less than 5% of the absorbed oil was released when the foams were left on water for more than 10 days. For immobilization of yeast cells into PUFs, various immobilization techniques were tested to compare their oil degrading ability and the maintenance thereof. All immobilized cells showed oil degrading abilities as good as those of free cells immediately after the preparation of PUFs, however, the activity of chitin-immobilized cells remained at a high level for the longest period of preservation. The high efficiency of oil absorption and oil degradation by PUF-immobilized yeast cells suggested that PUF-immobilized cells have a high potential as a bioremediation technique for the treatment of oil films on surface waters.

Notes: Abstract Acetobacter diazotrophicus is a diazotrophic bacterium that colonizes sugarcane tissues. Glucose is oxidized to gluconate in the periplasm prior to uptake and metabolism. A membrane-bound glucose dehydrogenase quinoenzyme [which contains pyrroloquinoline quinone (PQQ) as the prosthetic group] is involved in that oxidation. Gluconate is oxidized further via the hexose monophosphate pathway and tricarboxylic acid cycle. A. diazotrophicus PAL3 was grown in a chemostat with atmospheric nitrogen as the sole N source provided that the dissolved oxygen was maintained at 1.0–2.0% air saturation. The biomass yields of A. diazotrophicus growing with glucose or gluconate with fixed N were very low compared with other heterotrophic bacteria. The biomass yields under N-fixing conditions were more than 30% less than with ammonium as the N source using gluconate as the carbon source but, surprisingly, were only about 14% less with glucose. The following scheme for the metabolism of A. diazotrophicus through the different pathways emerged: (1) the respiratory chain of this organism had a different efficiency of ATP production in the respiratory chain (P:O ratio) under different culture conditions; and (2) N fixation was one (but not the sole) condition under which a higher P:O ratio was observed. The other condition appears to be the expression of an active PQQ-linked glucose dehydrogenase.

Notes: Abstract Fibrobacter succinogenes S85 grew rapidly on cellobiose (0.31 h−1) and the absolute rate of increase in fermentation acids was 0.68 h−1. Cultures that were provided with ball-milled cellulose initially produced fermentation acids and microbial protein as fast as those provided with cellobiose, but the absolute cellulose digestion rate eventually declined. If the inoculum size was increased, the kinetics decayed from first to zero order (with respect to cells) even sooner, but in each case the absolute rate declined after only 20 to 30% of the cellulose had been fermented. Congo red binding indicated that the cellulose surface area of individual cellulose particles was not decreasing, and the transition of ball-milled cellulose digestion corresponded with the appearance of unbound cells in the culture supernatant. When bound cells from partially digested cellulose were removed and the cellulose was re-incubated with a fresh inoculum, the initial absolute fermentation rate was as high as the one observed for undigested cellulose and cellobiose. Based on these results, cellulose digestion by F. succinogenes S85 appears to be constrained by cellulose surface area rather than cellulase activity per se.

Notes: Abstract A zinc-resistant bacterium, Brevibacterium sp. strain HZM-1 which shows a high Zn2+-adsorbing capacity, was isolated from the soil of an abandoned zinc mine. Kinetic analyses showed that Zn2+ binding to HZM-1 cells follows Langmuir isotherm kinetics with a maximum metal capacity of 0.64 mmol/g dry cells and an apparent metal dissociation constant of 0.34 mM. The observed metal-binding capacity was one of the highest values among those reported for known microbial Zn2+ biosorbents. The cells could also adsorb heavy metal ions such as Cu2+. HZM-1 cells could remove relatively low levels of the Zn2+ ion (0.1 mM), even in the presence of large excess amounts (total concentration, 10 mM) of alkali and alkali earth metal ions. Bound Zn2+ ions could be efficiently desorbed by treating the cells with 10 mM HCl or 10 mM EDTA, and the Zn2+-adsorbing capacity of the cells was fully restored by treatment of the desorbed cells with 0.1 M NaOH. Thus, HZM-1 cells can serve as an excellent biosorbent for removal of Zn2+ from natural environments. The cells could grow in the presence of significant concentrations of ZnCl2 (at least up to 15 mM) and thus is potentially applicable to in situ bioremediation of Zn2+-contaminated aqueous systems.

Notes: Abstract Potentiometric biosensors for the determination of organophosphorus (OP) insecticides were developed by applying either immobilized whole cells or cytoplasmic membrane fractions of wild-type Flavobacterium sp. on the surface of a glass pH electrode. The ability of Flavobacterium sp. to degrade OP compounds as sole carbon source was demonstrated for parathion with a degradation rate of almost 100% after 30 min and for chlorpyrifos of 33% after 48 h incubation. The products of hydrolysis of these compounds, p-nitrophenol and 3,5,6-trichloro-2-pyridinol, were accumulated in the medium and not used as substrates for growth by Flavobacterium sp. In the course of hydrolysis, which is catalyzed by organophosphorus hydrolase, two protons are released for each substrate molecule hydrolyzed. This stoichiometry forms the electrochemical basis of the potentiometric biosensors. Direct determination without previous extraction of OP was carried out in a stirred measuring cell with a pH electrode as transducer. Poly(carbamoyl sulfonate) (PCS) prepolymer, a hydrogel with good adhesive properties, was used for immobilization of whole cells and membrane-associated organophosphorus hydrolase. The sensor with cytoplasmic membrane fractions was superior to the one with whole cells and showed a linear range for paraoxon from 0.01 to 0.47 mM and 3 weeks' working stability.

Notes: Abstract Various pseudomonads are capable of the synthesis of polyhydroxyalkanoate (PHA), composed of medium chain length (MCL) 3-hydroxy fatty acids (C6—C14), when grown on simple carbon sources such as, for example, gluconate or acetate. In Pseudomonas putida, the fatty acid de novo synthesis and PHA synthesis are linked by the transacylase PhaG. Southern hybridization experiments with digoxigenin-labeled phaG Pp from P. putida and genomic DNA from various pseudomonads indicate that phaG homologues are present in various other pseudomonads. Although P. oleovorans does not accumulate PHAMCL from non-related carbon sources, its genomic DNA reveals a strong hybridization signal. We employed PCR to amplify this phaG homologue. The respective PCR product comprising the coding region of phaG Po was cloned into pBBR1MCS-2, resulting in plasmid pBHR84. DNA sequencing revealed that putative PhaGPo from P. oleovorans exhibited about 95% amino acid sequence identity to PhaGPp from P. putida. Reverse transcriptase-PCR analysis demonstrated that phaG Po was not transcribed even under inducing conditions, i.e. in the presence of gluconate as carbon source, whereas induction of phaG Pp transcription was obtained in P. putida. When octanoate was used as sole carbon source, only low levels of phaG mRNA were detected in P. putida. Plasmid pBHR84 complemented the phaG-negative mutant PhaGN-21 from P. putida. Interestingly, reintroduction of phaG Po under lac promoter control into the natural host P. oleovorans established PHAMCL synthesis from non-related carbon sources in this bacterium. These data indicated that phaG Po in P. oleovorans is not functionally expressed and does not exert its original function.

Notes: Abstract A PCR-based method is described for the efficient construction of targeted gene disruptions and gene fusions in the cyanobacterium Synechocystis sp. PCC6803. In a simple two-step PCR approach, a gene conversion cassette was synthesized targeting the polyhydroxyalkanoic acid (PHA) synthase genes. Upon transformation, PHA production in Synechocystis under normal as well as high production culture conditions was undetectable. The application of this method to the genetic inactivation of the phaE-C Syn gene cluster demonstrates its potential for genetic engineering of cyanobacteria and the study of functional genomics in Synechocystis.

Notes: Abstract Chemical riboflavin production, successfully used for decades, is in the course of being replaced by microbial processes. These promise to save half the costs, reduce waste and energy requirements, and use renewable resources like sugar or plant oil. Three microorganisms are currently in use for industrial riboflavin production. The hemiascomycetes Ashbya gossypii, a filamentous fungus, and Candida famata, a yeast, are naturally occurring overproducers of this vitamin. To obtain riboflavin production with the Gram-positive bacterium Bacillus subtilis requires at least the deregulation of purine synthesis and a mutation in a flavokinase/FAD-synthetase. It is common to all three organisms that riboflavin production is recognizable by the yellow color of the colonies. This is an important tool for the screening of improved mutants. Antimetabolites like itaconate, which inhibits the isocitrate lyase in A. gossypii, tubercidin, which inhibits purine biosynthesis in C. famata, or roseoflavin, a structural analog of riboflavin used for B. subtilis, have been applied successfully for mutant selections. The production of riboflavin by the two fungi seems to be limited by precursor supply, as was concluded from feeding and gene-overexpression experiments. Although flux studies in B. subtilis revealed an increase both in maintenance metabolism and in the oxidative part of the pentose phosphate pathway, the major limitation there seems to be the riboflavin pathway. Multiple copies of the rib genes and promoter replacements are necessary to achieve competitive productivity.

Notes: Abstract The effects of increased air pressure in a culture of the thermophilic microorganism Thermus sp. RQ-1 were investigated. Cell growth dependence on oxygen supply was investigated in a fermenter at atmospheric pressure. Total oxygen depletion from the medium for low values of k La was observed during the exponential growth phase. It was possible with this strain to enhance the oxygen transfer rate by increasing the air pressure. Cell productivity was improved by pressurisation up to 0.56 MPa for batch cultivation; and an induction of the antioxidant enzymes, superoxide dismutase and catalase, was observed with the rise in pressure. Cell pre-cultivation under pressurised conditions conferred to the cells more resistance to an exposure to hydrogen peroxide and more sensitivity to paraquat (methyl viologen). The usefulness of bioreactor pressurisation on the cultivation of Thermus sp. RQ-1 was demonstrated for fed-batch operation, with the attainment of higher cell densities. A two-fold increase in cell mass productivity was obtained by the use of hyperbaric air (0.5 MPa). With the pressurisation of the head-space in the reactor, it was also possible to eliminate the loss of liquid by evaporation, which amounted to more than 10% at 70 °C and atmospheric pressure.

Notes: Abstract Gene therapy is defined as the delivery of a functional gene for expression in somatic tissues with the intent to cure a disease. Thus, highly efficient gene transfer is essential for gene therapy. Receptor-mediated gene delivery can offer high efficiency in gene transfer, but several technical difficulties need to be solved. In this study, we first examined the DNA binding regions of the human DNA topoisomerase I (Topo I), using agarose gel mobility shift assay, in order to identify sites of noncovalent binding of human DNA Topo I to plasmid DNA. We identified four DNA binding regions in human DNA Topo I. They resided in aa 51–200, 271–375, 422–596, and 651–696 of the human DNA Topo I. We then used one of the four regions as a DNA binding protein fragment in the construction of a DNA delivery vehicle. Based on the known functional property of each Pseudomonas exotoxin A (PE) domain and human DNA Topo I, we fused the receptor binding and membrane translocation domains of PE with a highly positively charged DNA binding region of the N-terminal 198 amino acid residues of human DNA Topo I. The resulting recombinant protein was examined for DNA binding in vitro and transfer efficiency in cultured cells. The results show that this DNA delivery protein is a general DNA delivery vehicle without DNA sequence, topology, and cell-type specificity. The DNA delivery protein could be used to target genes of interest into cells for genetic and biochemical studies. Therefore, this technique can potentially be applied to cancer gene therapy.

Notes: Abstract  In order to direct the persistent expression of recombinant human serum albumin (HSA) from the GAL10 promoter in the yeast Saccharomyces cerevisiae, we carried out periodic feeding of galactose during shake-flask cultures. Unexpectedly, the recombinant protein secreted was observed to undergo rapid degradation, which was apparently accelerated by carbon-source feeding. The extracellular degradation of HSA occurred even in the strain deficient in the major vacuolar proteases PrA and PrB, and in the strain lacking the acidic protease Yap3p (involved in the generation of HSA-truncated fragments). Interestingly, the degradation correlated closely with the acidification of extracellular pH and thus was significantly overcome either by buffering the culture medium above pH 5.0 or by adding amino acid-rich supplements to the culture medium, which could prevent the acidification of medium pH during cultivation. Addition of arginine or ammonium salt also substantially minimized the degradation of HSA, even without buffering. The extracellular degradation activity was not detected in the cell-free culture supernatant but was found to be associated with intact cells. The results of the present study strongly suggest that the HSA secreted in S. cerevisiae is highly susceptible to the pH-dependent proteolysis mediated by cell-bound protease(s) whose activity and expression are greatly affected by the composition of the medium.

Notes: Abstract The identification of overlapping cosmids resulted in the discovery of the aflatoxin biosynthetic pathway gene cluster in Aspergillus flavus and A. parasiticus. This finding led to the cloning and characterization of one regulatory and 16 structural genes involved in aflatoxin biosynthesis, including the most recent report on the gene, ordA, which has been identified to be involved in the formation of four aflatoxins (B1, B2, G1 and G2). However, these genes do not account for all the identified chemical/biochemical steps in aflatoxin synthesis and efforts are underway to identify the genes controlling the other steps. We are also attempting to define the outer boundaries of the aflatoxin pathway gene cluster in the Aspergillus genome. For this goal, we extended sequencing in both directions from the existing (60 kb) aflatoxin pathway gene cluster, beyond the pksA gene at one end and the omtA gene at the other. Within the 25-kb genomic DNA sequence determined at the omtA end of the cluster, several new gene sequences were identified. The recently reported genes, vbs and ordA, were found within this 25-kb region. Two additional genes were also found in this region, a cytochrome P450 monooxygenase encoding gene, tentatively named cypX, and a monooxygenase encoding gene, tentatively named moxY, and these are also reported in this study. The sequence beyond these genes showed a 5-kb non-coding region of DNA followed by the presence of a cluster of genes probably involved in sugar metabolism. Northern blot analysis and reverse transcriptase-polymerase chain reaction (RT-PCR) studies demonstrated that the genes, cypX and moxY, are expressed concurrently with genes involved in aflatoxin biosynthesis. Therefore, the two putative aflatoxin pathway genes cypX and moxY followed by a 5-kb non-coding region of DNA define one end of the boundary of the aflatoxin pathway gene cluster in A. parasiticus.

Notes: Abstract Cell-free preparations of Tetrahymena thermophila catalyze the direct desaturation of cholesterol to Δ7-dehydrocholesterol (provitamin D3). The activity was isolated in the microsomal fraction from Tetrahymena homogenates. Δ7-Desaturase activity was stimulated fivefold by the addition of 6 mM ATP. Other cofactors assayed, including NAD, NADP, NADH or NADPH, had no significant effect. The activity was found in microsomes prepared from stationary-phase cultures of the ciliate, grown either with or without added cholesterol, thus indicating that it is constitutively expressed in T. thermophila cells.

Notes: Abstract Methyl ent-17-hydroxy-16β-kauran-19-oate was fed to a 2-day-old culture of the fungus Rhizopus stolonifer, fermenting at room temperature (25 °C) in an orbital shaker (2 l). After 11 days, both broth and mycelia were extracted with ethyl acetate. Two novel compounds were isolated from this experiment: methyl ent-9α,17-dihydroxy-16β-kauran-19-oate and methyl ent-7α,17-dihydroxy-16β-kauran-19-oate. Their structures were fully confirmed by spectroscopic methods.

Notes: Abstract The IAH1 gene of Saccharomyces cerevisiae encodes an esterase that preferentially acts on isoamyl acetate; however, the enzyme has not yet been completely purified from the yeast S. cerevisiae. We constructed the IAH1 gene expression system in Escherichia coli, and purified the IAH1 gene product (Iah1p). The amount of Iah1p produced by recombinant E. coli was more than 40% of total cellular proteins. The molecular size of Iah1p was 28 kDa by SDS-polyacrylamide gel electrophoresis. Judging from the molecular weight estimation by gel filtration of purified Iah1p, the enzyme was thought to be a homodimer. The K m values for isoamyl acetate and isobutyl acetate were 40.3 mM and 15.3 mM, respectively. The enzyme activity was inhibited by Hg2+, p-chloromercuribenzoate, and diisopropylfluorophosphate.

Notes: Abstract Until recently, only three species (Aspergillus flavus, A. parasiticus and A. nomius) have been widely recognized as producers of aflatoxin. In this study we examine aflatoxin production by two other species, A. tamarii and A. ochraceoroseus, the latter of which also produces sterigmatocystin. Toxin-producing strains of A. tamarii and A. ochraceoroseus were examined morphologically, and toxin production was assayed on different media at different pH levels using thin layer chromatography and a densitometer. Genomic DNA of these two species was probed with known aflatoxin and sterigmatocystin biosynthesis genes from A. flavus, A. parasiticus and A. nidulans. Under the high stringency conditions, A. tamarii DNA hybridized to all four of the A. flavus and A. parasiticus gene probes, indicating strong similarities in the biosynthetic pathway genes of these three species. The A. ochraceoroseus DNA hybridized weakly to the A. flavus and A. parasiticus verB gene probe, and to two of the three A. nidulans probes. These data indicate that, at the DNA level, the aflatoxin and sterigmatocystin biosynthetic pathway genes for A. ochraceoroseus are somewhat different from known pathway genes.

Notes: Abstract  The lactone 6-pentyl-α-pyrone has a characteristic coconut aroma and is produced by Trichoderma species. A study on the fermentative production of 6-pentyl-α-pyrone in both surface and submerged conditions by Trichoderma harzianum was carried out. Maximum concentrations of 455 mg/l and 167 mg/l after 96 h and 48 h of fermentation in surface and submerged conditions, respectively, were obtained without using any additional recovery operations. The resultant yields are higher than those previously reported in the literature, which may be attributable to strain characteristics in combination with the choice of fermentation conditions employed in the present study. Enough scope exists for further improvement in the yields by optimizing the cultural and nutritional parameters.

Notes: Abstract The biochemical oxygen demand (BOD) test (BOD5) is a crucial environmental index for monitoring organic pollutants in waste water but is limited by the 5-day requirement for completing the test. We have optimised a rapid microbial technique for measuring the BOD of a standard BOD5 substrate (150 mg glucose/l, 150 mg glutamic acid/l) by quantifying an equivalent biochemical mediator demand in the absence of oxygen. Elevated concentrations of Escherichia coli were incubated with an excess of redox mediator, potassium hexacyanoferrate(III), and a known substrate for 1 h at 37 °C without oxygen. The addition of substrate increased the respiratory activity of the microorganisms and the accumulation of reduced mediator; the mediator was subsequently re-oxidised at a working electrode generating a current quantifiable by a coulometric transducer. Catabolic conversion efficiencies exceeding 75% were observed for the oxidation of the standard substrate. The inclusion of a mediator allowed a higher co-substrate concentration compared to oxygen and substantially reduced the incubation time from 5 days to 1 h. The technique replicates the traditional BOD5 method, except that a mediator is substituted for oxygen, and we aim to apply the principle to measure the BOD of real waste streams in future work.

Notes: Abstract An old PAH/creosote contaminated soil (total ∼300 μg PAH/g soil) from a former gas work site in Stockholm, Sweden, has been treated at 20 °C with the addition of various nutrients and inoculated with bacteria (isolated from the soil) to enhance the degradation of selected hydrocarbons. Microcosm studies showed that the soil consisted of two contaminant fractions: one available, easily degraded fraction and a strongly sorbed, recalcitrant one. The bioavailable fraction, monitored by headspace solid phase microextraction, contained aromatics with up to three rings, and these were degraded within 20 days down to non-detectable levels (ng PAH/g soil) by both the indigenous bacteria and the externally inoculated samples. The nutrient additives were: a minimal medium (Bushnell-Haas), nitrate, nitrite, potting soil (Änglamark, Sweden), sterile water and aeration with Bushnell-Haas medium. After 30 days treatment most of the sorbed fractions were still present in the soil. Stirring or mechanical mixing of the soil slurries had the greatest effect on degradation, indicating that the substances were too strongly sorbed for the microorganisms. When stirring the choice of nutrient seemed less important. For the non-stirred samples the addition of nitrate with the bacterial inoculum showed the best degradation, compared to the other non-stirred samples. At the end of the experiments, accumulations of metabolites/degradation products, such as 9H-fluorenone, 4-hydroxy-9H-fluorenone, 9,10-phenanthrenedione and 4H-cyclopenta[def]phenanthrenone were detected. The metabolite 4-hydroxy-9H-fluorenone increased by several orders of magnitude during the biological treatments. Microbial activity in the soil was measured by oxygen consumption and carbon dioxide production.

Notes: Abstract Escherichia coli TG1 transformed with a temperature-regulated interferon-α expression vector was grown to high cell density in defined medium containing glucose as the sole carbon and energy source, utilizing a simple fed-batch process. Feeding was carried out to achieve an exponential increase in biomass at growth rates which minimized acetate production. Thermal induction of such high cell density cultures resulted in the production of ∼4 g interferon-α/l culture broth. Interferon-α was produced exclusively in the form of insoluble inclusion bodies and was solubilized under denaturing conditions, refolded in the presence of arginine and purified to near homogeneity, utilizing single-step ion-exchange chromatography on Q-Sepharose. The yield of purified interferon-α was ∼300 mg/l with respect to the original high cell density culture broth (overall yield of ∼7.5% active interferon-α). The purified recombinant interferon-α was found by different criteria to be predominantly monomeric and possessed a specific bioactivity of ∼2.5 × 108 IU/mg based on viral cytopathic assay.

Notes: Abstract Bacteriorhodopsin (BR) is the key protein for the halobacterial photosynthetic capabilities and is one of the very rare molecules which occur in crystalline form in nature. Since its discovery, which was reported in 1971, many efforts have been made to exploit the obvious technical potential of this molecule. Successful application of gene technology methods for the modification of the physical function of a biomolecule was first demonstrated with BR. This approach points the way to a new class of materials derived from evolutionary optimized biomaterials by genetic re-engineering. Mutated BRs proved to have significant advantages over the wild type in optical applications. The current status of potential technical applications of BR is reviewed. BR is employed as a photoelectric, photochromic or energy-converting element. First systems now exist which demonstrate the successful integration of this new material into existing technologies. Analyzing the patents filed, which claim the processing or application of BR, gives an indication to areas where further technical uses are to be expected in the near future.

Notes: Abstract The process for the production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB/V)] by bacterial fermentation and its recovery was analysed. The effects of various factors such as P(3HB/V) content, P(3HB/V) productivity, P(3HB/V) yield and 3-hydroxyvalerate (3HV) fraction in P(3HB/V) on the production cost of P(3HB/V) were examined. The increase in the 3HV yield on a carbon source did not significantly decrease the production cost when the 3HV fraction was 10 mol%, because the cost of the carbon substrate for 3HV was relatively small in terms of the total cost. However, at a 3HV fraction of 30 mol%, the 3HV yield on a carbon source had a significant effect on the total P(3HB/V) production cost. The production cost of P(3HB/V) increased linearly with the increase in the 3HV fraction in P(3HB/V).

Notes: Abstract New secretion vectors containing the Bacillus sp. endoxylanase signal sequence were constructed for the secretory production of recombinant proteins in Escherichia coli. The E. coli alkaline phosphatase structural gene fused to the endoxylanase signal sequence was expressed from the trc promoter in various E. coli strains by induction with IPTG. Among those tested, E. coli HB101 showed the highest efficiency of secretion (up to 25.3% of total proteins). When cells were induced with 1 mM IPTG, most of the secreted alkaline phosphatase formed inclusion bodies in the periplasm. However, alkaline phosphatase could be produced as a soluble form without reduction of expression level by inducing with less (0.01 mM) IPTG, and greater than 90% of alkaline phosphatase could be recovered from the periplasm by the simple osmotic shock method. Fed-batch cultures were carried out to examine the possibility of secretory protein production at high cell density. Up to 5.2 g/l soluble alkaline phosphatase could be produced in the periplasm by the pH-stat fed-batch cultivation of E. coli HB101 harboring pTrcS1PhoA. These results demonstrate the possibility of efficient secretory production of recombinant proteins in E. coli by high cell density cultivation.

Notes: Abstract Aqueous two-phase systems demix slowly due to similar physical properties. This is one of the major drawbacks for their adaptation for industrial scale extraction of enzymes. In the present work, a method to accelerate the demixing rates of these systems, employing a traveling acoustic wave field is reported for the first time. Phase-demixing for three systems, viz. polyethylene glycol (PEG)/sodium sulfate, PEG/potassium phosphate and PEG/maltodextrin were studied. The acoustically assisted process decreased the demixing time significantly (about 2- to 3-fold in PEG/salt systems and about 2-fold in the PEG/maltodextrin system), compared to that in gravity alone. Ultrasonication apparently enhanced the coalescence of the dispersed phase droplets due to the mild circulation currents it caused in the dispersion. This in turn enhanced the rate of demixing due to the increased migration velocity of the larger droplets.

Notes: Abstract The established Escherichia coli expression vectors ptrc99a, pKK223-3, pPLλ, pAsk75, pRA95, and pRA96, which differ in copy number, mode of induction, selection marker, and use of par sequences for stabilization, were investigated for the stable expression of recombinant L-leucine dehydrogenase from Bacillus cereus with a view to large-scale production. Best results were achieved with pIET98, a runaway-replication system derived from pRA96. Expression of L-leucine dehydrogenase was controlled by its constitutive B. cereus promoter and depended on host strain, cultivation temperature, induction time, and media composition. After cell cultivation at 30 °C and shifting to 41 °C to induce plasmid replication, E. coli BL21[pIET98] yielded 200 U LeuDH/mg protein, which corresponds to 〉50% of the soluble cell protein. Continuous cultivation in a semisynthetic high-cell-density medium verified structural and segregational stability over 100 generations in the absence of a selection pressure.

Notes: Abstract Enzymatic pretreatment of softwood kraft pulp was investigated using xylanase A (XylA) from Neocallimastix patriciarum in combination with mannanase and α-galactosidase. Mannanase A (ManA) from Pseudomonas fluorescens subsp. cellulosa and ManA from Clostridium thermocellum, both family 26 glycosyl hydrolases, are structurally diverse and exhibit different pH and temperature optima. Although neither mannanase was effective in pretreating softwood pulp alone, both enzymes were able to enhance the production of reducing sugar and the reduction of single-stage bleached κ number when used with the xylanase. Sequential incubations with XylA and P. fluorescens ManA produced the largest final κ number reduction in comparison to control pretreated pulp. The release of galactose from softwood pulp by α-galactosidase A (AgaA) from P. fluorescens was enhanced by the presence of ManA from the same microorganism, and a single pretreatment with these enzymes, in combination with XylA, gave the most effective κ number reduction using a single incubation. Results indicated that mixtures of hemicellulase activities can be chosen to enhance pulp bleachability.

Notes: Abstract Improved strains for the production of riboflavin (vitamin B2) were constructed through metabolic engineering using recombinant DNA techniques in Corynebacterium ammoniagenes. A C. ammoniagenes strain harboring a plasmid containing its riboflavin biosynthetic genes accumulated 17-fold as much riboflavin as the host strain. In order to increase the expression of the biosynthetic genes, we isolated DNA fragments that had promoter activities in C. ammoniagenes. When the DNA fragment (P54-6) showing the strongest promoter activity in minimum medium was introduced into the upstream region of the riboflavin biosynthetic genes, the accumulation of riboflavin was 3-fold elevated. In that strain, the activity of guanosine 5′-triphosphate (GTP) cyclohydrolase II, the first enzyme in riboflavin biosynthesis, was 2.4-fold elevated whereas that of riboflavin synthase, the last enzyme in the biosynthesis, was 44.1-fold elevated. Changing the sequence containing the putative ribosome-binding sequence of 3,4-dihydroxy-2-butanone 4-phosphate synthase/GTP cyclohydrolase II gene led to higher GTP cyclohydrolase II activity and strong enhancement of riboflavin production. Throughout the strain improvement, the activity of GTP cyclohydrolase II correlated with the productivity of riboflavin. In the highest producer strain, riboflavin was produced at the level of 15.3 g l−1 for 72 h in a 5-l jar fermentor without any end product inhibition.

Notes: Abstract The aflR gene of Aspergillus parasiticus and A. flavus encodes a binuclear zinc-finger, DNA-binding protein, AflR, responsible for activating the transcription of all known aflatoxin biosynthetic genes including itself. Studies to determine how environmental and nutritional factors affect aflR expression and hence aflatoxin production in A. parasiticus have been difficult to perform due to the lack of aflR“knockout” mutants. Transformation of an O-methylsterigmatocystin (OMST)-accumulating strain of A. parasiticus with an aflR-niaD gene disruption vector resulted in clones harboring a recombinationally inactivated aflR gene which no longer produced OMST or aflR transcript. By transformation of this aflR disruptant strain with constructs containing mutated versions of the aflR promoter, we identified three cis-acting sites that were necessary for aflR function: an AflR-binding site, a PacC-binding site, and a G + A-rich site near the transcription start site of aflR.

Notes: Abstract A polymerase chain reaction (PCR) protocol was developed for the specific detection of genes coding for type II polyhydroxyalkanoate (PHA) synthases. The primer-pair, I-179L and I-179R, was based on the highly conserved sequences found in the coding regions of Pseudomonas phaC1 and phaC2 genes. Purified genomic DNA or lysate of colony suspension can serve equally well as the target sample for the PCR, thus affording a simple and rapid screening of phaC1/C2-containing microorganisms. Positive samples yield a specific 540-bp PCR product representing partial coding sequences of the phaC1/C2 genes. Using the PCR method, P. corrugata 388 was identified for the first time as a medium-chain-length (mcl)-PHA producer. Electron microscopic study and PHA isolation confirmed the production of mcl-PHA in P. corrugata 388. The mcl-PHA of this organism has a higher molecular weight than that of similar polymers produced by other pseudomonads.

Notes: Abstract Gene encoding stress response proteins are induced by a variety of environmental stimuli including the presence of heavy metals. To address the utility of this response for pollutant detection, one cadmium- induced gene in Enterococcus faecalis was isolated, sequenced and studied at the transcriptional level. csrA contains an open reading frame encoding a protein of 168 amino acids with homology to the enzyme peptide methionine sulfoxide reductase. The csrA mRNA was barely present in unstressed E. faecalis cells grown in M17-glucose medium, but accumulated at higher levels in cadmium-treated cells. Mercury also had an effect on csrA expression, whereas lead, copper and manganese induced csrA expression only at the highest doses tested. Our results suggest that biosensors based on E. faecalis may have potential applications for environmental monitoring and should be constructed.

Notes: Abstract Biotransformation of 1-benzoylindole (BI) by the strains Aspergillus flavus VKM F-1024 and Aspergillus oryzae VKM F-44 was studied. The major metabolites isolated were identified as 4-hydroxyindole (4-HI), 5-hydroxyindole (5-HI), 4-hydroxy-1-benzoylindole, 4-hydroxy-1-(4′-hydroxy)-benzoylindole and indole. The structure of the metabolites was determined by mass spectrometry and proton nuclear magnetic resonance spectroscopy. The pathways of BI metabolism via initial monohydroxylation at C-4 and C-5 followed by cleavage of the benzoyl substituent to yield 4-HI and 5-HI were proposed. Indole was formed as a by-product, and its role as a potent inhibitor of BI hydroxylation at C-4 and C-5 is discussed.

Notes: Abstract  The physiological effects of 5-hydroxymethylfurfural (HMF) on Saccharomyces cerevisiae CBS 8066 in the presence and absence of furfural were studied. Experiments were carried out by pulse addition of HMF (2–4 g/l) as well as HMF (2 g/l) together with furfural (2 g/l) to batch cultivations of S. cerevisiae. Synthetic medium with glucose (50 g/l) as carbon and energy source was used. Addition of 4 g/l of HMF caused a decrease (approx. 32%) in the carbon dioxide evolution rate. Furthermore, the HMF was found to be taken up and converted by the yeast with a specific uptake rate of 0.14 (±0.03) g/g · h during both aerobic and anaerobic conditions, and the main conversion product was found to be 5-hydroxymethylfurfuryl alcohol. A previously unreported compound was found and characterized by mass spectrometry. It is suggested that the compound is formed from pyruvate and HMF in a reaction possibly catalysed by pyruvate decarboxylase. When HMF was added together with furfural, very little conversion of HMF took place until all of the furfural had been converted. Furthermore, the conversion rates of both furfural and HMF were lower than when added separately and growth was completely inhibited as long as both furfural and HMF were present in the medium.

Notes: Abstract A variation on Ramsay's method for microbial protein determination has been developed in order to quantify Thiobacillus ferrooxidans attached to ferric precipitates or in aqueous suspensions containing such precipitates. Some modifications have been introduced to provide a method that is more sensitive, simple and rapid. A linear standard curve is presented to permit a direct correlation between the protein concentration (mg/l) and the cell concentration (106 cells/ml). An application of this method has been demonstrated in the quantification of biomass immobilized on the surface of polyurethane foam particles in a packed bed reactor, several experiments having been conducted to establish the best conditions for the quantification studies.

Notes: Abstract Rhodothermus marinus ATCC 43812, a thermophilic bacterium isolated from marine hot springs, possesses hydrolytic activities for depolymerising substrates such as carob-galactomannan. Screening of expression libraries identified mannanase-positive clones. Subsequently, the corresponding DNA sequences were determined, eventually identifying a coding sequence specifying a 997 amino acid residue protein of 113 kDa. Analyses revealed an N-terminal domain of unknown function and a C-terminal mannanase domain of 550 amino acid residues with homology to known mannanases of glycosidase family 26. Action pattern analysis categorised the R. marinus mannanase as an endo-acting enzyme with a requirement for at least five sugar moieties for effective catalytic activity. When expressed in Escherichia coli, purified gene product with catalytic activity was mainly found as two protein fragments of 45 kDa and 50 kDa. The full-length protein of 113 kDa was only detected in crude extracts of R. marinus, while truncated protein-containing fractions of the original source resulted in a major active protein of 60 kDa. Biochemical analysis of the mannanase revealed a temperature and pH optimum of 85 °C and pH 5.4, respectively. Purified, E. coli-produced protein fragments showed high heat stability, retaining more than 70% and 25% of the initial activity after 1 h incubation at 70 °C and 90 °C, respectively. In contrast, R. marinus-derived protein retained 87% activity after 1 h at 90 °C. The enzyme hydrolysed carob-galactomannan (locust bean gum) effectively and to a smaller extent guar gum, but not yeast mannan.

Notes: Abstract Batch and continuous cultivation of Anaerobiospirillum succiniciproducens were systematically studied for the production of succinic acid from whey. Addition of 2.5 g l−1 yeast extract and 2.5 g l−1 polypeptone per 10 g l−1 whey was most effective for succinic acid production from both treated and nontreated whey. When 20 g l−1 nontreated whey and 7 g l−1 glucose were used as cosubstrates, the yield and productivity of succinic acid reached at the end of fermentation were 95% and 0.46 g (l h)−1, respectively. These values were higher than those obtained using nontreated whey alone [93% and 0.24 g (l h)−1 for 20 g l−1 whey]. Continuous fermentation of A. succiniciproducens at an optimal dilution rate resulted in the production of succinic acid with high productivity [1.35 g (l h)−1], high conversion yield (93%), and higher ratio of succinic acid to acetic acid (5.1:1) from nontreated whey.

Notes: Abstract The dtaAX gene encoding a pyridoxal 5′-phosphate (pyridoxal-P)-dependent low-specificity d-threonine aldolase was cloned from the chromosomal DNA of Alcaligenes xylosoxidans IFO 12669. It contains an open reading frame consisting of 1,134 nucleotides corresponding to 377 amino acid residues. The predicted amino acid sequence displayed 54% identity with that of d-threonine aldolase from gram-positive bacteria Arthrobacter sp. DK-38, but showed no significant similarity with those of other known pyridoxal-P enzymes. This gram-negative bacterial enzyme was highly overproduced in recombinant Escherichia coli cells, and the specific activity of the enzyme in the cell extract was as high as 18 U/mg (purified enzyme 38.6 U/mg), which was 6,000 times higher than that from the wild-type Alcaligenes cell extract. The recombinant enzyme was thus feasibly purified to homogeneity by ammonium sulfate fractionation and DEAE-Toyopearl chromatography steps. The recombinant low-specificity d-threonine aldolase was shown to be an efficient biocatalyst for resolution of l-β-3,4-methylenedioxyphenylserine, an intermediate for production of a therapeutic drug for Parkinson's disease.

Notes: Abstract The operon encoding aspartokinase and aspartate semialdehyde dehydrogenase was cloned and sequenced from rifamycin-SV-producing Amycolatopsis mediterranei U32 previously. In the present work, these two genes were introduced into the auxotrophic Escherichia coli strain CGSC5074 (ask −) and E. coli X6118 (asd −), respectively. The A. mediterranei U32 aspartokinase and aspartate semialdehyde dehydrogenase genes can be functionally expressed in E. coli and the gene products are able to substitute for the E. coli enzymes. Histidine-tagged aspartokinase and aspartate semialdehyde dehydrogenase were partially purified from E. coli cellular extracts and their kinetic characteristics were studied. Both aspartokinase and aspartate semialdehyde dehydrogenase showed typical Michaelis-Menten type substrate saturation patterns. Aspartokinase has K m values of 3.4 mM for aspartate and 2.3 mM for ATP, while aspartate semialdehyde dehydrogenase has K m values of 1.25 mM for dl-aspartate semialdehyde and 0.73 mM for NADP, respectively. Aspartokinase was inhibited by l-threonine, l-lysine, and l-methionine, but not by l-isoleucine and diaminopimelate. Aspartate semialdehyde dehydrogenase was not inhibited by any of the end-product amino acids at a concentration of less than 5 mM. Hill plot analysis suggested that aspartokinase was subject to allosteric control by l-threonine. Repression of both aspartokinase and aspartate semialdehyde dehydrogenase gene transcription in A. mediterranei U32 by l-lysine, l-methionine, l-threonine, and l-isoleucine were found. The network of regulation of aspartokinase and aspartate semialdehyde dehydrogenase in rifamycin SV-producing A. mediterranei U32 is presented.

Notes: Abstract  Genes for dimeric and tetrameric human metallothionein (hMT) were designed and successfully overexpressed in Escherichia coli to generate functional oligomeric hMTs. An hMT synthesized with prokaryotic codons, a linker encoding a gly-gly-gly tripeptide, and Met-deficient hMT-II was ligated to create a dimeric hMT, from which a tetrameric hMT was then constructed. The increased molecular size of the constructs resulted in improved stability and productivity in E. coli. The oligomeric proteins formed inclusion bodies which were dissolved with dithiothreitol, and the purified apo-metallothioneins were reconstituted with Cd or Zn ions in a reducing condition. The oligomeric hMT proteins incubated with Cd ions showed a typical Cd-thiolate absorbance peak at 245–255 nm. The dimeric and tetrameric hMT proteins exhibited both Cd and Zn binding activities that were respectively two and four times higher than those of the hMT-II monomer protein. These novel oligomeric hMTs may be useful in bioremediation for heavy metals.

Notes: Abstract An engineered yeast with emission of fluorescence from the cell surface was constructed. Cell surface engineering was applied to display a visible reporter molecule, green fluorescent protein (GFP). A glucose-inducible promoter GAPDH as a model promoter was selected to control the expression of the reporter gene in response to environmental changes. The GFP gene was fused with the gene encoding the C-terminal half of α-agglutinin of Saccharomyces cerevisiae having a glycosylphosphatidylinositol anchor attachment signal sequence. A secretion signal sequence of the fungal glucoamylase precursor protein was connected to the N-terminal of GFP. This designed gene was integrated into the TRP1 locus of the chromosome of S. cerevisiae with homologous recombination. Fluorescence microscopy demonstrated that the transformant cells emitted green fluorescence derived from functionally expressed GFP involved in the fusion molecule. The surface display of GFP was further verified by immunofluorescence labeling with a polyclonal antibody (raised in rabbits) against GFP as the first antibody and Rhodamine Red-X-conjugated goat anti-rabbit IgG as the second antibody which cannot penetrate into the cell membrane. The display of GFP on the cell surface was confirmed using a confocal laser scanning microscope and by measuring fluorescence in each cell fraction obtained after the subcellular fractionation. As GFP was proved to be displayed as an active form on the cell surface, selection of promoters will endow yeast cells with abilities to respond to changes in environmental conditions, including nutrient concentrations in the media, through the emission of fluorescence.

Notes: Abstract  In spite of the large-scale industrial use of the acetone-butanol fermentation process earlier this century (until 1983 in South Africa), very little has been published on the inoculum preparation techniques required for successful fermentation using these bacteria. In particular, heat-shocking has often been referred to as “useful” but no quantitative data are available. Data presented in this paper demonstrate and quantify the effect of heat-shocking on batch fermentation yields using one organism capable of this fermentation.

Notes: Abstract An n-alkane-assimilating strain of Candida tropicalis was selected in sandy soil inoculated with microorganisms from contaminated sites. Competition experiments with n-alkane utilizers from different strain collections confirmed that yeasts overgrow bacteria in sandy soil. Acidification of the soil is one of the colonization factors useful for the yeasts. It can be counteracted by addition of bentonite, a clay mineral with high ion exchange capacity, but not, however, by kaolin. Strains of different yeast species showed different levels of competitiveness. Strains of Arxula adeninivorans, Candida maltosa, and Yarrowia lipolytica overgrew strains of C. tropicalis, C. shehatae or Pichia stipitis. Two strains of C. maltosa and Y. lipolytica coexisted during several serial transfers under microcosm conditions.

Notes: Abstract The biodegradability under aerobic conditions of volatile hydrocarbons (4–6 carbons) contained in gasoline and consisting of n-alkanes, iso-alkanes, cycloalkanes and alkenes, was investigated. Activated sludge was used as the reference microflora. The biodegradation test involved the degradation of the volatile fraction of gasoline in closed flasks under optimal conditions. The kinetics of biodegradation was monitored by CO2 production. Final degradation was determined by gas chromatographic analysis of all measurable hydrocarbons (12 compounds) in the mixture after sampling the headspace of the flasks. The degradation of individual hydrocarbons was also studied with the same methodology. When incubated individually, all hydrocarbons used as carbon sources, except 2,2-dimethylbutane and 2,3-dimethylbutane, were completely consumed in 30 days or less with different velocities and initial lag periods. When incubated together as constituents of the light gasoline fraction, all hydrocarbons were metabolised, often with higher velocities than for individual compounds. Cometabolism was involved in the degradation of dimethyl isoalkanes.

Notes: Abstract The thermostable esterase from the moderate thermophile Bacillus circulans was purified to homogeneity using a four-step procedure. Esterase activity was associated with a protein of molecular mass 95 kDa, composed of three identical subunits of 30 kDa. The esterase activity was thermostable with a maximum activity at 55 °C using initial rate assay. The half-inactivation temperature was 71 °C after a 1-h treatment, which compared favorably to that of other enzymes. Activity at temperatures of 30–37 °C was high (about half of maximum), making this new enzyme very attractive for applications in this moderate temperature range. The esterase also showed high activity at a rather alkaline pH (higher than 10). The specificity pattern showed a marked specificity for mid-chain-length fatty acids (3–8 carbon atoms), which classified the enzyme as a carboxylesterase.

Notes: Abstract Mushroom cultivation presents an economically important biotechnological industry that has markedly expanded all over the world in the past few decades. Mushrooms serve as delicacies for human consumption and as nutriceuticals, as “food that also cures”. Mushrooms, the fruiting bodies of basidiomycetous fungi, contain substances of various kinds that are highly valued as medicines, flavourings and perfumes. Nevertheless, the biological potential of mushrooms is probably far from exploited. A major problem up to now is that only a few species can be induced to fruit in culture. Our current knowledge on the biological processes of fruiting body initiation and development is limited and arises mostly from studies of selected model organisms that are accessible to molecular genetics. A better understanding of the developmental processes underlying fruiting in these model organisms is expected to help mushroom cultivation of other basidiomycetes in the future.

Notes: Abstract Domestic organic waste (DOW) collected in The Netherlands was analysed and used as substrate for acetone, butanol and ethanol (ABE) production. Two different samples of DOW, referred to as fresh DOW and dried DOW, were treated by extrusion in order to expand the polymer fibres present and to obtain a homogeneous mixture. The extruded material was analysed with respect to solvent and hot water extractives, uronic acids, lignin, sugars and ash. The total sugar content in the polymeric fractions of the materials varied from 27.7% to 39.3% (w/w), in which glucose represented the 18.4 and 25.1% of the materials, for fresh and dried DOW, respectively. The extruded fresh DOW was used as substrate for the ABE fermentation by the solventogenic strain Clostridium acetobutylicum ATCC 824. This strain was grown on a suspension of 10% (w/v) DOW in demineralised water without further nutrient supplement. This strain produced 4 g ABE/100 g extruded DOW. When C. acetobutylicum ATCC 824 was grown on a suspension of 10% (w/v) DOW hydrolysed by a combination of commercial cellulases and β-glucosidases, the yield of solvents increased to 7.5 g ABE/100 g extruded DOW. The utilisation of sugar polymers in both hydrolysed and non-hydrolysed DOW was determined, showing that only a small proportion of the polymers had been consumed by the bacteria. These results indicate that growth and ABE production on DOW is mainly supported by soluble saccharides in the medium.

Notes: Abstract The PHA synthase structural gene of Thiocapsa pfennigii was identified and subcloned on a 2.8-kbp BamHI restriction fragment, which was cloned recently from a genomic 15.6-kbp EcoRI restriction fragment. Nucleotide sequence analysis of this fragment revealed three open reading frames (ORFs), representing coding regions. Two ORFs encoded for the PhaE (M r 40,950) and PhaC (M r 40,190) subunits of the PHA synthase from T. pfennigii and exhibited high homology with the corresponding proteins of the Chromatium vinosum (52.8% and 85.2% amino acid identity) and the Thiocystis violacea (52.5% and 82.4%) PHA synthases, respectively. This confirmed that the T. pfennigii PHA synthase was composed of two different subunits. Also, with respect to the molecular organization of phaE and phaC, this region of the T. pfennigii genome resembled very much the corresponding regions of C. vinosum and of Thiocystis violacea. A recombinant strain of Pseudomonas putida, which overexpressed phaE and phaC from T. pfennigii, was used to isolate the PHA synthase by a two-step procedure including chromatography on Procion Blue H-ERD and hydroxyapatite. The isolated PHA synthase consisted of two proteins exhibiting the molecular weights predicted for PhaE and PhaC. Hybrid PHA synthases composed of PhaE from T. pfennigii and PhaC from C. vinosum and vice versa were constructed and functionally expressed in a PHA-negative mutant of P. putida; and the resulting PHAs were analyzed.

Notes: Abstract The production of d-hydantoinase and carbamoylase from Agrobacterium radiobacter NRRL B11291 using T7 and trc promoters, respectively, was found to cause protein aggregates in Escherichia coli. We initiated a systematic study aimed at overproducting these two proteins in a soluble form. As a result, the protein aggregate from carbamoylase overproduction could be alleviated with the aid of GroEL/GroES. In contrast, the production of a high level of d-hydantoinase in an active form can be achieved at low temperature (25 °C) or by the coproduction of DnaJ/DnaK. Overall, with such approaches both recombinant proteins gain more than a four-fold increase in enzyme activity. In addition, by fusion with thioredoxin, d-hydantoinase activity can be increased 25% more than the unfused counterpart in the presence of DnaJ/DnaK. These results indicate the success of our approaches to overproducing d-hydantoinase and carbamoylase in a soluble form in E. coli.

Notes: Abstract A CH3OH-utilizing bacterium that has the ability to produce extracellular polysaccharide (EPS) was isolated from a soil sample, and was identified as the obligate methylotroph Methylobacillus sp. strain 12S on the basis of its 16S rDNA sequence and growth-substrate specificity. The EPS produced by strain 12S was purified and the sugar composition was analysed by GC-MS and HPLC to reveal that the EPS was a heteropolymer composed of glucosyl, galactosyl, and mannosyl residues in the molar ratio 3:1:1. In order to produce mono- and/or oligosaccharides by single-step fermentation from CH3OH, stain 12S was mutagenized by transposon 5. Among eleven EPS-deficient mutants, three strains were found to accumulate significant amounts of reducing sugars in the media. The amounts of the reducing sugars produced by the mutants (〉ca. 700 mg glucose equivalent/l) were 〉11–22 times higher than those produced by the wild-type strain (〈ca. 60 mg glucose equivalent/l). The GC-MS analysis showed that all the mutants accumulated glucose, erythrose, threose and a disaccharide-like compound in the media.

Notes: Abstract A chitosanase was purified from the culture fluid of the chitino- and chitosanolytic bacterium Burkholderia gladioli strain CHB101. The purified enzyme (chitosanase A) had a molecular mass of 28 kDa, and catalyzed the endo-type cleavage of chitosans having a low degree of acetylation (0–30%). The enzyme hydrolyzed glucosamine oligomers larger than a pentamer, but did not exhibit any activity toward N-acetyl-glucosamine oligomers and colloidal chitin. The gene coding for chitosanase A (csnA) was isolated and its nucleotide sequence determined. B. gladioli csnA has an ORF encoding a polypeptide of 355 amino acid residues. Analysis of the N-terminal amino acid sequence of the purified chitosanase A and comparison with that deduced from the csnA ORF suggests post-translational processing of a putative signal peptide and a possible substrate-binding domain. The deduced amino acid sequence corresponding to the mature protein showed 80% similarity to the sequences reported from Bacillus circulans strain MH-K1 and Bacillus ehimensis strain EAG1, which belong to family 46 glycosyl hydrolases.

Notes: Abstract A pH-auxostatic fed-batch process was developed for the secretory production of a fusion protein consisting of the pro-part of Staphylococcus hyicus lipase and two synthetic human calcitonin (hCT) precursor repeats under the control of a xylose-inducible promotor from Staphylococcus xylosus. Using glycerol as the energy source and pH-controlled addition of yeast extract resulted in the production of 2000 mg l−1 of the fusion protein (420 mg l−1 of the recombinant hCT precursor) within 14 h, reaching 45 g l−1 cell dry mass with Staphylococcus carnosus in a stirred-tank reactor. Product titer and space-time yield (30 mg calcitonin precursor l−1 h−1) were thus improved by a factor of 2, and 4.5, respectively, compared to Escherichia coli expression-secretion systems for the production of calcitonin precursors. Two hundred grams of the fusion protein was secreted by the recombinant S. carnosus on a 150-l scale (scale-up factor of 50) with a minimum use of technical-grade yeast extract (40 mg fusion protein g−1 yeast extract).

Notes: Abstract The characteristics of regulation of the gene encoding the third xylanase (Xyn III) of a filamentous fungus, Trichoderma reesei PC-3–7, were studied by Northern blot analysis. A partial DNA sequence (185 bp) of the xyn3 gene was obtained by PCR amplification of genomic DNA of T. reesei PC-3–7 and sequenced. This xyn3 gene fragment was used as a probe for Southern and Northern blot analysis. The expression of the xyn3 gene was regulated at the transcriptional level. The xyn3 mRNA was expressed in mycelia of T. reesei PC-3–7 induced by Avicel, l-sorbose and sophorose, but not by xylose, xylooligosaccharides and birchwood xylan. Furthermore, it was observed that xyn3 was synchronously expressed with egl1 but not with xyn1 and xyn2 by l-sorbose, indicating that the xyn3 gene may be coordinately expressed with cellulase genes. By Southern blot analysis, the xyn3 gene was confirmed to exist as a single copy in both strains of T. reesei PC-3–7 and QM9414. However, no xyn3 mRNA appeared in the mycelia induced by any kind of inducers in T. reesei QM9414 even when total RNA was used in large excess, suggesting that the xyn3 gene in T. reesei QM9414 is in the dormant state and cannot be expressed. Therefore, T. reesei PC-3–7 may be a very useful strain for elucidating the induction mechanism of xylanase biosynthesis by cellulosic and xylanosic substrates, and also the regulatory correlation between cellulase and xylanase induction.

Notes: Abstract Pseudomonas fluorescens strain 2-79 (NRRL B-15132) is a classic biological control agent known to produce phenazine-1-carboxylic acid (PCA) as its primary means of suppressing take-all disease of wheat. In addition to PCA, an unknown metabolite was discovered in a liquid culture used to produce the biocontrol agent. The objective of the current study was to isolate, identify, and evaluate the accumulation of this compound in production cultures. Upon centrifugal fractionation of a production culture, thin-layer chromatography (TLC) analyses of extracts of the cells and cell-free supernatant indicated the compound to be primarily in the supernatant. Purified compound was obtained by extraction of culture supernatant, followed by flash chromatography of the extract and preparative TLC. The 1H and 13C nuclear magnetic resonance and electron impact mass spectra indicated the compound to be 2-acetamidophenol (AAP). Measured by reversed-phase HPLC, the accumulations of AAP and PCA in cultures of strain 2-79 reached 0.05 g/l and 1 g/l, respectively. The accumulations of AAP and PCA in liquid cultures were linearly correlated (P 〈 0.001), as shown by studies of cultures stimulated to yield varying levels of PCA by controlling levels of oxygen transfer, pH, and growth medium composition. In this study, oxygen limitation, a defined amino-acid-free medium, and neutral pH stimulated maximal production of both AAP and PCA. Furthermore, a transposon mutant of 2-79 [2A40 2-79 (phz–)] unable to produce PCA did not accumulate AAP. These findings indicate that AAP and PCA are likely to share a common segment of biosynthetic pathway. This is the first report of AAP production by a strain of P. fluorescens. Possible routes of AAP production are discussed relative to current knowledge of the phenazine biosynthetic pathway of strain 2-79. The pertinence of AAP to the design of commercial seed inoculants of phenazine-producing bacteria for controlling wheat take-all is also considered.

Notes: Abstract A chitinase gene (chiA) from Pseudomonas sp. YHS-A2 was cloned into Escherichia coli using pUC19. The nucleotide sequence determination revealed a single open reading frame of chiA comprised of 1902 nucleotide base pairs and 633 deduced amino acids with a molecular weight of 67,452 Da. Amino acid sequence alignment showed that ChiA contains two putative chitin-binding domains and a single catalytic domain. Two proline-threonine repeat regions, which are linkers between catalytic and substrate-binding domains in some cellulases and xylanases, were also found. From E. coli, ChiA was purified 12.8-fold relative to the periplasmic fraction. The Michaelis constant and maximum initial velocity for p-nitrophenyl-N,N′-diacetylchitobiose were 1.06 mM and 44.4 μmol/h per mg protein, respectively. The purified ChiA binds not only to colloidal chitin but also to other substrates (avicel, chitosan, and xylan), but the binding affinity of avicel, chitosan, and xylan is around 10 times lower than that of colloidal chitin. The reaction of ChiA with colloidal chitin and chitooligosaccharides (trimer-hexamer) produced an end product of N,N′-diacetylchitobiose, indicating that ChiA is a chitobiosidase.

Notes: Discusses the particulation of organic barrier layers, based on laboratory-bench data, obtained from the exposure of painted panels in low, high or neutral pHelectrolytes. It also discusses their compatibility with the succeeding and preceding layers and the galvanic interactions at the layer substrate interfaces. Aspects like substrate effect, leaching of the micaceous iron powder, role of high temperature and hydrodynamic disturbances and distribution of ultrafine particulates have been highlighted using potential versus time plot, AAS data, and galvanic current measurements and XRD analysis. Exposure tests conducted under ambient conditions and under very strong hydrodynamic disturbances, revealed superior properties of the SiC particulated epoxy based barrier layers.

Notes: Four different approaches were taken to improve the water resistance of poly(vinyl acetate) (PVAc) emulsion adhesives. The improved wood adhesives were tested according to the ISO 9020 standard. Tensile storage modulus (E') and glass transition temperature of the polymer films were measured using dynamic mechanical thermal analysis to quantify the influence of different approaches on those variables. Gel fraction and swelling ratio of the polymer film were measured to evaluate internal crosslink density. The experimental results showed that blending melamine/urea/formaldehyde (MUF) resin with PVAc emulsions modified the water resistance considerably and the film had a high E' since an interpenetrating network-type structure was formed in the polymer. The advantages and limitations of each modification were assessed on the basis of comparison of the results.

Notes: In aqueous alkaline ink media aluminium pigments react with the evolution of hydrogen, whereas the more noble copper and brass pigments react by the absorption of oxygen, which can be measured gas-volumetrically. These different corrosion reactions can be inhibited with addition of certain binders for printing inks, such as styrene-maleic acid resins, maleic resins and to some extent styrene-acrylate resins. So, certain ink resins inhibit corrosion reactions of different noble metal pigments in a reducing hydrogen atmosphere (aluminium) as well as in an oxidizing oxygen atmosphere (copper and brass). The overall best resin is that with the lowest acid number. Atomic absorption spectroscopy measurements showed that a lower acid number pruduces a lower solubility of copper and zinc in the medium.

Notes: UV-radiation curing has become a well accepted technology which has found its main applications in the coating industry, the graphic arts and microelectronics. The liquid to solid phase change proceeds within a fraction of a second on intense illumination at ambient temperature. The kinetics of such ultrafast polymerization have been followed in situ by real-time infrared spectroscopy. This technique proved well suited to assess the performance of the various constituents of a UV-curable formulation (photoinitiator, monomer, functionalized oligomer) from measurements of the actual polymerization rate and of the final cure extent. The photopolymerization of both radical-type (acrylates) and cationic type (epoxides, vinyl ethers) monomers has been examined, as well as that of monomer blends. Interpenetrating polymer networks have been synthetized by photocrosslinking of a hybrid acrylate/epoxide system which generates a hard and scratch-resistant polymer material.

Notes: A series of painted steel panels ranging in colour from white to black have been assessed for heat build up under the Australian summer sun. The heat build up in these panels varied considerably. Two different laboratory techniques were investigated for prediction of exterior heat build up in painted substrate. Both techniques proved to have some potential, in particular the second technique involving reflectance measurements in the region of 2,400-2,500nm. The work has also shown that a fairly good correlation exists between CIE L value and exterior heat build up in painted substrates.

Notes: Silicone resin based protective coatings are generally used for high temperature applications. In this work, anti-corrosive and heat resistant properties of titanium dioxide, mica, zirconium oxide and quartz combination pigments with silicone resin as carrier vehicle in primer and top coat for mild steel surface have been evaluated. Promising results were obtained, showing that the ceramic pigments (zirconium oxide and quartz) impart heat-resistance protection for steel substrate up to 370°. Electro-chemical impedance spectroscopy, immersion studies and salt spray test results show good corrosion protection for the steel surface.

Notes: Studies the thermal degradation of lac resin by FT-IR spectroscopic techniques to determine functional group changes occurring in the degradative process. Compares FT-IR spectra of lac during different stages of thermal degradation; observes no indication of inter-esterification or dehydration from spectroscopic data, as proposed by earlier workers on the basis of wet chemical methods. Unequivocally concludes that inter-etherification (dioxolanation) and hydroperoxidation reactions are much more likely to occur during the thermal degradation process.

Notes: The alkyd resin of short oil length with low acid value was modified with novolac-based epoxy esters, prepared by using tobacco seed oil fatty acids. The prepared blends were cured using an aliphatic amine as curing agent. The films of cured resins were applied over various panels and their film characteristics were studied. It was found that the scratch hardness and corrosion resistance increased with the increase of epoxy esters in the blend. The chemical resistance was also studied and found to be better with increasing epoxy esters in the blends.

Notes: The synthetic reaction of rosin-modified phenolic resin used as a vehicle for offset inks was studied. The two-step synthetic process to feed resol by dropping was adopted to control the formation of methylene quinone, which was derived from the dehydration of hydroxymethyl phenol. The methylene quinone could react with rosin and vegetable oil to form dibenzopyran cyclic product by Diels-Alder reaction. The dibenzopyran cyclic product was favourable for raising the molecular weight and the mineral oil tolerance of the modified resin.

Notes: Four different organic systems, containing either vinyl acetate resins or epoxy resins were applied on steel pretreated specimens exposed to deionized and deaerated water taken from the installations of the Public Greek Electricity Company. Electrochemical Impedance Spectroscopy, potentiodynamic polarization measurements, dielectric measurements and visual observations after salt spray test were performed for monitoring the changes of the organic systems characteristics at predetermined exposure time in the deionized - deaerated water. All four coating systems found providing protection on steel surfaces. The classification of their performance depends mainly on the composition of the primer, as well as, on the intrinsic characteristics of the other layers. Thus the system consisting of epoxy primer with zinc dust, epoxy high build layer and a two component epoxy paint with iron oxide is the one exhibiting the highest protection efficiency.