ALBERT

Description: Microscopy, confocal Raman spectroscopy and powder X-ray diffraction (PXRD) were used for in situ investigations of the CO2-hydrocarbon exchange process in gas hydrates and its driving forces. The study comprises the exposure of simple structure I CH4 hydrate and mixed structure II CH4–C2H6 and CH4–C3H8 hydrates to gaseous CO2 as well as the reverse reaction, i.e., the conversion of CO2-rich structure I hydrate into structure II mixed hydrate. In the case of CH4–C3H8 hydrates, a conversion in the presence of gaseous CO2 from a supposedly more stable structure II hydrate to a less stable structure I CO2-rich hydrate was observed. PXRD data show that the reverse process requires longer initiation times, and structural changes seem to be less complete. Generally, the exchange process can be described as a decomposition and reformation process, in terms of a rearrangement of molecules, and is primarily induced by the chemical potential gradient between hydrate phase and the provided gas phase. The results show furthermore the dependency of the conversion rate on the surface area of the hydrate phase, the thermodynamic stability of the original and resulting hydrate phase, as well as the mobility of guest molecules and formation kinetics of the resulting hydrate phase.

Description: Numerical tools are essential for the prediction and evaluation of conventional hydrocarbon reservoir performance. Gas hydrates represent a vast natural resource with a significant energy potential. The numerical codes/tools describing processes involved during the dissociation (induced by several methods) for gas production from hydrates are powerful, but they need validation by comparison to empirical data to instill con fidence in their predictions. In this study, we successfully reproduce experimental data of hydrate dissociation using the TOUGH+HYDRATE (T+H) code. Methane(CH4)hydrate growth and dissociation in partially water- and gas-saturated Bentheim sandstone were spatially resolved using Magnetic Resonance Imaging (MRI), which allows the in situ monitoring of saturation and phase transitions. All the CH4 that had been initially converted to gas hydrate was recovered during depressurization. The physical system was reproduced numerically, usingboth a simplified 2D model and a 3D grid involving complex Voronoi elements. We modeled dissociation using both the equilibrium and the kinetic reaction options in T+H, and we used a range of kinetic parameters for sensitivity analysis and curve fitting. We successfully reproduced the experimental results, which confirmed the empirical data that demonstrated that heattransport was the limiting factor during dissociation. Dissociation was more sensitive to kinetic parameters than anticipated, which indicates that kinetic limitations may be important in short-term core studies and a necessity in such simulations. This is the first time T+H has been used to predict empirical nonmonotonic dissociation behavior, where hydrate dissociation and reformation occurred as parallel events.

Description: Methane hydrate, a potential future energy resource, is known to occur naturally in vast quantities beneath the ocean floor and in permafrost regions. It is important to evaluate how much methane is recoverable from these hydrate reserves. This article introduces the theoretical background of HydrateResSim, the National Energy Technology Laboratory (NETL) methane production simulator for hydrate-containing reservoirs, originally developed for NETL by Lawrence Berkeley National Laboratory (LBNL). It describes the mathematical model that governs the dissociation of methane hydrate by depressurization or thermal stimulation of the system, including the transport of multiple temperature-dependent components in multiple phases through a porous medium. The model equations are obtained by incorporating the multiphase Darcy’s law for gas and liquid into both the mass component balances and the energy conservation equations. Two submodels in HydrateResSim for hydrate dissociation are also considered: a kinetic model and a pure thermodynamic model. Contrary to more traditional reservoir simulations, the set of model unknowns or primary variables in HydrateResSim changes throughout the simulation as a result of the formation or dissociation of ice and hydrate phases during the simulation. The primary variable switch method (PVSM) is used to effectively track these phase changes. The equations are solved by utilizing the implicit time finite-difference method on the grid system, which can properly describe phase appearance or disappearance as well as the boundary conditions. The Newton-Raphson method is used to solve the linear equations after discretization and setup of the Jacobian matrix. We report here the application of HydrateResSim to a three-component, four-phase flow system in order to predict the methane produced from a laboratory-scale reservoir. The first results of HydrateResSim code in a peer-reviewed publication are presented in this article. The numerical solution was verified against the state-of-the art simulator TOUGH+Hydrate. The model was then used to compare twodissociation theories: kinetic and pure equilibrium. Generally, the kinetic model revealed a lower dissociation rate than the equilibrium model. The hydrate dissociation patterns differed significantly when the thermal boundary condition was shifted from adiabatic to constant-temperature. The surface area factor was found to have an important effect on the rate of hydrate dissociation for the kinetic model. The deviation between the kinetic and equilibrium models was found to increase with decreasing surface area factor.

Description: Calculations of the size and density of atmospheric aerosols are complicated by the fact that they can exist at concentrations highly supersaturated with respect to dissolved salts and supercooled with respect to ice. Densities and apparent molar volumes of solutes in aqueous solutions containing the solutes H2SO4, HNO3, HCl, Na2SO4, NaNO3, NaCl, (NH4)2SO4, NH4NO3, and NH4Cl have been critically evaluated and represented using fitted equations from 0 to 50 °C or greater and from infinite dilution to concentrations saturated or supersaturated with respect to the dissolved salts. Using extrapolated densities of high-temperature solutions and melts, the relationship between density and concentration is extended to the hypothetical pure liquid solutes. Above a given reference concentration of a few mol kg−1, it is observed that density increases almost linearly with decreasing temperature, and comparisons with available data below 0 °C suggest that the fitted equations for density can be extrapolated to very low temperatures. As concentration is decreased below the reference concentration, the variation of density with temperature tends to that of water (which decreases as temperature is reduced below 3.98 °C). In this region below the reference concentration, and below 0 °C, densities are calculated using extrapolated apparent molar volumes which are constrained to agree at the reference concentrations with an equation for the directly fitted density. Calculated volume properties agree well with available data at low temperatures, for both concentrated and dilute solutions. Comparisons are made with literature data for temperatures of maximum density. Apparent molar volumes at infinite dilution are consistent, on a single ion basis, to better than ±0.1 cm3 mol−1 from 0 to 50 °C. Volume properties of aqueous NaHSO4, NaOH, and NH3 have also been evaluated, at 25 °C only. In part 2 of this work (ref 1) an ion interaction (Pitzer) model has been used to calculate apparent molar volumes of H2SO4 in 0−3 mol kg−1 aqueous solutions of the pure acid and to represent directly the effect of the HSO4− ↔ H+ + SO42− reaction. The results are incorporated into the treatment of aqueous H2SO4 density described here. Densities and apparent molar volumes from −20 to 50 °C, and from 0 to 100 wt % of solute, are tabulated for the electrolytes listed in the title and have also been incorporated into the extended aerosol inorganics model (E-AIM, http://www.aim.env.uea.ac.uk/aim/aim.php) together with densities of the solid salts and hydrates.

Description: A total of 19 naturally occurring bromophenols, with six new and 13 known structures, were isolated and identified from the methanolic extract of the marine red alga Rhodomela confervoides. The new compounds were identified by spectroscopic methods as 3,4-dibromo-5-((methylsulfonyl)methyl)benzene-1,2-diol (1), 3,4-dibromo-5-((2,3-dihydroxypropoxy)methyl)benzene-1,2-diol (2), 5-(aminomethyl)-3,4-dibromobenzene-1,2-diol (3), 2-(2,3-dibromo-4,5-dihydroxyphenyl)acetic acid (4), 2-methoxy-3-bromo-5-hydroxymethylphenol (5), and (E)-4-(2-bromo-4,5-dihydroxyphenyl)but-3-en-2-one (6). Each compound was evaluated for free radical scavenging activity against DPPH (α,α-diphenyl-β-dipicrylhydrazyl) and ABTS [2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonic acid)diammonium salt] radicals. Most of them exhibited potent activities stronger than or comparable to the positive controls butylated hydroxytoluene (BHT) and ascorbic acid. The results from this study suggest that R. confervoides is an excellent source of natural antioxidants, and inclusion of these antioxidant-rich algal components would likely help prevent the oxidative deterioration of food.

Description: The current difficulty in visualizing the true extent of malignant brain tumors during surgical resection represents one of the major reasons for the poor prognosis of brain tumor patients. Here, we evaluated the ability of a hand-held Raman scanner, guided by surface-enhanced Raman scattering (SERS) nanoparticles, to identify the microscopic tumor extent in a genetically engineered RCAS/tv-a glioblastoma mouse model. In a simulated intraoperative scenario, we tested both a static Raman imaging device and a mobile, hand-held Raman scanner. We show that SERS image-guided resection is more accurate than resection using white light visualization alone. Both methods complemented each other, and correlation with histology showed that SERS nanoparticles accurately outlined the extent of the tumors. Importantly, the hand-held Raman probe not only allowed near real-time scanning, but also detected additional microscopic foci of cancer in the resection bed that were not seen on static SERS images and would otherwise have been missed. This technology has a strong potential for clinical translation because it uses inert gold-silica SERS nanoparticles and a hand-held Raman scanner that can guide brain tumor resection in the operating room.

Description: Consumer preference for natural food ingredients has increased in recent decades, and the natural food colorant market has grown to over one billion dollars annually. A variety of red, orange, and yellow natural colorants are approved and in use, but there still exists a lack of available blue and purple natural colorant options. The occurrence of blue colored compounds in the natural world is relatively rare. The isolation, identification, and characterization of natural blue and purple pigments obtained from underexplored natural sources such as from obscure terrestrial organisms and marine microorganisms will be discussed.

Description: Titanium (Ti) is present as a trace element in seawater at extremely low concentrations (5-350 pM, where 1 pM = 10(-12) mol L(-1)) throughout the water column. Presently, little is known about the marine biogeochemistry of Ti and there is a distinct lack of oceanic measurements of Ti, because of the combined difficulties of trace-metal clean sampling for an element at such low levels and the lack of a suitable shipboard method of analysis. Here, a new cathodic stripping voltammetry procedure is presented for the rapid determination of Ti at pM concentrations in seawater that is capable of being used directly at sea. This method utilizes the catalytic enhancement of the reduction of the complex formed between Cupferron (N-nitrosophenylhydroxylamine) and Ti(IV). While Cupferron itself acts as both a complexing agent and an oxidizing agent, it was found that the optimal sensitivity was with bromate as an auxiliary oxidant. An advantage of this method is that it is useable over the pH range of 5.5-8. Under the conditions employed in this work, detection limits ranged from 5 pM to 12 pM. This new catalytic method is significantly more sensitive than existing methods and has been extensively tested at sea in the Atlantic and Southern Oceans.

Description: Electrolytes can thermodynamically inhibit clathrate hydrate formation by lowering the activity of water in the surrounding liquid phase, causing the hydrates to form at lower temperatures and higher pressures compared to their formation in pure water. However, it has been reported that some thermodynamic hydrate inhibitors (THIs), when doped at low concentrations, could enhance the rate of gas hydrate formation. We here report a systematic study of model natural gas (a mixture of 90% methane and 10% propane) hydrate formation in strong monovalent salt solutions in a broad range of concentrations, using a high pressure automated lag time apparatus (HP-ALTA). HP-ALTA can apply a large number (〉100) of cooling ramps to a sample and construct probability distributions of gas hydrate formation for each sample. The probabilistic interpretation of data enables us to mitigate the stochastic variation inherent in the nucleation probability distributions and facilitates meaningful comparison among different samples. The electrolytes used in this work are lithium chloride (LiCl), lithium bromide (LiBr), lithium iodide (LiI), sodium chloride (NaCl), sodium bromide (NaBr), sodium iodide (NaI), potassium chloride (KCl), potassium bromide (KBr), and potassium iodide (KI). We found that (1) some salts may act as kinetic hydrate promoters at low concentrations; (2) the width of the probability distributions (stochasticity) of natural gas hydrate formation in these salt solutions was significantly narrower than that in pure water. To gain further insight, we extended the study of the solutions of the same nine salts to the formation of ice and model tetrahydrofuran (THF) hydrate for comparison.

Description: Two new natural products, 3 and 4, and their predecessor 7-isocyanoisoneoamphilecta-1(14),15-diene (2), of the rare isoneoamphilectane class of marine diterpenes, along with the known amphilectane diterpenes 6–8, were isolated from the n-hexane extract of the marine sponge Svenzea flava collected at Great Inagua Island, Bahamas. The molecular structures of compounds 3 and 4 were established by spectroscopic (1D/2D NMR, IR, UV, HRMS) methods and confirmed by a series of chemical correlation studies. In a first ever case study of the assignment of the absolute configuration of a molecule based on the isoneoamphilectane carbon skeleton, the absolute configuration of compound 5 was established as 3S,4R,7S,8S,11R,12S,13R by application of vibrational circular dichroism (VCD). In vitro anti-TB screenings revealed that metabolites 2–4 and, in particular, semisynthetic analogue 5, are strong growth inhibitors of Mycobacterium tuberculosis H37Rv.

Description: The conversion of alkylboranes to the corresponding alkanes is classically per-formed via protonolysis of alkylboranes. This simple reaction requires the use of severe reaction conditions, that is, treatment with a carboxylic acid at high temperature (〉150 °C). We report here a mild radical procedure for the transformation of organoboranes to alkanes. 4-tert-Butylcatechol, a well-established radical inhibitor and antioxidant, is acting as a source of hydrogen atoms. An efficient chain reaction is observed due to the exceptional reactivity of phenoxyl radicals toward alkylboranes. The reaction has been applied to a wide range of organoboron derivatives such as B-alkylcatecholboranes, trialkylboranes, pinacolboronates, and alkylboronic acids. Furthermore, the so far elusive rate constants for the hydrogen transfer between secondary alkyl radical and catechol derivatives have been experimentally determined. Interestingly, they are less than 1 order of magnitude slower than that of tin hydride at 80 °C, making catechols particularly attractive for a wide range of transformations involving C−C bond formation.

Description: Chemicals targeting the liver stage (LS) of the malaria parasite are useful for causal prophylaxis of malaria. In this study, four lichen metabolites, evernic acid (1); vulpic acid (2), psoromic acid (3), and, (+)-usnic acid (4), were evaluated against LS parasites of Plasmodium berghei. Inhibition Of P. falciparum blood Stage (BS) parasites was also assessed to determine stage specificity. Compound 4 displayed the highest LS activity and stage specificity (LS IC50 value 2.3 mu M, BS IC50 value 47.3 mu M). The compounds 1 - 3 inhibited one Or more enzymes (Pf FabI, PfFabG, and pfFabZ), from the Plasmodial fatty acid biosynthesis (FAS-II) pathway, a potential drug. target for LS activity. To determine species specificity and to clarify the mechanism of reported antibacterial effects, 1-4 were also evaluated against FabI homologues and Whole cells of various pathogens -(S. aureus, E. coli M. tuberculosis). Molecular modeling studies suggest that lichen acids act indirectly via binding to allosteric sites on the protein surface of the FAS-II enzymes. Potential. toxicity, of compounds was assessed in human hepatocyte and cancer cells (in vitro) as well as in a zebrafish model (in vivo):. This study indicates the therapeutic and prophylactic potential of lichen metabolites as antibacterial and antiplasmodial agents.

Description: Macroalgae have for centuries been consumed whole among the East Asian populations of China, Korea, and Japan. Due to the environment in which they grow, macroalgae produce unique and interesting biologically active compounds. Protein can account for up to 47% of the dry weight of macroalgae depending on species and time of cultivation and harvest. Peptides derived from marcoalgae are proven to have hypotensive effects in the human circulatory system. Hypertension is one of the major, yet controllable, risk factors in cardiovascular disease (CVD). CVD is the main cause of death in Europe, accounting for over 4.3 million deaths each year. In the United States it affects one in three individuals. Hypotensive peptides derived from marine and other sources have already been incorporated into functional foods such as beverages and soups. The purpose of this review is to highlight the potential of heart health peptides from macroalgae and to discuss the feasibility of expanding the variety of foods these peptides may be used in.

Description: The chemical composition of the Caribbean sponge Pandaros acanthifolium was reinvestigated and led to the isolation of 12 new steroidal glycosides, namely, pandarosides E-J (1-6) and their methyl esters (7-12). Their structures were determined on the basis of extensive spectroscopic analyses, including two-dimensional NMR and HRESIMS data. Like the previously isolated pandarosides A-D (13-16), the new compounds 1-12 share an unusual oxidized D-ring and a cis C/D ring junction. The absolute configurations of the aglycones were assigned by interpretation of CD spectra, whereas the absolute configurations of the monosaccharide units were determined by chiral GC analyses of the acid methanolysates. The majority of the metabolites showed in vitro activity against three or four parasitic protozoa. Particularly active were the compounds 3 (pandaroside G) and its methyl ester (9), which potently inhibited the growth of Trypanosoma brucei rhodesiense (IC(50) values 0.78 and 0.038 mu M, respectively) and Leishmania donovani (IC(50)'s 1.3 and 0.051 mu M, respectively).

Description: New indicators for optical CO2 sensors are synthesized in two steps from the commercially available diketo-pyrrolo-pyrrole (DPP) pigments Irgazin Ruby and Irgazin Scarlet. After introduction of bis(2-ethylhexyl) sulfonamide groups via a simple two-step synthesis, the pigments are rendered highly soluble in organic solvents and in polymers and show pH-dependent absorption and emission spectra. The new indicators have molar absorption coefficients in a 20 000–50 000 M–1 cm–1 range, possess quantum yields close to unity, and feature good photostability. The indicators along with a quaternary ammonium base are embedded into ethyl cellulose to give optical carbon dioxide sensors. The absorption and emission spectra of the deprotonated form are bathochromically shifted by more than 100 nm compared to the neutral form (λmax absorption 496–550 nm; λmax emission 564–587 nm). This enables colorimetric read-out and self-referenced ratiometric fluorescence intensity measurements. Importantly, the dynamic range of the sensors based on the new indicators is significantly different (0–10 kPa and 1–100 kPa CO2) that enables a broad variety of applications. New DPP dyes are conveniently prepared from commercially available pigments and represent a new class of colorimetric and fluorescent pH indicators for optical carbon dioxide sensors.

Description: Undaria pinnatifida, commonly known as wakame in Japan, is one species of brown seaweeds containing valuable bioactive organic compounds such as fucoxanthin, a carotenoid, which has numerous functional properties. However, most of the seaweeds that do not meet strict quality standards are normally discarded as wastes or returned to the sea, a situation which is becoming an environmental concern. In this research, supercritical carbon dioxide (SCCO2) extraction was investigated for the isolation of fucoxanthin. SCCO2 extraction experiments were carried out at temperature range of 25–60 °C and pressure range of 20–40 MPa, at a carbon dioxide flow rate of 1.0–4.0 mL/min. Results showed that fucoxanthin recovery closed to 80% could be obtained at 40 °C and 40 MPa in extraction time of 180 min. The recovery increased with decreasing temperature and increasing pressure. Pretreatment with microwave (MW) also enhanced the efficiency of extraction due most likely to disruption of the cell membrane. Application of SCCO2, generally regarded as safe and environmentally benign solvent, for extraction of useful bioactive compounds from unwanted or substandard seaweeds look promising in the near future. The extracts obtained using the method can be utilized as food and pharmaceutical additive, and can be used in the development of new health supplements.