ALBERT

Notes: This is the first of a series of papers giving the solution of the inverse problem in seismic exploration. The acoustic approximation is used together with the assumption that the velocity field has the form 〈displayedItem type="mathematics" xml:id="mu1" numbered="no"〉〈mediaResource alt="image" href="urn:x-wiley:00168025:GPR998:GPR_998_mu1"/〉 . The forward problem is then linearized (thus neglecting multiple reflected waves) and the inverse problem of estimating δ is set up. Its rigorous solution can be obtained using an iterative algorithm, each step consisting of a classical Kirchhoff migration (hyperbola summation) plus a classical forward modeling step (circle summation).

Notes: The response of a seismic model to excitation by a source can be represented in terms of the action of reflection and transmission operators for portions of the structure. This approach provides a flexible framework for both modeling and processing problems.The operator development provides a physical description of the wave propagation process and, via the expansion of reverberation operators, gives a mechanism for assessing the accuracy of approximate developments. The representation suggests new ways of developing modeling algorithms by balancing the computational effort expended on minor and major features of the model.For processing problems, the operator representation shows the relation of processing stages to the seismic wave field and thereby indicates effective sequences of operations. For migration it is possible to specify an ideal pre-stack migration procedure in terms of the inverse of the propagation operators and to examine the problems which need to be overcome by practical algorithms.

Notes: A numerical method is presented for direct interpretation of resistivity sounding measurements. The early part of the resistivity transform curve derived from field observations by standard methods is approximated by a two-layer curve. The resistivity of the first layer is determined from the arithmetic mean of the successive computations which are carried on each of three successive discrete values of the resistivity transform curve. Using this mean value of the resistivity, the thickness of the first layer is computed from the sample values in pairs of the resistivity transform curve. After these determinations, the top layer is removed by Pekeris's reduction equation. The parameters of the second layer are obtained from the discrete values of the reduced transform curve (which corresponds to the second part of the resistivity transform curve) by the same procedure as described for the first layer.The same computational scheme is repeated until the parameters of all intermediate layers are obtained. The resistivity of the substratum is determined from the reduction equation.

Notes: In odd-depth structure the two-way traveltime to each boundary is constrained to be an odd integer. The odd-depth property of a model is exposed to possible refutation under a seismogram test. Test function is a simple transformation of a synthetic seismogram. For an odd-depth model the test function has identically the value 1.The testability of a synthetic seismogram over an odd-depth structure provides a method of deterministic deconvolution. There is no need of specialized assumptions, like the minimum-phase property, about the source wavelet. The deconvolution may be performed in the absence of the early segment of a seismogram.

Notes: Zero-offset-source VSP surveys provide information about the subsurface only within the Fresnel zone centered at the well. Offsetting the source location moves the reflection zones away from the well thus providing lateral cover.Conventional processing of this type of data gives rise to a distorted image of the subsurface. Using a simple ray-tracing scheme, this image may be reconstructed into the more familiar coordinate system of the surface seismic section. This simple data-independent mapping is based on the assumption of horizontal layering and requires a vertical velocity profile.The technique of placing the source away from the borehole was first applied to the single-offset-source VSP survey. However, data from any survey geometry (such as deviated well with rig source, walkaway VSP, etc.) can be mapped to the coordinate system defined by the appropriate seismic section.To obtain the best results from this type of survey the target area must be defined and simple modeling techniques used to optimize the source location(s). These pre-survey modeling methods may also be used to anticipate—and hence avoid a number of problem areas which experience has highlighted.The data from any VSP survey is the result of a realizable experiment and as such obeys the wave equation. This implies that the wave equation may be used to migrate the data to its true subsurface location. Theoretically, such a process is more secure than ray-tracing techniques, although its practice presents many difficulties.

Notes: A mathematical expression for potential of a direct current point source in an inhomoge-neous anisotropic earth is derived. The coefficient of anisotropy is given by f= (σr/σz), where σr and σz are the conductivities parallel and perpendicular to the bedding plane. It is assumed that σz varies with depth, whereas σr varies transversely. This potential may be useful in interpretation of geoelectrical data in specified geological situations. Master curves for Wenner and Schlumberger configurations are presented

Notes: Total magnetic intensity contour maps for the study region (between 2°E to 10°E and 56°N to 60°N) were digitized and converted to a regular grid of 285 × 285 points. The study area measures approximately 444 km × 444 km and the grid spacing is thus 1. 56 km. The International Geomagnetic Reference Field for 1975 was gridded for the above-used net, and from the two data sets a further grid of the ▵T field was generated. A large number of profiles were constructed which were suitable for depth determinations. The regular grid ▵T data is also convenient for the computation of the second vertical derivative. Using the method of vertical prisms of Vacquier et al. (1963), a large suite of curvature-depth indices was measured to complement the depths obtained from the intensity slopes and from boreholes which reach the crystalline basement. The depth to the magnetic basement has been contoured, and the resulting map is shown to be in good agreement with what is known about the deeper geology of the study area.The work reported here is part of a research project supported by Amoco Norway, BP Petroleum Development Ltd, Elf Aquitaine, Esso Exploration and Production, Norwegian Gulf, Norsk Hydro, Mobil Exploration Norway, Norwegian Petroleum Directorate, Royal Norwegian Council for Scientific and Industrial Research (NTNF), Norske Shell, and Statoil.

Notes: Geophysical inversion involves the estimation of the parameters of a postulated earth model from a set of observations. Since the associated model responses can be nonlinear functions of the model parameters, nonlinear least-squares techniques prove to be useful for performing the inversion. A common type of inversion applies iterative damped linear least squares through use of the Marquardt-Levenberg method. Traditionally, this method has been implemented by solving the associated normal equations in conventional ways. However, Singular Value Decomposition (SVD) produces significant improvements in computational precision when applied to the same system of normal equations. Iterative least-squares modeling finds application in a wide variety of geophysical problems. Two examples illustrate the approach: (1) seismic wavelet deconvolution, and (2) the location of a buried wedge from surface gravity data. More generally, nonlinear least-squares inversion can be used to estimate earth models for any set of geophysical observations for which an appropriate mathematical description is available.

Notes: In this study we derive expressions for particle displacement or particle velocity anywhere inside a stratified earth and at its surface due to horizontal torque source located in the top layer. Equivalently, invoking Green's function reciprocity theorem, the solution applies also to the case of a surface or subsurface source when the resulting displacement or velocity is measured within the top layer.In order to evaluate the closed-form analytical solution economically and accurately it is advisable to introduce inelastic attenuation. Causal inelastic attenuation also lends the necessary realism to the computed seismic trace. To provide proof that the analytical solution is indeed correct and applicable to the multilayer case, a thick uniform overburden was assumed to consist of many thin layers. The correctness of the computed particle velocity response can be very simply verified by inspection. The computed response can also serve as a check on other less accurate methods of producing synthetic seismograms, such as the techniques of finite differences, finite elements, and various sophisticated ray-tracing techniques.It is not difficult to construct horizontal surface torque source. It appears that such source is well suited for seismic exploration in areas with a high-velocity surface layer. A realistic source function is analyzed in detail and normalized displacement response evaluated at different incidence angles in the near and the far fields.In an effort to distinguish the features of an SH torque seismogram from a pressure seismogram two models with identical layerings and layer parameters have been set up. As expected the torque seismogram is very different from the compressional seismogram. One desirable feature of a torque seismogram is the fast decay of multiples.Exact synthetic seismograms have many uses; some of them, such as the study of complex interference phenomena, phase change at wide angle reflection, channeling effects, dispersion (geometrical and material), absolute gain, and inelastic attenuation, can be carried out accurately and effortlessly. They can also be used to improve basic processing techniques such as deconvolution and velocity analysis.The numerical evaluation of the analytical solution of the wave equation as described in this paper has a long history. Most of the work leading to this paper was carried out by one of us (M. J. K.) in the years 1957 to 1968 at the Geophysical Research Corporation. However, the full testing of the various computer codes was carried out only very recently at the Phillips Petroleum Company.

Notes: In South and Central Goa iron ore occurs in two parallel belts with the general NW-SE Dharawar trend. The ore occurrence, however, is not continuous. There are barren zones as well as zones of very high concentration in some of which there are mining activities.Landsat MSS data have been interpreted over a zone covering both mineral belts in order to delineate the ore occurrences. As a guide line a known ore-bearing area has been considered along with the unknown zones.On the basis of two-dimensional plotting of gray level values it has been found that the MSS bands 4 and 7 are most suitable for the studies over iron-rich areas in Goa. Two techniques are described here for the processing of the MSS data; the separation of residual from the regional and MSS band-ratioing. It is observed that (i) the gray level residual maps of MSS bands 4 and 7 are of use in demarcating the iron-ore-bearing zones, and (ii) an existing mine, an abandoned mine, and a proved iron ore zone could be delineated by MSS band-ratioing. On the basis of the latter technique, a few areas with ore occurrence potential have been indicated.