ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Engineering General  (3,144)
  • Mutation
  • 1990-1994  (3,434)
  • 1
    ISSN: 1476-5535
    Keywords: Penicillin V acylase ; Beijerinckia indica var.penicillanicum ; Mutation ; Solvent effect
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology , Process Engineering, Biotechnology, Nutrition Technology
    Notes: Summary Beijerinckia indica var.penicillanicum mutant UREMS-5, producing 168% more penicillin V acylase, was obtained by successive treatment with UV, γ-irradiation and ethylmethane sulfonate. Penicillin V acylase production by the mutant strain was resistant to catabolite repression by glucose. Incorporation of glucose, sodium glutamate and vegetable oils in the medium enhanced enzyme production. The maximum specific production of penicillin V acylase was 244 IU/g dry weight of cells. Effect of solvents on hydrolysis of penicillin V by soluble penicillin V acylase and whole cells was studied. Methylene chloride, chloroform and carbon tetrachloride significantly stimulated the rate of penicillin V hydrolysis by whole cells.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 2
    Electronic Resource
    Electronic Resource
    Springer
    Journal of industrial microbiology and biotechnology 8 (1991), S. 99-106 
    ISSN: 1476-5535
    Keywords: Mutation ; UV ; Biodegradation ; Chlorinated organic compound
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology , Process Engineering, Biotechnology, Nutrition Technology
    Notes: Summary In this study, a continuous-flow UV-induced mutation (CUM) device and the CUM device coupled to a selector (CUMS) reactor were fabricated and tested for their ability to enhance the probability of obtaining populations capable of chlorinated organic biodegradation. A mixed culture of bacteria were used as the starting strain for both the CUM and CUMS processes. Populations were obtained from the CUM and CUMS systems capable of 4-chlorobenzoic acid, 2,4-dichlorobenzoic acid and chlorendic acid biodegradation. Non-UV irradiated population served as controls for the experiments and did not demonstrate chlorinated organic biodegradation over the test duration.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 3
    Electronic Resource
    Electronic Resource
    Springer
    Current genetics 18 (1990), S. 441-445 
    ISSN: 1432-0983
    Keywords: Neurospora crassa ; Mutation ; RIP phenomenon
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology
    Notes: Summary In the further analysis of a cross in which the mis-sense allele, am 3, of the Neurospora crassa am (glutamate dehydrogenase) gene was present in one parent together with two ectopic wild-type gene copies, one ascus was identified in which the two ectopic copies had been inactivated by the RIP process whereas the am 3 allele continued to produce its characteristic enzyme variety in active, but heat-sensitive, form. The am 3 allele had also acquired a new HindIII restriction site. It had no detectable methylation. The mutations responsible respectively for the new restriction site and the modified enzyme properties were separated from each other, and from the original am 3 mutation, by selecting for intragenic recombination on either side of the am 3 site. In this way two new effectively wild-type alleles were generated, one characterised by its heat-sensitive and kinetically modified enzyme product and the other by a new HindIII site. These results demonstrate that the RIP phenomenon can be a source of new functional alleles.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 4
    Electronic Resource
    Electronic Resource
    Springer
    Journal of molecular evolution 35 (1992), S. 156-180 
    ISSN: 1432-1432
    Keywords: DNA damage ; DNA repair ; Chromatin ; Evolution ; Nucleosomes ; Nuclear matrix ; Active genes ; Z-DNA ; Sperm ; Mutation ; Molecular clock
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology
    Notes: Summary Some evolutionary consequences of different rates and trends in DNA damage and repair are explained. Different types of DNA damaging agents cause nonrandom lesions along the DNA. The type of DNA sequence motifs to be preferentially attacked depends upon the chemical or physical nature of the assaulting agent and the DNA base composition. Higher-order chromatin structure, the nonrandom nucleosome positioning along the DNA, the absence of nucleosomes from the promoter regions of active genes, curved DNA, the presence of sequence-specific binding proteins, and the torsional strain on the DNA induced by an increased transcriptional activity all are expected to affect rates of damage of individual genes. Furthermore, potential Z-DNA, H-DNA, slippage, and cruciform structures in the regulatory region of some genes or in other genomic loci induced by torsional strain on the DNA are more prone to modification by genotoxic agents. A specific actively transcribed gene may be preferentially damaged over nontranscribed genes only in specific cell types that maintain this gene in active chromatin fractions because of (1) its decondensed chromatin structure, (2) torsional strain in its DNA, (3) absence of nucleosomes from its regulatory region, and (4) altered nucleosome structure in its coding sequence due to the presence of modified histones and HMG proteins. The situation in this regard of germ cell lineages is, of course, the only one to intervene in evolution. Most lesions in DNA such as those caused by UV or DNA alkylating agents tend to diminish the GC content of genomes. Thus, DNA sequences not bound by selective constraints, such as pseudogenes, will show an increase in their AT content during evolution as evidenced by experimental observations. On the other hand, transcriptionally active parts may be repaired at rates higher than inactive parts of the genome, and proliferating cells may display higher repair activities than quiescent cells. This might arise from a tight coupling of the repair process with both transcription and replication, all these processes taking place on the nuclear matrix. Repair activities differ greatly among species, and there is a good correlation between life span and repair among mammals. It is predicted that genes that are transcriptionally active in germ-cell lineages have a lower mutation rate than bulk DNA, a circumstance that is expected to be reflected in evolution. Exception to this rule might be genes containing potential Z-DNA, H-DNA, or cruciform structures in their coding or regulatory regions that appear to be refractory to repair. This study supports the molecular clock hypothesis when applied to one gene within a group of related species and contends that evolutionary rates might vary between genes and gene segments not only as a result of differences in selective constraints but also as a result of differences in the rate of damage minus rate of repair among different segments of chromatin DNA.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 5
    Electronic Resource
    Electronic Resource
    Springer
    Journal of molecular evolution 39 (1994), S. 448-451 
    ISSN: 1432-1432
    Keywords: Synonymous substitution ; Escherichia coli ; Salmonella typhimurium ; Mutation ; Recombination ; Selection
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology
    Notes: Abstract The spatial distribution of synonymous substitutions in enterobacterial genes is investigated. It is shown that synonymous substitutions are significantly clustered in such a way that a synonymous substitution in one codon elevates the rate of synonymous substitution in an adjacent codon by about 10%. The level of clustering does not appear to be related to the level of gene expression, and it is restricted to a range of two or three codons. There are at least three possible explanations: (1) sequence-directed mutagenesis, (2) recombination, and (3) selection.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 6
    Electronic Resource
    Electronic Resource
    Springer
    Plant cell reports 13 (1994), S. 372-376 
    ISSN: 1432-203X
    Keywords: Asparagus officinalis L ; Habituation ; Mutation ; Somatic embryogenesis
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology
    Notes: Summary Somatic embryogenesis from different genotypes of Asparagus officinalis L. could be obtained by in vitro culture of shoot apices. Apices were first cultured on an auxin-rich inducing medium and then transferred onto a hormone-free development medium. All genotypes tested in this way produced a few somatic embryos. In some experiments, during the development phase, a new kind of friable highly embryogenic tissue appeared in a random manner. These tissues could be continuously subcultured on a hormone-free medium and were named embryogenic lines. Five of these embryogenic lines regenerated plants from somatic embryos. These regenerated plants exhibited an increased embryogenic response compared to the parent plants; e.g. apex culture produced somatic embryos without any auxin treatments. For one of the embryogenic lines, a genetic analysis showed that the improved embryogenic response of regenerated plants was controlled by a mendelian dominant monogenic mutation.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 7
    Electronic Resource
    Electronic Resource
    Springer
    Current genetics 26 (1994), S. 281-284 
    ISSN: 1432-0983
    Keywords: Ofloxacin ; Mitochondria ; Mutation ; Recombination ; Topoisomerase ; Yeast
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology
    Notes: Abstract Ofloxacin, a specific inhibitor of bacterial topoisomerase II, is known to inhibit the growth of yeast cells and to induce rho − mutants in the yeast S. cerevisiae. The frequency of ofloxacin-induced petite mutants under non-growth conditions was found to be strongly diminished when the cells were depleted in intramitochondrial ATP. Under optimal conditions of mitochondrial mutagenesis the drug induced mitotic recombination and reverse mutation in diploid strains but failed to cure either killer plasmids or the 2 μm DNA of dividing cells. The sensitivity to ofloxacin of the strains deficient in the DNA strandbreak repair pathway (rad52) was significantly higher then that of the wild-type strains and of the mutants deficient in excision or mutagenic DNA repair. The results are compatible with the idea that the cytotoxic and genetic activity of ofloxacin in yeast probably results from the inhibited DNA ligation function of topoisomerase II creating DNA breaks that are reparable through the recombination repair pathway.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 8
    Electronic Resource
    Electronic Resource
    Springer
    Current genetics 23 (1993), S. 430-434 
    ISSN: 1432-0983
    Keywords: S. cerevisiae ; Mutational homozygosis ; Loss of heterozygosity ; Mutation ; Recombination
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology
    Notes: Abstract A leucine-requiring hybrid of Saccharomyces cerevisiae, homoallelic at the LEU1 locus (leu1–12/leu1–12) and heterozygous for three chromosome-VII genetic markers distal to the LEU1 locus, was employed to inquire: (1) whether spontaneous gene mutation and mitotic segregation of heterozygous markers occur in positive nonrandom association and (2) whether homozygous LEU1/LEU1 mutant diploids are generated. The results demonstrate that gene mutation of leu1–12 to LEU1 and mitotic segregation of heterozygous chromosome-VII markers occur in strong positive nonrandom association, suggesting that the stimulatory DNA lesion is both mutagenic and recombinogenic. In addition, genetic analysis of diploid Leu+ revertants revealed that approximately 3% of mutations of leu1–12 to LEU1 result in LEU1/LEU1 homozygotes. Red-white sectored Leu+ colonies exhibit genotypes that implicate postreplicational chromatid breakage and exchange near the site of leu1–12 reversion, chromosome loss, and subsequent restitution of diploidy, in the sequence of events leading to mutational homozygosis. By analogy, diploid cell populations can yield variants homozygous for novel recessive gene mutations at biologically significant rates. Mutational homozygosis may be relevant to both carcinogenesis and the evolution of asexual diploid organisms.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 9
    ISSN: 1432-072X
    Keywords: Fatty acids ; Mortierella alpina ; ω3-Desaturation ; Mutation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology
    Notes: Abstract A mutant considered to be defective in the conversion of n-6 to n-3 fatty acids (ω3-desaturation) was derived from a Δ5-desaturation-defective mutant (Mut44) of Mortierella alpina 1S-4, after treating its spores with N-methyl-N′-nitro-N-nitrosoguanidine. This mutant cannot produce 8(Z),11(Z),14(Z),17(Z)-eicosatetraenoic acid or any other n-3 fatty acids, of which about 10% was found in its parental strain upon cultivation at 12°C. The mutant's growth rate was comparable to that of the parental strain when grown at 28°C, but it became much slower when the mutant grew at 12°C, at which the lag phase for Mut44 was about 2 d but 5 d for the mutant.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 10
    ISSN: 1432-072X
    Keywords: Temperature ; Mutation ; Thermotolerance ; Escherichia coli ; Salmonella typhimurium ; Pseudomonas aeruginosoa ; DNA gyrase ; gyrA ; Nalidixic acid
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology
    Notes: Abstract A prolonged incubation of Escherichia, Salmonella or Pseudomonas at 48°C with nalidixic acid selected mutants (T48) able to grow at 48°C. A prolonged incubation at 54°C of the T48 mutants selected mutants (T54) able to grow at 54°C. These mutants were susceptible to the same bacteriophages as the original mesophilic strains. Auxotrophic phenotypes of Escherichia coli and Salmonella typhimurium mesophilic parents were demonstrated by these mutants if they were cultivated on minimal agar with cellobiose at 48°C or 54°C or on a minimal agar with glucose at 37°C. The T48 alleles mapped in the gyrA region of E. coli or S. typhimurium chromosome. In S. typhimurium the T54 alleles, which permit growth at 54°C, were shown by cotransductional analysis to be linked to gyrA.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 11
    Electronic Resource
    Electronic Resource
    Springer
    Archives of microbiology 159 (1993), S. 98-100 
    ISSN: 1432-072X
    Keywords: Prophage induction ; Weigle reactivation ; Mutation ; Filamentation ; Nitrofurantoin ; Vibrio cholerae el tor
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology
    Notes: Abstract Treatment of Vibrio cholerae el tor strain SLH22(J) with nitrofurantoin induced dose-dependent prophage ‘kappa’, the maximum induction being 6-fold the spontaneous induction level. UV-inactivated ‘kappa’ phages were Weigle reactivated, the maximum Weigle factor being 1.8 and 2.0 respectively in nitrofurantoin and UV pretreated el tor strain H218 Smr. Nitrofurantoin treatment also caused significant filamentation of the el tor strain H218 Smr and mutation of these cells from ampicillin sensitivity to ampicillin resistance. The levels of the four SOS-like responses induced by this drug were low but significant.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 12
    Electronic Resource
    Electronic Resource
    Springer
    Journal of mathematical biology 33 (1994), S. 111-137 
    ISSN: 1432-1416
    Keywords: B-cells ; Immune system ; Idiotypic networks ; Mutation ; Replicator equations
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology , Mathematics
    Notes: Abstract In order to evaluate the role of idiotypic networks in the operation of the immune system a number of mathematical models have been formulated. Here we examine a class of B-cell models in which cell proliferation is governed by a non-negative, unimodal, symmetric response function f(h), where the field h summarizes the effect of the network on a single clone. We show that by transforming into relative concentrations, the B-cell network equations can be brought into a form that closely resembles the replicator equation. We then show that when the total number of clones in a network is conserved, the dynamics of the network can be represented by the dynamics of a replicator equation. The number of equilibria and their stability are then characterized using methods developed for the study of second-order replicator equations. Analogies with standard Lotka-Volterra equations are also indicated. A particularly interesting result of our analysis is the fact that even though the immune network equations are not second-order, the number and stability of their equilibria can be obtained by a superposition of second-order replicator systems. As a consequence, the problem of finding all of the equilibrium points of the nonlinear network equations can be reduced to solving linear equations.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 13
    Electronic Resource
    Electronic Resource
    Springer
    Journal of mathematical biology 30 (1992), S. 597-632 
    ISSN: 1432-1416
    Keywords: Autocatalysis ; Mutation ; Perturbation theory ; Qualitative analysis ; Replication dynamics
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology , Mathematics
    Notes: Abstract A class of kinetic equations describing catalysed and template induced replication, and mutation is introduced. This ODE in its most general form is split into two vector fields, a replication and a mutation field. The mutation field is considered as a perturbation of the replicator equation. The perturbation expansion is a Taylor series in a mutation parameter λ. First, second and higher order contributions are computed by means of the conventional Rayleigh-Schrödinger approach. Qualitative shifts in the positions of rest points and limit cycles on the boundary of the physically meaningful part of concentration space are predicted from flow topologies. The results of the topological analysis are summarized in two theorems which turned out to be useful in applications: the rest point migration theorem (RPM) and the limit cycle migration theorem (LCM). Quantitative expressions for the shifts of rest points are computed directly from the perturbation expansion. The concept is applied to a collection of selected examples from biophysical chemistry and biology.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 14
    Electronic Resource
    Electronic Resource
    Springer
    The journal of membrane biology 139 (1994), S. 203-212 
    ISSN: 1432-1424
    Keywords: Mg2+ current ; Mutation ; Paramecium ; Intracellular Mg2+ homeostasis
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology , Chemistry and Pharmacology
    Notes: Abstract “Eccentric” is a newly-isolated mutant of Paramecium tetraurelia that fails to swim backwards in response to Mg2+. In the wild type, this backward swimming results from Mg2+ influx via a Mg2+-specific ion conductance (I Mg. Voltage-clamp analysis confirmed that, as suspected, step changes in membrane potential over a physiological range fail to elicit I Mg from eccentric. Further electrophysiological investigation revealed a number of additional ion-current defects in eccentric: (i) The Ca2+ current activated upon depolarization inactivates more slowly in eccentric than in the wild type, and it requires longer to recover from this inactivation. (ii) The Ca2+-dependent Na+ current deactivates significantly faster in the mutant, (iii) The two K+ currents observed upon hyperpolarization are reduced by 〉60% in eccentric. It is difficult to envision how these varied pleiotropic effects could result from loss of a single ion current. Rather, they suggest that the eccentric mutation affects a global regulatory system. Two plausible hypotheses are discussed.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 15
    Electronic Resource
    Electronic Resource
    Springer
    Journal of mathematical biology 30 (1992), S. 597-631 
    ISSN: 1432-1416
    Keywords: Autocatalysis ; Mutation ; Perturbation theory ; Qualitative analysis ; Replication dynamics
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology , Mathematics
    Notes: Abstract A class of kinetic equations describing catalysed and template induced replication, and mutation is introduced. This ODE in its most general form is split into two vector fields, a replication and a mutation field. The mutation field is considered as a perturbation of the replicator equation. The perturbation expansion is a Taylor series in a mutation parameter λ. First, second and higher order contributions are computed by means of the conventional Rayleigh-Schrödinger approach. Qualitative shifts in the positions of rest points and limit cycles on the boundary of the physically meaningful part of concentration space are predicted from flow topologies. The results of the topological analysis are summarized in two theorems which turned out to be useful in applications: the rest point migration theorem (RPM) and the limit cycle migration theorem (LCM). Quantitative expressions for the shifts of rest points are computed directly from the perturbation expansion. The concept is applied to a collection of selected examples from biophysical chemistry and biology.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 16
    Electronic Resource
    Electronic Resource
    Springer
    Journal of mathematical biology 31 (1993), S. 123-132 
    ISSN: 1432-1416
    Keywords: Genealogy ; Coalescent ; Mutation ; Migration ; Markov chain
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology , Mathematics
    Notes: Abstract The genealogical process of neutral genes with mutation in geographically structured populations is investigated. Following Watterson [24], the sampled genes are partitioned into two types, old equivalence classes and new equivalence classes. The model is described by a bivariate continuous time Markov chain as an interactive particle system. Some results are obtained in the two-population model and the stepping stone model with symmetric nearest-neighbour migration.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 17
    Electronic Resource
    Electronic Resource
    Springer
    Journal of mathematical biology 32 (1993), S. 33-44 
    ISSN: 1432-1416
    Keywords: Mutation ; Selection ; Random drift ; Muller's ratchet
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology , Mathematics
    Notes: Abstract Two independently derived theories predict upper limits to the mutation rate beyond which evolution cannot be controlled by natural selection. One is the theory of Muller's ratchet, explaining the low phylogenetic age of parthenogenetic clones, the other one is the theory of error thresholds, predicting the maximal information content of selfreplicating molecules in prebiotic evolution. Both theories are based on similiar mathematical models but reach qualitatively different conclusions. Muller's ratchet only works in finite populations, while error thresholds are a deterministic phenomenon. In this paper it is shown that this discrepancy is due to different assumptions about the fitness values the selfreplicative units are allowed to assume. If no lower limit for the fitness values is assumed then the deterministic equilibrium frequency of the currently best genotype is strictly positive, no matter how strong mutation is, and random drift is required to cause its extinction (Muller's ratchet). On the other hand, positive lower limits for the fitness values lead to zero equilibrium frequencies in the deterministic description provided the mutation rate is high enough and no back mutations occur.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 18
    Electronic Resource
    Electronic Resource
    Springer
    Journal of mathematical biology 32 (1994), S. 193-218 
    ISSN: 1432-1416
    Keywords: Selection ; Mutation ; Mutation load ; Quantitative genetic traits
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology , Mathematics
    Notes: Abstract Haldane (1937) showed that the reduction of equilibrium mean fitness in an infinite population due to recurrent deleterious mutations depends only on the mutation rate but not on the harmfulness of mutants. His analysis, as well as more recent ones (cf. Crow 1970), ignored back mutation. The purpose of the present paper is to extend these results to arbitrary mutation patterns among alleles and to quantitative genetic traits. We derive first-order approximations for the equilibrium mean fitness (and the mutation load) and determine the order of the error term. For a metric trait under mutation-stabilizing-selection balance our result differs qualitatively from that of Crow and Kimura (1964), whose analysis is based on a Gaussian assumption. Our general approach also yields a mathematical proof that the variance under the usual mutation-stabilizing-selection model is, to first order, µ/s (the house-of-cards approximation) as µ/s tends to zero. This holds for arbitrary mutant distributions and does not require that the population mean coincide with the optimum. We show how the mutant distribution determines the order of the error term, and thus the accuracy of the house-of-cards approximation. Upper and lower bounds to the equilibrium variance are derived that deviate only to second order as µ/s tends to zero. The multilocus case is treated under the assumption of global linkage equilibrium.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 19
    Electronic Resource
    Electronic Resource
    Springer
    Journal of mathematical biology 30 (1991), S. 199-213 
    ISSN: 1432-1416
    Keywords: Polygenic dynamics ; Quantitative trait ; Selection ; Mutation ; Cumulants ; Generating function
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology , Mathematics
    Notes: Abstract A new approach for describing the evolution of polygenic traits subject to selection and mutation is presented. Differential equations for the change of cumulants of the allelic frequency distribution at a particular locus and for the cumulants of the distributions of genotypic and phenotypic values are derived. The derivation is based on the assumptions of random mating, no sex differences, absence of random drift, additive gene action, linkage equilibrium, and Hardy-Weinberg proportions. Cumulants are a set of parameters that, like moments, describe the shape of a probability density. Compared with moments, however, they have properties that make them a much more convenient tool for investigating polygenic traits. Applications to directional and stabilizing selection are given.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 20
    Electronic Resource
    Electronic Resource
    Springer
    Theoretical and applied genetics 87 (1994), S. 657-667 
    ISSN: 1432-2242
    Keywords: Transposable elements ; Mutation ; Evolution ; DNA repair ; Gene conversion
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology
    Notes: Abstract The mobile DNAs of the Mutator system of maize (Zea mays) are exceptional both in structure and diversity. So far, six subfamilies of Mu elements have been discovered; all Mu elements share highly conserved terminal inverted repeats (TIRs), but each sub-family is defined by internal sequences that are apparently unrelated to the internal sequences of any other Mu subfamily. The Mu1/Mu2 subfamily of elements was created by the acquisition of a portion of a standard maize gene (termed MRS-A) within two Mu TIRs. Beside the unusually long (185–359 bp) and diverse TIRs found on all of these elements, other direct and inverted repeats are often found either within the central portion of a Mu element or within a TIR. Our computer analyses have shown that sequence duplications (mostly short direct repeats interrupted by a few base pairs) are common in non-autonomous members of the Mutator, Ac/Ds, and Spm(En) systems. These duplications are often tightly associated with the element-internal end of the TIRs. Comparisons of Mu element sequences have indicated that they share more terminal components than previously reported; all subfamilies have at least the most terminal 215 bp, at one end or the other, of the 359-bp Mu5 TIR. These data suggest that many Mu element subfamilies were generated from a parental element that had termini like those of Mu5. With the Mu5 TIRs as a standard, it was possible to determine that elements like Mu4 could have had their unusual TIRs created through a three-step process involving (1) addition of sequences to interrupt one TIR, (2) formation of a stem-loop structure by one strand of the element, and (3) a subsequent DNA repair/gene conversion event that duplicated the insertion(s) within the other TIR. A similar repair/conversion extending from a TIR stem into loop DNA could explain the additional inverted repeat sequences added to the internal ends of the Mu4 and Mu7 TIRs. This same basic mechanism was found to be capable of generating new Mu element subfamilies. After endonucleolytic attack of the loop within the stem-loop structure, repair/conversion of the gap could occur as an intermolecular event to generate novel internal sequences and, therefore, a new Mu element subfamily. Evidence supporting and expanding this model of new Mu element subfamily creation was identified in the sequence of MRS-A.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 21
    ISSN: 1617-4623
    Keywords: Rice ; Tetraploid irradiation ; Genome rearrangement ; rDNA ; Mutation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology
    Notes: Abstract The organization of tandemly repeated sequences of ribosomal DNA (rDNA) in rice mutants derived from γ-irradiated tetraploids was analyzed. Southern hybridization analysis of nuclear DNA revealed that most of the intergenic spacers (IGSs) in mutant rDNA are replaced concertedly by new molecular species. The new IGSs are produced by the amplification of a subrepeat of about 250 bp. Results obtained from sequence analyses indicate that various intermediate molecular species of the subrepeat were formed during structuring of the IGS region and that many rearrangements occurred between them. These findings demonstrate the effectiveness of recurrent irradiation of tetraploids for inducing artificial genome rearrangement, and also indicate the extreme plasticity and variability of genome structure in plants.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 22
    ISSN: 1617-4623
    Keywords: TOL plasmid ; Biodegradation ; Pseudornonas putida ; Evolution ; Mutation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology
    Notes: Abstract TOL plasmid pWW0 from Pseudomonas putida mt-2 encodes catabolic enzymes required for the oxidation of toluene and xylenes. The structural genes for these catabolic enzymes are clustered into two operons, the xylCMABN operon, which encodes a set of enzymes required for the transformation of toluene/xylenes to benzoate/toluates, and the xylXYZLTEGFJQKIH operon, which encodes a set of enzymes required for the transformation of benzoate/toluates to Krebs cycle intermediates. The latter operon can be divided physically and functionally into two parts, the xylXYZL cluster, which is involved in the transformation of benzoate/toluates to (methyl)catechols, and the xylTEGFJQKIH cluster, which is involved in the transformation of (methyl)catechols to Krebs cycle intermediates. Genes isofunctional to xylXYZL are present in Acinetobacter calcoaceticus, and constitute a benzoate-degradative pathway, while xylTEGFJQKIH homologous encoding enzymes of a methylphenol-degradative pathway and a naphthalene-degradative pathway are present on plasmid pVI150 from P. putida CF600, and on plasmid NAH7 from P. putida PpG7, respectively. Comparison of the nucleotide sequences of the xylXYZLTEGFJQKIH genes with other isofunctional genes suggested that the xylTEGFJQKIH genes on the TOL plasmid diverged from these homologues 20 to 50 million years ago, while the xylXYZL genes diverged from the A. calcoaceticus homologues 100 to 200 million years ago. In codons where amino acids are not conserved, the substitution rate in the third base was higher than that in synonymous codons. This result was interpreted as indicating that both single and multiple nucleotide substitutions contributed to the amino acid-substituting mutations, and hence to enzyme evolution. This observation seems to be general because mammalian globin genes exhibit the same tendency.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 23
    Electronic Resource
    Electronic Resource
    Springer
    Pharmacy world & science 16 (1994), S. 55-61 
    ISSN: 1573-739X
    Keywords: AMP deaminase/deliciency ; Deficiency diseases ; Genetics, biochemical ; Mutation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract In man, there are at least four isoforms of adenosine monophosphate deaminase (AMPD): myoadenylate deaminase in skeletal muscle, the L isoform in liver, and the E1 and E2 isoforms in erythrocytes. Myoadenylafe deaminase is encoded by the AMPD1 gene located on chromosome 1 p13-p21, the L isoform by the AMPD2 gene, and both isoforms in erythrocytes by the AMPD3 gene. Myoadenylate deaminase deficiency is found in 2–3% of all muscle biopsies. The inborn type of myoadenylate deaminase deficiency is caused by a single mutant allele harbouring two mutations: C34→T (Gin→Stop) and C143→T (Pro-48→Leu). Population studies revealed a frequency of the mutant allele of 0.12 in Caucasian Americans and Germans. The C34→T mutation is located in exon 2, which is alternatively spliced in part of the AMPD1 transcript in human muscle. Since the second mutation does not affect enzyme function, alternatively spliced mRNA encodes a catalytically active enzyme. Only one patient with a disorder linked to liver AMPD has been described so far. In this patient the decreased inhibition of this enzyme by GTP resulted in uric acid overproduction and gout. A complete lack of erythrocyte AMPD activity is found in asymptomatic subjects. The molecular basis of both disorders is not yet known.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 24
    ISSN: 1617-4623
    Keywords: Retroposon ; Transposable element ; Mutation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology
    Notes: Summary We analysed the structure of the white locus of Drosophila melanogaster in a family of related white mutants. The white-one mutant has bleach white eyes, and a Doc transposable element is inserted into the promoter region of the white locus. The DNA sequence of this Doc insertion was determined, and showed it to be closely related to other Drosophila melanogaster retroposons such as the I factor and the F, G and jockey elements. There are two long open reading frames, which encode a putative nucleic acid binding protein and a putative reverse transcriptase, respectively. Two independent, partially pigmented derivatives were analysed by cloning sequences from this region. In white-honey a transposable element of the retroviral class, B104, is inserted within the Doe element. In white-eosin there is an insertion within the Doc element of a 190 by sequence that appears to be a member of a novel family of transposable elements. This pogo element is of the same structural class as the Drosophila melanogaster P and hobo elements. These data are consistent with the hypothesis that the Doc retroposon cannot excise, and that, for the white-one mutation, flies with altered phenotypes are most often generated by the insertion of additional transposable elements.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 25
    Electronic Resource
    Electronic Resource
    Springer
    Molecular genetics and genomics 244 (1994), S. 295-302 
    ISSN: 1617-4623
    Keywords: DNA repair ; Recombination ; Virulence ; Mutation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology
    Notes: Abstract The recA + gene of Vibrio cholerae O1 has been cloned, its nucleotide sequence determined and the product characterized. A deletion mutation was constructed in the recA gene and mutants showed the typical sensitivity to UV and to DNA-damaging agents, as well as an inability to mediate homologous DNA recombination. The chromosomal recA deletion mutants in V. cholerae do not show altered virulence in the infant mouse cholera model and are thus ideal strains for use in complementation studies.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 26
    ISSN: 1617-4623
    Keywords: Streptococcus pyogenes ; vir regulon ; emm-related genes ; Recombination ; Mutation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology
    Notes: Abstract One of the most prevalent genetic lineages of group A streptococci (GAS) harbors a genomic locus termed the large vir regulon, which contains an emm gene encoding the antiphagocytic M protein, and structurally related fcrA and enn (emm-related) genes encoding immunoglobulin-binding proteins. In the present study more than 100 large vir regulons from 42 different GAS serotypes were analyzed by PCR and partial DNA sequencing. On comparing these data to published sequences, sites of mutational and putative recombinational events were identified and ordered with respect to their intra/intergenic or intra/intergenomic nature. The emm-related genes were found to display small intragenic deletions or insertions, were completely deleted from, or newly inserted into the genome, or were fused to adjacent genes. Intergenomic exchanges of complete emm-related genes, or segments thereof, between different vir regulons were detected. Most of these processes seem to involve short flanking direct repeats. Occasionally, the structural changes could be correlated with changes in the functions of the encoded proteins.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 27
    ISSN: 1617-4623
    Keywords: Deficiency mapping ; Mutation ; Telomere Chromosome structure
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology
    Notes: Abstract A mutator, mu2, in Drosophila melanogaster has been identified recently that potentiates the recovery of terminal deficiencies. The deleted chromosomes behave as if they had been capped; that is, they are protected from degradation and from fusion with other chromosome fragments. The mutator maps near the telomere on the left arm of chromosome 3. Using the selectable marker Aprt, 150 deficiencies for region 62 of the cytological map have been recovered. These deficiencies identify the map position of mu2 as 62B11-C1. A yeast artificial chromosome spanning this region has been subcloned into lambda phage, and the positions of deficiency breakpoints on either side of the mu2 gene have been identified within the subclones. These positions limit the location of the left end of the gene to a 23 kb region. In the course of these experiments, three additional, presumptive mutant alleles were identified, suggesting that other mutator alleles remain undiscovered in many standard laboratory stocks.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 28
    ISSN: 1617-4623
    Keywords: Hordeum vulgare L. ; Nitrite reduction ; Mutation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology
    Notes: Summary Eleven green individuals were isolated when 95000 M2 plants of barley (Hordeum vulgare L.), mutagenised with azide in the M1, were screened for nitrite accumulation in their leaves after nitrate treatment in the light. The selected plants were maintained in aerated liquid culture solution containing glutamine as sole nitrogen source. Not all plants survived to flowering and some others that did were not fertile. One of the selected plants, STA3999, from the cultivar Tweed could be crossed to the wild-type cultivar and analysis of the F2 progeny showed that leaf nitrite accumulation was due to a recessive mutation in a single nuclear gene, which has been designated Nir1. The homozygous nir1 mutant could be maintained to flowering in liquid culture with either glutamine or ammonium as sole nitrogen source, but died within 14 days after transfer to compost. The nitrite reductase cross-reacting material seen in nitrate-treated wild-type plants could not be detected in either the leaf or the root of the homozygous nir1 mutant. Nitrite reductase activity, measured with dithionite-reduced methyl viologen as electron donor, of the nitrate-treated homozygous nir1 mutant was much reduced but NADH-nitrate reductase activity was elevated compared to wild-type plants. We conclude that the Nir1 locus determines the formation of nitrite reductase apoprotein in both the leaf and root of barley and speculate that it represents either the nitrite reductase apoprotein gene locus or, less likely, a regulatory locus whose product is required for the synthesis of nitrite reductase, but not nitrate reductase. Elevation of NADH-nitrate reductase activity in the nir1 mutant suggests a regulatory perturbation in the expression of the Narl gene.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 29
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 9 (1993), S. 639-647 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: An a posteriori point-wise outflow flux recovery scheme which capitalizes on the hyperbolic nature of convection-dominated transport models is proposed. The scheme is seen to be robust in that it can be applied to any upwind finite-difference or finite-element approximation, and gives a superconvergent approximation to the outflow flux.
    Additional Material: 2 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 30
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 9 (1993), S. 757-766 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: A geometrically non-linear global/local technique was developed and tested. This technique uses separate global and local finite-element models. Iteration is used to enforce equilibrium between the global and local models. The results of this initial study suggest that the technique can be used to reduce both computer memory and CPU requirements.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 31
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 9 (1993), S. 785-785 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 32
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 9 (1993), S. 773-784 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: A general line search concept is presented, which can be applied for the solution of non-linear equations in the presence of constraint conditions as in arc-length methods in a consistent manner.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 33
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 9 (1993), S. 767-772 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: The generalized geometric programming algorithm GGP has been found to be one of the better algorithms for optimizing algebraic functions subject to algebraic constraints. The paper discusses two problems with the GGP algorithm presented by Avriel et al. (1980). The first problem is that, because of the way that constraint tolerances are checked, the checks may pass even when a constraint is violated beyond the acceptable tolerance. This problem can affect an acceleration technique suggested for the algorithm. This paper presents two possible solutions to this problem. The second problem is the algorithm's weakness in handling equality constraints. This problem seems to especially affect the ‘Phase I’ part of the algorithm, which finds a feasible solution from a random starting point. While extensions have been made to get around this limitation, no discussion on why the original algorithm has problems with equality constraints has been made. This paper discusses why the problems exist.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 34
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 9 (1993) 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 35
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 9 (1993), S. 797-803 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: The paper presents a filtering algorithm which corrects the results of measurements of certain physical quantities if any additional information about the measured values is known. The algorithm is very effective in one-dimensional as well as in two-dimensional problems where additional constraints are presented in the form of differential equations. For example, this technique can be used to correct the measurements of certain dynamic quantities if some information about motion of examined bodies is known. It can also be used to correct the strain field measurements if the conditions of continuity of strain field are included.
    Additional Material: 2 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 36
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 9 (1993), S. 805-814 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: A computer simulation is made of cellular convection in an anisotropic atmosphere in an attempt to more closely approximate the observed values with those obtained from mathematical models. A finite-element Galerkin technique, with Taylor approximation and Crank-Nicolson, is employed and comparisons are made with the author's earlier finite-element models of isotropic convection and with finite-difference models. It is found that postulates from physics on the effect of anisotropy on cellular atmospheric convection, with its increase in the aspect ratio, are well modelled with this finite-element technique.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 37
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 9 (1993), S. 815-824 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: The use of micromechanically based constitutive equations for contact interfaces leads to technically relevant parameters to ill-conditioned finite-element equations. In the paper an augmented Lagrangian technique is employed to overcome this difficulty and to provide a good converging algorithm.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 38
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 9 (1993), S. 883-888 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: Elastic contact between a thick shell of revolution and a rigid plate in the case when the plate is brought into contact with the shell by giving a finite displacement to the plate is analysed by the finite-element method. Field-consistent higher-order strain-displacement relations with vanishing shear stresses on the surfaces are used. A finite element based on these relations is developed and used for the analysis. The contact conditions are imposed by use of the Lagrangian multipliers method, and the resulting minimization problem is solved iteratively. This procedure will lead to reduced memory requirements and computation time.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 39
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 9 (1993), S. 889-896 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: An explicit formulation and a procedure for the computation of isotropic tensor-valued tensor functions is discussed. The formulation is based on a spectral decomposition in terms of second-order eigenvalue bases, which avoids the costly computation of eigenvectors. As an important result a compact structure of the fourth-order derivatives of general second-order isotropic tensor functions is presented.
    Additional Material: 2 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 40
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 9 (1993), S. 933-935 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 41
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 9 (1993) 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 42
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 9 (1993), S. 937-949 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: For some heterogeneous materials, it is not practical to model the microstructure directly using traditional finite elements. Furthermore, it is not always accurate to use homogenized properties. Macro elements have been developed which permit microstructure within a single element. These macro elements performed well in initial tests.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 43
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 9 (1993), S. 957-974 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: The paper deals with the solution of the quasi-harmonic equation by the finite element method in a domain with corners on its boundary. A mapping technique, which can be used for locating the nodes of standard isoparametric elements in a subgrid (patch) of finite elements in the vicinity of a corner singularity point, is presented. The equations of the mapping are based on the analytical singular solution of the problem. Some analytical and numerical results to show the efficiency of the technique are presented.
    Additional Material: 12 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 44
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 9 (1993), S. 975-987 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: An arbitrary Lagrangian-Eulerian model is described for the prediction of metal flow in a steady-state forming process. The formulation is shown to be capable of dealing with free surface and boundary friction; the coupling with thermal effects is also considered. The numerical techniques are based on the finite elements for spatial discretization of the momentum equation and on an explicit integration scheme for discretization relative to time. The mass and energy equations are integrated by a finite-volume method. Details on the application to an orthogonal cutting process are given in the final Section of the paper.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 45
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 9 (1993), S. 951-956 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: A procedure was implemented to determine the optimum values for the two parameters of the Zienkiewicz three-level time schemes which could be utilized for the numerical solution of a system of ordinary differential equations. A multivariable search method was implemented to estimate optimum values for these parameters. The resultant optimum three-level time scheme produced very accurate results, satisfied physical reality, and did not produce any oscillations for the various problems that were investigated. The optimum values for the two parameters β and γ in the three-level scheme were β = 0·50005 and γ = 1·0007. A comparison was made between this optimum scheme and other existing three-level time schemes. The optimum scheme demonstrated superior results for all the problems that were analysed. However, the results of the optimization analysis produced a set of optimum parameters that were identical to the values that would reduce the general three-level time scheme into a central-difference two-level time scheme, i.e. β = 1/2 and γ = 1.
    Additional Material: 1 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 46
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 9 (1993), S. 989-1004 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: A new efficient formulation of the 36 degree-of-freedom conforming shallow shell element of an arbitrary triangular shape is presented. This formulation is based on natural co-ordinates and independently assumed natural strain fields, and applied to shallow shell analysis. The 3-node element incorporates the normal displacement and its first and second derivatives plus the tangential displacements and their first derivatives at each vertex. A closed form of the element stiffness matrix is achieved. The form of the stiffness matrix derived in this formulation explicitly reveals the essence of the shallow shell theory.The presented approach results in avoiding definite integrals and matrix inversions, and permits operation with lower-order numerical matrices, which are the same for all elements. The example applications presented demonstrate that accurate predictions of stresses as well as displacements are obtained with only a few elements.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 47
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 9 (1993), S. 1005-1011 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: The formulation of a straight beam element to eliminate the shear locking phenomenon is presented. The element is based on curvature so that the bending energy is fully represented, and the shear strain energy is incorporated into the formulation by the equilibrium equation. Four examples are chosen to verify the concept of the element employed and its capability of the analysis. The solutions obtained reveal that the element describes the behaviour of the straight beam quite exactly and efficiently, showing no locking and that it is also applicable to the analysis of both thin and thick straight beams.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 48
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 9 (1993), S. 1013-1015 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 49
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994) 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 50
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 1-9 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: An iterative method is introduced for computing second-order partial derivatives (sensitivities) of eigenvalues and eigenvectors of matrices which depend on a number of real design parameters. Numerical tests confirm the viability of the method and support our theoretical analysis. Alternative methods are reviewed briefly and compared with the one proposed here.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 51
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 11-19 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: In the formulation of the semi-Loof element the rotation of the tangent plane is derived from the interpolation of the transverse displacement, while the rotation of the normal is interpolated separately by another set of shape functions. The geometric stiffness matrix can be formulated by use of either of the two rotation representations. It is demonstrated that the use of the tangent plane representation in the geometric stiffness matrix is far superior to the common form at present.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 52
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 21-32 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: An efficient solution to boundary-value problems may be based on the application of a suitably truncated T-complete set of Trefftz functions over individual subdomains and on linking the fields by a least-squares procedure. Although it yields a symmetric system of linear equations, this approach as originally presented by Zielinski and Zienkiewicz is not suited for implementation into FE codes. The present paper presents two equivalent formulations, which take respectively the form of the finite (FE) and non-conventional boundary-element (BE) approach. Both allow the resulting simultaneous equations to be assembled following the standard direct stiffness methods and can readily be implemented into existing FE codes.As in the conventional p-method, the accuracy may be controlled within large limits without increasing the number of elements. The present approach allows substantial saving in computer time in comparison with the so-called hybrid-Trefftz (HT) elements, though the assumed displacement fields are identical. The practical efficiency of the new T-element approach is assessed on the problem of stress concentration in a symmetrically compressed perforated panel.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 53
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 167-178 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: A sixth-order polynomial shape function is developed for BIE analysis. The function is applied over only three-noded elements, but with the support for the function extending over adjacent elements. This avoids the oscillations near the ends of the range which otherwise are characteristic of high-order polynomial interpolation. Various test problems are explored, and it is shown that results as accurate as those from conventional quadratic elements are obtained with larger nodal spacings, and thus giving the potential for significant reductions in matrix storage requirements and solution times.
    Additional Material: 9 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 54
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 155-166 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: A finite element formulation based on superposition is proposed for a lifting aerofoil in incompressible potential flow. An accuracy improvement technique for the singularity at the aerofoil trailing edge is discussed. It is shown that the quarter-node quadrilateral element can be readily employed to simulate this singularity. It is also demonstrated that the circulation in the flow field can be easily represented by a single constraint equation rather than introducing an artificial cut line in the mesh. The influence of finite-element mesh size on solution accuracy and the correct form of the boundary condition have been investigated as well. Numerical examples are given for both steady and quasisteady Joukowski aerofoils of various thicknesses and at a range of incidences. In all test cases, good agreement is observed between the analytical solution and the numerical result.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 55
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994) 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 56
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 183-194 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: An 8-node element (HMITC) for 3D non-linear analysis of solids is presented. The new element is based on an element developed by Wilson and Ibrahimbegovic, that incorporates incompatible modes, and on the method of mixed interpolation of tonsorial components. The HMITC element does not contain spurious zero energy modes and satisfies Irons' Patch Test. The numerical experimentation indicates that the HMITC has good performance even with distorted meshes.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 57
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 203-215 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: In this paper we consider an explicit finite-element method, with elements adaptively oriented in space-time, for the solution of one-dimensional conservation laws, extending previous work dealing with linear convection-diffusion and incompressible flow. In particular we consider Burgers' equation and the compressible Euler equations.
    Additional Material: 8 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 58
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 195-201 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: A numerical method, based on neural-network-based functions, for solving partial differential equations is reported in the paper. Using a ‘universal approximator’ based on a neural network and point collocation, the numerical problem of solving the partial differential equation is transformed to an unconstrained minimization problem. The method is extremely easy to implement and is suitable for obtaining an approximate solution in a short period of time. The technique is illustrated with the aid of two numerical examples.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 59
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 217-225 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: An efficient algorithm for consideration of axial and cyclic symmetry in the boundary-element method is presented. The appropriate transformation relationships was derived. The algorithm is then implemented in a boundary element program for the analysis of 2D elastostatic problems. Through analysis of typical problems the validity of the algorithm and its implementation is verified. A high level of accuracy and substantial reduction in computer time and storage was achieved.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 60
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 227-235 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: The diffusion of oxygen into an absorbing medium as an example of an implicit moving boundary problem has been dealt with by a number of authors using various numerical techniques, and, where appropriate, approximate analytical expressions. To evaluate the time for complete absorption, extrapolation is usually employed. An unconditionally stable explicit numerical scheme that avoids the limitations of such methods is presented and tested herein. Unlike existing schemes this method is fully numerical; it avoids the large array size, generally required for existing methods, by using a variable-length time step. The time for complete absorption emerges from the final step in the normal computing procedure with no recourse to extrapolation. Furthermore, owing to the implicit condition prevailing at the moving boundary, no iterations are needed to evaluate the time step required for the moving boundary to move a single space increment. The numerical results obtained compare very favourably with those due to earlier authors.
    Additional Material: 1 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 61
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 237-248 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: In the paper we have developed a new formulation for solution of structural-acoustic coupling problems by boundary elements using the multiple reciprocity method. It is assumed that the structure is composed of plate components and is excited by the external or the internal noise source. The efficiency of the proposed formulation becomes especially remarkable if the boundary-value problem is to be solved repeatedly for different values of frequency. The accuracy of the numerical computations has been compared with the analytical solution in a test example.
    Additional Material: 2 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 62
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 257-265 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: Techniques for stress- and strain-controlled in situ homogenization of inelastic periodic composites are presented. The results of homogenization computations on a specific elastoplastic composite solid are then employed to validate the form of an orthotropic elastoplasticity model with a tensorial kinematic hardening law.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 63
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 249-255 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: An algorithm for evaluation of friction in general contact-impact interfaces is described. The algorithm is based on an explicit finite-element method. Coulomb's friction law is assumed. The defence node algorithm is used such that the sticking condition can be imposed with the Lagrange multiplier method even in explicit dynamic analysis. The algorithm is supposed to be applicable in general situations, including large deformations of the contact-impact bodies and large relative sliding between the contact-impact boundaries. Numerical results are presented to demonstrate the performance of the algorithm.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 64
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 275-277 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 65
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994) 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 66
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 267-273 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: A generalization of the r(1-m)/m strain singularity of higher-order isoparametric elements is presented. It is shown that, by variable placement of the side nodes between their original and singular positions, the point of singularity sensed by the element can be controlled. The transition elements have a strain singularity outside their domain. The singular and non-singular elements are elements are special cases of the general mapping. The transition elements, together with the singular isoparametric elements, can be used for solving crack problems.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 67
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 279-290 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: In the design of members with flaws, it is necessary to keep the stress intensity factor K of any sharp crack below the fracture toughness Kcr of the materials. Stress-intensity factor equations for the more common basic specimen geometries and various loading conditions are available in the literature. The application of these equations to complex structures involves geometric problems such as the identification of the outline of each member and the sizing of the equivalent specimen for each flaw. The paper gives a response to such difficulties.
    Additional Material: 11 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 68
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 303-312 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: A simple, yet storage-effective ‘linear’ programming code is given. The assumption of non-negative variables is bypassed without increasing the size of the problem. Furthermore, the objective is allowed to be summed over not just linear, but also concave, functions. A specific truss topology optimization example is shown.
    Additional Material: 1 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 69
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 291-296 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: We propose in this paper a nine-point, fourth-order difference method for the numerical solution of the quasilinear Poisson equation \documentclass{article}\pagestyle{empty}\begin{document}$$ Au_{zz} + \frac{1}{r}u_r + Bu_{rr} = f\left({r,z,u,u_r,u_z} \right) $$\end{document} with appropriate boundary conditions. The method is based on five evaluations of f. The numerical results of four problems obtained using this method are listed. The results demonstrate the fourth-order accuracy of the method.
    Additional Material: 4 Tab.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 70
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 297-302 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: Singularly perturbed second-order elliptic equations with boundary layers are considered. These may be considered as model problems for the advection of some quantity such as heat or a pollutant in a flow field or as linear approximations to the Navier-Stokes equations for fluid flow. Numerical methods composed of central-difference operators on special piece-wise-uniform meshes are constructed for the above problems. Numerical results are obtained which show that these methods give approximate solutions with error estimates that are independent of the singular perturbation parameter. An open theoretical problem is posed.
    Additional Material: 2 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 71
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 313-320 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: In the paper we present a superconvergent patch recovery technique for obtaining higher-order-accurate finite-element solutions and thus a postprocessed type of L2 norm error estimate. Two modifications make our procedure different from the one proposed by Zienkiewicz and Zhu (1992), in which higher-order-accurate derivatives of the finite-element solution at nodes are determined. Firstly, the recovery process is made for element, not for nodes. An ‘element patch’, which represents the union of an element under consideration and the surrounding elements, is introduced. Secondly, the local error estimate is calculated directly from the improved solution for this element. Numerical tests on both 1D and 2D model problems show that this method can provide an asymptotically exact a posteriori L2 norm error estimate if the used element possesses superconvergent points for the solutions.
    Additional Material: 7 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 72
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 321-331 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: A new approach to developing serendipity quadrilateral infinite elements is presented. Using these elements universal matrices for quasiharmonic equation are developed. For a particular member of the family these matrices are independent of the size and shape of the element. Using these matrices the element stiffness matrix can be generated in a simpler manner by taking into account the size and shape of the element.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 73
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 333-338 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: A new global secant relaxation (GSR)-method-based improvement procedure is used to improve the overall convergency performance of the modified Newton-Raphson iteration in carrying out the solution of discrete systems resulting from the finite-element discretization of a certain class of structural problems involving non-linear deformation behaviour.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 74
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 339-353 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: Theoretical and experimental analysis of free-surface electrohydrodynamic flow is fragmented and incomplete. Simulation studies of this phenomenon are further limited by the inherent complexities in the modelling process. In this note a mathematical model is developed to analyse free-surface electrohydrodynamic flow in two dimensions, and preliminary results of the simulation are described. The configurations examined include electrified conducting surfaces, the dielectrophoretic forces, and a conducting jet. The simulation is compared with analytical results in the first two investigations and is shown to be quite accurate. In the last simulation it is demonstrated that in the initial formation of a conducting jet, a 10 per cent increase in applied voltage results in about a 10 per cent increase in fluid velocity.
    Additional Material: 7 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 75
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 355-357 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 76
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 359-360 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 77
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994) 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 78
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 361-371 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: The dual reciprocity boundary element method, first proposed by Nardini and Brebbia (1982, 1985), is a powerful technique for solving elliptic partial differential equations. Adopting this approach, a singular volume integral, which needs to be evaluated with a traditional boundary element method, can be converted into a boundary integral. However, when the governing equation is of a certain type, this conversion fails due to the singularities being introduced inside the physical domain and on the boundary arising by differentiating distance functions. We avoid these artificially created singularities by constructing a transformation which leads to improved numerical results.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 79
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 743-749 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: This is a study about one of the core questions in the GMRES(k) method regarding the obtaining of vector yk for the least-squares problem, argminy |Hky - β(n)e1|2 (see Saad and Schultz1). We propose a simple but efficient approach to the resolution of this problem and a low cost computation of the residual and the residual norm, including both in a complete and detailed FGMRES(k) algorithm. The whole algorithm of minimization only involves two backward substitutions with triangular matrices and a dot product. The residual and the residual norm are computed, making use of results in the least-squares problem.
    Additional Material: 1 Tab.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 80
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 759-760 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 81
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994), S. 761-762 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 82
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    Communications in Numerical Methods in Engineering 10 (1994) 
    ISSN: 1069-8299
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 83
    Electronic Resource
    Electronic Resource
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 29 (1990), S. 37-55 
    ISSN: 0029-5981
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: Fully automatic three-dimensional mesh generation is a fundamental requirement for automating the numerical solution of partial differential equations. Two techniques in particular - the octree and Delaunay approaches - have been used towards this end. A method that combines both approaches to fully automatic mesh generation is presented here. The resulting algorithm provides the linear growth rate and divide-and-conquer approach of the octree method with the simplicity and optimal properties of the Delaunay triangulation.
    Additional Material: 19 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 84
    ISSN: 0029-5981
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: Adopting an updated Lagrange approach, the general framework for the fully non-linear analysis of curved shells is developed using a simple quadrilateral C0 model (HMSH5). The governing equations are derived based on a consistent linearization of an incremental mixed variational principle of the modified Hellinger/Reissner type with independent assumptions for displacement and strain fields. Emphasis is placed on devising effective solution procedures to deal with large rotations in space, finite stretches and generalized rate-type material models. In particular, a geometrically exact scheme for configuration update is developed by making use of the so-called exponential mapping algorithm, and the resulting element was shown to exhibit a quadratic rate of (asymptotic) convergence in solving practical shell problems with Newton-Raphson type iterative schemes. For the purpose of updating the spatial stress field of the element, an ‘objective’ generalized midpoint integration rule is utilized, which relies crucially on the concept of polar decomposition for the deformation gradient, and is in keeping with the underlying mixed method. Finally, the effectiveness and practical usefulness of the HMSH5 element are demonstrated through a number of test cases involving beams, plates and shells undergoing very large displacements and rotations.
    Additional Material: 13 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 85
    Electronic Resource
    Electronic Resource
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 29 (1990), S. 483-514 
    ISSN: 0029-5981
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: Some constitutive and computational aspects of finite deformation plasticity are discussed. Attention is restricted to multiplicative theories of plasticity, in which the deformation gradients are assumed to be decomposable into elastic and plastic terms. It is shown by way of consistent linearization of momentum balance that geometric terms arise which are associated with the motion of the intermediate configuration and which in general render the tangent operator non-symmetric even for associated plastic flow. Both explicit (i.e. no equilibrium iteration) and implicit finite element formulations are considered. An assumed strain formulation is used to accommodate the near-incompressibility associated with fully developed isochoric plastic flow. As an example of explicit integration, the rate tangent modulus method is reviewed in some detail. An implicit scheme is derived for which the consistent tangents, resulting in quadratic convergence of the equilibrium iterations, can be written out in closed form for arbitrary material models. All the geometrical terms associated with the motion of the intermediate configuration and the treatment of incompressibility are given explicitly. Examples of application to void growth and coalescence and to crack tip blunting are developed which illustrate the performance of the implicit method.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 86
    Electronic Resource
    Electronic Resource
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 29 (1990), S. 599-617 
    ISSN: 0029-5981
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: This study, dealing with model reduction for thermal diffusion, describes the numerical techniques used: the Eitelberg, Marshall and aggregation methods. The non-linear model of a heat transmission tube, to which these methods are applied, is then described, pointing out the necessary initial algebraic treatment for reduction. Finally the outputs of the complete model and of several reduced ones are compared for some characteristic variations of the inputs. For this problem, the Eitelberg and Marshall methods, which can be used with a high coefficient of reduction, are well adapted.
    Additional Material: 9 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 87
    Electronic Resource
    Electronic Resource
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 29 (1990), S. 699-717 
    ISSN: 0029-5981
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: The Finite Element Iterative Method (FEIM) is extended to the analysis of asymptotic fields of materials with non-linear behaviour. It is used in the investigation of the asymptotic field of an interfacial crack of power law hardening materials. The material is assumed to deform according to the total deformation theory of plasticity. The results of the analysis provide evidence to support the hypothesis that the asymptotic field can be cast in the form of the HRR-singularity multiplied by a function of the product form. This function can be written as a series of oscillatory functions, similar to those encountered in an elastic field, each of which is valid over a substantial range of the process zone. The real part of these terms depends on the loading mode, process zone size as well as material properties; it is, however, very small compared to the HRR-singularity. The imaginary part which gives the phase shift is much smaller than the elastic value and is a weak function of the hardening power and the size of the process zone of interest; it eventually vanished at extremely small distances.
    Additional Material: 9 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 88
    Electronic Resource
    Electronic Resource
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 29 (1990), S. 775-783 
    ISSN: 0029-5981
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: Force fields computed directly from strains calculated in a displacement type finite element description of a structural element of varying sectional rigidities show extraneous oscillations. The origin of these oscillations is traced to the fact that the displacement type finite element procedure determines strains derived from the displacement field in a least squares correct sense and that force resultants computed using these strain fields and the actual sectional rigidities result in unwanted oscillations. It is necessary to introduce the concept of redistributed assumed force resultant fields that maintain a ‘consistent’ relationship to the strain fields and also are orthogonal to these strain functions. In this paper, the Hu-Washizu theorem is invoked to justify the introduction of an orthogonally correct reconstituted assumed force resultant field which will then be free of extraneous oscillations. The quadratic isoparametric tapered bar element serves to illustrate the underlying principles.It follows that the extremely general Hu-Washizu principle is the most practical procedure of implementing an assumed force resultant, assumed strain displacement type formulation to introduce consistency and thereby remove problems associated with field-inconsistency (such as cause locking in constrained media elasticity) and force resultant oscillations due to varying sectional properties.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 89
    Electronic Resource
    Electronic Resource
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 29 (1990), S. 801-809 
    ISSN: 0029-5981
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: New 8-node solid elements with two parallel faces and one traction-free cylindrical surface are derived using the assumed stress hybrid model. Six new expressions of stress components are developed by using four stress functions and cylindrical co-ordinates, so that the normal stress σz on the plane perpendicular to the two parallel faces varies as a parabola, and the assumed stress field satisfies the equilibrium equations as well as the traction-free conditions over the cylindrical boundary. The assumed stress field also satisfies the compatibility conditions when the new element is degenerated into the 2-dimensional case. Examples have clearly demonstrated that these present special elements are far superior in predicting the stress concentration factors, the distributions of circumferential stresses and the normal stress σz.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 90
    Electronic Resource
    Electronic Resource
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 29 (1990), S. 861-880 
    ISSN: 0029-5981
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: Explicit integration across the thickness for three-dimensional degenerated shell finite elements is analysed. For this purpose a modifed formulation is proposed. The Jacobian matrix of the physical-parameter spaces transformation is decomposed into a product of ‘in-middle-surface’ and ‘out-of-middle-surface’ terms. This enables an expansion to be carried out of the strain-displacement matrix into power series of the thickness variable. Explicit integration is then performed and the corresponding formulae of the stiffness and mass matrices are given. The possibility of ‘locking’ for thin structures is explained. The analysis is applied to homogeneous and multilayered structures. Numerical applications for linear problems are given in the last part of the paper.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 91
    Electronic Resource
    Electronic Resource
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 29 (1990), S. 913-933 
    ISSN: 0029-5981
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: Non-linear responses of dam-reservoir systems are not well understood, because of the lack of an exact time-domain solution for the far field (extending to infinity) of the fluid. This paper presents a procedure for efficient time-domain analyses. It is based on a semi-analytical solution and is suitable for the determination of the interactive behaviour of dam-reservoir systems.In this formulation, the fluid domain is divided into a near (to the dam) field, which is finite, and a far field extending to infinity. Arbitrary shapes of the upstream face of the dam, and of the bottom of the reservoir floor in the near field, are presumed. Furthermore, the far field is assumed to have a constant depth. The irregular near field is modelled by using the finite element method. A time-domain semi-analytical solution is obtained for the far field. For a vertical dam subjected to earthquake and ramp loadings, numerical solutions obtained compared well with the piecewise exact form of the analytical solution.
    Additional Material: 14 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 92
    Electronic Resource
    Electronic Resource
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 29 (1990), S. 1003-1020 
    ISSN: 0029-5981
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: An improved formulation for solving 2D transient scalar wave propagation problems by the Boundary Element Method (BEM) is presented. The kernels presented are simpler and better behaved than those that have appeared in the published literature. An appropriate set of temporal shape functions for linear variation is used. For spatial variations isoparametric quadratic elements are used. All of these represent significant improvements over the present level of sophistication in the analysis of 2D transient scalar problems. The algorithm is implemented in a general purpose boundary element code known as GPBEST.
    Additional Material: 11 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 93
    Electronic Resource
    Electronic Resource
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 29 (1990), S. 1049-1063 
    ISSN: 0029-5981
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: A new method of modelling the radiation effect in a time-domain finite element analysis of semi-infinite solids is proposed. The domain to be analysed is divided into a finite, interior region and a semi-infinite, exterior region. The standard finite elements are used to model the interior region. An infinite element is used to model the semi-infinite region. The main feature of the proposed method is the selection of semi-infinite shape functions to develop the infinite element. A procedure is proposed whereby the necessary shape functions are derived directly from frequency-domain analytical mode shapes. The interior and exterior regions are coupled by enforcing displacement continuity at the interface. The validity of the method is demonstrated in this paper by analysing a two-dimensional, linear (damped), anti-plane, shear-wave (plane Love-wave) propagation problem. The results obtained by the proposed method are compared with those obtained by direct finite element analysis with a fixed boundary placed sufficiently far from the location of loading to avoid wave reflections.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 94
    Electronic Resource
    Electronic Resource
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 29 (1990), S. 141-159 
    ISSN: 0029-5981
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: The Lanczos algorithm has proved to be a powerful solution method not only for finding the eigenvalues but for solving linear systems of equations. In this work a new implementation of the algorithm is presented for solving linear systems of equations with a sequence of right-hand sides. The versions of the method proposed in the past treat the right-hand side vectors successively by keeping the tridiagonal matrix and the orthonormal basis in fast or secondary storage. The new technique handles all approximations to the solution vectors simultaneously without the necessity for keeping the tridiagonal matrix or the orthonormal basis in fast or secondary storage. Thus, when the first solution vector has converged to a required accuracy good approximations to the remaining solution vectors have simultaneously been obtained. It then takes fewer iterations to reach the final accuracy by working separately on each of the remaining vectors.
    Additional Material: 8 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 95
    Electronic Resource
    Electronic Resource
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 29 (1990), S. 197-209 
    ISSN: 0029-5981
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: This paper presents the development of a finite element analysis based on an anisotropic model of continuum damage mechanics theory proposed recently by the authors for ductile fracture under non-proportional loading. The condition of non-proportional loading is formulated by introducing a dynamic co-ordinate system of principal damage allowing the principal direction of damage during the loading to rotate accordingly.The finite element analysis developed under non-proportional loading is applied to predict the crack initiation load of a centre-cracked plate under uniform loading. The predicted load agrees satisfactorily with those determined experimentally with centre-cracked thin plates made of aluminium alloy 2024-T3. The analysis also reveals under non-proportional loading the hysteresis effect of the principal directions of damage and stress. In addition, the influence of varying anisotropic damage coefficients on the crack initiation load and the crack tip displacement profile is also examined. The larger the degree of the anisotropy, the higher the crack initiation load. The magnitude of the crack tip displacement profile is found to be proportional to the degree of material anisotropy.
    Additional Material: 8 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 96
    Electronic Resource
    Electronic Resource
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 29 (1990), S. 449-452 
    ISSN: 0029-5981
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 97
    Electronic Resource
    Electronic Resource
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 29 (1990), S. 473-482 
    ISSN: 0029-5981
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: This paper presents an alternative to the subspace iteration and Lanczos techniques, both of which are now used to solve partial eigenvalues and eigenvectors of large generalized linear first order symmetric matrix systems. It is based on non-linear optimization of a modified Rayleigh quotient. The elements of the eigenvector are the decision variables. Orthogonality constraints with respect to the two matrices are incorporated in the sequential unconstrained optimization scheme. By imposing normality with respect to one of the matrices, the Hessian matrix reduces to a much simpler form for which the Woodburry transformation may be used. This, in combination with the fact that the banded structure of the matrices is maintained, results in a number of operations of the same order as the two standard methods. Shifting is readily integrated. Numerical comparison with existing techniques demonstrate the practicality of this method.
    Additional Material: 7 Tab.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 98
    Electronic Resource
    Electronic Resource
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 29 (1990), S. 453-472 
    ISSN: 0029-5981
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: The superposition of a rigid body mode on a body should result in a corresponding change in displacement values but should not affect the stresses. However, in the numerical solution by the boundary element method (BEM) large errors may be obtained for displacements and stresses if a rigid body mode is present in the input data. To eliminate the effects of the rigid body mode on the numerical accuracy of the solution, the fundamental solutions for displacements must be correctly interpreted and used. The rigid body mode may be unknowingly present in the boundary condition data. It may be present because the boundary data are not known accurately. Or it may be present if the displacement values at the support have been computed from a separate analysis. A rigid body mode may arise due to the collocation nature of satisfying the boundary conditions. The point values of the applied load at the collocation point may not satisfy equilibrium. Or the point values of the specified displacements may not satisfy the condition of zero translation and rotation. For bodies under pure traction, we know that the analytical solution can contain an arbitrary amount of rigid body mode. Numerically, however, some unknown value is assigned to this rigid body mode. It might be desirable (for example in limit analysis) to eliminate the rigid body mode from the displacements to obtain deformation of a point with respect to a point on the body. In addition, knowledge and elimination of the rigid body mode is necessary for the implementation of a scheme described by this author in an earlier work. The importance of the earlier work is that it reduced the sensitivity of the BEM to changes and errors in the input data. In this paper the causes, and the effects of the rigid body mode on the BEM, the correct interpretation of the fundamental solution for displacements and an algorithm for determining and accounting for the rigid body mode are discussed. A numerical example validates the ideas in this paper for the indirect version. The algorithm for the direct version is presented without a numerical example in the Appendices.
    Additional Material: 2 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 99
    Electronic Resource
    Electronic Resource
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 29 (1990), S. 559-578 
    ISSN: 0029-5981
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: A panel method using source and doublet singularity has been proposed to solve for subcritical aerodynamics of a two dimensional steady and unsteady aerofoil. The source singularities are placed on the aerofoil surface. The doublet singularity is distributed by a function along the chordline of the aerofoil; this distribution is further projected downstream into infinity.The aerodynamics of an oscillating aerofoil is investigated. The governing unsteady linearized potential equation has a Hankel function as its fundamental solution, which is a source type function. A combination of source and doublet singularity is therefore used for solving the unsteady compressible problem by means of the panel method, this methodology being an extension of a steady aerofoil formulation. Incremental effects of profile change in aerofoil and wake geometry are accounted for. A surface boundary condition is applied on the stationary mean aerofoil surface with time dependent geometrical changes accounted for. An unsteady Kutta condition of equal pressure across the trailing edge is assumed. Results are presented on the aerodynamic influence of Mach number, oscillating frequency parameter, angle of incidence and change of pivoting point. Results are also compared with linear theory, a subsonic experimental result and a subcritical solution of a transonic model.
    Additional Material: 16 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 100
    Electronic Resource
    Electronic Resource
    Chichester [u.a.] : Wiley-Blackwell
    International Journal for Numerical Methods in Engineering 29 (1990), S. 647-663 
    ISSN: 0029-5981
    Keywords: Engineering ; Engineering General
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mathematics , Technology
    Notes: A new algorithm family taking into account the entire loading process in a single large time increment is proposed to compute structures with physical non-linearities and is tested on some examples in elastoplasticity. The method considerably reduces the number of transfers between local and global levels, hence the numerical cost of calculation is also diminished.
    Additional Material: 14 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...