ALBERT

Description: Volcanic ash fall-out represents a serious hazard for air and road traffic. The forecasting models used to predict its time–space evolution require information about the core characteristics of volcanic particles, such as their granulometry. Typically, such information is gained by the spot direct observation of the ash collected at the ground or by using expensive instrumentation. In this paper, a vision-based methodology aimed at the estimation of ash granulometry is presented. A dedicated image processing paradigm was developed and implemented in LabVIEW™. The methodology was validated experimentally using digital reference images resembling different operating conditions. The outcome of the assessment procedure was very encouraging, showing an accuracy of the image processing algorithm of 1.76%.

Description: Background: After preterm birth, infants are at high risk for delays in language development. A promising intervention to reduce this risk is represented by the exposure to parental voices through book-reading in Neonatal Intensive Care Units (NICU). This study investigated the possible advantages of book-reading to preterm neonates during their NICU stay on their subsequent language development. Methods: 100 families of preterm infants were recruited. The parents of 55 preterm infants (Reading Group) received a colored picture-book on NICU admission and were supported to read to their neonate as often as possible and to continue after hospital discharge. Forty-five infants (Control Group) were recruited before the beginning of the intervention. Infant language development was assessed with the Hearing and Language quotients of the Griffith Mental Development Scale at the corrected ages of 3, 6, 9, 12, 18 and 24 months. Results: Regardless of group membership, Hearing and Language mean quotients decreased between 9 and 18 months; nevertheless, this decrease was considerably reduced in the Reading group, compared to the Control Group. Conclusions: Reading in NICUs represents a suitable intervention that could positively influence language development and parent-infant relationships in preterm children. The study findings support its implementation as a preventive measure.

Description: The electric power industry sector has become increasingly aware of how counterproductive voltage sag affects distribution network systems (DNS). The voltage sag backfires disastrously at the demand load side and affects equipment in DNS. To settle the voltage sag issue, this paper achieved its primary purpose to mitigate the voltage sag based on integrating a hydrogen fuel cell (HFC) with the DNS using a distribution static synchronous compensator (D-STATCOM) system. Besides, this paper discusses the challenges and opportunities of D-STATCOM in DNS. In this paper, using HFC is well-designed, modeled, and simulated to mitigate the voltage sag in DNS with a positive impact on the environment and an immediate response to the issue of the injection of voltage. Furthermore, this modeling and controller are particularly suitable in terms of cost-effectiveness as well as reliability based on the adaptive network fuzzy inference system (ANFIS), fuzzy logic system (FLC), and proportional–integral (P-I). The effectiveness of the MATLAB simulation is confirmed by implementing the system and carrying out a DNS connection, obtaining efficiencies over 94.5% at three-phase fault for values of injection voltage in HFC D-STATCOM using a P-I controller. Moreover, the HFC D-STATCOM using FLC proved capable of supporting the network by 97.00%. The HFC D-STATCOM based ANFIS proved capable of supporting the network by 98.00% in the DNS.

Description: Horizontal wells can significantly improve the gas production and are expected to be an efficient exploitation method for the industrialization of natural gas hydrates (NGHs) in the future. However, the near-wellbore hydrate is highly prone to decomposition during the drilling process, owing to the disturbance aroused by the factors such as the drilling fluid temperature, pressure, and salinity. These issues can result in the engineering accidents such as bit sticking and wellbore instability, which are required for further investigations. This paper studies the characteristics of drilling fluid invasion into the marine NGH reservoir with varied drilling fluid parameters via numerical simulation. The effects of the drilling fluid parameters on the decomposition behavior of near-wellbore hydrates are presented. The simulating results show that the adjustments of drilling fluid density within the mud safety window have limited effects on the NGH decomposition, meanwhile the hydrates reservoir is most sensitive to the drilling fluid temperature variation. If the drilling fluid temperature grows considerably due to improper control, the range of the hydrates decomposition around the horizontal well tends to expand, which then aggravates wellbore instability. When the drilling fluid salinity varies in the range of 3.5–7.5%, the increase in the ion concentration speeds up the hydrate decomposition, which is adverse to maintaining wellbore stability.

Description: Fault tolerance in IoT systems is challenging to overcome due to its complexity, dynamicity, and heterogeneity. IoT systems are typically designed and constructed in layers. Every layer has its requirements and fault tolerance strategies. However, errors in one layer can propagate and cause effects on others. Thus, it is impractical to consider a centralized fault tolerance approach for an entire system. Consequently, it is vital to consider multiple layers in order to enable collaboration and information exchange when addressing fault tolerance. The purpose of this study is to propose a multi-layer fault tolerance approach, granting interconnection among IoT system layers, allowing information exchange and collaboration in order to attain the property of dependability. Therefore, we define an event-driven framework called FaTEMa (Fault Tolerance Event Manager) that creates a dedicated fault-related communication channel in order to propagate events across the levels of the system. The implemented framework assist with error detection and continued service. Additionally, it offers extension points to support heterogeneous communication protocols and evolve new capabilities. Our empirical results show that introducing FaTEMa provided improvements to the error detection and error resolution time, consequently improving system availability. In addition, the use of Fatema provided a reliability improvement and a reduction in the number of failures produced.

Description: Due to their low density, magnesium alloys are very appealing for light-weight constructions. However, the use of the most common magnesium alloy, AZ91 (Mg 9 wt.% Al, 1 wt.% Zn), is limited to temperatures below 150 °C due to creep failure. Several alloys with an improved creep resistance have been developed in the past, for example the alloy MRI 230D or Ca-alloyed AZ91 variants. However, there is an ongoing discussion in the literature regarding the mechanisms of the improved creep resistance. One factor claimed to be responsible for the improved creep resistance is the intermetallic phases which form during casting. Another possible explanation is an increased creep resistance due to the formation of precipitates. To gain more insight into the improved creep resistance of MRI 230D, nanoindentation measurements have been performed on the different phases of as-cast, creep-deformed and heat-treated samples of MRI 230D and Ca-alloyed AZ91 variants. These nanoindentation measurements clearly show that the intermetallic phase (IP) of the alloy MRI 230D does not lose strength during creep deformation in contrast to the Ca-alloyed AZ91 variants. High-temperature nanoindentation measurements performed at 200 °C clearly show that the intermetallic phases of the MRI 230D alloy maintain their strength. This is in clear contrast to the Ca-alloyed AZ91 variants, where the IP is significantly softer at 200 °C than at room temperature. Atom probe measurements have been used to gain insight into the differences in terms of chemical composition between the IPs of MRI 230D and the Ca-alloyed AZ91 variants in order to understand the dissimilar behaviour in terms of strength loss with increasing temperature.

Description: Apart from numerous technical challenges, the transition towards a carbon-neutral energy supply is greatly hindered by limited economic feasibility of renewable energy sources. This results in their slow and bounded penetration in both commercial and residential sectors that are responsible for over 40% of final energy consumption. This paper aims to demonstrate that combined application of sophisticated planning methodologies at building-level and presents incentive mechanisms for renewables that can result in prosumers, featuring hybrid renewable energy systems (HRES), with economic performance comparable to that of conventional energy systems. The presented research enhances existing planning methodologies by integrating appliance-level demand side management into the decision process and investigates its effect on the planning problem. Moreover, the proposed methodology features an innovative and holistic approach that simultaneously assess electrical and thermal domain in both an isolated and grid-connected context. The analyzed hybrid system consists of solar photovoltaic, wind turbine and battery with thermal supply featuring solar thermal collector and a ground-source heat pump. Overall optimization problem is modeled as a mixed-integer linear program, while ranking of all feasible alternatives is made by the multicriteria decision-making algorithm against several technological, economic, and environmental criteria. A real-life scenario of energy system retrofit for a building in the United Kingdom was employed to demonstrate overall cost savings of 12% in the present market and regulation context.

Description: ArcheoBot is a prototype of a Telegram Bot: it is an experimental prototype that builds on the common digital experiences of the authors of this article, aiming to offer a quick, powerful, easy to use tool. It aims to serve archaeological and topographical investigations quickly and to interface with other software for the management of collected data.

Description: This study presents a 2-D lidar odometry based on an ICP (iterative closest point) variant used in a simple and straightforward platform that achieves real-time and low-drift performance. With a designated multi-scale feature extraction procedure, the lidar cloud information can be utilized at multiple levels and the speed of data association can be accelerated according to the multi-scale data structure, thereby achieving robust feature extraction and fast scan-matching algorithms. First, on a large scale, the lidar point cloud data are classified according to the curvature into two parts: smooth collection and rough collection. Then, on a small scale, noise and unstable points in the smooth or rough collection are filtered, and edge points and corner points are extracted. Then, the proposed tangent-vector-pairs based on edge and corner points are applied to evaluate the rotation term, which is significant for producing a stable solution in motion estimation. We compare our performance with two excellent open-source SLAM algorithms, Cartographer and Hector SLAM, using collected and open-access datasets in structured indoor environments. The results indicate that our method can achieve better accuracy.

Description: In the single-polyelectrolyte aqueous phase separation (APS) approach, membranes are prepared by precipitating a weak polyelectrolyte from a concentrated aqueous solution using a pH switch. This has proven to be a versatile and more sustainable method compared to conventional approaches as it significantly reduces the use of organic solvents. Poly(styrene-alt-maleic acid) (PSaMA) is a polymer that has been extensively investigated for APS and has been the basis for both open and dense membranes with good performances. These membranes are chemically crosslinked and, in this work, we further investigated ultrafiltration (UF) and nanofiltration (NF) membranes prepared with PSaMA for their stability in various organic solvents and under different pH conditions. It was shown that these membranes had stable performances in both isopropanol (IPA) and toluene, and a slightly reduced performance in N-methyl-2-pyrollidone (NMP). However, PSaMA did not perform well as a selective layer in these solvents, indicating that the real opportunity would be to use the UF-type PSaMA membranes as solvent-stable support membranes. Additionally, the membranes proved to be stable in an acidic-to-neutral pH regime (pH 2–7); and, due to the pH-responsive nature of PSaMA, for the NF membranes, a pH-dependent retention of Mg2+ and SO42− ions was observed and, for the UF membranes, a strong responsive behavior was observed, where the pH can be used to control the membrane permeability. However, long-term exposure to elevated pH conditions (pH 8–10) resulted in severe swelling of the NF membranes, resulting in defect formation, and compaction of the UF membranes. For the UF membranes, this compaction did prove to be reversible for some but not all of the membrane samples measured. These results showed that in aqueous systems, membranes prepared with PSaMA had interesting responsive behaviors but performed best at neutral and acidic pH values. Moreover, the membranes exhibited excellent stability in the organic solvents IPA and toluene

Description: A simple one-pot approach was developed for the synthesis of furan-2(5H)-one derivative containing indole fragments. This method includes the telescoped multicomponent reaction of indole, 4-methoxyphenylglyoxal, and Meldrum’s acid. The synthetic utility of the prepared furan-2(5H)-one was demonstrated by condensation with 4-methoxybenzaldehyde. The advantages of this method include the employment of readily accessible starting materials, atom economy, process simplicity, and the easy isolation of the target products. The structure of the synthesized furanones was confirmed by 1H and 13C-NMR spectroscopy and high-resolution mass spectrometry with electrospray ionization (ESI-HRMS).

Description: We mainly focus on the effects of small changes of parameters on the dynamics of charged particles around Kerr black holes surrounded by an external magnetic field, which can be considered as a tidal environment. The radial motions of charged particles on the equatorial plane are studied via an effective potential. It is found that the particle energies at the local maxima values of the effective potentials increase with an increase in the black hole spin and the particle angular momenta, but decrease with an increase of one of the inductive charge parameter and magnetic field parameter. The radii of stable circular orbits on the equatorial plane also increase, whereas those of the innermost stable circular orbits decrease. On the other hand, the effects of small variations of the parameters on the orbital regular and chaotic dynamics of charged particles on the non-equatorial plane are traced by means of a time-transformed explicit symplectic integrator, Poincaré sections and fast Lyapunov indicators. It is shown that the dynamics sensitivity depends on small variations in the inductive charge parameter, magnetic field parameter, energy, and angular momentum. Chaos occurs easily as each of the inductive charge parameter, magnetic field parameter, and energy increases but is weakened as the angular momentum increases. When the dragging effects of the spacetime increase, the chaotic properties are not always weakened under some circumstances.

Description: Gut microbiota, a major contributor to human health, is influenced by physical activity and diet, and displays a functional cross-talk with skeletal muscle. Conversely, few data are available on the impact of hypoactivity, although sedentary lifestyles are widespread and associated with negative health and socio-economic impacts. The study aim was to determine the effect of Dry Immersion (DI), a severe hypoactivity model, on the human gut microbiota composition. Stool samples were collected from 14 healthy men before and after 5 days of DI to determine the gut microbiota taxonomic profiles by 16S metagenomic sequencing in strictly controlled dietary conditions. The α and β diversities indices were unchanged. However, the operational taxonomic units associated with the Clostridiales order and the Lachnospiraceae family, belonging to the Firmicutes phylum, were significantly increased after DI. Propionate, a short-chain fatty acid metabolized by skeletal muscle, was significantly reduced in post-DI stool samples. The finding that intestine bacteria are sensitive to hypoactivity raises questions about their impact and role in chronic sedentary lifestyles.

Description: The paper addresses the sustainability of the European Union’s food consumption through a water footprint assessment of selected vulnerable agricultural imports from a two-pronged perspective: (1) the degree of the EU’s dependence on global green water resources embedded in the apparent consumption of selected water-intensive agricultural products and (2) the degree of commitment of countries of origin to sustainability policies. The study argues that the vulnerability of the EU’s agricultural imports to water risks can be estimated based on the amount of green water consumed in producing crops in the countries of origin. The results show that the EU’s consumption of agricultural goods is highly dependent on virtual water imports for all six selected vulnerable agricultural products, from the lowest footprint for bananas (5 mil. km3) to the largest for coffee (69 mil. km3). The analysis also points to a greater concern for quality issues in the countries of origin (56.53%) relative to management (26.52%) and availability issues (16.85%), but the latter are to arise in importance for sustainable production in the years to come. Our conclusions contribute to building up a responsible commitment towards (1) development of environmental policies and the design of practical measures by providing quantitative information that makes problems more clearly defined and tangible, and (2) assessing the outcome of policies and practical measures by understanding their effects on the sustainability of food consumption.

Description: Stand structure and topography are important factors affecting forest vegetation carbon density (FVCD). Revealing the interaction mechanisms between stand structure and topography on FVCD is of great significance for enhancing forest vegetation carbon storage and achieving regional carbon neutrality. Based on stratified sampling, systematic distribution and forest continuous inventory sample plots in Jiangxi province, the variation characteristics of FVCD and its correlations with stand structure and topographic factors were studied. The results are as follows: (1) The average FVCD in Jiangxi province was 44.23 Mg/ha, which was dominated by the carbon density of the arbor layer, accounting for about 81.39% of the total forest—far lower than the average level of global FVCD, which proved that the forest in Jiangxi province was dominated by middle-age and young forests with low carbon density, and also showed that the potential for forest vegetation carbon storage in Jiangxi province was huge. (2) Except for vegetation carbon densities of shrub and herb layers, the vegetation carbon densities of other forest layers in Jiangxi province were significantly different among different forest types. Volume per unit area was the most important factor affecting the vegetation carbon densities of arbor and total forest, and vegetation carbon density–volume models of the main forests were built for vegetation carbon density calculation in Jiangxi province. (3) The vegetation carbon densities of arbor layer, snag and log layer, and total forest increased significantly with increases in elevation and slope. Except for the shrub layer and herb layer, the vegetation carbon densities of the other layers and the total forest had extremely significant or significant differences between slope position gradients—indicating that the effect of topography on FVCD in Jiangxi province was significant, mainly through influencing of forest distribution and human disturbance intensity.

Description: In the past few decades, ZrN thin films have been identified as wear resistant coatings for tribological applications. The mechanical and tribological properties of ZrN thin layers depend on internal stress induced by the adopted deposition techniques and deposition parameters such as pressure, temperature, and growth rate. In sputtering deposition processes, the selected target voltage waveform and the plasma characteristics also play a crucial influence on physical properties of produced coatings. In present work, ZrN thin films, obtained setting different values of duty cycle in a reactive bipolar pulsed dual magnetron sputtering plant, were investigated to evaluate their residual stress through the substrate curvature method. A considerable progressive increase of residual stress values was measured at decreasing duty cycle, attesting the significant role of voltage waveform in stress development. An evident correlation was also highlighted between the values of the duty cycle and those of wear factor. The performed analysis attested an advantageous effect of internal stress, having the samples with high compressive stress, higher wear resistance. A downward trend for wear rate with the increase of internal residual stress was observed. The choice of suitable values of duty cycle allowed to produce ceramic coatings with improved tribological performance.

Description: Klebsiella pneumoniae is an increasing threat to public health and represents one of the most concerning pathogens involved in life-threatening infections. The resistant and virulence determinants are coded by mobile genetic elements which can easily spread between bacteria populations and co-evolve with its genomic host. In this study, we present the full genomic sequences, insertion sites and phylogenetic analysis of 150 prophages found in 40 K. pneumoniae clinical isolates obtained from an outbreak in a Portuguese hospital. All strains harbored at least one prophage and we identified 104 intact prophages (69.3%). The prophage size ranges from 29.7 to 50.6 kbp, coding between 32 and 78 putative genes. The prophage GC content is 51.2%, lower than the average GC content of 57.1% in K. pneumoniae. Complete prophages were classified into three families in the order Caudolovirales: Myoviridae (59.6%), Siphoviridae (38.5%) and Podoviridae (1.9%). In addition, an alignment and phylogenetic analysis revealed nine distinct clusters. Evidence of recombination was detected within the genome of some prophages but, in most cases, proteins involved in viral structure, transcription, replication and regulation (lysogenic/lysis) were maintained. These results support the knowledge that prophages are diverse and widely disseminated in K. pneumoniae genomes, contributing to the evolution of this species and conferring additional phenotypes. Moreover, we identified K. pneumoniae prophages in a set of endolysin genes, which were found to code for proteins with lysozyme activity, cleaving the β-1,4 linkages between N-acetylmuramic acid and N-acetyl-D-glucosamine residues in the peptidoglycan network and thus representing genes with the potential for lysin phage therapy.

Description: Gait and physical fitness are related to cognitive function. A decrease in motor function and physical fitness can serve as an indicator of declining global cognitive function in older adults. This study aims to use machine learning (ML) to identify important features of gait and physical fitness to predict a decline in global cognitive function in older adults. A total of three hundred and six participants aged seventy-five years or older were included in the study, and their gait performance at various speeds and physical fitness were evaluated. Eight ML models were applied to data ranked by the p-value (LP) of linear regression and the importance gain (XI) of XGboost. Five optimal features were selected using elastic net on the LP data for men, and twenty optimal features were selected using support vector machine on the XI data for women. Thus, the important features for predicting a potential decline in global cognitive function in older adults were successfully identified herein. The proposed ML approach could inspire future studies on the early detection and prevention of cognitive function decline in older adults.

Description: As more and more fields utilize deep learning, there is an increasing demand to make suitable training data for each field. The existing interactive object segmentation models can easily make the mask label data because these can accurately segment the area of the target object through user interaction. However, it is difficult to accurately segment the target part in the object using the existing models. We propose a method to increase the accuracy of part segmentation by using the proposed interactive object segmentation model trained only with edge images instead of color images. The results evaluated with the PASCAL VOC Part dataset show that the proposed method can accurately segment the target part compared to the existing interactive object segmentation model and the semantic part-segmentation model.

Description: In the first quarter of 2020, Italy became one of the earliest hotspots of COVID-19 infection, and the government imposed a lockdown. During the lockdown, an online survey of 2053 adults was conducted that asked about health behaviors and about the psychological and overall impact of COVID-19. The present study is a secondary analysis of that data. We hypothesized that self-control, higher socio-economic status, existing health conditions, and fear of infection were all inversely related to actions (or intentions) that violated the lockdown (i.e., infractions). Using partial least squares structural equation modeling (PLS-SEM), we found that only the fear of infection significantly dissuaded people from violating lockdown rules. Since it is not practical or ethical to sow a fear of infection, our study indicates that enacting rules and enforcing them firmly and fairly are important tools for containing the infection. This may become more important as vaccines become more widely available and people lose their fear of infection.

Description: Sowing time, as an element, is important to improving the adaptation of cultivars to environmental conditions and to achieving high seed yields. The field experiment was conducted from 2018–2019 at the Experimental Station of Vytautas Magnus University Agriculture Academy. The experimental design included treatments with different sowing dates: eight sowing dates in 2018 and 10 sowing dates in 2019. The first sowing of spring rapeseed was carried out when the soil reached its physical maturity, i.e., it did not stick to agricultural implements and it crumbled well. The other sowing dates were every seven subsequent days. From 2018–2019, the rapeseed emerged as best in early May (3 and 4 May), and later sowing reduced the emergence of rapeseed. In 2018, most pods were formed on one plant when the rapeseed was sown (on 1 June), compared to other sowings, on average 2.8 times more. In 2019, most pods were formed by the latest-sown rapeseed (7 June), from 1.4 to 2.7 times more compared to previously sown crops. In 2018, the sowing time of spring rapeseed did not have a significant effect on the number of seeds in one pod. In 2019, it was found that the rapeseed formed most of the seeds in the pod at a similar time as in 2018: the sowings of 19 April and 7 June. The average number of seeds in the pod was significantly reduced by early sowing (5 April). In 2019, the highest 1000-seed weight was found at the earliest-sown crop (5 April), which was on average 18.0% higher compared to the later sowings. The 1000-seed weight of the last-sown rapeseed (7 June) was the lowest. In 2018, the yields of early-sown (20 April) spring rapeseed were the highest. Later sowing significantly reduced the yields by 20.7 to 48.2%. In 2019, the highest seed yield was obtained after sowing spring rapeseed in late April (26 April); it was significant, on average, 1.9 times higher than the yields of spring rapeseed sown from 3 May to 7 June. Meteorological conditions had a stronger effect on the field emergence and yield components of spring rapeseed than the sowing date.

Description: To explore the effects of thermal actions on the pore structural features of granite, scanning electron microscope (SEM) and mercury injection experiments were carried out on granite after thermal treatment (25 °C to 400 °C). The pore structure was investigated from various perspectives, including the capillary pressure curve, the pore–throat ratio, the median saturation pressure, the median pore–throat radius, the porosity, the pore volume, and the pore size distribution. Based on mercury intrusion test data, the Winland model of permeability prediction was modified for a high-temperature tight granite reservoir. The results showed that: (1) As the temperature rose, the mercury injection curve was gradually flattened, and the mercury ejection efficiency gradually increased. Meanwhile, the pore–throat ratio and the median saturation pressure decreased exponentially, and the pore connectivity was enhanced. (2) The median pore–throat radius and the porosity of granite increased exponentially as the temperature increased. Above 200 °C, the median pore–throat radius and the porosity increased substantially. (3) The pore volumes of the transitional pores, mesopores and macropores, and the total pore volume inside the granite, increased as the temperature rose. Especially above 200 °C, the transitional pores and the mesopores were prominently developed, and the pore volumes of the transitional pores and the mesopores took up a significantly greater proportion of the total pore volume. (4) As the temperature rose, the pore size distribution of granite became more extensive, the pore–throat structure was obviously developed, and the pore–throat connectivity was enhanced. (5) The relationship between the micropores’ characteristic parameters and the macro-permeability in engineering was established though a modified Winland model, and the modified Winland model had a better prediction effect. The findings provide a solid basis for rock geothermal mining projects and related geotechnical engineering.

Description: The restoration of paintings always involves the removal of darkened superficial layers, which are mainly due to dust deposition and aged varnishes. As cleaning is an irreversible and invasive treatment, physical methods (i.e., laser cleaning) instead of chemical ones are frequently suggested to reduce side effects on pictorial layers. Among the most employed laser systems, the free-running Er:YAG laser is considered very suitable for fine arts cleaning. This laser works at 2.94 μm, at which only –OH and –NH bonds in molecules are excited. This character can become a disadvantage when pigments with these functional groups are present. To understand the potential of the Er:YAG laser in such situations or in the presence of degradable pigments, the effectiveness of varnish removal from paintings prepared with egg yolk as the binder and cinnabar and lead white as the pigments were systematically investigated. Different cleaning conditions were used, and a hyperspectral sensor was innovatively used as a rapid, in situ and non-destructive technique to assess the effects of laser ablation, besides microscopic analysis. Though results obtained show all these pigments are sensitive to this laser radiation, satisfactory cleaning can be achieved without damaging the pictorial layer. The best cleaning conditions were 0.5 W of power (50 mJ and 10 Hz for energy and frequency), with 2-propanol as the wetting agent.

Description: Chlorine-containing volatile organic compounds (CVOCs) present in industrial exhaust gas can cause great harm to the human body and the environment. In order to further study the catalytic oxidation of CVOCs, an active site regulated RuOx/Sn0.2Ti0.8O2 catalyst with different Ru precursors was developed. With Dichloromethane as the model molecule, the activity test results showed that the optimization of Ru precursor using Ru colloid significantly increased the activity of the catalyst (T90 was reduced by about 90 °C when the Ru loading was 1 wt%). The analysis of characterization results showed that the improvement of the catalytic performance was mainly due to the improvement of the active species dispersion (the size of Ru cluster was reduced from 3–4 nm to about 1.3 nm) and the enhancement of the interaction between the active species and the support. The utilization efficiency of the active components was improved by nearly doubling TOF value, and the overall oxidation performance of the catalyst was also enhanced. The relationship between the Ru loading and the catalytic activity of the catalyst was also studied to better determine the optimal Ru loading. It could be found that with the increase in Ru loading, the dispersibility of RuOx species on the catalyst surface gradually decreased, despite the increase in their total amount. The combined influence of these two effects led to little change in the catalytic activity of the catalyst at first, and then a significant increase. Therefore, this research is meaningful for the efficient treatment of CVOCs and further reducing the content of active components in the catalysts.

Description: Monitoring gait patterns in daily life will provide a lot of biological information related to human health. At present, common gait pressure analysis systems, such as pressure platforms and in-shoe systems, adopt rigid sensors and are wired and uncomfortable. In this paper, a biomimetic porous graphene–SBR (styrene-butadiene rubber) pressure sensor (PGSPS) with high flexibility, sensitivity (1.05 kPa−1), and a wide measuring range (0–150 kPa) is designed and integrated into an insole system to collect, process, transmit, and display plantar pressure data for gait analysis in real-time via a smartphone. The system consists of 16 PGSPSs that were used to analyze different gait signals, including walking, running, and jumping, to verify its daily application range. After comparing the test results with a high-precision digital multimeter, the system is proven to be more portable and suitable for daily use, and the accuracy of the waveform meets the judgment requirements. The system can play an important role in monitoring the safety of the elderly, which is very helpful in today’s society with an increasingly aging population. Furthermore, an intelligent gait diagnosis algorithm can be added to realize a smart gait monitoring system.

Description: Voids in polymer matrix composites are one of the most common manufacturing defects, which may influence the mechanical properties and structural behavior of the final parts made of composites by various manufacturing methods. Therefore, numerous non-destructive testing (NDT) techniques were developed and applied for quality control and in-service testing of such structures. In this paper, the authors analyzed various alternatives to the reference technique, X-ray computed tomography (XCT) NDT, which is used for industrial testing of composite disks having defects in the form of the lower density areas. Different candidates, namely: vibration-based testing, infrared thermography, vibro-thermography, as well as ultrasonic testing were analyzed in terms of their sensitivity and technical feasibility. The quality of the results, the complexity of the testing procedure, time and labor consumption, and the cost of the equipment were analyzed and compared with the reference technique. Based on the conducted research the authors finally proposed a hybrid approach to quality control, using a combination of two NDT techniques–infrared thermography (for initial scanning and detection of near-surface defects) and ultrasonic testing (for a more detailed analysis of products that pass the first testing procedure). It allowed for replacing the costly XCT diagnostics with a much cheaper, but almost equally effective, alternative.

Description: The research presented in this paper examines the experiences of Poles traveling for leisure purposes in the summer season of 2020, taking into account the context of the COVID-19 pandemic. The study involved the analysis of source data, including statistical data, and a survey administered via the computer-assisted web interviewing (CAWI) method. The survey questionnaire was created on the Google platform. The link to the questionnaire was provided via social media to participants of travel groups in the period from 30 November 2020 to 15 February 2021. The sampling was purposive (included only travelers) despite efforts to maintain the gender balance; the proportion of women was higher. Therefore, caution must be applied when interpreting the results which may not be transferable. The survey included questions regarding the respondents’ travel behavior and risk perceptions. 433 correctly completed questionnaires were collected. The dataset was analyzed quantitatively and qualitatively. Descriptive statistics measures and correlation coefficients were used in the analysis of the results. The study shows that some respondents decided against traveling because of the pandemic situation, while those who decided to travel adjusted their behavior by avoiding crowded places and resigning from traveling abroad. Compliance with hygiene standards in the area of tourism services varied, and was the highest in the case of accommodation services. Women rated hygiene standards in chain cafes statistically higher than men and younger people rated hygiene on public transport, trains, air transport and in fast food services higher than older people. The higher the tourism expenditure, the lower the assessment of sanitary standards in tour guide services, air transport and chain cafes decreased.

Description: Dynamic behavior modeling and parameter optimization of the spray boom based on multi-body vibration were developed to study the influence of the boom sprayer’s motion in a complex working environment on the dynamic behavior of the spray boom. First, a geometric continuous model of spray boom vibration was established considering the influence of the boom sprayer body and boom suspension. Then, the dynamic behavior of the spray boom under step excitation was studied on a SWAN3WP-500 self-propelled boom spray experimental platform. The time-domain response of spray boom movement was characterized using a multi-channel dynamic test system, and the simulation results of the geometric continuous model were verified. The correlation coefficient between the simulated and experimental results is 0.917, and the maximum relative error is 12.16%. Finally, the effects of boom sprayer speed, spray boom length, and spray boom cross-section shape on spray boom vibration were analyzed through the geometric continuous model. (1) The amplitude and period of vibration at the extremity of the spray boom gradually decline with a rise in boom sprayer speed. (2) The amplitude and period of vibration at the extremity of the spray boom gradually increase when the unilateral spray boom is shorter than 5 m but slowly decrease when it is longer than 5 m. To avoid excessive static elastic deformation of the spray boom, the length of the unilateral spray boom should be controlled within 6 m. (3) A reasonable cross-sectional shape can improve the spray boom vibration, and the spray boom with a type B cross-section can better inhibit the vertical vibration of the spray boom under the same cross-sectional area.

Description: Food processing systematically aims at meeting the needs of consumers who are looking for total high quality and perfect food safety. As the various thermal and non-thermal food preservation technologies often affect the natural properties in terms of sensation, flavor, texture, etc., instant controlled pressure drop (DIC) has been conceived as a relevant, innovative process in this field. DIC uses high saturated steam pressure and short duration to provide a new way to expand biological matrices, improve drying, decontaminate, and extract biologically active compounds, among other attributes. Therefore, this review focuses on describing the applications of DIC technology on a wide range of products such as foods and by-products that have been processed both in the laboratory and on an industrial scale. The application of DIC has shown the possibility of a significant leap in quality improvement and cost reduction in the food industry. DIC reduces the drying time of fruits and vegetables, and improves the extraction of essential oils, vegetable oils, and antioxidant components. It also provides strong decontamination, eliminates vegetative microorganisms and spores, and reduces non-nutritional and allergenic components. Over the past 33 years, this technology has continued to expand its food applications and improve its characteristics on an industrial scale. But there are still many food unit operations that can be taken to the next level with DIC.

Description: This paper analyses the construction time and advance rate of a 3 km long drill and blast tunnel under various geological conditions using an upgraded NTNU drill and blast prediction model. The analysis was carried out for the five types of Korean tunnel supports according to the rock mass quality (from Type 1, meaning a very good rock mass quality; to Type 5, meaning a very poor rock mass quality). Four kinds of rock properties, as well as the rock mass quality, for each tunnel support type were applied to simulate different geological conditions based on previous studies and the NTNU model. The construction time was classified into five categories: basic, standard, gross, tunnel and total, according to the operation characteristics to more effectively analyse the time. In addition, to consider the actual geological conditions in tunnelling, the construction times for the three mixed geological cases were analysed. It was found that total construction time of a tunnel covering all the operations and site preparations with a very poor rock mass quality was more than twice that of a tunnel with a very good rock mass quality for the same tunnel length. It is thought that this study can be a useful approach to estimating the construction time and advance rate in the planning or design stage of a drill and blast tunnel.

Description: This study aimed to investigate the effects of multi-bacteria solid-state fermented diets with different crude fiber (CF) levels on growth performance, nutrient digestibility, and microbial flora of finishing pigs. The multi-bacteria solid-state fermented diets were made up of Lactobacillus amylovorus, Enterococcus faecalis, Bacillus subtilis, and Candida utilis. According to a 2 (factors) × 2 (levels) design, with the two factors being multi-bacteria solid-state fermentation (fed non-fermented diet or multi-bacteria fermentation) or CF levels (fed a basal diet containing 2.52% CF or 7.00% CF), a total of 36 finishing pigs (70.80 ± 5.75 kg) were divided into 4 treatments with 9 barrows per group: (1) pigs fed a diet containing 7.00% CF (HF), (2) pigs fed a multi-bacteria fermentation diet containing 7.00% CF (HFM), (3) pigs fed a diet containing 2.52% CF (LF), and (4) piglets fed a multi-bacteria fermentation diet containing 2.52% CF (LFM). This experiment lasted 28 days. The multi-bacteria solid-state fermented diet increased the backfat thickness (p 〈 0.05) and apparent total tract nutrient digestibility (ATTD) of CF, neutral detergent fiber (NDF), acid detergent fiber (ADF), crude protein (CP), 8 amino acids (Trp, Asp, Gly, Cys, Val, Met, Ile, and Leu), total essential amino acids (EAA), total non-essential amino acids (NEEA), and total amino acids (TAA) (p 〈 0.05). Multi-bacteria solid-state fermented diet increased serum concentrations of HDL-c, ABL, TP, and GLU, the serum enzyme activities of GSH-Px, T-AOC, SOD, and CAT (p 〈 0.05), the relative abundance of Lactobacillus, Oscillospira, and Coprococcus (p 〈 0.05), and the abundance of YAMINSYN3-PWY, PWY-7013, GOLPDLCAT-PWY, ARGORNPROST-PWY, and PWY-5022 pathways (p 〈 0.05). The multi-bacteria solid-state fermented diet reduced the digestion amount of CF, NDF, and ADF (p 〈 0.05), the serum concentrations of TC, TG, LDL-c, BUN, and MDA (p 〈 0.05), the relative abundance of Streptococcaceae (p 〈 0.05), and the abundance of PWY-6470, PWY0-862, HSERMETANA-PWY, LACTOSECAT-PWY, MET-SAM-PWY, PWY-6700, PWY-5347, PWY0-1061, and LACTOSECAT-PWY pathways (p 〈 0.05). The high-fiber diet increased average daily feed intake (p 〈 0.05), the serum concentrations of TC, TG, LDL-c, BUN, and MDA (p 〈 0.05), the relative abundance of Clostridiaceae_Clostridium and Coprococcus (p 〈 0.05), and the abundance of TCA-GLYOX-BYPASS, GLYCOLYSIS-TCA-GLYOX-BYPASS, and PWY-6906 pathways (p 〈 0.05). The high-fiber diet reduced chest circumference (p 〈 0.05) and ATTD of ether extract (EE), CF, NDF, ADF, Ca, CP, 18 amino acids (Trp, Thr, Val, Met, Ile, Leu, Phe, Lys, His, Arg Asp, Ser, Glu, Gly, Ala, Cys, Tyr, and Pro), EAA, NEAA, and TAA (p 〈 0.05). The high-fiber diet also reduced the serum concentrations of HDL-c, TP, ABL, and GLU, the serum enzyme activities of T-AOC, GSH-Px, SOD, and CAT (p 〈 0.05), and the relative abundance of Akkermansia and Oscillospira (p 〈 0.05). There was no significant effect of the interaction between multi-bacteria fermentation and dietary CF levels, except on the digestion amount of CF (p 〈 0.05). The 7.00% CF had a negative effect on the digestion of nutrients, but multi-bacteria solid-state fermentation diets could relieve this negative effect and increase backfat thickness. High-fiber diets and multi-bacteria solid-state fermentation improved the diversity and abundance of fecal microorganisms in finishing pigs.

Description: In this paper, a hybrid bat optimization algorithm based on variable neighbourhood structure and two learning strategies is proposed to solve a three-stage distributed assembly permutation flowshop scheduling problem to minimize the makespan. The algorithm is firstly designed to increase the population diversity by classifying the populations, which solves the difficult trade-off between convergence and diversity of the bat algorithm. Secondly, a selection mechanism is used to update the bat’s velocity and location, solving the difficulty of the algorithm to trade-off exploration and mining capacity. Finally, the Gaussian learning strategy and elite learning strategy assist the whole population to jump out of the local optimal frontier. The simulation results demonstrate that the algorithm proposed in this paper can well solve the DAPFSP. In addition, compared with other metaheuristic algorithms, IHBA has better performance and gives full play to its advantage of finding optimal solutions.

Description: Cadmium (Cd) is one of the most injurious heavy metals, affecting plant growth and development. Melatonin (N-acetyl-5-methoxytryptamine) was discovered in plants in 1995, and it is since known to act as a multifunctional molecule to alleviate abiotic and biotic stresses, especially Cd stress. Endogenously triggered or exogenously applied melatonin re-establishes the redox homeostasis by the improvement of the antioxidant defense system. It can also affect the Cd transportation and sequestration by regulating the transcripts of genes related to the major metal transport system, as well as the increase in glutathione (GSH) and phytochelatins (PCs). Melatonin activates several downstream signals, such as nitric oxide (NO), hydrogen peroxide (H2O2), and salicylic acid (SA), which are required for plant Cd tolerance. Similar to the physiological functions of NO, hydrogen sulfide (H2S) is also involved in the abiotic stress-related processes in plants. Moreover, exogenous melatonin induces H2S generation in plants under salinity or heat stress. However, the involvement of H2S action in melatonin-induced Cd tolerance is still largely unknown. In this review, we summarize the progresses in various physiological and molecular mechanisms regulated by melatonin in plants under Cd stress. The complex interactions between melatonin and H2S in acquisition of Cd stress tolerance are also discussed.

Description: In this paper, we develop an economic order quantity (EOQ) model for fixed shelf-life items and a non-increasing demand. The objective of this model is to maximize the total profit. We find the criterion to decide (i) the interior maximum solution or (ii) the boundary maximum solution. Eight numerical examples are given to illustrate all possible scenarios of this generalized model. Our results identify a scenario for which the maximum profit is always negative. This is highly relevant for firms in the public sector operating at a financial loss.

Description: Textile-reinforced mortar (TRM) is a strengthening material in which textiles are attached to reinforced concrete (RC) structures using an inorganic matrix. Although many studies on structural behavior, various factors that affect TRM behavior could not be determined clearly. Especially, the uncertainty in bonds due to inorganic materials was not considered. In this study, the flexural behavior of TRM-strengthened beams was determined considering intermediate crack debonding occurred. The TRM beam strengthening limit and TRM coefficients were defined considering the possibility of premature failure and experimental results of four other research on 22 specimens. Therefore, it is expected that a conservative design would be possible when the suggested strengthening limit coefficient is applied.

Description: Climate change is expected to lead to changes to the amount, frequency, intensity, and timing of precipitation and subsequent water supply and its availability to plants in mountain regions worldwide. This is likely to affect plant growth and physiological performance, with subsequent effects to the functioning of many important high-elevation ecosystems. We conducted a quantitative systematic review and meta-analysis of the effects of altered water supply on plants from high elevation ecosystems. We found a clear negative response of plants to decreases in water supply (mean Hedges’ g = −0.75, 95% confidence intervals: −1.09 to −0.41), and a neutral response to increases in water supply (mean Hedges’ g = 0.10, 95% confidence intervals: 0.43 to 0.62). Responses to decreases in water supply appear to be related to the magnitude of change in water supply, plant growth form, and to the measured response attribute. Changes to precipitation and water supply are likely to have important consequences for plant growth in high elevation ecosystems, with vegetation change more likely be triggered by reductions than increases in growing season precipitation. High elevation ecosystems that experience future reductions in growing-season precipitation are likely to exhibit plant responses such as reduced growth and higher allocation of carbohydrates to roots.

Description: For the sound field reconstruction of large conical surfaces, current statistical optimal near-field acoustic holography (SONAH) methods have relatively poor applicability and low accuracy. To overcome this problem, conical SONAH based on cylindrical SONAH is proposed in this paper. Firstly, elementary cylindrical waves are transformed into those suitable for the radiated sound field of the conical surface through cylinder-cone coordinates transformation, which forms the matrix of characteristic elementary waves in the conical spatial domain. Secondly, the sound pressure is expressed as the superposition of those characteristic elementary waves, and the superposition coefficients are solved according to the principle of superposition of wave field. Finally, the reconstructed conical pressure is expressed as a linear superposition of the holographic conical pressure. Furthermore, to overcome ill-posed problems, a regularization method combining truncated singular value decomposition (TSVD) and Tikhonov regularization is proposed. Large singular values before the truncation point of TSVD are not processed and remaining small singular values representing high-frequency noise are modified by Tikhonov regularization. Numerical and experimental case studies are carried out to validate the effectiveness of the proposed conical SONAH and the combined regularization method, which can provide reliable evidence for noise monitoring and control of mechanical systems.

Description: Lane and road marker segmentation is crucial in autonomous driving, and many related methods have been proposed in this field. However, most of them are based on single-frame prediction, which causes unstable results between frames. Some semantic multi-frame segmentation methods produce error accumulation and are not fast enough. Therefore, we propose a deep learning algorithm that takes into account the continuity information of adjacent image frames, including image sequence processing and an end-to-end trainable multi-input single-output network to jointly process the segmentation of lanes and road markers. In order to emphasize the location of the target with high probability in the adjacent frames and to refine the segmentation result of the current frame, we explicitly consider the time consistency between frames, expand the segmentation region of the previous frame, and use the optical flow of the adjacent frames to reverse the past prediction, then use it as an additional input of the network in training and reasoning, thereby improving the network’s attention to the target area of the past frame. We segmented lanes and road markers on the Baidu Apolloscape lanemark segmentation dataset and CULane dataset, and present benchmarks for different networks. The experimental results show that this method accelerates the segmentation speed of video lanes and road markers by 2.5 times, increases accuracy by 1.4%, and reduces temporal consistency by only 2.2% at most.

Description: Carbon neutrality has positive impacts on people, nature and the economy, and buildings represent the “last mile” sector in the transition to carbon neutrality. Carbon neutrality is characterized by the decarbonization of operations and maintenance, in addition to zero emissions in electricity and other industry sectors. Taking China’s commercial buildings as an example, this study is the first to perform an extensive data analysis for a step-wise carbon neutral roadmap of building operations via the analysis of a dynamic emission scenario. The results reveal that the carbon emissions abatement of commercial building operations from 2001 to 2018 was 1460.85 (±574.61) mega-tons of carbon dioxide (Mt CO2). The carbon emissions of commercial building operations will peak in the year 2039 (±5) at 1364.31 (±258.70) Mt, with emission factors and energy intensity being the main factors influencing the carbon peak. To move toward carbon neutral status, an additional 169.73 Mt CO2 needs to be cut by 2060, and the low emission path toward carbon neutrality will lead to the realization of the carbon peak of commercial buildings in 2024, with total emissions of 921.71 Mt. It is believed that cutting emissions from the operation of buildings in China will require a multi-sectoral synergistic strategy. It is suggested that government, residents, enterprises, and other stakeholders must better appreciate the challenges to achieve a substantial carbon reduction and the need for urgent action in the building sector in order to achieve carbon neutrality.

Description: Mycotoxins are toxic secondary metabolites produced by fungi on agricultural produce. Mycotoxins can be cytotoxic, genotoxic, mutagenic, and teratogenic, and they are persistent threats to human and animal health. Consumption of mycotoxin-contaminated maize can cause cancer and even sudden death. Health hazards can also occur from consuming products from animals fed with mycotoxin-contaminated feed or forage. The main mode of spread of mycotoxigenic fungi is through air-borne spores originating from soil or plant debris, although some fungi can also spread through infected seed-to-seedling transmission, ultimately followed by contamination of the harvestable product. This perspective assesses opportunities to prevent mycotoxigenic fungal infection in maize seeds produced for sowing as an important starting point of crop contamination. A case study of Nigeria showed infection in all tested farmer-produced, seed company, and foundation seed samples. A schematic overview of the formal and informal seed systems is presented to analyze their contribution to fungal infection and mycotoxin contamination in the maize value chain, as well as to set criteria for successful control. We recommend an integrated approach to control mycotoxigenic fungal infection, including resistant varieties and other control methods during seed production, grain production, and grain storage, with an important role in maintaining seed health.

Description: The cross-flow rotating packed bed (RPB) has attracted wide attention in recent years because of its advantages of large gas capacity, low pressure drop and lack of flooding limitation. However, the complex structure of the packing makes it difficult to obtain the gas flow characteristics in the cross-flow RPB by experiments. In this study, the dry pressure drop in the cross-flow RPB was investigated by computational fluid dynamics (CFD). The packing was modeled by the porous media model and the rotation of the packing was simulated by the sliding mesh model. The simulation results obtained by three turbulence models were compared with experimental results, and the RNG k-ε model was found to best describe the turbulence behaviors in the cross-flow RPB. Then, the effects of gas flow rate and rotating speed on dry pressure drop in different parts of the cross-flow RPB were analyzed. The results of this study can provide important insights into the design and scale-up of cross-flow RPB.

Description: We consider alternative possibilities for hedging spot positions on the FTSE LATIBEX Index, the index of the only international market exclusively for Latin American firms that is denominated by the euro. Since there is not a futures market on the index, it is unclear whether a relatively successful hedge can be found. We explore the plausibility of employing futures on four stock market indices: EUROSTOXX 50, S&P500, BOVESPA, and IPC, and simulate the results that could be obtained by a hedge position based on either unconditional or conditional second order moments estimated from different asymmetric GARCH models. Several criteria for hedging effectiveness suggest that futures contracts on BOVESPA should be preferred, and that a salient reduction in risk can be achieved over the unhedged LATIBEX portfolio. The evidence in favor of a better performance of conditional moments is very clear, without significant differences among the alternative GARCH specifications.

Description: In Europe, the qualification of injection anchors in masonry under static and quasi-static actions is based on an assessment of tests performed in undamaged masonry. Nevertheless, in seismic prone countries like Italy the influences deriving from earthquake actions cannot be disregarded. Masonry elements are very sensitive to cyclic/seismic action and research on the behavior of anchors in damaged masonry is rather limited. The paper presents the results of an experimental campaign aimed at evaluating the residual tensile strength of adhesive anchors installed into undamaged walls that were subsequently subjected to cyclic in-plane loading to simulate seismic actions before. Consequently, the anchors experienced different stresses depending on their location within the walls. Overall, 29 tests were performed with anchors placed both, in undamaged and damaged areas. The results showed that there is a correlation between residual tensile strength and masonry initial conditions, and therefore the installation of anchors in masonry elements should be carefully planned avoiding areas that could be heavily damaged during seismic events or considering redundant connections in critical areas. In particular, it seems that the width of the crack (created by cyclic actions) that passes nearby/into the anchor borehole is the main parameter that affects the ultimate resistance of the anchors.

Description: An approximate model based on friction-coefficient formalism is developed to predict the mixed-gas permeability and selectivity of polymeric membranes. More specifically, the model is a modification of Kedem’s approach to flux coupling. The crucial assumption of the developed model is the division of the inverse local permeability of the mixture component into two terms: the inverse local permeability of the corresponding pure gas and the term proportional to the friction between penetrants. Analytical expressions for permeability and selectivity of polymeric membranes in mixed-gas conditions were obtained within the model. The input parameters for the model are ideal selectivity and solubility coefficients for pure gases. Calculations have shown that, depending on the input parameters and the value of the membrane Peclét number (the measure of coupling), there can be both a reduction and an enhancement of selectivity compared to the ideal selectivity. The deviation between real and ideal selectivity increases at higher Peclét numbers; in the limit of large Peclét numbers, the mixed-gas selectivity tends to the value of the ideal solubility selectivity. The model has been validated using literature data on mixed-gas separation of n-butane/methane and propylene/propane through polymeric membranes.

Description: This paper explores the use of calcareous tuberculosis as an adsorbent and heavy-metal ions (Cu2+, Zn2+, Cd2+, and Pb2+) as adsorbates, and the influence of varying levels of particle size, adsorption time, pH, adsorbent dosage, and initial concentration of heavy metals is studied through an experiment of single heavy-metal adsorption. In addition, the impact of the temperature and other factors on the adsorption of heavy-metal ions by calcareous nodules is analyzed to identify the optimal conditions for the adsorption of heavy-metal ions by calcareous nodules. As shown by the research findings, the adsorption rates of Cu2+, Zn2+, and Pb2+ gradually declined with the increase in particle size, with no evident effect on Cd2+. In the meantime, with further increases in factors such as the adsorption time, adsorbent dosage, and temperature, the adsorption rates of Cu2+, Zn2+, Cd2+, and Pb2+ experienced gradual increases. The adsorption rates of Cu2+, Zn2+, and Cd2+ gradually declined with the increase in initial concentration of heavy-metal ions, whereas the adsorption rate of Pb2+ experience increased first and then declined. As the pH increased, the adsorption rate of Cd2+ experience increased first and then declined at a slow pace. The adsorption rates of Cu2+, Zn2+, and Pb2+ increased first and then decreased. The adsorption capacity of calcareous nodules toward the four heavy-metal ions was in the order of Pb2+ 〉 Zn2+ 〉 Cu2+ 〉 Cd2+. When the particle size was set to 0.25 mm, the adsorption time was set to 120 min, and the dosage was set to 0.6 g, the calcareous nodules included Pb2+, Zn2+, and Cu2+. Moreover, Cd2+ was able to achieve stronger adsorption capacity, with the adsorption rate able to reach 83.33%, 77.78%, 73.81%, and 81.93% of its maximum level. Therefore, as the particle size of the heavy-metal ions decreased, the adsorption capacity generally became stronger. As the adsorption time increased, the temperature and the amount of adsorbent also increased. The optimal pH value for the adsorption of calcareous nodules toward Pb2+, Zn2+, Cu2+, and Cd2+ was found to be 7, 6, 5, and 8, respectively, and the optimal temperature was 50 °C. In summary, calcareous nodules are a natural, low-cost, and effective adsorbent.

Description: To respond to global climate change and achieve a “carbon peak” and “carbon neutrality” as soon as possible has become a common goal around the world. Economic growth relies heavily on financial development; indeed, low-carbon economic development is inseparable from financial support. This paper studies the impact of financial development on carbon emission intensity and its mechanism from both theoretical and empirical aspects. Based on the 2005–2018 data on Chinese cities and the Spatial Durbin Model (SDM) research results, this paper finds that: (1) Financial development has significantly reduced China’s carbon emission intensity overall. After considering spatial effects, financial development increases local carbon emission intensity, although it may lead to a more significant decrease in the surrounding area. (2) The analysis of heterogeneity shows that only the financial development in the eastern region has a substantial detrimental impact on total carbon emission intensity and the carbon emission intensity of neighboring cities. The financial development in the central and western regions has no significant effect on carbon emission intensity. (3) The mechanism test shows that financial development mainly reduces carbon emission intensity through technological innovation and structural optimization, with the effect of technological innovation being 9.5%, and the effect of structural optimization being 12.15%. The expansion of the consumption effects of financial development has no significant impact on carbon emission intensity. Accordingly, this article believes that it is necessary to further support financial development, build large-scale financial centers, continue to optimize the structure of financial products, and encourage the development of green finance.

Description: Despite a keen interest in clinical research, most paramedical professionals are unwilling to play an active role. Our objective was to explore paramedical professionals’ representations of research. Using an existing database of final year paramedical students (speech therapy, occupational therapy, psychomotricity, audiometry, physiotherapy, orthoptics), we deployed a qualitative approach composed of two successive steps: (1) a free word association task, and (2) semi-structured individual interviews. Out of the 54 students who agreed to be contacted, we received 21 responses to the free word association questionnaire, and 11 interviews were conducted. The hierarchical evocation matrix revealed that the scientific representation of research is based on words defining the research and the purpose of the research. “Collaboration” was identified as being an essential part of the research process. The central core of the representation is coherent with all its components perceived as positive. The content analysis of the interviews showed a polarization around two key points: (1) participants are interested in accessing and using evidence in their practice (2) but feel less confident about and/or motivated to generate evidence themselves. This study highlights the need to develop more research-friendly environments, especially in training institutions.

Description: Monitoring physical activity in medical and clinical rehabilitation, in sports environments or as a wellness indicator is helpful to measure, analyze and evaluate physiological parameters involving the correct subject’s movements. Thanks to integrated circuit (IC) technologies, wearable sensors and portable devices have expanded rapidly in monitoring physical activities in sports and tele-rehabilitation. Therefore, sensors and signal acquisition devices became essential in the tele-rehabilitation path to obtain accurate and reliable information by analyzing the acquired physiological signals. In this context, this paper provides a state-of-the-art review of the recent advances in electroencephalogram (EEG), electrocardiogram (ECG) and electromyogram (EMG) signal monitoring systems and sensors that are relevant to the field of tele-rehabilitation and health monitoring. Mostly, we focused our contribution in EMG signals to highlight its importance in rehabilitation context applications. This review focuses on analyzing the implementation of sensors and biomedical applications both in literature than in commerce. Moreover, a final review discussion about the analyzed solutions is also reported at the end of this paper to highlight the advantages of physiological monitoring systems in rehabilitation and individuate future advancements in this direction. The main contributions of this paper are (i) the presentation of interesting works in the biomedical area, mainly focusing on sensors and systems for physical rehabilitation and health monitoring between 2016 and up-to-date, and (ii) the indication of the main types of commercial sensors currently being used for biomedical applications.

Description: Intermolecular interactions in aqueous solutions are crucial for virtually all processes in living cells. ATR-FTIR spectroscopy is a technique that allows changes caused by many types of such interactions to be registered; however, binary solutions are sometimes difficult to solve in these terms, while ternary solutions are even more difficult. Here, we present a method of data pretreatment that facilitates the use of the Parallel Factor Analysis (PARAFAC) decomposition of ternary solution spectra into parts that are easier to analyze. Systems of the NMA–water–osmolyte-type were used to test the method and to elucidate information on the interactions between N-Methylacetamide (NMA, a simple peptide model) with stabilizing (trimethylamine N-oxide, glycine, glycine betaine) and destabilizing osmolytes (n-butylurea and tetramethylurea). Systems that contain stabilizers change their vibrational structure to a lesser extent than those with denaturants. Changes in the latter are strong and can be related to the formation of direct NMA–destabilizer interactions.

Description: Individual identification plays an important part in disease prevention and control, traceability of meat products, and improvement of agricultural false insurance claims. Automatic and accurate detection of cattle face is prior to individual identification and facial expression recognition based on image analysis technology. This paper evaluated the possibility of the cutting-edge object detection algorithm, RetinaNet, performing multi-view cattle face detection in housing farms with fluctuating illumination, overlapping, and occlusion. Seven different pretrained CNN models (ResNet 50, ResNet 101, ResNet 152, VGG 16, VGG 19, Densenet 121 and Densenet 169) were fine-tuned by transfer learning and re-trained on the dataset in the paper. Experimental results showed that RetinaNet incorporating the ResNet 50 was superior in accuracy and speed through performance evaluation, which yielded an average precision score of 99.8% and an average processing time of 0.0438 s per image. Compared with the typical competing algorithms, the proposed method was preferable for cattle face detection, especially in particularly challenging scenarios. This research work demonstrated the potential of artificial intelligence towards the incorporation of computer vision systems for individual identification and other animal welfare improvements.

Description: The exploration and rational design of easily separable and highly efficient sorbents with satisfactory capability of extracting radioactive uranium (U)-containing compound(s) are of paramount significance. In this study, a novel magnetic hydroxyapatite (HAP) composite (HAP@ CoFe2O4), which was coupled with cobalt ferrite (CoFe2O4), was rationally designed for uranium(VI) removal through a facile hydrothermal process. The U(VI) ions were rapidly removed using HAP@ CoFe2O4 within a short time (i.e., 10 min), and a maximum U(VI) removal efficiency of 93.7% was achieved. The maximum adsorption capacity (Qmax) of the HAP@CoFe2O4 was 338 mg/g, which demonstrated the potential of as-prepared HAP@CoFe2O4 in the purification of U(VI) ions from nuclear effluents. Autunite [Ca(UO2)2(PO4)2(H2O)6] was the main crystalline phase to retain uranium, wherein U(VI) was effectively extracted and immobilized in terms of a relatively stable mineral. Furthermore, the reacted HAP@CoFe2O4 can be magnetically recycled. The results of this study reveal that the suggested process using HAP@CoFe2O4 is a promising approach for the removal and immobilization of U(VI) released from nuclear effluents.

Description: We report that polymerization makes a robust, practically applicable multifunctional optical device with a continuous wavelength tunable over 500 nm spectral range using UV-polymerizable cholesteric liquid crystals (CLCs). It can be used as a circular polarizer generating an extremely high degree of circularly polarized light with |g| = 1.85~2.00. It can also be used for optical notch filters, bandwidth-variable (from ~28 nm to ~93 nm) bandpass filters, mirrors, and intensity-variable beam splitters. Furthermore, this CLC device shows excellent stability owing to the polymerization of CLC cells. Its performance remains constant for a long time (~2 years) after a high-temperature exposure (170 °C for 1 h) and an extremely high laser beam intensity exposure (~143 W/cm2 of CW 532 nm diode laser and ~2.98 MW/cm2 of Nd: YAG pulse laser operation for two hours, respectively). The optical properties of polymerized CLC were theoretically analyzed by Berreman’s 4 × 4 matrix method. The characteristics of this device were significantly improved by introducing an anti-reflection layer on the device. This wavelength-tunable and multifunctional device could dramatically increase optical research efficiency in various spectroscopic works. It could be applied to many instruments using visible and near-infrared wavelengths.

Description: Although remote sensors have been increasingly providing dense data and deriving reanalysis data for inversion of particulate matters, the use of these data is considerably limited by the ground monitoring samples and conventional machine learning models. As regional criteria air pollutants, particulate matters present a strong spatial correlation of long range. Conventional machine learning cannot or can only model such spatial pattern in a limited way. Here, we propose a method of a geographic graph hybrid network to encode a spatial neighborhood feature to make robust estimation of coarse and fine particulate matters (PM10 and PM2.5). Based on Tobler’s First Law of Geography and graph convolutions, we constructed the architecture of a geographic graph hybrid network, in which full residual deep layers were connected with graph convolutions to reduce over-smoothing, subject to the PM10–PM2.5 relationship constraint. In the site-based independent test in mainland China (2015–2018), our method achieved much better generalization than typical state-of-the-art methods (improvement in R2: 8–78%, decrease in RMSE: 14–48%). This study shows that the proposed method can encode the neighborhood information and can make an important contribution to improvement in generalization and extrapolation of geo-features with strong spatial correlation, such as PM2.5 and PM10.

Description: Surface modification of membranes is an effective approach for imparting unique characteristics and additional functionalities to the membranes. Chemical grafting is a commonly used membrane modification technique due to its versatility in tailoring and optimizing the membrane surface with desired functionalities. Various types of polymers can be precisely grafted onto the membrane surface and the operating conditions of grafting can be tailored to further fine-tune the membrane surface properties. This review focuses on the recent strategies in improving the surface design of liquid separation membranes through grafting-from technique, also known as graft polymerization, to improve membrane performance in wastewater treatment and desalination applications. An overview on membrane technology processes such as pressure-driven and osmotically driven membrane processes are first briefly presented. Grafting-from surface chemical modification approaches including chemical initiated, plasma initiated and UV initiated approaches are discussed in terms of their features, advantages and limitations. The innovations in membrane surface modification techniques based on grafting-from techniques are comprehensively reviewed followed by some highlights on the current challenges in this field. It is concluded that grafting-from is a versatile and effective technique to introduce various functional groups to enhance the surface properties and separation performances of liquid separation membranes.

Description: One of the challenges in the future of food production, amidst increasing population and decreasing resources, is developing a sustainable food production system. It is anticipated that robotics will play a significant role in maintaining the food production system, specifically in labor-intensive operations. Therefore, the main goal of this project is to develop a robotic fruit harvesting system, initially focused on the harvesting of apples. The robotic harvesting system is composed of a six-degrees-of-freedom (DOF) robotic manipulator, a two-fingered gripper, a color camera, a depth sensor, and a personal computer. This paper details the development and performance of a visual servo system that can be used for fruit harvesting. Initial test evaluations were conducted in an indoor laboratory using plastic fruit and artificial trees. Subsequently, the system was tested outdoors in a commercial fruit orchard. Evaluation parameters included fruit detection performance, response time of the visual servo, and physical time to harvest a fruit. Results of the evaluation showed that the developed visual servo system has the potential to guide the robot for fruit harvesting.

Description: In this study, we develop physics-informed neural networks (PINNs) to solve an isothermal fixed-bed (IFB) model for catalytic CO2 methanation. The PINN includes a feed-forward artificial neural network (FF-ANN) and physics-informed constraints, such as governing equations, boundary conditions, and reaction kinetics. The most effective PINN structure consists of 5–7 hidden layers, 256 neurons per layer, and a hyperbolic tangent (tanh) activation function. The forward PINN model solves the plug-flow reactor model of the IFB, whereas the inverse PINN model reveals an unknown effectiveness factor involved in the reaction kinetics. The forward PINN shows excellent extrapolation performance with an accuracy of 88.1% when concentrations outside the training domain are predicted using only one-sixth of the entire domain. The inverse PINN model identifies an unknown effectiveness factor with an error of 0.3%, even for a small number of observation datasets (e.g., 20 sets). These results suggest that forward and inverse PINNs can be used in the solution and system identification of fixed-bed models with chemical reaction kinetics.

Description: The objective of this study was to evaluate the effects of Bacillus subtillis PB6, chromium propionate or a combination of the two on the performance, egg and eggshell quality, nutrient metabolizability and serum biochemistry of layer breeders. White Plymouth Rock and Red Rhodes Island breeder hens at 55 weeks of age were allocated in individual cages using a completely randomized block design with 16 replicates. Hens were fed control, control + probiotic (500 g/ton of Bacillus subtilis PB6), control + CrProp (50 g/ton of chromium propionate) and control + probiotic + CrProp diets from 55 to 70 weeks of age. Productive parameters and eggshell quality as well as cortisol and blood biochemistry were grouped each 28 d as well as for the overall period. The metabolizability of nutrients and energy was determined at 70 weeks of age. In the overall period, hens fed the control + probiotic or control + probiotic + CrProp diets had significantly higher egg production, egg mass, shell percentage, thickness and shell strength. The metabolizability of dry matter, nitrogen and energy increased in hens that were fed the control + probiotic + CrProp diet. In conclusion, diets supplemented with Bacillus subtillis PB6 and chromium propionate resulted in improved productive performance, eggshell quality and nutrient metabolizability of layer breeders, without modifying serum cortisol, albumin and triglycerides.

Description: Artemisia annua L. is a herbaceous plant belonging to the Asteraceae family, known for producing, although at low levels, the sesquiterpene lactone artemisinin (AN), which is highly effective against malaria. In this study, an in vitro regeneration process of A. annua L. using ‘Artemis’ progeny was established and the potential of tissue culture for inducing new variability in terms of AN metabolism of in vitro regenerated plants was investigated. Among the plant growth regulators tested, the cytokinin 6-benzyladenine (BA) at 4.4 μM in combination with the auxin indole-butyric acid (IBA) at 0.35 μM yielded the greatest frequency of shoot induction. The optimal multiplication medium contained BA at 0.9 μM and naphthaleneacetic acid (NAA) at 0.05 μM. Regenerated plants (RPs), after transferring to the greenhouse and subsequently to the field, were analyzed during the growth cycle at different sampling times, showing a peak of AN content 20 days before blossom. Variability among different RPs and sampling times, in terms of AN and its precursors dihydroartemisinic acid (DHAA) and artemisinic acid (AA) was observed. This suggests that adventitious shoot induction could provide a useful strategy to induce variability influencing artemisinin metabolism as a consequence of in vitro manipulation.

Description: Over the last years, the replacement of traditional polymer modifiers with waste plastics has attracted increasing interest. The implementation of such technology would allow a drastic reduction of both production cost and landfill disposal of wastes. Among all, polyethylene-based plastics have been proved suitable for this purpose. The research activities presented in this paper aim to assess the synergistic effect of polyethylene and Fischer–Tropsch waxes on the viscoelastic properties and performance of the bitumen. In order to reduce the blending time, waxes, and polyethylene need to be added simultaneously. In fact, the presence of the waxes reduces the polarity of the bitumen matrix and increases the affinity with the polymer promoting its dispersion. Results demonstrate that the chain length of the waxes, the form of the added waste polyethylene, and the blending protocol have critical effects on the time-evolution of such properties. Short-chain waxes have a detrimental impact on the rutting resistance regardless of the blending protocol. On the contrary, long-chain waxes improve the overall behavior of the polyethylene-modified binders and, in particular, the resistance to permanent deformations.

Description: In this paper, a new methodology for the assessment of the so-called “acoustic capacity” of a road infrastructure is proposed. This aspect is very important in the field of transportation planning as, currently, road infrastructures are verified only in terms of physical capacity; at most, the environmental capacity due to atmospheric pollutants is taken into account, while the acoustic capacity is completely neglected. The acoustic capacity is assessed based on the Harmonoise model, which is widely recognized at the European level. The Harmonoise model, starting from traffic data, such as traffic flows, average speed, and typologies of vehicles, provides the levels of noise emissions and immissions, which can be compared to the noise limit levels established by law. The validity of the proposed methodology was assessed on a test network. The results of this analysis show that, generally, the acoustic capacity is actually a capacity constraint, which involves several traffic flows: this occurs in particular in the case of an intersection, but also in the case of a bi-directional road. Furthermore, the acoustic capacity of a road infrastructure is generally lower than its physical capacity.

Description: This paper investigates the hybrid source localization problem using differential received signal strength (DRSS) and angle of arrival (AOA) measurements. The main advantage of hybrid measurements is to improve the localization accuracy with respect to a single sensor modality. For sufficiently short wavelengths, AOA sensors can be constructed with size, weight, power and cost (SWAP-C) requirements in mind, making the proposed hybrid DRSS-AOA sensing feasible at a low cost. Firstly the maximum likelihood estimation solution is derived, which is computationally expensive and likely to become unstable for large noise levels. Then a novel closed-form pseudolinear estimation method is developed by incorporating the AOA measurements into a linearized form of DRSS equations. This method eliminates the nuisance parameter associated with linearized DRSS equations, hence improving the estimation performance. The estimation bias arising from the injection of measurement noise into the pseudolinear data matrix is examined. The method of instrumental variables is employed to reduce this bias. As the performance of the resulting weighted instrumental variable (WIV) estimator depends on the correlation between the IV matrix and data matrix, a selected-hybrid-measurement WIV (SHM-WIV) estimator is proposed to maintain a strong correlation. The superior bias and mean-squared error performance of the new SHM-WIV estimator is illustrated with simulation examples.

Description: Heme oxygenase (HO) is one of the cytoprotective enzymes that can mitigate the effects of oxidative stress. Here, we found that the ho mRNA level oscillates in the brain of Drosophila melanogaster with two minima at the beginning of the day and night. This rhythm was partly masked by light as its pattern changed in constant darkness (DD). It followed a similar trend in the clock mutant per01 under light/dark regime (LD12:12); however, differences between time points were not statistically significant. In older flies (20 days old), the rhythm was vanished; however, 15 days of curcumin feeding restored this rhythm with an elevated ho mRNA level at all time points studied. In addition, flies exposed to paraquat had higher ho expression in the brain, but only at a specific time of the day which can be a protective response of the brain against stress. These findings suggest that the expression of ho in the fly’s brain is regulated by the circadian clock, light, age, exposure to stress, and the presence of exogenous antioxidants. We also found that HO cross-talks with apoptosis and autophagy under different conditions. Induction of neuronal ho was accompanied by increased transcription of apoptosis and autophagy-related genes. However, this trend changed after exposure to curcumin and paraquat. Our results suggest that HO is involved in the control of apoptotic and autophagic key processes protecting the brain against oxidative damage.

Description: Over the years, the increasing acquisition of antibiotic resistance genes has led to the emergence of highly resistant bacterial strains and the loss of standard antibiotics’ efficacy, including β-lactam/β-lactamase inhibitor combinations and the last line carbapenems. Klebsiella pneumoniae is considered one of the major exponents of a group of multidrug-resistant ESKAPE pathogens responsible for serious healthcare-associated infections. In this study, we proved the antimicrobial activity of two analogues of Temporin L against twenty carbapenemase-producing K. pneumoniae clinical isolates. According to the antibiotic susceptibility assay, all the K. pneumoniae strains were resistant to at least one other class of antibiotics, in addition to beta-lactams. Peptides 1B and C showed activity on all test strains, but the lipidated analogue C expressed the greater antimicrobial properties, with MIC values ranging from 6.25 to 25 µM. Furthermore, the peptide C showed bactericidal activity at MIC values. The results clearly highlight the great potential of antimicrobial peptides both as a new treatment option for difficult-to-treat infections and as a new strategy of drug-resistance control.

Description: Assisted living (AL) is an emerging model of care in countries where long-term care needs are escalating, with emphasis given to promoting independence and autonomy among the residents to achieve active and healthy ageing. Unlike established nursing homes, the governance of AL is nebulous due to its novelty and diverse nature of operations in many jurisdictions. A comprehensive understanding of how AL is governed globally is important to inform regulatory policies as the adoption of AL increases. A systematic literature review was undertaken to understand the different levels of regulations that need to be instituted to govern AL effectively. A total of 65 studies, conducted between 1990 to 2020, identified from three major databases (PubMed, Medline, and Scopus), were included. Using a thematic synthesis analytical approach, we identified macro-level regulations (operational authorisation, care quality assessment and infrastructural requirements), meso-level regulations (operational management, staff management and distribution, service provision and care monitoring, and crisis management), and micro-level regulations (clear criteria for resident admission and staff hiring) that are important in the governance of AL. Large-scale adoption of AL without compromising the quality, equity and affordability would require clear provisions of micro-, meso- and macro-level regulations.

Description: Potato is the fourth staple crop in China after wheat, maize and rice. The agro-pastoral ecotone (APE) in North China is a main region for potato production. However, potato yield has been seriously constrained by water shortages because of low precipitation and highly variable precipitation patterns during the growing season in this area. In this study, the Agricultural Production Systems Simulator (APSIM) model was used to simulate potato water-limited yield and historical years were divided into different water-temperature year types to optimize the optimal planting period (OPP) and cultivar of potato. The results showed that the potato yield varied in different water-temperature year types. Fast-developing cultivar Favorita could obtain the highest yield in most places and water-temperature year types due to its relatively short length of tuber formation stage. In this study, we suggest changing the planting date according to the water-temperature year type, which offers a new way to adapt to a highly variable climate. However, our method should be adopted carefully because we only considered climate factors; other agronomic management practices (adjusting planting density, plastic film mulch, conservation tillage etc.) also have a great effect on planting date and cultivar selection, which should be further investigated in the future.

Description: Metal nanostructures exhibit specific optical characteristics owing to their localized surface plasmon resonance (LSPR) and have been studied for applications in various optical devices. The LSPR property strongly depends on the size and shape of metal nanostructures; thus, plasmonic devices must be designed and fabricated according to their uses. Nanoimprint lithography (NIL) is an effective process for repeatedly fabricating metal nanostructures with controlled sizes and shapes and require optical properties. NIL is a powerful method for mass-producible, low-cost, and large-area fabrication. However, the process lacks flexibility in adjusting the size and shape according to the desirable optical characteristics because the size and shape of metal nanostructures are determined by a single corresponding mold. Here, we conducted a re-shaping process through the air-plasma etching of a polymer’s secondary mold (two-dimensional nanopillar array made of cyclo-olefin polymer (COP)) to modulate the sizes and shapes of nanopillars; then, we controlled the spectral characteristics of the imprinted plasmonic devices. The relationship between the structural change of the mold, which was based on etching time, and the optical characteristics of the corresponding plasmonic device was evaluated through experiments and simulations. According to evaluation results, the diameter of the nanopillar was controlled from 248 to 139 nm due to the etching time and formation of a pit structure. Consequently, the spectral properties changed, and responsivity to the surrounding dielectric environment was improved. Therefore, plasmonic devices based on the re-shaped COP mold exhibited a high responsivity to a refractive index of 906 nm/RIU at a wavelength of 625 nm.

Description: A polycrystalline diamond (PCD) tool is employed in cutting various titanium alloys because of its excellent properties. However, improving the cutting performance of titanium alloys is still a challenge. Here, an experimental investigation on the influence of ultrasonic vibration-assisted machining (UVAM) of Ti6Al4V titanium alloy on the cutting performance and action mechanism was studied using a PCD tool. Cutting force, machined surface, surface adhesion, and wear morphology were analyzed. The results indicated that UVAM can effectively improve cutting performance. It was found that there was serious adhesion and wear of slight fragments close to the cutting edge after ultrasonic-assisted dry milling. Furthermore, the action mechanism of UVAM in improving cutting performance was discussed and analyzed from the perspective of intermittent cutting.

Description: Stripping crystallization (SC) was introduced in this work to purify p-chlorophenol from the p-chlorophenol-rich liquid mixture and to purify m-chlorophenol from the m-chlorophenol-rich liquid mixture, respectively. Essentially, SC combines melt crystallization and vaporization to produce the solid product and the vapor from a liquid mixture via a series of three-phase transformations at reduced pressures during the cooling process. At the end of the SC, only the solid product remained while the liquid mixture was almost eliminated and the produced vapor was removed. A set of differential equations based on the mass and energy balances were proposed to determine the incremental variations of the amounts of remaining liquid, produced solid and produced vapor during the batch SC process. The experimental yield and product purity of the final product obtained from the batch SC experiments were compared with those predicted by the model.

Description: Gunung Dahu Research Forest (GDRF) is a 250 ha tropical degraded land reforested by native dipterocarps species. The reforestation success was valued by evaluating the planted trees’ growth performance, their potential timber stock, natural regeneration capacity, soil improvement, biological interdependence, and environmental services. This scientific report used a combination of literature review and also primary data processing to describe the reforestation success within the area. A hilly species of Shorea platyclados showed the best growth performance with its average diameter and height of 43 cm and 23 m, respectively, with its mean diameter annual increment of 2.1 cm/year and the predicted standing stock at 220 m3/ha. Six Shorea species were identified to show their natural regeneration capacity and the occurrence of ectomycorrhizal fruiting bodies, predominantly by the genus Rusula, determined the establishment of biological interdependency at the site. Reforestation improved soil organic matters as revealed by high soil porosity (51,06%–52,32%) and infiltration rate (120–155,33 mm/hr). The reforested landscape also ensures a continuous water supply and provides an economic benefit for the community. Thus, planting native trees for reforesting degraded tropical landscapes is prospective and may deliver multiple benefits in an ecological and economic view.

Description: Dimethacarb is a carbamate insecticide developed in China that contains 3,5-dimethylphenyl methylcarbamate (XMC) and 3,4-dimethylphenyl methylcarbamate (MPMC) isomers. Dimethacarb has been registered for use in rice in China, but no residue or degradation of dimethacarb in rice has been reported and the maximum residue limits (MRLs) for rice have not been established. A versatile high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) method was developed with modified QuEChERS sample preparation to determine two isomers of dimethacarb in rice. The average recovery of XMC and MPMC in brown rice, rice husk, and rice straw ranged from 71.69 to 100.60%, with spike levels of 0.01 to 1 mg/kg and relative standard deviations (RSDs) of 0.21 to 8.41%. Field experiments showed that the half-lives of XMC and MPMC in rice straw were 4.08 to 4.23 days and 3.48 to 3.69 days, respectively. Final residues of XMC and MPMC in rice husk after 21 days of spraying at six sites ranged from 0.23–2.65 mg/kg and 0.06–1.10 mg/kg, and

Description: The elementary particles of relativistic quantum field theory are not simple field quanta, as has long been assumed. Rather, they supplement quantum fields, on which they depend on but to which they are not reducible, as shown here with particles defined instead as a unified collection of properties that appear in both physical symmetry group representations and field propagators. This notion of particle provides consistency between the practice of particle physics and its basis in quantum field theory.

Description: Roller cone drill bits are used in drilling larger diameter wells. The drilling efficiency of the roller cone drill bit depends on the wear rate of the materials that forms bit teeth, which crushes the rock at the bottom of the well. To prevent excessive wear, research has largely focused on the study and determination of abrasion-resistant materials. In our work, we investigated the wear mechanism of a roller cone drill bit whose wear-resistant teeth are protected by a hard metal coating welded onto the teeth. The difference between material properties of erosion-protective carbide coating and the tooth steel leads to uneven wear of bit teeth. In order to determine the material changes, we carried out detailed studies of the rock through which drilling was carried out, the drilling parameters and the materials of which the roller cone bit is made. The principle of wear of the tooth materials and their carbide coating, determined by our research, indicated the guidelines which could be basis for the development of abrasion-resistant materials could be carried out, as well as the problem of applying an erosion protection to the teeth of the studied type of roller cone bits.

Description: In response to the drug-resistant tuberculosis (DRTB) ototoxicity burden in South Africa, ototoxicity monitoring has been decentralised, with community health workers (CHWs) acting as facilitators. This study describes a community-based ototoxicity monitoring programme (OMP) for patients with DRTB. Findings are compared to the recommended guidelines for ototoxicity monitoring, the OMP protocol and published studies. This was a retrospective study of longitudinal ototoxicity monitoring of 831 patients with DRTB, using data collected at community-based clinics in the City of Cape Town between 2013 and 2017. Approximately half (46.8%) of the patients had an initial assessment conducted in accordance with the OMP protocol recommendations, and follow-up rates (79.5%) were higher than those of a similar DRTB programme. However, patients in this study were not monitored within the timeframes or with the regularity recommended by the guidelines or the OMP protocol. Extended high-frequency pure-tone audiometry (27.5%) was underutilised by testers and data recording was inconsistent (e.g. 37.7% of patient gender was not recorded by testers). Community-based OMP using CHWs to facilitate monitoring showed improvement over previous hospital-based reports, with more accessible services and higher follow-up rates. However, to improve OMP outcomes, OMP managers should reassess current protocols and data recording practices.

Description: Taro (Colocasia esculenta (L.) Schott) is a staple food crop in the Asia-Pacific region in areas where rising sea levels are threatening agricultural production. However, little is known about its response to salinity. In this study, we investigated the effects of salinity on the growth, morphology, physiology, and chemical traits of taro to predict the impacts of rising sea levels on taro production and nutritional value in the Pacific. We grew taro (approximately 4 months old) with a range of NaCl treatments (0–200 mM) for 12 weeks. Full nutrient, micronutrient, and secondary metabolite analyses were conducted, including measures of calcium oxalate (CaOx), an irritant that reduces palatability. Significant reductions in growth and biomass were observed at and above 100 mM NaCl. Concentrations of macro- and micronutrients, including sodium, were higher on a per mass basis in corms of plants experiencing salt stress. Foliar sodium concentrations remained stable, indicating that taro may utilize a salt exclusion mechanism. There was a large amount of individual variation in the concentrations of oxalate and phenolics, but overall, the concentrations were similar in the plants grown with different levels of salt. The total contents of CaOx and phenolics decreased in plants experiencing salt stress. Taro’s ability to survive and produce corms when watered with a 200 mM NaCl solution places it among the salt-tolerant non-halophytes. The nutritional quality of the crop is only marginally affected by salt stress. Taro is, therefore, likely to remain a useful staple in the Pacific region in the future.

Description: Direct ethanol fuel cells (DEFCs) have shown a high potential to supply energy and contribute to saving the climate due to their bioethanol sustainability and carbon neutrality. Nonetheless, there is a consistent need to develop new catalyst electrodes that are active for the ethanol oxidation reaction (EOR). In this work, two C-supported PdIrNi catalysts, that have been reported only once, are prepared via a facile NaBH4 co-reduction route. Their physiochemical characterization (X-ray diffraction (XRD), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray photoelectron spectroscopy (XPS)) results show alloyed PdIrNi nanoparticles that are well dispersed (〈 3 nm) and exist in metallic state that is air-stable apart from Ni and, slightly, Pd. Their electrocatalytic activity towards EOR was evaluated by means of cyclic voltammetry (CV) and chronoamperometry (CA). Even though the physiochemical characterization of PdIrNi/C and Pd4Ir2Ni1/C is promising, their EOR performance has proven them less active than their Pd/C counterpart. Although the oxidation current peak of Pd/C is 1.8 A/mgPd, it is only 0.48 A/mgPd for Pd4Ir2Ni1/C and 0.52 A/mgPd for PdIrNi/C. These results were obtained three times and are reproducible, but since they do not add up with the sound PdIrNi microstructure, more advanced and in situ EOR studies are necessary to better understand the poor EOR performance.

Description: As the number of stroke survivors is continuously growing, with an important number suffering from consequent functional deficits, the rehabilitation field is facing more complex demands. Technological progress gives us the opportunity to remotely assist patients while they exercise at home through telerehabilitation (TR), addressing the problems of limited medical resources and staff, difficult transportation, or living a long distance from rehabilitation centers. In addition, TR is a way to provide continuity in long-term post-stroke recovery during the COVID-19 pandemic, which limits traveling and human interaction. While the implementation of TR is increasing, the biggest challenges are to raise patients’ acceptability of the new method and their motivation and engagement during the program. In this review, we aimed to find methods to address these challenges by identifying the patients who benefit the most from this therapy and efficiently organizing the space and technology used for telerehabilitation. User-friendly technologies and devices along with therapists’ constant support and feedback are some of the most important aspects that make TR an efficient intervention and an alternative to conventional therapy.

Description: Leishmaniasis and Chagas disease are neglected tropical diseases that cause problems in developing countries. The causative agents, Leishmania spp. and Trypanosoma cruzi, produce a clinical picture that can be fatal for the patient, such as Chagas heart disease, visceral leishmaniasis and megacolon, among others. Current treatments for these diseases are not very effective and highly toxic, since they require very prolonged treatments. The development of innovative, effective and safe drugs to fight infections caused by these parasites remains a challenge. For this reason, in recent years, there has been an increase in the search for new therapies. In this study, the antikinetoplastid activity of 13 sesquiterpene lactones obtained from Palythoa aff. clavata was screened against L. amazonensis, L. donovani and T. cruzi. The results revealed that the sesquiterpene lactones anhydroartemorin (2), cis,trans-costunolide-14-acetate (3) and 4-hydroxyarbusculin A (11) were the most selective against the kinetoplastid species studied. These molecules seem to induce the mechanisms involved in an apoptotic-like death or programmed cell death (PCD) in the kinetoplastids, and since they do not cause necrosis, the inflammatory events associated with this type of cell death will not be triggered.

Description: Background: Salmonellaenterica is one of the common pathogens in both humans and animals that causes salmonellosis and threatens public health all over the world. Methods and Results: Here we determined the virulence phenotypes of nine Salmonellaenterica subsp. enterica (S. enterica) isolates in vitro and in vivo, including pathogenicity to chicken, cell infection, biofilm formation and virulence gene expressions. S. Enteritidis 211 (SE211) was highly pathogenic with notable virulence features among the nine isolates. The combination of multiple virulence genes contributed to the conferring of the high virulence in SE211. Importantly, many mobile genetic elements (MGEs) were found in the genome sequence of SE211, including a virulence plasmid, genomic islands, and prophage regions. The MGEs and CRISPR-Cas system might function synergistically for gene transfer and immune defense. In addition, the neighbor joining tree and the minimum spanning tree were constructed in this study. Conclusions: This study provided both the virulence phenotypes and genomic features, which might contribute to the understanding of bacterial virulence mechanisms in Salmonella enterica subsp. enterica. The first completed genomic sequence for the high virulent S. Enteritidis isolate SE211 and the comparative genomics and phylogenetic analyses provided a preliminary understanding of S. enterica genetics and laid the foundation for further study.

Description: In recent years, tryptophan metabolism via the kynurenine pathway has become one of the most active research areas thanks to its involvement in a variety of physiological processes, especially in conditions associated with immune dysfunction, central nervous system disorders, autoimmunity, infection, diabetes, and cancer. The kynurenine pathway generates several metabolites with immunosuppressive functions or neuroprotective, antioxidant, or toxic properties. An increasing body of work on this topic uncovers a need for reliable analytical methods to help identify and quantify tryptophan metabolites at physiological concentrations in biological samples of different origins. Recent methodological advances in the fabrication and application of electrochemical sensors promise a rise in the future generation of novel analytical systems. This work summarizes current knowledge and provides important suggestions with respect to direct electrochemical determinations of kynurenine pathway metabolites (kynurenines) in complex biological matrices. Measurement challenges, limitations, and future opportunities of electroanalytical methods to advance study of the implementation of kynurenines in disease conditions are discussed.

Description: The mass farming of the black soldier fly (BSF; Hermetia illucens L.), to produce insect-based feed for livestock and fish, results in considerable amounts of insect frass, which contains substantial amounts of organic matter and bioavailable nutrients. Insect frass has shown good potential as a soil amendment and organic fertilizer. This study examined the effects of HexaFrass™ on the growth of common vegetables and herbs under glasshouse conditions. In an organically-rich potting mix, HexaFrass™ increased shoot dry weight by an average of 25%, although this effect was variable among test plants. In other trials, application of HexaFrass™ caused an increase in plant growth similar to that obtained by applying chicken manure and a commercial organic fertilizer. Increases in shoot and root dry weight showed quadratic relationships with HexaFrass™ dose, indicating that application of excessive quantities could lead to plant inhibition. Shoot:root dry matter ratio tended to increase with HexaFrass™ dose suggesting there was no specific stimulation or enhancement of root growth. Overall, these results provide further evidence of the potential of insect frass as an effective organic fertilizer for vegetables and herbs.

Description: Strigolactones (SLs) are a prime example of allelochemicals, promoting parasitic plant germination and certain hyphal branching factors associated to the growth of symbiotic arbuscular mycorrhizal fungi (AMF). However, the study of SLs is complex, and various issues have yet to be studied in depth. This review intends to provide an overview of the works that have been conducted on the identification, isolation, and evaluation of the allelopathic activity of natural canonical and non-canonical SLs on parasitic weeds and AMF growth. These topics were related with their application in agriculture through trap crops, suicidal germination or intercropping strategies. The high applicability of SLs in agriculture, for example, as preventing herbicides for parasitic weed control, has increased the interest for these compounds and the number of research articles published. This review updates and discusses the last findings in this field, with special emphasis in the results published since 2015, using tables and graphs to summarize and discuss that information. The promising results and conclusions obtained from the bioassays herein presented provide a good reason to encourage and support further research works on these natural products, which must also consider the disadvantages or current limitations that SLs present.

Description: Nowadays, the demand for personalized goods is increasing, with small batches of customized products. Companies are asked to cope with this need to be more competitive; thus, it is crucial to optimally set up the production process to cope with the demand. Among the products composed of several parts, sales kits occupy a significant role. Sales kits are sets of different components, supplied as a single unit. Automation is usually used to reduce the unit direct production costs for assembled products, and this is especially true for kitting since it has minimum added value, compared to other technologies. The wide range of components leads to frequent reconfiguration of the feeding devices between different products, increasing the setup time. The aim of this work is to provide a model that minimizes the setup times of automatic kitting systems when working with a high variety of products. To reach this goal, we propose to apply the traveling salesman problem (TSP) to the production process by integrating a multi-clustering model, thus increasing its appeal to several applications. This method is applied both to simulations and to a real case study, and proves to be able to provide a good solution in a reasonable time.

Description: Birds use song for several goals as defending territory, alerting a partner to the presence of a predator, or wooing a female for breeding. This study aims to identify the morphometric parameters which determine the variability of the number of syllables in the “sexy” songs of yellow-fronted canary. For this purpose, sixteen morphometric parameters were measured among 170 yellow-fronted canaries captured, in four agroecological zones in North Benin. The results showed that the morphometry of yellow-fronted canary varies according to its habitat and the type of song. The categorization of the sample studied allowed to retain two groups which differ in the importance of body characters and the number of sexy syllables issued when singing. Yellow-fronted canaries from the Sudanese climate zone not only have superior morphometric characters compared to other zones, but also have a song composed of several different sexy syllables. A binary logistic regression model with selection of variables revealed that the index of beak shape, abdomen length, and tail length are the determining characteristics of the number of sexy syllables. These results are needed for future breeding and conservation studies of the species.

Description: The genus Cantharellus, commonly known as chanterelles, has recently been divided into six subgenera; however, wider sampling approaches are needed to clarify the relationships within and between these groups. A phylogenetic overview of Cantharellus subgenus Parvocantharellus in China was inferred based on the large subunit nuclear ribosomal RNA gene (nrLSU), the DNA-directed RNA polymerase II subunit 2 (rpb2), and the transcription elongation factor 1-alpha (tef1). A total of nine species from China were assigned to the subgenus, including seven novel species, namely Cantharellusaurantinus, C. austrosinensis, C. galbanus, C. luteolus, C. luteovirens, C. minioalbus, and C. sinominior, and two known species, namely C. albus and C. zangii. The detailed descriptions and illustrations were provided based on the newly obtained data, with the comparisons to closely related species. C. zangii was restudied based on the paratype specimens and multiple new collections from the type locality. Futhermore, the Indian species C. sikkimensis was identified as a synonym of C. zangii based on the morphological and molecular analyses. A key to the Chinese species belonging to the subg. Parvocantharellus is also provided.

Description: An idealized 1:2 scale demonstrator and a numerical parameter optimization algorithm are proposed to closely reproduce the deformation shape and, thus, spatial strain directions of a real aerodynamically loaded civil aircraft spoiler using only four concentrated loads. Cost-efficient experimental studies on demonstrators of increasing complexity are required to transfer knowledge from coupons to full-scale structures and to build up confidence in novel structural health monitoring (SHM) technologies. Especially for testing novel sensor systems that depend on or are affected by mechanical strains, e.g., strain-based SHM methods, it is essential that the considered lab-scale structures reflect the strain states of the real structure at operational loading conditions. Finite element simulations with detailed models were performed for static strength analysis and for comparison to experimental measurements. The simulated and measured deformations and spatial strain directions of the idealized demonstrator correlated well with the numerical results of the real aircraft spoiler. Thus, using the developed idealized demonstrator, strain-based SHM systems can be tested under conditions that reflect operational aerodynamic pressure loads, while the test effort and costs are significantly reduced. Furthermore, the presented loading optimization algorithm can be easily adapted to mimic other pressure loads in plate-like structures to reproduce specific structural conditions.

Description: Self-management support and lifestyle interventions with an empowerment approach have been found to be effective strategies for health improvement among people at risk for or living with type 2 diabetes. Telephone coaching seems particularly efficient for individuals with low socioeconomic status and culturally and linguistically diverse backgrounds. In this mixed methods study, we investigate a telephone-delivered health coaching intervention provided by the diabetes project SMART2D (Self-Management Approach and Reciprocal learning for Type 2 Diabetes) implemented in socioeconomically disadvantaged areas in Stockholm, Sweden. We focus on the interaction between participants and facilitators as part of intervention fidelity. Recorded coaching sessions were scored using an interaction tool and analyzed by exploratory factor analysis and recorded supervisory discussions with facilitators analyzed using thematic analysis. The quantitative analysis showed that the intervention components were delivered as intended; however, differences between facilitators were found. The qualitative data highlighted differences between facilitators in the delivery, especially in relation to dietary and physical activity goalsetting. The level of language skills hindered the delivery flow and the tailoring of sessions to participants’ needs led to different delivery styles. The interaction between facilitators and participants is an important aspect of intervention implementation. Tailoring of interventions is necessary, and language-skilled facilitators are needed to minimize barriers in intervention delivery.

Description: A new probability distribution to study lifetime data in reliability is introduced in this paper. This one is a first approach to a non-homogeneous phase-type distribution. It is built by considering one cut-point in the non-negative semi-line of a phase-type distribution. The density function is defined and the main measures associated, such as the reliability function, hazard rate, cumulative hazard rate and the characteristic function, are also worked out. This new class of distributions enables us to decrease the number of parameters in the estimate when inference is considered. Additionally, the likelihood distribution is built to estimate the model parameters by maximum likelihood. Several applications considering Resistive Random Access Memories compare the adjustment when phase type distributions and one cut-point phase-type distributions are considered. The developed methodology has been computationally implemented in R-cran.

Description: The concept of Heider balance, usually applied to interpersonal relations, is generalized here to opinions gathered in surveys. At first, we compare four algorithms, which drive a matrix dataset to a balanced state. The criterion is that the final state obtained with an algorithm should be as close as possible to the initial state. The result is that deterministic differential equations work better than their Monte Carlo counterparts. Next, we apply the winning algorithms to the matrix of correlations between opinions gathered in American states between 1974 and 1998. The results are interpreted in terms of the classic comfort hypothesis (E. Babbie, 2007).

Description: The Pedersen Process was developed at the beginning of the 20th century as an alternative process to the Bayer route for producing alumina Al2O3. A successful operation in an industrial environment took place in Norway from 1925 to 1969. It ended due to economic reasons. Having a smaller environmental footprint (no bauxite residue) and the ability to handle alternative raw materials makes the approach promising for grappling with future challenges in Europe. This paper shows the status of the ongoing European Commission-funded work and the outline of a first industrial process concept.

Description: As a common depressant, acidified water glass (AWG) has strong inhibitory effects on fluorite and calcite. The inhibited fluorite is difficult to be recovered, thus resulting in the waste of resources and low flotation efficiency. In this study, the interaction of fluoride ions with fluorite and calcite surfaces was investigated, and its effects of AWG adsorption on mineral surfaces were evaluated. Micro-flotation experiments indicated that the flotation recovery of fluorite is 88.72% after fluoride ion treatment, that is, approximately fourfold with respect to that without fluoride ion modification. The results of solution chemical calculations showed that SiO(OH)3 is the main component to inhibit fluorite, and Si(OH)4 is the main component to inhibit calcite in AWG solution. XPS and ICP-MS results showed that fluoride ions can improve the floatability of fluorite by converting CaSiO3 on the surface of fluorite into CaF2, but the conversion ability of Si(OH)4 on the surface of calcite is weak, which increases the difference in floatability between fluorite and calcite. The above results were further verified by the analysis of flotation foam image and contact angle measurement. After fluorine ion treatment, the contact angle of fluorite increased, and it was more easily adsorbed on the foam. Therefore, the interaction of the fluoride ion with the fluorite surfaces eliminated the adsorption of AWG on fluorite, thereby resulting in the enhanced hydrophobicity of fluorite. Different from the traditional metal ions modification, the idea of anion modification in this paper is expected to be further studied.

Description: With over 1.1 billion trips made daily for work, education, or leisure, transportation systems are vital to the functioning of cities in the United States. However, these systems are highly vulnerable to the impacts of climate change. The current study investigated perception differences about climate change between transportation professionals (N = 22) and the general public (N = 2034). The study revealed that (i) transportation professionals find climate change important, worrisome and harmful to themselves and future generations; (ii) knowledge of climate change and its consequences on transportation systems is limited on average among the general public; (iii) the public holds higher levels of misperceptions about climate change; (iv) the general public is more willing to embrace the suggestions of family and friends than climate scientists regarding the issue; (v) the general public holds a higher perception of behavioral control and confidence in their ability to carry out mitigative actions; and (vi) the public has lower information-seeking intentions about climate change. Based on the study findings, areas where perceptions differ may be considered during policy formulation and implementation processes to encourage pro-environmental behavioral changes that will reduce anthropogenic carbon emissions and enhance the functionality of transportation infrastructure.

Description: The nature and mechanisms of interaction between two selected methyl benzoate derivatives (methyl o-methoxy p-methylaminobenzoate–I and methyl o-hydroxy p-methylaminobenzoate–II) and model transport protein bovine serum albumin (BSA) was studied using steady-state and time-resolved spectroscopic techniques. In order to understand the role of Trp residue of BSA in the I-BSA and II-BSA interaction, the effect of free Trp amino acid on the both emission modes (LE–locally excited (I and II) and ESIPT–excited state intramolecular proton transfer (II)) was investigated as well. Experimental results show that the investigated interactions (with both BSA and Trp) are mostly conditioned by the ground and excited state complex formation processes. Both molecules form stable complexes with BSA and Trp (with 1:1 stoichiometry) in the ground and excited states. The binding constants were in the order of 104 M−1. The absorption- and fluorescence-titration experiments along with the time-resolved fluorescence measurements show that the binding of the I and II causes fluorescence quenching of BSA through the static mechanism, revealing a 1:1 interaction. The magnitude and the sign of the thermodynamic parameters, ΔH, ΔS, and ΔG, determined from van’t Hoff relationship, confirm the predominance of the hydrogen-bonding interactions for the binding phenomenon. To improve and complete knowledge of methyl benzoate derivative-protein interactions in relation to supramolecular solvation dynamics, the time-dependent fluorescence Stokes’ shifts, represented by the normalized spectral response function c(t), was studied. Our studies reveal that the solvation dynamics that occurs in subpicosecond time scale in neat solvents of different polarities is slowed down significantly when the organic molecule is transferred to BSA cavity.

Description: Introduction: Retinal imaging is a non-invasive tool to study both retinal vasculature and neurodegeneration. In this exploratory retinal curcumin-fluorescence imaging (RFI) study, we sought to determine whether retinal vascular features combined with retinal amyloid burden correlate with the neurocognitive status. Methods: We used quantitative RFI in a cohort of patients with cognitive impairment to automatically compute retinal amyloid burden. Retinal blood vessels were segmented, and the vessel tortuosity index (VTI), inflection index, and branching angle were quantified. We assessed the correlations between retinal vascular and amyloid parameters, and cognitive domain Z-scores using linear regression models. Results: Thirty-four subjects were enrolled and twenty-nine (55% female, mean age 64 ± 6 years) were included in the combined retinal amyloid and vascular analysis. Eleven subjects had normal cognition and 18 had impaired cognition. Retinal VTI was discriminated among cognitive scores. The combined proximal mid-periphery amyloid count and venous VTI index exhibited significant differences between cognitively impaired and cognitively normal subjects (0.49 ± 1.1 vs. 0.91 ± 1.4, p = 0.006), and correlated with both the Wechsler Memory Scale-IV and SF-36 mental component score Z-scores (p 〈 0.05). Conclusion: This pilot study showed that retinal venular VTI combined with the proximal mid-periphery amyloid count could predict verbal memory loss. Future research is needed to finesse the clinical application of this retinal imaging-based technology.

Description: A spatial and temporal heterogeneity analysis of residential land prices, in general, is crucial for maintaining high-quality economic development. Previous studies have attempted to explain the geographical evolution rule by studying spatial-temporal heterogeneity, but they have neglected the contextual information, such as school district, industrial zone, population density, and job density, associated with residential land prices. Therefore, in this study, we consider contextual factors and propose a revised local regression algorithm called the contextualized geographically and temporally weighted regression (CGTWR), to effectively address spatiotemporal heterogeneity, and to creatively extend the feasibility of importing the contextualization into the GTWR model. The quantitative impact of contextual information on residential land prices was identified in Shijiazhuang (SJZ) city from 1974 to 2021. Empirical analyses demonstrated that school district and industrial zone factors played important roles in residential land prices. Notably, the distance from a residential area to an industrial zone was significantly positively correlated with residential land prices. In addition, a positive relationship between school districts and residential land prices was also observed. Finally, the R2 value of the CGTWR model was 92%, which was superior to those of ordinary least squares (OLS, 76%), geographically weighted regression (GWR, 85%), contextualized geographically weighted regression (CGWR, 86%), and GTWR (90%) models. These evaluation results indicate that the CGTWR algorithm, which incorporates contextual information and spatiotemporal variation, could provide policy makers with evidence for understanding the nature of varying relationships within a land price dataset in China.

Description: Air temperature (Ta), defined as the temperature 2 m above the land’s surface, is one of the most important factors for environment and climate studies. Ta can be measured by obtaining the land surface temperature (LST) which can be retrieved with the 11- and 12-µm bands from satellite imagery over a large area, and LST is highly correlated with Ta. To measure the Ta in a broad area, we studied a Ta retrieval method through Deep Neural Network (DNN) using in-situ data and satellite data of South Korea from 2014 to 2017. To retrieve accurate Ta, we selected proper input variables and conditions of a DNN model. As a result, Normalized Difference Vegetation Index, Normalized Difference Water Index, and 11- and 12-µm band data were applied to the DNN model as input variables. And we also selected proper condition of the DNN model with test various conditions of the model. In validation result in the DNN model, the best accuracy of the retrieved Ta showed an correlation coefficient value of 0.98 and a root mean square error (RMSE) of 2.19 K. And then we additional 3 analysis to validate accuracy which are spatial representativeness, seasonal analysis and time series analysis. We tested the spatial representativeness of the retrieved Ta. Results for window sizes less than 132 × 132 showed high accuracy, with a correlation coefficient of over 0.97 and a RMSE of 1.96 K and a bias of −0.00856 K. And in seasonal analysis, the spring season showed the lowest accuracy, 2.82 K RMSE value, other seasons showed high accuracy under 2K RMSE value. We also analyzed a time series of six the Automated Synoptic Observing System (ASOS) points (i.e., locations) using data obtained from 2018 to 2019; all of the individual correlation coefficient values were over 0.97 and the RMSE values were under 2.41 K. With these analysis, we confirm accuracy of the DNN model was higher than previous studies. And we thought the retrieved Ta can be used in other studies or climate model to conduct urban problems like urban heat islands and to analyze effects of arctic oscillation.

Description: As a multifactorial disease, treatment of cancer depends on understanding unique mechanisms involved in its progression. The cancer stem cells (CSCs) are responsible for tumor stemness and by enhancing colony formation, proliferation as well as metastasis, and these cells can also mediate resistance to therapy. Furthermore, the presence of CSCs leads to cancer recurrence and therefore their complete eradication can have immense therapeutic benefits. The present review focuses on targeting CSCs by natural products in cancer therapy. The growth and colony formation capacities of CSCs have been reported can be attenuated by the dietary agents. These compounds can induce apoptosis in CSCs and reduce tumor migration and invasion via EMT inhibition. A variety of molecular pathways including STAT3, Wnt/β-catenin, Sonic Hedgehog, Gli1 and NF-κB undergo down-regulation by dietary agents in suppressing CSC features. Upon exposure to natural agents, a significant decrease occurs in levels of CSC markers including CD44, CD133, ALDH1, Oct4 and Nanog to impair cancer stemness. Furthermore, CSC suppression by dietary agents can enhance sensitivity of tumors to chemotherapy and radiotherapy. In addition to in vitro studies, as well as experiments on the different preclinical models have shown capacity of natural products in suppressing cancer stemness. Furthermore, use of nanostructures for improving therapeutic impact of dietary agents is recommended to rapidly translate preclinical findings for clinical use.

Description: This Special Issue focuses on the molecular mechanisms involved in therapeutic resistance, lineage plasticity, and phenotypic reprogramming leading to prostate cancer recurrence and, ultimately, lethal disease [...]

Description: Inhaled nebulized interferon (IFN)-α and IFN-β have been shown to be effective in the management of coronavirus disease 2019 (COVID-19). We aimed to construct a virus-free rapid detection system for high-throughput screening of IFN-like compounds that induce viral RNA degradation and suppress the replication of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). We prepared a SARS-CoV-2 subreplicon RNA expression vector which contained the SARS-CoV-2 5′-UTR, the partial sequence of ORF1a, luciferase, nucleocapsid, ORF10, and 3′-UTR under the control of the cytomegalovirus promoter. The expression vector was transfected into Calu-3 cells and treated with IFN-α and the IFNAR2 agonist CDM-3008 (RO8191) for 3 days. SARS-CoV-2 subreplicon RNA degradation was subsequently evaluated based on luciferase levels. IFN-α and CDM-3008 suppressed SARS-CoV-2 subreplicon RNA in a dose-dependent manner, with IC50 values of 193 IU/mL and 2.54 μM, respectively. HeLa cells stably expressing SARS-CoV-2 subreplicon RNA were prepared and treated with the IFN-α and pan-JAK inhibitor Pyridone 6 or siRNA-targeting ISG20. IFN-α activity was canceled with Pyridone 6. The knockdown of ISG20 partially canceled IFN-α activity. Collectively, we constructed a virus-free rapid detection system to measure SARS-CoV-2 RNA suppression. Our data suggest that the SARS-CoV-2 subreplicon RNA was degraded by IFN-α-induced ISG20 exonuclease activity.