ALBERT

Description / Table of Contents: PREFACE The CERN Accelerator School (CAS) was founded in 1983 with the aim to preserve and disseminate the knowledge accumulated at CERN (European Organization for Nuclear Research) and elsewhere on particle accelerators and storage rings. This is being achieved by means of a biennial programme of basic and advanced courses on general accelerator physics supplemented by specialized and topical courses as well as Workshops. The chapters included in this present volume are taken from one of the specialized courses, Applied Geodesy for Particle Accelerators, held at CERN in April 1986. When construction of the first large accelerators started in the 1950's, it was necessary to use geodetic techniques to ensure precise positioning of the machines' components. Since that time the means employed have constantly evolved in line with technological progress in general, while a number of specific developments - many of them achieved at CERN - have enriched the range of available instruments. These techniques and precision instruments are used for most of the world's accelerators but can also be applied in other areas of industrial geodesy: surveying of civil engineering works and structures, aeronautics, nautical engineering, astronomical radio-interferometers, metrology of large dimensions, studies of deformation, etc. The ever increasing dimensions of new accelerators dictates the use of the best geodetic methods in the search for the greatest precision, such as distance measurements to 10 -7, riqorous evaluation of the local geoid and millimetric exploitation of the Navstar satellites. At the same time, the powerful computer methods now available for solving difficult problems are also applicable at the instrument level where data collection can be automatically checked. Above all, measuring methods and calculations and their results can be integrated into data bases where the collection of technical parameters can be efficiently managed. In order to conserve the logical presentation of the different lectures presented at the CAS school, the chapters presented here have been grouped under four main topics. The first and the fourth deal with spatial and theoretical geodesy, while the second and third are concerned with the work of applied geodesy, especially that carried out at CERN. Readers involved in these subjects will find in the following chapters, if not the complete answer to their problems, at least the beginning of solutions to them.

Description / Table of Contents: Starting from a more general discussion of mechanisms controlling organic carbon deposition in marine environments and indicators useful for paleoenvironmental reconstructions, this study concentrates on detailed organic-geochemical and sedimentological investigations of late Cenozoic deep-sea sediments from (1) the Baffin Bay and the Labrador Sea (ODP-Leg 105), (2) the upwelling area off Northwest Africa (ODP-Leg 108), and (3) the Sea of Japan (ODP-Leg 128). Of major interest are shortas well as long-term changes in organic carbon accumulation during the past 20 m.y. As shown in the data from ODP-Legs 105, 108, and 128, sediments characterized by similar high organic carbon contents can be deposited in very different environments. Thus, simple total organic carbon data do not allow (i) to distinguish between different factors controlling organic carbon enrichment and (ii) to reconstruct the depositional history of these sediments. Data on both quantity and composition of the organic matter, however, provide important informations about the depositional environment and allow detailed reconstructions of the evolution of paleoclimate, paleoceanic circulation, and paleoproductivity in these areas. The results have significant implications for quantitative models of the mechanisms of climatic change. Furthermore, the data may also help to explain the formation of fossil black shales, i.e., hydrocarbon source rocks. (1) BAFFIN BAY AND LABRADOR SEA The Miocene to Quaternary sediments at Baffin Bay Site 645 are characterized by relatively high organic carbon contents, most of which range from 0.5% to almost 3%. This organic carbon enrichment was mainly controlled by increased supply .of terrigenous organic matter throughout the entire time interval. Two distinct maxima were identified: (i) a middle Miocene maximum, possibly reflecting a dense vegetation cover and fluvial sediment supply from adjacent islands, that decreased during late Miocene and early Pliocene time because of expansion of tundra vegetation due to global climatic deterioration; (ii) a late Pliocene-Pleistocene maximum possibly caused by glacial erosion and meltwater outwash. Significant amounts of marine organic carbon were accumulated in western Baffin Bay during middle Miocene time, indicating higher surface-water productivity (up to about 150 gC m -2 y-l) resulted from the inflow of cold and nutrient-rich Arctic water masses. The decrease in average surface-water productivity to values similar to those of the modern Baffin Bay was recorded during the late Miocene and was probably caused by the development of a seasonal sea-ice cover. At Labrador Sea Sites 646 and 647, organic carbon contents are low varying between 0.10% and 0.75%; the origin of most of the organic matter probably is marine. A major increase in organic carbon accumulation at Site 646 at about 7.2 Ma may indicate increased surface-water productivity triggered by the onset of the cold East-Greeniand Current system. Near 2.4 Ma, i.e., parallel to the development of major Northern Hemisphere Glaciation, accumulation rates of both organic carbon and biogenic opal decreased, suggesting a reduced surface-water productivity because of the development of dosed seasonal sea-ice cover in the northern Labrador Sea. The influence of varying sea-ice cover on surface-water productivity is also documented in the short-term glacial/interglacial fluctuations in organic carbon deposition at Sites 646 and 647. (2) UPWELLING AREAS OFF NORTHWEST AFRICA The upper Pliocene-Quaternary sediments at coastal-upwelling Site 658 are characterized by high organic carbon contents of 4%; the organic matter is a mixture of marine and terrigenous material with a dominance of the marine proportion. The upper Miocene to Quaternary pelagic sediments from close-by non-upwelling Sites 657 and 659, on the other hand, display low organic carbon values of less than 0.5%. Only in turbidites and slumps occasionally intercalated at the latter two sites, high organic carbon values of up to 3% occur. The high accumulation rates of marine organic carbon recorded at Site 658 reflect the high-productivity upwelling environment. Paleoproductivity varies between 100 and 400 gC m "2 y-1 during the past 3.6 m.y. and is clearly triggered by changes in global climate. However, there is no simple relationship between climate and organic carbon supply, i.e., it is not possble to postulate that productivity was generally higher at Site 658 during glacials than during interglacials or vice versa. Changes in the relative importance between upwelling activity (which was increased during glacial intervals) and fluvial nutrient supply (which was increased during interglacial intervals) may have caused the complex productivity record at Site 658. Most of the maximum productivity values, for example, were recorded at peak interglacials and at terminations indicating the importance of local fluvial nutrient supply at Site 658. Near 0.5 Ma, a long-term decrease in paleoproductivity occurs, probably indicating a decrease in fluvial nutrient supply and/or a change in nutrient "content of the upwelled waters. The former explanation is supported by the contemporaneous decrease in terrigenous organic carbon and (river-borne) clay supply suggesting an increase in long-term aridity in the Central Sahara. At Site 660, underneath the Northern Equatorial Divergence Zone, (marine) organic carbon values of up to 1.5% were recorded in upper Pliocene-Quaternary sediments. During the last 2.5 Ma, the glacial sediments are carbonate-lean and enriched in organic carbon probably caused by the influence of a carbonate-dissolving and oxygen-poor deep-water mass. (3) SEA OF JAPAN Based on preliminary results of organic-geochemical investigations, the Miocene to Quaternary sediments from ODP-Sites 798 (Oki Ridge) and 799 (Kita-Yamato-Trough) are characterized by high organic carbon contents of up to 6%; the organic matter is a mixture between marine and terrigenous material. Dominant mechanisms controlling (marine) organic carbon enrichments are probably high-surface water productivity and increased preservations rates under anoxic deep-water conditions. In the lower Pliocene sediments at Site 798 and the Miocene to Quaternary sediments at Site 799, rapid burial of organic carbon in turbidites may have occurred episodically. Distinct cycles of dark laminated sediments with organic carbon values of more than 5% and light bioturbated to homogenous sediments with lower organic carbon contents indicate dramatic shortterm paleoceanographic variations. More detailed records of accumulation rates of marine and terrigenous organic carbon and biogenic opal as well as a detailed oxygen isotope stratigraphy are required for a more precise reconstruction of the environmental history of the Sea of Japan through late Cenozoic time.

Description / Table of Contents: INTRODUCTION The evaporite deposits of the Werra district, especially in the Hattorf mining field, are considered a worldwide unique location for the occurence of numerous basalt dikes and magmatic fluid phases fixed in salt rocks. In spite of the great number of studies dealing with the magmatites in the Werra region, previous investigations have rarely attempted more than a predominantly 'qualitative' description of the basaltic rocks and the effects of volcanism on the evaporites (see Chapter 2). The method of interpreting the mineralogical and chemical composition of the evaporites at the basalt contact is based on previous works (KNIPPING 1984; KNIPPING & HERRMANN 1985). This study should contribute to understanding (i) the mechanism of intrusion of the basaltic rnelts and (ii) the metamorphic processes occurring in the evaporites caused by mobile phases during volcanism. Hence, the following methods were applied: The mineralogical and chemical description of the basaltic rocks with recent nomenclature including the possible differences between individual dikes and between surface- and subsurface-exposed basalts. Seven surface and 48 subsurface exposures at the Hattorf mine of Kali & Salz AG were studied. Application of the most recent knowledge on basalt genesis for interpreting observational and experimental results. Studies on the sulfur and carbon isotope distributions of the native sulfur from several subsurface exposures and the enrichments of gases (predominantly CO2) in the evaporites. Calculation of the spatial and temporal temperature distribution in the evaporite rocks following intrusion of the basaltic melts. For purposes of clarity a few of the terms which will be used frequently here will first be defined: basalt - all of the intrusive rocks studied can be assigned mineralogically and chemically to the basalt family in a broader sense. Thus, the terms basaltic rock or, in short, basalt will be used for these rocks. rock salt - instead of the term salt for halitic rocks the term rock salt is used. Besides, the evaporites are generally designated as host rocks (for the basalt dikes) as well. gases - especially in the German literature the term carbon dioxide or carbonic acid (= Kohlensäure) is frequently used for the gases enclosed in the evaporites of the Werra-Fulda district. ACKERMANN et al (1964) found, in addition to carbon dioxide, considerable amounts of nitrogen and minor amounts of methane. In the following therefore the terms gas mixture or gas will be used. The various basalt dikes found in the Hattorf mining field are described here in terms of their mineralogy and geochemistry for the first time. In doing so it is necessary to number them from east to west. To avoid confusion with older numerations (e.g. SIEMENS 1971) the various dike systems are designated by capital letters (A to P).

Description / Table of Contents: PREFACE The Lower Triassic Buntsandstein in Middle Europe which originated in mainly continental fluvla] environment in the Mid-European Triassic Basin is a famous terrestrial red bed sequence that is discussed in the geological literature since more than 200 years. Much of the earlier work had been devoted to stratigraphical, palaeogeographical and petrographical problemsof the Buntsandstein. The sedimentological analysis and deposltional modelling in the German-type facies, however, is the youngest branch of Buntsandstein investigation and started only a few decades ago. During the last ten years when I began to concentrate on the interpretation of the genesis of the Buntsandstein, much work has been carried out and has already been documented in numerous papers that focussed on various aspects of sedimentology, particularly on reconstruction of fluvial and aeolian depositional mechanisms, significance of palaeosols, importance of fluvial conglomerates, palaeoecology of the fossils, interdisciplinary sedimentology, diagenesis of heavy minerals and origin of the red colour. A summary of the present knowledge in the western part of the German Basin is given in a compilation of regional articles together with general discussions and comparative contributions and especially with an extensive colour photographic documentation in an earlier book (reference on p. 12). In the last few years when more and more material became available not only from the Buntsandstein s. str. (Lower Triassic Scythian) in the Mid-European Triassic Basin, but also from correlative sequences in adjoining areas and even older or younger series of similar facies and origin, it became more and more evident that a synthesis of the state of the art would be necessary, if not inevitably for outlining the general frame and illustrating the diversification of facies associations in numerous temporal and spatial scales. That is why I decided to edit an international proceedings volume on the Buntsandstein which is to compile contributions from many regions and different stratigraphic units with emphasis on various aspects of fluvia] sedi~ntation, but stressing also the importance of the distribution of associated environments such as aeolian dunes and calcrete palaeosols. In spite of my own enthusiasm for the Buntsandstein continental red bed formation (the Lower Triassic red rocks seem to have a very special flavour for being so attractive for me) and regardless of the expansion of my investigations from my original Eife] area (where I learnt how to assess the facies assoCiations in terms of depositional modelling and where I collected an enormous amount of data that served as a valuable base for the production of various case studies which were published during the last years) to several other regions, it was without any doubt that it would not be possible for me alone to finish such an overregional proceedings book within a reasonable time, but that I had to beg various colleagues for their collaboration by writing papers on the Buntsandstein in their investigated areas for this volume. Although the response to my first and second circulars soon showed that it would not be possible to publish a compilation of articles from almost all the studied regions, formations and aspects within a reasonable time with avoiding too much delay of appearance for early contributors, I am very happy that finally many colleagues provided me with papers from almost all the countries in Europe where Buntsandstein is cropping out at the surface. In spite of the tremendous editorial work which was necessary to polish the English, to improve the contents of text and drawings and to put the sequence of papers into a general stream line, I would like to thank all my colleagues who contributed to this volume for their support of the project and particularly for their understanding of my editorial task, especially in case of my frequently serious intervention into their early manuscripts and illustrations. Looking for a publisher in the early stages of planning the volume, I found immediately support by Dr. W. Engel (Department of Geological Sciences of the Springer- Verlag) who generously offered me to take the book into the newly founded series "Lecture Notes in Earth Sciences". From the beginning of organization, writing and editing, I appreciated very much the close cooperation with Dr. Engel who always had an ear for my problems and gave me the necessary freedom to finish the volume along the lines of my intention. Although the preparation of the camera-ready manuscript leaves nearly all the work and responsibility with the author, I am especially grateful to Dr. Engel for his guarantee of almost immediate publication after receipt of the final manuscript which allowed me to polish and incorporate latest ideas up to the very terminal moment. Writing on a subject like the Buntsandstein which has proven to be considerably diversified in terms of sedimentary processes and depositional mechanisms, it became soon apparent that a full discussion along my original intention would easily end up with several thousands of pages in size and would consume much more than a few years. Having already rePeatedly experienced in the past that during course of incorporation of nearly all the relevant literature, the reference l i s t of the final paper is often longer than the whole first draft of the article after one or two years collection of data and ideas, there was no other way than to decide to keep the bibliography short. In order to restrict the book to an economical frame and not to frighten the readership to death, but especially to avoid drowning of the red line through the volume, many contributions had to be written as summary presentations without detailed discussion of the literature. Speaking particularly for the articles that have been written by myself either alone or together with friends, I can assure that this is by no means the result of proud neglectance of other works, but only the necessity of streamlining of the book, and that much of the detailed discussion of comparative examples from the literature has to be done in subsequent special papers. It is impossible to acRnowledge all the people that helped me to arrive at the present goal. Special merits, however, deserve those who stimulated my interest for the Buntsandstein. I am especially indebted to Prof. Dr. G. Fuchs (Landessammlungen fur Naturkunde, Karlsruhe) who proposed me ten years ago to work on the Eifel Buntsandstein for my M.Sc. Thesis, and who later supervised together with Prof. Dr. W. Dachroth (Department of Geology and Palaeontology, University of Heidelberg) the preparation of my Ph.D. Thesis. The good luck of the former to choose the Eifel for me as a starting region (which later proved to have a key position for approaching the evolution of fluvial sedimentation in many other Buntsandstein areas), and the earlier investigations of the latter (although largely unpublished and even only briefly touched in his contribution to this volume) triggered my love of the Buntsandstein which has reached a preliminary climax with the present book. It is my pleasure to dedicate this volume to my two former supervisors with very many thanks for their support and in honour of their merit to have lighted the fire. It is my sincere wish to acknowledge again all the people who contributed with articles to this volume for their help to prepare this summary of the state of the art of Buntsandstein fluvial sedimento]og~y. I also want to sincerely thank all friends and colleagues who supplied ideas and facts in oral or written form and who guided me in the field during course of my comparative investigations that helped me considerably in proceeding with the interpretation of the Buntsandstein. Thanks are also due to Helmut Mader (my father) and Martha Herrmann (my aunt) for their support. I am further indebted to those who have been involved in the various technical aspects of the preparation of the manuscript from the beginning of word processor typesetting of the text and reprography of the illustrations to the final printing. I do hope that the compilation of articles on fluvial aspects of the Buntsandstein in this book will stimulate the interest of many people in the topic of sedimentological modelling of terrestrial red bed sequences and will internationally highlight the position of the Buntsandstein as an extraordinarily attractive case history of fluvial deposition.

Description / Table of Contents: Digital signal processing has become more and more an integral part of observational seismology. While it offers unprecedented power in extracting information from seismic signals, it comes at the price of having to learn a variety of new skills. Dealing with digital seismic data requires at least a basic understanding of digital signal processing. Taking the calculation of true ground motion as the guiding problem, this course covers the basic theory of linear systems, the design and analysis of simple digital filters, the effect of sampling and A/D conversion and an introduction to spectral analysis of digital signals. It contains a number of examples and exercises that can be reproduced using the PITSA software package (Scherbaum and Johnson 1993) or similar programs.

Description / Table of Contents: PREFACE There are problems, when applying statistical inference to the analysis of data, which are not readily solved by the inferential methods of the standard statistical techniques. One example is the computation of confidence intervals for variance components or for functions of variance components. Another example is the statistical inference on the random parameters of the mixed model of the standard statistical techniques or the inference on parameters of nonlinear models. Bayesian analysis gives answers to these problems. The advantage of the Bayesian approach is its conceptual simplicity. It is based on Bayes' theorem only. In general, the posterior distribution for the unknown parameters following from Bayes' theorem can be readily written down. The statistical inference is then solved by this distribution. Often the posterior distribution cannot be integrated analytically. However, this is not a serious drawback, since efficient methods exist for the numerical integration. The results of the standard statistical techniques concerning the linear models can also be derived by the Bayesian inference. These techniques may therefore be considered as special cases of the Bayesian analysis. Thus, the Bayesian inference is more general. Linear models and models closely related to linear models will be assumed for the analysis of the observations which contain the information on the unknown parameters of the models. The models, which are presented, are well suited for a variety of tasks connected with the evaluation of data. When applications are considered, data will be analyzed which have been taken to solve problems of surveying engineering. This does not mean, of course, that the applications are restricted to geodesy. Bayesian statistics may be applied wherever data need to be evaluated, for instance in geophysics. After an introduction the basic concepts of Bayesian inference are presented in Chapter 2. Bayes' theorem is derived and the introduction of prior information for the unknown parameters is discussed. Estimates of the unknown parameters, of confidence regions and the testing of hypotheses are derived and the predictive analysis is treated. Finally techniques for the numerical integration of the integrals are presented which have to be solved for the statistical inference. Chapter 3 introduces models to analyze data for the statistical inference on the unknown parameters and deals with special applications. First the linear model is presented with noninformative and informative priors for the unknown parameters. The agreement with the results of the standard statistical techniques is pointed out. Furthermore, the prediction of data and the linear model not of full rank are discussed. A method for identifying a model is presented and a less sensitive hypothesis test for the standard statistical techniques is derived. The Kalman-Bucy filter for estimating unknown parameters of linear dynamic systems is also given. Nonlinear models are introduced and as an example the fit of a straight line is treated. The resulting posterior distribution for the unknown parameters is analytically not tractable, so that numerical methods have to be applied for the statistical inference. In contrast to the standard statistical techniques, the Bayesian analysis for mixed models does not discriminate between fixed and random parameters, it distinguishes the parameters according to their prior information. The Bayesian inference on the parameters, which correspond to the random parameters of the mixed model of the standard statistical techniques, is therefore readily accomplished. Noninformafive priors of the variance and covariance components are derived for the linear model with unknown variance and covariance components. In addition, informative priors are given. Again, the resulting posterior distributions are analytically not tractable, so that numerical methods have to be applied for the Bayesian inference. The problem of classification is solved by applying the Bayes rule, i.e. the posterior expected loss computed by the predictive density function of the observations is minimized. Robust estimates of the standard statistical techniques, which are maximum likelihood type estimates, the so-called M-estimates, may also be derived by Bayesian inference. But this approach not only leads to the M-estimates, but also any inferential problem for the parameters may be solved. Finally, the reconstruction of digital images is discussed. Numerous methods exist for the analysis of digital images. The Bayesian approach unites some of them and gives them a common theoretical foundation. This is due to the flexibility by which prior information for the unknown parameters can be introduced. It is assumed that the reader has a basic knowledge of the standard statistical techniques. Whenever these results are needed, for easy reference the appropriate page of the book "Parameter Estimation and Hypothesis Testing in Linear Models" by the author (Koch 1988a) is cited. Of course, any other textbook on statistical techniques can serve this purpose. To easily recognize the end of an example or a proof, it is marked by a A or a t~, respectively. I want to thank all colleagues and students who contributed to this book. In particular, I thank Mr. Andreas Busch, Dipl.-Ing., for his suggestions. I also convey my thanks to Mrs. Karin Bauer, who prepared the copy of the book. The assistance of the Springer- Verlag in checking the English text is gratefully acknowledged. The responsibility of errors, of course, remains with the author.

Description / Table of Contents: This volume contains the proceedings of a symposium held at Freiburg im Breisgau, October 7-11, 1990. The symposium was sponsored mainly by the Deutsche Forschungsgemeinschaft (DFG), by the Geological Institute of the University of Freiburg, and by the International Association of Mathematical Geology. We thank these and all other sponsors of the meeting. The symposium whose participants came from more then twenty countries was the first international meeting dedicated entirely to geological applications of threedimensional computer graphics, a rapidly growing field of scientific visualization in geology. The selection of papers in this volume covers a wide range of methods developed in the last decade.

Description / Table of Contents: Cellular growth is an important crystal growth process and offers an interesting example of natural pattern formation. The present work has been undertaken to study cellular growth, especially its pattern formation, both experimentally and numerically. In situ observations of faceted cellular growth clearly revealed cellular interactions in the array of cells. Cell tip splitting and loss of cells were observed to be the two main mechanisms for the adjustment of cell spacings during growth. For the first time, the true time-dependent faceted cellular growth has been modelled properly. The time evolution of faceted cellular growth has demonstrated the dynamical features of cellular growth processes. It was shown that the pattern formation was determined by cellular interactions in the array, either transient or persistent depending on the growth condition. The cellular structures were irregular when persistent interactions occurred, whereas relatively regular structures could be formed once the transient interactions had stopped. As a result of cellular interactions, a finite range of stable cell spacings was found under a given growth condition. Numerical experiments were carried out for k 〉 1 and k 〈 1 (where k is the solute partition coefficient), under a number of different growth conditions. It was found that these two cases were not symmetric as far as solute distribution is concerned; however the pattern formation behaviours were similar. For k 〉 1 shallow cells were retained, while for k 〈 1, the formation of liquid grooves along the cell boundary depended on the growth condition. The solute effect plays an important role in the cellular interactions in the array. The results were compared with experimental observations in thin film silicon single crystals. It is felt that a general behaviour of pattern formation is found and should be expected for other processes such as non-faceted cellular or eutectic growth. In addition, the solute flow in steady state cellular array growth was studied using the point source technique. Preliminary work was carried out to measure steady state non-faceted cell shapes. Heat flow in zone melting was studied numerically.

Description / Table of Contents: INTRODUCTION Sediments are increasingly recognized as both a carrier and a possible source of contaminants in aquatic systems, and these materials may also affect groundwater quality and agricultural products when disposed on land. Contaminants are not necessarily fixed permanently by the sediment, but may be recycled via biological and chemical agents both within the sedimentary compartment and the water column. Bioaccumulation and food chain transfer may be strongly affected by sediment-associated proportions of pollutants. Benthic organisms, in particular, have direct contact with sediment, and the contaminant level in the sediment may have greater impact on their survival than do aqueous concentrations. Following the findings of positive correlations between liver lesions in English Sole and concentrations of certain aromatic hydrocarbons in Puget Sound (Washington) sediment, it can be suspected that such substrates may also be responsible for a host of other serious and presently unrecognized changes at both the organismal and ecosystem levels (Malins et al., 1984). Modern research on particle-bound contaminants probably originated with the idea that sediments reflect the biological, chemical and physical conditions in a water body (Züllig, 1956). Based on this concept the historical evolution of limnological parameters could be traced back from the study of vertical sediment profiles. In fact, already early in this century Nipkow (1920) suggested that the alternative sequence of layers in a sediment core from Lake Zürich might be related to variations in the trophic status of the lake system. During the following decades of limnological research on eutrophication problems sediment aspects were playing only a marginal role, until it was recognized that recycling from bottom deposits can be a significant factor in the nutrient budget of an aquatic system. Similarly, in the next global environmental issue, the acidification of inland waters sediment-related research only became gradually involved. Here too, it is now accepted that particle-interactions can affect aquatic ecosystems, e.g. by enhancing the mobility of toxic metals. In contrast to the eutrophication and acidification problems, research on toxic chemicals has included sediments aspects from its beginning: Artificial radionuclides in the Columbia and Clinch Rivers in the early sixties (Sayre et al., 1963); in the late sixties heavy metals in the Rhine River system (De Groot, 1966) and methyl mercury (Jensen & Jerne- 16v, 1967) at Minamata Bay in Japan, in Swedish lakes, in Alpine Lakes, Laurentian Great Lakes and in the Wabigoon River system in Canada; organochlorine insecticides and PCBs in Lakes St. Clair and Erie during the seventies (Frank et al., 1977); chlorobenzenes and TCDDs in the Niagara River system and Lake Ontario in the early eighties (Oliver & Nicol, 1982; Smith et al., 1983). In the present lecture notes, following the description of priority pollutants related to sedimentary phases (Chapter 2), four aspects will be covered, which in an overlapping succession also reflect the development of knowledge in particle-associated pollutants during the past twenty-five years: - the identification, surveillance, monitoring and control of sources and distribution of pollutants (Chapter 3); - the evaluation of solid/solution relations of contaminants in surface waters (Chapter 4); - the study of in-situ processes and mechanisms in pollutant transfer in various compartments of the aquatic ecosystems (Chapter 5);- The assessment of the envlroD-mental impact of particle-bound contaminants, i.e. the development of sediment quality criteria (Chapter 6). A final chapter will focus on practical aspects with contaminated sediments. Available technologies will be described as well as future perspectives for the management of dredged materials. Here too, validity of remedial measures can only be assessed by integrated, multidisciplinary research. In the view of the growing information on the present subject and owing to the limitations in the framework of this monography, the reader is referred to additional selected bibliography, which is attached at the end of this Chapter i. Additional information on the more recent publications on contaminated sediments is given in the annual review volume of the Journal of the Water Pollution Control Federation, June edition.

Description / Table of Contents: The present interest in sediments which are rich in organic matter results not only from their economic significance as potential oil and gas source rocks, but also from the fact that their deposition is the result of special environments. Subtle changes in the environmental conditions may result in great variations in the geochemical and petrographical characteristics of the organic matter. Therefore, the study of organic matter-rich sediments can provide a key to past sedimentary conditions. In addition, the elucidation of the depositional controls is of importance for oil and gas exploration strategies, for which the knowledge of source rock distribution and quality is critical. Furthermore, organic matter reacts extremely sensitive to changes in temperature during burial. The result of this sensitivity is the generation of volatile products such as carbon dioxide, water, nitrogen, oil and gas and a reorganization of the solid organic residue. Some of these changes are quantified as maturity parameters which can be used as calibration tools in basin modelling, i.e., in the modelling of temperature histories of sedimentary basins. The use of maturity parameters and other organic matter characteristics as indicators for diagenetic conditions and depositional processes is, however, restricted, if analyses are performed on outcrop samples, because weathering also affects organic matter.

Description / Table of Contents: Biolaminated deposits, produced by microbial communities, were studied in modern peritidal environments and in the rock record. The term microbial, mat refers to modern, the term stromatolite to ancient analogs. The term biolaminated deposits was used to encompass both microbial mats and stromatolites. Microbial mat environments studied are the Gavish Sabkha, the Solar Lake, both hypersaline back-barrier systems at the Gulf of Aqaba, Sinai Peninsula, and the "Farbstreifen-Sandwatt" (versicolored sandy tidal flats) on Mellum, an island in the estuary embayment of the southern North Sea coast. Three facies-relevant categories were distinguished: (i) the mat-forming microbiota, (2) environmental conditions controlling mat types and lithology, (3) bioturbation and grazing. Cyanobacteria account for biogenic sediment accretion in all cases studied. Three major groups occur: filamentous cyanobacteria, coccoid unicells with binary fission and those with multiple fission. In the presence of these groups the following mat types evolve: (i) continuously flat (stratiform) L~-laminae (occur in all environments studied); (2) translucent, vertically extended Lv-laminae (only Gavish Sabkha and Solar Lake); (3) nodular granules (only Gavish Sabkha). Basically, the development of mats is controlled by moisture. Thus high-lying parts where the groundwater table runs more than 40 cm below surface are bare of mats. These are: The circular slope and elevated center of the Gavish Sabkha, the shorelines of the Solar Lake and the episodically flooded upper supratidal zone of Mellum Island. The following situations of water supply were found to stimulate mat growth: (i) Capillary movement of groundwater to exposed surfaces, (2) shallowest calm water, both realized in the Gavish Sabkha and the Solar Lake. On Mellum Island, mats form in the lower supratidal zone, which is flooded in the spring tide cycle and wetted during low tide by capillary groundwater. Salinity is almost that of normal seawater, whereas in the Solar Lake, it ranges from 45 °/oo to 180 °/oo and in the Gavish Sabkha, it reaches more than 300 °/oo. Salinity increase is correlated with rising concentrations of magnesium and sulfate ions. In the Gavish Sabkha, episodic sheetfloods cause high-rate sedimentation which is accidental to the living mats. Episodic low-rate sedimentation stimulates the mats to grow through the freshly deposited sediment layer. This occurs predominantly on Mellum Island due to eolian transport. Within the Gavish Sabkha, mineralogy of sediments, community structures, standing crops, redox potentials and pH are highly correlative to the increasing evenness in moisture supply which is realized by the inclination of the system below mean sea level. These conditions bring about a lateral sequence of facies types which include (I) siliciclastic biolaminites at the coastal bar base, (2) nodular to biolaminoid carbonates at saline mud flats, (3) regularly stratified stromatolitic carbonates with ooids and oncoids within the hypersaline lagoon, (4) biolaminated sulfate towardthe elevated center. High-magnesium calcite in facies type 3 precipitates around decaying organic matter and forms also the ooids and oncoids. These occur predominantly within hydroplastic Lv-laminae which provide numerous nucleation centers. Within the Solar Lake, facies type 3 (stromatolitic carbonates with ooids and oncoids) is most important, and grows to extraordinary thickness at the lake's shelf. The regular alternation of dark and light laminae results from seasonally oscillating water depths. These conditions couple back over changing light and salinity intensities to changing dominance structures of mat-building communities. Increasing salinity correlates with decreasing water depth and accounts for the relative abundance of coccoid unicells and diatoms, both active producers of extracellular slimes (Lv-laminae). Water depths locally or temporarily increased favor surface colonization by Mic~ocoleu8 chthonoplastes (Lh-laminae). The biolaminated deposits of the versicolored tidal flats on Mellum Island are similar to facies type 1 of the Gavish Sabkha (siliciclastic biolaminites). Differences exist in the lithology: Sediments upon or through which the mats on Mellum Island grow are made up of clean sand. The grains originate predominantly from re-worked glacial sediments and are rounded to well rounded. By contrast, the strong angularity of siliciclastic grains in the Gavish Sabkha clearly shows their status as primary weathering products. In all environments studied, insects play a significant role. Mainly salt beetles contribute to the lebensspuren spectrum. There is no indication that burrowing and grazing beetles and dipterans are detrimental to the growing mat systems. According to the marine fauna, two distributional barriers exist: (i) physical and (2) biogeochemical factors. Physical barriers are (a) hypersalinity and barrier-closing, which restrict the marine fauna in the Gavish Sabkha and the Solar Lake to a few species, mainly meiofaunal elements such as ostracods and copepods. Only in the Gavish Sabkha, one marine gastropod species occurs which colonizes mud flats of lower salinity. A salinity barrier of about 70 °/oo separates the gastropod habitats from the zones of growing mats. Under reduced salinity, the snails are able to destroy the microbial mats completely. (b) Decreasing regularity of flooding in the microbial mat environment of Mellum Island excludes intertidal deformative burrowers such as cockles and lugworms. However, locally the mats are pierced by numerous dwelling traces. These stem from small polychaetes and amphipod crustaceans which are able to spread over the intertidal-supratidal boundary and settle up to the MHWS-Ievel. Biogeochemical barriers are oxygen depletion within the sediments, high ammonia and sulfide contents, which generate through bacterial break-down of organic matter. Within the highly productive mats of Mic~ocoleu8 chthonoplastes on Mellum Island, dwelling traces of marine polychaetes and amphipod crustaceans disappear due to these conditions. The name of the mat-forming species, Microcoleus chthonoplastes, indicates its capacity to form "soils" (Greek chthonos). While lithology is not altered, the presence of Mic~ocoleu8 mats leads to a habitat change which excludes trace-making "arenophile" invertebrate species and favors "chthonophile" species which do not leave traces. Stromatolitic microstructures studied in rock specimens were interpreted using modern analogs: Microcolumnar buildups in Precambrian stromatolites, ooids and oncoids were compared with those of modern microbial mats. The nodular to biolaminoid facies type found in the Gavish Sabkha was suggested to be an analog to the Plattendolomite facies of Permian Zechstein, North Poland. Studies of the Lower Jurassic ironstone of Lorraine clearly indicate that fungi have been involved in the formation of stromatolites, ooids and oncoids. In conclusion, the comparative study of microstructures in microbial mats and stromatolites reveals a better understanding in both fields. In many cases, it was geology which first revealed the similarity of recent forms to those ancient ones and consequently encouraged research into them.

Description / Table of Contents: PREFACE The aim of this volume is two-fold. At the more pragmatic level, it is to help answer the many questions about the structure of the Pacific continental margin of North America, which have arisen over the years as a result of continuing field mapping and geophysical surveys. The second objective is methodological - to illustrate the irreplaceable role of geological information among the various data sets used in earth-science studies. The need to address these issues became apparent to the author during the several years he spent taking part in geological and geophysical studies on the west coast of Canada. All too often, results of geologic field mapping disagreed with tectonic predictions from too-straightforward local applications of global plate reconstructions, which due to their generality do not always take a full account of specific character of particular regions. To be sure, the global approach has during the last q~/artercentury greatly expanded the vision of geoscientists, previously restricted to continental regions. However, a negative by-product of this expansion has been a decline of attention paid to local information, as tectonic studies have increasingly relied on simply fitting the development of a particular region into this or that prefabricated tectonic template. Direct geological observations have limitations of their own. The observer in most cases deals with products of geologic processes, rather than with the processes themselves. Field mapping provides local information, and many years of effort are needed before a regional overview becomes possible. Geologic mapping is restricted to the ground surface, and even the deepest drillholes cannot sample more than the outermost shell of the Earth. The factual side of geologic mapping is usually limited to determination of rock types and their relationships in areas of exposure. Conclusions about the three-dimensional structure of a region and its evolution are still mostly inferential. Broad incorporation into geological studies of geophysical data, assisted by ever-more-sophisticated modern computers, provides a huge volume of information unobtainable in other ways. Geophysical methods quickly afford regional coverage or images of the Earth's deep interior. Geophysical methods have prompted the application in geological sciences of methodologies borrowed from exact sciences, such as mathematics and physics. Particularly important has been quantitative modeling, which allows a scientist to use the known parameters of a system to predict others. But in taking this approach too far, one encounters a dangerous pitfall. A model is a simplified representation of a natural phenomenon. The quality of this or that representation is relative, and a representation is never perfect. To incorporate all characteristics of a geologic phenomenon, in a parametrized form, into a numerical or physical imitation is impossible. This requires one to rely on simplifying assumptions, and a model is no better than the assumptions at its base. Unrealistic assumptions lead to unrealistic models. When a disagreement arises between model predictions and observations - such as those from geologic field mapping - a modeler may be tempted to downplay the differences or the significance of the offending observations. It becomes tempting to underestimate the role of an experienced geologist as a principal arbiter of the realism of a model. But it is geological data and geological control that provide the ultimate means of testing abstract models. From this methodological position, the present study of the western North American continental margin is organized as follows: 1. Geological information, available from field mapping and drilling, is gathered and summarized. 2. Current geophysical models for this region are considered, with particular attention to their underlying assumptions. 3. The available data, geological and geophysical, are synthesized into an internally consistent geologic-evolution concept. 4. This concept is tested by comparison with direct geological observations from field mapping and drilling. Because most current data sets and models cover northwestern Washington and western British Columbia, particular attention was paid to these areas. Fortunately, these areas contain many keys that help understand the structure of the entire western North American continental margin, which has baffled scientists for decades. The author does not claim to have resolved all these problems, but he does believe he has made a useful contribution to understanding continental-oceanic plate interrelations at this continental margin. Rigidity of lithospheric plates is a critical assumption in current models of plate evolution. The lithophere of a plate is created at spreading centers manifested in the global system of mid-ocean ridges. It moves away from the place of its birth towards boundaries with other plates, with which it can interact in a variety of ways. Some interactions are of strike-slip type, with two plates simply sliding past each other. However, to compensate for the creation of new lithosphere at spreading centers, older lithosphere at some plate boundaries descends into the mantle as it is overriden by other plates. At such plate boundaries lie subduction zones. If both regimes occur along a single plate boundary, the transition between them must be abrupt. Unless it can be tied to a change in orientation of the boundary, it must be associated with a junction of not two, but three different plates. Such a template was used to interpret the structure and tectonic evolution of the western North American continental margin in the late 1960s and thereafter (Atwater, 1970; McManus et al., 1972; Barr and Chase, 1974; Riddihough and Hyndman, 1976). To satisfy the principles of rigid-plate tectonics, both regimes have to exist along this continental margin. Also needed in rigid-plate reconstructions is a plate triple junction somewhere between the areas of proven ongoing subduction (in Oregon and southern Washington) and transform plate motion (along the southeastern Alaska margin; Atwater, 1970; McManus et al., 1972). Such a triple junction has been placed off Queen Charlotte Sound offshore British Columbia (Keen and Hyndman, 1979; Riddihough et al., 1983), where a spreading center has been postulated between the Pacific and Explorer oceanic plates (Hyndman et al. 1979; Riddihough, 1984). Off northern Vancouver Island, a transform boundary between the Explorer and Juan de Fuca oceanic plates has been postulated, but both these plates are assumed to be subducting beneath Vancouver Island (Hyndman et al., 1979; Riddihough and Hyndman, 1989)o With the assumed universality of the rigid-plate model, "broad similarity" has been suggested between the geology of western Oregon and that of western British Columbia, and the Cascadia zone of active subduction has been extended as far north as the mouth of Queen Charlotte Sound (Riddihough, 1979, 1984). An accretionary sedimentary prism (Yorath, 1980) - or even an accretionary complex containing several exotic "terranes" (Davis and Hyndman, 1989) - has been postulated off Vancouver Island. Geological observations onshore and offshore (Shouldice, 1971; Tiffin et al., 1972) have come to be considered too "surficial" to be of major consequence for large-scale tectonic modeling (Yorath et al., 1985a,b; Yorath, 1987). Variants of the principal geophysical model for this area during the last decade (Clowes et al., 1987; Hyndman et alo, 1990; Spence et al. 1991; Yuan et al., 1992; Dehler and Clowes, 1992) have become increasingly distant from geological observations. As new model variants emerged, they were checked for internal consistency, compatibility with neighboring local models and fidelity to the overall assumed tectonic picture. However, detailed geological work continued, and many of its results proved incompatible with the conventional wisdom (Gehrels, 1990; Babcock et al., 1992, 1994; Allan et al., 1993; Lyatsky, 1993a). Importantly, questions arose about the applicability in this region of the conventional, simple rigid-plate assumption, as it was shown to be unable to account for all the geological and geophysical peculiarities in some areas (Carbotte et al., 1989; Allan et al., 1993; Davis and Currie, 1993). New solutions were made necessary by new findings and by rediscovery of forgotten old data (see Lyatsky et al., 1991; Lyatsky, 1993b). Without aiming to resolve all the outstanding debates, tectonic implications of the geologic mapping and drilling results in this region are considered in the following chapters. These results are integrated with geochemical and geophysical data. Interpretations of these data, made by this author and by other workers, are verified by geological observations and by geologically plausible extrapolations from these observations. In searching for solutions consistent with all the information, the author has restricted himself to analyzing continental-crust structures along this continental margin. He believes, however, that future models for the offshore regions of the northeastern Pacific should consider the results obtained herein.

Description / Table of Contents: PREFACE It is increasingly necessary to develop industrial and hydraulic engineering constructions under unfavourable geological or geotechnical conditions. Furthermore, it becomes more and more important to build effectively and economically and to find optimal solutions for a long-term steady function of the constructions. This emphatically demands exhaustive information on the structural situations and engineering parameters of local site assessments by areal investigations of the sites and the petrophysical parameters in situ. This requires, however, the use of geophysical techniques. During the last two or three decades international applied geophysics has systematically developed new possibilities for site investigations for the determination of petrophysical parameters in situ as well as for observation of the system building and site. As in "New techniques in engineering", geophysical methods make it possible to develop areal models of subsurface conditions of building sites, to quantify relevant engineering parameters in situ, as well as to analyze the longterm behaviour of the buildings, which are influenced by internal or external factors. With regard to the broad spectrum of applied geophysics, there are few methods, that especially favour application in engineering and groundwater studies. These methods are distinguished by a relatively simple measuring technique and good measuring progress, e.g. the geoelectrical self-potential method, the geoelectrical resistivity method as well as a newly developed devices for geothermic measurements. There exist numerous publications, broadly scattered in the technical literature, concerning the theoretical bases and applications of these methods, but until now, there have been only a few meetings to exchange experience and results on an international level. This was the aim of the symposium "Detection of Subsurface Flow Phenomena by Self-Potential/Geoelectrical and Thermometric Methods", held in Karlsruhe from 14-18 March 1988. An outstanding part of the symposioum was represented by the results of a research project, coordinated by the University of Karlsruhe (Department of Geology and Institute of Soil and Rock Mechanics) and the Federal Waterway Engineering and Research Institute (BAW), Karlsruhe. Regarding the subject "Experiments to ascertain the relations between hydraulic potentials in the underground and the geoelectrical and thermic potentials set off by these", the research work took four years. The project was sponsered by the Volkswagen Foundation/Hannover. The goal was to develop and test objective techniques for detecting leakages in dams, locating, demarcating and designating quantitatively inhomogeneous spheres in dams with the aim of detecting damage and subsurface flow phenomena as soon as possible. The symposium consisted of a three-day lecture meeting with about 40 papers and a summarizing respectively closing roundtable discussion, a visit to the laboratories and to the in situ constructions within the area of BAW developed in the frame of the research project. This included a technical excursion to the Rhine-Staustufe Iffezheim with its very impressive waterway constructions and an excursion to the Geophysical Observatory near Schiltach (Black Forest). The Observatory belongs to the Universities of Karlsruhe and Stuttgart. Approximately 80 scientists from 15 countries participated the symposium. They were welcomed by the Rector of the University, Professor Dr. A. Kunle and the representative of the Federal Ministry of Traffic, Dr. G. Schröder. Professor Dr. H. Hötzl elucidated the scientific problems and the economical importance of the project as a speaker of the research group. The following papers dealt with the fundamental aspects of geoelectrical and thermometric measurements, with the theory of these methods, the state and developing ter~dencies concerning devices, data acquisition, processing and interpretation as well as noise effects. It became clear that the solution of the complex scientific-technical problems of waterway constructions and environmental protection requires broad, interdisciplinary cooperation and international collaboration. Thus it would be possible to minimize the personnel, temporal and economic efforts. The intended cooperation of geoscientists, engineering geologists, building engineers and representatives of other disciplines make it possible, not only to exchange experiences and results relating to international problems unsolved until now, but also to determine new guidelines with regard to the scientific organization of further investigations. Thus in order to inform all interested parties of the main topics of the symposium and to advance international cooperation in the future, the present review includes a part of the papers and reports of the excursions recommended by the participants of the meeting, which have been divided into the following topics: - Introduction to engineering-geophysical problems and attempts at their solution; - Geoelectrical self-potential measurements; - Geoelectrical resistivity measurements; - Geothermic measurements; - Case histories; - Some topics of the roundtable discussion; - Reports concerning the excursions. The editors wish to thank very much all those, who contributed to the success of the symposium and to the publication of the present report. Finally they venture the note, that the authors theirselves are responsible for the content of their papers.

Description / Table of Contents: The study of calcareous bedding rhythms has become an important field in Geology. Often these bedding rhythms are simply interpreted as representations of primary climatic cycles without showing the effects of any appreciable diagenetic overprinting. This study, however, deals predominantly with the diagenetic processes which are usually large and affect both the amplitude and rhythm of carbonate oscillations. The purpose of this textbook is two fold. First, it intends to provide a better understanding of the processes of diagenetic bedding. Secondly, this new approach allows one to quantify and to understand diagenesis in terms of mass exchanges. This is possible through the development of methods which combine chemical data with compaction measurements. These methods can be also used independent of the marl-limestone alternation problem.

Description / Table of Contents: PREFACE This monograph is a compendium of revised papers which were originally presented at the "Ron Mather Symposium on Four-Dimensional Geodesy", 28-31 March, 1989, held at the University of New South Wales, Sydney, Australia. The symposium had the enthusiastic support of the International Association of Geodesy and the Australian Academy of Sciences. The symposium served two purposes: to honour the achievements of the late Professor Ron S. Mather, the distinguished Australian geodesist who died in 1978, and to review and report on the latest developments in four-dimensional geodesy. Four-dimensional geodesy is a convenient term for those geodetic principles and techniques which yield position, gravity and their time variations. In the past geodesists have tended to think of the earth as a static body, save from occasional savage earthquakes or volcanic eruptions. So, why the need to coin the term "four-dimensional geodesy") Because it explicitly recognises that time is an integral part of understanding geodetic measurements. But let's first identify the scope of modern geodesy. Geodesy has traditionally been concerned with two separate, though closely related, topics: accurate positioning of objects on the earth's surface, and mapping the earth's external gravity field. These are still the fundamental tasks of geodesy, although the spheres of application have now extended into space. However, present and emerging geodetic measurement technologies for gravity field mapping and positioning are sensitive to defolTnations of the earth's surface and gravity field. Within the geodetic community, this new emphasis on accounting for the time-varying characteristics of position and gravity has fundamental principles; in particular the establishment and maintenance of appropriate global reference systems for geodesy. At the same time, there has been a growing recognition by the earth sciences in general of the important role of geodesy in studying earth deformations, as well as atmosphere and ocean dynamic phenomena. The geodetic measurements, for example, are taken over time scales of hours to decades, and occasionally to a century or longer. Though this is only a small part of the whole deformation spectrum, it is a very important one. Geodesy bridges the low frequency part of the spectrum available from geological observations, with the high frequency end observed from, for example, seismic instrumentation. It's role in atmospheric and oceanographic studies is as a unique, high precision remote sensing tool. The revolution in geodesy is not, however, restricted to the measurement technology only. It is true that without the advances of space geodesy and terrestrial metrology, the notion of four-dimensional geodesy is a rather academic one. These advances, which now reveal time-variable signals above the measurement noise level, have important implications for all geodetic activities. The geodetic activities we refer to can be identified as: experiment design and measurement processes; definition and maintenance of highly stabie geodetic reference systems; data analysis; and interpretation of position and gravity results. Ultra high precision measurements are of little use without sophisticated analysis tools to extract the small signals in the data. The interpretation of geodetic results will be in error if insufficient attention is paid to ensuring that the reference systems to which the results relate are themselves stable. Clearly four-dimensional geodesy is as much about concepts and principles, as about computers and geodetic equipment. This diversity is reflected in the papers selected for this book. They range over topics related to the modem measurement tools, the reduction and analysis techniques, to the interpretation of geodetic results within the context of problems currently being investigated in the earth sciences. We would like to thank the International Association of Geodesy and the Australian Academy of Sciences for sponsorship of the Symposium. Unisearch Ltd., the commercial arm of the University of New South Wales, was the managing agent, and staff members of the School of Surveying and of Unisearch Ltd. were involved in the organisation of the Symposium. We would like to gratefully acknowledge these excellent contributions. Let us express also our gratitude for the useful guidance which we received from Prof. K. Lambeck, A. Prof. A. Stolz and Dr. R. Coleman of the Scientific Advisory Committee and the continuous support given by Prof. E.W. Grafarend. Sincere thanks are due to the authors of the selected papers for agreeing to contribute to this Monograph, and for their positive cooperation during the production of this volume.

Description / Table of Contents: INTRODUCTION Ecometry concerns measurements and interpretation of ecological data and relationships between data. It deals with most matters involved in the scientific aspects of the representativity and information value of samples and does not, in fact, concern statistical methods. In particular, ecometry can be regarded as an approach to obtain so-called load models and load diagrammes (effect-dose-sensitivity diagrammes), which are one of the aims/final products in aquatic environmental consequence analysis (H~- kanson, 1990; all these terms will be explained later on). This publication is meant to demonstrate what can and cannot be done using ecometric approaches. It must be emphasized at the outset that the main intention here is not to provide new radioecological knowledge on how Cs-137 is dispersed in aquatic ecosystems after the Chernobyl accident and is taken up in fish, but to use Cs-137 as a type substance and pike as a biological indicator to go through methods which should also apply to other types of environmentally hazardous substances (it could just as well have been substance X in ecosystem Y). As a secondary effect, we may also learn something about Cs-137. Several terms and methods, which have not been used earlier in the aquatic environmental sciences, e.g., ecometric analysis and dynamic modelling using moderators, will be discussed and defined...

Description / Table of Contents: PREFACE This volume contains a selection of papers presented and discussed at the COMTAGWorkshop on "Dynamics and Geomorphology of Mountain Rivers". COMTAG (Commission on Theory, Measurement and Application in Geomorphology) is a commission of the International Geographical Union (IGU). The meeting was held in the monastery of Benediktbeuern in the Bavarian Alps in June 1992. The main objective of the meeting was to review the most recent developments in research on river bed dynamics and bedload transport in mountain rivers. Questions of mountain torrent control and environmental protection were also addressed. The general theme of the meeting finds its appropriate scientific and spatial location in the long tradition of bedload transport studies carried out in the fluvially active German Alps, which are often affected by flood and mass movement hazards. The conference provided an impulse for discussions between researchers in the fields of mountain torrent hydrology, water resources management and bedload transport modelling. In the five years preceding the meeting the editors of this volume had headed a DFG (Deutsche Forschungsgemeinschaft) project on "Bedload transport and river bed adjustment in the Lainbach catchment" within the priority programme "Fluvial Geomorphodynamics in the late Quaternary". Results of the investigations and newly developed measurement techniques were introduced to the participants during the meeting and an excursion to the nearby Lainbach River. The meeting was attended by sixty four scientists from fifteen countries. Thirty four papers were presented in sessions on bedload transport in mountain torrents, measurement techniques of solid material transport, mass movements and sediment supply, river bed adjustment and roughness characteristics of steep mountain torrents, models of bedload transport, and catastrophic flooding. From a regional perspective the majority of the contributions dealt with the Alps with a special focus on investigations carried out at the northern fringe of the Alps. Most of the papers presented were submitted for publication, and selected papers have been included in this volume. The workshop was financially supported by the Deutsche Forschungsgemeinschaft, the Commission of the European Communities (Directorate General for Science, Research and Development), the Freistaat Bayern (Ministerium fOr Unterricht, Kultur, Wissenschaft und Kunst) and the US-Army Research and Development Standardization Group. The participants and the organizers are grateful for these grants. We thank the president of COMTAG, Asher Schick, for his friendly support during the preparation and organization of the workshop. We are also very much indebted to the Kathoiische Stiftungsfachhochschule M~nchen and the Salesianer Don Bo~cos, Benediktbeuern, who opened the rooms of the monastery of Benedikbeuern for scientific sessions and social events during the conference. The organization of the meeting would not have been possible without the help of the local and regional administration, water and forest authorities. We highly appreciate this assistance. In addition, the editors thank the Springer-Verlag for the inclusion of the conference proceedings in this series and the colleagues F. Ahnert, J. Bathurst, W. Bechteler, I. Campbell, P. Carling, N.J. Clifford, S. Custer, T. Davies, A. Dittrich, R. Ferguson, K. Garleff, M. Hassan, R. Hey, H. Ibbeken, J. Karte, H. Keller, D. Knighton, J. Laronne, M. Meunier, M.D. Newson, D. Oostwoud-Wijdenes, I. Reed, K.S.Richards, A. Scheidegger and W. Symader for their valuable contributions as reviewers of the manuscripts that were submitted for this volume.

Description / Table of Contents: INTRODUCTION Evaporites may form in a spectrum of environments from continental sabkha (playa) to deep basins (see Kendall 1978 a, b, Schreiber 1978, 1986, Friedman and Krumbein 1985, for review). In the last two decades, many ancient evaporite basins have been interpreted using the sabkha model and the deep desiccated basin model, the former not excluding the latter. However, growing evidence has been gathered indicating that most evaporites are formed in subaqueous environments, so that it cannot be reasonably expected that one depositional model alone will explain the entire basin fill. The chapters in this volume discuss characteristic examples of evaporite basins, mostly of moderate size. Aspects of a saline giant, the Zechstein basin of Central and NW Europe, have been considered in Volume 10 of "Lecture Notes in Earth Sciences"...

Description / Table of Contents: PREFACE During the so-called Mid-Cretaceous interval, approximately 100 million years ago, the earth experienced a dynamic phase in its geologic history. Enhanced global tectonic activity resulted in a major rearrangment of the continental plates; accelerated spreading rates induced a first-order sea level highstand; intense off-ridge volcanism contributed to a modeled high atmospheric CO 2 rate; climatic conditions fluctuated; and major changes occurred in biologic evolutionary patterns. With the initiation of a gradual change from an equatorial, east-west directed current-circulation pattern to a regime, dominated by south-north and north-south directed current systems, the earth's internal clock was set for Cenozoic, "modern" times. The Mid-Cretaceous dynamic phase is recorded in a suite of sediments of remarkable similarity around the globe. Shallow-water carbonate platforms drowned on a global scale; widespread sediment-starved, glauconite and phosphate- rich sequences developed; and consequently, pelagic sedimentary regimes "invaded" shelf and epicontinental sea areas. This typical "deepening-upward" pattern is well-documented in Mid-Cretaceous sequences along the northern Tethys margin. Shallow-water carbonates are overlain by condensed glauconitic and phosphatic sediments, which, in turn, are blanketed by pelagic carbonates. In this volume, the example of the western Austrian helvetic Alps, built up of inner and outer shelf sediments deposited along the northern Tethys margin, is used to elucidate the paleoceanographic conditions, under which the Mid-Cretaceous triad of platform carbonates, condensed phosphatic and glauconitic sediments, and pelagic carbonates was formed. In the first part, the evolution of this sequence is traced from the demise of the platform (Aptian) to the return of detritus-dominated deposition (Upper Santonian). The second part includes a discussion of the reconstructed paleoceanographic and tectonic variables, their possible interaction, as well as their influence on sediment properties during this period. Special attention is paid to (1) subsidence behavior of the inner, platform-based shelf and the outer shelf beyond the platform, (2) ammonoid paleobiogeography, (3) the northern tethyan current system and its impact on sediment patterns, (4) the influence of an oxygen minimum zone, (5) sediment bypassing mechanisms on the inner shelf, (6) condensation processes, (7) phosphogenesis, (8) relative sea level changes, (9) genesis and the development of unconformities, (10) tectonic phases and their impact on sediment configuration, (11) drowning of the shallow-water carbonate platform, and (12) "asymmetric" sedimentary cycles. The detailed reconstruction of the development of sedimentary patterns both in time and space in this particular area, and its environmental interpretation, given in this volume, may serve as a contribution to a better understanding of the Mid-Cretaceous dynamic phase in earth's history...

Description / Table of Contents: PREFACE Following the economical and social development of the local communities, mountain regions of temperate climates are increasingly becoming the site of valuable infrastructures and important urban and industrial settlements. As the catastrophic events of last years in the European Alps have clearly shown, the vulnerability of these territories has correspondingly increased, in terms of both property damage and losses of human life. Until recently, the hydraulic scientific community has paid little attention to mountain watersheds, except perhaps during the period if the hydropower development. Nevertheless attention was then focused on problems and methodologies somewhat different from the issues of actual environmental concern. More recently, however, hydraulic engineers have joined their colleagues from forest and rural engineering, who have traditionally dealt with erosion control in mountain areas, to bring in their own methodology, already experienced in lowland rivers. At the same time, academic people focused an interest in some phenomena, like massive transport, which is typical of mountain environment. To bring together all these contributions and to make the state of the art of the mountain river science (oropotamology) and technology, an International Workshop was called at the University of Trent (Italy), on October 1989, under the sponsorship of Fluvial Hydraulic Section of the IAHR. Three main topics have been recognized as particularly relevant from the point of view of both research and professivnal people: a) Hydrodynamics of steep channels and local scale process; b) Sediment movement and sediment training, with special emphasis on massive transport; c) Particular features of sediment transport related to non-uniform grain-size. However, as it is the case in these circumstances, the contest of several contributions often spread over more than one topic. In the following Introduction to papers, the three topics were split into 11 Sections, each one devoted to a more particular aspect recurrently addressed during the discussion. The same paper, thus, may be mentioned in different Sections of the Introduction.

Description / Table of Contents: This book is the collection of the Lecture Notes of an International Summer School of Theoretical Geodesy held in Assisi (Italy) from May 23 to June 3 -1988.

Description / Table of Contents: INTRODUCTION The International Summer School of Theoretical Geodesy on Satellite Altimetry in Geodesy and Oceanography was held in Trieste (Italy) from May 25 to June 6, igg2. It was organized by Prof. R. Rummel of the Delft University of Technology and by Prof. F. Sansò of the Politecnico di Milano and was attended by 63 participants and 7 lecturers from 17 countries. The School was hosted by the International Centre of Theoretical Physics of Trieste. Satellite altimetry provides a lot of data that require more and more sophisticated models in order to be interpreted and exploited. One of the main problems related to the practical treatment of the data can be summarized as follows: oceanographers would like to ask geodesists to compute precise orbits and a precise geoid in order to put into evidence the Sea Surface Topography that can be interpreted as an oceanographic signal related to currents and to several physical parameters; on the other hand, geodesists would like to ask oceanographers to a-priori determine the Sea Surface Topography, in order to be able to extract from the altimeter data the geoid and the orbit errors to be used in the gravity field modelling. The solution to this dilemma can only be found in a cooperative frame. An integrated model to be used for a single-step treatment of altimetry is probably far to be defined, so at present geodesists and oceanographers must cooperate to obtain step-wise and iterative modelling of the gravity field and of the oceanographic phenomena. This is precisely the reason why the school on Satellite Altimetry was organized on an interdisciplinary basis...

Description / Table of Contents: PREFACE Turbidity currents have been comprehensively studied in the past although much remains unknown about both their flow characteristics and resultant sedimentary deposits. Much of this uncertainty arises from the catastrophic nature of their formation which makes them difficult to study in the environment, and has resulted in the majority of studies being experimental or theoretical. Experiments have shown that reversals in the flow of density currents can be associated with the generation of internal solitary waves. This is in contrast to the belief held by many workers that the reversal of a turbidity current simply generates an identical flow travelling in the opposite direction. This book arose from the need for a detailed experimental study to examine the effects and to consider the consequences of density current reversals from a variety of obstructions to their flow. The first part of this book comprises a detailed review of literature covering the fluid dynamics and sedimentology relevant to the experimental study (chapter one). Chapter two presents the results from the comprehensive experimental programme which are discussed and compared with appropiate theoretical hypotheses. This permits the synthesis of a model for the general features of flows that result from the incidence of density currents upon obstructions to the flow. The application of this model to both modern and ancient turbidite systems is then discussed in chapter three. This book is suitable for earth scientists with an interest in the dynamics of turbidity currents. In addition, workers from other fields such as applied maths, meteorology and engineering who have an interest in density currents and bores in practical situations may find it useful...

Description / Table of Contents: PREFACE Some of the major ecological and social problems of the present and future are the production, treatment, and disposal of anthropogenic wastes. Iaais is equally true for sparsely and densely populated industrial areas, including large countries in which sites for waste disposal would seem to be readily available. Especially nonradioactive hazardous wastes with their long-term toxicity need to be isolated from the biosphere just as effectively as radioactive substances. The long-term safety required of waste disposal sites can only be assured under specific geological and mineralogical conditions in certain parts of the lithosphere (underground repositories). The subjects related to the production, avoidance, treatment, and disposal of anthropogenic wastes cover a range of knowledge encompassing the natural sciences, engineering, medicine, and law. This work presents some fundamental situations and problems conceming the disposal of toxic hazardous wastes which have been dealt with in several research projects. The individual chapters are related scientifically. Long-term, effective solutions to our waste problems can only be found when interrelationships and possible future developments are considered. Only the current status of this rapidly developing field can be discussed here. The individual chapters contain scientifically founded data and observations. Other aspects for which there are still controversial opinions and arguments are also discussed, which should stimulate further thought. Further developments and scientific advances can only be achieved by constantly challenging previous theories, and not through static observation and narrow-mindedness. The most extensive quantification possible of the problems related to disposal of hazardous wastes is an essential aim of our work. This not only involves calculating the volume of waste and available repository space, but also compiling data on the long-term effects and the safe, long-term isolation of anthropogenic wastes from the biosphere. A simple description of conditions and processes without using concrete data, which is still widespread, is rejected since it frequently leads to pure speculation. The scientific fundamentals and results presented in this work are of general validity for many questions concerning waste disposal. One example is the amount of waste produced annually in Germany, in which toxic, hazardous wastes play a major role. FoIlowing this train of thought, available data are used to show how limited the possibilities are for the long-term safe underground deposition of hazardous wastes with respect to the current quantities of waste. Of utmost importance is information on the 10ng-term effects of toxic wastes, as well as criteria which have to be considered with respect to the long-term safe deposition of hazardous waste. The natural chemical cycles and material transport in the various zones of the earth are the focus of interest here. They are the scientific basis for assessing every repository for anthropogenic wastes in geological systems. Therefore the significance of material transport and geochemical cycles is emphasized regarding all questions concerning the long-term safety of repositories on the earth's surface and in the lithosphere. Thus, our concept for the scientific evaluation of the long-term safety of underground repositories in geological systems differs from all other models presently under discussion in Germany. In this work, marine evaporites are discussed with respect to the underground deposition of hazardous wastes and the long-term safety of underground repositories in salt rocks. The isolation of hazardous materials from the biosphere can above all be influenced by fluid phases. Fluid phases can mobilize and transport hazardous materials through rocks in the biosphere. This is true, without exception, for all magmatic, sedimentary, and metamorphic rocks, and for marine evaporites, too! In Germany evaporites have commonly been considered to be completely impermeable with respect to fluid phases (solutions and gases). This erroneous view stems from a complete lack of knowledge or misestimation of the dynamic evolution of the composition of evaporite bodies. Unfortunately, this is still true today for parts of some state agencies which deal with repositories. However, all observations of evaporite bodies made over the last more than 100 years have clearly shown that under certain conditions fluid and gaseous components are mobile in evaporites as well. Solutions in marine evaporites have been the object of personal interest and scientific research of A.G. Herrmann for 40 years. The occurrence and formation of salt solutions in the various salt mining districts of Germany are presently being restudied and reevaluated on an extended scientific basis (e.g., v. BORSTEL 1992). A presentation of the current knowledge on salt solutions is beyond the scope of this publication. However, in the interest of continuing research a research project proposed by A.G. Herrmann (1987b) will be introduced here. The direct quantitative analysis of the chemical composition (quatemary and quinary systems) of small fluid inclusions in rocks of the salt deposits of Hessen and Niedersachsen are the primary focus of this project. Information important to fundamental research on the formation and alteration of salt rocks and on the long-term safety of underground repositories should be gained from these studies (e.g., HERRMANN & v. BORSTEL 1991). In addition to salt solutions, gases are also fluid components which occur in practically all marine evaporite deposits. Hence, both salt solutions and gases must be carefully considered when planning underground repositories in an evaporite body and evaluating their long-term safety. This publication contains an up-to-date overview of the gas occurrences in the marine evaporites of Central Europe. Despite previous studies, there is still a considerable deficit in scientific information regarding the distribution and formation of gases in the evaporites occurring in Germany. A detailed research program on the geochemical relationships involving the formation of evaporites and gases will draw attention to this situation. One aspect must be emphasized in the planning and construction of repositories for anthropogenic wastes: their long-term safety. This publication deals precisely with this subject, and in Part III of this work we will present the concept that we have developed. This concept is based on the fact that evaporite bodies are subject to a dynamic evolution and that the chemical and mineralogical composition provides important information on the effect of fluid phases on salt rocks. Previous works contain the testing of methods and presented initial results using the Gorleben salt dome as an example. However, we are just at the beginning of our research project on the long-term safety of underground repositories (e.g., HERRMANN & KNIPPING 1989, HERRMANN 1992). The information contained in this publication is based on years of experience in evaporite research and underground repositories for anthropogenic wastes. Examples are presented which can be applied to similar situations and problems in other countries. Waste disposal is not just a national problem, it has long become an international one for all types of anthropogenic wastes...

Description / Table of Contents: PREFACE The ocean has always been reluctant to reveal its secrets. Its size and the inaccessibility of its deeper regions have made their safeguard a reasonably simple matter with the result that significant misconceptions persisted for many years. Two of the most widespread of these concerned the featureless nature of the sea floor and the silence of the deep ocean. Underwater acoustics has played a key role in discrediting both and in so doing introduced new and exciting developments in oceanography and geophysics. In the years following World War II, echosounders and subbottom profilers based on new active sonar technology, revealed the true nature of the seafloor topography and led to the major advances represented by plate tectonics. Research driven by the requirements of passive sonar, on the other hand, was to demonstrate that the sea was not silent but was characterised by a complex noise spectrum. Many individual mechanisms and sources ranging from man-made, biological and geophysical activity to the intrinsic noise of the sea itself were found to contribute to this spectrum. A major component, which is the subject of this book, was to remain unrecognised to underwater acoustics until noise measurements could be made effectively at very low frequencies, although its presence had been indicated by seismology long before these measurements were possible. By virtue of its geographical isolation in the Southern Ocean, New Zealand has provided an ideal environment for long-range propagation and ambient noise investigations and numerous studies have been reported. Our interest in the subject of this book was aroused initially in the course of one such experiment in 1966. For the first time it had been possible to extend the recording bandwidth to 1 Hz and the improved performance of this new system was anticipated eagerly. However the main purpose of the experiment was nearly aborted by the appearance of a new and unsuspected noise component at frequencies below 10 Hz. Due primarily to technical limitations in the equipment then available, a subsequent programme, designed to identify the properties and origin of the source more clearly, was not productive and was soon abandoned. An opportunity to revisit the problem arose some 10 years later, when the University of Auckland became involved in a major environmental study in support of the development of an offshore gas field in Cook Strait. The technology then available provided an opportunity to examine afresh the relationship between sea state and the seismo-acoustic response generated. An initial trim demonstrated the potential of the site. Accordingly a long-term programme, involving the parallel measurement of the oceanwave field and acoustic response, was undertaken in a series of student research theses. The data so gathered were of sufficiently high quality to ultimately establish wave-wave interactions as the source of the acoustic effects observed and to identify many of its characteristics. This result was soon to be confirmed by other studies. As the noise data accumulated, however, it became apparent that certain refinements to the theories describing the mechanism were required. Our attempts to provide these refinements have been reported in a number of contributions in recent years. The accounts of these and similar contributions by others have unfortunately appeared in the literature in a somewhat disjointed manner, with the result that the evolution of the subject has not been easy to follow. This book attempts to present a more coherent account of the subject and its development. Most of the early experimental and theoretical results from our group have arisen from two key Ph.D. theses, due to Dr. K.C. Ewans and Dr. C.Y. Wu. The painstaking and careful instrumentation development and data analysis provided by Dr. Ewans were critical to the definitive correlation which we were able to establish between wind field, seastate and the acoustic response so generated. Dr. Wu's thesis presented the first phase of our attempt at the resolution of certain key theoretical issues, which were identified in the course of the experimental programme. Both studies owe much to the support of Shell BP Todd Oil Services Ltd., acting for Maui Development Ltd., and to the University of Auckland. The support of the Electricity Corporation of New Zealand Ltd. during a later experimental investigation of the Southern Ocean wave field is also acknowledged...