ALBERT

Description / Table of Contents: SHOCK COMPRESSION OF MATERIALS AND NEW MATERIALS SYNTHESIS / Akira B. Sawaoka / pp. 1-6 --- EXPLOSIVE TECHNIQUE FOR GENERATION OF HIGH DYNAMIC PRESSURE / Shuzo Fujiwara / pp. 7-21 --- TWO-STAGE LIGHT GAS GUN AS A HIGH PRESSURE TOOL FOR MATERIALS SCIENCE STUDY / Akira B. Sawaoka / pp. 23-31 --- A LAUNCH OF A PROJECTILE BY A TWO-STAGE LIGHT GAS GUN AND ITS OPTICAL OBSERVATION / Kunio Soga and Masao Shirouzu / pp. 33-47 --- RAIL GUN DEVELOPNENT AT TOKYO INSTITUTE OF TECHNOLOGY / Shu Usuba, ken-ichi Kondo and Akira B. Sawaoka / pp. 49-66 --- POWER SOURCES AND DIAGNOSTIC SYSTEM FOR RAILGUN / Yozo Kakudate, Shu Usuba, Masatake Yoshida, Katutoshi Aoki, Katsumi Tanaka, and Shyuzo Fujiwara / pp. 67-85 --- DIAMOND AND CUBIC BORON NITRIDE SYNTHESIS BY MEANS OF SHOCK-CONPRESSION / Nobuo Setaka and Tadao Sato / pp. 87-102 --- CHEMICAL EFFECTS OF SHOCK WAVES IN SOLIDS / Yasuhiko Syono / pp. 103-122

Description / Table of Contents: INTRODUCTION --- Shock Compression Chemistry of materials, Y. Horie and A. B. Sawaoka, pp. 3-22 --- 1.1 The Nature of Shock Waves, pp. 3-5 --- 1.2 Compaction of Powders and Shock Activation, pp. 6-9 --- 1.3 First-Order Phase Transitions and Chemical Reactions, pp. 10-12 --- 1.4 Time Scales and Interactions of Basic Mechanisms, p. 12 --- 1.4.1 Shock propagation in a particle assemblage, p. 12 --- 1.4.2 Energy localization, pp. 12-13 --- 1.4.3 Thermal relaxation of hot spots, p. 14 --- 1.4.4 Mass diffusion in solids, p. 14 --- 1.4.5 Kinetic constants, pp. 14-16 --- 1.5 Some Roles of Shock Compression Techniques in Material Sciences Study, p. 16 --- 1.5.1 Shock compression technique as a tool of high pressure production, p. 16 --- 1.5.2 Appearance of diamond anvil-type high-pressure apparatus, pp. 16-18 --- 1.5.3 New roles of shock compression technology as a unique method of very high temperature production, pp. 18-19 --- 1.5.4 Development of conventional hypervelocity impact techniques for precise measurement of materials under shock compression, pp. 19-21 --- FUNDAMENTALS OF SHOCK WAVE PROPAGATION --- Shock Compression Chemistry of materials, Y. Horie and A. B. Sawaoka, pp. 23-78 --- 2.1 Hydrodynamic Jump Conditions and the Hugoniot Curve, pp. 23-32 --- 2.2 Shock Transition in Hydrodynamic Solids, pp. 32-42 --- 2.3 Non-Hydrostatic Deformation of Solids, p. 42 --- 2.3.1 Elastic-ideally-plastic solids, pp. 42-53 --- 2.3.2 Experimental observations of elastic-plastic behavior, pp. 53-56 --- 2.4 Wave-body interactions, pp. 56-57 --- 2.4.1 Preliminaries, pp. 57-60 --- 2.4.2 Planar impact of similar and dissimilar bodies, pp. 60-61 --- 2.4.3 Shock wave interaction with material boundaries, pp. 61-64 --- 2.4.4 Wave-wave interactions, pp. 65-66 --- 2.4.5 Detonation wave and interaction with a solid surface, pp. 66-77 --- SHOCK COMPRESSION TECHNOLOGY --- Shock Compression Chemistry of materials, Y. Horie and A. B. Sawaoka, pp. 79-115 --- 3.1 Gun Techniques, p. 80 --- 3.1.1 Single stage gun, p. 80 --- 3.1.2 Conventional two stage light gas gun, pp. 80-83 --- 3.1.3 Velocity measurement of projectile, p. 83 --- 3.1.4 Magnetoflyer method, pp. 83-84 --- 3.1.5 CW x-ray velocity meter, pp. 84-86 --- 3.1.6 Measurement of interior projectile motion, pp. 86-87 --- 3.1.7 Recovery experiments, pp. 87-89 --- 3.2 Explosive Techniques, p. 89 --- 3.2.1 Plane shock wave generation and recovery fixture, pp. 89-91 --- 3.2.2 Numerical simulaation of shock compression in the recovery capsule, pp. 91-94 --- 3.2.3 Cylindrical recovery fixture, pp. 94-95 --- 3.3 In-situ Measurements, p. 95 --- 3.3.1 Manganin pressure gauge, pp. 95-98 --- 3.3.2 Particle velocity gauge, pp. 99-100 --- 3.3.3 Observations of multiple shock reverberations by using a manganin pressure gauge and particle velocity gauge, pp. 100-106 --- 3.3.4 Shock temperature measurement, pp. 106-111 --- 3.3.5 Copper-Constantan thermocouple as a temperature and pressure gauge, pp. 111-113 --- THERMOMECHANICS OF POWDER COMPACTION AND MASS MIXING --- Shock Compression Chemistry of materials, Y. Horie and A. B. Sawaoka, pp. 117-170 --- 4.1 A One Dimensional Particulate Model, pp. 117-123 --- 4.2 Continuum Models, p. 123 --- 4.2.1 Hydrodynamic models, pp. 124-141 --- 4.2.2 Continuum plasticity theory, pp. 141-148 --- 4.2.3 Application, pp. 148-154 --- 4.3 Particle Bonding and Heterogeneous Processes, pp. 154-160 --- 4.4 Mass Mixing, pp. 160-169 --- THERMOCHEMISTRY OF HETEROGENEOUS MIXTURES --- Shock Compression Chemistry of materials, Y. Horie and A. B. Sawaoka, pp. 171-225 --- 5.1 Thermodynamic Functions of Heterogeneous Mixtures, pp. 172-187 --- 5.2 Analytical Equations of State, pp. 187-191 --- 5.3 Hugoniots of Inert Mixtures, p. 191 --- 5.3.1 Thermodynamically equilibrium models, pp. 191-197 --- 5.3.2 Mechanical models, pp. 197-199 --- 5.4 First-Order Phase Transitions, pp. 199-206 --- 5.5 Chemical Equilibria, pp. 206-212 --- 5.6 Reaction Kinetics, p. 212 --- 5.6.1 Rate equations, pp. 212-214 --- 5.6.2 Nucleation, pp. 214-216 --- 5.6.3 Growth, pp. 216-217 --- 5.6.4 Pressure effects, pp. 217-218 --- 5.7 Shock-Induced Reactions in Powder Mixtures, pp. 218-224 --- HYDRODYNAMICAL CALCULATIONS --- Shock Compression Chemistry of materials, Y. Horie and A. B. Sawaoka, pp. 227-276 --- 6.1 Conservation Equations of Continuum Flow, pp. 227-228 --- 6.1.1 Mass conservation, pp. 228-230 --- 6.1.2 Conservation of linear momentum, pp. 230-231 --- 6.1.3 Enegy conservation, pp. 231-234 --- 6.2 Constitutive Modeling of Inorganic Shock Chemistry, pp. 234-235 --- 6.2.1 VIR model, pp. 235-239 --- 6.2.2 Pore collapse, p. 239 --- 6.2.3 Chemical kinetics, pp. 239-240 --- 6.2.4 Computational constitutive reactions, pp. 240-245 --- 6.3 Applications of the VIR Model, p. 245 --- 6.3.1 Shock wave profiles in Ni/Al powder mixtures, pp. 245-250 --- 6.3.2 Compaction of diamond with Si and graphite, pp. 250-257 --- 6.4 Continuum Mixture Theory and the VIR Model, p. 257 --- 6.4.1 Continuum mixture theory, pp. 257-263 --- 6.4.2 Derivation of the VIR model using the CMT, pp. 263-269 --- 6.4.3 A model of heterogeneous flow, pp. 269-275 --- SHOCK CONDITIONING AND PROCESSING OF CERAMICS --- Shock Compression Chemistry of materials, Y. Horie and A. B. Sawaoka, pp. 277-360 --- 7.1 Shock Conditioning of Powder of Inorganic Materials, p. 227 --- 7.1.1 Brief review of shock conditioning studies, p. 227 --- 7.1.2 Aluminum oxide powder, pp. 277-281 --- 7.2 Shock Synthesis of Inorganic Materials, p. 281 --- 7.2.1 Shock synthesis studies, p. 281 --- 7.2.2 High dense forms of carbon, pp. 281-285 --- 7.2.3 High dense forms of boron nitride, pp. 285-287 --- 7.2.4 Shock treatment of boron nitride powders, pp. 287-301 --- 7.3 Shock Consolidation of Ceramic Powders, p. 301 --- 7.3.1 Why non-oxide ceramics?, pp. 301-302 --- 7.3.2 Dynamic consolidation of SiC powders, pp. 302-304 --- 7.3.3 Approach to the fabrication of crack free compacts, pp. 304-305 --- 7.3.4 Shock consolidation of SiC powder utilizing post shock heating by exothermic reaction, pp. 305-310 --- 7.4 Dynamic Compaction of Zinc Blende Type Boron Nitride and Diamond Powders, p. 310 --- 7.4.1 Background, pp. 310-311 --- 7.4.2 Cubic boron nitride, pp. 311-318 --- 7.4.3 Diamond, pp. 318-326 --- 7.4.4 Diamond composites obtained by utilizzing exothermic chemical reaction, pp. 326-332 --- 7.5 Very High Pressure Sintering of Shock Treated Powders, pp. 332-334 --- 7.5.1 Silicon nitride, pp. 334-336 --- 7.5.2 w-BN, pp. 336-346 --- 7.6 Rapid Condensation of High Temperature Ultrasupersaturated Gas, p. 346 --- 7.6.1 Silicon nitride, pp. 346-352 --- 7.6.2 Carbon, pp. 352-357

Description / Table of Contents: Chapter 1: General Aspects of the Cobalt Chemistry by Yasemin Yildiz --- Chapter 2: Synthesis, Processing, and Characterization of the Cobalt Alloys with Silicon Addition by Petrica Vizureanu, Mirabela Georgiana Minciuna, Gianina Iovan and Simona Stoleriu --- Chapter 3: Synthesis of Cobalt-Based Nanomaterials from Organic Precursors by Maria Smyrnioti and Theophilos Ioannides --- Chapter 4: Hydrothermally Produced Cobalt Oxide Nanostructures at Different Temperatures and Effect on Phase Transition Temperature and Threshold Voltage of Nematic Liquid Crystal Host by Hasan Eskalen, Süleyman Kerli and Şükrü Özgan --- Chapter 5: Substitution and Redox Properties of Some Organoisocyanide Cobalt(II) Complexes by Olayinka A. Oyetunji, Godiraone Tatolo, Banyaladzi D. Paphane and Clifford A. L. Becker --- Chapter 6: Effect of Cobalt on Morphology of Microhole Formed by Micropunching by Kelvii Wei Guo and Hon Yuen Tam --- Chapter 7: A Review of the Radionuclide, Cobalt-60, as a Fine-Sediment Tracer by Philip Greenwood

Description / Table of Contents: Chapter 1: Sustainable Solid Waste Recycling by Ahmad K. Jassim --- Chapter 2: Sustainable Power Technology: A Viable Sustainable Energy Solution by Kikelomo Ijagbemi --- Chapter 3: Sustainable Maintenance Practices and Skills for Competitive Production System by Adeyeri Michael Kanisuru --- Chapter 4: Interventions to Skills Development in the Automotive Manufacturing Sector of South Africa by Opeyeolu Timothy Laseinde and Grace Mukondeleli Kanakana --- Chapter 5: Designing and Developing New VET Curricula to Address Skills Gaps in the Aeronautics Industry by Rosa Maria Arnaldo Valdés, Victor Fernando Gómez Comendador and Alvaro Rodriguez Sanz

Description / Table of Contents: Chapter 1: Numerical Analysis of Three-Dimensional MHD Nanofluid Flow over a Stretching Sheet with Convective Boundary Conditions through a Porous Medium by Stanford Shateyi --- Chapter 2: Cattanneo-Christov Heat Flux Model Study for Water-Based CNT Suspended Nanofluid Past a Stretching Surface by Noreen Sher Akbar, C. M. Khalique and Zafar Hayat Khan --- Chapter 3: Thermophysical Properties of Metal Oxides Nanofluids by Zafar Said and Rahman Saidur --- Chapter 4: Measuring Nanofluid Thermal Diffusivity and Thermal Effusivity: The Reliability of the Photopyroelectric Technique by Monir Noroozi and Azmi Zakaria --- Chapter 5: Problems Faced While Simulating Nanofluids by Adil Loya --- Chapter 6: Enhancing Heat Transfer in Internal Combustion Engine by Applying Nanofluids by Wenzheng Cui, Zhaojie Shen, Jianguo Yang and Shaohua Wu --- Chapter 7: Heat Transfer of Ferrofluids by Seval Genc --- Chapter 8: Nanofluid with Colloidal Magnetic Fe3O4 Nanoparticles and Its Applications in Electrical Engineering by Lucian Pîslaru-Dănescu, Gabriela Telipan, Floriana D. Stoian, Sorin Holotescu and Oana Maria Marinică --- Chapter 9: Magnetic Nanofluids: Mechanism of Heat Generation and Transport and Their Biomedical Application by Prem P. Vaishnava and Ronald J. Tackett --- Chapter 10: Energy Transfer in Mixed Convection MHD Flow of Nanofluid Containing Different Shapes of Nanoparticles in a Channel Filled with Saturated Porous Medium by Aaiza Gul, Ilyas Khan and Sharidan Shafie

Description / Table of Contents: Nishimura, T. Rust Formation Mechanism on Low Alloy Steels after Exposure Test in High Cl− and High SOx Environmen. Materials 2017, 10(2), 199; doi:10.3390/ma10020199. http://www.mdpi.com/1996-1944/10/2/199 --- Chang, T.; Odnevall Wallinder, I.; de la Fuente, D.; Chico, B.; Morcillo, M.; Welter, J.; Leygraf, C. Analysis of Historic Copper Patinas. Influence of Inclusions on Patina Uniformity. Materials 2017, 10(3), 298; doi:10.3390/ma10030298. http://www.mdpi.com/1996-1944/10/3/298 --- Na, O.; Cai, X.; Xi, Y. Corrosion Prediction with Parallel Finite Element Modeling for Coupled Hygro-Chemo Transport into Concrete under Chloride-Rich Environment. Materials 2017, 10(4), 350; doi:10.3390/ma10040350. http://www.mdpi.com/1996-1944/10/4/350 --- Kreislova, K.; Knotkova, D. The Results of 45 Years of Atmospheric Corrosion Study in the Czech Republic. Materials 2017, 10(4), 394; doi:10.3390/ma10040394. http://www.mdpi.com/1996-1944/10/4/394 --- Alcántara, J.; Fuente, D.; Chico, B.; Simancas, J.; Díaz, I.; Morcillo, M. Marine Atmospheric Corrosion of Carbon Steel: A Review. Materials 2017, 10(4), 406; doi:10.3390/ma10040406. http://www.mdpi.com/1996-1944/10/4/406 --- Hosseinpour, S.; Johnson, M. Vibrational Spectroscopy in Studies of Atmospheric Corrosion. Materials 2017, 10(4), 413; doi:10.3390/ma10040413. http://www.mdpi.com/1996-1944/10/4/413 --- Panchenko, Y.; Marshakov, A. Prediction of First-Year Corrosion Losses of Carbon Steel and Zinc in Continental Regions. Materials 2017, 10(4), 422; doi:10.3390/ma10040422. http://www.mdpi.com/1996-1944/10/4/422 --- Chico, B.; de la Fuente, D.; Díaz, I.; Simancas, J.; Morcillo, M. Annual Atmospheric Corrosion of Carbon Steel Worldwide. An Integration of ISOCORRAG, ICP/UNECE and MICAT Databases. Materials 2017, 10(6), 601; doi:10.3390/ma10060601. http://www.mdpi.com/1996-1944/10/6/601 --- Bouchar, M.; Dillmann, P.; Neff, D. New Insights in the Long-Term Atmospheric Corrosion Mechanisms of Low Alloy Steel Reinforcements of Cultural Heritage Buildings. Materials 2017, 10(6), 670; doi:10.3390/ma10060670. http://www.mdpi.com/1996-1944/10/6/670 --- Tidblad, J.; Kreislová, K.; Faller, M.; de la Fuente, D.; Yates, T.; Verney-Carron, A.; Grøntoft, T.; Gordon, A.; Hans, U. ICP Materials Trends in Corrosion, Soiling and Air Pollution (1987–2014). Materials 2017, 10(8), 969; doi:10.3390/ma10080969. http://www.mdpi.com/1996-1944/10/8/969 --- Cole, I. Recent Progress and Required Developments in Atmospheric Corrosion of Galvanised Steel and Zinc. Materials 2017, 10(11), 1288; doi:10.3390/ma10111288. http://www.mdpi.com/1996-1944/10/11/1288

Description / Table of Contents: The CleanEra project was initiated with the goal of developing revolutionary ideas for civil aviation. These ideas were to offer solutions which would limit and reduce some of the negative aspects of aviation, namely: emissions and the use of resources. This book presents you with the highlights of this journey in search of new technologies for a revolutionary aircraft; an aircraft that not only offers a future of comfortable air travel for the passenger, but a future of sustainable aviation for the planet as well.

Description / Table of Contents: The present Special Issue intends to explore new directions in the field of acoustics and ultrasonics. The interest includes, but is not limited to, the use of acoustic technology for condition monitoring of materials and structures. (The basis of this issue comes from selected papers of the 6th International Conference on Emerging Technologies in Non-destructive Testing, ETNDT6 held in Brussels May 27-29th, 2015).

Description / Table of Contents: The propulsion system behaviour is a key aspect for the overall dynamics of a ship. However, despite its great importance, numerical methodologies for detailed investigations on marine propulsion dynamics are not yet widely covered in scientific literature. This book presents the main steps for the development of a multi-physic simulation platform, able to represent the motions of a twin screw ship in six degrees of freedom, taking into account the whole propulsion system and automation effects. A number of mathematical sub-models had been developed and calibrated by a set of experimental tests, in model and full scale. Finally, the sea trials campaign of a ship is used to validate and tune the developed simulator. The proposed simulation methodology can be used in the ship preliminary design phase, in order to plan and test the propulsion system and automation. Further applications can include the design optimization and crew training.

Description / Table of Contents: Chapter 1: Introductory Chapter: VLSI by Kim Ho Yeap and Humaira Nisar --- Chapter 2: Transistor Degradations in Very Large-Scale-Integrated CMOS Technologies by Chang Yeol Lee --- Chapter 3: Low Power Design Methodology by Vithyalakshmi Natarajan, Ashok Kumar Nagarajan, Nagarajan Pandian and Vinoth Gopi Savithri --- Chapter 4: High-purity Refractory Metals for Thin Film Metallization of VLSI by Vadim Glebovsky --- Chapter 5: Operational Amplifier Design in CMOS at Low-Voltage for Sensor Input Front-End Circuits in VLSI Devices by Muhaned Zaidi, Ian Grout and Abu Khari A’ain --- Chapter 6: Design of High-Order CMOS Analog Notch Filter with 0.18 μm CMOS Technology by Kittipong Tripetch