ALBERT

Description: Sowing time, as an element, is important to improving the adaptation of cultivars to environmental conditions and to achieving high seed yields. The field experiment was conducted from 2018–2019 at the Experimental Station of Vytautas Magnus University Agriculture Academy. The experimental design included treatments with different sowing dates: eight sowing dates in 2018 and 10 sowing dates in 2019. The first sowing of spring rapeseed was carried out when the soil reached its physical maturity, i.e., it did not stick to agricultural implements and it crumbled well. The other sowing dates were every seven subsequent days. From 2018–2019, the rapeseed emerged as best in early May (3 and 4 May), and later sowing reduced the emergence of rapeseed. In 2018, most pods were formed on one plant when the rapeseed was sown (on 1 June), compared to other sowings, on average 2.8 times more. In 2019, most pods were formed by the latest-sown rapeseed (7 June), from 1.4 to 2.7 times more compared to previously sown crops. In 2018, the sowing time of spring rapeseed did not have a significant effect on the number of seeds in one pod. In 2019, it was found that the rapeseed formed most of the seeds in the pod at a similar time as in 2018: the sowings of 19 April and 7 June. The average number of seeds in the pod was significantly reduced by early sowing (5 April). In 2019, the highest 1000-seed weight was found at the earliest-sown crop (5 April), which was on average 18.0% higher compared to the later sowings. The 1000-seed weight of the last-sown rapeseed (7 June) was the lowest. In 2018, the yields of early-sown (20 April) spring rapeseed were the highest. Later sowing significantly reduced the yields by 20.7 to 48.2%. In 2019, the highest seed yield was obtained after sowing spring rapeseed in late April (26 April); it was significant, on average, 1.9 times higher than the yields of spring rapeseed sown from 3 May to 7 June. Meteorological conditions had a stronger effect on the field emergence and yield components of spring rapeseed than the sowing date.

Description: Mycotoxins are toxic secondary metabolites produced by fungi on agricultural produce. Mycotoxins can be cytotoxic, genotoxic, mutagenic, and teratogenic, and they are persistent threats to human and animal health. Consumption of mycotoxin-contaminated maize can cause cancer and even sudden death. Health hazards can also occur from consuming products from animals fed with mycotoxin-contaminated feed or forage. The main mode of spread of mycotoxigenic fungi is through air-borne spores originating from soil or plant debris, although some fungi can also spread through infected seed-to-seedling transmission, ultimately followed by contamination of the harvestable product. This perspective assesses opportunities to prevent mycotoxigenic fungal infection in maize seeds produced for sowing as an important starting point of crop contamination. A case study of Nigeria showed infection in all tested farmer-produced, seed company, and foundation seed samples. A schematic overview of the formal and informal seed systems is presented to analyze their contribution to fungal infection and mycotoxin contamination in the maize value chain, as well as to set criteria for successful control. We recommend an integrated approach to control mycotoxigenic fungal infection, including resistant varieties and other control methods during seed production, grain production, and grain storage, with an important role in maintaining seed health.

Description: Strigolactones (SLs) are a prime example of allelochemicals, promoting parasitic plant germination and certain hyphal branching factors associated to the growth of symbiotic arbuscular mycorrhizal fungi (AMF). However, the study of SLs is complex, and various issues have yet to be studied in depth. This review intends to provide an overview of the works that have been conducted on the identification, isolation, and evaluation of the allelopathic activity of natural canonical and non-canonical SLs on parasitic weeds and AMF growth. These topics were related with their application in agriculture through trap crops, suicidal germination or intercropping strategies. The high applicability of SLs in agriculture, for example, as preventing herbicides for parasitic weed control, has increased the interest for these compounds and the number of research articles published. This review updates and discusses the last findings in this field, with special emphasis in the results published since 2015, using tables and graphs to summarize and discuss that information. The promising results and conclusions obtained from the bioassays herein presented provide a good reason to encourage and support further research works on these natural products, which must also consider the disadvantages or current limitations that SLs present.

Description: Alfalfa and red clover are important perennial legumes for the production of high-quality fodder. The improvement of the forage quality of legumes is one of the strategic goals of breeding programs. Variation in quality traits (protein content (CP), neutral detergent fiber content (NDF), and acid detergent fiber content (ADF)) and relative feed value (RFV) among seven cultivars and 39 elite breeding populations of alfalfa and red clover was evaluated in the study. Significant differences were determined among the investigated cultivars/populations. Alfalfa populations L-8, 10, 12, 15, and 20 were characterized by a high CP content (up to 23.47%) and/or low NDF and ADF contents. The highest CP content in red clover was recorded in population CD-18 (21.89%), while the lowest NDF and ADF contents were determined in populations CD-19 and CD-4, respectively. High RFV was determined in alfalfa populations L-10, 12, 20, 15, 16, 8, 11, and 17 (prime fodder), and in red clover populations CD-4, 8, 16, 14, and 19 (premium-quality fodder). The identified superior alfalfa and red clover populations will be used to improve the nutritional value of forage crops in our breeding program, which will lead to the release of novel cultivars with improved forage quality.

Description: Sustainability is one of the main components of precision farming that will lead to food security and production resources for current and future generations. The selection of suitable hybrids and fertilizers is among the methods that can directly influence sustainable agriculture and economic efficiency at the farm level, providing accurate site-specific nutrient management strategies for yield maximization. This experiment included two fertilizer sources in ten maize hybrids in four replications for three consecutive years (2018–2020). The experiment was carried out at the Látókép Crop Production Experimental Site of the University of Debrecen, Hungary. The results of the ANOVA showed that genotype, year, and fertilizer levels had various effects on grain yield, oil, protein, and starch content. FAO340 had maximum grain yield on different fertilizers (NPK and N), and FAO350 had maximum protein content. To gain the best performance and maximum yield of maize on protein and oil, FAO350 is recommended for protein and FAO340 for oil content. The parameters of grain yield, oil content, protein content, and starch content affected by NPK fertilizer provide the stability of grain yield parameters. FAO360, FAO420, and FAO320 hybrids had their maximum desirable N fertilizer doses and NPK fertilizer stability in this research. These results indicate that FAO360, FAO420, and FAO330 hybrids had their maximum potential yield in different fertilizer and environmental conditions. Based on this multi-year study, the complete NPK fertilizer with 150 kg/ha nitrogen, 115 kg/ha potassium, 135 kg/ha phosphorus is recommended to be used on maize hybrids.

Description: The efficacy of plant-based biostimulants lays on the extraction of bioactive compounds that can trigger positive biological responses in plants. Their use has been increasing for lowering the production costs, enhance the yield and the stress tolerance, and improve the cropping systems’ sustainability. The aim of this work was to investigate the effect of maceration time on borage extracts, subsequently sprayed on rocket plants hydroponically grown. A preliminary test was also assessed to evaluate the extracts’ effect on seeds germination. Borage leaves and flowers were separated and macerated in the same conditions for different times. The obtained borage extracts were applied two times during the cultivation of rocket plants. The yield was not affected by the treatments, while the quality of leafy vegetables was improved. The results indicated that the flower extracts (FE) were more active than leaf extracts (LE) in stimulating the crop response. Promising results were observed on the nitrate assimilation, with reduced accumulation in the edible and commercial parts. Non-destructive analysis revealed that electron transport rates were significantly higher in treated plants. Biostimulant effects were also confirmed by the lowering of sucrose and sugars content in the treated plants and by a general increment of secondary metabolites.

Description: Biochemical stability of soil humus is an important factor affecting soil quality. Fungi are among the most efficient decomposers of humic matter due to presence of oxidative enzymes, including phenoloxidase laccase. Production of laccase by zygomycetes, a group of cellulolytic fungi widespread in soil, is poorly studied. The potential role of laccase from zygomycetes in humus turnover is unknown. Here, we show for the first time that laccase of zygomycetous fungus Mortierella elasson can effectively depolymerize humic acids in vitro. The fungus produced laccase extracellularly in a liquid culture medium. Unlike in case of laccases in ligninolytic basidiomycetes, attempts to increase enzyme activity using inductors, changes in the source of nitrogen and carbon failed to lead to any increase in laccase production. Laccase was purified using ion exchange chromatography and gel filtration. The molecular weight of the laccase was 51.75 kDa. The laccase catalyzed the oxidation of ABTS and K4[Fe(CN)6], phenolic compounds, but not tyrosine. The laccase activity was inhibited by NaN3 and NaF. The pH optimum of the laccase activity was 3.0 for ABTS and 5.0 for 2,6-dimethoxy phenol. The enzyme had moderate thermal stability and was rapidly inactivated at 70 °C. Purified laccase depolymerized humic acids from retisol, compost and peat more effectively than culture liquid containing laccase. The results of the study extend our knowledge of the role of laccases from different producers in the transformation of natural organic matter.

Description: Marketplace platforms gather and store data on each activity of their users to analyze their customer purchase behavior helping to improve marketing activities such as product placement, cross-selling, or customer retention. Market basket analysis (MBA) has remained a valuable data mining technique for decades for marketers and researchers. It discovers the relationship between two products that are frequently purchased together using association rules. One of the issues with this method is its strict focus on binary relationships, which prevents it from examining the product relationships from a broader perspective. The researchers presented several methods to address this issue by building a network of products (co-purchase networks) and analyzing them with network analysis techniques for purposes such as product recommendation and customer segmentation. This research aims at segmenting products based on customers’ purchase patterns. We discover the patterns using the Stochastic Block Modeling (SBM) community detection technique. This statistically principled method groups the products into communities based on their connection patterns. Examining the discovered communities, we segment the products and label them according to their roles in the network by calculating the network characteristics. The SBM results showed that the network exhibits a community structure having a total of 309 product communities, 17 of which have high betweenness values indicating that the member products play a bridge role in the network. Additionally, the algorithm discovers communities enclosing products with high eigenvector centralities signaling that they are a focal point in the network topology. In terms of business implications, segmenting products according to their role in the system helps managers with their marketing efforts for cross-selling, product placement, and product recommendation.

Description: Panax ginseng is a well-known medicinal plant that achieves strong resistance against plant pathogens while growing in the wild. Due to the high market demand for ginseng as a health food source, ginseng cultivation is prevalent in South Korea. However, continuous monocropping creates problems like irregular growth or vulnerability to crop diseases. Quorum sensing (QS) deals with the intracellular communication of bacteria and plays a role in dynamic changes in the soil microbiome. Here, we investigated how acyl-homoserine lactone (AHL) signaling molecules in QS (C8, C10, and C12) improve plant growth and induce shifts in the soil microbiome. To assess the effects, we recorded root and shoot growth of ginseng seedlings and checked the changes in the soil microbiome during different time points (0, 2, 4, and 8) after 8 weeks of growth. We observed that soils treated with N-decanoyl-L-homoserine lactone (C10) showed the most pronounced effects. Very striking was that C10 had the lowest alpha diversity. Using Phylogenetic Investigation of Communities by Reconstruction of Unobserved States (PICRUSt2), we observed a high number of QS-related functional genes, with the highest count occurring in the untreated planted soil (W). Together with the known direct and beneficial effects of AHLs on plant development, AHLs treated mono-cropped soil showed trends in the microbiome community.

Description: Heavy metal pollution of soil restricts the sustainable use of land and poses risks to human health throughout the world. Changes in the physicochemical properties of soil may increase the mobility of heavy metals in the soil ecosystem and lead to groundwater pollution. In this study, the effects of different salt solutions (NaCl, CaCl2, NaNO3, MgCl2, Na2SO4, and mixed salts) on the release of Cd from soil were investigated by batch desorption tests and the Freundlich isothermal sorption model. Increased concentrations of the salts, except for NaNO3, significantly promoted Cd release (R2 〉 0.9, p 〈 0.01). Under the salt stress, Cd release from the test soils was promoted more by CaCl2 and MgCl2 than by the other salts, and the average desorption rates of eight soil samples at 3.5% salt concentration were 11.15% and 10.80%, respectively, which were much higher than those of NaCl (4.05%), Na2SO4 (0.41%), and NaNO3 (0.33%). Ca2+ and Mg2+ showed better ion exchange capacity than Na+ to promote Cd release; for anions, Cl− formed hydrophilic Cd chloride complexes with Cd in soil. In addition, principal component analysis results revealed that Cd release was mainly influenced by soil texture, cation exchange capacity, and iron–manganese oxide content of the soil. The Cd release level for different soil samples was most closely related to the proportion of fine particles in the soil. The higher the clay content was, the higher the Cd desorption rate.