ALBERT

Description: Gut microbiota, a major contributor to human health, is influenced by physical activity and diet, and displays a functional cross-talk with skeletal muscle. Conversely, few data are available on the impact of hypoactivity, although sedentary lifestyles are widespread and associated with negative health and socio-economic impacts. The study aim was to determine the effect of Dry Immersion (DI), a severe hypoactivity model, on the human gut microbiota composition. Stool samples were collected from 14 healthy men before and after 5 days of DI to determine the gut microbiota taxonomic profiles by 16S metagenomic sequencing in strictly controlled dietary conditions. The α and β diversities indices were unchanged. However, the operational taxonomic units associated with the Clostridiales order and the Lachnospiraceae family, belonging to the Firmicutes phylum, were significantly increased after DI. Propionate, a short-chain fatty acid metabolized by skeletal muscle, was significantly reduced in post-DI stool samples. The finding that intestine bacteria are sensitive to hypoactivity raises questions about their impact and role in chronic sedentary lifestyles.

Description: We report that polymerization makes a robust, practically applicable multifunctional optical device with a continuous wavelength tunable over 500 nm spectral range using UV-polymerizable cholesteric liquid crystals (CLCs). It can be used as a circular polarizer generating an extremely high degree of circularly polarized light with |g| = 1.85~2.00. It can also be used for optical notch filters, bandwidth-variable (from ~28 nm to ~93 nm) bandpass filters, mirrors, and intensity-variable beam splitters. Furthermore, this CLC device shows excellent stability owing to the polymerization of CLC cells. Its performance remains constant for a long time (~2 years) after a high-temperature exposure (170 °C for 1 h) and an extremely high laser beam intensity exposure (~143 W/cm2 of CW 532 nm diode laser and ~2.98 MW/cm2 of Nd: YAG pulse laser operation for two hours, respectively). The optical properties of polymerized CLC were theoretically analyzed by Berreman’s 4 × 4 matrix method. The characteristics of this device were significantly improved by introducing an anti-reflection layer on the device. This wavelength-tunable and multifunctional device could dramatically increase optical research efficiency in various spectroscopic works. It could be applied to many instruments using visible and near-infrared wavelengths.

Description: Over the last years, the replacement of traditional polymer modifiers with waste plastics has attracted increasing interest. The implementation of such technology would allow a drastic reduction of both production cost and landfill disposal of wastes. Among all, polyethylene-based plastics have been proved suitable for this purpose. The research activities presented in this paper aim to assess the synergistic effect of polyethylene and Fischer–Tropsch waxes on the viscoelastic properties and performance of the bitumen. In order to reduce the blending time, waxes, and polyethylene need to be added simultaneously. In fact, the presence of the waxes reduces the polarity of the bitumen matrix and increases the affinity with the polymer promoting its dispersion. Results demonstrate that the chain length of the waxes, the form of the added waste polyethylene, and the blending protocol have critical effects on the time-evolution of such properties. Short-chain waxes have a detrimental impact on the rutting resistance regardless of the blending protocol. On the contrary, long-chain waxes improve the overall behavior of the polyethylene-modified binders and, in particular, the resistance to permanent deformations.

Description: As a common depressant, acidified water glass (AWG) has strong inhibitory effects on fluorite and calcite. The inhibited fluorite is difficult to be recovered, thus resulting in the waste of resources and low flotation efficiency. In this study, the interaction of fluoride ions with fluorite and calcite surfaces was investigated, and its effects of AWG adsorption on mineral surfaces were evaluated. Micro-flotation experiments indicated that the flotation recovery of fluorite is 88.72% after fluoride ion treatment, that is, approximately fourfold with respect to that without fluoride ion modification. The results of solution chemical calculations showed that SiO(OH)3 is the main component to inhibit fluorite, and Si(OH)4 is the main component to inhibit calcite in AWG solution. XPS and ICP-MS results showed that fluoride ions can improve the floatability of fluorite by converting CaSiO3 on the surface of fluorite into CaF2, but the conversion ability of Si(OH)4 on the surface of calcite is weak, which increases the difference in floatability between fluorite and calcite. The above results were further verified by the analysis of flotation foam image and contact angle measurement. After fluorine ion treatment, the contact angle of fluorite increased, and it was more easily adsorbed on the foam. Therefore, the interaction of the fluoride ion with the fluorite surfaces eliminated the adsorption of AWG on fluorite, thereby resulting in the enhanced hydrophobicity of fluorite. Different from the traditional metal ions modification, the idea of anion modification in this paper is expected to be further studied.

Description: Our research was designed to evaluate the effect on bone regeneration with 3-dimensional (3D) printed polylactic acid (PLA) and 3D printed polycaprolactone (PCL) scaffolds, determine the more effective option for enhancing bone regeneration, and offer tentative evidence for further research and clinical application. Employing the 3D printing technique, the PLA and PCL scaffolds showed similar morphologies, as confirmed via scanning electron microscopy (SEM). Mechanical strength was significantly higher in the PLA group (63.4 MPa) than in the PCL group (29.1 MPa) (p 〈 0.01). Average porosity, swelling ratio, and degeneration rate in the PCL scaffold were higher than those in the PLA scaffold. SEM observation after cell coculture showed improved cell attachment and activity in the PCL scaffolds. A functional study revealed the best outcome in the 3D printed PCL-TGF-β1 scaffold compared with the 3D printed PCL and the 3D printed PCL-Polydopamine (PDA) scaffold (p 〈 0.001). As confirmed via SEM, the 3D printed PCL- transforming growth factor beta 1 (TGF-β1) scaffold also exhibited improved cell adhesion after 6 h of cell coculture. The 3D printed PCL scaffold showed better physical properties and biocompatibility than the 3D printed PLA scaffold. Based on the data of TGF-β1, this study confirms that the 3D printed PCL scaffold may offer stronger osteogenesis.

Description: Global climatic changes have been observed for all natural biomes, with the greatest impact in the permafrost zone. The short series of direct observations of air temperature and precipitation from meteorological stations for this territory make it difficult to use them in studies of the impact of climate change on forest and forest-tundra ecosystems, but only longer series of gridded data expand the temporal-spatial resolution of this analysis. We compared local and gridded air temperature, precipitation and vapor pressure deficit (VPD) data, analyzed the trends of their changes over the last century for three sites in the permafrost zone (YAK and TAY in Russia, and CAN in Canada), and estimated the effect of their variability on oxygen isotopes in the tree-ring cellulose (δ18Ocell) of three different species (Larix cajanderi Mayr, Larix gmelinii Rupr. Rupr and Piceaglauca (Moench) Voss). Climate trend analysis showed strong changes after the 1980s, and even more pronounced from 2000 to 2020. We revealed that δ18Ocell-YAK showed mixed signals of the July temperature (r = 0.49; p = 0.001), precipitation (r = −0.37; p = 0.02) and vapor pressure deficit (VPD) (r = 0.31; p = 0.02), while δ18Ocell-CAN captured longer March–May (r = 0.37, p = 0.001) and July (r = 0.32, p 〈 0.05) temperature signals as well as spring VPD (r = 0.54, p = 0.001). The δ18Ocell-TAY showed a significant correlation with air temperature in July (r = 0.23, p = 0.04) and VPD in March (r = −0.26, p = 0.03). The obtained eco-hydrological relationships indicate the importance of temperature and moisture to varying degrees, which can be explained by site- and species-specific differences.

Description: The direct aerosol-radiative effects in the WRF-Chem model account for scattering/absorption of solar radiation due to aerosols, while aerosol–cloud interactions result in modifying wet scavenging of the ambient concentrations as an indirect aerosol effect. In this study, impact of aerosol on meteorological parameters, PM10 and ozone concentrations are analysed which revealed (i) that a net decrease in shortwave and longwave radiation by direct feedback results in decrease in temperature up to 0.05 K, (ii) that a net increase due to longwave and shortwave radiation when both direct and indirect effects are taken together results in an increase in temperature up to 0.25 K (where the mean of temperature is 33.5 °C and standard deviation 2.13 °C), (iii) a marginal increase in boundary layer height of 50 m with increase in temperature with feedbacks, (iv) overall net increase in radiation by direct and indirect effect together result in an increase in PM10 concentration up to 12 μg m−3 (with PM10 mean as 84.5 μg m−3 and standard deviation 28 μg m−3) and an increase in ozone concentration up to 3 μg m−3 (with ozone mean as 29.65 μg m−3 and standard deviation 5.2 μg m−3) mainly due to net increase in temperature. Furthermore, impact of sensitivity of different aerosol mechanisms on PM10 concentrations was scrutinized for two different mechanisms that revealed underestimation by both of the mechanisms with MOSAIC scheme, showing less fractional bias than MADE/SORGAM. For the dust storm period, MOSAIC scheme simulated higher mass concentrations than MADE/SORGAM scheme and performed well for dust-storm days while closely capturing the peaks of high dust concentrations. This study is one of the first few to demonstrate the impact of both direct and indirect aerosol feedback on local meteorology and air quality using a meteorology–chemistry modelling framework; the WRF-Chem model in a tropical urban airshed in India located in semi-arid climatic zone. It is inferred that semi-arid climatic conditions behave in a vastly different manner than other climatic zones for direct and indirect radiative feedback effects.

Description: Cordyceps militaris (C. militaris) has various biomedical applications in traditional oriental medicine for different diseases including inflammatory and immune-dysregulated diseases. It is a reservoir of nutritional components such as cordycepin, polysaccharides, and antioxidants. To improve its bioactivity, we fermented C. militaris with a Pediococcus pentosaceus strain isolated from a salted small octopus (SC11). The current study aimed to evaluate whether P. pentosaceus (SC11) fermentation could enhance the anti-allergic potential of C. militaris cultured on germinated Rhynchosia nulubilis (GRC) against a type I hypersensitive reaction in in vitro and in vivo studies. Total antioxidant capacity and cordycepin content were significantly increased in GRC after SC11 fermentation. GRC-SC11 showed significantly enhanced anti-allergic responses by inhibiting immunoglobulin E (IgE)/antigen-induced degranulation in RBL-2H3 cells, compared to GRC. The results demonstrated the significant inhibition of phosphorylated spleen tyrosine kinase (Syk)/ p38/GRB2-associated binding protein 2 (Gab2)/c-jun in IgE/Ag-triggered RBL-2H3 cells. Furthermore, suppressed mRNA levels of interleukin-4 (IL-4) and tumor necrosis factor-α (TNF-α) in IgE/Ag-activated RBL-2H3 cells were observed. GRC-SC11 significantly ameliorated IgE-induced allergic reactions by suppressing the ear swelling, vascular permeability, and inflammatory cell infiltration in passive cutaneous anaphylaxis (PCA) BALB/c mice. In conclusion, GRC fermented with P.pentosaceus exerted enhanced anti-allergic effects, and increased the cordycepin content and antioxidants potential compared to GRC. It can be used as bio-functional food in the prevention and management of type I allergic diseases.

Description: The gut microbiota is a crucial factor in maintaining homeostasis. The presence of commensal microorganisms leads to the stimulation of the immune system and its maturation. In turn, dysbiosis with an impaired intestinal barrier leads to accelerated contact of microbiota with the host’s immune cells. Microbial structural parts, i.e., pathogen-associated molecular patterns (PAMPs), such as flagellin (FLG), peptidoglycan (PGN), lipoteichoic acid (LTA), and lipopolysaccharide (LPS), induce inflammation via activation of pattern recognition receptors. Microbial metabolites can also develop chronic low-grade inflammation, which is the cause of many metabolic diseases. This article aims to systematize information on the influence of microbiota on chronic inflammation and the benefits of microbiota modification through dietary changes, prebiotics, and probiotic intake. Scientific research indicates that the modification of the microbiota in various disease states can reduce inflammation and improve the metabolic profile. However, since there is no pattern for a healthy microbiota, there is no optimal way to modify it. The methods of influencing microbiota should be adapted to the type of dysbiosis. Although there are studies on the microbiota and its effects on inflammation, this subject is still relatively unknown, and more research is needed in this area.

Description: This paper addresses one of the recognized barriers to the unrestricted adoption of Unmanned Aircraft (UA) in mainstream urban use—noise—and reviews existing approaches for estimating and mitigating this problem. The aircraft noise problem is discussed upfront in general terms by introducing the sound emission, propagation, and psychoacoustic effects. The propagation of sound in the atmosphere, which is the focus of this paper, is then analysed in detail to isolate the environmental and operational factors that predominantly influence the perceived noise on the ground, especially looking at large-scale low-altitude UA operations, such as in the envisioned Urban Air Mobility (UAM) concepts. The physics of sound propagation are presented, considering all attenuation effects and the anomalies due to Doppler and atmospheric effects, such as wind, thermal inversion, and turbulence. The analysis allows to highlight the limitations of current mainstream aircraft noise modelling and certification approaches and, in particular, their inadequacy in addressing the noise of UA and, more generally, UAM vehicles. This finding is important considering that, although reducing noise at the source has remained a priority for manufacturers to enable the scaling up of UAM and drone delivery operations in the near future, the impact of poorly considered propagation and psychoacoustic effects on the actual perceived noise on the ground is equally important for the same objective. For instance, optimizing the flight paths as a function of local weather conditions can significantly contribute to minimizing the impact of noise on communities, thus paving the way for the introduction of full-scale UAM operations. A more reliable and accurate modelling of noise ground signatures for both manned and unmanned low-flying aircraft will aid in identifying the real-time data stream requirements from distributed sensors on the ground. New developments in surrogate sound propagation models, more pervasive real-time sensor data, and suitable computing resources are expected to both yield more reliable and effective estimates of noise reaching the ground listeners and support a dynamic planning of flight paths.