Abstract
Stress waves propagate along vertical, radial and circumferential directions when a non-uniformly distributed load is applied at one end of a three-dimensional shaft. As a result, the receiving signals are usually mixed with undesired interference components, often featuring as high-frequency fluctuations. Previous studies have revealed that sectional geometry (shape and size) greatly affects the high-frequency interference. In this study, low strain dynamic testing on full-scale X-section concrete is conducted in order to investigate the influences of high-frequency interference on velocity responses at the pile head. Emphasis is placed on the frequency and peak value of interference waves at various receiving points. Additionally, the effects of the geometrical, and mechanical properties of the pile shaft on high-frequency interference are elaborated on through the three-dimensional finite element method. The results show that the measured wave is obscured by interference waves superposed by two types of high-frequency components. The modulus and cross-sectional area are contributing factors to the frequency and peak value of the interference waves. On the other hand, the position with the least interference is determined, to some extent, by the accurate shape of the X-section.
Similar content being viewed by others
References
Chai HY, Phoon KK and Zhang DJ (2010), “Effects of the Source on Wave Propagation in Pile Integrity Testing,” Journal of Geotechnical and Geoenvironmental Engineering, 136(9): 1200–1208.
Chow YK, Phoon KK, Chow WF and Wong KY (2003), “Low Strain Integrity Testing of Piles: Three-DimenSional Effects,” Journal of Geotechnical and Geoenvironmental Engineering, 129(11): 1057–1062.
Cui CY, Meng K, Liang Z, Xu C, Yang G and Zhang S (2018), “Effect of Radial Homogeneity on Low-Strain Integrity Detection of a Pipe Pile in a Viscoelastic Soil Layer,” International Journal of Distributed Sensor Networks, 14(10), https://doi.org/10.1177/1550147718806459.
Deeks A and Randolph M (1993), “Analytical Modelling of Hammer Impact for Pile Driving,” International Journal for Numerical and Analytical Methods in Geomechanics, 17(5): 279–302.
Deng ZY, Liu XR, Liu YQ, Liu SL, Han YF, Liu JH and Tu YL (2020), “Model Test and Numerical Simulation on the Dynamic Stability of the Bedding Rock Slope Under Frequent Microseisms,” Earthquake Engineering and Engineering Vibration, 19(4): 919–935. https://doi.org/10.1007/s11803-020-0604-8
Ding XM, Liu HL, Chu J and Cheng K (2015), “Time-Domain Solution for Transient Dynamic Response of a Large-Diameter Thin-Walled Pipe Pile,” Earthquake Engineering and Engineering Vibration, 14(2): 239–251.
Ding XM, Liu HL and Zhang B (2011), “High-Frequency Interference in Low Strain Integrity Testing of Large-Diameter Pipe Piles,” Science China Technological Sciences, 54(2): 420–430.
Ding XM, Luan LB, Zheng CJ, Mei GX and Zhou H (2020b), “An Analytical Solution for Wave Propagation in a Pipe Pile with Multiple Defects,” Acta Mech. Solida Sin., 33: 251–267. https://doi.org/10.1007/s10338-019-00123-5.
Ding XM, Qu LM, Yang JC and Wang CL (2020a), “Experimental Study on the Pile Group-Soil Vibration Induced by Railway Traffic Under the Inclined Bedrock Condition,” Acta Geotechnica, 15: 3613–3620.
Huang YH, Ni SH, Lo KF and Charng JJ (2010), “Assessment of Identifiable Defect Size in a Drilled Shaft Using Sonic Echo Method: Numerical Simulation,” Computers and Geotechnics, 37(6): 757–768.
Hussein MH and Goble GG (2004), “A Brief History of the Application of Stress-Wave Theory to Piles,” Current Practices and Future Trends in Deep Foundations, pp. 186–201.
Kouroussis G, Anastasopoulos I, Gazetas G and Verlinden O (2013), “Three-Dimensional Finite Element Modelling of Dynamic Pile-Soil-Pile Interaction in Time Domain,” Proceedings of 4th ECCOMAS Thematic Conference, Kos Island, Greece.
Lee S, Chow Y, Karunaratne G and Wong K (1988), “Rational Wave Equation Model For Pile-driving Analysis,” Journal of Geotechnical Engineering, 114(3): 306–325.
Li LC, Wu WB, Liu H and Lehane B (2021), “DEM Analysis of the Plugging Effect of Open-ended Pile During the Installation Process,” Ocean Engineering, 220: 108375.
Liao ST and Roesset JM (1997), “Dynamic Response of Intact Piles to Impulse Loads,” International Journal for Numerical and Analytical Methods in Geomechanics, 21(4): 255–275.
Lin Y, Sansalone M and Carino NJ (1991), “Impact-Echo Response of Concrete Shafts,” Geotechnical Testing Journal, 14(2): 121–137.
Liu QJ, Wu ZY and Vincent W Lee (2019), “Scattering and Reflection of SH Waves Around a Slope on an Elastic Wedged Space,” Earthquake Engineering and Engineering Vibration, 18(2): 255–266. https://doi.org/10.1007/s11803-019-0502-0
Liu X, El Naggar MH, Wang KH and Wu JT (2021), “Three-Dimensional Axisymmetric Analysis of Pile Vertical Vibration,” Journal of Sound and Vibration, 494: 115881.
Lv YR, Li X, Wang Y (2020), “Centrifuge and Numerical Modeling of Geometrical Effects on XCC Piled Rafts,” Soils and Foundations, 60(6): 1405–1421.
Lv YR, Liu HL, Ng CW, Ding XM and Gunawan A (2014a), “Three-Dimensional Numerical Analysis of the Stress Transfer Mechanism of XCC Piled Raft Foundation,” Computers and Geotechnics, 55: 365–377.
Lv YR, Liu HL, Ng CW, Gunawan A and Ding XM (2014b), “A Modified Analytical Solution of Soil Stress Distribution for XCC Pile Foundations,” Acta Geotechnica, 9(3): 529–546.
Ni SH, Lo KF, Lehmann L and Huang YH (2008), “Time-Frequency Analyses of Pile-Integrity Testing Using Wavelet Transform,” Computers and Geotechnics, 35(4): 600–607.
Niu TT, Liu HL, Ding XM and Zheng CJ (2018), “Model Tests on XCC-Piled Embankment Under Dynamic Train Load of High-Speed Railways,” Earthquake Engineering and Engineering Vibration, 17(3): 581–594.
Qu LM, Ding XM, Kouroussis G and Zheng CJ (2021b), “Dynamic Interaction of Soil and End-Bearing Piles in Sloping Ground: Numerical Simulation and Analytical Solution,” Computer and Geotechnics, 134: 103917.
Qu LM, Ding XM, Wu CR, Long YH and Yang JC (2020), “Effects of Topography on Dynamic Responses of Single Piles Under Vertical Cyclic Loading,” Journal of Mountain Science, 17(1): 230–243. https://doi.org/10.1007/s11629-019-5533-5
Qu, LM, Ding XM, Zheng CJ and Liu HL (2017), “An Analytical Solution for Wave Propagation in a Square Pile Due to Transient Point Load,” Computers and Geotechnics, 83: 77–82.
Qu LM, Ding XM, Zheng CJ, Wu CR and Cao GW (2021a), “Numerical and Test Study on Vertical Vibration Characteristics of Pile Group in Slope Soil Topography,” Earthquake Engineering and Engineering Vibration, 20(2): 373–390.
Qu LM, Yang CW, Ding XM, Kouroussis G and Zheng CJ (2021c), “A Continuum-Based Model on Axial Pile-head Dynamic Impedance in Inhomogeneous Soil,” Acta Geotechnica, 2021. https://doi.org/10.1007/s11440-021-01274-x
Rajib S, SH and Sekhar CD (2015), “Influence of Dynamic Soil-Pile Raft-Structure Interaction: An Experimental Approach,” Earthquake Engineering and Engineering Vibration, 14(4): 625–645.
Reza T, Mohsen I and Abbasali TG (2019), “A New Boundary Element Solution to Evaluate the Geometric Effects of the Canyon Site on the Displacement Response Spectrum,” Earthquake Engineering and Engineering Vibration, 18(2): 267–284. https://doi.org/10.1007/s11803-019-0503-z
Seitz J (1992), “Pile Integrity by Low Strain Impacts—A State of the Art,” F.B.J. Barends (Ed.), Proceedings of the 4th International Conference on the Application of the Sress-Wave Theory to Piles, the Hague, the Netherlands, A.A. Balkema, Rotterdam.
Smith EA (1962), “Pile-driving Analysis by the Wave Equation,” American Society of Civil Engineers Transactions.
Wu WB, Liu H, Yang X, Jiang GS, El Naggar, MH, Mei GX and Liang R (2020), “New Method to Calculate the Apparent Phase Velocity of Open-Ended Pipe Pile,” Canadian Geotechnical Journal, 57(1): 127–138.
Zhang YP, Liu H, Wu WB, Wang LX and Jiang GS (2021), “A 3D Analytical Model for Distributed Low Strain Test and Parallel Seismic Test of Pipe Piles,” Ocean Engineering, 225: 108828.
Zheng CJ, Liu HL, Ding XM, Kouretzis GP, Sloan SW and Poulos HG (2016), “Non-Axisymmetric Response of Piles in Low-Strain Integrity Testing,” Géotechnique, 67(2): 181–186.
Zhou H, Liu HL, Ding XM and Kong GQ (2020), “A p-y Curve Model for Laterally Loaded XCC Pile in Soft Clay,” Acta Geotechnica, 15: 3229–3242.
Acknowledgement
This work is supported by the National Natural Science Foundation of China (Grant Nos. 51622803 and 51878103), and China Postdoctoral Science Foundation (2021M692689).
Author information
Authors and Affiliations
Corresponding author
Additional information
Supported by
National Natural Science Foundation of China under Grant Nos. 51622803 and 51878103; China Postdoctoral Science Foundation under Grant No. 2021M692689
Rights and permissions
About this article
Cite this article
Qu, L., Fan, Y., Ding, X. et al. High-frequency interference waves in low strain dynamic testing of X-section concrete piles. Earthq. Eng. Eng. Vib. 20, 877–885 (2021). https://doi.org/10.1007/s11803-021-2057-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11803-021-2057-0