This retrospective study examines 248 test bolus examinations preceding contrast-enhanced magnetic resonance angiography (CE-MRA) to extract clinically relevant data for critical limb ischemia (CLI) management. The method involved a retrospective review of test bolus exams, analysing 60 graphs for time to peak (TTP), full-width half-maximum (FWHM) time, and time to continual rise in signal intensity. These values were correlated with heart function parameters (ejection fraction, ASA classification, Lee index, and MET score). The results indicate a mean TTP of 31.2 ± 7.3 s, showing a correlation between the ejection fraction and ASA classification. Patients with atrial fibrillation exhibited prolonged TTP compared to those without. Despite population heterogeneity, these findings facilitate risk stratification for limb-saving interventions in CLI. TTP emerges as a potential clinical cardiovascular parameter and a risk factor for vascular interventions. Given the variation in injection protocols across centres, this study underscores the importance of precise bolus arrival time documentation for future multicentre studies. Full article

SPME analysis of the scent of Epipactis microphylla showed the presence of limonene as the main component of the scent. Other components were 2,4,4,6,6,8,8-heptamethyl-1-nonene, pentadecane, and heptadecane. The scent of Epipactis palustris was characterized by pentadecane, 2,4,4,6,6,8,8-heptamethyl-1-nonene, and heptadecane. The scent of Neottia nidus avis showed the presence of kaur-16-ene as the main component of the scent. Other components were heinecosane, tetradecane, pentadecane, hexadecane, heptadecane, and 5,9,13-trimethyl-4,8,12-tetradecanal. The scent of Neottia ovata is due to pentadecane, hexadecane, and heptadecane. The scent of Limodorum abortivum showed the presence of 2,4,4,6,6,8,8-heptamethyl-1-nonene, pentadecane, hexadecane, heptadecane, and 2-(dodecyloxy)-ethanol. Full article

Epilepsy is characterized by recurring seizures that result from abnormal electrical activity in the brain. These seizures manifest as various symptoms including muscle contractions and loss of consciousness. The challenging task of detecting epileptic seizures involves classifying electroencephalography (EEG) signals into ictal (seizure) and interictal (non-seizure) classes. This classification is crucial because it distinguishes between the states of seizure and seizure-free periods in patients with epilepsy. Our study presents an innovative approach for detecting seizures and neurological diseases using EEG signals by leveraging graph neural networks. This method effectively addresses EEG data processing challenges. We construct a graph representation of EEG signals by extracting features such as frequency-based, statistical-based, and Daubechies wavelet transform features. This graph representation allows for potential differentiation between seizure and non-seizure signals through visual inspection of the extracted features. To enhance seizure detection accuracy, we employ two models: one combining a graph convolutional network (GCN) with long short-term memory (LSTM) and the other combining a GCN with balanced random forest (BRF). Our experimental results reveal that both models significantly improve seizure detection accuracy, surpassing previous methods. Despite simplifying our approach by reducing channels, our research reveals a consistent performance, showing a significant advancement in neurodegenerative disease detection. Our models accurately identify seizures in EEG signals, underscoring the potential of graph neural networks. The streamlined method not only maintains effectiveness with fewer channels but also offers a visually distinguishable approach for discerning seizure classes. This research opens avenues for EEG analysis, emphasizing the impact of graph representations in advancing our understanding of neurodegenerative diseases. Full article

Ferroelectric materials, with their spontaneous electric polarization, are renewing research enthusiasm for their deployment in high-performance micro/nano energy harvesting devices such as triboelectric nanogenerators (TENGs). Here, the introduction of ferroelectric materials into the triboelectric interface not only significantly enhances the energy harvesting efficiency, but also drives TENGs into the era of intelligence and integration. The primary objective of the following paper is to tackle the newest innovations in TENGs based on ferroelectric materials. For this purpose, we begin with discussing the fundamental idea and then introduce the current progress with TENGs that are built on the base of ferroelectric materials. Various strategies, such as surface engineering, either in the micro or nano scale, are discussed, along with the environmental factors. Although our focus is on the enhancement of energy harvesting efficiency and output power density by utilizing ferroelectric materials, we also highlight their incorporation in self-powered electronics and sensing systems, where we analyze the most favorable and currently accessible options in attaining device intelligence and multifunctionality. Finally, we present a detailed outlook on TENGs that are based on ferroelectric materials. Full article

Iron palaeometallurgy was carried out on three artefacts, classified as nails and excavated from the archaeological site of Loiola (La Arboleda, Biscay, northern Spain), to investigate Roman manufacturing techniques. Energy Dispersive Spectroscopy (EDS) coupled with Environmental Scanning Electron Microscopy (ESEM) and micro-Raman spectroscopy were used to obtain elemental composition and structural characterization of mineral phases. Metallurgical properties and crystallographic texture were studied by combining microscopic methods such as optical microscopy (OM), Electron Backscatter Diffraction realized in environmental mode (EBSD) and measurements of local Vickers microhardness. The three artefacts had different microstructures, distinguished by a large gradient of carbon content, although important segregations (inclusions) were observed in all of them. Two pearlite-rich artefacts showed a high density of structural defects (geometrically necessary dislocations and large crystallographic orientation gradients in pearlitic ferrite, curved pearlitic cementite) resulting from a high level of plastic deformation that occurred during the manufacturing process. The third artefact consisted of pure ferrite without structural defects. This one was clearly manufactured differently from the two others, so it probably had another functionality. Full article

As a consequence of climate change, temperature and rainfall regimes are being modified, threatening the survival of the current gardening concept in many areas of the world. This situation highlights the need to investigate the potential of other species, especially in more sensitive areas such as the Mediterranean Basin. The aim of this research is to study the resilience of adapted species to promote sustainable gardening. To achieve this, seven species belonging to three families (Amaranthaceae, Lamiaceae and Asteraceae) used or potentially used as ornamentals were selected to compare their tolerance at the germinative stage to different levels of temperature (10 °C to 35 °C) and water stress created by PEG 6000 (−0.10 MPa to −2.5 MPa). Germination percentage, mean germination time, base temperature, thermal time, base water potential and hydrotime were calculated. The results showed a good response to high temperature and low osmotic potential in most of the species, and germination even increased under certain stress levels. Salsola oppositifolia presented by far the best results in terms of germination under high-water-stress conditions and the second best at high temperatures. The extraordinary response of Celosia argentea, an alien species, highlighted the risk of it becoming an invasive species. Full article

The rapid advancement of wearable devices and flexible electronics has spurred an increasing need for high-performance, thin, lightweight, and flexible energy storage devices. In particular, thin and lightweight zinc-ion batteries require battery materials that possess exceptional flexibility and mechanical stability to accommodate complex deformations often encountered in flexible device applications. Moreover, the development of compact and thin battery structures is essential to minimize the overall size and weight while maintaining excellent electrochemical performance, including high energy density, long cycle life, and stable charge/discharge characteristics, to ensure their versatility across various applications. Researchers have made significant strides in enhancing the battery’s performance by optimizing crucial components such as electrode materials, electrolytes, separators, and battery structure. This review provides a comprehensive analysis of the design principles essential for achieving thinness in zinc-ion batteries, along with a summary of the preparation methods and potential applications of these batteries. Moreover, it delves into the challenges associated with achieving thinness in zinc-ion batteries and proposes effective countermeasures to address these hurdles. This review concludes by offering insights into future developments in this field, underscoring the continual advancements and innovations that can be expected. Full article

Xinjiang, as a climate-sensitive region in Northwest China, holds significant importance in studying extreme climate events for agricultural production and socioeconomic development. Using data spanning from 1960 to 2021 from 52 meteorological stations across Xinjiang, encompassing 23 indices of extreme climate events, the 5-year moving average, linear trend fitting, and inverse distance weighting (IDW) are used to analyze the distribution patterns and temporal changes in extreme climatic phenomena within the region. The results indicate that, over the period from 1960 to 2021, the Amplitude Temperature Index, Heat Index, and Warm Spell Duration Index in Xinjiang exhibited a marked increasing trend, whereas the Cold Index and Cold Spell Duration Index displayed a significant decreasing trend. The range of changes in the extreme temperature indices from 1990 to 2021 is higher than that of 1960 to 1989. The areas with high values of amplitude temperature extreme indices are primarily concentrated in the southern part, while the areas with high values of cold indices are mainly distributed in the northern part. The upward/downward trends all account for over 80.00% of the entire region. The precipitation scale indices, precipitation day indices, intense precipitation index, and extreme precipitation index all showed a significant growth trend from 1960 to 2021, and the range of change in the extreme precipitation indices from 1990 to 2021 was lower than that from 1960 to 1989. Furthermore, areas with high precipitation values and regions with high trend values of climate tendency are predominantly concentrated in the northern and western parts of Xinjiang, with over 71.00% of the entire region experiencing an upward trend. The research results provide theoretical foundations for formulating climate risk strategies in the northwest region of China. Full article

For two-dimensional forward-looking sonar imaging, high sidelobes significantly degrade the quality of sonar images. The cosine window function weighting method is often applied to suppress the sidelobe levels in the angular and range dimensions, at the expense of the main lobe resolutions. Therefore, an improved spatially variant apodization imaging method for forward-looking sonar is proposed, to reduce sidelobes without degrading the main lobe resolution in angular-range dimensions. The proposed method is a nonlinear postprocessing operation in which the raw complex-valued sonar image produced by a conventional beamformer and matched filter is weighted by a spatially variant coefficient. To enhance the robustness of the spatially variant apodization approach, the array magnitude and phase errors are calibrated to prevent the occurrence of beam sidelobe increase prior to beamforming operations. The analyzed results of numerical simulations and a lake experiment demonstrate that the proposed method can greatly reduce the sidelobes to approximately −40 dB, while the main lobe width remains unchanged. Moreover, this method has an extremely simple computational process. Full article

The deficiency of readily biodegradable organic carbon can be a significant limitation to effective nitrogen removal during wastewater denitrification. Waste-activated sludge (WAS) is a source of carbon produced directly at wastewater treatment plants (WWTPs). Raw WAS has a large molecular weight and complex chemical structure molecules that are not easily available for microorganisms. In this study, easily biodegradable organic fractions were released using pH control and/or nitrites and nitric acid (NO₂/FNA). The obtained results indicated that WAS can be a sufficient carbon source for denitrification in WWTPs that are at risk of minor effluent violations. The implementation of WAS disintegration with the use of pH control and NO₂/FNA allowed for the denitrification of an additional 0.5 and 0.8 mgN-NO₃/L. WAS disintegration, besides being a source of carbon generation, reduces the volume of sludge and leads to the implementation of a closed-loop system. Full article

Biocide resistance poses a significant challenge in industrial processes, with bacteria like Pseudomonas oleovorans exhibiting intrinsic resistance to traditional antimicrobial agents. In this study, the impact of biocide exposure on the metabolome of two P. oleovorans strains, namely, P. oleovorans P4A, isolated from contaminated coating material, and P. oleovorans 1045 reference strain, were investigated. The strains were exposed to 2-Methylisothiazol-3(2H)-one (MI) MIT, 1,2-Benzisothiazol-3(2H)-one (BIT), and 5-chloro-2-methyl-isothiazol-3-one (CMIT) at two different sub-inhibitory concentrations and the lipids and polar and semipolar metabolites were analyzed by ultra-high performance liquid chromatography quadrupole time-of-flight mass spectrometry UPLC–Q–TOF/MS. Exposure to the BIT biocide induced significant metabolic modifications in P. oleovorans. Notable changes were observed in lipid and metabolite profiles, particularly in phospholipids, amino acid metabolism, and pathways related to stress response and adaptation. The 1045 strain showed more pronounced metabolic alterations than the P4A strain, suggesting potential implications for lipid, amino acid metabolism, energy metabolism, and stress adaptation. Improving our understanding of how different substances interact with bacteria is crucial for making antimicrobial chemicals more effective and addressing the challenges of resistance. We observed that different biocides trigged significantly different metabolic responses in these strains. Our study shows that metabolomics can be used as a tool for the investigation of metabolic mechanisms underlying biocide resistance, and thus in the development of targeted biocides. This in turn can have implications in combating biocide resistance in bacteria such as P. oleovorans. Full article

With the advent of new sustainable construction materials, self-healing concrete has been used and tested in the last decade, raising the question of the efficacy of said mechanisms to prevent water permeation after crack formation. Thus, new novel mechanical methodologies have been introduced to induce controlled cracks in concrete specimens to improve the standardisation and effectiveness of permeability tests. This research explores those new mechanical techniques to create consistent and reproducible crack patterns, crucial for assessing the efficacy of self-healing mechanisms in concrete. This study systematically evaluates how different crack configurations influence the self-healing ability of the material. Findings from this research are expected to aid in refining testing protocols and to contribute significantly to the field of material science within civil engineering by demonstrating the potential of self-healing concrete to revolutionise building practices. Full article

Abstract: Precisely assessing the vulnerability of landslides is essential for effective risk assessment. The findings from such assessments will undoubtedly be in high demand, providing a solid scientific foundation for a range of critical initiatives aimed at disaster prevention and control. In the research, authors set the ancient core district of Sichuan Moxi Ancient Town as the research object; they conduct and give the final result of the geological survey. Fault influences are commonly utilized as key markers for delineating strata in the field of stratigraphy, and the slope distance, slope angle, slope aspect, elevation, terrain undulation, plane curvature, profile curvature, mean curvature, relative elevation, land use type, surface roughness, water influence, distance of the catchment, cumulative water volume, and the Normalized Vegetation Index (NDVI) are used along roads to calculate annual rainfall. With the purpose of the establishment of the evaluation system, there are 17 factors selected in total. Through the landslide-susceptibility assessment by the coupled models of DNN-I-SVM and DNN-I-LR nine factors had been selected; it was found that the Area Under the Curve (AUC) value of the Receiver Operating Characteristic Curve (ROC) was high, and the accuracy of the model is relatively high. The coupler, DNN-I-LR, gives 0.875 of an evaluation accuracy of AUC, higher than DNN-I-SVM, which yielded 0.860. It is necessary to note that, in this region, compared to the DNN-I-SVM model, the DNN-I-LR coupling model has better fitting and prediction abilities. Full article

Cancer treatment is a significant focus in medicine, owing to the increasing global incidence of cancers. Patients with advanced cancers that do not respond to conventional therapies have limited options and an unfavorable prognosis. Consequently, researchers are investigating complementary approaches to conventional treatments. One such approach is alkalization therapy, which aims to neutralize the acidic tumor microenvironment (TME) by increasing its pH level. The acidic TME promotes inflammation, tumor progression, and drug resistance. Alkalization therapy has been demonstrated to be effective for various cancers. In addition, natural products, such as triterpenoids, parthenolides, fulvic acid, Taxus yunnanensis, and apple pectin have the potential to alleviate symptoms, maintain physical fitness, and improve treatment outcomes of cancer patients through their anti-inflammatory, antioxidant, and anticancer properties. In this review, we focus on the effects of alkalization therapy and natural products on cancer. Furthermore, we present a case series of advanced cancer patients who received alkalization therapy and natural products alongside standard treatments, resulting in long-term survival. We posit that alkalization therapy together with supplementation with natural products may confer benefits to cancer patients, by mitigating the side effects of chemotherapy and complementing standard treatments. However, further research is warranted to validate these clinical findings. Full article

Very little is known about the preservation and storage of fresh medicinal and aromatic plants (MAPs) and/or herbs. As with many leafy vegetables, i.e., lettuce, fresh spearmint is a very perishable product throughout the production line and requires special handling/processing. The current study aimed to examine the antibacterial activity of selected MAPs (Origanum dubium, Salvia fruticosa and Sideritis cypria) grown in Cyprus towards foodborne pathogens. Then, the most effective MAPs’ essential oil (EO) and hydrosol (at different doses; combination of concentration and time of dipping submerge) were tested to preserve fresh spearmint quality and safety. The results showed that O. dubium EO and hydrosol presented great in vitro antibacterial activity against four foodborne pathogens and those products were further selected for application on fresh spearmint. During sensory evaluation, it was observed that higher O. dubium EO concentrations and longer time of application resulted into a less marketable product (less acceptable with less spearmint-like aroma), while hydrosol resulted in a more marketable product even at high doses. In general, EO and hydrosol applications increased spearmint’s antioxidants (including polyphenols, flavonoids, and ascorbic acid), resulting in a product of increased nutritional value. The bacterial populations of Salmonella enterica and Listeria monocytogenes inoculated on fresh spearmint were decreased with the EO and hydrosol application doses applied, and their effects were evident even after six days of storage at 4 °C. From the findings of this study, it can be concluded that O. dubium EO and hydrosol could be a potential sanitation method for fresh spearmint preservation. Full article

This paper reports the results of our study on electrochemical polishing of titanium and a Ti-based alloy using non-aqueous electrolyte. It was shown that electropolishing ensured the removal of surface defects, thereby providing surface smoothing and decreasing surface roughness. The research was conducted using samples made of titanium and Ti₆Al₄V alloy, as well as implant system elements: implant analog, multiunit, and healing screw. Electropolishing was carried out under a constant voltage (10–15 V) with a specified current density. The electrolyte used contained methanol and sulfuric acid. The modified surface was subjected to a thorough analysis regarding its surface morphology, chemical composition, and physicochemical properties. Scanning electron microscope images and profilometer tests of roughness confirmed significantly smoother surfaces after electropolishing. The surface profile analysis of processed samples also yielded satisfactory results, showing less imperfections than before modification. The EDX spectra showed that electropolishing does not have significant influence on the chemical composition of the samples. Full article

Introduction: Hairy-cell leukemia (HCL) is a rare B-cell chronic lymphoproliferative disorder (B-CLPD), whose favorable prognosis has changed with the use of purine nucleoside analogs (PNAs), such as cladribine (CDA) or pentostatin (P). However, some patients eventually relapse and over time HCL becomes resistant to chemotherapy. Many discoveries have been made in the pathophysiology of HCL during the last decade, especially in genomics, with the identification of the BRAF^V600E mutation and cellular biology, including the importance of signaling pathways as well as tumor microenvironment. All of these new developments led to targeted treatments, especially BRAF inhibitors (BRAFis), MEK inhibitors (MEKis), Bruton’s tyrosine kinase (BTK) inhibitors (BTKis) and recombinant anti-CD22 immunoconjugates. Results: The following major changes or additions were introduced in these updated guidelines: the clinical relevance of the changes in the classification of splenic B-cell lymphomas and leukemias; the increasingly important diagnostic role of BRAF^V600E mutation; and the prognostic role of the immunoglobulin (IG) variable (V) heavy chain (H) (IGHV) mutational status and repertory. We also wish to insist on the specific involvement of bones, skin, brain and/or cerebrospinal fluid (CSF) of the disease at diagnosis or during the follow-up, the novel targeted drugs (BRAFi and MEKi) used for HCL treatment, and the increasing role of minimal residual disease (MRD) assessment. Conclusion: Here we present recommendations for the diagnosis of HCL, treatment in first line and in relapsed/refractory patients as well as for HCL-like disorders including HCL variant (HCL-V)/splenic B-cell lymphomas/leukemias with prominent nucleoli (SBLPN) and splenic diffuse red pulp lymphoma (SDRPL). Full article

In industrial production, the deformation inhomogeneity after metal forging affects the mechanical properties of various parts of the forgings. The question of whether the organization and mechanical properties of β-titanium alloy can be improved by controlling the amount of forging deformation needs to be answered. Therefore, in this paper, a new sub-stable β-Ti alloy TB 18 (Ti-5.3Cr-4.9Mo4.9V-4.3Al-0.9Nb-0.3Fe) was subjected to three different levels of deformation, as well as solid solution-aging treatments, and the variation rules of microstructure and mechanical properties were investigated. During the solid solution process, the texture evolution pattern of the TB18 alloy at low deformation (20–40%) is mainly rotational cubic texture deviated into α-fiber texture; at high deformation (60%), the main components of the deformed texture are α-fiber texture with a specific orientation of (114)<1$\stackrel{\mathrm{-}}{13}$3>. After subsequent static recrystallization, the α-fiber texture is deviated to an α*-fiber texture, while the specific orientation (114)<1$\stackrel{\mathrm{-}}{13}$3> can still be inherited as a major component of the recrystallized texture. The plasticity of the alloy in the normal direction (ND) after the solid solution is influenced by the existence of the <110>//ND texture, and the plasticity of the alloy in the ND direction after aging is determined by a combination of the volume fraction of the <110>//ND texture in the matrix phase and the volume fraction of [11$\stackrel{\mathrm{-}}{2}$0]_α//ND in the α phase. The results show that it is feasible to change the characteristics of the recrystallization texture of TB18 by controlling the deformation level of hot forging, thus realizing the modulation of the mechanical properties. Full article

Pultrusion is a highly efficient continuous process to manufacture advanced fiber-reinforced composites. The injection pultrusion variant permits a higher control of the resin flow, enabling the manufacturing of a high reinforcement volume fraction. Moreover, it reduces the emission of volatile compounds that are dangerous for the operators and for the working environment. The present study proposes an experimental analysis of injection pultrusion in three different operative conditions. In particular, the activity focused on the effects of the temperature setup on the thermochemical and rheological behaviors of the resin system and on the interaction between the processed materials and the pultrusion die wall. The setup of the parameters was selected to evidence the behavior of the viscous interaction during the thermoset transition to the solid state, which is particularly challenging due to the localization of high adhesive forces related to the sharp increase in resin viscosity. Microscope observations of the cross-sections were performed to discuss the effects of the process parameters. Full article

3D-printable composites have become an attractive option used for the design and manufacture of electrochemical sensors. However, to ensure proper charge-transfer kinetics at the electrode/electrolyte interface, activation is often required, with this step consisting of polymer removal to reveal the conductive nanofiller. In this work, we present a novel effective method for the activation of composites consisting of poly(lactic acid) filled with carbon black (CB-PLA) using microwave radiation. A microwave synthesizer used in chemical laboratories (CEM, Matthews, USA) was used for this purpose, establishing that the appropriate activation time for CB-PLA electrodes is 15 min at 70 °C with a microwave power of 100 W. However, the usefulness of an 80 W kitchen microwave oven is also presented for the first time and discussed as a more sustainable approach to CB-PLA electrode activation. It has been established that 10 min in a kitchen microwave oven is adequate to activate the electrode. The electrochemical properties of the microwave-activated electrodes were determined by electrochemical techniques, and their topography was characterized using scanning electron microscopy (SEM), Raman spectroscopy, and contact-angle measurements. This study confirms that during microwave activation, PLAs decompose to uncover the conductive carbon-black filler. We deliver a proof-of-concept of the utility of kitchen microwave-oven activation of a 3D-printed, free-standing electrochemical cell (FSEC) in paracetamol electroanalysis in aqueous electrolyte solution. We established satisfactory limits of linearity for paracetamol detection using voltammetry, ranging from 1.9 μM to 1 mM, with a detection limit (LOD) of 1.31 μM. Full article

Catalytic combustion of volatile organic compounds (VOCs) usually requires external energy input to hold the desired reaction temperature via electric heating. This work presents an example of internal onsite heating of the catalytic active sites via hydrogen catalytic combustion with air over a conventional Pd/Al₂O₃ catalyst. Hydrogen combustion was ignited by the catalyst at room temperature without electric heating, and thus the temperatures were readily varied with the concentrations of H₂. Representative oxygenated VOCs such as methanol, formaldehyde and formic acid can be completely oxidized into CO₂ and water by co-feeding with H₂ below its low explosion limit of 4% using Pd/Al₂O₃ as shared catalyst. The catalytic performance apparently is not sensitive to the sizes of Pd nanoparticles in fresh and spent states, as revealed by XRD and STEM. This provides an option for using renewable green hydrogen to eliminate VOC pollutants in an energy-efficient way. Full article

We present two magnetic particle imaging (MPI) systems with bore sizes of 75 mm and 100 mm, respectively, using three-dimensionally arranged permanent magnets for excitation and frequency mixing magnetic detection (FMMD) coils for detection. A rotational and a translational stage were combined to move the field free line (FFL) and acquire the MPI signal, thereby enabling simultaneous overall translation and rotational movement. With this concept, the complex coil system used in many MPI systems, with its high energy consumption to generate the drive field, can be replaced. The characteristic signal of superparamagnetic iron oxide (SPIO) nanoparticles was generated via movement of the FFL and acquired using the FMMD coil. The positions of the stages and the occurrence of the f₁ + 2f₂ harmonics were mapped to reconstruct the spatial location of the SPIO. Image reconstruction was performed using Radon and inverse Radon transformations. As a result, the presented method based on mechanical movement of permanent magnets can be used to measure the MPI, even for samples as large as 100 mm. Our research could pave the way for further technological developments to make the equipment human size, which is one of the ultimate goals of MPI. Full article