Journal Description
Gels
Gels
is an international, peer-reviewed, open access journal on physical and chemical gels published monthly online by MDPI.
- Open Access— free for readers, with article processing charges (APC) paid by authors or their institutions.
- High visibility: indexed within Scopus, SCIE (Web of Science), PubMed, PMC, CAPlus / SciFinder, and other databases.
- Journal Rank: JCR - Q1 (Polymer Science)
- Rapid Publication: manuscripts are peer-reviewed and a first decision is provided to authors approximately 11.1 days after submission; acceptance to publication is undertaken in 2.7 days (median values for papers published in this journal in the second half of 2023).
- Recognition of Reviewers: reviewers who provide timely, thorough peer-review reports receive vouchers entitling them to a discount on the APC of their next publication in any MDPI journal, in appreciation of the work done.
- Testimonials: See what our editors and authors say about the Gels.
Impact Factor:
4.6 (2022);
5-Year Impact Factor:
5.2 (2022)
Latest Articles
In Vivo Evaluation of Wound Healing Efficacy of Gel-Based Dressings Loaded with Pycnogenol™ and Ceratothoa oestroides Extracts
Gels 2024, 10(4), 233; https://doi.org/10.3390/gels10040233 - 28 Mar 2024
Abstract
Ceratothoa oestroides and French maritime pine bark (Pycnogenol™) extracts are considered promising therapeutic agents in wound healing. This study explores the healing efficacy of composite dressings containing these extracts, aiming to enhance their stability and effectiveness, utilizing a low-temperature vacuum method for producing
[...] Read more.
Ceratothoa oestroides and French maritime pine bark (Pycnogenol™) extracts are considered promising therapeutic agents in wound healing. This study explores the healing efficacy of composite dressings containing these extracts, aiming to enhance their stability and effectiveness, utilizing a low-temperature vacuum method for producing Sodium Alginate—Maltodextrin gel dressings. Surgical wounds were inflicted on SKH-hr2 hairless mice. Dressings were loaded with Pycnogenol™ and/or C. oestroides extracts and assessed for their efficacy. Wound healing was primarily evaluated by clinical and histopathological evaluation and secondarily by Antera 3D camera and biophysical measurements. Dressings were stable and did not compromise the therapeutic properties of C. oestroides extract. All interventions were compared to the C. oestroides ointment as a reference product. Most of the wounds treated with the reference formulation and the C. oestrodes dressing had already closed by the 15th day, with histological scores of 7 and 6.5, respectively. In contrast, wounds treated with Pycnogenol™, either alone or in combination with C. oestroides, did not close by the end of the experiment (16th day), with histological scores reaching 15 in both cases. Furthermore, treatment with 5% Pycnogenol™ dressing appeared to induce skin thickening and increase body temperature. The study underscores the wound healing potential of C. oestroides extracts and highlights the need for further research to optimize Pycnogenol™ dosing in topical applications.
Full article
(This article belongs to the Special Issue Gel-Based Novel Wound Dressing)
Open AccessArticle
Evaluation of the Swelling Properties and Sorption Capacity of Maltodextrin-Based Cross-Linked Polymers
by
Claudio Cecone, Gjylije Hoti, Fabrizio Caldera, Marco Ginepro, Adrián Matencio and Francesco Trotta
Gels 2024, 10(4), 232; https://doi.org/10.3390/gels10040232 - 28 Mar 2024
Abstract
The development of polymers obtained from renewable sources such as polysaccharides has gained scientific and industrial attention. Cross-linked bio-derived cationic polymers were synthesized via a sustainable approach exploiting a commercial maltodextrin product, namely, Glucidex 2®, as the building block, while diglycidyl
[...] Read more.
The development of polymers obtained from renewable sources such as polysaccharides has gained scientific and industrial attention. Cross-linked bio-derived cationic polymers were synthesized via a sustainable approach exploiting a commercial maltodextrin product, namely, Glucidex 2®, as the building block, while diglycidyl ethers and triglycidyl ethers were used as the cross-linking agents. The polymer products were characterized via FTIR-ATR, TGA, DSC, XRD, SEM, elemental analysis, and zeta-potential measurements, to investigate their composition, structure, and properties. Polydispersed amorphous granules displaying thermal stabilities higher than 250 °C, nitrogen contents ranging from 0.8 wt % and 1.1 wt %, and zeta potential values between 10 mV and 15 mV were observed. Subsequently, water absorption capacity measurements ranging from 800% to 1500%, cross-linking density determination, and rheological evaluations demonstrated the promising gel-forming properties of the studied systems. Finally, nitrate, sulfate, and phosphate removal tests were performed to assess the possibility of employing the studied polymer products as suitable sorbents for water remediation. The results obtained from the ion chromatography technique showed high sorption rates, with 80% of nitrates, over 90% of sulfates, and total phosphates removal.
Full article
(This article belongs to the Special Issue Polysaccharide Gels and Beyond: From the Synthesis to Application)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Functionalized Gelatin/Polysaccharide Hydrogels for Encapsulation of Hepatocytes
by
Christian Willems, Fangdi Qi, Marie-Luise Trutschel and Thomas Groth
Gels 2024, 10(4), 231; https://doi.org/10.3390/gels10040231 - 28 Mar 2024
Abstract
Liver diseases represent a considerable burden to patients and healthcare systems. Hydrogels play an important role in the engineering of soft tissues and may be useful for embedding hepatocytes for different therapeutic interventions or the development of in vitro models to study the
[...] Read more.
Liver diseases represent a considerable burden to patients and healthcare systems. Hydrogels play an important role in the engineering of soft tissues and may be useful for embedding hepatocytes for different therapeutic interventions or the development of in vitro models to study the pathogenesis of liver diseases or testing of drugs. Here, we developed two types of hydrogels by crosslinking hydrazide-functionalized gelatin with either oxidized dialdehyde hyaluronan or alginate through the formation of hydrazone bonds. Gel formulations were studied through texture analysis and rheometry, showing mechanical properties comparable to those of liver tissue while also demonstrating long-term stability. The biocompatibility of hydrogels and their ability to host hepatocytes was studied in vitro in comparison to pure gelatin hydrogels crosslinked by transglutaminase using the hepatocellular line HepG2. It was found that HepG2 cells could be successfully embedded in the hydrogels, showing no signs of gel toxicity and proliferating in a 3D environment comparable to pure transglutaminase cross-linked gelatin hydrogels used as control. Altogether, hydrazide gelatin in combination with oxidized polysaccharides makes stable in situ gelling systems for the incorporation of hepatocytes, which may pave the way for use in liver tissue engineering and drug testing.
Full article
(This article belongs to the Special Issue Advances in Hydrogels for Tissue Engineering)
►▼
Show Figures
Graphical abstract
Open AccessArticle
The Impact of Ar or N2 Atmosphere on the Structure of Bi-Fe-Carbon Xerogel Based Composites as Electrode Material for Detection of Pb2+ and H2O2
by
Carmen I. Fort, Mihai M. Rusu, Liviu C. Cotet, Adriana Vulpoi, Milica Todea, Monica Baia and Lucian Baia
Gels 2024, 10(4), 230; https://doi.org/10.3390/gels10040230 - 28 Mar 2024
Abstract
In this study, bismuth- and iron-embedded carbon xerogels (XG) were obtained using a modified resorcinol formaldehyde sol–gel synthesis method followed by additional enrichment with iron content. Pyrolysis treatment was performed at elevated temperatures under Ar or N2 atmosphere to obtain nanocomposites with
[...] Read more.
In this study, bismuth- and iron-embedded carbon xerogels (XG) were obtained using a modified resorcinol formaldehyde sol–gel synthesis method followed by additional enrichment with iron content. Pyrolysis treatment was performed at elevated temperatures under Ar or N2 atmosphere to obtain nanocomposites with different reduction yields (XGAr or XGN). The interest was focused on investigating the extent to which changes in the pyrolysis atmosphere of these nanocomposites impact the structure, morphology, and electrical properties of the material and consequently affect the electroanalytical performance. The structural and morphological particularities derived from X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) measurements revealed the formation of the nanocomposite phases, mostly metal/oxide components. The achieved performances for the two modified electrodes based on XG treated under Ar or N2 atmosphere clearly differ, as evidenced by the electroanalytical parameters determined from the detection of heavy metal cations (Pb2+) or the use of the square wave voltammetry (SWV) technique, biomarkers (H2O2), or amperometry. By correlating the differences obtained from electroanalytical measurements with those derived from morphological, structural, and surface data, a few utmost important aspects were identified. Pyrolysis under Ar atmosphere favors a significant increase in the α-Fe2O3 amount and H2O2 detection performance (sensitivity of 0.9 A/M and limit of detection of 0.17 μM) in comparison with pyrolysis under N2 (sensitivity of 0.5 A/M and limit of detection of 0.36 μM), while pyrolysis under N2 atmosphere leads to an increase in the metallic Bi amount and Pb2+ detection performance (sensitivity of 8.44 × 103 A/M and limit of detection of 33.05 pM) in comparison with pyrolysis under Ar (sensitivity of 6.47·103 A/M and limit of detection of 46.37 pM).
Full article
(This article belongs to the Special Issue Application of Gel Technology in Food Industry and Environmental Engineering)
►▼
Show Figures
Figure 1
Open AccessArticle
The Influence of Lyophilization Pretreatment and Whey Content on Whey and Gelatin-Based Hydrogels
by
Pompilia Mioara Lopes, Radu Fechete, Felicia Minteuan, Liviu Mare, Dumitrița Moldovan, Marioara Moldovan, Stanca Cuc, Codruța Liana Saroși and Violeta Popescu
Gels 2024, 10(4), 229; https://doi.org/10.3390/gels10040229 - 28 Mar 2024
Abstract
Whey and gelatin, natural polymers within the protein category, find widespread use in hydrogel formulations applied across the food, medical, and pharmaceutical industries. This study presents new characteristics of hydrogels based on whey, gelatin, and copper sulfate as a consequence of the additional
[...] Read more.
Whey and gelatin, natural polymers within the protein category, find widespread use in hydrogel formulations applied across the food, medical, and pharmaceutical industries. This study presents new characteristics of hydrogels based on whey, gelatin, and copper sulfate as a consequence of the additional steps in the preparation method, specifically refrigeration and freezing storage followed by lyophilization. The water state in hydrogels prior to lyophilization impacts the morphological appearance, with refrigerated hydrogels exhibiting a more regular and dense pore distribution, as shown by the Scanning Electron Microscopy (SEM) images. This observation aligns with the higher mobility of polymer chains indicated by T2 distributions in 1H nuclear magnetic resonance (RMN) relaxometry measurements. Changes in the intensity and amide-specific wavenumbers of the FTIR spectra of whey and gelatin proteins are evident in the Fourier Transformed Infrared (FTIR) spectra of crosslinked and frozen hydrogels before lyophilization. Moreover, the reinforcing effect in the hydrogel matrix, noted in mechanical tests, is attributed to increased polymer chain content and copper sulfate crosslinking.
Full article
(This article belongs to the Special Issue Application of Gel Technology in Food Industry and Environmental Engineering)
►▼
Show Figures
Figure 1
Open AccessArticle
Green Extraction of Pectin from Sugar Beet Flakes and Its Application in Hydrogels and Cryogels
by
Florina Dranca and Silvia Mironeasa
Gels 2024, 10(4), 228; https://doi.org/10.3390/gels10040228 - 27 Mar 2024
Abstract
Sugar beet flakes, a by-product of the sugar industry, were used as a source for pectin extraction that was performed using conventional citric acid extraction (CE) and two non-conventional extraction techniques—microwave-assisted extraction (MAE) and pulsed ultrasound-assisted extraction (PUAE). The influence of extraction conditions
[...] Read more.
Sugar beet flakes, a by-product of the sugar industry, were used as a source for pectin extraction that was performed using conventional citric acid extraction (CE) and two non-conventional extraction techniques—microwave-assisted extraction (MAE) and pulsed ultrasound-assisted extraction (PUAE). The influence of extraction conditions was studied for each technique based on pectin yield and galacturonic acid content, and spectroscopic, chromatographic and colorimetric methods were used for pectin characterization. Better results for pectin yield were achieved through CE (20.80%), while higher galacturonic acid content was measured in pectin extracted using PUAE (88.53 g/100 g). Pectin extracted using PUAE also presented a higher degree of methylation and acetylation. A significant increase in the molecular weight of pectin was observed for the PUAE process (7.40 × 105 g/mol) by comparison with conventional extraction (1.18 × 105 g/mol). Hydrogels and cryogels prepared with pectin from sugar beet flakes also showed differences in physicochemical parameters determined by the method of pectin extraction. Hydrogels had higher bulk density values irrespective of the pectin extraction method, and overall lower values of the textural parameters. Cryogels prepared with pectin from CE showed higher values of the textural parameters of hardness, adhesiveness, cohesiveness, gumminess and chewiness, while gels obtained with pectin from MAE and PUAE had higher thermal stability. The results of this study prove that sugar beet flakes can be considered a potential source for pectin production, and the extracted pectin is suitable for obtaining hydrogels and cryogels with physicochemical parameters comparable to the commercial citrus and apple pectin available on the market.
Full article
(This article belongs to the Special Issue Application of Gel Technology in Food Industry and Environmental Engineering)
►▼
Show Figures
Figure 1
Open AccessArticle
Chitosan–Oxidized Pullulan Hydrogels Loaded with Essential Clove Oil: Synthesis, Characterization, Antioxidant and Antimicrobial Properties
by
Dana Mihaela Suflet, Marieta Constantin, Irina Mihaela Pelin, Irina Popescu, Cristina M. Rimbu, Cristina Elena Horhogea and Gheorghe Fundueanu
Gels 2024, 10(4), 227; https://doi.org/10.3390/gels10040227 - 26 Mar 2024
Abstract
Emulsion hydrogels are promising materials for encapsulating and stabilizing high amounts of hydrophobic essential oils in hydrophilic matrices. In this work, clove oil-loaded hydrogels (CS/OP-C) are synthesized by combining covalent and physical cross-linking approaches. First, clove oil (CO) was emulsified and stabilized in
[...] Read more.
Emulsion hydrogels are promising materials for encapsulating and stabilizing high amounts of hydrophobic essential oils in hydrophilic matrices. In this work, clove oil-loaded hydrogels (CS/OP-C) are synthesized by combining covalent and physical cross-linking approaches. First, clove oil (CO) was emulsified and stabilized in a chitosan (CS) solution, which was further hardened by Schiff base covalent cross-linking with oxidized pullulan (OP). Second, the hydrogels were subjected to freeze–thaw cycles and, as a result, the clove oil was stabilized in physically cross-linked polymeric walls. Moreover, due to cryogelation, the obtained hydrogels exhibited sponge-like porous interconnected morphology (160–250 µm). By varying the clove oil content in the starting emulsion and the degree of cross-linking, the hydrogels displayed a high water retention capacity (swelling ratios between 1300 and 2000%), excellent elastic properties with fast shape recovery (20 s) after 70% compression, and controlled in vitro clove oil release in simulated skin conditions for 360 h. Furthermore, the prepared clove oil-loaded hydrogels had a strong scavenging activity of 83% and antibacterial and antifungal properties, showing a bacteriostatic effect after 48 and 72 h against S. aureus and E. coli. Our results recommend the new clove oil-embedded emulsion hydrogels as promising future materials for application as wound dressings.
Full article
(This article belongs to the Special Issue Gel-Based Materials: Preparations and Characterization (2nd Edition))
►▼
Show Figures
Graphical abstract
Open AccessArticle
The Influence of Gamma Radiation on Different Gelatin Nanofibers and Gelatins
by
Carmen Gaidau, Maria Râpă, Gabriela Ionita, Ioana Rodica Stanculescu, Traian Zaharescu, Rodica-Roxana Constantinescu, Andrada Lazea-Stoyanova and Maria Stanca
Gels 2024, 10(4), 226; https://doi.org/10.3390/gels10040226 - 26 Mar 2024
Abstract
Gelatin nanofibers are known as wound-healing biomaterials due to their high biocompatible, biodegradable, and non-antigenic properties compared to synthetic-polymer-fabricated nanofibers. The influence of gamma radiation doses on the structure of gelatin nanofiber dressings compared to gelatin of their origin is little known, although
[...] Read more.
Gelatin nanofibers are known as wound-healing biomaterials due to their high biocompatible, biodegradable, and non-antigenic properties compared to synthetic-polymer-fabricated nanofibers. The influence of gamma radiation doses on the structure of gelatin nanofiber dressings compared to gelatin of their origin is little known, although it is very important for the production of stable bioactive products. Different-origin gelatins were extracted from bovine and donkey hides, rabbit skins, and fish scales and used for fabrication of nanofibers through electrospinning of gelatin solutions in acetic acid. Nanofibers with sizes ranging from 73.50 nm to 230.46 nm were successfully prepared, thus showing the potential of different-origin gelatin by-products valorization as a lower-cost alternative to native collagen. The gelatin nanofibers together with their origin gelatins were treated with 10, 20, and 25 kGy gamma radiation doses and investigated for their structural stability through chemiluminescence and FTIR spectroscopy. Chemiluminescence analysis showed a stable behavior of gelatin nanofibers and gelatins up to 200 °C and increased chemiluminescent emission intensities for nanofibers treated with gamma radiation, at temperatures above 200 °C, compared to irradiated gelatins and non-irradiated nanofibers and gelatins. The electron paramagnetic (EPR) signals of DMPO adduct allowed for the identification of long-life HO● radicals only for bovine and donkey gelatin nanofibers treated with a 20 kGy gamma radiation dose. Microbial contamination with aerobic microorganisms, yeasts, filamentous fungi, Staphylococcus aureus, Escherichia coli, and Candida albicans of gelatin nanofibers treated with 10 kGy gamma radiation was under the limits required for pharmaceutical and topic formulations. Minor shifts of FTIR bands were observed at irradiation, indicating the preservation of secondary structure and stable properties of different-origin gelatin nanofibers.
Full article
(This article belongs to the Special Issue Gel-Based Novel Wound Dressing)
►▼
Show Figures
Figure 1
Open AccessArticle
Design and Properties of Novel Hydrophobic Natural Tea Saponin and Its Organogels
by
Maogong Wang, Liuxin Yan, Xuying Guo, Xinwei Xing, Fengqian Liang, Chunrui Han and Liujun Liu
Gels 2024, 10(4), 225; https://doi.org/10.3390/gels10040225 - 26 Mar 2024
Abstract
It was first discovered that the excellent gelation ability of tea saponin can be obtained by introducing long-chain alkyl groups of dodecanoyl chloride into the glycosyl portion with direct esterification. The modified dodecanoyl chloride–tea saponin (DC-TS) was successfully synthesized and characterized with NMR,
[...] Read more.
It was first discovered that the excellent gelation ability of tea saponin can be obtained by introducing long-chain alkyl groups of dodecanoyl chloride into the glycosyl portion with direct esterification. The modified dodecanoyl chloride–tea saponin (DC-TS) was successfully synthesized and characterized with NMR, MS, and FT-IR. The tests showed that the long-chain alkyl group was successfully introduced. Combined with SEM and X-ray diffraction patterns, we found that the stable lamellar shape gels of DC-TS were formed in a variety of solvents. More interestingly, organogel was also obtained by adjusting good solvent and poor solvent as mixed solvent. It is worth noting that the driving force of organogels is the combination of hydrogen bonding and the hydrophobic interaction of the introduced alkyl chains with the rigid backbone of pentacyclic triterpenes. The modified tea saponin, a natural green surfactant, was discovered to have gelation properties, which has broadened tea saponin’s scope of application and made it more promising.
Full article
(This article belongs to the Section Gel Analysis and Characterization)
►▼
Show Figures
Figure 1
Open AccessArticle
An Innovative High-Strength Double-Network Hydrogel for Use as a Drilling Fluid Plugging Agent
by
Yanfeng He, Jing Guo, Jinmei Bai, Le Hua, Yisong Zhang, Zhiqiang Huang, Letian Pan and Zhan Hong
Gels 2024, 10(4), 224; https://doi.org/10.3390/gels10040224 - 25 Mar 2024
Abstract
The problem of wellbore leakage is a key challenge in the petroleum industry, limiting drilling progress and increasing drilling costs. Plugging agents play a role in repairing leaks and fractures; however, traditional plugging materials generally have low mechanical strength, poor adaptability to permeable
[...] Read more.
The problem of wellbore leakage is a key challenge in the petroleum industry, limiting drilling progress and increasing drilling costs. Plugging agents play a role in repairing leaks and fractures; however, traditional plugging materials generally have low mechanical strength, poor adaptability to permeable strata, limited water absorption and expansion capabilities, and poor temperature and salt resistance. To address these limitations, a pioneering polyacrylic acid-polyacrylamide (PAA/PAM) double-network hydrogel was synthesized through aqueous solution polymerization in this study. Its strength, water absorption, expansion, temperature resistance, salt resistance, and plugging effectiveness were comprehensively evaluated. The results demonstrate that good mechanical performance is exhibited by the synthesized hydrogel, capable of withstanding a maximum stress of approximately 3.5 MPa at a 90% strain. Excellent water absorption and expansion are observed in the synthesized double-network hydrogel, with a maximum expansion of 6 times within 30 min and 8 times after 2 h. Test results show that the hydrogel had good temperature resistance and salt resistance, maintaining a strength grade E within the experimental range. The simulated evaluation of the plugging experiment indicates that, under conditions of 130 °C and 6 MPa, the leakage rate of the drilling fluid is maintained below 5 mL/min when the double-network hydrogel is utilized. From the above experimental results, it can be illustrated that excellent mechanical properties, impressive water absorption, and expansion capabilities are exhibited by the synthesized double-network hydrogel. Furthermore, the high-temperature resistance and salt resistance of the double-network hydrogel were also demonstrated. Therefore, In comparison to traditional plugging materials, significant promise is held by this newly synthesized double-network hydrogel material as a plugging agent in drilling fluids.
Full article
(This article belongs to the Special Issue Gels for Oil Drilling and Enhanced Recovery (2nd Edition))
►▼
Show Figures
Figure 1
Open AccessArticle
Optimization of Ink Composition and 3D Printing Process to Develop Soy Protein-Based Scaffolds
by
Teresa Carranza, Aitor Tejo-Otero, Carlos Bengoechea, Pedro Guerrero and Koro de la Caba
Gels 2024, 10(4), 223; https://doi.org/10.3390/gels10040223 - 25 Mar 2024
Abstract
Inks based on soybean protein isolate (SPI) were developed and their formulations were optimized as a function of the ink heat treatment and the content of other biopolymers to assess the effects of protein–polysaccharides and protein–protein interactions. First, the rheological behavior of the
[...] Read more.
Inks based on soybean protein isolate (SPI) were developed and their formulations were optimized as a function of the ink heat treatment and the content of other biopolymers to assess the effects of protein–polysaccharides and protein–protein interactions. First, the rheological behavior of the inks was analyzed in relation to the polyvinyl alcohol (PVA) concentration employed (20, 25, and 30 wt%) and, as a result of the analysis, the ink with 25 wt% PVA was selected. Additionally, sodium alginate (SA) and gelatin (GEL) were added to the formulations to improve the viscoelastic properties of the inks and the effect of the SA or GEL concentrations (1, 2, and 3 wt%) was studied. All inks showed shear thinning behavior and self-supporting abilities. Among all the 3D printed scaffolds, those with higher SA (3 wt%) or GEL (2 and 3 wt%) content showed higher shape fidelity and were selected for further characterization. Texture profile analysis demonstrated that the scaffolds prepared with previously heat-treated inks containing 3 wt% GEL showed the highest strength. Additionally, these scaffolds showed a higher water-uptake capacity profile.
Full article
(This article belongs to the Special Issue Advances in Gel Films)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Gel-Embedded Biochar and Hydroxyapatite Composite for the Improvement of Saline-Alkali Soil and Plant Growth Promotion
by
Xin Hu, Weiqin Ma, Lhamo Pasang, Jiansheng Li and Haoming Chen
Gels 2024, 10(4), 222; https://doi.org/10.3390/gels10040222 - 25 Mar 2024
Abstract
Soil amendments play a crucial role in modern agriculture, as they effectively enhance the planting environment. This study innovatively proposes the use of gel as a crosslinking agent to embed biochar and hydroxyapatite (HAP), thereby preparing a novel soil amendment. Furthermore, this study
[...] Read more.
Soil amendments play a crucial role in modern agriculture, as they effectively enhance the planting environment. This study innovatively proposes the use of gel as a crosslinking agent to embed biochar and hydroxyapatite (HAP), thereby preparing a novel soil amendment. Furthermore, this study investigates the soil improvement effects of this amendment as well as its influence on plant growth. This study employed a hydrothermal method to combine corn stalk (CB) or sludge (SB) biochar with HAP at different ratios (0–20%). Subsequently, sodium alginate gel (SA) was utilized to encapsulate the biochar and minerals, successfully forming a ternary composite gel material (corn stalk biochar/sludge biochar–sodium alginate gel-hydroxyapatite: CB/SB-SA-HAP). Finally, the practical effectiveness of this amendment was verified through potted soil experiments. The results indicate that the CB/SB-SA-HAP composite materials exhibited a micrometre-scale spherical structure with well-developed micropores and possess the functional groups of CB/SB, SA, and HAP, along with unique mineral properties. Through pot experiments, it was verified that the composite material effectively enhances multiple soil properties. After 21 days of cultivation, the soil pH values stabilized within the neutral range (pH = 7 ± 0.3) across all treatment groups. Except for the CB0 (CB:HAP = 1:0) and CB2.0 (CB:HAP = 1:2) treatments, the remaining treatments significantly reduced the soil EC values by 3.27% to 47.92%. All treatments significantly increased the contents of alkali-hydrolysable nitrogen (AHN) (34.89~57.91%), available phosphorus (AP) (35.93~56.55%), and available potassium (AK) (36.41~56.80%) in the soil. In comparison, although the SB treatment was more effective in regulating the pH and electrical conductivity (EC) of saline–alkali soil than the CB treatment, it was less effective in promoting plant growth in the short term. Through correlation analysis and redundancy analysis, a significant positive correlation was found between soil pH and ryegrass germination rate and plant height, particularly with the most pronounced impact on soil pH observed in the CB1.0 and SB0 (SB:HAP = 1:0) treatments. This study underscores the potential of CB/SB-SA-HAP composite materials in soil improvement and plant growth promotion, providing valuable insights for soil remediation, enhancement, and plant cultivation advancements in the agricultural sector.
Full article
(This article belongs to the Special Issue Functionalized Gels for Environmental Applications (2nd Edition))
►▼
Show Figures
Figure 1
Open AccessArticle
Exploring Cellulose Triacetate Nanofibers as Sustainable Structuring Agent for Castor Oil: Formulation Design and Rheological Insights
by
M. A. Martín-Alfonso, José F. Rubio-Valle, Gethzemani M. Estrada-Villegas, Margarita Sánchez-Domínguez and José E. Martín-Alfonso
Gels 2024, 10(4), 221; https://doi.org/10.3390/gels10040221 - 25 Mar 2024
Abstract
Developing gelled environmentally friendly dispersions in oil media is a hot topic for many applications. This study aimed to investigate the production of electrospun cellulose triacetate (CTA) nanofibers and to explore their potential application as a thickening agent for castor oil. The key
[...] Read more.
Developing gelled environmentally friendly dispersions in oil media is a hot topic for many applications. This study aimed to investigate the production of electrospun cellulose triacetate (CTA) nanofibers and to explore their potential application as a thickening agent for castor oil. The key factors in the electrospinning process, including the intrinsic properties of CTA solutions in methylene chloride (DCM)/ethanol (EtOH), such us the shear viscosity, surface tension, and electrical conductivity, were systematically studied. The impact of the CTA fiber concentration and the ratio of DCM/EtOH on the rheological properties of the gel-like dispersions in castor oil was then investigated. It was found that dispersions with a non-Newtonian response and above a critical concentration (5 wt.%), corresponding to approximately 2–2.5 times the entanglement concentration, are required to produce defect-free nanofibers. The average fiber diameter increased with CTA concentration. Further, the morphology and texture of the electrospun nanofibers are influenced by the ratio of solvents used. The rheological properties of dispersions are strongly influenced by the concentration and surface properties of nanofibers, such as their smooth or porous textures, which allow their modulation. Compared to other commonly used thickeners, such as synthetic polymers and metal soaps, CTA electrospun nanofibers have a much higher oil structuring capacity. This work illustrated the potential of using CTA nanofibers as the foundation for fabricating gel-like dispersions in oil media, and thus exerting hierarchical control of rheological properties through the use of a nanoscale fabrication technique.
Full article
(This article belongs to the Special Issue Recent Advance in Food Gels (2nd Edition))
►▼
Show Figures
Graphical abstract
Open AccessReview
Three-Dimensional Printing Strategies for Enhanced Hydrogel Applications
by
Hossein Omidian and Kwadwo Mfoafo
Gels 2024, 10(4), 220; https://doi.org/10.3390/gels10040220 - 25 Mar 2024
Abstract
This study explores the dynamic field of 3D-printed hydrogels, emphasizing advancements and challenges in customization, fabrication, and functionalization for applications in biomedical engineering, soft robotics, and tissue engineering. It delves into the significance of tailored biomedical scaffolds for tissue regeneration, the enhancement in
[...] Read more.
This study explores the dynamic field of 3D-printed hydrogels, emphasizing advancements and challenges in customization, fabrication, and functionalization for applications in biomedical engineering, soft robotics, and tissue engineering. It delves into the significance of tailored biomedical scaffolds for tissue regeneration, the enhancement in bioinks for realistic tissue replication, and the development of bioinspired actuators. Additionally, this paper addresses fabrication issues in soft robotics, aiming to mimic biological structures through high-resolution, multimaterial printing. In tissue engineering, it highlights efforts to create environments conducive to cell migration and functional tissue development. This research also extends to drug delivery systems, focusing on controlled release and biocompatibility, and examines the integration of hydrogels with electronic components for bioelectronic applications. The interdisciplinary nature of these efforts highlights a commitment to overcoming material limitations and optimizing fabrication techniques to realize the full potential of 3D-printed hydrogels in improving health and well-being.
Full article
(This article belongs to the Special Issue 3D Printing of Gels: Applications and Properties)
►▼
Show Figures
Figure 1
Open AccessArticle
Dual-Delivery Temperature-Sensitive Hydrogel with Antimicrobial and Anti-Inflammatory Brevilin A and Nitric Oxide for Wound Healing in Bacterial Infection
by
Linghui Ruan, Chengfeng Pan, Xianting Ran, Yonglan Wen, Rui Lang, Mei Peng, Jiafu Cao and Juan Yang
Gels 2024, 10(4), 219; https://doi.org/10.3390/gels10040219 - 24 Mar 2024
Abstract
Bacterial infections impede the wound healing process and can trigger local or systemic inflammatory responses. Therefore, there is an urgent need to develop a dressing with antimicrobial and anti-inflammatory properties to promote the healing of infected wounds. In this study, BA/COs/NO-PL/AL hydrogels were
[...] Read more.
Bacterial infections impede the wound healing process and can trigger local or systemic inflammatory responses. Therefore, there is an urgent need to develop a dressing with antimicrobial and anti-inflammatory properties to promote the healing of infected wounds. In this study, BA/COs/NO-PL/AL hydrogels were obtained by adding brevilin A (BA) camellia oil (CO) submicron emulsion and nitric oxide (NO) to hydrogels consisting of sodium alginate (AL) and Pluronic F127 (PL). The hydrogels were characterized through dynamic viscosity analysis, differential scanning calorimetry, and rheology. They were evaluated through anti-inflammatory, antimicrobial, and wound healing property analyses. The results showed that BA/COs/NO-PL/AL hydrogels were thermo-responsive and had good ex vivo and in vivo anti-inflammatory activity, and they also exhibited strong antimicrobial activity against methicillin-resistant Staphylococcus aureus Pseudomonas aeruginosa (MRPA) and methicillin-resistant Staphylococcus aureus (MRSA). They were able to effectively promote healing of the infected wound model and reduce inflammation and bacterial burden. H&E and Masson’s staining showed that BA/COs/NO-PL/AL hydrogels promoted normal epithelial formation and collagen deposition. In conclusion, BA/COs/NO-PL/AL hydrogels are promising candidates for promoting the healing of infected wounds.
Full article
(This article belongs to the Special Issue Multifunctional Hydrogel for Wound Healing and Tissue Repair)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Upcycling Low-Quality Cotton Fibers into Mulch Gel Films in a Fast Closed Carbon Cycle
by
Shaida S. Rumi, Sumedha Liyanage, Zhen Zhang and Noureddine Abidi
Gels 2024, 10(4), 218; https://doi.org/10.3390/gels10040218 - 23 Mar 2024
Abstract
Low-quality cotton fibers, often overlooked as low-value materials, constitute a marginalized waste stream in the cotton industry. This study endeavored to repurpose these fibers into mulch gel films, specifically exploring their efficacy in covering moisture-controlled soil beds. Through a meticulously designed series of
[...] Read more.
Low-quality cotton fibers, often overlooked as low-value materials, constitute a marginalized waste stream in the cotton industry. This study endeavored to repurpose these fibers into mulch gel films, specifically exploring their efficacy in covering moisture-controlled soil beds. Through a meticulously designed series of processing methods, cellulose/glycerol film was successfully fabricated by regenerating cellulose hydrogels in N,N-dimethylacetamide/lithium chloride solutions, followed by plasticization in glycerol/water solutions and hot pressing. The film was then employed to cover soil beds for a duration of up to 252 days, followed by soil burial assessments. Despite expectations of degradation, the film maintained structural integrity throughout the soil covering period but underwent complete biodegradation after 80 days of soil burial, thereby completing a closed carbon cycle. Intriguingly, both tensile strength and modulus exhibited no diminishment but instead increased after soil covering, contrary to expectations given the usual role of degradation. Mechanistic insights revealed that the removal of glycerol contributed to the mechanical enhancement, while microbial activity predominately decomposed the amorphous regions in soil covering and targeted the crystalline portions in soil burial, elucidating the main biodegradation mechanisms. In summary, this study presents, for the first time, the potential of upcycling low-quality cotton fibers into high-value mulch gel films for agricultural practices within a closed carbon cycle.
Full article
(This article belongs to the Special Issue Advances in Cellulose-Based Hydrogels (3rd Edition))
►▼
Show Figures
Graphical abstract
Open AccessArticle
Nanogels Based on N,N-Dimethylacrylamide and β-Cyclodextrin Triacrylate for Enhanced Solubility and Therapeutic Efficacy of Aripiprazole
by
Siyka Stoilova, Dilyana Georgieva, Rositsa Mihaylova, Petar D. Petrov and Bistra Kostova
Gels 2024, 10(4), 217; https://doi.org/10.3390/gels10040217 - 22 Mar 2024
Abstract
Aripiprazole (ARZ) is a medication used for the treatment of various diseases such as schizophrenia, bipolar disorder, major depressive disorder, autism, and Tourette’s syndrome. Despite its therapeutic benefits, ARZ is characterized by a poor water solubility which provoked the development of various delivery
[...] Read more.
Aripiprazole (ARZ) is a medication used for the treatment of various diseases such as schizophrenia, bipolar disorder, major depressive disorder, autism, and Tourette’s syndrome. Despite its therapeutic benefits, ARZ is characterized by a poor water solubility which provoked the development of various delivery systems in order to enhance its solubility. In the present work, a nanoscale drug delivery system based on N,N-dimethylacrylamide (DMAA) and β-cyclodextrin triacrylate (β-CD-Ac3) as potential aripiprazole delivery vehicles was developed. The nanogels were synthesized by free radical polymerization of DMAA in the presence of β-CD-Ac3 as a crosslinking agent and then loaded with ARZ via host-guest inclusion complexation. The blank- and drug-loaded nanogels were evaluated using different methods. Fourier transform infrared (FTIR) spectroscopy was employed to confirm the incorporation of β-CD moieties into the polymer network. Dynamic light scattering (DLS) was used to study the size of the developed systems. The samples exhibited a monomodal particle size distribution and a relatively narrow dispersity index. The hydrodynamic diameter (Dh) of the gels varied between 107 and 129 nm, with a tendency for slightly larger particles as the β-CD-Ac3 fraction increased. Loading the drug into the nanocarrier resulted in slightly larger particles than the blank gels, but their size was still in the nanoscopic range (166 to 169 nm). The release profiles in PBS were studied and a sustained release pattern with no significant burst effect was observed. A cytotoxicity assessment was also conducted to demonstrate the non-toxicity and biocompatibility of the studied polymers.
Full article
(This article belongs to the Special Issue Gel-Based Materials: Preparations and Characterization (2nd Edition))
►▼
Show Figures
Figure 1
Open AccessReview
Evolution of Hybrid Hydrogels: Next-Generation Biomaterials for Drug Delivery and Tissue Engineering
by
Md Mohosin Rana and Hector De la Hoz Siegler
Gels 2024, 10(4), 216; https://doi.org/10.3390/gels10040216 - 22 Mar 2024
Abstract
Hydrogels, being hydrophilic polymer networks capable of absorbing and retaining aqueous fluids, hold significant promise in biomedical applications owing to their high water content, permeability, and structural similarity to the extracellular matrix. Recent chemical advancements have bolstered their versatility, facilitating the integration of
[...] Read more.
Hydrogels, being hydrophilic polymer networks capable of absorbing and retaining aqueous fluids, hold significant promise in biomedical applications owing to their high water content, permeability, and structural similarity to the extracellular matrix. Recent chemical advancements have bolstered their versatility, facilitating the integration of the molecules guiding cellular activities and enabling their controlled activation under time constraints. However, conventional synthetic hydrogels suffer from inherent weaknesses such as heterogeneity and network imperfections, which adversely affect their mechanical properties, diffusion rates, and biological activity. In response to these challenges, hybrid hydrogels have emerged, aiming to enhance their strength, drug release efficiency, and therapeutic effectiveness. These hybrid hydrogels, featuring improved formulations, are tailored for controlled drug release and tissue regeneration across both soft and hard tissues. The scientific community has increasingly recognized the versatile characteristics of hybrid hydrogels, particularly in the biomedical sector. This comprehensive review delves into recent advancements in hybrid hydrogel systems, covering the diverse types, modification strategies, and the integration of nano/microstructures. The discussion includes innovative fabrication techniques such as click reactions, 3D printing, and photopatterning alongside the elucidation of the release mechanisms of bioactive molecules. By addressing challenges, the review underscores diverse biomedical applications and envisages a promising future for hybrid hydrogels across various domains in the biomedical field.
Full article
(This article belongs to the Special Issue Hydrogel for Tissue Regeneration)
►▼
Show Figures
Figure 1
Open AccessArticle
Use of Self-Generating Foam Gel Composition with Subsequent Injection of Hydrogel to Limit Gas Inflow in Horizontal Wells of Vostochno-Messoyakhskoye Field
by
Aleksey Telin, Dmitriy Karazeev, Sergey Vezhnin, Vladimir Strizhnev, Aleksey Levadsky, Anton Mamykin, Lyubov Lenchenkova, Ravil Yakubov, Alsu Fakhreeva, Alfir Akhmetov, Aleksey Oleynik, Anton Shirobokov, Bulat Minnebaev, Ilyas Mullagalin and Ramil Bakhtizin
Gels 2024, 10(4), 215; https://doi.org/10.3390/gels10040215 - 22 Mar 2024
Abstract
Gas inflow control in oil wells is one of the most challenging types of repair and sealing operations, the success rate of which does not exceed, as a rule, 30%. Conventional shutoff methods are often ineffective for this purpose. For instance, cement solutions
[...] Read more.
Gas inflow control in oil wells is one of the most challenging types of repair and sealing operations, the success rate of which does not exceed, as a rule, 30%. Conventional shutoff methods are often ineffective for this purpose. For instance, cement solutions cannot be injected into wells in the required volumes, while gel screens can only temporarily block the breakthrough zones, as gas easily seeps through the gel, forming new channels for gas inflow. Technology for the two-stage injection of gas-insulating gel systems for gas control in horizontal wells was developed. At the first stage, a self-generating foam gel composition (FGC), consisting of gel-forming and gas-forming compositions, was used. A foam gel structure with enhanced rheological and flow characteristics was formed over a controlled time as a result of the interaction between the gel-forming and gas-forming compounds. A PAM-based hydrogel crosslinked with an organic crosslinker was added to the FGC at the second stage of treatment. The laboratory experiments substantiated the technology of well gas and water shutoff by the sequential injection of self-generating foam gel composition and hydrogel. Field tests confirmed the correctness of the chosen concept. It is very important to clearly identify the sources of gas inflow for the success of this well intervention and take into account the well design, as well as the reservoir geological structure and characteristics. The gas shutoff operation can be properly designed for each well only by comparing all these factors. The validity of the selected technology was tested through a series of laboratory experiments. Successful laboratory tests allowed for the application of the studied technology in a field setting, where the gas shutoff agent was injected into three horizontal wells. As a result of the field application, the gas inflow was successfully isolated in two wells. However, the application of the technology failed in the third well which gave an opportunity to revisit the technology’s design and to review the sources of gas inflow. Overall, the achieved success rate of 66% demonstrated the high efficiency of the studied technology and supported its wider application in the field.
Full article
(This article belongs to the Special Issue Gels for Oil Drilling and Enhanced Recovery (2nd Edition))
►▼
Show Figures
Figure 1
Open AccessArticle
A Comparative Study between Beeswax and Glycerol Monostearate for Food-Grade Oleogels
by
Francesca Malvano, Donatella Albanese, Luciano Cinquanta, Sara Liparoti and Francesco Marra
Gels 2024, 10(4), 214; https://doi.org/10.3390/gels10040214 - 22 Mar 2024
Abstract
With the aim to produce solid fats with a high percentage of unsaturated fatty acids, oleogels based on olive and peanut oil with different concentrations of beeswax (BW) and glycerol monostearate (GMS) as oleogelators were studied and compared. The critical oleogelator concentration for
[...] Read more.
With the aim to produce solid fats with a high percentage of unsaturated fatty acids, oleogels based on olive and peanut oil with different concentrations of beeswax (BW) and glycerol monostearate (GMS) as oleogelators were studied and compared. The critical oleogelator concentration for both BW and GMS was 3%. Thermal properties of the developed GMS-based oleogels pointed to a polymorphic structure, confirmed by the presence of two exothermic and endothermic peaks. All developed oleogels released less than 4% of oil, highlighting their high oil binding capacity. A morphology evaluation of oleogels showed platelet-like crystals, characterized by a cross-sectional length of 50 μm in BW-based oleogels and irregular clusters of needle-like crystals with a higher diameter in GMS-based oleogels. BW-based oleogels showed a solid fat content ranging from 1.16% to 2.27%, and no solid fat content was found at 37 °C. GMS-based oleogels reached slightly higher values of SFC that ranged from 1.58% to 2.97% at 25 °C and from 1.00% to 1.75% at 37 °C. Olive oil-based oleogels with GMS showed higher firmness compared with BW-based ones. The stronger structure network in olive oil/GMS-based oleogels provided a real physical barrier to oxidants, showing a high oxidation stability.
Full article
(This article belongs to the Special Issue Recent Advances in Food Gels)
►▼
Show Figures
Figure 1
Journal Menu
► ▼ Journal Menu-
- Gels Home
- Aims & Scope
- Editorial Board
- Reviewer Board
- Topical Advisory Panel
- Instructions for Authors
- Special Issues
- Topics
- Sections & Collections
- Article Processing Charge
- Indexing & Archiving
- Editor’s Choice Articles
- Most Cited & Viewed
- Journal Statistics
- Journal History
- Journal Awards
- Conferences
- Editorial Office
Journal Browser
► ▼ Journal BrowserHighly Accessed Articles
Latest Books
E-Mail Alert
News
Topics
Topic in
Applied Sciences, Energies, Gases, Gels, Nanomaterials, Processes
Multi-Phase Flow and Unconventional Oil/Gas Development
Topic Editors: Binfei Li, Wei Liu, Shibao YuanDeadline: 31 March 2024
Conferences
Special Issues
Special Issue in
Gels
Food Gels: Properties and Applications
Guest Editors: Honghai Hu, Jianhui Xiao, Lianliang LiuDeadline: 30 March 2024
Special Issue in
Gels
Hydrogel-Based Novel Biomaterials: Achievements and Prospects
Guest Editors: Ana Paula Serro, Ana Isabel Fernandes, Diana SilvaDeadline: 31 March 2024
Special Issue in
Gels
Advances in Hydrogels for Biomedical Applications
Guest Editor: Nicola ZerbinatiDeadline: 15 April 2024
Special Issue in
Gels
Structured Gels: Mechanics, Responsivity and Applications
Guest Editors: Mutian Hua, Shuwang WuDeadline: 30 April 2024
Topical Collections
Topical Collection in
Gels
Recent Advances and Future Perspectives in Stimuli-Responsive Gels
Collection Editors: Dirk Kuckling, Sandra Van Vlierberghe
Topical Collection in
Gels
Recent Advances and Future Perspectives in Organogels and Organogelators Research
Collection Editor: Jean-Michel Guenet
Topical Collection in
Gels
Hydrogel in Tissue Engineering and Regenerative Medicine
Collection Editor: Esmaiel Jabbari