Journal Description
Nanomaterials
Nanomaterials
is an international, peer-reviewed, interdisciplinary scholarly open access journal, published semimonthly online by MDPI. It publishes reviews, regular research papers, communications, and short notes that are relevant to any field of study that involves nanomaterials, with respect to their science and application. The Spanish Carbon Group (GEC) is affiliated with Nanomaterials and their members receive discounts on the article processing charges.
- Open Access— free for readers, with article processing charges (APC) paid by authors or their institutions.
- High Visibility: indexed within Scopus, SCIE (Web of Science), PubMed, PMC, CAPlus / SciFinder, Inspec, and other databases.
- Journal Rank: JCR - Q1 (Physics, Applied) / CiteScore - Q1 (General Chemical Engineering)
- Rapid Publication: manuscripts are peer-reviewed and a first decision is provided to authors approximately 13.6 days after submission; acceptance to publication is undertaken in 2.5 days (median values for papers published in this journal in the second half of 2023).
- Recognition of Reviewers: reviewers who provide timely, thorough peer-review reports receive vouchers entitling them to a discount on the APC of their next publication in any MDPI journal, in appreciation of the work done.
- Companion journals for Nanomaterials include: Nanomanufacturing and Applied Nano.
Impact Factor:
5.3 (2022);
5-Year Impact Factor:
5.4 (2022)
Latest Articles
A Room Temperature Trimethylamine Gas Sensor Based on Electrospinned Molybdenum Oxide Nanofibers/Ti3C2Tx MXene Heterojunction
Nanomaterials 2024, 14(6), 537; https://doi.org/10.3390/nano14060537 (registering DOI) - 18 Mar 2024
Abstract
The combination of two-dimensional material MXene and one-dimensional metal oxide semiconductor can improve the carrier transmission rate, which can effectively improve sensing performance. We prepared a trimethylamine gas sensor based on MoO3 nanofibers and layered Ti3C2Tx MXene.
[...] Read more.
The combination of two-dimensional material MXene and one-dimensional metal oxide semiconductor can improve the carrier transmission rate, which can effectively improve sensing performance. We prepared a trimethylamine gas sensor based on MoO3 nanofibers and layered Ti3C2Tx MXene. Using electrospinning and chemical etching methods, one-dimensional MoO3 nanofibers and two-dimensional Ti3C2Tx MXene nanosheets were prepared, respectively, and the composites were characterized via XPS, SEM, and TEM. The Ti3C2Tx MXene–MoO3 composite material exhibits excellent room-temperature response characteristics to trimethylamine gas, showing high response (up to four for 2 ppm trimethylamine gas) and rapid response–recovery time (10 s/7 s). Further, we have studied the possible sensitivity mechanism of the sensor. The Ti3C2Tx MXene–MoO3 composite material has a larger specific surface area and more abundant active sites, combined with p–n heterojunction, which effectively improves the sensitivity of the sensor. Because of its low detection limit and high stability, it has the potential to be applied in the detection system of trimethylamine as a biomarker in exhaled air.
Full article
(This article belongs to the Special Issue Advanced Nanomaterials in Gas and Humidity Sensors)
Open AccessArticle
Rational Design of a Portable Chemometric-Assisted Voltammetric Sensor Based on Ion-Imprinted Polymeric Film for Co(II) Determination in Water
by
Sabrina Di Masi, Nelson Arturo Manrique Rodriguez, Marco Costa, Giuseppe Egidio De Benedetto and Cosimino Malitesta
Nanomaterials 2024, 14(6), 536; https://doi.org/10.3390/nano14060536 - 18 Mar 2024
Abstract
Herein, chemometric-assisted synthesis of electrochemical sensors based on electropolymerised ion-imprinted polymeric (e-IIP) films was explored. Co(II)-IIPs sensors were prepared by performing electropolymerisation procedures of polymerisation mixtures comprising varying concentrations of an electroactive o-aminophenol (o-AP) monomer and Co(II) ions, respectively, according to the Taguchi
[...] Read more.
Herein, chemometric-assisted synthesis of electrochemical sensors based on electropolymerised ion-imprinted polymeric (e-IIP) films was explored. Co(II)-IIPs sensors were prepared by performing electropolymerisation procedures of polymerisation mixtures comprising varying concentrations of an electroactive o-aminophenol (o-AP) monomer and Co(II) ions, respectively, according to the Taguchi L9 experimental design, exploiting the simultaneous evaluation of other controlled parameters during electrosynthesis. Each e-IIP developed from Taguchi runs was compared with the respective non-imprinted polymer (NIP) films and fitted according to Langmuir–Freudlich isotherms. Distinctive patterns of low and high-affinity films were screened based on the qualities and properties of the developed IIPs in terms of binding kinetics (KD), imprinting factor, and the heterogeneity index of produced cavities. These results can provide a generic protocol for chemometric-assisted synthesis of e-IIPs based on poly-o-AP, providing highly stable, reproducible, and high-affinity imprinted polymeric films for monitoring purposes.
Full article
(This article belongs to the Section Environmental Nanoscience and Nanotechnology)
►▼
Show Figures
Figure 1
Open AccessArticle
Effect of Deposition Working Power on Physical Properties of RF-Sputtered CdTe Thin Films for Photovoltaic Applications
by
Ana-Maria Răduță, Ana-Maria Panaitescu, Marina Manica, Sorina Iftimie, Vlad-Andrei Antohe, Ovidiu Toma, Adrian Radu, Lucian Ion, Mirela Petruta Suchea and Ștefan Antohe
Nanomaterials 2024, 14(6), 535; https://doi.org/10.3390/nano14060535 - 18 Mar 2024
Abstract
The main objective of this study was to determine the variation in the properties of cadmium telluride (CdTe) thin films deposited on a p-type Si substrate by the radio frequency magnetron sputtering technique at four different working powers (70 W, 80 W, 90
[...] Read more.
The main objective of this study was to determine the variation in the properties of cadmium telluride (CdTe) thin films deposited on a p-type Si substrate by the radio frequency magnetron sputtering technique at four different working powers (70 W, 80 W, 90 W, and 100 W). The substrate temperature, working pressure, and deposition time during the deposition process were kept constant at 220 °C, 0.46 Pa, and 30 min, respectively. To study the structural, morphological, and optical properties of the CdTe films grown under the mentioned experimental conditions, X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), and optical spectroscopy were used. For a better analysis of the films’ structural and optical properties, a group of films were deposited onto optical glass substrates under similar deposition conditions. The electrical characterisation of Ag/CdTe/Al “sandwich” structures was also performed using current–voltage characteristics in the dark at different temperatures. The electrical measurements allowed the identification of charge transport mechanisms through the structure. New relevant information released by the present study points towards 90 W RF power as the optimum for obtaining a high crystallinity of ~1 μm nanostructured thin films deposited onto p-Si and optical glass substrates with optical and electrical properties that are suitable for use as absorber layers. The obtained high-quality CdTe nanostructured thin films are perfectly suitable for use as absorbers in CdTe thin-film photovoltaic cells.
Full article
(This article belongs to the Special Issue Novel Nanocomposites: Optical, Electrical, Mechanical and Surface-Related Properties (Volume II))
►▼
Show Figures
Figure 1
Open AccessArticle
High Barrier Properties of Butyl Rubber Composites Containing Liquid Rubber and Graphene Oxide
by
Jiaye Li, Zhanghao Yang, Shanjun Hu, Xianhong Huang, Stephen Jerrams, Shui Hu, Li Liu and Shipeng Wen
Nanomaterials 2024, 14(6), 534; https://doi.org/10.3390/nano14060534 - 18 Mar 2024
Abstract
►▼
Show Figures
The high elasticity and excellent gas barrier properties of rubber composites make them irreplaceable in the field of sealing. Constructing a complicated barrier network to reduce free volume is crucial to improving gas barrier properties. In this research, liquid acrylonitrile-butadiene rubber/γ-Methacryloxypropyl trimethoxy silane
[...] Read more.
The high elasticity and excellent gas barrier properties of rubber composites make them irreplaceable in the field of sealing. Constructing a complicated barrier network to reduce free volume is crucial to improving gas barrier properties. In this research, liquid acrylonitrile-butadiene rubber/γ-Methacryloxypropyl trimethoxy silane (KH570) modified graphene oxide/butyl rubber composites (LNBR/KGO/IIR) were fabricated. A KGO lamellar network was constructed to resist gas diffusion in the IIR matrix. Meanwhile, LNBR macromolecules further occupied the free volume inside the IIR composites, thereby maximizing the retardation of the path of small molecule gas permeation. The modification of GO by KH570 was successfully demonstrated through FTIR and XRD. The grafting rate of KH570 was calculated to be approximately 71.4%. KGO was well dispersed in IIR due to emulsion compounding and the formation of lamellar networks. The 300% modulus, tensile strength and tear strength of KGO/IIR were improved by 43.5%, 39.1% and 14.8%, respectively, compared to those of the IIR composite. In addition, the introduction of LNBR resulted in a 44.2% improvement in the gas barrier performance of nitrogen permeability relative to the original IIR composite.
Full article
Figure 1
Open AccessArticle
Optical Limiting Response of Porous Carbon Dispersions
by
Bo Gao, Xuhui Zhao, Lihe Yan, Lijiao Yang, Yue Zhang, Tao Lin and Jinhai Si
Nanomaterials 2024, 14(6), 533; https://doi.org/10.3390/nano14060533 - 17 Mar 2024
Abstract
With the wide application of intense lasers, the protection of human eyes and detectors from laser damage is becoming more and more strict. In this paper, we study the nonlinear optical limiting (OL) properties of porous carbon with a super large specific surface
[...] Read more.
With the wide application of intense lasers, the protection of human eyes and detectors from laser damage is becoming more and more strict. In this paper, we study the nonlinear optical limiting (OL) properties of porous carbon with a super large specific surface area (2.9 × 103 m2/g) using the nanosecond Z-scan technique. Compared to the traditional OL material C60, the porous carbon material shows an excellent broadband limiting effect, and the limiting thresholds correspond to 0.11 J/cm2 for 532 nm and 0.25 J/cm2 for 1064 nm pulses, respectively. The nonlinear scattering experiments showed that the OL behavior was mainly attributed to the nonlinear scattering effect, which is caused by the rapid growth and expansion of bubbles in the dispersion induced by laser irradiation, and the scattered light distribution is consistent with the results of Mie’s scattering. These results suggest that porous carbon materials are expected to be applied to the field of laser protection in the future to further protect the human eye and precision optical instruments.
Full article
(This article belongs to the Special Issue Nonlinear Optical Materials in Fundamental Science and Practical Applications)
►▼
Show Figures
Figure 1
Open AccessArticle
Effect of Electrochemically Active Top Electrode Materials on Nanoionic Conductive Bridge Y2O3 Random-Access Memory
by
Yoonjin Cho, Sangwoo Lee, Seongwon Heo, Jin-Hyuk Bae, In-Man Kang, Kwangeun Kim, Won-Yong Lee and Jaewon Jang
Nanomaterials 2024, 14(6), 532; https://doi.org/10.3390/nano14060532 - 16 Mar 2024
Abstract
Herein, sol–gel-processed Y2O3 resistive random-access memory (RRAM) devices were fabricated. The top electrodes (TEs), such as Ag or Cu, affect the electrical characteristics of the Y2O3 RRAM devices. The oxidation process, mobile ion migration speed, and reduction
[...] Read more.
Herein, sol–gel-processed Y2O3 resistive random-access memory (RRAM) devices were fabricated. The top electrodes (TEs), such as Ag or Cu, affect the electrical characteristics of the Y2O3 RRAM devices. The oxidation process, mobile ion migration speed, and reduction process all impact the conductive filament formation of the indium–tin–oxide (ITO)/Y2O3/Ag and ITO/Y2O3/Cu RRAM devices. Between Ag and Cu, Cu can easily be oxidized due to its standard redox potential values. However, the conductive filament is easily formed using Ag TEs. After triggering the oxidation process, the formed Ag mobile metal ions can migrate faster inside Y2O3 active channel materials when compared to the formed Cu mobile metal ions. The fast migration inside the Y2O3 active channel materials successfully reduces the SET voltage and improves the number of programming–erasing cycles, i.e., endurance, which is one of the nonvolatile memory parameters. These results elucidate the importance of the electrochemical properties of TEs, providing a deeper understanding of how these factors influence the resistive switching characteristics of metal oxide-based atomic switches and conductive-metal-bridge-filament-based cells.
Full article
(This article belongs to the Special Issue Nano-Structured Thin Films: Growth, Characteristics, and Application)
►▼
Show Figures
Figure 1
Open AccessReview
Biomimetic Scaffolds—A Novel Approach to Three Dimensional Cell Culture Techniques for Potential Implementation in Tissue Engineering
by
Tomasz Górnicki, Jakub Lambrinow, Afsaneh Golkar-Narenji, Krzysztof Data, Dominika Domagała, Julia Niebora, Maryam Farzaneh, Paul Mozdziak, Maciej Zabel, Paweł Antosik, Dorota Bukowska, Kornel Ratajczak, Marzenna Podhorska-Okołów, Piotr Dzięgiel and Bartosz Kempisty
Nanomaterials 2024, 14(6), 531; https://doi.org/10.3390/nano14060531 - 16 Mar 2024
Abstract
Biomimetic scaffolds imitate native tissue and can take a multidimensional form. They are biocompatible and can influence cellular metabolism, making them attractive bioengineering platforms. The use of biomimetic scaffolds adds complexity to traditional cell cultivation methods. The most commonly used technique involves cultivating
[...] Read more.
Biomimetic scaffolds imitate native tissue and can take a multidimensional form. They are biocompatible and can influence cellular metabolism, making them attractive bioengineering platforms. The use of biomimetic scaffolds adds complexity to traditional cell cultivation methods. The most commonly used technique involves cultivating cells on a flat surface in a two-dimensional format due to its simplicity. A three-dimensional (3D) format can provide a microenvironment for surrounding cells. There are two main techniques for obtaining 3D structures based on the presence of scaffolding. Scaffold-free techniques consist of spheroid technologies. Meanwhile, scaffold techniques contain organoids and all constructs that use various types of scaffolds, ranging from decellularized extracellular matrix (dECM) through hydrogels that are one of the most extensively studied forms of potential scaffolds for 3D culture up to 4D bioprinted biomaterials. 3D bioprinting is one of the most important techniques used to create biomimetic scaffolds. The versatility of this technique allows the use of many different types of inks, mainly hydrogels, as well as cells and inorganic substances. Increasing amounts of data provide evidence of vast potential of biomimetic scaffolds usage in tissue engineering and personalized medicine, with the main area of potential application being the regeneration of skin and musculoskeletal systems. Recent papers also indicate increasing amounts of in vivo tests of products based on biomimetic scaffolds, which further strengthen the importance of this branch of tissue engineering and emphasize the need for extensive research to provide safe for humansbiomimetic tissues and organs. In this review article, we provide a review of the recent advancements in the field of biomimetic scaffolds preceded by an overview of cell culture technologies that led to the development of biomimetic scaffold techniques as the most complex type of cell culture.
Full article
(This article belongs to the Special Issue Moving toward Biomimetic Tissue Engineered Scaffolds)
►▼
Show Figures
Figure 1
Open AccessArticle
Germanium-Based Optical Coatings for Aesthetic Enhancement with Low Radiofrequency Attenuation
by
Enrique Carretero, Rocío Chueca and Rafael Alonso
Nanomaterials 2024, 14(6), 530; https://doi.org/10.3390/nano14060530 - 15 Mar 2024
Abstract
This work focused on developing optical coatings for decorative applications that remain transparent in the radiofrequency range. To achieve this, a combination of dielectric material (silicon-aluminum nitride, SiAlNx) and low-electrical-conductivity semiconductor material (germanium) was utilized. Germanium plays a crucial role in
[...] Read more.
This work focused on developing optical coatings for decorative applications that remain transparent in the radiofrequency range. To achieve this, a combination of dielectric material (silicon-aluminum nitride, SiAlNx) and low-electrical-conductivity semiconductor material (germanium) was utilized. Germanium plays a crucial role in providing absorption in the visible spectrum, facilitating the design of coatings with various aesthetic appearances, while allowing for control over their transmittance. The optical properties of thin germanium layers were thoroughly characterized and leveraged to create multilayer designs with diverse aesthetic features. Different multilayer structures were designed, fabricated, and optically characterized, resulting in coatings with metallic gray, black, or various colors in reflection, while retaining the ability to transmit visible light for illumination and signaling applications. Finally, the radiofrequency attenuation of the developed coatings was measured, revealing negligible attenuation; this is in stark contrast to the metallic coatings used for decorative purposes, which can attenuate by up to 30 dB.
Full article
(This article belongs to the Special Issue Optical Properties of Nanostructured Thin Films)
►▼
Show Figures
Figure 1
Open AccessArticle
Influence of Concentration, Surface Charge, and Natural Water Components on the Transport and Adsorption of Polystyrene Nanoplastics in Sand Columns
by
Gabriela Hul, Hande Okutan, Philippe Le Coustumer, Stéphan Ramseier Gentile, Stéphane Zimmermann, Pascal Ramaciotti, Pauline Perdaems and Serge Stoll
Nanomaterials 2024, 14(6), 529; https://doi.org/10.3390/nano14060529 (registering DOI) - 15 Mar 2024
Abstract
Information about the influence of surface charges on nanoplastics (NPLs) transport in porous media, the influence of NPL concentrations on porous media retention capacities, and changes in porous media adsorption capacities in the presence of natural water components are still scarce. In this
[...] Read more.
Information about the influence of surface charges on nanoplastics (NPLs) transport in porous media, the influence of NPL concentrations on porous media retention capacities, and changes in porous media adsorption capacities in the presence of natural water components are still scarce. In this study, laboratory column experiments are conducted to investigate the transport behavior of positively charged amidine polystyrene (PS) latex NPLs and negatively charged sulfate PS latex NPLs in quartz sand columns saturated with ultrapure water and Geneva Lake water, respectively. Results obtained for ultrapure water show that amidine PS latex NPLs have more affinity for negatively charged sand surfaces than sulfate PS latex NPLs because of the presence of attractive electrical forces. As for the Geneva Lake water, under natural conditions, both NPL types and sand are negatively charged. Therefore, the presence of repulsion forces reduces NPL’s affinity for sand surfaces. The calculated adsorption capacities of sand grains for the removal of both types of NPLs from both types of water are oscillating around 0.008 and 0.004 mg g−1 for NPL concentrations of 100 and 500 mg L−1, respectively. SEM micrography shows individual NPLs or aggregates attached to the sand and confirms the limited role of the adsorption process in NPL retention. The important NPL retention, especially in the case of negatively charged NPLs, in Geneva Lake water-saturated columns is related to heteroaggregate formation and their further straining inside narrow pores. The presence of DOM and metal cations is then crucial to trigger the aggregation process and NPL retention.
Full article
(This article belongs to the Special Issue Environmental Fate, Transport and Effects of Nanoplastics)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Enhancing the Thermal Conductivity of CNT/AlN/Silicone Rubber Composites by Using CNTs Directly Grown on AlN to Achieve a Reduced Filler Filling Ratio
by
Naoyuki Matsumoto, Don N. Futaba, Takeo Yamada and Ken Kokubo
Nanomaterials 2024, 14(6), 528; https://doi.org/10.3390/nano14060528 - 15 Mar 2024
Abstract
Achieving the thermal conductivity required for efficient heat management in semiconductors and other devices requires the integration of thermally conductive ceramic fillers at concentrations of 60 vol% or higher. However, an increased filler content often negatively affects the mechanical properties of the composite
[...] Read more.
Achieving the thermal conductivity required for efficient heat management in semiconductors and other devices requires the integration of thermally conductive ceramic fillers at concentrations of 60 vol% or higher. However, an increased filler content often negatively affects the mechanical properties of the composite matrix, limiting its practical applicability. To address this issue, in this paper, we present a new strategy to reduce the required ceramic filler content: the use of a thermally conductive ceramic composite filler with carbon nanotubes (CNTs) grown on aluminum nitride (AlN). We combined catalyst coating technology with vacuum filtration to ensure that the catalyst was uniformly applied to micrometer-sized AlN particles, followed by the efficient and uniform synthesis of CNTs using a water-assisted process in a vertical furnace. By carefully controlling the number of vacuum filtration cycles and the growth time of the CNTs, we achieved precise control over the number and length of the CNT layers, thereby adjusting the properties of the composite to the intended specifications. When AlN/CNT hybrid fillers are incorporated into silicone rubber, while maintaining the mechanical properties of rubber, the thermal diffusivity achieved at reduced filler levels exceeds that of composites using AlN-only or simultaneous AlN and CNTs formulations. This demonstrates the critical influence of CNTs on AlN surfaces. Our study represents a significant advancement in the design of thermally conductive materials, with potential implications for a wide range of applications.
Full article
(This article belongs to the Special Issue Advances in Carbon Nanotubes: Synthesis, Properties, and Cutting-Edge Applications)
►▼
Show Figures
Figure 1
Open AccessReview
Resistive Switching Devices for Neuromorphic Computing: From Foundations to Chip Level Innovations
by
Kannan Udaya Mohanan
Nanomaterials 2024, 14(6), 527; https://doi.org/10.3390/nano14060527 - 15 Mar 2024
Abstract
Neuromorphic computing has emerged as an alternative computing paradigm to address the increasing computing needs for data-intensive applications. In this context, resistive random access memory (RRAM) devices have garnered immense interest among the neuromorphic research community due to their capability to emulate intricate
[...] Read more.
Neuromorphic computing has emerged as an alternative computing paradigm to address the increasing computing needs for data-intensive applications. In this context, resistive random access memory (RRAM) devices have garnered immense interest among the neuromorphic research community due to their capability to emulate intricate neuronal behaviors. RRAM devices excel in terms of their compact size, fast switching capabilities, high ON/OFF ratio, and low energy consumption, among other advantages. This review focuses on the multifaceted aspects of RRAM devices and their application to brain-inspired computing. The review begins with a brief overview of the essential biological concepts that inspire the development of bio-mimetic computing architectures. It then discusses the various types of resistive switching behaviors observed in RRAM devices and the detailed physical mechanisms underlying their operation. Next, a comprehensive discussion on the diverse material choices adapted in recent literature has been carried out, with special emphasis on the benchmark results from recent research literature. Further, the review provides a holistic analysis of the emerging trends in neuromorphic applications, highlighting the state-of-the-art results utilizing RRAM devices. Commercial chip-level applications are given special emphasis in identifying some of the salient research results. Finally, the current challenges and future outlook of RRAM-based devices for neuromorphic research have been summarized. Thus, this review provides valuable understanding along with critical insights and up-to-date information on the latest findings from the field of resistive switching devices towards brain-inspired computing.
Full article
(This article belongs to the Special Issue Neuromorphic Devices: Materials, Structures and Bionic Applications)
►▼
Show Figures
Figure 1
Open AccessArticle
Synthesized PANI/CeO2 Nanocomposite Films for Enhanced Anti-Corrosion Performance
by
Ahmad M. Alsaad, Mohannad Al-Hmoud, Taha M. Rababah, Mohammad W. Marashdeh, Mamduh J. Aljaafreh, Sharif Abu Alrub, Ayed Binzowaimil and Ahmad Telfah
Nanomaterials 2024, 14(6), 526; https://doi.org/10.3390/nano14060526 - 15 Mar 2024
Abstract
This study introduces a novel nanocomposite coating composed of PANI/CeO2 nanocomposite films, aimed at addressing corrosion protection needs. Analysis through FTIR spectra and XRD patterns confirms the successful formation of the nanocomposite films. Notably, the PANI/CeO2 nanocomposite films exhibit a hydrophilic
[...] Read more.
This study introduces a novel nanocomposite coating composed of PANI/CeO2 nanocomposite films, aimed at addressing corrosion protection needs. Analysis through FTIR spectra and XRD patterns confirms the successful formation of the nanocomposite films. Notably, the PANI/CeO2 nanocomposite films exhibit a hydrophilic nature. The bandgap energy of the PANI composite film is measured to be 3.74 eV, while the introduction of CeO2 NPs into the PANI matrix reduces the bandgap energy to 3.67 eV. Furthermore, the electrical conductivity of the PANI composite film is observed to be 0.40 S·cm−1, with the incorporation of CeO2 NPs leading to an increase in electrical conductivity to 1.07 S·cm−1. To evaluate its efficacy, electrochemical measurements were conducted to assess the corrosion protection performance. Results indicate a high protection efficiency of 92.25% for the PANI/CeO2 nanocomposite film.
Full article
(This article belongs to the Topic Advances in Functional Thin Films)
►▼
Show Figures
Figure 1
Open AccessArticle
A 3D-Printed Portable UV and Visible Photoreactor for Water Purification and Disinfection Experiments
by
Nelson Castro, Joana M. Queirós, Dinis C. Alves, Margarida M. Macedo Fernandes, Senetxu Lanceros-Méndez and Pedro M. Martins
Nanomaterials 2024, 14(6), 525; https://doi.org/10.3390/nano14060525 - 15 Mar 2024
Abstract
Water scarcity and contamination are urgent issues to be addressed. In this context, different materials, techniques, and devices are being developed to mitigate contemporary and forthcoming water constraints. Photocatalysis-based approaches are suitable strategies to address water contamination by degrading contaminants and eliminating microbes.
[...] Read more.
Water scarcity and contamination are urgent issues to be addressed. In this context, different materials, techniques, and devices are being developed to mitigate contemporary and forthcoming water constraints. Photocatalysis-based approaches are suitable strategies to address water contamination by degrading contaminants and eliminating microbes. Photoreactors are usually designed to perform photocatalysis in a scalable and standardised way. Few or none have been developed to combine these characteristics with portability, flexibility, and cost effectiveness. This study reports on designing and producing a portable (490 g), low-cost, and multifunctional photoreactor that includes adjustable radiation intensity and two types of wavelengths (UV-A and visible), including combined agitation in a compact mechanism produced through 3D printing technology. The mechanical, electrical, and optical subsystems were designed and assembled into a robust device. It is shown that it is possible to apply radiations that can reach 65 mW/cm2 and 110 mW/cm2 using the installed visible and UV LEDs and apply mechanical agitation up to 200 rpm, all under a ventilated system. Regarding functionality, the photoreactor proof of concept indicated the ability to degrade ~80% and 30% ciprofloxacin under UV and visible irradiation of TiO2 and Ag/TiO2 nanoparticles. The device also showed the ability to eliminate E. coli bacteria, recurring to radiation set-ups and nanoparticles. Therefore, the originally designed and constructed photoreactor concept was characterised and functionally validated as an exciting and flexible device for lab-scaled or outdoor experiments, assuring standardised and comparable results.
Full article
(This article belongs to the Special Issue Advanced Nanomaterials for Water Remediation (2nd Edition))
►▼
Show Figures
Figure 1
Open AccessArticle
Effect of n-C-S-H on Hydration and Reinforcement of Mineral Powder-Cement System at Low Temperatures
by
Wei Li, Chunxiang Qian, Qingchao Li, Kehan Wang, Chunyang Zheng and Yanli Zhang
Nanomaterials 2024, 14(6), 524; https://doi.org/10.3390/nano14060524 - 15 Mar 2024
Abstract
This paper investigated the effect of nano-calcium silicate hydrate (n-C-S-H) on the early compressive strength of mineral powder-cement systems under low-temperature curing conditions (5 °C). The hydration mechanism of n-C-S-H in the mineral powder-cement system at different dosages was analyzed by combining it
[...] Read more.
This paper investigated the effect of nano-calcium silicate hydrate (n-C-S-H) on the early compressive strength of mineral powder-cement systems under low-temperature curing conditions (5 °C). The hydration mechanism of n-C-S-H in the mineral powder-cement system at different dosages was analyzed by combining it with XRD, DSC-TG, MIP, and other techniques. The results show that n-C-S-H significantly enhances the early compressive strength of the mineral powder-cement system under low-temperature curing conditions, with optimal results observed at a dosage of 1.0% (mass fraction). The XRD, DSC-TG, and MIP tests reveal that n-C-S-H promotes the hydration of the mineral powder cement, accelerates the generation rate of hydration products, reduces the porosity of the hardened mineral powder-cement slurry, and improves the system’s density.
Full article
(This article belongs to the Section Inorganic Materials and Metal-Organic Frameworks)
►▼
Show Figures
Figure 1
Open AccessCommunication
Improved Vth Stability and Gate Reliability of GaN-Based MIS-HEMTs by Employing Alternating O2 Plasma Treatment
by
Xinling Xie, Qiang Wang, Maolin Pan, Penghao Zhang, Luyu Wang, Yannan Yang, Hai Huang, Xin Hu and Min Xu
Nanomaterials 2024, 14(6), 523; https://doi.org/10.3390/nano14060523 - 14 Mar 2024
Abstract
The Vth stability and gate reliability of AlGaN/GaN metal–insulator–semiconductor high-electron-mobility transistors (MIS-HEMTs) with alternating O2 plasma treatment were systematically investigated in this article. It was found that the conduction band offset at the Al2O3/AlGaN interface was elevated
[...] Read more.
The Vth stability and gate reliability of AlGaN/GaN metal–insulator–semiconductor high-electron-mobility transistors (MIS-HEMTs) with alternating O2 plasma treatment were systematically investigated in this article. It was found that the conduction band offset at the Al2O3/AlGaN interface was elevated to 2.4 eV, which contributed to the suppressed gate leakage current. The time-dependent dielectric breakdown (TDDB) test results showed that the ALD-Al2O3 with the alternating O2 plasma treatment had better quality and reliability. The AlGaN/GaN MIS-HEMT with the alternating O2 plasma treatment demonstrated remarkable advantages in higher Vth stability under high-temperature and long-term gate bias stress.
Full article
(This article belongs to the Special Issue III-Nitride Semiconductors: Design, Characterization, Applications, and Devices)
►▼
Show Figures
Figure 1
Open AccessArticle
Enhanced Adsorption of Methylene Blue Dye on Functionalized Multi-Walled Carbon Nanotubes
by
Ludovica Ceroni, Stefania Benazzato, Samuel Pressi, Laura Calvillo, Ester Marotta and Enzo Menna
Nanomaterials 2024, 14(6), 522; https://doi.org/10.3390/nano14060522 - 14 Mar 2024
Abstract
Carbon nanomaterials are promising adsorbents for dye removal from wastewater also due to their possible surface functionalization that, in principle, can increase the adsorption rate and provide regeneration. To investigate the real advantages of functionalization, we synthesized and characterized through IR, TGA, TEM,
[...] Read more.
Carbon nanomaterials are promising adsorbents for dye removal from wastewater also due to their possible surface functionalization that, in principle, can increase the adsorption rate and provide regeneration. To investigate the real advantages of functionalization, we synthesized and characterized through IR, TGA, TEM, XPS and DLS measurements a multi-walled carbon nanotube (MWCNT) derivative bearing benzenesulfonate groups (MWCNT-S). The obtained material demonstrated to have good dispersibility in water and better capability to adsorb methylene blue (MB) compared to the pristine MWCNT adsorbent. Adsorption kinetic studies showed a very fast process, with a constant significantly higher with respect not only to that of the unfunctionalized MWCNT adsorbent but also to those of widely used activated carbons. Moreover, the adsorption capacity of MWCNT-S is more than doubled with respect to that of the insoluble pristine MWCNT adsorbent, thanks to the dispersibility of the derivatives, providing a larger available surface, and to the possible electrostatic interactions between the cationic MB and the anionic sulfonate groups. Additionally, the reversibility of ionic interactions disclosed the possibility to release the adsorbed cationic pollutant through competition with salts, not only regenerating the adsorbent, but also recovering the dye. Indeed, by treating the adsorbed material for 1 h with 1 M NaCl, a regeneration capacity of 75% was obtained, demonstrating the validity of this strategy.
Full article
(This article belongs to the Special Issue Nanomaterial Application in Environmental Monitoring and Water Treatment)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Nanocrystalline FeMnO3 Powder as Catalyst for Combustion of Volatile Organic Compounds
by
Corneliu Doroftei
Nanomaterials 2024, 14(6), 521; https://doi.org/10.3390/nano14060521 - 14 Mar 2024
Abstract
The paper shows the obtaining of nanocrystalline iron manganite (FeMnO3) powders and their investigation in terms of catalytic properties for a series of volatile organic compounds. The catalyst properties were tested in the catalytic combustion of air-diluted vapors of ethanol, methanol,
[...] Read more.
The paper shows the obtaining of nanocrystalline iron manganite (FeMnO3) powders and their investigation in terms of catalytic properties for a series of volatile organic compounds. The catalyst properties were tested in the catalytic combustion of air-diluted vapors of ethanol, methanol, toluene and xylene at moderate temperatures (50–550 °C). Catalytic combustion of the alcohols starts at temperatures between 180 °C and 230 °C. In the case of ethanol vapors, the conversion starts at 230 °C and increases rapidly reaching a value of around 97% at 300 °C. For temperatures higher than 300 °C, the degree of conversion is kept at the same value. In the case of methanol vapors, the conversion starts at a slightly lower temperature (180 °C), and the degree of conversion reaches the value of 97% at a higher temperature (440 °C) than in the case of ethanol, and it also remains constant as the temperature increases. Catalytic combustion of the hydrocarbons starts at lower temperatures (around 50 °C), the degree of conversion is generally lower, and it increases proportionally with the temperature, with the exception of toluene, which shows an intermediate behavior, reaching values of over 97% at 430 °C. The studied iron manganite can be recommended to achieve catalysts that operate at moderate temperatures for the combustion of some alcohols and, especially, ethanol. The performance of this catalyst with regard to ethanol is close to that of a catalyst that uses noble metals in its composition.
Full article
(This article belongs to the Special Issue Advances in Nano-Enhanced Thermal Functional Materials)
►▼
Show Figures
Figure 1
Open AccessArticle
Role of the Carbon Nanotube Junction in the Mechanical Performance of Carbon Nanotube/Polyethylene Nanocomposites: A Molecular Dynamics Study
by
Xian Shi, Xiaoqiao He and Xuefeng Liu
Nanomaterials 2024, 14(6), 520; https://doi.org/10.3390/nano14060520 - 14 Mar 2024
Abstract
►▼
Show Figures
Carbon nanotube (CNT)-based networks are promising reinforcements for polymer nanocomposites without the issue of CNT agglomeration. In this study, the CNT junction, a vital and representative structure of CNT-based networks, was applied as the reinforcement of the polyethylene (PE) matrix. The tensile properties
[...] Read more.
Carbon nanotube (CNT)-based networks are promising reinforcements for polymer nanocomposites without the issue of CNT agglomeration. In this study, the CNT junction, a vital and representative structure of CNT-based networks, was applied as the reinforcement of the polyethylene (PE) matrix. The tensile properties of the CNT-junction/PE nanocomposite were investigated via molecular dynamics (MD) simulations and compared with those of pure PE matrix and conventional CNT/PE nanocomposites. The CNT junction was found to significantly increase the mechanical properties of the PE matrix. The Young’s modulus, yield strength, and toughness rose by 500%, 100%, and 200%, respectively. This mechanism is related to the enhanced interfacial energy, which makes the polymer matrix denser and stimulates the bond and angle deformations of the polymer chains. Furthermore, the CNT junction demonstrated a more profitable reinforcement efficiency compared to conventional straight CNTs in the PE matrix. Compared to the ordinary CNT/PE model, the improvements in the Young’s modulus and toughness induced by the CNT junction were up to 60% and 25%. This is attributed to the reduced mobility induced by the geometry of the CNT junction and stronger interfacial interactions provided by the Stone–Wales defects of the CNT junction, slowing down the void propagation of the nanocomposite. With the understanding of the beneficial reinforcing effect of the CNT junction, this study provides valuable insights for the design and application of CNT-based networks in polymer nanocomposites.
Full article
Figure 1
Open AccessArticle
Strategic Structural Control of Polyserotonin Nanoparticles and Their Application as pH-Responsive Nanomotors
by
Junyi Hu, Jingjing Cao, Jinwei Lin and Leilei Xu
Nanomaterials 2024, 14(6), 519; https://doi.org/10.3390/nano14060519 - 14 Mar 2024
Abstract
Serotonin-based nanomaterials have been positioned as promising contenders for constructing multifunctional biomedical nanoplatforms due to notable biocompatibility, advantageous charge properties, and chemical adaptability. The elaborately designed structure and morphology are significant for their applications as functional carriers. In this study, we fabricated anisotropic
[...] Read more.
Serotonin-based nanomaterials have been positioned as promising contenders for constructing multifunctional biomedical nanoplatforms due to notable biocompatibility, advantageous charge properties, and chemical adaptability. The elaborately designed structure and morphology are significant for their applications as functional carriers. In this study, we fabricated anisotropic bowl-like mesoporous polyserotonin (PST) nanoparticles with a diameter of approximately 170 nm through nano-emulsion polymerization, employing P123/F127 as a dual-soft template and 1,3,5-trimethylbenzene (TMB) as both pore expander and emulsion template. Their formation can be attributed to the synchronized assembly of P123/F127/TMB, along with the concurrent manifestation of anisotropic nucleation and growth on the TMB emulsion droplet surface. Meanwhile, the morphology of PST nanoparticles can be regulated from sphere- to bowl-like, with a particle size distribution ranging from 432 nm to 100 nm, experiencing a transformation from a dendritic, cylindrical open mesoporous structure to an approximately non-porous structure by altering the reaction parameters. The well-defined mesopores, intrinsic asymmetry, and pH-dependent charge reversal characteristics enable the as-prepared mesoporous bowl-like PST nanoparticles’ potential for constructing responsive biomedical nanomotors through incorporating some catalytic functional materials, 3.5 nm CeO2 nanoenzymes, as a demonstration. The constructed nanomotors demonstrate remarkable autonomous movement capabilities under physiological H2O2 concentrations, even at an extremely low concentration of 0.05 mM, showcasing the 51.58 body length/s velocity. Furthermore, they can also respond to physiological pH values ranging from 4.4 to 7.4, exhibiting reduced mobility with increasing pH. This charge reversal-based responsive nanomotor design utilizing PST nanoparticles holds great promise for advancing the application of nanomotors within complex biological systems.
Full article
(This article belongs to the Special Issue Advances in Stimuli-Responsive Nanomaterials II)
►▼
Show Figures
Figure 1
Open AccessArticle
Optical Analysis of Perovskite III-V Nanowires Interpenetrated Tandem Solar Cells
by
Matteo Tirrito, Phillip Manley, Christiane Becker, Eva Unger and Magnus T. Borgström
Nanomaterials 2024, 14(6), 518; https://doi.org/10.3390/nano14060518 - 14 Mar 2024
Abstract
Multi-junction photovoltaics approaches are being explored to mitigate thermalization losses that occur in the absorption of high-energy photons. However, the design of tandem cells faces challenges such as light reflection and parasitic absorption. Nanostructures have emerged as promising solutions due to their anti-reflection
[...] Read more.
Multi-junction photovoltaics approaches are being explored to mitigate thermalization losses that occur in the absorption of high-energy photons. However, the design of tandem cells faces challenges such as light reflection and parasitic absorption. Nanostructures have emerged as promising solutions due to their anti-reflection properties, which enhances light absorption. III-V nanowires (NWs) solar cells can achieve strong power conversion efficiencies, offering the advantage of potentially integrating tunnel diodes within the same fabrication process. Metal halide perovskites (MHPs) have gained attention for their optoelectronic attributes and cost-effectiveness. Notably, both material classes allow for tunable bandgaps. This study explores the integration of MHPs with III-V NWs solar cells in both two-terminal and three-terminal configurations. Our primary focus lies in the optical analysis of a tandem design using III-V semiconductor nanowire arrays in combination with perovskites, highlighting their potential for tandem applications. The space offered by the compact footprint of NW arrays is used in an interpenetrated tandem structure. We systematically optimize the bottom cell, addressing reflectivity and parasitic absorption, and extend to a full tandem structure, considering experimentally feasible thicknesses. Simulation of a three-terminal structure highlights a potential increase in efficiency, decoupling the operating points of the subcells. The two-terminal analysis underscores the benefits of nanowires in reducing reflection and achieving a higher matched current between the top and the bottom cells. This research provides significant insights into NW tandem solar cell optics, enhancing our understanding of their potential to improve photovoltaic performance.
Full article
(This article belongs to the Section Solar Energy and Solar Cells)
►▼
Show Figures
Figure 1
Journal Menu
► ▼ Journal Menu-
- Nanomaterials Home
- Aims & Scope
- Editorial Board
- Reviewer Board
- Topical Advisory Panel
- Instructions for Authors
- Special Issues
- Topics
- Sections & Collections
- Article Processing Charge
- Indexing & Archiving
- Editor’s Choice Articles
- Most Cited & Viewed
- Journal Statistics
- Journal History
- Journal Awards
- Society Collaborations
- Conferences
- Editorial Office
Journal Browser
► ▼ Journal BrowserHighly Accessed Articles
Latest Books
E-Mail Alert
News
Topics
Topic in
Applied Sciences, Energies, Materials, Nanoenergy Advances, Nanomaterials
Nanomaterials for Energy and Environmental Applications
Topic Editors: Robert A. Varin, Geng ZhongDeadline: 31 March 2024
Topic in
Applied Sciences, Energies, Materials, Nanoenergy Advances, Nanomaterials
Applications of Nanomaterials in Energy Systems, 2nd Volume
Topic Editors: Eleftheria C. Pyrgioti, Ioannis F. Gonos, Diaa-Eldin A. MansourDeadline: 30 April 2024
Topic in
Materials, Nanomaterials, Photonics, Polymers, Applied Sciences, Sensors
Optical and Optoelectronic Properties of Materials and Their Applications
Topic Editors: Zhiping Luo, Gibin George, Navadeep ShrivastavaDeadline: 20 May 2024
Topic in
Biomedicines, Cancers, JFB, Nanomaterials, Polymers
Advanced Functional Materials for Regenerative Medicine
Topic Editors: Antonino Morabito, Luca ValentiniDeadline: 6 June 2024
Conferences
Special Issues
Special Issue in
Nanomaterials
Electromagnetic and Microwave Absorption Properties of Magnetic Nanomaterials and Superstructure
Guest Editors: Xiaohui Liang, Zengming ManDeadline: 20 March 2024
Special Issue in
Nanomaterials
Planar Optical Components Based on the Prepatterned Surfaces, Metasurfaces, and Hybrid Nanomaterials II
Guest Editor: Josep Canet-FerrerDeadline: 1 April 2024
Special Issue in
Nanomaterials
Metrology for Energy Nanomaterials
Guest Editors: François Piquemal, Séverine Gomès, Luca Boarino, Burkhard BeckhoffDeadline: 20 April 2024
Special Issue in
Nanomaterials
Nano-Photonics and Meta-Nanomaterials
Guest Editor: Suchand SandeepDeadline: 10 May 2024
Topical Collections
Topical Collection in
Nanomaterials
Process Intensification, Process Design and Green Techniques for Nanomaterials Production and Applications
Collection Editors: Marco Stoller, Giorgio Vilardi
Topical Collection in
Nanomaterials
Magnetic Nanostructured Materials: Synthesis, Characterization and Their Cutting-Edge Applications
Collection Editors: Vasileios Tzitzios, Georgia Basina
Topical Collection in
Nanomaterials
The Fourth State of Engineering: Nanoengineered Materials and Coatings Facilitated by Plasma Techniques
Collection Editors: Krasimir Vasilev, Kostya (Ken) Ostrikov, Thomas Michl, Akash Bachhuka
Topical Collection in
Nanomaterials
Nanoarchitectonics of the Fourth Fundamental Electronic Component: Memristor, Meminductor and Memcapacitor
Collection Editors: Firman Simanjuntak, Yao-Feng Chang, Sridhar Chandrasekaran