Journal Description
Gels
Gels
is an international, peer-reviewed, open access journal on physical and chemical gels published monthly online by MDPI.
- Open Access— free for readers, with article processing charges (APC) paid by authors or their institutions.
- High visibility: indexed within Scopus, SCIE (Web of Science), PubMed, PMC, CAPlus / SciFinder, and other databases.
- Journal Rank: JCR - Q1 (Polymer Science)
- Rapid Publication: manuscripts are peer-reviewed and a first decision is provided to authors approximately 11.1 days after submission; acceptance to publication is undertaken in 2.7 days (median values for papers published in this journal in the second half of 2023).
- Recognition of Reviewers: reviewers who provide timely, thorough peer-review reports receive vouchers entitling them to a discount on the APC of their next publication in any MDPI journal, in appreciation of the work done.
- Testimonials: See what our editors and authors say about the Gels.
Impact Factor:
4.6 (2022);
5-Year Impact Factor:
5.2 (2022)
Latest Articles
The Influence of Reinforced Fibers and Opacifiers on the Effective Thermal Conductivity of Silica Aerogels
Gels 2024, 10(5), 300; https://doi.org/10.3390/gels10050300 - 26 Apr 2024
Abstract
Fiber–particle-reinforced silica aerogels are widely applied in thermal insulation. Knowing their effective thermal conductivity (ETC) and radiative characteristics under high temperatures is necessary to improve their performance. This article first analyzes the radiation characteristics of silica aerogels doped with opacifier particles and reinforced
[...] Read more.
Fiber–particle-reinforced silica aerogels are widely applied in thermal insulation. Knowing their effective thermal conductivity (ETC) and radiative characteristics under high temperatures is necessary to improve their performance. This article first analyzes the radiation characteristics of silica aerogels doped with opacifier particles and reinforced fibers, and then a universal model is established to predict the ETC. Furthermore, the impacts of different parameters of opacifier particles and reinforced fibers on the thermal insulation performance of silica aerogels are investigated. The results indicate that SiC exhibits comparatively strong absorption characteristics, making it a good alternative for opacifiers to improve thermal insulation performance under high temperatures. For the given type and volume fraction of opacifier particles, there exists an optimal diameter and volume fraction to achieve the best insulation performance of silica aerogel under a certain temperature. Considering that SiO2 fibers exhibit a limited extinction capability and higher conductive thermal conductivity under high temperatures, for fiber–particle-reinforced silica aerogels, it is beneficial for their insulation performance to reduce the fiber volume fraction when the required mechanical properties are satisfied.
Full article
(This article belongs to the Special Issue Recent Advances in Aerogels and Aerogel Composites)
Open AccessArticle
Effect of Agavins and Agave Syrup Use in the Formulation of a Synbiotic Gelatin Gummy with Microcapsules of Saccharomyces Boulardii
by
Liliana K. Vigil-Cuate, Sandra V. Avila-Reyes, Brenda H. Camacho-Díaz, Humberto Hernández-Sánchez, Perla Osorio-Díaz, Antonio R. Jiménez-Aparicio, Paz Robert and Martha L. Arenas-Ocampo
Gels 2024, 10(5), 299; https://doi.org/10.3390/gels10050299 - 26 Apr 2024
Abstract
Agavins are reserve carbohydrates found in agave plants; they present texture-modifying properties and prebiotic capacity by increasing the viability of the intestinal microbiota. Through its hydrolysis, agave syrup (AS) can be obtained and can be used as a sweetener in food matrices. The
[...] Read more.
Agavins are reserve carbohydrates found in agave plants; they present texture-modifying properties and prebiotic capacity by increasing the viability of the intestinal microbiota. Through its hydrolysis, agave syrup (AS) can be obtained and can be used as a sweetener in food matrices. The objective of this work was to evaluate the effect of the variation in the content of agavins and AS on the physical, structural, and viability properties of Saccharomyces boulardii encapsulates incorporated into gelatin gummies. An RSM was used to obtain an optimized formulation of gelatin gummies. The properties of the gel in the gummy were characterized by a texture profile analysis and Aw. The humidity and sugar content were determined. A sucrose gummy was used as a control for the variable ranges. Alginate microcapsules containing S. boulardii were added to the optimized gummy formulation to obtain a synbiotic gummy. The viability of S. boulardii and changes in the structure of the alginate gel of the microcapsules in the synbiotic gummy were evaluated for 24 days by image digital analysis (IDA). The agavins and agave syrup significantly affected the texture properties (<1 N) and the Aw (>0.85). The IDA showed a change in the gel network and an increase in viability by confocal microscopy from day 18. The number of pores in the gel increased, but their size decreased with an increase in the number of S. boulardii cells. Agavins and cells alter the structure of capsules in gummies without affecting their viability.
Full article
(This article belongs to the Special Issue Modification of Gels in Creating New Food Products)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Development of Low-Molecular-Weight Gelator/Polymer Composite Materials Utilizing the Gelation and Swelling Process of Polymeric Materials
by
Yutaka Ohsedo and Chinatsu Takagi
Gels 2024, 10(5), 298; https://doi.org/10.3390/gels10050298 - 26 Apr 2024
Abstract
The creation of polymer composite materials by compositing fillers into polymer materials is an effective method of improving the properties of polymer materials, and the development of new fillers and their novel composite methods is expected to lead to the creation of new
[...] Read more.
The creation of polymer composite materials by compositing fillers into polymer materials is an effective method of improving the properties of polymer materials, and the development of new fillers and their novel composite methods is expected to lead to the creation of new polymer composite materials. In this study, we develop a new filler material made of low-molecular-weight gelators by applying a gelation process that simultaneously performs the swelling (gelation) of crosslinked polymer materials and the self-assembly of low-molecular-weight gelators into low-dimensional crystals in organic solvents within polymer materials. The gelation process of crosslinking rubber-based polymers using alkylhydrazides/toluene as the low-molecular-weight gelator allowed us to composite self-assembled sheet-like crystals of alkylhydrazides as fillers in polymeric materials, as suggested by various microscopic observations, including infrared absorption measurements, small-angle X-ray diffraction measurements and thermal analysis, microscopy, and infrared absorption measurements. Furthermore, tensile tests of the composite materials demonstrated that the presence of fillers improved both the Young’s modulus and the tensile strength, as well as the elongation at yield. Additionally, heat treatment was shown to facilitate filler dispersion and enhance the mechanical properties. The findings demonstrate the potential of self-assembled sheet-like crystals of low-molecular-weight gelators as novel filler materials for polymers. The study’s composite method utilizing gelators via gelation proved effective.
Full article
(This article belongs to the Section Gel Processing and Engineering)
►▼
Show Figures
Figure 1
Open AccessArticle
Preparation of Gel Forming Polymer-Based Sprays for First Aid Care of Skin Injuries
by
Patrícia Alves, Diana Luzio, Kevin de Sá, Ilídio Correia and Paula Ferreira
Gels 2024, 10(5), 297; https://doi.org/10.3390/gels10050297 - 25 Apr 2024
Abstract
Currently, there are several types of materials for the treatment of wounds, burns, and other topical injuries available on the market. The most used are gauzes and compresses due to their fluid absorption capacity; however, these materials adhere to the surface of the
[...] Read more.
Currently, there are several types of materials for the treatment of wounds, burns, and other topical injuries available on the market. The most used are gauzes and compresses due to their fluid absorption capacity; however, these materials adhere to the surface of the lesions, which can lead to further bleeding and tissue damage upon removal. In the present study, the development of a polymer-based gel that can be applied as a spray provides a new vision in injury protection, respecting the requirements of safety, ease, and quickness of both applicability and removal. The following polymeric sprays were developed to further obtain gels based on different polymers: hydroxypropyl cellulose (HPC), polyvinyl pyrrolidone (PVP) and hydroxypropyl methylcellulose (HPMC) using polyethylene glycol (PEG) as a plasticizer. The developed sprays revealed suitable properties for use in topical injuries. A protective film was obtained when sprayed on a surface through a casting mechanism. The obtained films adhered to the surface of biological tissue (pig muscle), turning into a gel when the exudate was absorbed, and proved to be washable with saline solution and contribute to the clotting process. Moreover, biocompatibility results showed that all materials were biocompatible, as cell viability was over 90% for all the materials.
Full article
(This article belongs to the Special Issue Advanced Hydrogels for Regenerative Medicine and Tissue Engineering (2nd Edition))
►▼
Show Figures
Figure 1
Open AccessArticle
Fluorescence ‘Turn-on’ Probe for Chromium Reduction, Adsorption and Detection Based on Cellulosic Nitrogen-Doped Carbon Quantum Dots Hydrogels
by
Hebat-Allah S. Tohamy
Gels 2024, 10(5), 296; https://doi.org/10.3390/gels10050296 - 25 Apr 2024
Abstract
This paper proposes a new, highly effective fluorescence test for Cr(VI) detection. This method utilizes a hydrogel composed of hydroxyethyl cellulose (HEC), nitrogen-doped carbon quantum dots (N–CQDs), and poly(co-acrylamido-2-methyl-1-propane sulfonic acid) (AMPS). The N–CQDs were successfully synthesized using a simple microwave method, and
[...] Read more.
This paper proposes a new, highly effective fluorescence test for Cr(VI) detection. This method utilizes a hydrogel composed of hydroxyethyl cellulose (HEC), nitrogen-doped carbon quantum dots (N–CQDs), and poly(co-acrylamido-2-methyl-1-propane sulfonic acid) (AMPS). The N–CQDs were successfully synthesized using a simple microwave method, and then conjugated with HEC and AMPS. The higher adsorption (99.41%) and higher reduction rate in H1 likely stems from both the presence of N–CQDs (absent in HB) and their increased free functional groups (compared to H2/H3, where N–CQDs block them). This facilitates the release (desorption) of Cr(VI) from the hydrogels, making it more available for reduction to the less toxic Cr(III). The fluorescent brightness of the HEC-N–CQDs-g-poly(AMPS) hydrogel increases gradually when Cr(VI) is added in amounts ranging from 15 to 120 mg/L. The fluorescent enhancement of the HEC-N–CQDs-g-poly(AMPS) hydrogel appeared to exhibit a good linear relationship with the 15–120 mg of the Cr(VI) concentration, with a detection limit of 0.0053 mg/L, which is lower than the standard value published by WHO. Our study found that the HEC-N–CQDs-g-poly(AMPS) hydrogel served effectively as a fluorescent probe for Cr(VI) detection in aqueous solutions, demonstrating high sensitivity.
Full article
(This article belongs to the Special Issue Recent Progress of Hydrogel Sensors and Biosensors)
►▼
Show Figures
Figure 1
Open AccessReview
Biomedical Trends in Stimuli-Responsive Hydrogels with Emphasis on Chitosan-Based Formulations
by
Weronika Kruczkowska, Julia Gałęziewska, Katarzyna Grabowska, Gabriela Liese, Paulina Buczek, Karol Kamil Kłosiński, Mateusz Kciuk, Zbigniew Pasieka, Żaneta Kałuzińska-Kołat and Damian Kołat
Gels 2024, 10(5), 295; https://doi.org/10.3390/gels10050295 - 25 Apr 2024
Abstract
Biomedicine is constantly evolving to ensure a significant and positive impact on healthcare, which has resulted in innovative and distinct requisites such as hydrogels. Chitosan-based formulations stand out for their versatile utilization in drug encapsulation, transport, and controlled release, which is complemented by
[...] Read more.
Biomedicine is constantly evolving to ensure a significant and positive impact on healthcare, which has resulted in innovative and distinct requisites such as hydrogels. Chitosan-based formulations stand out for their versatile utilization in drug encapsulation, transport, and controlled release, which is complemented by their biocompatibility, biodegradability, and non-immunogenic nature. Stimuli-responsive hydrogels, also known as smart hydrogels, have strictly regulated release patterns since they respond and adapt based on various external stimuli. Moreover, they can imitate the intrinsic tissues’ mechanical, biological, and physicochemical properties. These characteristics allow stimuli-responsive hydrogels to provide cutting-edge, effective, and safe treatment. Constant progress in the field necessitates an up-to-date summary of current trends and breakthroughs in the biomedical application of stimuli-responsive chitosan-based hydrogels, which was the aim of this review. General data about hydrogels sensitive to ions, pH, redox potential, light, electric field, temperature, and magnetic field are recapitulated. Additionally, formulations responsive to multiple stimuli are mentioned. Focusing on chitosan-based smart hydrogels, their multifaceted utilization was thoroughly described. The vast application spectrum encompasses neurological disorders, tumors, wound healing, and dermal infections. Available data on smart chitosan hydrogels strongly support the idea that current approaches and developing novel solutions are worth improving. The present paper constitutes a valuable resource for researchers and practitioners in the currently evolving field.
Full article
(This article belongs to the Special Issue Recent Developments in Chitosan Hydrogels)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Development and Characterization of Gelatin-Based Hydrogels Containing Triblock Copolymer and Phytic Acid
by
Njomza Ajvazi, Ingrid Milošev, Romana Cerc Korošec, Peter Rodič and Bojan Božić
Gels 2024, 10(5), 294; https://doi.org/10.3390/gels10050294 - 25 Apr 2024
Abstract
In recent research, significant interest has been directed towards gelatin-based hydrogels due to their affordable price, extensive availability, and biocompatibility, making them promising candidates for various biomedical applications. The development and characterization of novel hydrogels formed from varying ratios of gelatin, triblock copolymer
[...] Read more.
In recent research, significant interest has been directed towards gelatin-based hydrogels due to their affordable price, extensive availability, and biocompatibility, making them promising candidates for various biomedical applications. The development and characterization of novel hydrogels formed from varying ratios of gelatin, triblock copolymer Pluronic F-127, and phytic acid have been presented. Swelling properties were examined at different pH levels. The morphology of hydrogels and their thermal properties were analyzed using scanning electron microscopy (SEM), thermogravimetric analysis (TG), and differential scanning calorimetry (DSC). Fourier-transform infrared (FTIR) analysis of the hydrogels was also performed. The introduction of phytic acid in the hydrogel plays a crucial role in enhancing the intermolecular interactions within gelatin-based hydrogels, contributing to a more stable, elastic, and robust network structure.
Full article
(This article belongs to the Special Issue Gel-Based Materials: Preparations and Characterization (2nd Edition))
►▼
Show Figures
Figure 1
Open AccessArticle
Silica-Poly(Vinyl Alcohol) Composite Aerogel: A Promising Electrolyte for Solid-State Sodium Batteries
by
João Pedro Vareda, Ana Clotilde Fonseca, Ana Cristina Faria Ribeiro and Ana Dora Rodrigues Pontinha
Gels 2024, 10(5), 293; https://doi.org/10.3390/gels10050293 - 25 Apr 2024
Abstract
The transition from fossil fuels is in part limited by our inability to store energy at different scales. Batteries are therefore in high demand, and we need them to store more energy, be more reliable, durable and have less social and environmental impact.
[...] Read more.
The transition from fossil fuels is in part limited by our inability to store energy at different scales. Batteries are therefore in high demand, and we need them to store more energy, be more reliable, durable and have less social and environmental impact. Silica-poly(vinyl alcohol) (PVA) composite aerogels doped with sodium perchlorate were synthesized as novel electrolytes for potential application in solid-state sodium batteries. The aerogels, synthesized by one-pot synthesis, are light (up to 214 kg m−3), porous (~85%), exhibit reduced shrinkage on drying (up to 12%) and a typical silica aerogel microstructure. The formation of a silica network and the presence of PVA and sodium perchlorate in the composite were confirmed by FTIR and TGA. The XRD analysis also shows that a predominantly amorphous structure is obtained, as crystalline phases of polymer and salt are present in a very reduced amount. The effects of increasing polymer and sodium salt concentrations on the ionic conductivity, assessed via electrochemical impedance spectroscopy, were studied. At a PVA concentration of 15% (w/w silica precursors), the sodium conduction improved significantly up to (1.1 ± 0.3) × 10−5 S cm−1. Thus, this novel material has promising properties for the envisaged application.
Full article
(This article belongs to the Special Issue Advances in Synthetic and Bio-Based Aerogels: Mechanical Properties, Thermal Insulation, and Environmental Remediation)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Fabrication of the SiC/HfC Composite Aerogel with Ultra-Low Thermal Conductivity and Excellent Compressive Strength
by
Wei Wang, Qi You, Zhanwu Wu, Sheng Cui and Weimin Shen
Gels 2024, 10(5), 292; https://doi.org/10.3390/gels10050292 - 24 Apr 2024
Abstract
Aerogels, as a new type of high-temperature-resistant insulation material, find extensive application in aerospace, high-temperature industrial furnaces, new energy batteries, and various other domains, yet still face some limitations such as inadequate temperature resistance and pronounced brittleness. In this work, SiC/HfC composite aerogels
[...] Read more.
Aerogels, as a new type of high-temperature-resistant insulation material, find extensive application in aerospace, high-temperature industrial furnaces, new energy batteries, and various other domains, yet still face some limitations such as inadequate temperature resistance and pronounced brittleness. In this work, SiC/HfC composite aerogels were prepared through a combination of sol-gel method, atmospheric pressure drying technique, and carbothermal reduction reaction. The effects of different molar ratios, calcination time, and temperatures on the microstructural features and physicochemical properties of the resulting SiC/HfC composite aerogels were investigated. The aerogel exhibited an elevated BET-specific surface area of 279.75 m2/g, while the sample displayed an extraordinarily low thermal conductivity of 0.052 W/(m·K). Most notably, the compressive strength reached an outstanding 5.93 MPa after a carbonization temperature of 1500 °C, far exceeding the values reported in prior aerogel studies. This research provided an innovative approach for advancing the development of carbide aerogels in the realm of high-temperature applications.
Full article
(This article belongs to the Special Issue Preparation and Characteristics of Aerogel-Based Materials)
►▼
Show Figures
Figure 1
Open AccessArticle
Silver Dendritic Gels with Luminescence and Aggregation-Induced Emission Effect
by
Verónica Iguarbe, Pilar Romero, Anabel Elduque and Raquel Giménez
Gels 2024, 10(5), 291; https://doi.org/10.3390/gels10050291 - 24 Apr 2024
Abstract
This work reports on a novel family of silver metallogels based on discrete coordination complexes. Structurally, they consist of dendrimers containing a trinuclear silver metallacycle at the core, with the general formula [M(μ-pz)]3, and poly(benzyl)ether branched structures with different numbers or
[...] Read more.
This work reports on a novel family of silver metallogels based on discrete coordination complexes. Structurally, they consist of dendrimers containing a trinuclear silver metallacycle at the core, with the general formula [M(μ-pz)]3, and poly(benzyl)ether branched structures with different numbers or terminal alkoxy chains at the periphery. These silver metallodendrimers are able to gel low-polarity solvents such as dodecane or cyclohexane, giving rise to luminescent organogels at room temperature with the property of aggregation-induced emission (AIE). This property means that in solution or the sol state, they are weak emitters, but in the gel state, luminescence is considerably increased. In this particular case, they exhibit blue luminescence. Two different dendritic scaffolds have been studied, finding significant differences in solubility, gel formation and dependence of luminescence on temperature. The results show that properly tailored silver gelators can show luminescence in the gel state.
Full article
(This article belongs to the Special Issue New Insights and Challenges of Gels: Smart Materials, Optoelectronic and Biomedical Applications)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Post-Irradiation Behavior of Colored PVA-Based Films Containing Ag Nanoparticles as Radiation Detectors/Exposure Indicators
by
Linas Kudrevicius, Evelina Jaselskė, Gabrielius Stankus, Shirin Arslonova and Diana Adliene
Gels 2024, 10(5), 290; https://doi.org/10.3390/gels10050290 - 24 Apr 2024
Abstract
Ionizing radiation covers a broad spectrum of applications. Since radioactive/radiation pollution is directly related to radiation risk, radiation levels should be strictly controlled. Different detection methods can be applied for radiation registration and monitoring. In this paper, radiation-induced variations in the optical properties
[...] Read more.
Ionizing radiation covers a broad spectrum of applications. Since radioactive/radiation pollution is directly related to radiation risk, radiation levels should be strictly controlled. Different detection methods can be applied for radiation registration and monitoring. In this paper, radiation-induced variations in the optical properties of silver-enriched PVA-based hydrogel films with and without azo dye (Toluidine blue O, TBO, and Methyl red, MR) additives were investigated, and the feasibility of these free-standing films to serve as radiation detectors/exposure indicators was assessed. AgNO3 admixed with PVA gel was used as a source for the radiation-induced synthesis of silver nanoparticles (AgNPs) in irradiated gel films. Three types of sensors were prepared: silver-enriched PVA films containing a small amount of glycerol (AgPVAGly); silver-enriched PVA films with toluidine blue adducts (AgPVAGlyTBO); and silver-enriched PVA films with methyl red additives (AgPVAGlyMR). The selection of TBO and MR was based on their sensitivity to irradiation. The irradiation of the samples was performed in TrueBeam2.1 (VARIAN) using 6 MeV photons. Different doses up to 10 Gy were delivered to the films. The sensitivity of the films was assessed by analyzing the characteristic UV-Vis absorbance peaks on the same day as irradiation and 7, 30, 45, 90, and 180 days after irradiation. It was found that the addition of azo dyes led to an enhanced radiation sensitivity of the AgNPs containing films (0.6 Gy−1 for AgPVAGlyTBO and 0.4 Gy−1 for AgPVAGlyMR) irradiated with <2 Gy doses, indicating their applicability as low-dose exposure indicators. The irradiated films were less sensitive to higher doses. Almost no dose fading was detected between the 7th and 45th day after irradiation. Based on the obtained results, competing AgNP formation and color-bleaching effects in the AgPVAGly films with dye additives are discussed.
Full article
(This article belongs to the Special Issue Advances in Gel Films)
►▼
Show Figures
Figure 1
Open AccessArticle
Copper-Chelated Chitosan Microgels for the Selective Enrichment of Small Cationic Peptides
by
Jean-Christophe Jacquier, Ciara Duffy, Michael O’Sullivan and Eugène Dillon
Gels 2024, 10(5), 289; https://doi.org/10.3390/gels10050289 - 24 Apr 2024
Abstract
Copper-chelated chitosan microgels were investigated as an immobilized metal affinity chromatography (IMAC) phase for peptide separation. The copper-crosslinked chitosan beads were shown to strongly interact with a range of amino acids, in a wide range of pH and saline conditions. The beads exhibited
[...] Read more.
Copper-chelated chitosan microgels were investigated as an immobilized metal affinity chromatography (IMAC) phase for peptide separation. The copper-crosslinked chitosan beads were shown to strongly interact with a range of amino acids, in a wide range of pH and saline conditions. The beads exhibited an affinity that seemed to depend on the isoelectric point of the amino acid, with the extent of uptake increasing with decreasing isoelectric point. This selective interaction with anionic amino acids resulted in a significant relative enrichment of the supernatant solution in cationic amino acids. The beads were then studied as a novel fractionation system for complex milk hydrolysates. The copper chitosan beads selectively removed larger peptides from the hydrolysate aqueous solution, yielding a solution relatively enriched in medium and smaller peptides, which was characterized both quantitatively and qualitatively by size exclusion chromatography (SEC). Liquid chromatography–mass spectrometry (LCMS) work provided comprehensive data on a peptide sequence level and showed that a depletion of the anionic peptides by the beads resulted in a relative enrichment of the cationic peptides in the supernatant solution. It could be concluded that after fractionation a dramatic relative enrichment in respect to small- and medium-sized cationic peptides in the solution, characteristics that have been linked to bioactivities, such as anti-microbial and cell-penetrating properties. The results demonstrate the use of the chitosan copper gel bead system in lab scale fractionation of complex hydrolysate mixtures, with the potential to enhance milk hydrolysate bioactivity.
Full article
(This article belongs to the Special Issue Gels in Separation Science)
►▼
Show Figures
Figure 1
Open AccessArticle
UCST-Type Thermoresponsive Sol–Gel Transition Triblock Copolymer Containing Zwitterionic Polymer Blocks
by
Akifumi Kawamura, Ryogo Takahashi and Takashi Miyata
Gels 2024, 10(5), 288; https://doi.org/10.3390/gels10050288 - 24 Apr 2024
Abstract
Thermoresponsive sol–gel transition polymers are of significant interest because of their fascinating biomedical applications, including as drug reservoirs for drug delivery systems and scaffolds for tissue engineering. Although extensive research has been conducted on lower critical solution temperature (LCST)-type sol–gel transition polymers, there
[...] Read more.
Thermoresponsive sol–gel transition polymers are of significant interest because of their fascinating biomedical applications, including as drug reservoirs for drug delivery systems and scaffolds for tissue engineering. Although extensive research has been conducted on lower critical solution temperature (LCST)-type sol–gel transition polymers, there have been few reports on upper critical solution temperature (UCST)-type sol–gel transition polymers. In this study, we designed an ABA-type triblock copolymer composed of a poly(ethylene glycol) (PEG) block and zwitterionic polymer blocks that exhibit UCST-type thermoresponsive phase transitions. A sulfobetaine (SB) monomer with both ammonium and sulfonate (–SO3) groups in its side chain or a sulfabetaine (SaB) monomer with both ammonium and sulfate (–OSO3) groups in its side chain was polymerized from both ends of the PEG block via reversible addition–fragmentation chain-transfer (RAFT) polymerization to obtain PSB-PEG-PSB and PSaB-PEG-PSaB triblock copolymers, respectively. Although an aqueous solution containing the PSB-PEG-PSB triblock copolymer showed an increase in viscosity upon cooling, it did not undergo a sol-to-gel transition. In contrast, a sol-to-gel transition was observed when a phosphate-buffered saline containing PSaB-PEG-PSaB was cooled from 80 °C to 25 °C. The PSaB blocks with –OSO3 groups exhibited a stronger dipole–dipole interaction than conventional SB with –SO3 groups, leading to intermolecular association and the formation of a gel network composed of PSaB assemblies bridged with PEG. The fascinating UCST-type thermoresponsive sol–gel transition properties of the PSaB-PEG-PSaB triblock copolymer suggest that it can provide a useful platform for designing smart biomaterials, such as drug delivery reservoirs and cell culture scaffolds.
Full article
(This article belongs to the Special Issue Recent Advances in Thermoreversible Gelation)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Preparation of Peptide-Based Magnetogels for Removing Organic Dyes from Water
by
Farid Hajareh Haghighi, Roya Binaymotlagh, Paula Stefana Pintilei, Laura Chronopoulou and Cleofe Palocci
Gels 2024, 10(5), 287; https://doi.org/10.3390/gels10050287 - 24 Apr 2024
Abstract
Water pollution by organic dyes represents a major health and environmental issue. Despite the fact that peptide-based hydrogels are considered to be optimal absorbents for removing such contaminants, hydrogel systems often suffer from a lack of mechanical stability and complex recovery. Recently, we
[...] Read more.
Water pollution by organic dyes represents a major health and environmental issue. Despite the fact that peptide-based hydrogels are considered to be optimal absorbents for removing such contaminants, hydrogel systems often suffer from a lack of mechanical stability and complex recovery. Recently, we developed an enzymatic approach for the preparation of a new peptide-based magnetogel containing polyacrylic acid-modified γ-Fe2O3 nanoparticles (γ-Fe2O3NPs) that showed the promising ability to remove cationic metal ions from aqueous phases. In the present work, we tested the ability of the magnetogel formulation to remove three model organic dyes: methyl orange, methylene blue, and rhodamine 6G. Three different hydrogel-based systems were studied, including: (1) Fmoc-Phe3 hydrogel; (2) γ-Fe2O3NPs dispersed in the peptide-based gel (Fe2O3NPs@gel); and (3) Fe2O3NPs@gel with the application of a magnetic field. The removal efficiencies of such adsorbents were evaluated using two different experimental set-ups, by placing the hydrogel sample inside cuvettes or, alternatively, by placing them inside syringes. The obtained peptide magnetogel formulation could represent a valuable and environmentally friendly alternative to currently employed adsorbents.
Full article
(This article belongs to the Special Issue Gels for Removal and Adsorption (2nd Edition))
►▼
Show Figures
Figure 1
Open AccessReview
A Review of High-Temperature Aerogels: Composition, Mechanisms, and Properties
by
Conghui Wang, Letian Bai, Hongxin Xu, Shengjian Qin, Yanfang Li and Guanglei Zhang
Gels 2024, 10(5), 286; https://doi.org/10.3390/gels10050286 - 23 Apr 2024
Abstract
High-temperature aerogels have garnered significant attention as promising insulation materials in various industries such as aerospace, automotive manufacturing, and beyond, owing to their remarkable thermal insulation properties coupled with low density. With advancements in manufacturing techniques, the thermal resilience of aerogels has considerable
[...] Read more.
High-temperature aerogels have garnered significant attention as promising insulation materials in various industries such as aerospace, automotive manufacturing, and beyond, owing to their remarkable thermal insulation properties coupled with low density. With advancements in manufacturing techniques, the thermal resilience of aerogels has considerable improvements. Notably, polyimide-based aerogels can endure temperatures up to 1000 °C, zirconia-based aerogels up to 1300 °C, silica-based aerogels up to 1500 °C, alumina-based aerogels up to 1800 °C, and carbon-based aerogels can withstand up to 2500 °C. This paper systematically discusses recent advancements in the thermal insulation performance of these five materials. It elaborates on the temperature resistance of aerogels and elucidates their thermal insulation mechanisms. Furthermore, it examines the impact of doping elements on the thermal conductivity of aerogels and consolidates various preparation methods aimed at producing aerogels capable of withstanding temperatures. In conclusion, by employing judicious composition design strategies, it is anticipated that the maximum tolerance temperature of aerogels can surpass 2500 °C, thus opening up new avenues for their application in extreme thermal environments.
Full article
(This article belongs to the Special Issue Synthesis and Application of Aerogel)
►▼
Show Figures
Figure 1
Open AccessArticle
Silicon-Doped Carbon Dots Crosslinked Carboxymethyl Cellulose Gel: Detection and Adsorption of Fe3+
by
Zhengdong Zhao, Yichang Jing, Yuan Shen, Yang Liu, Jiaqi Wang, Mingjian Ma, Jiangbo Pan, Di Wang, Chengyu Wang and Jian Li
Gels 2024, 10(5), 285; https://doi.org/10.3390/gels10050285 - 23 Apr 2024
Abstract
The excessive emission of iron will pollute the environment and harm human health, so the fluorescence detection and adsorption of Fe3+ are of great significance. In the field of water treatment, cellulose-based gels have attracted wide attention due to their excellent properties
[...] Read more.
The excessive emission of iron will pollute the environment and harm human health, so the fluorescence detection and adsorption of Fe3+ are of great significance. In the field of water treatment, cellulose-based gels have attracted wide attention due to their excellent properties and environmental friendliness. If carbon dots are used as a crosslinking agent to form a gel with cellulose, it can not only improve mechanical properties but also show good biocompatibility, reactivity, and fluorescence properties. In this study, silicon-doped carbon dots/carboxymethyl cellulose gel (DCG) was successfully prepared by chemically crosslinking biomass-derived silicon-doped carbon dots with carboxymethyl cellulose. The abundant crosslinking points endow the gel with excellent mechanical properties, with a compressive strength reaching 294 kPa. In the experiment on adsorbing Fe3+, the theoretical adsorption capacity reached 125.30 mg/g. The introduction of silicon-doped carbon dots confers the gel with excellent fluorescence properties and a good selective response to Fe3+. It exhibits a good linear relationship within the concentration range of 0–100 mg/L, with a detection limit of 0.6595 mg/L. DCG appears to be a good application prospect in the adsorption and detection of Fe3+.
Full article
(This article belongs to the Special Issue Gels for Removal and Adsorption (2nd Edition))
►▼
Show Figures
Figure 1
Open AccessReview
Liposome–Hydrogel Composites for Controlled Drug Delivery Applications
by
Roya Binaymotlagh, Farid Hajareh Haghighi, Laura Chronopoulou and Cleofe Palocci
Gels 2024, 10(4), 284; https://doi.org/10.3390/gels10040284 - 22 Apr 2024
Abstract
Various controlled delivery systems (CDSs) have been developed to overcome the shortcomings of traditional drug formulations (tablets, capsules, syrups, ointments, etc.). Among innovative CDSs, hydrogels and liposomes have shown great promise for clinical applications thanks to their cost-effectiveness, well-known chemistry and synthetic feasibility,
[...] Read more.
Various controlled delivery systems (CDSs) have been developed to overcome the shortcomings of traditional drug formulations (tablets, capsules, syrups, ointments, etc.). Among innovative CDSs, hydrogels and liposomes have shown great promise for clinical applications thanks to their cost-effectiveness, well-known chemistry and synthetic feasibility, biodegradability, biocompatibility and responsiveness to external stimuli. To date, several liposomal- and hydrogel-based products have been approved to treat cancer, as well as fungal and viral infections, hence the integration of liposomes into hydrogels has attracted increasing attention because of the benefit from both of them into a single platform, resulting in a multifunctional drug formulation, which is essential to develop efficient CDSs. This short review aims to present an updated report on the advancements of liposome–hydrogel systems for drug delivery purposes.
Full article
(This article belongs to the Special Issue Liposomal and Ethosomal Gels: From Design to Application (2nd Edition))
►▼
Show Figures
Figure 1
Open AccessArticle
High Modulus, Strut-like poly(ether ether ketone) Aerogels Produced from a Benign Solvent
by
Glenn A. Spiering, Garrett F. Godshall and Robert B. Moore
Gels 2024, 10(4), 283; https://doi.org/10.3390/gels10040283 - 22 Apr 2024
Abstract
Poly(ether ether ketone) (PEEK) was found to form gels in the benign solvent 1,3-diphenylacetone (DPA). Gelation of PEEK in DPA was found to form an interconnected, strut-like morphology composed of polymer axialites. To our knowledge, this is the first report of a strut-like
[...] Read more.
Poly(ether ether ketone) (PEEK) was found to form gels in the benign solvent 1,3-diphenylacetone (DPA). Gelation of PEEK in DPA was found to form an interconnected, strut-like morphology composed of polymer axialites. To our knowledge, this is the first report of a strut-like morphology for PEEK aerogels. PEEK/DPA gels were prepared by first dissolving PEEK in DPA at 320 °C. Upon cooling to 50 °C, PEEK crystallizes and forms a gel in DPA. The PEEK/DPA phase diagram indicated that phase separation occurs by solid–liquid phase separation, implying that DPA is a good solvent for PEEK. The Flory–Huggins interaction parameter, calculated as χ12 = 0.093 for the PEEK/DPA system, confirmed that DPA is a good solvent for PEEK. PEEK aerogels were prepared by solvent exchanging DPA to water then freeze-drying. PEEK aerogels were found to have densities between 0.09 and 0.25 g/cm3, porosities between 80 and 93%, and surface areas between 200 and 225 m2/g, depending on the initial gel concentration. Using nitrogen adsorption analyses, PEEK aerogels were found to be mesoporous adsorbents, with mesopore sizes of about 8 nm, which formed between stacks of platelike crystalline lamellae. Scanning electron microscopy and X-ray scattering were utilized to elucidate the hierarchical structure of the PEEK aerogels. Morphological analysis found that the PEEK/DPA gels were composed of a highly nucleated network of PEEK axialites (i.e., aggregates of stacked crystalline lamellae). The highly connected axialite network imparted robust mechanical properties on PEEK aerogels, which were found to densify less upon freeze-drying than globular PEEK aerogel counterparts gelled from dichloroacetic acid (DCA) or 4-chlorphenol (4CP). PEEK aerogels formed from DPA were also found to have a modulus–density scaling that was far more efficient in supporting loads than the poorly connected aerogels formed from PEEK/DCA or PEEK/4CP solutions. The strut-like morphology in these new PEEK aerogels also significantly improved the modulus to a degree that is comparable to high-performance crosslinked aerogels based on polyimide and polyurea of comparable densities.
Full article
(This article belongs to the Special Issue Advances in Synthetic and Bio-Based Aerogels: Mechanical Properties, Thermal Insulation, and Environmental Remediation)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Influence of Gelatin and Propolis Extract on Honey Gummy Jelly Properties: Optimization Using D-Optimal Mixture Design
by
Kultida Kaewpetch, Saowapa Yolsuriyan, Terd Disayathanoowat, Patcharin Phokasem, Taruedee Jannu, Gerry Renaldi and Rajnibhas Sukeaw Samakradhamrongthai
Gels 2024, 10(4), 282; https://doi.org/10.3390/gels10040282 - 21 Apr 2024
Abstract
►▼
Show Figures
Gelatin is commonly used as a gelling agent in gummy candy. Honey and bee products are valuable and rich sources of biologically active substances. In this study, the influence of gelatin and propolis extract on honey gummy jelly (HGJ) properties was investigated. Honey
[...] Read more.
Gelatin is commonly used as a gelling agent in gummy candy. Honey and bee products are valuable and rich sources of biologically active substances. In this study, the influence of gelatin and propolis extract on honey gummy jelly (HGJ) properties was investigated. Honey (28–32%), xylitol (13–17%), and gelatin (6–10%) were utilized to develop HGJ products by mixture design methodology. Subsequently, the optimized formulation of HGJ was fortified with 1% and 2% propolis extract to enhance its phytochemicals and antimicrobial activities. The variation in the ingredients significantly affected the physicochemical, textural, and sensory properties of the HGJ. The optimized HGJ formulation consisted of honey (32%), xylitol (14%), and gelatin (7%) and exhibited 13.35 × 103 g.force of hardness, −0.56 × 103 g.sec of adhesiveness, 11.96 × 103 N.mm of gumminess, 0.58 of resilience, and a moderate acceptance score (6.7–7.5). The fortification of HGJ with propolis extract significantly increased its phytochemical properties. Furthermore, the incorporation of propolis extract (2%) into the HGJ was able to significantly inhibit the growth of Gram-positive (Streptococcus mutans and Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria. The mixture of gelatin, xylitol, honey, and propolis extract can be utilized to develop a healthy gummy product with acceptable physicochemical, textural, and sensory qualities.
Full article
Figure 1
Open AccessArticle
Active Fish Gelatin/Chitosan Blend Film Incorporated with Guava Leaf Powder Carbon Dots: Properties, Release and Antioxidant Activity
by
Gokulprasanth Murugan, Krisana Nilsuwan, Thummanoon Prodpran, Arunachalasivamani Ponnusamy, Jong-Whan Rhim, Jun Tae Kim and Soottawat Benjakul
Gels 2024, 10(4), 281; https://doi.org/10.3390/gels10040281 - 21 Apr 2024
Abstract
Active packaging is an innovative approach to prolonge the shelf-life of food products while ensuring their quality and safety. Carbon dots (CDs) from biomass as active fillers for biopolymer films have been introduced to improve their bioactivities as well as properties. Gelatin/chitosan (G/C)
[...] Read more.
Active packaging is an innovative approach to prolonge the shelf-life of food products while ensuring their quality and safety. Carbon dots (CDs) from biomass as active fillers for biopolymer films have been introduced to improve their bioactivities as well as properties. Gelatin/chitosan (G/C) blend films containing active guava leaf powder carbon dots (GL-CDs) at various levels (0–3%, w/w) were prepared by the solvent casting method and characterized. Thickness of the control increased from 0.033 to 0.041 mm when 3% GL-CDs were added (G/C-CD-3%). Young’s modulus of the resulting films increased (485.67–759.00 MPa), whereas the tensile strength (26.92–17.77 MPa) and elongation at break decreased (14.89–5.48%) as the GL-CDs’ level upsurged (p < 0.05). Water vapor barrier property and water contact angle of the film were enhanced when incorporated with GL-CDs (p < 0.05). GL-CDs had a negligible impact on film microstructure, while GL-CDs interacted with gelatin or chitosan, as determined by FTIR. The release of GL-CDs from blend films was more pronounced in water than in alcoholic solutions (10–95% ethanol). The addition of GL-CDs improved the UV light barrier properties and antioxidant activities of the resultant films in a dose-dependent manner. Thus, GL-CD-added gelatin/chitosan blend films with antioxidant activities could be employed as potential active packaging for the food industry.
Full article
(This article belongs to the Special Issue Marine Biopolymers-Based Hydrogels, Xerogels and Aerogels: Preparation and Applications)
►▼
Show Figures
Graphical abstract
Journal Menu
► ▼ Journal Menu-
- Gels Home
- Aims & Scope
- Editorial Board
- Reviewer Board
- Topical Advisory Panel
- Instructions for Authors
- Special Issues
- Topics
- Sections & Collections
- Article Processing Charge
- Indexing & Archiving
- Editor’s Choice Articles
- Most Cited & Viewed
- Journal Statistics
- Journal History
- Journal Awards
- Conferences
- Editorial Office
Journal Browser
► ▼ Journal BrowserHighly Accessed Articles
Latest Books
E-Mail Alert
News
Topics
Conferences
Special Issues
Special Issue in
Gels
Structured Gels: Mechanics, Responsivity and Applications
Guest Editors: Mutian Hua, Shuwang WuDeadline: 30 April 2024
Special Issue in
Gels
Gel for Oil-Based Drilling Fluid
Guest Editor: Jintang WangDeadline: 20 May 2024
Special Issue in
Gels
Physically Cross-Linked Gels and Their Applications
Guest Editors: Regina R. Vildanova, Sergey V. Kolesov, Vitaliy V. KhutoryanskiyDeadline: 30 May 2024
Special Issue in
Gels
Dynamics of Polymeric Gels
Guest Editors: Shensheng Chen, Domenico LarobinaDeadline: 20 June 2024
Topical Collections
Topical Collection in
Gels
Recent Advances and Future Perspectives in Stimuli-Responsive Gels
Collection Editors: Dirk Kuckling, Sandra Van Vlierberghe
Topical Collection in
Gels
Recent Advances and Future Perspectives in Organogels and Organogelators Research
Collection Editor: Jean-Michel Guenet
Topical Collection in
Gels
Hydrogel in Tissue Engineering and Regenerative Medicine
Collection Editor: Esmaiel Jabbari