ALBERT

Description: Virtualization is commonly accepted as the catalyst that would grant the internet the ability to shed the shackles of legacy technologies and evolve to its future self. In order to make this transformation feasible, unavoidable concurrent radical remodeling of all the involved counterparts is required, particularly in the context of automatically and optimally serving application requests by taking advantage of new virtualized environments and their latent capabilities. A considerable number of embedding strategies that efficiently map virtual computational and networking demands over physical resources have already been proposed in the literature, following different strategies. Among these suggested strategies, different coordination proposals have been adopted, in order to solve the node and link mapping functions. In this paper, we study the capabilities of the most popular embedding strategies, based on their coordination categorization. Our study confirms that by invoking a coordination strategy, especially the single stage one, added benefits on multiple performance layers can be achieved. Moreover, we propose a new mixed coordination algorithm, essentially creating a new category in the field of VNE coordination strategies.

Description: The exigency for continuous use of electrical devices has created greater demands for electricity along with more efficient transmission techniques. Energy from natural resources can be solar, thermal, vibration, friction, or Radio Frequencies (RF) signals. This state-of-the-art work provides a summary of RF energy harvesting techniques and can be used as a guide for the manufacture of RF energy scavenging modules. The use of Radio Frequency (RF) Energy Harvesting (EH) technique contributes to the development of autonomous energy devices and sensors. A rectenna system includes three main units: the receiving antenna, the impedance matching network, and the rectifier. We thoroughly analyze how to design a rectenna system with special emphasis given on the design of the rectifier. At the same time many works of the last 10 years are presented. This review article categorizes the used topologies depending on the type of antennas, IMNs, and rectifiers and comparatively presents their advantages and disadvantages.

Description: Radio frequency interference (RFI) constitutes a significant problem in achieving a good quality of service in radio links. Several techniques have been proposed to identify and mitigate RFI in wireless networks. However, most of these techniques are not generalized for all propagation environments due to varying geographical features from one environment to another. The need for extensive frequency scan measurements on the links to identify the available channels, evaluate the performances of the links, and detect RFI in the channels becomes imperative. This study presents a performance evaluation of frequency scan measurements from active microwave links comprising eighteen base stations. The measurements equipment included a spectrum analyzer and a 0.6 m antenna dish. The frequency scans were taken at 6 GHz, 7 GHz, and 8 GHz with full azimuth coverage of the horizontal and vertical polarization. Measured data were processed to determine the available frequencies and RFI in the channels. The histogram and probability density function of the frequency scans were computed. The cumulative distribution functions were determined, and the statistical error characteristics of the frequency scans for the estimated normal distribution and the estimated fitness curve were derived. The short-time Fourier transform of the noisy signal was obtained, and the signal without noise was recovered using the inverse short-time Fourier transform. Analysis of the scanned signals before and after the noise removal is demonstrated. The denoised signals compare favorably with related results in the preliminary literature. Overall, these frequency scans would be beneficial in evaluating RFI measurements and spectrum planning and hold great promise for designing robust RFI detection algorithms for future wireless systems.

Description: This paper describes the development and evaluation of an on-body flexible antenna designed for an in-body application, as well as on-body communications at ISM and UWB frequency bands. The evaluation is performed via electromagnetic simulations using the Dassault Simulia CST Studio Suite. A planar tissue layer model, as well as a human voxel model from the human abdominal area, are used to study the antenna characteristics next to human tissues. Power flow analysis is presented to understand the power flow on the body surface as well as within the tissues. Simulation results show that this wearable flexible antenna is suitable for in-body communications in the intestinal area, e.g., for capsule endoscopy, in the industrial, scientific, and medical (ISM) band and at lower ultra-wideband (UWB). At higher frequencies, the antenna is suitable for on-body communications as well as in-body communications with lower propagation depth requirements. Additionally, an antenna prototype has been prepared and the antenna performance is verified with several on-body measurements. The measurement results show a good match with the simulation results. The novelty of the proposed antenna is a compact size and the flexible substrate material, which makes it feasible and practical for several different medical diagnosis and monitoring applications.

Description: Radio Frequency (RF) energy harvesting has been emerged as a potentially reliable method to replace the costly and difficult to maintain source of low-power wireless sensor networks. A plethora of dual-band rectifier designs has been proposed in the literature operating in various frequency bands. In this paper, a triple-band RF-to-DC rectifier that operates in the frequency bands of LoRaWAN, GSM-900, and WiFi 2.4 GHz is presented. The system is composed of an impedance-matching circuit, an RF-to-DC rectifier, that converts the ambient RF energy into DC voltage able to feed low-power devices, and an output load. The proposed system resonates at three different frequencies of 866 MHz, 948 MHz and 2423 MHz, which fall within the aforementioned frequency bands of interest. The feasible solution of the proposed system was based on a dual-band rectifier operating in the frequency bands of LoRaWAN and GSM-900. A series of shunt stubs was utilized in the initial design to form the feasible solution of the proposed system. The proposed triple-band rectifier was optimized using a powerful optimization algorithm, i.e., the genetic algorithm. The overall system exhibited improved characteristics compared to the initial design in terms of its resonance. Numerical results demonstrated that the overall system exhibited an efficiency of 81% with 3.23 V of the output voltage, for an input power of 0 dBm and a load of 13 kOhm.

Description: In recent years, propagation channel characteristics have been effectively used in several applications such as motion sensing and position detection. Considerable attention has been paid to channel-sounding methods that are easy to utilize using low-cost devices. This paper presents a device-free indoor location estimation method using the spatio-temporal features of radio propagation channels using a 2.4 GHz-band three-by-three multiple-input-multiple-output (MIMO) channel sounder developed using commodity wireless local area network (WLAN). The measurement results demonstrated a reasonable performance of the proposed method with a small number of antennas.

Description: Recent developments in both optical wireless communication (OWC) systems and implanted medical devices (IMDs) have introduced transdermal optical wireless (TOW) technology as a viable candidate for extremely high-speed in-body to out-of-body wireless data transmissions, which are growing in demand for many vital biomedical applications, including telemetry with medical implants, health monitoring, neural recording and prostheses. Nevertheless, this emerging communication modality is primarily hindered by skin-induced attenuation of the propagating signal bit carrier along with its stochastic misalignment-induced fading. Thus, by considering a typical modulated retroreflective (MRR) TOW system with spatial diversity and optimal combining (OC) for signal reception in this work, we focus, for the first time in the MRR TOW literature, on the stochastic nature of generalized pointing errors with non-zero boresight (NZB). Specifically, under these circumstances, novel analytical mathematical expressions were derived for the total average bit error rate (BER) of various system configurations. Their results revealed significant outage performance enhancements when spatial diversity was utilized. Moreover, taking into consideration the total transdermal pathloss along with the effects of stochastic NZB pointing errors, the critical average signal-to-noise ratio (SNR) metric was evaluated for typical power spectral-density values.

Description: Traditional education, particularly at a university level is not necessarily very engaging. Educational escape rooms are a recent game based learning approach which combines team based problem solving with a story-line and cryptic clues. In this paper, we apply the concept of educational escape rooms to the telecommunications engineering classroom by creating a series of two separate scenarios, each containing three puzzles. Our evaluation is based on survey results from telecommunication experts which suggest that this will be an engaging and challenging tool for teaching telecommunications engineering. Although educational escape rooms are rapidly being deployed in education, these are the first educational escape rooms that specifically addresses the field of telecommunications engineering.

Description: Heterogeneous Vehicular Network (HetVNET) is a highly dynamic type of network that changes very quickly. Regarding this feature of HetVNETs and the emerging notion of network slicing in 5G technology, we propose a hybrid intelligent Software-Defined Network (SDN) and Network Functions Virtualization (NFV) based architecture. In this paper, we apply Conditional Generative Adversarial Network (CGAN) to augment the information of successful network scenarios that are related to network congestion and dynamicity. The results show that the proposed CGAN can be trained in order to generate valuable data. The generated data are similar to the real data and they can be used in blueprints of HetVNET slices.

Description: It had been predicted that by 2020, nearly 26 billion devices would be connected to the Internet, with a big percentage being vehicles. The Internet of Vehicles (IoVa) is a concept that refers to the connection and cooperation of smart vehicles and devices in a network through the generation, transmission, and processing of data that aims at improving traffic congestion, travel time, and comfort, all the while reducing pollution and accidents. However, this transmission of sensitive data (e.g., location) needs to occur with defined security properties to safeguard vehicles and their drivers since attackers could use this data. Blockchain is a fairly recent technology that guarantees trust between nodes through cryptography mechanisms and consensus protocols in distributed, untrustful environments, like IoV networks. Much research has been done in implementing the former in the latter to impressive results, as Blockchain can cover and offer solutions to many IoV problems. However, these implementations have to deal with the challenge of IoV node’s resource constraints since they do not suffice for the computational and energy requirements of traditional Blockchain systems, which is one of the biggest limitations of Blockchain implementations in IoV. Finally, these two technologies can be used to build the foundations for smart cities, enabling new application models and better results for end-users.