ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

feed icon rss

Ihre E-Mail wurde erfolgreich gesendet. Bitte prüfen Sie Ihren Maileingang.

Leider ist ein Fehler beim E-Mail-Versand aufgetreten. Bitte versuchen Sie es erneut.

Vorgang fortführen?

Exportieren
  • 1
    Publikationsdatum: 2022-02-11
    Beschreibung: Abstract
    Beschreibung: Here we report the raw data of the friction experiments carried out on basalt-built simulated faults defined by rock-on-rock contacts and powdered gouge. The experiments were specifically designed to investigate the role of fault microstructure on the frictional properties of basalts and the fault slip stability, and were conducted with the rotary-shear apparatus (SHIVA) and the biaxial deformation apparatus (BRAVA), hosted at the National Institute of Geophysics and Volcanology (INGV) in Rome. Simulated faults were sheared at constant normal stress from 4 to 30 MPa. In SHIVA experiments, we deformed samples at constant slip velocity of 10 μm/s up to 56 mm net slip. In BRAVA tests we performed a sequence of velocity steps (0.1 to 300 μm/s), followed by slide-hold-slide tests (30-3000 s holds; V=10 μm/s slides). Our main results highlight the frictionally strong nature of basalt faults and show opposite friction velocity dependence upon the velocity upsteps: while fault gouges exhibit velocity weakening behavior with increasing normal stress and sliding velocity, bare rock surfaces transition to velocity strengthening behavior as we approach higher slip velocities. The experiments setup and data are further described in the manuscript “Frictional properties of basalt experimental faults and implications for volcano-tectonic settings and geo-energy sites” to which these data are supplementary material.
    Schlagwort(e): Fault mechanics ; Friction of basalts ; Rate and State Friction ; Bare rock surfaces ; Simulated fault gouge ; EPOS ; multi-scale laboratories ; rock and melt physical properties ; alkali-olivine_basalt ; Biaxial ; Friction ; Rotary Shear ; Strain gauge
    Materialart: Dataset , Dataset
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 2
    Publikationsdatum: 2021-05-12
    Beschreibung: Tectonic faults typically break in a single rupture mode within the range of styles from slow slip to dynamic earthquake failure. However, in increasingly well‐documented instances, the same fault segment fails in both slow and fast modes within a short period, as in the sequences that culminated in the 2011 Mw = 9.0 Tohoku‐Oki, Japan, and 2014 Mw = 8.2 Iquique, Chile, earthquakes. Why slow slip alternates with dynamic rupture in certain regions but not in others is not well understood. Here, we integrate laboratory experiments and numerical simulations to investigate the physical conditions leading to cycles where the two rupture styles alternate. We show that a bifurcation takes place near the stability transition with sequences encompassing various rupture modes under constant loading rate. The range of frictional instabilities and slip cycles identified in this study represents important end‐members to understand the interaction of slow and fast slip on the same fault segment.
    Beschreibung: Published
    Beschreibung: e2020GL087985
    Beschreibung: 3T. Sorgente sismica
    Beschreibung: JCR Journal
    Schlagwort(e): Earthquake ; Friction ; Earthquake physics
    Repository-Name: Istituto Nazionale di Geofisica e Vulcanologia (INGV)
    Materialart: article
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 3
    Publikationsdatum: 2021-05-12
    Beschreibung: Understanding the physical mechanisms at the origin of slow‐slip events has been proven a very challenging task. In particular, little is known on the role of fault heterogeneity during slow slip. In this study, we provide evidences that fault fabric controls slip velocity time histories during slow‐slip events generated in the laboratory. We performed experiments using a double‐direct biaxial shear apparatus and two different fault gouges, homogeneous quartz powder, and heterogeneous anhydrite/dolomite mixture. We measure details of fault slip to resolve the slip velocity function and volumetric deformation that, coupled with an analysis of the resulting microstructure, allow us to infer the mechanical processes at play. Our results show that slow‐slip events can be generated for both fault gouges when k ~ kc with similar values of breakdown work. The shear fabric exerts a strong influence during the coseismic breakdown stage. In quartz, where most of the slip occurs on a very localized slipping surface, the peak slip velocity is attained near the final stage of friction breakdown and therefore a relevant amount of the mechanical work is absorbed during slip acceleration. In anhydrite/dolomite mixture, the peak slip velocity is suddenly reached after a relatively small drop in friction, accompanied by fault dilation, implying that most of the mechanical work is absorbed during slip deceleration. For anhydrite/dolomite mixture these results are likely related to heterogeneous slip distribution along the observed foliation. Taken together, these observations suggest that the mechanics of slow‐slip events depends on shear zone fabric.
    Beschreibung: Sapienza Grant Ateneo 2018 to C. C. and Horizon 2020 innovation program under the Marie Sklodowska‐Curie 656676 FEAT to M. M. S.
    Beschreibung: Published
    Beschreibung: e2020JB020405
    Beschreibung: 1T. Struttura della Terra
    Beschreibung: JCR Journal
    Schlagwort(e): Earthquake ; Friction ; Earthquake physics
    Repository-Name: Istituto Nazionale di Geofisica e Vulcanologia (INGV)
    Materialart: article
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 4
    Publikationsdatum: 2021-05-12
    Beschreibung: On natural faults that host repeating slip events, the inter‐event loading time is quite large compared to the slip event duration. Since most friction studies focus on steady‐state frictional behavior, the fault loading phase is not typically examined. Here, we employ a method specifically designed to evaluate fault strength evolution during active loading, under shear driving rates as low as 10−10 m/s, on natural fault gouge samples from the Waikukupa Thrust in southern New Zealand. These tests reveal that in the early stages of loading following a slip event, there is a period of increased stability, which fades with accumulated slip. In the framework of rate‐ and state‐dependent friction laws, this temporary stable phase exists as long as slip is less than the critical slip distance and the elapsed time is less than the value of the state variable at steady state. These observations indicate a minimum earthquake recurrence time, which depends on the field value of the critical slip distance and the background slip rate. We compare estimates of minimum earthquake recurrence times with the recurrence times of repeating large earthquakes on the Alpine Fault in southern New Zealand and repeating small‐magnitude earthquakes on the San Andreas Fault system in California. We find that the observed recurrence times are mostly longer than the predicted minimum values, and exceptions in the San Andreas system may be explained by elevated slip rates due to larger earthquakes in this region.
    Beschreibung: Deutsche Forschungsgemeinschaft via MARUM Research Centre/Cluster of Excellence (grants FZT15, EXC309, and IK 107/3‐1) and from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement 714430) to M. I.
    Beschreibung: Published
    Beschreibung: e2020JB020015
    Beschreibung: 1T. Struttura della Terra
    Beschreibung: JCR Journal
    Schlagwort(e): Friction ; Fault ; Earthquake physics
    Repository-Name: Istituto Nazionale di Geofisica e Vulcanologia (INGV)
    Materialart: article
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
Schließen ⊗
Diese Webseite nutzt Cookies und das Analyse-Tool Matomo. Weitere Informationen finden Sie hier...