ALBERT

Description: Alkene cleavage is a possibility to generate aldehydes with olfactory properties for the fragrance and flavor industry. A dye-decolorizing peroxidase (DyP) of the basidiomycete Pleurotus sapidus (PsaPOX) cleaved the aryl alkene trans-anethole. The PsaPOX was semi-purified from the mycelium via FPLC, and the corresponding gene was identified. The amino acid sequence as well as the predicted tertiary structure showed typical characteristics of DyPs as well as a non-canonical Mn2+-oxidation site on its surface. The gene was expressed in Komagataella pfaffii GS115 yielding activities up to 142 U/L using 2,2′-azino-bis(3-ethylbenzthiazoline-6-sulphonic acid) as substrate. PsaPOX exhibited optima at pH 3.5 and 40 °C and showed highest peroxidase activity in the presence of 100 µM H2O2 and 25 mM Mn2+. PsaPOX lacked the typical activity of DyPs towards anthraquinone dyes, but oxidized Mn2+ to Mn3+. In addition, bleaching of β-carotene and annatto was observed. Biotransformation experiments verified the alkene cleavage activity towards the aryl alkenes (E)-methyl isoeugenol, α-methylstyrene, and trans-anethole, which was increased almost twofold in the presence of Mn2+. The resultant aldehydes are olfactants used in the fragrance and flavor industry. PsaPOX is the first described DyP with alkene cleavage activity towards aryl alkenes and showed potential as biocatalyst for flavor production.

Description: The native extractable arabinoxylans (AX) from wheat bran were cross-linked by the commercial laccase C (LccC) and self-produced laccases from Funalia trogii (LccFtr) and Pleurotus pulmonarius (LccPpu) (0.04 U/µg FA, each). Dynamic oscillation measurements of the 6% AX gels demonstrated a storage modulus of 9.4 kPa for LccC, 9.8 kPa for LccFtr, and 10.0 kPa for LccPpu. A loss factor ≤ 0.6 was recorded in the range from 20 to 80 Hz for all three laccases, and remained constant for four weeks of storage, when LccFtr and LccPpu were used. Arabinoxylan gel characteristics, including high water holding capacity, swelling ratio in saliva, and heat resistance indicated a covalently cross-linked network. Neither the mediator compounds caffeic acid and 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid (ABTS), nor citrus pectin, enhanced the elastic properties of the gels. Using laccases as an oxidant provided gels with a solid and stable texture, comparable in firmness to traditional gelatin gels. Thus, AX gels can be presented in the vegan, halal, and kosher food markets. They may also find use in pharmaceutical and other industrial applications.

Description: Sugar beet fibre (fibrex) is an abundant side-stream from the sugar refining industry. A self-produced laccase from Funalia trogii (LccFtr) (0.05 U/µg FA) successfully cross-linked fibrex to an edible gel. Dynamic oscillation measurements of the 10% fibrex gels showed a storage modulus of 5.52 kPa and loss factors ≤ 0.36 in the range from 20 to 80 Hz. Comparing storage stability of sweetened 10% fibrex gels with sweetened commercial 6% gelatin gels (10% and 30% d-sucrose) indicated a constant storage modulus and loss factors ≤ 0.7 during four weeks of storage in fibrex gels. Loss factors of sweetened gelatin gels were ≤0.2, and their storage modulus decreased from 9 to 7 kPa after adding d-sucrose and remained steady for four weeks of storage. Fibrex gel characteristics, including high water holding capacity, swelling ratio in saliva, and heat resistance are attributed to a covalently cross-linked network. Vanillin, as a mediator, and citrus pectin did not enhance covalent cross-links and elastic properties of the fibrex gels. Thus, laccase as an oxidative agent provided gels with a solid and stable texture. Fibrex gels may find uses in pharmaceutical and other industrial applications, which require a heat-resistant gel that forms easily at room temperature. They also represent an ethical alternative for manufacturing vegan, halal, and kosher food.

Description: Security applications such as management of natural disasters and man-made incidents crucially depend on the rapid availability of a situation picture of the affected area. UAV-based remote sensing systems may constitute an essential tool for capturing aerial imagery in such scenarios. While several commercial UAV solutions already provide acquisition of high quality photos or real-time video transmission via radio link, generating instant high-resolution aerial maps is still an open challenge. For this purpose, the article presents a real-time processing tool chain, enabling generation of interactive aerial maps during flight. Key element of this tool chain is the combination of the Terrain Aware Image Clipping (TAC) algorithm and 12-bit JPEG compression. As a result, the data size of a common scenery can be reduced to approximately 0.4% of the original size, while preserving full geometric and radiometric resolution. Particular attention was paid to minimize computational costs to reduce hardware requirements. The full workflow was demonstrated using the DLR Modular Airborne Camera System (MACS) operated on a conventional aircraft. In combination with a commercial radio link, the latency between image acquisition and visualization in the ground station was about 2 s. In addition, the integration of a miniaturized version of the camera system into a small fixed-wing UAV is presented. It is shown that the described workflow is efficient enough to instantly generate image maps even on small UAV hardware. Using a radio link, these maps can be broadcasted to on-site operation centers and are immediately available to the end-users.

Description: Arginyl dipeptides like Arg-Ser, Arg-Ala, and Arg-Gly are salt-taste enhancers and can potentially be used to reduce the salt content of food. The l-amino acid ligase RizA from B. subtilis selectively synthesizes arginyl dipeptides. However, industrial application is prevented by the high cost of the cofactor adenosine triphosphate (ATP). Thus, a coupled reaction system was created consisting of RizA and acetate kinase (AckA) from E. coli providing ATP regeneration from acetyl phosphate. Both enzymes were recombinantly produced in E. coli and purified by affinity chromatography. Biocatalytic reactions were varied and analyzed by RP-HPLC with fluorescence detection. Under optimal conditions the system produced up to 5.9 g/L Arg-Ser corresponding to an ATP efficiency of 23 g Arg-Ser per gram ATP. Using similar conditions with alanine or glycine as second amino acid, 2.6 g/L Arg-Ala or 2.4 g/L Arg Gly were produced. The RizA/AckA system selectively produced substantial amounts of arginyl dipeptides while minimizing the usage of the expensive ATP.