ISSN:
0003-3146
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Chemistry and Pharmacology
,
Physics
Description / Table of Contents:
Zur Verbesserung der Maßhaltigkeit und der Zähigkeit von gehärteten Melamin-Formaldehyd-Harz-Formmassen (MF) wurden teilverträgliche, methylolgruppenhaltige Epoxidharze (EP) auf Bisphenol A-Basis hergestellt und charakterisiert. Die Vernetzung solcher Epoxyresolharze durch 2-Ethyl-4-methylimidazol in Gegenwart von MF-Harz wurde untersucht. Spritzgepreßte Probekörper zeigen eine Zweiphasenstruktur; die EP-Phase kann als Wirt für carboxy-funktionalisierte, oligomere NBR-Kautschuke (CTBNX) dienen, die für sich allein in MF-Harzen nicht wirksam sind. Unter der Voraussetzung von kovalenten Bindungen in der Phasengrenzfläche kann durch den Zusatz von 0,5 bis 4 Gew.-% CTBNX zur MF-Formmasse bei EP-Anteilen bis 20 Gew.-% eine 50 bis 100proz. Steigerung von Bruchdehnung und Schlagzähigkeit erreicht werden, ohne daß Steifigkeit und Wärmeformbeständigkeit wesentlich abfallen. Bei moderaten EP/CTBNX-Gehalten wird zusätzlich die Nachschwindung von MF-Formteilen vermindert.
Notes:
In order to improve dimension stability and toughness of melamine formaldehyde moulding materials (MF), compatible bisphenol A epoxy resins (EP) with additional methylol groups were synthesized and characterized. Crosslinking of those epoxyresol resins with 2-ethyl-4-methylimidazole in the presence of MF resin was investigated. Transfer-moulded specimens revealed a two-phase morphology in which the EP phase is used as a host for modification with carboxylic functionalized oligomeric NBR rubber (CTBNX), which is not effective in MF moulding materials alone. The addition of 0.5 - 4 wt.-% CTBNX to the MF moulding materials at an epoxy content of maximum 20 wt.-% results in 50-100 % increase of elasticity and toughness without serious decrease in stiffness and heat deflection temperature, provided that covalent interfacial bonds exist. In addition, the post-shrinkage of MF parts decreases if a moderate EP/CTBNX content is introduced.
Additional Material:
26 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/apmc.1996.052370101
Permalink