ALBERT

Description: At the surface, strike-slip fault stepovers, including abrupt fault bends, are typically regions of complex, often disconnected faults. This complexity has traditionally led geologists studying the hazard of active faults to consider such stepovers as important fault segment boundaries, and to give lower weight to earthquake scenarios that involve rupture through the stepover zone. However, recent geological and geophysical studies of several stepover zones along the San Andreas fault system in California have revealed that the complex nature of the fault zone at the surface masks a much simpler and direct connection at depths associated with large earthquakes (greater than 5 km). In turn, the simplicity of the connection suggests that a stepover zone would provide less of an impediment to through-going rupture in a large earthquake, so that the role of stepovers as segment boundaries has probably been overemphasized. However, counter-examples of fault complexity at depth associated with surface stepovers are known, so the role of stepovers in fault rupture behaviour must be carefully established in each case.

Description: Interpretation of magnetic and new gravity data provides constraints on the geometry of the Hat Creek fault, the amount of right-lateral offset in the area between Mount Shasta and Lassen Peak (northern California, USA), and confirmation of the influence of preexisting structure on Quaternary faulting. Neogene volcanic rocks coincide with short-wavelength magnetic anomalies of both normal and reversed polarity, whereas a markedly smoother magnetic field occurs over the Klamath Mountains and Paleogene cover there. Although the magnetic field over the Neogene volcanic rocks is complex, the Hat Creek fault, which is one of the most prominent normal faults in the region and forms the eastern margin of the Hat Creek Valley, is marked by the eastern edge of a north-trending magnetic and gravity high 20–30 km long. Modeling of these anomalies indicates that the fault is a steeply dipping (~75°–85°) structure. The spatial relationship of the fault as modeled by the potential-field data, the youngest strand of the fault, and relocated seismicity suggest that deformation continues to step westward across the valley, consistent with a component of right-lateral slip in an extensional environment. Filtered aeromagnetic data highlight a concealed magnetic body of Mesozoic or older age north of Hat Creek Valley. The body’s northwest margin strikes northeast and is linear over a distance of ~40 km. Within the resolution of the aeromagnetic data (1–2 km), we discern no right-lateral offset of this body. Furthermore, Quaternary faults change strike or appear to end, as if to avoid this concealed magnetic body and to pass along its southeast edge, suggesting that preexisting crustal structure influenced younger faulting, as previously proposed based on gravity data.

Description: The late Cenozoic stratigraphic and tectonic history of the Santa Clara Valley illustrates the dynamic nature of the North American–Pacific plate boundary and its effect on basin and landscape development. Prior to early Miocene time, the area that became Santa Clara Valley consisted of eroding Franciscan complex basement structurally interleaved in places with Coast Range ophiolite and Mesozoic Great Valley sequence, and locally overlapped by Paleogene strata. During early to middle Miocene time, this landscape was flooded by the sea and was deformed locally into deeper depressions such as the Cupertino Basin in the southwestern part of the valley. Marine deposition during the middle and late Miocene laid down thin deposits in shallow water and thick deeper-water deposits in the Cupertino Basin. During this sedimentation, the San Andreas fault system encroached into the valley, with most offset partitioned onto the San Andreas fault southwest of the valley and the southern Calaveras–Silver Creek–Hayward fault system in the northeastern part of the valley. A 6-km-wide right step between the Hayward and Silver Creek faults formed the 40-km-long Evergreen pull-apart basin along the northeastern margin of the valley, leaving a basement ridge between it and the Cupertino Basin. The Silver Creek fault was largely abandoned ca. 2.5 Ma in favor of a compressional left step between the Calaveras and Hayward fault, although some slip continued to at least mid-Quaternary time. Gravity, seismic, stratigraphic, and interferometric synthetic aperture radar (InSAR) data indicate no other major San Andreas system faults within the central block between the present-day range-front faults bounding the valley and the Silver Creek fault. Sometime between 9 and 4 Ma (9 and 1 Ma for the central block), the area rose above sea level, and a regional surface of erosion was carved into the Mesozoic and Tertiary rocks. Alluvial gravels were deposited on this surface along the margins of the valley beginning ca. 4 Ma, but they may not have prograded onto the central block until ca. 1 Ma, because no older equivalents of the Pliocene–Quaternary Santa Clara gravels have been found there. Thus, either the central block was high enough relative to the surrounding areas that Santa Clara gravels were never deposited on it, or any Santa Clara gravels deposited there were stripped away before ca. 1 Ma. Analysis of alluvium on the central block implies a remarkably uniform, piston-like, subsidence of the valley of ~0.4 mm/yr since ca. 0.8 Ma, possibly extending north to northern San Francisco Bay. Today, the central block continues to subside, the range-front reverse faults are active, and the major active faults of the San Andreas system are mostly outside the valley.

Description: Santa Clara Valley is bounded on the southwest and northeast by active strike-slip and reverse-oblique faults of the San Andreas fault system. On both sides of the valley, these faults are superposed on older normal and/or right-lateral normal oblique faults. The older faults comprised early components of the San Andreas fault system as it formed in the wake of the northward passage of the Mendocino Triple Junction. On the east side of the valley, the great majority of fault displacement was accommodated by the older faults, which were almost entirely abandoned when the presently active faults became active after ca. 2.5 Ma. On the west side of the valley, the older faults were abandoned earlier, before ca. 8 Ma and probably accumulated only a small amount, if any, of the total right-lateral offset accommodated by the fault zone as a whole. Apparent contradictions in observations of fault offset and the relation of the gravity field to the distribution of dense rocks at the surface are explained by recognition of superposed structures in the Santa Clara Valley region.

Description: Estimates of the dip, depth extent, and amount of cumulative displacement along the major faults in the central California Coast Ranges are controversial. We use detailed aeromagnetic data to estimate these parameters for the San Gregorio–San Simeon–Hosgri and other faults. The recently acquired aeromagnetic data provide an areally consistent data set that crosses the onshore-offshore transition without disruption, which is particularly important for the mostly offshore San Gregorio–San Simeon–Hosgri fault. Our modeling, constrained by exposed geology and in some cases, drill-hole and seismic-reflection data, indicates that the San Gregorio–San Simeon–Hosgri and Reliz-Rinconada faults dip steeply throughout the seismogenic crust. Deviations from steep dips may result from local fault interactions, transfer of slip between faults, or overprinting by transpression since the late Miocene. Given that such faults are consistent with predominantly strike-slip displacement, we correlate geophysical anomalies offset by these faults to estimate cumulative displacements. We find a northward increase in right-lateral displacement along the San Gregorio–San Simeon–Hosgri fault that is mimicked by Quaternary slip rates. Although overall slip rates have decreased over the lifetime of the fault, the pattern of slip has not changed. Northward increase in right-lateral displacement is balanced in part by slip added by faults, such as the Reliz-Rinconada, Oceanic–West Huasna, and (speculatively) Santa Ynez River faults to the east.

Description: Magnetic anomalies provide surprising structural detail within the previously undivided Coastal Belt, the westernmost, youngest, and least-metamorphosed part of the Franciscan Complex of northern California. Although the Coastal Belt consists almost entirely of arkosic graywacke and shale of mainly Eocene age, new detailed aeromagnetic data show that it is pervasively marked by long, narrow, and regularly spaced anomalies. These anomalies arise from relatively simple tabular bodies composed principally of magnetic basalt or graywacke confined mainly to the top couple of kilometers, even though metamorphic grade indicates that these rocks have been more deeply buried, at depths of 5–8 km. If true, this implies surprisingly uniform uplift of these rocks. The basalt (and associated Cretaceous limestone) occurs largely in the northern part of the Coastal Belt; the graywacke is recognized only in the southern Coastal Belt and is magnetic because it contains andesitic grains. The magnetic grains were not derived from the basalt, and thus require a separate source. The anomalies define simple patterns that can be related to folding and faulting within the Coastal Belt. This apparent simplicity belies complex structure mapped at outcrop scale, which can be explained if the relatively simple tabular bodies are internally deformed, fault-bounded slabs. One mechanism that can explain the widespread lateral extent of the thin layers of basalt is peeling up of the uppermost part of the oceanic crust into the accretionary prism, controlled by porosity and permeability contrasts caused by alteration in the upper part of the subducting slab. It is not clear, however, how this mechanism might generate fault-bounded layers containing magnetic graywacke. We propose that structural domains defined by anomaly trend, wavelength, and source reflect imbrication and folding during the accretion process and local plate interactions as the Mendocino triple junction migrated north, a hypothesis that should be tested by more detailed structural studies.

Description: The Evergreen basin is a 40-km-long, 8-km-wide Cenozoic sedimentary basin that lies mostly concealed beneath the northeastern margin of the Santa Clara Valley near the south end of San Francisco Bay (California, USA). The basin is bounded on the northeast by the strike-slip Hayward fault and an approximately parallel subsurface fault that is structurally overlain by a set of west-verging reverse-oblique faults which form the present-day southeastward extension of the Hayward fault. It is bounded on the southwest by the Silver Creek fault, a largely dormant or abandoned fault that splays from the active southern Calaveras fault. We propose that the Evergreen basin formed as a strike-slip pull-apart basin in the right step from the Silver Creek fault to the Hayward fault during a time when the Silver Creek fault served as a segment of the main route by which slip was transferred from the central California San Andreas fault to the Hayward and other East Bay faults. The dimensions and shape of the Evergreen basin, together with palinspastic reconstructions of geologic and geophysical features surrounding it, suggest that during its lifetime, the Silver Creek fault transferred a significant portion of the ~100 km of total offset accommodated by the Hayward fault, and of the 175 km of total San Andreas system offset thought to have been accommodated by the entire East Bay fault system. As shown previously, at ca. 1.5–2.5 Ma the Hayward-Calaveras connection changed from a right-step, releasing regime to a left-step, restraining regime, with the consequent effective abandonment of the Silver Creek fault. This reorganization was, perhaps, preceded by development of the previously proposed basin-bisecting Mount Misery fault, a fault that directly linked the southern end of the Hayward fault with the southern Calaveras fault during extinction of pull-apart activity. Historic seismicity indicates that slip below a depth of 5 km is mostly transferred from the Calaveras fault to the Hayward fault across the Mission seismic trend northeast of the Evergreen basin, whereas slip above a depth of 5 km is transferred through a complex zone of oblique-reverse faults along and over the northeast basin margin. However, a prominent groundwater flow barrier and related land-subsidence discontinuity coincident with the concealed Silver Creek fault, a discontinuity in the pattern of seismicity on the Calaveras fault at the Silver Creek fault intersection, and a structural sag indicative of a negative flower structure in Quaternary sediments along the southwest basin margin indicate that the Silver Creek fault has had minor ongoing slip over the past few hundred thousand years. Two earthquakes with ~M6 occurred in A.D. 1903 in the vicinity of the Silver Creek fault, but the available information is not sufficient to reliably identify them as Silver Creek fault events.