ALBERT

Description: Composite silicon dioxide-titanium dioxide (SiO2-TiO2) films are deposited on a large area of 15.6 × 15.6 cm2 textured multicrystalline silicon solar cells to increase the incident light trapped within the device. For further improvement of the antireflective coatings (ARCs) quality, dimethylformamide (DMF) solution is added to the original SiO2-TiO2 solutions. DMF solution solves the cracking problem, thus effectively decreasing reflectance as well as surface recombination. The ARCs prepared by sol-gel process and plasma-enhanced chemical vapor deposition (PECVD) on multicrystalline silicon substrate are compared. The average efficiency of the devices with improved sol-gel ARCs is 16.3%, only 0.5% lower than that of devices with PECVD ARCs (16.8%). However, from equipment depreciation point of view (the expiration date of equipment is generally considered as 5 years), the running cost (USD/watt) of sol-gel technique is 80% lower than that of PECVD method for the first five years and 66% lower than that of PECVD method from the start of the sixth year. This result proves that sol-gel-deposited ARCs process has potential applications in manufacturing low-cost, large-area solar cells.

Description: PM2.5 pollution has become of increasing public concern because of its relative importance and sensitivity to population health risks. Accurate predictions of PM2.5 pollution and population exposure risks are crucial to developing effective air pollution control strategies. We simulated and predicted the temporal and spatial changes of PM2.5 concentration and population exposure risks, by coupling optimization algorithms of the Back Propagation-Artificial Neural Network (BP-ANN) model and a geographical information system (GIS) in Xi’an, China, for 2013, 2020, and 2025. Results indicated that PM2.5 concentration was positively correlated with GDP, SO2, and NO2, while it was negatively correlated with population density, average temperature, precipitation, and wind speed. Principal component analysis of the PM2.5 concentration and its influencing factors’ variables extracted four components that accounted for 86.39% of the total variance. Correlation coefficients of the Levenberg-Marquardt (trainlm) and elastic (trainrp) algorithms were more than 0.8, the index of agreement (IA) ranged from 0.541 to 0.863 and from 0.502 to 0.803 by trainrp and trainlm algorithms, respectively; mean bias error (MBE) and Root Mean Square Error (RMSE) indicated that the predicted values were very close to the observed values, and the accuracy of trainlm algorithm was better than the trainrp. Compared to 2013, temporal and spatial variation of PM2.5 concentration and risk of population exposure to pollution decreased in 2020 and 2025. The high-risk areas of population exposure to PM2.5 were mainly distributed in the northern region, where there is downtown traffic, abundant commercial activity, and more exhaust emissions. A moderate risk zone was located in the southern region associated with some industrial pollution sources, and there were mainly low-risk areas in the western and eastern regions, which are predominantly residential and educational areas.

Description: Subwavelength structural color filtering and printing technologies employing plasmonic nanostructures have recently been recognized as an important and beneficial complement to the traditional colorant-based pigmentation. However, the color saturation, brightness and incident angle tolerance of structural color printing need to be improved to meet the application requirement. Here we demonstrate a structural color printing method based on plasmonic metasurfaces of perfect light absorption to improve color performances such as saturation and brightness. Thin-layer perfect absorbers with periodic hole arrays are designed at visible frequencies and the absorption peaks are tuned by simply adjusting the hole size and periodicity. Near perfect light absorption with high quality factors are obtained to realize high-resolution, angle-insensitive plasmonic color printing with high color saturation and brightness. Moreover, the fabricated metasurfaces can be protected with a protective coating for ambient use without degrading performances. The demonstrated structural color printing platform offers great potential for applications ranging from security marking to information storage. Scientific Reports 5 doi: 10.1038/srep11045

Description: The electron and spin polarized transport properties of Co benzene-porphyrin-benzene (BPB) molecule coupled to gold (Au) nanowires in a wide voltage range (0–3.0 V) are investigated. By successively removing the front-end Au atoms, we construct Au nanowires with different molecule-electrode contact symmetries. Multiple negative differential resistance (NDR) peaks emerge at different bias voltage regions. It is found that the low-voltage NDR effect at 0.4 V can only be found in the junctions with S–Au top bindings. High-bias NDR effects intrinsic to central molecule at 2.8 V are observed in all the six structures. In particular, both the electron and spin polarized current-voltage (I–V) curves depend strongly on the contact configurations between Co-BPB molecule and the Au electrodes. And the top-binding may result in spin dependent transport properties and will be the priority selection in the design of molecular devices.

Description: Viscous flow behavior of silica melts on an uncooled carbon/silicon carbide composite nozzle was investigated in the combustion environment of a liquid-fueled rocket engine simulated by an ethanol/oxygen combustion gas generator. The results showed that severe ablation of the nozzle throat were attributed to flow downstream and blow-off of the silica scales derived from vigorous oxidation of the silicon carbide matrix. The viscous flow behavior of the silica was determined by both the intrinsic viscosity of silica melts and the external aerodynamic forces of the combustion gas.

Description: The electronic transport properties of benzene–porphyrin–benzene (BPB) molecules coupled to gold (Au) electrodes were investigated. By successively removing the front-end Au atoms, several BPB junctions with different molecule-electrode contact symmetries were constructed. The calculated current–voltage (I–V) curves depended strongly on the contact configurations between the BPB molecules and the Au electrodes. In particular, a significant low-voltage negative differential resistance effect appeared at −0.3 V in the junctions with pyramidal electrodes on both sides. Along with the breaking of this tip-contact symmetry, the low-bias negative differential resistance effect gradually disappeared. This tip-contact may be ideal for use in the design of future molecular devices because of its similarity with experimental processes.

Description: Test question has already become an important factor to restrict the development of integrated circuit industry. A new test data compression scheme, namely irrational numbers stored (INS), is presented. To achieve the goal of compress test data efficiently, test data is converted into floating-point numbers, stored in the form of irrational numbers. The algorithm of converting floating-point number to irrational number precisely is given. Experimental results for some ISCAS 89 benchmarks show that the compression effect of proposed scheme is better than the coding methods such as FDR, AARLC, INDC, FAVLC, and VRL.

Description: Electronic structures and coherent quantum transport properties are explored for spin-crossover molecule iron-benzene Fe(Bz) 2 using density functional theory combined with non-equilibrium Green’s function. High- and low-spin states are investigated for two different lead-molecule junctions. It is found that the asymmetrical T-shaped contact junction in the high-spin state behaves as an efficient spin filter while it has a smaller conductivity than that in the low-spin state. Large spin Seebeck effect is also observed in asymmetrical T-shaped junction. Spin-polarized properties are absent in the symmetrical H-shaped junction. These findings strongly suggest that both the electronic and contact configurations play significant roles in molecular devices and metal-benzene complexes are promising materials for spintronics and thermo-spintronics.

Description: The Journal of Organic Chemistry DOI: 10.1021/acs.joc.8b01843

Description: Symmetry, Vol. 9, Pages 151: Selecting Project Delivery Systems Based on Simplified Neutrosophic Linguistic Preference Relations Symmetry doi: 10.3390/sym9080151 Authors: Sui-Zhi Luo Peng-Fei Cheng Jian-Qiang Wang Yuan-Ji Huang Project delivery system selection is an essential part of project management. In the process of choosing appropriate transaction model, many factors should be under consideration, such as the capability and experience of proprietors, project implementation risk, and so on. How to make their comprehensive evaluations and select the optimal delivery system? This paper proposes a decision-making approach based on an extended linguistic preference structure: simplified neutrosophic linguistic preference relations (SNLPRs). The basic elements in SNLPRs are simplified neutrosophic linguistic numbers (SNLNs). First, several distance measures of SNLNs are introduced. A distance-based consistency index is provided to measure the consistency degree of a simplified neutrosophic linguistic preference relation (SNLPR). When the SNLPR is not acceptably consistent, a consistency-improving automatic iterative algorithm may be used. Afterwards, a decision-making method with SNLPRs is developed. The example of its application in project delivery systems’ selection is offered, and a comparison analysis is given in the end as well.