ISSN:
1573-4803
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract The structural and electrical properties of antiferroelectric lead zirconate thin films were investigated. The films were prepared by a reactive magnetron co-sputtering method followed by rapid thermal annealing. The crystallized films showed (240) preferred orientation on platinum-coated silicon substrates. The lead content in the films was found to affect the crystallization temperatures, the preferred orientation, the film morphology and the electrical properties. In particular, the hysteresis behaviour is sensitive to the amount of lead. The electric field forced transformation from the antiferroelectric phase to the ferroelectric phase was very similar to that observed in single crystals at room temperature, with a maximum polarization value of 70 μC cm-2. The average field required to excite the ferroelectric state and that for reversion to the antiferroelectric state were 290 kV cm-1 and 180 kV cm-1 respectively. The dielectric constant was 200 with an associated loss of 0.05 at 1 MHz. The Curie temperature was 248°C at 1 kHz. The conduction mechanism of the films was similar to that observed for lead zirconate titanate films.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1023/A:1018681803862
Permalink