ISSN:
0003-3146
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Chemistry and Pharmacology
,
Physics
Description / Table of Contents:
Ein gesättigtes, alicyclisches Kohlenwasserstoffharz (IST) wurde mit isotaktischem Polypropylen (iPP) gemischt. IST ist ein Co-Oligomeres mit niedrigem mittlerem Molekulargewicht, das durch Oligomerisation von Inden, α-Methylstyrol und Vinyltoluol und anschließende Hydrierung erhalten wurde.Die Kristallisation und das thermische Verhalten von iPP/IST-Mischungen wurden sowohl mikroskopisch wie auch mittels Differentialkalorimetrie (DSC) untersucht. Der Einfluß der Zusammensetzung der Mischung auf die Wachstumsgeschwindigkeit der Sphärolite und auf die Kristallisationsgeschwindigkeit weist daraufhin, daß beide Bestandteile in der amorphen Phase vollständig mischbar sind, was durch folgende Beobachtungen bestätigt wird: Alle Mischungen zeigen eine einzige Glasübergangstemperatur (Tg), die, je nach Zusammensetzung, zwischen den entsprechenden Tg des iPP und des IST (-14°C bzw. 82°C) liegt. Außerdem stimmt die gemessene Tg gut mit den nach der Fox-Gleichung theoretisch ermittelten Tg-Werten überein. Die für reines iPP errechnete Gleichgewichtschmelztemperatur betragt 187°C; dieser Wert nimmt beim Mischen bis auf 175°C für die Mischung iPP/IST 50/50 (w/w) ab. Der χ12 Parameter des iPP/IST-Systems betragt -0,435. Der negative Wert könnte darauf hinweisen, daß beide Bestandteile eine verträgliche Mischung zu bilden vermögen, die sich oberhalb der Gleichgewichtschmelztemperatur als thermodynamisch stabil erweist.
Notes:
A fully saturated, alicyclic hydrocarbon resin (IST) was blended with isotactic polypropylene (iPP). IST is a random co-oligomer of low average molecular weight obtained by oligomerization of indene, α-methyl styrene and vinyl toluene, followed by hydrogenation.The crystallization and thermal behaviour of iPP/IST blends were analyzed by microscopy and differential scanning calorimetry (DSC). The influence of blend composition on the spherulite growth rate and on the overall crystallization rate suggests that the two components form a miscible blend in the amorphous phase, as confirmed by the following observations: All blends show a single glass transition temperature (Tg); its value, depending on composition, lies between the iPP and IST Tg values (-14°C and 82°C, respectively), and is in good agreement with the theoretical values calculated by the Fox equation. The equilibrium melting temperature calculated for pure iPP was equal to 187°C; this value decreases with blending to 175°C for the iPP/IST 50/50 (w/w) blend. The χ12 parameter of the iPP/IST system was equal to -0.435, the negative value should suggest that the two components can form a compatible mixture which is thermodynamically stable above the equilibrium melting temperature.
Additional Material:
7 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/apmc.1992.051970105
Permalink