ALBERT

Description: NASA's Small Spacecraft Systems Virtual Institute (S3VI) is collaborating with the Air Force Research Laboratory and Space Dynamics Laboratory on the development of a small spacecraft parts database called SmallSat Parts On Orbit Now (SPOON). The SPOON database contains small spacecraft parts and technologies categorized by major satellite subsystems developed by industry, academia and government. The State of the Art of Small Spacecraft Technology report reflects small spacecraft parts submitted to the SPOON database and technologies compiled from other sources that were assessed as the current state of the art in each of the major subsystems. The report, first commissioned by NASA's Small Spacecraft Technology Program in mid-2013, is developed in response to the continuing growth in interest in using small spacecraft for many types of missions in Earth orbit and beyond. Due to the high market penetration of CubeSats, particular emphasis is placed on the state of the art of CubeSat-related technology. The 2018 report is planned for release in late summer. A review of SPOON database functionality, federation of additional NASA-internal and external databases along with a common search capability, as well as an overview of the State of the Art of Small Spacecraft Technology report will be presented. The S3VI is jointly sponsored by NASA's Space Technology Mission Directorate and Science Mission Directorate.

Description: The Asteroid Threat Assessment Project (ATAP), a part of NASAs Planetary Defense Coordination Office (PDCO) has the responsibility to appraise the range of surface damage by potential asteroid impacts on land or water. If a threat is realized, the project will provide appraisals to officials empowered to make decisions on potential mitigation actions. This paper describes a scenario for assessment of surface damage when characterization of an asteroid had been accomplished by a rendezvous mission that would be conducted by the international planetary defense community. It is shown that the combination of data from ground and in-situ measurements on an asteroid provides knowledge that can be used to pin-point its impact location and predict the level of devastation it would cause. The hypothetical asteroid 2017 PDC with a size of 160 to 290 m in diameter to be discussed at the PDC 2017 meeting is used as an example. In order of importance for appraising potential damage, information required is: (1) where will the surface impact occur? (2) What is the mass, shape and size of the asteroid and what is its entry state (speed and entry angle) at the 100 km atmospheric pierce point? And (3) is the asteroid a monolith or a rubble pile? If it is a rubble pile, what is its sub and interior structure? Item (1) is of first order importance to determine levels of devastation (loss of life and infrastructure damage) because it varies strongly on the impact location. Items (2) and (3) are used as input for ATAPs simulations to define the level of surface hazards: winds, overpressure, thermal exposure; all created by the deposition of energy during the objects atmospheric flight, and/or cratering. Topics presented in this paper include: (i) The devastation predicted by 2017 PDCs impact based on initial observations using ATAPs risk assessment capability, (ii) How information corresponding to items (1) to (3) could be obtained from a rendezvous mission, and (iii) How information from a rendezvous mission could be used, along with that from ground observations and data from the literature, could provide input for an new risk analysis capability that is emerging from ATAPs research. It is concluded that this approach would result in appraisal with the least uncertainty possible (herein called the best-case) using simulation capabilities that are currently available or will be in the future.

Description: The Asteroid Threat Assessment Project (ATAP), a part of NASAs Planetary Defense Coordination Office (PDCO) has the responsibility to appraise the range of surface damage by potential asteroid impacts on land or water. If a threat is realized, the project will provide appraisals to officials empowered to make decisions about potential mitigation actions. This paper describes a scenario for assessment of surface damage when characterization of an asteroid had been accomplished by a rendezvous mission that would be conducted by the international planetary defense community. It is shown that the combination of data from ground and in-situ measurements on an asteroid provides knowledge that can be used to pin-point its impact location and predict the level of devastation it would cause. The hypothetical asteroid 2017 PDC with a size range of 160 to 290 m in diameter to be discussed at the PDC 2017 is used as an example. In order of importance for appraising potential damage, information required is: (1) where will the surface impact occur? (2) what is the mass, shape and size of the asteroid and what is its entry state (speed and entry angle) at the 100 km atmospheric pierce point? And (3) is the asteroid a monolith or a rubble pile? If it is a rubble pile, what is its structure and heterogeneity from the surface and throughout its interior? Item (1) is of first order importance to determine levels of devastation (loss of life and infrastructure damage) because it varies strongly on the impact location. Items (2) and (3) are used as inputs for ATAPs simulations to define the level of surface hazards: winds, overpressure, thermal exposure; all created by the deposition of energy during the objects atmospheric flight, andor cratering. Topics presented in this paper include: (i) the devastation predicted by 2017 PDCs impact on land based on initial observations using ATAPs risk assessment capability, (ii) how information corresponding to items (1) to (3) could be obtained from a rendezvous mission, and (iii) how information from a rendezvous mission could be used, along with that from ground observations and data from the literature to provide input for a new risk analysis capability that is emerging from ATAPs research. It is concluded that this approach would result in the creation of an appraisal of the threat from 2017 PDC with the least uncertainty possible, herein called the best-case.